/**
* Global SSL init
*
* @retval 0 error initializing SSL
* @retval 1 SSL initialized successfully
*/
int Curl_ssl_init(void)
{
/* make sure this is only done once */
if(init_ssl)
return 1;
init_ssl = TRUE; /* never again */
#ifdef USE_SSLEAY
return Curl_ossl_init();
#else
#ifdef USE_GNUTLS
return Curl_gtls_init();
#else
/* no SSL support */
return 1;
#endif /* USE_GNUTLS */
#endif /* USE_SSLEAY */
}
static CURLcode
gtls_connect_step1(struct connectdata *conn,
int sockindex)
{
#ifndef USE_GNUTLS_PRIORITY_SET_DIRECT
static const int cert_type_priority[] = { GNUTLS_CRT_X509, 0 };
#endif
struct SessionHandle *data = conn->data;
gnutls_session session;
int rc;
void *ssl_sessionid;
size_t ssl_idsize;
bool sni = TRUE; /* default is SNI enabled */
#ifdef ENABLE_IPV6
struct in6_addr addr;
#else
struct in_addr addr;
#endif
if(conn->ssl[sockindex].state == ssl_connection_complete)
/* to make us tolerant against being called more than once for the
same connection */
return CURLE_OK;
if(!gtls_inited)
Curl_gtls_init();
/* GnuTLS only supports SSLv3 and TLSv1 */
if(data->set.ssl.version == CURL_SSLVERSION_SSLv2) {
failf(data, "GnuTLS does not support SSLv2");
return CURLE_SSL_CONNECT_ERROR;
}
else if(data->set.ssl.version == CURL_SSLVERSION_SSLv3)
sni = FALSE; /* SSLv3 has no SNI */
/* allocate a cred struct */
rc = gnutls_certificate_allocate_credentials(&conn->ssl[sockindex].cred);
if(rc != GNUTLS_E_SUCCESS) {
failf(data, "gnutls_cert_all_cred() failed: %s", gnutls_strerror(rc));
return CURLE_SSL_CONNECT_ERROR;
}
#ifdef USE_TLS_SRP
if(data->set.ssl.authtype == CURL_TLSAUTH_SRP) {
infof(data, "Using TLS-SRP username: %s\n", data->set.ssl.username);
rc = gnutls_srp_allocate_client_credentials(
&conn->ssl[sockindex].srp_client_cred);
if(rc != GNUTLS_E_SUCCESS) {
failf(data, "gnutls_srp_allocate_client_cred() failed: %s",
gnutls_strerror(rc));
return CURLE_OUT_OF_MEMORY;
}
rc = gnutls_srp_set_client_credentials(conn->ssl[sockindex].
srp_client_cred,
data->set.ssl.username,
data->set.ssl.password);
if(rc != GNUTLS_E_SUCCESS) {
failf(data, "gnutls_srp_set_client_cred() failed: %s",
gnutls_strerror(rc));
return CURLE_BAD_FUNCTION_ARGUMENT;
}
}
#endif
if(data->set.ssl.CAfile) {
/* set the trusted CA cert bundle file */
gnutls_certificate_set_verify_flags(conn->ssl[sockindex].cred,
GNUTLS_VERIFY_ALLOW_X509_V1_CA_CRT);
rc = gnutls_certificate_set_x509_trust_file(conn->ssl[sockindex].cred,
data->set.ssl.CAfile,
GNUTLS_X509_FMT_PEM);
if(rc < 0) {
infof(data, "error reading ca cert file %s (%s)\n",
data->set.ssl.CAfile, gnutls_strerror(rc));
if(data->set.ssl.verifypeer)
return CURLE_SSL_CACERT_BADFILE;
}
else
infof(data, "found %d certificates in %s\n",
rc, data->set.ssl.CAfile);
}
if(data->set.ssl.CRLfile) {
/* set the CRL list file */
rc = gnutls_certificate_set_x509_crl_file(conn->ssl[sockindex].cred,
data->set.ssl.CRLfile,
GNUTLS_X509_FMT_PEM);
if(rc < 0) {
failf(data, "error reading crl file %s (%s)",
data->set.ssl.CRLfile, gnutls_strerror(rc));
return CURLE_SSL_CRL_BADFILE;
}
else
infof(data, "found %d CRL in %s\n",
rc, data->set.ssl.CRLfile);
}
/* Initialize TLS session as a client */
rc = gnutls_init(&conn->ssl[sockindex].session, GNUTLS_CLIENT);
if(rc != GNUTLS_E_SUCCESS) {
failf(data, "gnutls_init() failed: %d", rc);
return CURLE_SSL_CONNECT_ERROR;
}
/* convenient assign */
session = conn->ssl[sockindex].session;
if((0 == Curl_inet_pton(AF_INET, conn->host.name, &addr)) &&
#ifdef ENABLE_IPV6
(0 == Curl_inet_pton(AF_INET6, conn->host.name, &addr)) &&
#endif
sni &&
(gnutls_server_name_set(session, GNUTLS_NAME_DNS, conn->host.name,
strlen(conn->host.name)) < 0))
infof(data, "WARNING: failed to configure server name indication (SNI) "
"TLS extension\n");
/* Use default priorities */
rc = gnutls_set_default_priority(session);
if(rc != GNUTLS_E_SUCCESS)
return CURLE_SSL_CONNECT_ERROR;
if(data->set.ssl.version == CURL_SSLVERSION_SSLv3) {
#ifndef USE_GNUTLS_PRIORITY_SET_DIRECT
static const int protocol_priority[] = { GNUTLS_SSL3, 0 };
rc = gnutls_protocol_set_priority(session, protocol_priority);
#else
const char *err;
/* the combination of the cipher ARCFOUR with SSL 3.0 and TLS 1.0 is not
vulnerable to attacks such as the BEAST, why this code now explicitly
asks for that
*/
rc = gnutls_priority_set_direct(session,
"NORMAL:-VERS-TLS-ALL:+VERS-SSL3.0:"
"-CIPHER-ALL:+ARCFOUR-128",
&err);
#endif
if(rc != GNUTLS_E_SUCCESS)
return CURLE_SSL_CONNECT_ERROR;
}
#ifndef USE_GNUTLS_PRIORITY_SET_DIRECT
/* Sets the priority on the certificate types supported by gnutls. Priority
is higher for types specified before others. After specifying the types
you want, you must append a 0. */
rc = gnutls_certificate_type_set_priority(session, cert_type_priority);
if(rc != GNUTLS_E_SUCCESS)
return CURLE_SSL_CONNECT_ERROR;
#endif
if(data->set.str[STRING_CERT]) {
if(gnutls_certificate_set_x509_key_file(
conn->ssl[sockindex].cred,
data->set.str[STRING_CERT],
data->set.str[STRING_KEY] ?
data->set.str[STRING_KEY] : data->set.str[STRING_CERT],
do_file_type(data->set.str[STRING_CERT_TYPE]) ) !=
GNUTLS_E_SUCCESS) {
failf(data, "error reading X.509 key or certificate file");
return CURLE_SSL_CONNECT_ERROR;
}
}
#ifdef USE_TLS_SRP
/* put the credentials to the current session */
if(data->set.ssl.authtype == CURL_TLSAUTH_SRP) {
rc = gnutls_credentials_set(session, GNUTLS_CRD_SRP,
conn->ssl[sockindex].srp_client_cred);
if(rc != GNUTLS_E_SUCCESS)
failf(data, "gnutls_credentials_set() failed: %s", gnutls_strerror(rc));
}
else
#endif
rc = gnutls_credentials_set(session, GNUTLS_CRD_CERTIFICATE,
conn->ssl[sockindex].cred);
/* set the connection handle (file descriptor for the socket) */
gnutls_transport_set_ptr(session,
GNUTLS_INT_TO_POINTER_CAST(conn->sock[sockindex]));
/* register callback functions to send and receive data. */
gnutls_transport_set_push_function(session, Curl_gtls_push);
gnutls_transport_set_pull_function(session, Curl_gtls_pull);
/* lowat must be set to zero when using custom push and pull functions. */
gnutls_transport_set_lowat(session, 0);
/* This might be a reconnect, so we check for a session ID in the cache
to speed up things */
if(!Curl_ssl_getsessionid(conn, &ssl_sessionid, &ssl_idsize)) {
/* we got a session id, use it! */
gnutls_session_set_data(session, ssl_sessionid, ssl_idsize);
/* Informational message */
infof (data, "SSL re-using session ID\n");
}
return CURLE_OK;
}
static CURLcode
gtls_connect_step1(struct connectdata *conn,
int sockindex)
{
struct SessionHandle *data = conn->data;
gnutls_session_t session;
int rc;
void *ssl_sessionid;
size_t ssl_idsize;
bool sni = TRUE; /* default is SNI enabled */
#ifdef ENABLE_IPV6
struct in6_addr addr;
#else
struct in_addr addr;
#endif
#ifndef USE_GNUTLS_PRIORITY_SET_DIRECT
static const int cipher_priority[] = {
/* These two ciphers were added to GnuTLS as late as ver. 3.0.1,
but this code path is only ever used for ver. < 2.12.0.
GNUTLS_CIPHER_AES_128_GCM,
GNUTLS_CIPHER_AES_256_GCM,
*/
GNUTLS_CIPHER_AES_128_CBC,
GNUTLS_CIPHER_AES_256_CBC,
GNUTLS_CIPHER_CAMELLIA_128_CBC,
GNUTLS_CIPHER_CAMELLIA_256_CBC,
GNUTLS_CIPHER_3DES_CBC,
};
static const int cert_type_priority[] = { GNUTLS_CRT_X509, 0 };
static int protocol_priority[] = { 0, 0, 0, 0 };
#else
#define GNUTLS_CIPHERS "NORMAL:-ARCFOUR-128:-CTYPE-ALL:+CTYPE-X509"
/* If GnuTLS was compiled without support for SRP it will error out if SRP is
requested in the priority string, so treat it specially
*/
#define GNUTLS_SRP "+SRP"
const char* prioritylist;
const char *err = NULL;
#endif
if(conn->ssl[sockindex].state == ssl_connection_complete)
/* to make us tolerant against being called more than once for the
same connection */
return CURLE_OK;
if(!gtls_inited)
Curl_gtls_init();
/* GnuTLS only supports SSLv3 and TLSv1 */
if(data->set.ssl.version == CURL_SSLVERSION_SSLv2) {
failf(data, "GnuTLS does not support SSLv2");
return CURLE_SSL_CONNECT_ERROR;
}
else if(data->set.ssl.version == CURL_SSLVERSION_SSLv3)
sni = FALSE; /* SSLv3 has no SNI */
/* allocate a cred struct */
rc = gnutls_certificate_allocate_credentials(&conn->ssl[sockindex].cred);
if(rc != GNUTLS_E_SUCCESS) {
failf(data, "gnutls_cert_all_cred() failed: %s", gnutls_strerror(rc));
return CURLE_SSL_CONNECT_ERROR;
}
#ifdef USE_TLS_SRP
if(data->set.ssl.authtype == CURL_TLSAUTH_SRP) {
infof(data, "Using TLS-SRP username: %s\n", data->set.ssl.username);
rc = gnutls_srp_allocate_client_credentials(
&conn->ssl[sockindex].srp_client_cred);
if(rc != GNUTLS_E_SUCCESS) {
failf(data, "gnutls_srp_allocate_client_cred() failed: %s",
gnutls_strerror(rc));
return CURLE_OUT_OF_MEMORY;
}
rc = gnutls_srp_set_client_credentials(conn->ssl[sockindex].
srp_client_cred,
data->set.ssl.username,
data->set.ssl.password);
if(rc != GNUTLS_E_SUCCESS) {
failf(data, "gnutls_srp_set_client_cred() failed: %s",
gnutls_strerror(rc));
return CURLE_BAD_FUNCTION_ARGUMENT;
}
}
#endif
if(data->set.ssl.CAfile) {
/* set the trusted CA cert bundle file */
gnutls_certificate_set_verify_flags(conn->ssl[sockindex].cred,
GNUTLS_VERIFY_ALLOW_X509_V1_CA_CRT);
rc = gnutls_certificate_set_x509_trust_file(conn->ssl[sockindex].cred,
data->set.ssl.CAfile,
GNUTLS_X509_FMT_PEM);
if(rc < 0) {
infof(data, "error reading ca cert file %s (%s)\n",
data->set.ssl.CAfile, gnutls_strerror(rc));
if(data->set.ssl.verifypeer)
return CURLE_SSL_CACERT_BADFILE;
}
else
infof(data, "found %d certificates in %s\n",
rc, data->set.ssl.CAfile);
}
#ifdef HAS_CAPATH
if(data->set.ssl.CApath) {
/* set the trusted CA cert directory */
rc = gnutls_certificate_set_x509_trust_dir(conn->ssl[sockindex].cred,
data->set.ssl.CApath,
GNUTLS_X509_FMT_PEM);
if(rc < 0) {
infof(data, "error reading ca cert file %s (%s)\n",
data->set.ssl.CAfile, gnutls_strerror(rc));
if(data->set.ssl.verifypeer)
return CURLE_SSL_CACERT_BADFILE;
}
else
infof(data, "found %d certificates in %s\n",
rc, data->set.ssl.CApath);
}
#endif
#ifdef CURL_CA_FALLBACK
/* use system ca certificate store as fallback */
if(data->set.ssl.verifypeer &&
!(data->set.ssl.CAfile || data->set.ssl.CApath)) {
gnutls_certificate_set_x509_system_trust(conn->ssl[sockindex].cred);
}
#endif
if(data->set.ssl.CRLfile) {
/* set the CRL list file */
rc = gnutls_certificate_set_x509_crl_file(conn->ssl[sockindex].cred,
data->set.ssl.CRLfile,
GNUTLS_X509_FMT_PEM);
if(rc < 0) {
failf(data, "error reading crl file %s (%s)",
data->set.ssl.CRLfile, gnutls_strerror(rc));
return CURLE_SSL_CRL_BADFILE;
}
else
infof(data, "found %d CRL in %s\n",
rc, data->set.ssl.CRLfile);
}
/* Initialize TLS session as a client */
rc = gnutls_init(&conn->ssl[sockindex].session, GNUTLS_CLIENT);
if(rc != GNUTLS_E_SUCCESS) {
failf(data, "gnutls_init() failed: %d", rc);
return CURLE_SSL_CONNECT_ERROR;
}
/* convenient assign */
session = conn->ssl[sockindex].session;
if((0 == Curl_inet_pton(AF_INET, conn->host.name, &addr)) &&
#ifdef ENABLE_IPV6
(0 == Curl_inet_pton(AF_INET6, conn->host.name, &addr)) &&
#endif
sni &&
(gnutls_server_name_set(session, GNUTLS_NAME_DNS, conn->host.name,
strlen(conn->host.name)) < 0))
infof(data, "WARNING: failed to configure server name indication (SNI) "
"TLS extension\n");
/* Use default priorities */
rc = gnutls_set_default_priority(session);
if(rc != GNUTLS_E_SUCCESS)
return CURLE_SSL_CONNECT_ERROR;
#ifndef USE_GNUTLS_PRIORITY_SET_DIRECT
rc = gnutls_cipher_set_priority(session, cipher_priority);
if(rc != GNUTLS_E_SUCCESS)
return CURLE_SSL_CONNECT_ERROR;
/* Sets the priority on the certificate types supported by gnutls. Priority
is higher for types specified before others. After specifying the types
you want, you must append a 0. */
rc = gnutls_certificate_type_set_priority(session, cert_type_priority);
if(rc != GNUTLS_E_SUCCESS)
return CURLE_SSL_CONNECT_ERROR;
if(data->set.ssl.cipher_list != NULL) {
failf(data, "can't pass a custom cipher list to older GnuTLS"
" versions");
return CURLE_SSL_CONNECT_ERROR;
}
switch (data->set.ssl.version) {
case CURL_SSLVERSION_SSLv3:
protocol_priority[0] = GNUTLS_SSL3;
break;
case CURL_SSLVERSION_DEFAULT:
case CURL_SSLVERSION_TLSv1:
protocol_priority[0] = GNUTLS_TLS1_0;
protocol_priority[1] = GNUTLS_TLS1_1;
protocol_priority[2] = GNUTLS_TLS1_2;
break;
case CURL_SSLVERSION_TLSv1_0:
protocol_priority[0] = GNUTLS_TLS1_0;
break;
case CURL_SSLVERSION_TLSv1_1:
protocol_priority[0] = GNUTLS_TLS1_1;
break;
case CURL_SSLVERSION_TLSv1_2:
protocol_priority[0] = GNUTLS_TLS1_2;
break;
case CURL_SSLVERSION_SSLv2:
default:
failf(data, "GnuTLS does not support SSLv2");
return CURLE_SSL_CONNECT_ERROR;
break;
}
rc = gnutls_protocol_set_priority(session, protocol_priority);
if(rc != GNUTLS_E_SUCCESS) {
failf(data, "Did you pass a valid GnuTLS cipher list?");
return CURLE_SSL_CONNECT_ERROR;
}
#else
/* Ensure +SRP comes at the *end* of all relevant strings so that it can be
* removed if a run-time error indicates that SRP is not supported by this
* GnuTLS version */
switch (data->set.ssl.version) {
case CURL_SSLVERSION_SSLv3:
prioritylist = GNUTLS_CIPHERS ":-VERS-TLS-ALL:+VERS-SSL3.0";
sni = false;
break;
case CURL_SSLVERSION_DEFAULT:
case CURL_SSLVERSION_TLSv1:
prioritylist = GNUTLS_CIPHERS ":-VERS-SSL3.0:" GNUTLS_SRP;
break;
case CURL_SSLVERSION_TLSv1_0:
prioritylist = GNUTLS_CIPHERS ":-VERS-SSL3.0:-VERS-TLS-ALL:"
"+VERS-TLS1.0:" GNUTLS_SRP;
break;
case CURL_SSLVERSION_TLSv1_1:
prioritylist = GNUTLS_CIPHERS ":-VERS-SSL3.0:-VERS-TLS-ALL:"
"+VERS-TLS1.1:" GNUTLS_SRP;
break;
case CURL_SSLVERSION_TLSv1_2:
prioritylist = GNUTLS_CIPHERS ":-VERS-SSL3.0:-VERS-TLS-ALL:"
"+VERS-TLS1.2:" GNUTLS_SRP;
break;
case CURL_SSLVERSION_SSLv2:
default:
failf(data, "GnuTLS does not support SSLv2");
return CURLE_SSL_CONNECT_ERROR;
break;
}
rc = gnutls_priority_set_direct(session, prioritylist, &err);
if((rc == GNUTLS_E_INVALID_REQUEST) && err) {
if(!strcmp(err, GNUTLS_SRP)) {
/* This GnuTLS was probably compiled without support for SRP.
* Note that fact and try again without it. */
int validprioritylen = curlx_uztosi(err - prioritylist);
char *prioritycopy = strdup(prioritylist);
if(!prioritycopy)
return CURLE_OUT_OF_MEMORY;
infof(data, "This GnuTLS does not support SRP\n");
if(validprioritylen)
/* Remove the :+SRP */
prioritycopy[validprioritylen - 1] = 0;
rc = gnutls_priority_set_direct(session, prioritycopy, &err);
free(prioritycopy);
}
}
if(rc != GNUTLS_E_SUCCESS) {
failf(data, "Error %d setting GnuTLS cipher list starting with %s",
rc, err);
return CURLE_SSL_CONNECT_ERROR;
}
#endif
#ifdef HAS_ALPN
if(data->set.ssl_enable_alpn) {
int cur = 0;
gnutls_datum_t protocols[2];
#ifdef USE_NGHTTP2
if(data->set.httpversion >= CURL_HTTP_VERSION_2) {
protocols[cur].data = (unsigned char *)NGHTTP2_PROTO_VERSION_ID;
protocols[cur].size = NGHTTP2_PROTO_VERSION_ID_LEN;
cur++;
infof(data, "ALPN, offering %s\n", NGHTTP2_PROTO_VERSION_ID);
}
#endif
protocols[cur].data = (unsigned char *)ALPN_HTTP_1_1;
protocols[cur].size = ALPN_HTTP_1_1_LENGTH;
cur++;
infof(data, "ALPN, offering %s\n", ALPN_HTTP_1_1);
gnutls_alpn_set_protocols(session, protocols, cur, 0);
}
#endif
if(data->set.str[STRING_CERT]) {
if(data->set.str[STRING_KEY_PASSWD]) {
#if HAVE_GNUTLS_CERTIFICATE_SET_X509_KEY_FILE2
const unsigned int supported_key_encryption_algorithms =
GNUTLS_PKCS_USE_PKCS12_3DES | GNUTLS_PKCS_USE_PKCS12_ARCFOUR |
GNUTLS_PKCS_USE_PKCS12_RC2_40 | GNUTLS_PKCS_USE_PBES2_3DES |
GNUTLS_PKCS_USE_PBES2_AES_128 | GNUTLS_PKCS_USE_PBES2_AES_192 |
GNUTLS_PKCS_USE_PBES2_AES_256;
rc = gnutls_certificate_set_x509_key_file2(
conn->ssl[sockindex].cred,
data->set.str[STRING_CERT],
data->set.str[STRING_KEY] ?
data->set.str[STRING_KEY] : data->set.str[STRING_CERT],
do_file_type(data->set.str[STRING_CERT_TYPE]),
data->set.str[STRING_KEY_PASSWD],
supported_key_encryption_algorithms);
if(rc != GNUTLS_E_SUCCESS) {
failf(data,
"error reading X.509 potentially-encrypted key file: %s",
gnutls_strerror(rc));
return CURLE_SSL_CONNECT_ERROR;
}
#else
failf(data, "gnutls lacks support for encrypted key files");
return CURLE_SSL_CONNECT_ERROR;
#endif
}
else {
rc = gnutls_certificate_set_x509_key_file(
conn->ssl[sockindex].cred,
data->set.str[STRING_CERT],
data->set.str[STRING_KEY] ?
data->set.str[STRING_KEY] : data->set.str[STRING_CERT],
do_file_type(data->set.str[STRING_CERT_TYPE]) );
if(rc != GNUTLS_E_SUCCESS) {
failf(data, "error reading X.509 key or certificate file: %s",
gnutls_strerror(rc));
return CURLE_SSL_CONNECT_ERROR;
}
}
}
#ifdef USE_TLS_SRP
/* put the credentials to the current session */
if(data->set.ssl.authtype == CURL_TLSAUTH_SRP) {
rc = gnutls_credentials_set(session, GNUTLS_CRD_SRP,
conn->ssl[sockindex].srp_client_cred);
if(rc != GNUTLS_E_SUCCESS) {
failf(data, "gnutls_credentials_set() failed: %s", gnutls_strerror(rc));
return CURLE_SSL_CONNECT_ERROR;
}
}
else
#endif
{
rc = gnutls_credentials_set(session, GNUTLS_CRD_CERTIFICATE,
conn->ssl[sockindex].cred);
if(rc != GNUTLS_E_SUCCESS) {
failf(data, "gnutls_credentials_set() failed: %s", gnutls_strerror(rc));
return CURLE_SSL_CONNECT_ERROR;
}
}
/* set the connection handle (file descriptor for the socket) */
gnutls_transport_set_ptr(session,
GNUTLS_INT_TO_POINTER_CAST(conn->sock[sockindex]));
/* register callback functions to send and receive data. */
gnutls_transport_set_push_function(session, Curl_gtls_push);
gnutls_transport_set_pull_function(session, Curl_gtls_pull);
/* lowat must be set to zero when using custom push and pull functions. */
gnutls_transport_set_lowat(session, 0);
#ifdef HAS_OCSP
if(data->set.ssl.verifystatus) {
rc = gnutls_ocsp_status_request_enable_client(session, NULL, 0, NULL);
if(rc != GNUTLS_E_SUCCESS) {
failf(data, "gnutls_ocsp_status_request_enable_client() failed: %d", rc);
return CURLE_SSL_CONNECT_ERROR;
}
}
#endif
/* This might be a reconnect, so we check for a session ID in the cache
to speed up things */
if(!Curl_ssl_getsessionid(conn, &ssl_sessionid, &ssl_idsize)) {
/* we got a session id, use it! */
gnutls_session_set_data(session, ssl_sessionid, ssl_idsize);
/* Informational message */
infof (data, "SSL re-using session ID\n");
}
return CURLE_OK;
}
