/** \fn void piezo_init()
* \brief Initialize pin as analog output. Initialize DAC. Count sine discrete aproximation.
* */
void piezo_init()
{
uint32_t i;
DAC_InitTypeDef DAC_InitStruct;
// initialize PA5 jako analogovy vystup
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Pin = 1<<5;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AN;
GPIO_InitStructure.GPIO_OType = GPIO_OType_PP;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_40MHz;
GPIO_Init(GPIOA, &GPIO_InitStructure);
// enable clock for DA converter
RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE);
// initialize DAC2
DAC_StructInit(&DAC_InitStruct);
DAC_Init(DAC_Channel_2,&DAC_InitStruct);
DAC_Cmd(DAC_Channel_2, ENABLE);
// count sine samples
for(i=0; i<SINE_SAMPLES_COUNT; i++)
{
sine_samples[i] = ((sin(((2*M_PI*(double)i)/SINE_SAMPLES_COUNT) -M_PI/2)+1)*(double)0xFFF)/2;
}
}
void analogout_init(dac_t *obj, PinName pin) {
DAC_TypeDef *dac;
DAC_InitTypeDef DAC_InitStructure;
// Get the peripheral name (DAC_1, ...) from the pin and assign it to the object
obj->dac = (DACName)pinmap_peripheral(pin, PinMap_DAC);
if (obj->dac == (DACName)NC) {
error("DAC pin mapping failed");
}
dac = (DAC_TypeDef *)(obj->dac);
// Configure GPIO
pinmap_pinout(pin, PinMap_DAC);
// Save the channel for future use
obj->pin = pin;
// Enable DAC clock
RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE);
// Configure and enable DAC channel
DAC_StructInit(&DAC_InitStructure);
DAC_Init(dac, DAC_Channel_1, &DAC_InitStructure);
DAC_Cmd(dac, DAC_Channel_1, ENABLE);
analogout_write_u16(obj, 0);
}
/**
* Configure DAC output
*/
void dacSetup(){
DAC_InitTypeDef DAC_InitStructure;
/* Enable GPIOA clock */
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);
/* Configure PA.04 (DAC_OUT1) in analog mode */
configureAnalogOutput(GPIOA, GPIO_Pin_4);
/* Configure PA.05 (DAC_OUT2) in analog mode */
/* configureAnalogOutput(GPIOA, GPIO_Pin_5); */
/* Enable DAC clock */
RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE);
/* DAC channel Configuration */
DAC_StructInit(&DAC_InitStructure);
DAC_InitStructure.DAC_Trigger = DAC_Trigger_None;
DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Enable;
DAC_InitStructure.DAC_WaveGeneration = DAC_WaveGeneration_None;
/* DAC_InitStructure.DAC_LFSRUnmask_TriangleAmplitude = DAC_LFSRUnmask_Bits10_0; */
DAC_Init(DAC_Channel_1, &DAC_InitStructure);
/* DAC_Init(DAC_Channel_2, &DAC_InitStructure); */
/* Enable DAC Channels */
DAC_Cmd(DAC_Channel_1, ENABLE);
/* DAC_Cmd(DAC_Channel_2, ENABLE); */
}
void DacInit(void)
{
RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE);
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_DMA1, ENABLE);
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);
RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_StructInit(&GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AN;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(GPIOA, &GPIO_InitStructure);
DAC_InitTypeDef DAC_InitStructure;
DAC_StructInit(&DAC_InitStructure);
DAC_InitStructure.DAC_Trigger = DAC_Trigger_T2_TRGO;
DAC_InitStructure.DAC_WaveGeneration = DAC_WaveGeneration_None;
DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Enable;
DAC_Init(DAC_Channel_1, &DAC_InitStructure);
DAC_Cmd(DAC_Channel_1, ENABLE);
DAC_SetChannel1Data(DAC_Align_12b_R, DAC_ZERO);
}
void DacInit(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
DAC_InitTypeDef DAC_InitStructure;
DacSinusCalculate();
RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE);
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1, ENABLE);
RCC_AHBPeriphClockCmd(GENERATOR_PIN_CLK, ENABLE);
RCC_APB1PeriphClockCmd(GENERATOR_TIMER_CLK, ENABLE);
RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE);
GPIO_StructInit(&GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = GENERATOR_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AN;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(GENERATOR_PORT, &GPIO_InitStructure);
DAC_StructInit(&DAC_InitStructure);
DAC_InitStructure.DAC_Trigger = DAC_Trigger_None;
DAC_InitStructure.DAC_WaveGeneration = DAC_WaveGeneration_None;
DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Enable;
DAC_Init(DAC_Channel_1, &DAC_InitStructure);
//delay_us(100);
DAC_Cmd(DAC_Channel_1, ENABLE);
DAC_SetChannel1Data(DAC_Align_12b_R, DAC_ZERO);
}
static void dac2_config(void)
{
DAC_InitTypeDef DAC_InitStructure;
DMA_InitTypeDef DMA_InitStructure;
NVIC_InitTypeDef NVIC_InitStructure;
/* DAC channel 2 Configuration (see notes in dac1_config() above) */
DAC_StructInit(&DAC_InitStructure);
DAC_InitStructure.DAC_Trigger = DAC_Trigger_T6_TRGO;
DAC_InitStructure.DAC_WaveGeneration = DAC_WaveGeneration_None;
DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Enable;
DAC_Init(DAC_Channel_2, &DAC_InitStructure);
/* DMA1_Stream6 channel7 configuration **************************************/
DMA_DeInit(DMA1_Stream6);
DMA_InitStructure.DMA_Channel = DMA_Channel_7;
DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)DAC_DHR12R2_ADDRESS;
DMA_InitStructure.DMA_Memory0BaseAddr = (uint32_t)dac2_buf;
DMA_InitStructure.DMA_DIR = DMA_DIR_MemoryToPeripheral;
DMA_InitStructure.DMA_BufferSize = DAC_BUF_SZ;
DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;
DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;
DMA_InitStructure.DMA_Mode = DMA_Mode_Circular;
DMA_InitStructure.DMA_Priority = DMA_Priority_High;
DMA_InitStructure.DMA_FIFOMode = DMA_FIFOMode_Disable;
DMA_InitStructure.DMA_FIFOThreshold = DMA_FIFOThreshold_HalfFull;
DMA_InitStructure.DMA_MemoryBurst = DMA_MemoryBurst_Single;
DMA_InitStructure.DMA_PeripheralBurst = DMA_PeripheralBurst_Single;
DMA_Init(DMA1_Stream6, &DMA_InitStructure);
/* Enable DMA Half & Complete interrupts */
DMA_ITConfig(DMA1_Stream6, DMA_IT_TC | DMA_IT_HT, ENABLE);
/* Enable the DMA Stream IRQ Channel */
NVIC_InitStructure.NVIC_IRQChannel = DMA1_Stream6_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
/* Enable DMA1_Stream6 */
DMA_Cmd(DMA1_Stream6, ENABLE);
/* Enable DAC Channel 2 */
DAC_Cmd(DAC_Channel_2, ENABLE);
/* Enable DMA for DAC Channel 2 */
DAC_DMACmd(DAC_Channel_2, ENABLE);
}
/**
@brief Init DAC.
@param[in] n DAC channel
*/
void dac_init(uint8_t n)
{
RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE);
DAC_InitTypeDef daci;
DAC_StructInit(&daci);
DAC_Init(n == 1 ? DAC_Channel_1 : DAC_Channel_2, &daci);
DAC_Cmd(n == 1 ? DAC_Channel_1 : DAC_Channel_2, ENABLE);
GPIO_InitTypeDef iotd;
GPIO_StructInit(&iotd);
iotd.GPIO_Pin = n == 1 ? GPIO_Pin_4 : GPIO_Pin_5;
iotd.GPIO_Mode = GPIO_Mode_AIN;
GPIO_Init(GPIOA, &iotd);
}
inline void Pin5DAC2Config0(void) {
GPIO_InitTypeDef GPIO_InitStructure;
DAC_InitTypeDef DAC_InitStructure;
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);
RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AN;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(GPIOA, &GPIO_InitStructure);
DAC_StructInit(&DAC_InitStructure);
DAC_InitStructure.DAC_Trigger = DAC_Trigger_None;
DAC_InitStructure.DAC_WaveGeneration = DAC_WaveGeneration_None;
DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Enable;
DAC_Init(DAC_Channel_2, &DAC_InitStructure);
DAC_Cmd(DAC_Channel_2, ENABLE);
}
/**
* @brief Configures the DAC channel 1 with output buffer enabled.
* @param None
* @retval None
*/
void DAC_Config(void)
{
/* Init Structure definition */
DAC_InitTypeDef DAC_InitStructure;
/* DAC clock enable */
RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE);
/* Fill DAC InitStructure */
DAC_StructInit(&DAC_InitStructure);
DAC_InitStructure.DAC_Trigger = DAC_Trigger_None;
DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Enable;
/* DAC Channel1 Init */
DAC_Init(DAC_Channel_1, &DAC_InitStructure);
/* Enable DAC Channel1 */
DAC_Cmd(DAC_Channel_1, ENABLE);
/* Set DAC Channel1 DHR register: DAC_OUT1 = (3.3 * 2000) / 4095 ~ 1.61 V */
DAC_SetChannel1Data(DAC_Align_12b_R, 2000);
}
void dac_init() {
#ifdef PHOTON_DAC
pinMode(DAC1, OUTPUT);
pinMode(DAC2, OUTPUT);
#else
// DAC pins are PA4 and PA5
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_StructInit(&GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
GPIO_Init(GPIOA, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_5;
GPIO_Init(GPIOA, &GPIO_InitStructure);
DAC_InitTypeDef DAC_InitStructure;
DAC_StructInit(&DAC_InitStructure);
/* DAC Periph clock enable */
RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE);
DAC_DeInit();
/* DAC channel1 & channel2 Configuration */
DAC_InitStructure.DAC_Trigger = DAC_Trigger_None;
DAC_InitStructure.DAC_WaveGeneration = DAC_WaveGeneration_None;
DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Enable;
DAC_Init(DAC_Channel_1, &DAC_InitStructure);
DAC_Init(DAC_Channel_2, &DAC_InitStructure);
/* Enable DAC Channel1 */
DAC_Cmd(DAC_Channel_1, ENABLE);
/* Enable DAC Channel2 */
DAC_Cmd(DAC_Channel_2, ENABLE);
/* Enable DAC conversion by software */
DAC_DualSoftwareTriggerCmd(ENABLE);
DAC_SetDualChannelData(DAC_Align_12b_R, 0x800, 0x800);
#endif
}
static void dac1_config(void)
{
DAC_InitTypeDef DAC_InitStructure;
DMA_InitTypeDef DMA_InitStructure;
NVIC_InitTypeDef NVIC_InitStructure;
/* DAC channel 1 Configuration */
/*
This line fixed a bug that cost me 5 days, bad wave amplitude
value, and some STM32F4 periph library bugs caused triangle wave
geneartion to be enable resulting in a low level tone on the
SM1000, that we thought was caused by analog issues like layour
or power supply biasing
*/
DAC_StructInit(&DAC_InitStructure);
DAC_InitStructure.DAC_Trigger = DAC_Trigger_T7_TRGO;
DAC_InitStructure.DAC_WaveGeneration = DAC_WaveGeneration_None;
/*External buffering is needed to get nice square samples at Fs=2Mhz. See DM00129215.pdf */
DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Disable;
DAC_Init(DAC_Channel_1, &DAC_InitStructure);
/* DMA1_Stream5 channel7 configuration **************************************/
/* Table 35 page 219 of the monster data sheet */
DMA_DeInit(DMA1_Stream5);
DMA_InitStructure.DMA_Channel = DMA_Channel_7;
DMA_InitStructure.DMA_PeripheralBaseAddr = (uint32_t)DAC_DHR12R1_ADDRESS;
DMA_InitStructure.DMA_Memory0BaseAddr = (uint32_t)dac1_buf;
DMA_InitStructure.DMA_DIR = DMA_DIR_MemoryToPeripheral;
DMA_InitStructure.DMA_BufferSize = DAC_DUC_BUF_SZ;
DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;
DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;
DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;
DMA_InitStructure.DMA_Mode = DMA_Mode_Circular;
DMA_InitStructure.DMA_Priority = DMA_Priority_High;
DMA_InitStructure.DMA_FIFOMode = DMA_FIFOMode_Disable;
DMA_InitStructure.DMA_FIFOThreshold = DMA_FIFOThreshold_HalfFull;
DMA_InitStructure.DMA_MemoryBurst = DMA_MemoryBurst_Single;
DMA_InitStructure.DMA_PeripheralBurst = DMA_PeripheralBurst_Single;
DMA_Init(DMA1_Stream5, &DMA_InitStructure);
/* Enable DMA Half & Complete interrupts */
DMA_ITConfig(DMA1_Stream5, DMA_IT_TC | DMA_IT_HT, ENABLE);
/* Enable the DMA Stream IRQ Channel */
NVIC_InitStructure.NVIC_IRQChannel = DMA1_Stream5_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
/* Enable DMA1_Stream5 */
DMA_Cmd(DMA1_Stream5, ENABLE);
/* Enable DAC Channel 1 */
DAC_Cmd(DAC_Channel_1, ENABLE);
/* Enable DMA for DAC Channel 1 */
DAC_DMACmd(DAC_Channel_1, ENABLE);
}
void InitializeAudio(int plln, int pllr, int i2sdiv, int i2sodd) {
GPIO_InitTypeDef GPIO_InitStructure;
DAC_InitTypeDef DAC_InitStruct;
TIM_TimeBaseInitTypeDef TIM_InitStruct;
// Initialize state.
CallbackFunction = NULL;
CallbackContext = NULL;
NextBufferSamples = NULL;
NextBufferLength = 0;
BufferNumber = 0;
DMARunning = false;
volatile int i;
// Turn on peripherals.
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOB, ENABLE);
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOC, ENABLE);
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOD, ENABLE);
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_DMA1, ENABLE);
RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE);
RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM6, ENABLE);
TIM_TimeBaseStructInit(&TIM_InitStruct);
TIM_InitStruct.TIM_Period = 90; //approx 44khz
TIM_InitStruct.TIM_Prescaler = 20;
TIM_TimeBaseInit(TIM6, &TIM_InitStruct);
/* TIM2 TRGO selection */
TIM_SelectOutputTrigger(TIM6, TIM_TRGOSource_Update);
// Enable GPIO port A4 as an analog output
//
GPIO_StructInit( &GPIO_InitStructure );
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AN;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(GPIOA, &GPIO_InitStructure);
//
// Configure DAC channel 1
//
DAC_StructInit( &DAC_InitStruct );
DAC_InitStruct.DAC_WaveGeneration = DAC_WaveGeneration_None;
DAC_InitStruct.DAC_Trigger = DAC_Trigger_T6_TRGO;
DAC_InitStruct.DAC_OutputBuffer = DAC_OutputBuffer_Enable ;
DAC_Init(DAC_Channel_1, &DAC_InitStruct );
//
// Enable DAC channel 1
//
// DMAEnable();
NVIC_InitTypeDef NVIC_InitStructure;
NVIC_InitStructure.NVIC_IRQChannel = DMA1_Stream5_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 4;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 4;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
}
void CIO::startInt()
{
if ((ADC_GetFlagStatus(ADC1, ADC_FLAG_EOC) != RESET))
io.interrupt();
// ADC1 PA0 analog input
// ADC2 PA1 analog input
// DAC1 PA4 analog output
// Init the ADC
GPIO_InitTypeDef GPIO_InitStruct;
ADC_InitTypeDef ADC_InitStructure;
ADC_CommonInitTypeDef ADC_CommonInitStructure;
GPIO_StructInit(&GPIO_InitStruct);
ADC_CommonStructInit(&ADC_CommonInitStructure);
ADC_StructInit(&ADC_InitStructure);
// Enable ADC clock
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);
#if defined(SEND_RSSI_DATA)
RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1 | RCC_APB2Periph_ADC2, ENABLE);
#else
RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1, ENABLE);
#endif
// For ADC1 on PA0, ADC2 on PA1
#if defined(SEND_RSSI_DATA)
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1;
#else
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_0;
#endif
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AN;
GPIO_InitStruct.GPIO_PuPd = GPIO_PuPd_NOPULL ;
GPIO_Init(GPIOA, &GPIO_InitStruct);
// Init ADCs in dual mode, div clock by two
ADC_CommonInitStructure.ADC_Mode = ADC_DualMode_RegSimult;
ADC_CommonInitStructure.ADC_Prescaler = ADC_Prescaler_Div2;
ADC_CommonInitStructure.ADC_DMAAccessMode = ADC_DMAAccessMode_Disabled;
ADC_CommonInitStructure.ADC_TwoSamplingDelay = ADC_TwoSamplingDelay_5Cycles;
ADC_CommonInit(&ADC_CommonInitStructure);
// Init ADC1 and ADC2: 12bit, single-conversion
ADC_InitStructure.ADC_Resolution = ADC_Resolution_12b;
ADC_InitStructure.ADC_ScanConvMode = DISABLE;
ADC_InitStructure.ADC_ContinuousConvMode = DISABLE;
ADC_InitStructure.ADC_ExternalTrigConvEdge = 0;
ADC_InitStructure.ADC_ExternalTrigConv = 0;
ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
ADC_InitStructure.ADC_NbrOfConversion = 1;
ADC_Init(ADC1, &ADC_InitStructure);
ADC_EOCOnEachRegularChannelCmd(ADC1, ENABLE);
ADC_RegularChannelConfig(ADC1, ADC_Channel_0, 1, ADC_SampleTime_3Cycles);
// Enable ADC1
ADC_Cmd(ADC1, ENABLE);
#if defined(SEND_RSSI_DATA)
ADC_Init(ADC2, &ADC_InitStructure);
ADC_EOCOnEachRegularChannelCmd(ADC2, ENABLE);
ADC_RegularChannelConfig(ADC2, ADC_Channel_1, 1, ADC_SampleTime_3Cycles);
// Enable ADC2
ADC_Cmd(ADC2, ENABLE);
#endif
// Init the DAC
DAC_InitTypeDef DAC_InitStructure;
GPIO_StructInit(&GPIO_InitStruct);
DAC_StructInit(&DAC_InitStructure);
// GPIOA & D clock enable
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);
// DAC Periph clock enable
RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE);
// GPIO CONFIGURATION of DAC Pins
GPIO_InitStruct.GPIO_Pin = GPIO_Pin_4;
GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AN;
GPIO_InitStruct.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(GPIOA, &GPIO_InitStruct);
DAC_InitStructure.DAC_Trigger = DAC_Trigger_None;
DAC_InitStructure.DAC_WaveGeneration = DAC_WaveGeneration_None;
DAC_InitStructure.DAC_OutputBuffer = DAC_OutputBuffer_Enable;
DAC_Init(DAC_Channel_1, &DAC_InitStructure);
DAC_Cmd(DAC_Channel_1, ENABLE);
// Init the timer
RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);
TIM_TimeBaseInitTypeDef timerInitStructure;
TIM_TimeBaseStructInit (&timerInitStructure);
timerInitStructure.TIM_Prescaler = 1749; // 24 kHz
timerInitStructure.TIM_CounterMode = TIM_CounterMode_Up;
timerInitStructure.TIM_Period = 1;
timerInitStructure.TIM_ClockDivision = TIM_CKD_DIV1;
timerInitStructure.TIM_RepetitionCounter = 0;
TIM_TimeBaseInit(TIM2, &timerInitStructure);
TIM_Cmd(TIM2, ENABLE);
TIM_ITConfig(TIM2, TIM_IT_Update, ENABLE);
NVIC_InitTypeDef nvicStructure;
nvicStructure.NVIC_IRQChannel = TIM2_IRQn;
nvicStructure.NVIC_IRQChannelPreemptionPriority = 0;
nvicStructure.NVIC_IRQChannelSubPriority = 1;
nvicStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&nvicStructure);
GPIO_ResetBits(PORT_COSLED, PIN_COSLED);
GPIO_SetBits(PORT_LED, PIN_LED);
}
DAC_TIM6Class::DAC_TIM6Class(){
waveBuffer = malloc(sizeof(uint16_t) * WAVE_MEMORY_LENGTH);
if(waveBuffer==NULL){
while(1){}
}
for(int i=0;i<WAVE_MEMORY_LENGTH;i++){
waveBuffer[i] = 2048+1024*sinf(2*M_PI*i/WAVE_MEMORY_LENGTH);
}
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA,ENABLE);
/////////////////////////////////////
//GPIO
/////////////////////////////////////
GPIO_InitTypeDef gpioa4_5;
GPIO_StructInit(&gpioa4_5);
gpioa4_5.GPIO_Pin = GPIO_Pin_4 | GPIO_Pin_5;
gpioa4_5.GPIO_Mode = GPIO_Mode_AN;
gpioa4_5.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(GPIOA,&gpioa4_5);
RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC,ENABLE);
/////////////////////////////////////
//DAC
/////////////////////////////////////
DAC_InitTypeDef dac1;
DAC_StructInit(&dac1);
dac1.DAC_LFSRUnmask_TriangleAmplitude =DAC_LFSRUnmask_Bits11_0;
dac1.DAC_OutputBuffer = DAC_OutputBuffer_Enable;
dac1.DAC_Trigger = DAC_Trigger_T6_TRGO;
dac1.DAC_WaveGeneration = DAC_WaveGeneration_None;
DAC_Init(DAC_Channel_1,&dac1);
DAC_SetDualChannelData(DAC_Align_12b_R,0,0);
DAC_Cmd(DAC_Channel_1,ENABLE);
DAC_DMACmd(DAC_Channel_1,ENABLE);
RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM6,ENABLE);
TIM_TimeBaseInitTypeDef timebase;
timebase.TIM_ClockDivision = TIM_CKD_DIV1;
timebase.TIM_CounterMode = TIM_CounterMode_Up;
timebase.TIM_Prescaler = 168-1;
timebase.TIM_Period = 1;
TIM_TimeBaseInit(TIM6,&timebase);
TIM6->CR2 = 0x20; //MasterModeSelection
TIM_ITConfig(TIM6,TIM_IT_Update,ENABLE);
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_DMA1,ENABLE);
DMA_InitTypeDef dma1_5;
DMA_StructInit(&dma1_5);
dma1_5.DMA_PeripheralBaseAddr = (uint32_t)&(DAC->DHR12R1);
dma1_5.DMA_Memory0BaseAddr = (uint32_t)waveBuffer;
dma1_5.DMA_DIR = DMA_DIR_MemoryToPeripheral;
dma1_5.DMA_BufferSize = WAVE_MEMORY_LENGTH;
dma1_5.DMA_PeripheralInc = DMA_PeripheralInc_Disable;
dma1_5.DMA_MemoryInc = DMA_MemoryInc_Enable;
dma1_5.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;
dma1_5.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;
dma1_5.DMA_Mode = DMA_Mode_Circular;
dma1_5.DMA_Priority = DMA_Priority_VeryHigh;
dma1_5.DMA_Channel = DMA_Channel_7;
DMA_Init(DMA1_Stream5,&dma1_5);
DMA_Cmd(DMA1_Stream5,ENABLE);
TIM_Cmd(TIM6,ENABLE);
}
void ict_Init(void)
{
led_Init();
led_flash(LED_GREEN);
TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure;
GPIO_InitTypeDef GPIO_InitStructure;
ADC_InitTypeDef ADC_InitStructure;
DAC_InitTypeDef DAC_InitStructure;
RCC_ADCCLKConfig(RCC_PCLK2_Div8); /*72Mhz/8 = 9Mhz*/
RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1, ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC2, ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC3, ENABLE);
RCC_APB1PeriphClockCmd(RCC_APB1Periph_DAC, ENABLE);
RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE);
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOE| RCC_APB2Periph_GPIOD|
RCC_APB2Periph_GPIOC| RCC_APB2Periph_GPIOA, ENABLE);
// IO config
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_7|GPIO_Pin_8;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_Init(GPIOE, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12|GPIO_Pin_13;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_Init(GPIOD, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_Init(GPIOC, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1|GPIO_Pin_2|GPIO_Pin_4|
GPIO_Pin_5|GPIO_Pin_6|GPIO_Pin_7;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AIN;
GPIO_Init(GPIOA, &GPIO_InitStructure);
// DAC config
DAC_StructInit(&DAC_InitStructure);
DAC_Init(DAC_Channel_1, &DAC_InitStructure);
DAC_Cmd(DAC_Channel_1, ENABLE);
DAC_StructInit(&DAC_InitStructure);
DAC_Init(DAC_Channel_2, &DAC_InitStructure);
DAC_Cmd(DAC_Channel_2, ENABLE);
/* ADC1 config, Power Ouput Voltage sampling,
V1 = ADC1_CH2 = PA2 = ADC123_IN2
V2 = ADC2_CH7 = PA7 = ADC12_IN7
*/
ADC_DeInit(ADC1);
ADC_StructInit(&ADC_InitStructure);
ADC_InitStructure.ADC_Mode = ADC_Mode_Independent;
ADC_InitStructure.ADC_ScanConvMode = ENABLE;
ADC_InitStructure.ADC_ContinuousConvMode = DISABLE;
ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None;
ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
ADC_InitStructure.ADC_NbrOfChannel = 0;
ADC_Init(ADC1, &ADC_InitStructure);
ADC_InjectedSequencerLengthConfig(ADC1, 4);
ADC_InjectedChannelConfig(ADC1, ADC_Channel_2, 1, ADC_SampleTime_55Cycles5); //9Mhz/(71.5 + 12.5) = 107.1Khz
ADC_InjectedChannelConfig(ADC1, ADC_Channel_7, 2, ADC_SampleTime_55Cycles5);
ADC_InjectedChannelConfig(ADC1, ADC_Channel_1, 3, ADC_SampleTime_55Cycles5); //I0
ADC_InjectedChannelConfig(ADC1, ADC_Channel_6, 4, ADC_SampleTime_55Cycles5); //I1
ADC_ExternalTrigInjectedConvConfig(ADC1, ADC_ExternalTrigInjecConv_None);
ADC_Cmd(ADC1, ENABLE);
ADC_ResetCalibration(ADC1);
while (ADC_GetResetCalibrationStatus(ADC1));
ADC_StartCalibration(ADC1);
while (ADC_GetCalibrationStatus(ADC1));
ADC_SoftwareStartInjectedConvCmd(ADC1, ENABLE);
/* ADC2 config, current sampling & over current protection
* I1 = ADC1_CH1 = PA1 = ADC123_IN1
*/
ADC_DeInit(ADC2);
ADC_StructInit(&ADC_InitStructure);
ADC_InitStructure.ADC_Mode = ADC_Mode_Independent;
ADC_InitStructure.ADC_ScanConvMode = DISABLE;
ADC_InitStructure.ADC_ContinuousConvMode = ENABLE;
ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None;
ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
ADC_Init(ADC2, &ADC_InitStructure);
ADC_RegularChannelConfig(ADC2, ADC_Channel_1, 1, ADC_SampleTime_71Cycles5); //9Mhz/(71.5 + 12.5) = 107.1Khz
ADC_Cmd(ADC2, ENABLE);
ADC_ResetCalibration(ADC2);
while (ADC_GetResetCalibrationStatus(ADC2));
ADC_StartCalibration(ADC2);
while (ADC_GetCalibrationStatus(ADC2));
ADC_AnalogWatchdogThresholdsConfig(ADC2, mA2d(100), 0x000);
ADC_AnalogWatchdogSingleChannelConfig(ADC2, ADC_Channel_1);
ADC_AnalogWatchdogCmd(ADC2, ADC_AnalogWatchdog_SingleRegEnable);
NVIC_InitTypeDef NVIC_InitStructure;
NVIC_InitStructure.NVIC_IRQChannel = ADC1_2_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
//START
ADC_ITConfig(ADC2, ADC_IT_AWD, ENABLE);
ADC_SoftwareStartConvCmd(ADC2, ENABLE);
/* ADC3 config, current sampling & over current protection
* I2 = ADC2_CH6 = PA6 = ADC12_IN6
*/
ADC_DeInit(ADC3);
ADC_StructInit(&ADC_InitStructure);
ADC_InitStructure.ADC_Mode = ADC_Mode_Independent;
ADC_InitStructure.ADC_ScanConvMode = DISABLE;
ADC_InitStructure.ADC_ContinuousConvMode = ENABLE;
ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None;
ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right;
ADC_Init(ADC3, &ADC_InitStructure);
ADC_RegularChannelConfig(ADC3, ADC_Channel_6, 1, ADC_SampleTime_71Cycles5); //9Mhz/(71.5 + 12.5) = 107.1Khz
ADC_Cmd(ADC3, ENABLE);
ADC_ResetCalibration(ADC3);
while (ADC_GetResetCalibrationStatus(ADC3));
ADC_StartCalibration(ADC3);
while (ADC_GetCalibrationStatus(ADC3));
ADC_SoftwareStartConvCmd(ADC3, ENABLE);
ADC_AnalogWatchdogThresholdsConfig(ADC3, mA2d(100),0x000);
ADC_AnalogWatchdogSingleChannelConfig(ADC3, ADC_Channel_6);
ADC_AnalogWatchdogCmd(ADC3, ADC_AnalogWatchdog_SingleRegEnable);
NVIC_InitStructure.NVIC_IRQChannel = ADC3_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
//START
ADC_ITConfig(ADC3, ADC_IT_AWD, ENABLE);
ADC_SoftwareStartConvCmd(ADC3, ENABLE);
// TIM config
TIM_TimeBaseStructure.TIM_Period = 100 - 1; //Fclk = 10KHz /100 = 100Hz
TIM_TimeBaseStructure.TIM_Prescaler = 7200 - 1; //prediv to 72MHz to 10KHz
TIM_TimeBaseStructure.TIM_ClockDivision = 0;
TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up;
TIM_TimeBaseInit(TIM2, &TIM_TimeBaseStructure);
TIM_ClearFlag(TIM2, TIM_FLAG_Update);
TIM_ITConfig(TIM2, TIM_IT_Update, ENABLE);
TIM_Cmd(TIM2, ENABLE);
NVIC_InitStructure.NVIC_IRQChannel = TIM2_IRQn;
NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
NVIC_Init(&NVIC_InitStructure);
GPIO_ResetBits(GPIOD, GPIO_Pin_12);
GPIO_ResetBits(GPIOD, GPIO_Pin_13);
mbi5025_Init(&ict_mbi5025);
mbi5025_EnableOE(&ict_mbi5025);
}
