void SEGZONE::Draw( EDA_DRAW_PANEL* panel, wxDC* aDC, GR_DRAWMODE aDrawMode,
const wxPoint& aOffset )
{
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)panel->GetDisplayOptions();
if( displ_opts->m_DisplayZonesMode != 0 )
return;
BOARD * brd = GetBoard( );
EDA_COLOR_T color = brd->GetLayerColor(m_Layer);
if( brd->IsLayerVisible( m_Layer ) == false && !( aDrawMode & GR_HIGHLIGHT ) )
return;
#ifdef USE_WX_OVERLAY
// If dragged not draw in OnPaint otherwise remains impressed in wxOverlay
if( (m_Flags & IS_DRAGGED) && aDC->IsKindOf(wxCLASSINFO(wxPaintDC)))
return;
#endif
if( ( aDrawMode & GR_ALLOW_HIGHCONTRAST ) && displ_opts->m_ContrastModeDisplay )
{
LAYER_ID curr_layer = ( (PCB_SCREEN*) panel->GetScreen() )->m_Active_Layer;
if( !IsOnLayer( curr_layer ) )
ColorTurnToDarkDarkGray( &color );
}
if( aDrawMode & GR_HIGHLIGHT )
ColorChangeHighlightFlag( &color, !(aDrawMode & GR_AND) );
ColorApplyHighlightFlag( &color );
SetAlpha( &color, 150 );
GRSetDrawMode( aDC, aDrawMode );
int l_trace = m_Width / 2;
if( aDC->LogicalToDeviceXRel( l_trace ) <= MIN_DRAW_WIDTH )
{
GRLine( panel->GetClipBox(), aDC, m_Start + aOffset, m_End + aOffset, 0, color );
return;
}
if( !displ_opts->m_DisplayPcbTrackFill || GetState( FORCE_SKETCH ) )
{
GRCSegm( panel->GetClipBox(), aDC, m_Start + aOffset, m_End + aOffset, m_Width, color );
}
else
{
GRFillCSegm( panel->GetClipBox(), aDC, m_Start.x + aOffset.x,
m_Start.y + aOffset.y,
m_End.x + aOffset.x, m_End.y + aOffset.y, m_Width, color );
}
// No clearance or netnames for zones
}
void TEXTE_PCB::Draw( EDA_DRAW_PANEL* panel, wxDC* DC,
GR_DRAWMODE DrawMode, const wxPoint& offset )
{
BOARD* brd = GetBoard();
if( brd->IsLayerVisible( m_Layer ) == false )
return;
EDA_COLOR_T color = brd->GetLayerColor( m_Layer );
EDA_DRAW_MODE_T fillmode = FILLED;
DISPLAY_OPTIONS* displ_opts =
panel ? (DISPLAY_OPTIONS*)panel->GetDisplayOptions() : NULL;
if( displ_opts && displ_opts->m_DisplayDrawItemsFill == SKETCH )
fillmode = SKETCH;
// shade text if high contrast mode is active
if( ( DrawMode & GR_ALLOW_HIGHCONTRAST ) && displ_opts && displ_opts->m_ContrastModeDisplay )
{
LAYER_ID curr_layer = ( (PCB_SCREEN*) panel->GetScreen() )->m_Active_Layer;
if( !IsOnLayer( curr_layer ) )
ColorTurnToDarkDarkGray( &color );
}
EDA_COLOR_T anchor_color = UNSPECIFIED_COLOR;
if( brd->IsElementVisible( ANCHOR_VISIBLE ) )
anchor_color = brd->GetVisibleElementColor( ANCHOR_VISIBLE );
EDA_RECT* clipbox = panel? panel->GetClipBox() : NULL;
EDA_TEXT::Draw( clipbox, DC, offset, color,
DrawMode, fillmode, anchor_color );
// Enable these line to draw the bounding box (debug tests purposes only)
#if 0
{
EDA_RECT BoundaryBox = GetBoundingBox();
GRRect( clipbox, DC, BoundaryBox, 0, BROWN );
}
#endif
}
void ZONE_CONTAINER::DrawWhileCreateOutline( EDA_DRAW_PANEL* panel, wxDC* DC,
GR_DRAWMODE draw_mode )
{
GR_DRAWMODE current_gr_mode = draw_mode;
bool is_close_segment = false;
wxPoint seg_start, seg_end;
if( DC == NULL )
return;
LAYER_NUM curr_layer = ( (PCB_SCREEN*) panel->GetScreen() )->m_Active_Layer;
BOARD* brd = GetBoard();
EDA_COLOR_T color = brd->GetLayerColor( m_Layer );
if( DisplayOpt.ContrastModeDisplay )
{
if( !IsOnLayer( curr_layer ) )
ColorTurnToDarkDarkGray( &color );
}
// draw the lines
wxPoint start_contour_pos = GetCornerPosition( 0 );
int icmax = GetNumCorners() - 1;
for( int ic = 0; ic <= icmax; ic++ )
{
int xi = GetCornerPosition( ic ).x;
int yi = GetCornerPosition( ic ).y;
int xf, yf;
if( !m_Poly->m_CornersList.IsEndContour( ic ) && ic < icmax )
{
is_close_segment = false;
xf = GetCornerPosition( ic + 1 ).x;
yf = GetCornerPosition( ic + 1 ).y;
if( m_Poly->m_CornersList.IsEndContour( ic + 1 ) || (ic == icmax - 1) )
current_gr_mode = GR_XOR;
else
current_gr_mode = draw_mode;
}
else // Draw the line from last corner to the first corner of the current contour
{
is_close_segment = true;
current_gr_mode = GR_XOR;
xf = start_contour_pos.x;
yf = start_contour_pos.y;
// Prepare the next contour for drawing, if exists
if( ic < icmax )
start_contour_pos = GetCornerPosition( ic + 1 );
}
GRSetDrawMode( DC, current_gr_mode );
if( is_close_segment )
GRLine( panel->GetClipBox(), DC, xi, yi, xf, yf, 0, WHITE );
else
GRLine( panel->GetClipBox(), DC, xi, yi, xf, yf, 0, color );
}
}
void ZONE_CONTAINER::DrawFilledArea( EDA_DRAW_PANEL* panel,
wxDC* DC, GR_DRAWMODE aDrawMode, const wxPoint& offset )
{
static std::vector <char> CornersTypeBuffer;
static std::vector <wxPoint> CornersBuffer;
// outline_mode is false to show filled polys,
// and true to show polygons outlines only (test and debug purposes)
bool outline_mode = DisplayOpt.DisplayZonesMode == 2 ? true : false;
if( DC == NULL )
return;
if( DisplayOpt.DisplayZonesMode == 1 ) // Do not show filled areas
return;
if( m_FilledPolysList.GetCornersCount() == 0 ) // Nothing to draw
return;
BOARD* brd = GetBoard();
LAYER_NUM curr_layer = ( (PCB_SCREEN*) panel->GetScreen() )->m_Active_Layer;
EDA_COLOR_T color = brd->GetLayerColor( m_Layer );
if( brd->IsLayerVisible( m_Layer ) == false && ( color & HIGHLIGHT_FLAG ) != HIGHLIGHT_FLAG )
return;
GRSetDrawMode( DC, aDrawMode );
if( DisplayOpt.ContrastModeDisplay )
{
if( !IsOnLayer( curr_layer ) )
ColorTurnToDarkDarkGray( &color );
}
if( aDrawMode & GR_HIGHLIGHT )
ColorChangeHighlightFlag( &color, !(aDrawMode & GR_AND) );
ColorApplyHighlightFlag( &color );
SetAlpha( &color, 150 );
CornersTypeBuffer.clear();
CornersBuffer.clear();
// Draw all filled areas
int imax = m_FilledPolysList.GetCornersCount() - 1;
for( int ic = 0; ic <= imax; ic++ )
{
const CPolyPt& corner = m_FilledPolysList.GetCorner( ic );
wxPoint coord( corner.x + offset.x, corner.y + offset.y );
CornersBuffer.push_back( coord );
CornersTypeBuffer.push_back( (char) corner.m_utility );
// the last corner of a filled area is found: draw it
if( (corner.end_contour) || (ic == imax) )
{
/* Draw the current filled area: draw segments outline first
* Curiously, draw segments outline first and after draw filled polygons
* with outlines thickness = 0 is a faster than
* just draw filled polygons but with outlines thickness = m_ZoneMinThickness
* So DO NOT use draw filled polygons with outlines having a thickness > 0
* Note: Extra segments ( added to joint holes with external outline) flagged by
* m_utility != 0 are not drawn
* Note not all polygon libraries provide a flag for these extra-segments, therefore
* the m_utility member can be always 0
*/
{
// Draw outlines:
if( (m_ZoneMinThickness > 1) || outline_mode )
{
int ilim = CornersBuffer.size() - 1;
for( int is = 0, ie = ilim; is <= ilim; ie = is, is++ )
{
int x0 = CornersBuffer[is].x;
int y0 = CornersBuffer[is].y;
int x1 = CornersBuffer[ie].x;
int y1 = CornersBuffer[ie].y;
// Draw only basic outlines, not extra segments.
if( CornersTypeBuffer[ie] == 0 )
{
if( !DisplayOpt.DisplayPcbTrackFill || GetState( FORCE_SKETCH ) )
GRCSegm( panel->GetClipBox(), DC,
x0, y0, x1, y1,
m_ZoneMinThickness, color );
else
GRFillCSegm( panel->GetClipBox(), DC,
x0, y0, x1, y1,
m_ZoneMinThickness, color );
}
}
}
// Draw areas:
if( m_FillMode==0 && !outline_mode )
GRPoly( panel->GetClipBox(), DC, CornersBuffer.size(), &CornersBuffer[0],
true, 0, color, color );
}
CornersTypeBuffer.clear();
CornersBuffer.clear();
}
}
if( m_FillMode == 1 && !outline_mode ) // filled with segments
{
for( unsigned ic = 0; ic < m_FillSegmList.size(); ic++ )
{
wxPoint start = m_FillSegmList[ic].m_Start + offset;
wxPoint end = m_FillSegmList[ic].m_End + offset;
if( !DisplayOpt.DisplayPcbTrackFill || GetState( FORCE_SKETCH ) )
GRCSegm( panel->GetClipBox(), DC, start.x, start.y, end.x, end.y,
m_ZoneMinThickness, color );
else
GRFillCSegm( panel->GetClipBox(), DC, start.x, start.y, end.x, end.y,
m_ZoneMinThickness, color );
}
}
}
void ZONE_CONTAINER::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE aDrawMode,
const wxPoint& offset )
{
if( DC == NULL )
return;
wxPoint seg_start, seg_end;
LAYER_NUM curr_layer = ( (PCB_SCREEN*) panel->GetScreen() )->m_Active_Layer;
BOARD* brd = GetBoard();
EDA_COLOR_T color = brd->GetLayerColor( m_Layer );
if( brd->IsLayerVisible( m_Layer ) == false && ( color & HIGHLIGHT_FLAG ) != HIGHLIGHT_FLAG )
return;
GRSetDrawMode( DC, aDrawMode );
if( DisplayOpt.ContrastModeDisplay )
{
if( !IsOnLayer( curr_layer ) )
ColorTurnToDarkDarkGray( &color );
}
if( aDrawMode & GR_HIGHLIGHT )
ColorChangeHighlightFlag( &color, !(aDrawMode & GR_AND) );
ColorApplyHighlightFlag( &color );
SetAlpha( &color, 150 );
// draw the lines
int i_start_contour = 0;
std::vector<wxPoint> lines;
lines.reserve( (GetNumCorners() * 2) + 2 );
for( int ic = 0; ic < GetNumCorners(); ic++ )
{
seg_start = GetCornerPosition( ic ) + offset;
if( !m_Poly->m_CornersList.IsEndContour( ic ) && ic < GetNumCorners() - 1 )
{
seg_end = GetCornerPosition( ic + 1 ) + offset;
}
else
{
seg_end = GetCornerPosition( i_start_contour ) + offset;
i_start_contour = ic + 1;
}
lines.push_back( seg_start );
lines.push_back( seg_end );
}
GRLineArray( panel->GetClipBox(), DC, lines, 0, color );
// draw hatches
lines.clear();
lines.reserve( (m_Poly->m_HatchLines.size() * 2) + 2 );
for( unsigned ic = 0; ic < m_Poly->m_HatchLines.size(); ic++ )
{
seg_start = m_Poly->m_HatchLines[ic].m_Start + offset;
seg_end = m_Poly->m_HatchLines[ic].m_End + offset;
lines.push_back( seg_start );
lines.push_back( seg_end );
}
GRLineArray( panel->GetClipBox(), DC, lines, 0, color );
}
void EDGE_MODULE::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE draw_mode,
const wxPoint& offset )
{
int ux0, uy0, dx, dy, radius, StAngle, EndAngle;
int typeaff;
LAYER_ID curr_layer = ( (PCB_SCREEN*) panel->GetScreen() )->m_Active_Layer;
MODULE* module = (MODULE*) m_Parent;
if( !module )
return;
BOARD* brd = GetBoard( );
if( brd->IsLayerVisible( m_Layer ) == false )
return;
EDA_COLOR_T color = brd->GetLayerColor( m_Layer );
if(( draw_mode & GR_ALLOW_HIGHCONTRAST ) && DisplayOpt.ContrastModeDisplay )
{
if( !IsOnLayer( curr_layer ) )
ColorTurnToDarkDarkGray( &color );
}
PCB_BASE_FRAME* frame = (PCB_BASE_FRAME*) panel->GetParent();
ux0 = m_Start.x - offset.x;
uy0 = m_Start.y - offset.y;
dx = m_End.x - offset.x;
dy = m_End.y - offset.y;
GRSetDrawMode( DC, draw_mode );
typeaff = frame->m_DisplayModEdge;
if( IsCopperLayer( m_Layer ) )
{
typeaff = frame->m_DisplayPcbTrackFill;
if( !typeaff )
typeaff = SKETCH;
}
if( DC->LogicalToDeviceXRel( m_Width ) <= MIN_DRAW_WIDTH )
typeaff = LINE;
switch( m_Shape )
{
case S_SEGMENT:
if( typeaff == LINE )
GRLine( panel->GetClipBox(), DC, ux0, uy0, dx, dy, 0, color );
else if( typeaff == FILLED )
GRLine( panel->GetClipBox(), DC, ux0, uy0, dx, dy, m_Width, color );
else
// SKETCH Mode
GRCSegm( panel->GetClipBox(), DC, ux0, uy0, dx, dy, m_Width, color );
break;
case S_CIRCLE:
radius = KiROUND( Distance( ux0, uy0, dx, dy ) );
if( typeaff == LINE )
{
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius, color );
}
else
{
if( typeaff == FILLED )
{
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius, m_Width, color );
}
else // SKETCH Mode
{
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius + (m_Width / 2), color );
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius - (m_Width / 2), color );
}
}
break;
case S_ARC:
radius = KiROUND( Distance( ux0, uy0, dx, dy ) );
StAngle = ArcTangente( dy - uy0, dx - ux0 );
EndAngle = StAngle + m_Angle;
if( !panel->GetPrintMirrored() )
{
if( StAngle > EndAngle )
EXCHG( StAngle, EndAngle );
}
else // Mirrored mode: arc orientation is reversed
{
if( StAngle < EndAngle )
EXCHG( StAngle, EndAngle );
}
if( typeaff == LINE )
{
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle, radius, color );
}
else if( typeaff == FILLED )
{
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle, radius, m_Width, color );
}
else // SKETCH Mode
{
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle,
radius + (m_Width / 2), color );
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle,
radius - (m_Width / 2), color );
}
break;
case S_POLYGON:
{
// We must compute true coordinates from m_PolyPoints
// which are relative to module position, orientation 0
std::vector<wxPoint> points = m_PolyPoints;
for( unsigned ii = 0; ii < points.size(); ii++ )
{
wxPoint& pt = points[ii];
RotatePoint( &pt.x, &pt.y, module->GetOrientation() );
pt += module->GetPosition() - offset;
}
GRPoly( panel->GetClipBox(), DC, points.size(), &points[0], true, m_Width, color, color );
}
break;
default:
break;
}
}
void TEXTE_MODULE::Draw( EDA_DRAW_PANEL* aPanel, wxDC* aDC, GR_DRAWMODE aDrawMode,
const wxPoint& aOffset )
{
if( aPanel == NULL )
return;
/* parent must *not* be NULL (a footprint text without a footprint
parent has no sense) */
wxASSERT( m_Parent );
BOARD* brd = GetBoard( );
EDA_COLOR_T color = brd->GetLayerColor( GetLayer() );
LAYER_ID text_layer = GetLayer();
if( !brd->IsLayerVisible( m_Layer )
|| (IsFrontLayer( text_layer ) && !brd->IsElementVisible( MOD_TEXT_FR_VISIBLE ))
|| (IsBackLayer( text_layer ) && !brd->IsElementVisible( MOD_TEXT_BK_VISIBLE )) )
return;
// Invisible texts are still drawn (not plotted) in MOD_TEXT_INVISIBLE
// Just because we must have to edit them (at least to make them visible)
if( m_NoShow )
{
if( !brd->IsElementVisible( MOD_TEXT_INVISIBLE ) )
return;
color = brd->GetVisibleElementColor( MOD_TEXT_INVISIBLE );
}
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)aPanel->GetDisplayOptions();
// shade text if high contrast mode is active
if( ( aDrawMode & GR_ALLOW_HIGHCONTRAST ) && displ_opts && displ_opts->m_ContrastModeDisplay )
{
LAYER_ID curr_layer = ( (PCB_SCREEN*) aPanel->GetScreen() )->m_Active_Layer;
if( !IsOnLayer( curr_layer ) )
ColorTurnToDarkDarkGray( &color );
}
// Draw mode compensation for the width
int width = m_Thickness;
if( displ_opts && displ_opts->m_DisplayModTextFill == SKETCH )
width = -width;
GRSetDrawMode( aDC, aDrawMode );
wxPoint pos = m_Pos - aOffset;
// Draw the text anchor point
if( brd->IsElementVisible( ANCHOR_VISIBLE ) )
{
EDA_COLOR_T anchor_color = brd->GetVisibleElementColor(ANCHOR_VISIBLE);
GRDrawAnchor( aPanel->GetClipBox(), aDC, pos.x, pos.y, DIM_ANCRE_TEXTE, anchor_color );
}
// Draw the text proper, with the right attributes
wxSize size = m_Size;
double orient = GetDrawRotation();
// If the text is mirrored : negate size.x (mirror / Y axis)
if( m_Mirror )
size.x = -size.x;
DrawGraphicText( aPanel->GetClipBox(), aDC, pos, color, GetShownText(), orient,
size, m_HJustify, m_VJustify, width, m_Italic, m_Bold );
// Enable these line to draw the bounding box (debug test purpose only)
#if 0
{
EDA_RECT BoundaryBox = GetBoundingBox();
GRRect( aPanel->GetClipBox(), aDC, BoundaryBox, 0, BROWN );
}
#endif
}
void VIA::Draw( EDA_DRAW_PANEL* panel, wxDC* aDC, GR_DRAWMODE aDrawMode,
const wxPoint& aOffset )
{
int radius;
LAYER_NUM curr_layer = ( (PCB_SCREEN*) panel->GetScreen() )->m_Active_Layer;
int fillvia = 0;
PCB_BASE_FRAME* frame = (PCB_BASE_FRAME*) panel->GetParent();
PCB_SCREEN* screen = frame->GetScreen();
if( frame->m_DisplayViaFill == FILLED )
fillvia = 1;
GRSetDrawMode( aDC, aDrawMode );
BOARD * brd = GetBoard( );
EDA_COLOR_T color = brd->GetVisibleElementColor(VIAS_VISIBLE + GetViaType());
if( brd->IsElementVisible( PCB_VISIBLE(VIAS_VISIBLE + GetViaType()) ) == false
&& ( color & HIGHLIGHT_FLAG ) != HIGHLIGHT_FLAG )
return;
if( DisplayOpt.ContrastModeDisplay )
{
if( !IsOnLayer( curr_layer ) )
ColorTurnToDarkDarkGray( &color );
}
if( aDrawMode & GR_HIGHLIGHT )
ColorChangeHighlightFlag( &color, !(aDrawMode & GR_AND) );
ColorApplyHighlightFlag( &color );
SetAlpha( &color, 150 );
radius = m_Width >> 1;
// for small via size on screen (radius < 4 pixels) draw a simplified shape
int radius_in_pixels = aDC->LogicalToDeviceXRel( radius );
bool fast_draw = false;
// Vias are drawn as a filled circle or a double circle. The hole will be drawn later
int drill_radius = GetDrillValue() / 2;
int inner_radius = radius - aDC->DeviceToLogicalXRel( 2 );
if( radius_in_pixels < MIN_VIA_DRAW_SIZE )
{
fast_draw = true;
fillvia = false;
}
if( fillvia )
{
GRFilledCircle( panel->GetClipBox(), aDC, m_Start + aOffset, radius, color );
}
else
{
GRCircle( panel->GetClipBox(), aDC, m_Start + aOffset, radius, 0, color );
if ( fast_draw )
return;
GRCircle( panel->GetClipBox(), aDC, m_Start + aOffset, inner_radius, 0, color );
}
// Draw the via hole if the display option allows it
if( DisplayOpt.m_DisplayViaMode != VIA_HOLE_NOT_SHOW )
{
// Display all drill holes requested or Display non default holes requested
if( (DisplayOpt.m_DisplayViaMode == ALL_VIA_HOLE_SHOW)
|| ( (drill_radius > 0 ) && !IsDrillDefault() ) )
{
if( fillvia )
{
bool blackpenstate = false;
if( screen->m_IsPrinting )
{
blackpenstate = GetGRForceBlackPenState();
GRForceBlackPen( false );
color = WHITE;
}
else
{
color = BLACK; // or DARKGRAY;
}
if( (aDrawMode & GR_XOR) == 0)
GRSetDrawMode( aDC, GR_COPY );
if( aDC->LogicalToDeviceXRel( drill_radius ) > MIN_DRAW_WIDTH ) // Draw hole if large enough.
GRFilledCircle( panel->GetClipBox(), aDC, m_Start.x + aOffset.x,
m_Start.y + aOffset.y, drill_radius, 0, color, color );
if( screen->m_IsPrinting )
GRForceBlackPen( blackpenstate );
}
else
{
if( drill_radius < inner_radius ) // We can show the via hole
GRCircle( panel->GetClipBox(), aDC, m_Start + aOffset, drill_radius, 0, color );
}
}
}
if( ShowClearance( this ) )
{
GRCircle( panel->GetClipBox(), aDC, m_Start + aOffset, radius + GetClearance(), 0, color );
}
// for Micro Vias, draw a partial cross : X on component layer, or + on copper layer
// (so we can see 2 superimposed microvias ):
if( GetViaType() == VIA_MICROVIA )
{
int ax, ay, bx, by;
if( IsOnLayer( LAYER_N_BACK ) )
{
ax = radius; ay = 0;
bx = drill_radius; by = 0;
}
else
{
ax = ay = (radius * 707) / 1000;
bx = by = (drill_radius * 707) / 1000;
}
/* lines | or \ */
GRLine( panel->GetClipBox(), aDC, m_Start.x + aOffset.x - ax,
m_Start.y + aOffset.y - ay,
m_Start.x + aOffset.x - bx,
m_Start.y + aOffset.y - by, 0, color );
GRLine( panel->GetClipBox(), aDC, m_Start.x + aOffset.x + bx,
m_Start.y + aOffset.y + by,
m_Start.x + aOffset.x + ax,
m_Start.y + aOffset.y + ay, 0, color );
// lines - or /
GRLine( panel->GetClipBox(), aDC, m_Start.x + aOffset.x + ay,
m_Start.y + aOffset.y - ax,
m_Start.x + aOffset.x + by,
m_Start.y + aOffset.y - bx, 0, color );
GRLine( panel->GetClipBox(), aDC, m_Start.x + aOffset.x - by,
m_Start.y + aOffset.y + bx,
m_Start.x + aOffset.x - ay,
m_Start.y + aOffset.y + ax, 0, color );
}
// for Buried Vias, draw a partial line : orient depending on layer pair
// (so we can see superimposed buried vias ):
if( GetViaType() == VIA_BLIND_BURIED )
{
int ax = 0, ay = radius, bx = 0, by = drill_radius;
LAYER_NUM layer_top, layer_bottom;
( (VIA*) this )->LayerPair( &layer_top, &layer_bottom );
// lines for the top layer
RotatePoint( &ax, &ay, layer_top * 3600.0 / brd->GetCopperLayerCount( ) );
RotatePoint( &bx, &by, layer_top * 3600.0 / brd->GetCopperLayerCount( ) );
GRLine( panel->GetClipBox(), aDC, m_Start.x + aOffset.x - ax,
m_Start.y + aOffset.y - ay,
m_Start.x + aOffset.x - bx,
m_Start.y + aOffset.y - by, 0, color );
// lines for the bottom layer
ax = 0; ay = radius; bx = 0; by = drill_radius;
RotatePoint( &ax, &ay, layer_bottom * 3600.0 / brd->GetCopperLayerCount( ) );
RotatePoint( &bx, &by, layer_bottom * 3600.0 / brd->GetCopperLayerCount( ) );
GRLine( panel->GetClipBox(), aDC, m_Start.x + aOffset.x - ax,
m_Start.y + aOffset.y - ay,
m_Start.x + aOffset.x - bx,
m_Start.y + aOffset.y - by, 0, color );
}
// Display the short netname:
if( GetNetCode() == NETINFO_LIST::UNCONNECTED )
return;
if( DisplayOpt.DisplayNetNamesMode == 0 || DisplayOpt.DisplayNetNamesMode == 1 )
return;
NETINFO_ITEM* net = GetNet();
if( net == NULL )
return;
int len = net->GetShortNetname().Len();
if( len > 0 )
{
// calculate a good size for the text
int tsize = m_Width / len;
if( aDC->LogicalToDeviceXRel( tsize ) >= MIN_TEXT_SIZE )
{
tsize = (tsize * 7) / 10; // small reduction to give a better look, inside via
if( (aDrawMode & GR_XOR) == 0 )
GRSetDrawMode( aDC, GR_COPY );
EDA_RECT* clipbox = panel? panel->GetClipBox() : NULL;
DrawGraphicHaloText( clipbox, aDC, m_Start,
color, WHITE, BLACK, net->GetShortNetname(), 0,
wxSize( tsize, tsize ),
GR_TEXT_HJUSTIFY_CENTER, GR_TEXT_VJUSTIFY_CENTER,
tsize / 7, false, false );
}
}
}
void TRACK::Draw( EDA_DRAW_PANEL* panel, wxDC* aDC, GR_DRAWMODE aDrawMode,
const wxPoint& aOffset )
{
BOARD * brd = GetBoard( );
EDA_COLOR_T color = brd->GetLayerColor(m_Layer);
if( brd->IsLayerVisible( m_Layer ) == false && !( aDrawMode & GR_HIGHLIGHT ) )
return;
#ifdef USE_WX_OVERLAY
// If dragged not draw in OnPaint otherwise remains impressed in wxOverlay
if( (m_Flags & IS_DRAGGED) && aDC->IsKindOf(wxCLASSINFO(wxPaintDC)))
return;
#endif
if( ( aDrawMode & GR_ALLOW_HIGHCONTRAST ) && DisplayOpt.ContrastModeDisplay )
{
LAYER_NUM curr_layer = ( (PCB_SCREEN*) panel->GetScreen() )->m_Active_Layer;
if( !IsOnLayer( curr_layer ) )
ColorTurnToDarkDarkGray( &color );
}
if( aDrawMode & GR_HIGHLIGHT )
ColorChangeHighlightFlag( &color, !(aDrawMode & GR_AND) );
ColorApplyHighlightFlag( &color );
SetAlpha( &color, 150 );
GRSetDrawMode( aDC, aDrawMode );
int l_trace = m_Width / 2;
if( aDC->LogicalToDeviceXRel( l_trace ) <= MIN_DRAW_WIDTH )
{
GRLine( panel->GetClipBox(), aDC, m_Start + aOffset, m_End + aOffset, 0, color );
return;
}
if( !DisplayOpt.DisplayPcbTrackFill || GetState( FORCE_SKETCH ) )
{
GRCSegm( panel->GetClipBox(), aDC, m_Start + aOffset, m_End + aOffset, m_Width, color );
}
else
{
GRFillCSegm( panel->GetClipBox(), aDC, m_Start.x + aOffset.x,
m_Start.y + aOffset.y,
m_End.x + aOffset.x, m_End.y + aOffset.y, m_Width, color );
}
if( panel->GetScreen()->m_IsPrinting )
return;
// Show clearance for tracks, not for zone segments
if( ShowClearance( this ) )
{
GRCSegm( panel->GetClipBox(), aDC, m_Start + aOffset, m_End + aOffset,
m_Width + (GetClearance() * 2), color );
}
DrawShortNetname( panel, aDC, aDrawMode, color );
}
void D_PAD::Draw( EDA_DRAW_PANEL* aPanel, wxDC* aDC, GR_DRAWMODE aDraw_mode,
const wxPoint& aOffset )
{
wxSize mask_margin; // margin (clearance) used for some non copper layers
#ifdef SHOW_PADMASK_REAL_SIZE_AND_COLOR
int showActualMaskSize = 0; /* Layer number if the actual pad size on mask layer can
* be displayed i.e. if only one layer is shown for this pad
* and this layer is a mask (solder mask or solder paste
*/
#endif
if( m_Flags & DO_NOT_DRAW )
return;
PAD_DRAWINFO drawInfo;
drawInfo.m_Offset = aOffset;
/* We can show/hide pads from the layer manager.
* options are show/hide pads on front and/or back side of the board
* For through pads, we hide them only if both sides are hidden.
* smd pads on back are hidden for all layers (copper and technical layers)
* on back side of the board
* smd pads on front are hidden for all layers (copper and technical layers)
* on front side of the board
* ECO, edge and Draw layers and not considered
*/
BOARD* brd = GetBoard();
bool frontVisible = brd->IsElementVisible( PCB_VISIBLE( PAD_FR_VISIBLE ) );
bool backVisible = brd->IsElementVisible( PCB_VISIBLE( PAD_BK_VISIBLE ) );
if( !frontVisible && !backVisible )
return;
// If pad is only on front side (no layer on back side)
// and if hide front side pads is enabled, do not draw
if( !frontVisible && !( m_layerMask & LSET::BackMask() ).any() )
return;
// If pad is only on back side (no layer on front side)
// and if hide back side pads is enabled, do not draw
if( !backVisible && !( m_layerMask & LSET::FrontMask() ).any() )
return;
PCB_BASE_FRAME* frame = (PCB_BASE_FRAME*) aPanel->GetParent();
wxCHECK_RET( frame != NULL, wxT( "Panel has no parent frame window." ) );
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)frame->GetDisplayOptions();
PCB_SCREEN* screen = frame->GetScreen();
if( displ_opts && displ_opts->m_DisplayPadFill == SKETCH )
drawInfo.m_ShowPadFilled = false;
else
drawInfo.m_ShowPadFilled = true;
EDA_COLOR_T color = BLACK;
if( m_layerMask[F_Cu] )
{
color = brd->GetVisibleElementColor( PAD_FR_VISIBLE );
}
if( m_layerMask[B_Cu] )
{
color = ColorMix( color, brd->GetVisibleElementColor( PAD_BK_VISIBLE ) );
}
if( color == BLACK ) // Not on a visible copper layer (i.e. still nothing to show)
{
// If the pad is on only one tech layer, use the layer color else use DARKGRAY
LSET mask_non_copper_layers = m_layerMask & ~LSET::AllCuMask();
#ifdef SHOW_PADMASK_REAL_SIZE_AND_COLOR
mask_non_copper_layers &= brd->GetVisibleLayers();
#endif
LAYER_ID pad_layer = mask_non_copper_layers.ExtractLayer();
switch( (int) pad_layer )
{
case UNDEFINED_LAYER: // More than one layer
color = DARKGRAY;
break;
case UNSELECTED_LAYER: // Shouldn't really happen...
break;
default:
color = brd->GetLayerColor( pad_layer );
#ifdef SHOW_PADMASK_REAL_SIZE_AND_COLOR
showActualMaskSize = pad_layer;
#endif
}
}
// if SMD or connector pad and high contrast mode
if( ( aDraw_mode & GR_ALLOW_HIGHCONTRAST ) &&
( GetAttribute() == PAD_SMD || GetAttribute() == PAD_CONN ) &&
displ_opts && displ_opts->m_ContrastModeDisplay )
{
// when routing tracks
if( frame->GetToolId() == ID_TRACK_BUTT )
{
LAYER_ID routeTop = screen->m_Route_Layer_TOP;
LAYER_ID routeBot = screen->m_Route_Layer_BOTTOM;
// if routing between copper and component layers,
// or the current layer is one of said 2 external copper layers,
// then highlight only the current layer.
if( ( screen->m_Active_Layer == F_Cu || screen->m_Active_Layer == B_Cu ) ||
( routeTop==F_Cu && routeBot==B_Cu ) ||
( routeTop==B_Cu && routeBot==F_Cu )
)
{
if( !IsOnLayer( screen->m_Active_Layer ) )
ColorTurnToDarkDarkGray( &color );
}
// else routing between an internal signal layer and some other
// layer. Grey out all PAD_SMD pads not on current or the single
// selected external layer.
else if( !IsOnLayer( screen->m_Active_Layer )
&& !IsOnLayer( routeTop )
&& !IsOnLayer( routeBot ) )
{
ColorTurnToDarkDarkGray( &color );
}
}
// when not edting tracks, show PAD_SMD components not on active layer
// as greyed out
else
{
if( !IsOnLayer( screen->m_Active_Layer ) )
ColorTurnToDarkDarkGray( &color );
}
}
#ifdef SHOW_PADMASK_REAL_SIZE_AND_COLOR
if( showActualMaskSize )
{
switch( showActualMaskSize )
{
case B_Mask:
case F_Mask:
mask_margin.x = mask_margin.y = GetSolderMaskMargin();
break;
case B_Paste:
case F_Paste:
mask_margin = GetSolderPasteMargin();
break;
default:
// Another layer which has no margin to handle
break;
}
}
#endif
// if Contrast mode is ON and a technical layer active, show pads on this
// layer so we can see pads on paste or solder layer and the size of the
// mask
if( ( aDraw_mode & GR_ALLOW_HIGHCONTRAST ) &&
displ_opts && displ_opts->m_ContrastModeDisplay && !IsCopperLayer( screen->m_Active_Layer ) )
{
if( IsOnLayer( screen->m_Active_Layer ) )
{
color = brd->GetLayerColor( screen->m_Active_Layer );
// In high contrast mode, and if the active layer is the mask
// layer shows the pad size with the mask clearance
switch( screen->m_Active_Layer )
{
case B_Mask:
case F_Mask:
mask_margin.x = mask_margin.y = GetSolderMaskMargin();
break;
case B_Paste:
case F_Paste:
mask_margin = GetSolderPasteMargin();
break;
default:
break;
}
}
else
color = DARKDARKGRAY;
}
if( aDraw_mode & GR_HIGHLIGHT )
ColorChangeHighlightFlag( &color, !(aDraw_mode & GR_AND) );
ColorApplyHighlightFlag( &color );
bool DisplayIsol = displ_opts && displ_opts->m_DisplayPadIsol;
if( !( m_layerMask & LSET::AllCuMask() ).any() )
DisplayIsol = false;
if( ( GetAttribute() == PAD_HOLE_NOT_PLATED ) &&
brd->IsElementVisible( NON_PLATED_VISIBLE ) )
{
drawInfo.m_ShowNotPlatedHole = true;
drawInfo.m_NPHoleColor = brd->GetVisibleElementColor( NON_PLATED_VISIBLE );
}
drawInfo.m_DrawMode = aDraw_mode;
drawInfo.m_Color = color;
drawInfo.m_DrawPanel = aPanel;
drawInfo.m_Mask_margin = mask_margin;
drawInfo.m_ShowNCMark = brd->IsElementVisible( PCB_VISIBLE( NO_CONNECTS_VISIBLE ) );
drawInfo.m_IsPrinting = screen->m_IsPrinting;
SetAlpha( &color, 170 );
/* Get the pad clearance. This has a meaning only for Pcbnew.
* for CvPcb GetClearance() creates debug errors because
* there is no net classes so a call to GetClearance() is made only when
* needed (never needed in CvPcb)
*/
drawInfo.m_PadClearance = DisplayIsol ? GetClearance() : 0;
// Draw the pad number
if( displ_opts && !displ_opts->m_DisplayPadNum )
drawInfo.m_Display_padnum = false;
if( displ_opts &&
(( displ_opts ->m_DisplayNetNamesMode == 0 ) || ( displ_opts->m_DisplayNetNamesMode == 2 )) )
drawInfo.m_Display_netname = false;
// Display net names is restricted to pads that are on the active layer
// in high contrast mode display
if( ( aDraw_mode & GR_ALLOW_HIGHCONTRAST ) &&
!IsOnLayer( screen->m_Active_Layer ) && displ_opts && displ_opts->m_ContrastModeDisplay )
drawInfo.m_Display_netname = false;
DrawShape( aPanel->GetClipBox(), aDC, drawInfo );
}
void DRAWSEGMENT::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE draw_mode,
const wxPoint& aOffset )
{
int ux0, uy0, dx, dy;
int l_trace;
int mode;
int radius;
LAYER_NUM curr_layer = ( (PCB_SCREEN*) panel->GetScreen() )->m_Active_Layer;
EDA_COLOR_T color;
BOARD * brd = GetBoard( );
if( brd->IsLayerVisible( GetLayer() ) == false )
return;
color = brd->GetLayerColor( GetLayer() );
if( ( draw_mode & GR_ALLOW_HIGHCONTRAST ) && DisplayOpt.ContrastModeDisplay )
{
if( !IsOnLayer( curr_layer ) && !IsOnLayer( EDGE_N ) )
ColorTurnToDarkDarkGray( &color );
}
GRSetDrawMode( DC, draw_mode );
l_trace = m_Width >> 1; /* half trace width */
// Line start point or Circle and Arc center
ux0 = m_Start.x + aOffset.x;
uy0 = m_Start.y + aOffset.y;
// Line end point or circle and arc start point
dx = m_End.x + aOffset.x;
dy = m_End.y + aOffset.y;
mode = DisplayOpt.DisplayDrawItems;
if( m_Flags & FORCE_SKETCH )
mode = SKETCH;
if( DC->LogicalToDeviceXRel( l_trace ) <= MIN_DRAW_WIDTH )
mode = LINE;
switch( m_Shape )
{
case S_CIRCLE:
radius = KiROUND( Distance( ux0, uy0, dx, dy ) );
if( mode == LINE )
{
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius, color );
}
else if( mode == SKETCH )
{
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius - l_trace, color );
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius + l_trace, color );
}
else
{
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius, m_Width, color );
}
break;
case S_ARC:
double StAngle, EndAngle;
radius = KiROUND( Distance( ux0, uy0, dx, dy ) );
StAngle = ArcTangente( dy - uy0, dx - ux0 );
EndAngle = StAngle + m_Angle;
if( !panel->GetPrintMirrored() )
{
if( StAngle > EndAngle )
EXCHG( StAngle, EndAngle );
}
else // Mirrored mode: arc orientation is reversed
{
if( StAngle < EndAngle )
EXCHG( StAngle, EndAngle );
}
if( mode == LINE )
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle, radius, color );
else if( mode == SKETCH )
{
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle,
radius - l_trace, color );
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle,
radius + l_trace, color );
}
else
{
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle,
radius, m_Width, color );
}
break;
case S_CURVE:
m_BezierPoints = Bezier2Poly(m_Start, m_BezierC1, m_BezierC2, m_End);
for (unsigned int i=1; i < m_BezierPoints.size(); i++) {
if( mode == LINE )
GRLine( panel->GetClipBox(), DC,
m_BezierPoints[i].x, m_BezierPoints[i].y,
m_BezierPoints[i-1].x, m_BezierPoints[i-1].y, 0,
color );
else if( mode == SKETCH )
{
GRCSegm( panel->GetClipBox(), DC,
m_BezierPoints[i].x, m_BezierPoints[i].y,
m_BezierPoints[i-1].x, m_BezierPoints[i-1].y,
m_Width, color );
}
else
{
GRFillCSegm( panel->GetClipBox(), DC,
m_BezierPoints[i].x, m_BezierPoints[i].y,
m_BezierPoints[i-1].x, m_BezierPoints[i-1].y,
m_Width, color );
}
}
break;
default:
if( mode == LINE )
{
GRLine( panel->GetClipBox(), DC, ux0, uy0, dx, dy, 0, color );
}
else if( mode == SKETCH )
{
GRCSegm( panel->GetClipBox(), DC, ux0, uy0, dx, dy, m_Width, color );
}
else
{
GRFillCSegm( panel->GetClipBox(), DC, ux0, uy0, dx, dy, m_Width, color );
}
break;
}
}
void ZONE_CONTAINER::DrawFilledArea( EDA_DRAW_PANEL* panel,
wxDC* DC, GR_DRAWMODE aDrawMode, const wxPoint& offset )
{
static std::vector <char> CornersTypeBuffer;
static std::vector <wxPoint> CornersBuffer;
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)panel->GetDisplayOptions();
// outline_mode is false to show filled polys,
// and true to show polygons outlines only (test and debug purposes)
bool outline_mode = displ_opts->m_DisplayZonesMode == 2 ? true : false;
if( DC == NULL )
return;
if( displ_opts->m_DisplayZonesMode == 1 ) // Do not show filled areas
return;
if( m_FilledPolysList.IsEmpty() ) // Nothing to draw
return;
BOARD* brd = GetBoard();
LAYER_ID curr_layer = ( (PCB_SCREEN*) panel->GetScreen() )->m_Active_Layer;
EDA_COLOR_T color = brd->GetLayerColor( m_Layer );
if( brd->IsLayerVisible( m_Layer ) == false && ( color & HIGHLIGHT_FLAG ) != HIGHLIGHT_FLAG )
return;
GRSetDrawMode( DC, aDrawMode );
if( displ_opts->m_ContrastModeDisplay )
{
if( !IsOnLayer( curr_layer ) )
ColorTurnToDarkDarkGray( &color );
}
if( aDrawMode & GR_HIGHLIGHT )
ColorChangeHighlightFlag( &color, !(aDrawMode & GR_AND) );
ColorApplyHighlightFlag( &color );
SetAlpha( &color, 150 );
for ( int ic = 0; ic < m_FilledPolysList.OutlineCount(); ic++ )
{
const SHAPE_LINE_CHAIN& path = m_FilledPolysList.COutline( ic );
CornersBuffer.clear();
wxPoint p0;
for( int j = 0; j < path.PointCount(); j++ )
{
const VECTOR2I& corner = path.CPoint( j );
wxPoint coord( corner.x + offset.x, corner.y + offset.y );
if( j == 0 )
p0 = coord;
CornersBuffer.push_back( coord );
}
CornersBuffer.push_back( p0 );
// Draw outlines:
if( ( m_ZoneMinThickness > 1 ) || outline_mode )
{
int ilim = CornersBuffer.size() - 1;
for( int is = 0, ie = ilim; is <= ilim; ie = is, is++ )
{
int x0 = CornersBuffer[is].x;
int y0 = CornersBuffer[is].y;
int x1 = CornersBuffer[ie].x;
int y1 = CornersBuffer[ie].y;
// Draw only basic outlines, not extra segments.
if( !displ_opts->m_DisplayPcbTrackFill || GetState( FORCE_SKETCH ) )
GRCSegm( panel->GetClipBox(), DC,
x0, y0, x1, y1,
m_ZoneMinThickness, color );
else
GRFillCSegm( panel->GetClipBox(), DC,
x0, y0, x1, y1,
m_ZoneMinThickness, color );
}
}
// Draw areas:
if( m_FillMode == 0 && !outline_mode )
GRPoly( panel->GetClipBox(), DC, CornersBuffer.size(), &CornersBuffer[0],
true, 0, color, color );
}
if( m_FillMode == 1 && !outline_mode ) // filled with segments
{
for( unsigned ic = 0; ic < m_FillSegmList.size(); ic++ )
{
wxPoint start = m_FillSegmList[ic].m_Start + offset;
wxPoint end = m_FillSegmList[ic].m_End + offset;
if( !displ_opts->m_DisplayPcbTrackFill || GetState( FORCE_SKETCH ) )
GRCSegm( panel->GetClipBox(), DC, start.x, start.y, end.x, end.y,
m_ZoneMinThickness, color );
else
GRFillCSegm( panel->GetClipBox(), DC, start.x, start.y, end.x, end.y,
m_ZoneMinThickness, color );
}
}
}