static void
dcphy_status(struct mii_softc *sc)
{
struct mii_data *mii = sc->mii_pdata;
int reg, anlpar, tstat = 0;
struct dc_softc *dc_sc;
dc_sc = mii->mii_ifp->if_softc;
mii->mii_media_status = IFM_AVALID;
mii->mii_media_active = IFM_ETHER;
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
return;
reg = CSR_READ_4(dc_sc, DC_10BTSTAT);
if (!(reg & DC_TSTAT_LS10) || !(reg & DC_TSTAT_LS100))
mii->mii_media_status |= IFM_ACTIVE;
if (CSR_READ_4(dc_sc, DC_10BTCTRL) & DC_TCTL_AUTONEGENBL) {
/* Erg, still trying, I guess... */
tstat = CSR_READ_4(dc_sc, DC_10BTSTAT);
if ((tstat & DC_TSTAT_ANEGSTAT) != DC_ASTAT_AUTONEGCMP) {
if ((DC_IS_MACRONIX(dc_sc) || DC_IS_PNICII(dc_sc)) &&
(tstat & DC_TSTAT_ANEGSTAT) == DC_ASTAT_DISABLE)
goto skip;
mii->mii_media_active |= IFM_NONE;
return;
}
if (tstat & DC_TSTAT_LP_CAN_NWAY) {
anlpar = tstat >> 16;
if (anlpar & ANLPAR_TX_FD &&
sc->mii_capabilities & BMSR_100TXFDX)
mii->mii_media_active |= IFM_100_TX | IFM_FDX;
else if (anlpar & ANLPAR_T4 &&
sc->mii_capabilities & BMSR_100T4)
mii->mii_media_active |= IFM_100_T4 | IFM_HDX;
else if (anlpar & ANLPAR_TX &&
sc->mii_capabilities & BMSR_100TXHDX)
mii->mii_media_active |= IFM_100_TX | IFM_HDX;
else if (anlpar & ANLPAR_10_FD)
mii->mii_media_active |= IFM_10_T | IFM_FDX;
else if (anlpar & ANLPAR_10)
mii->mii_media_active |= IFM_10_T | IFM_HDX;
else
mii->mii_media_active |= IFM_NONE;
if (DC_IS_INTEL(dc_sc))
DC_CLRBIT(dc_sc, DC_10BTCTRL,
DC_TCTL_AUTONEGENBL);
return;
}
/*
* Attach the interface. Allocate softc structures, do ifmedia
* setup and ethernet/BPF attach.
*/
void
dc_pci_attach(struct device *parent, struct device *self, void *aux)
{
const char *intrstr = NULL;
pcireg_t command;
struct dc_pci_softc *psc = (struct dc_pci_softc *)self;
struct dc_softc *sc = &psc->psc_softc;
struct pci_attach_args *pa = aux;
pci_chipset_tag_t pc = pa->pa_pc;
pci_intr_handle_t ih;
int found = 0;
psc->psc_pc = pa->pa_pc;
sc->sc_dmat = pa->pa_dmat;
pci_set_powerstate(pa->pa_pc, pa->pa_tag, PCI_PMCSR_STATE_D0);
sc->dc_csid = pci_conf_read(pc, pa->pa_tag, PCI_SUBSYS_ID_REG);
/*
* Map control/status registers.
*/
#ifdef DC_USEIOSPACE
if (pci_mapreg_map(pa, DC_PCI_CFBIO,
PCI_MAPREG_TYPE_IO, 0,
&sc->dc_btag, &sc->dc_bhandle, NULL, &psc->psc_mapsize, 0)) {
printf(": can't map i/o space\n");
return;
}
#else
if (pci_mapreg_map(pa, DC_PCI_CFBMA,
PCI_MAPREG_TYPE_MEM|PCI_MAPREG_MEM_TYPE_32BIT, 0,
&sc->dc_btag, &sc->dc_bhandle, NULL, &psc->psc_mapsize, 0)) {
printf(": can't map mem space\n");
return;
}
#endif
/* Allocate interrupt */
if (pci_intr_map(pa, &ih)) {
printf(": couldn't map interrupt\n");
goto fail_1;
}
intrstr = pci_intr_string(pc, ih);
sc->sc_ih = pci_intr_establish(pc, ih, IPL_NET, dc_intr, sc,
self->dv_xname);
if (sc->sc_ih == NULL) {
printf(": couldn't establish interrupt");
if (intrstr != NULL)
printf(" at %s", intrstr);
printf("\n");
goto fail_1;
}
printf(": %s", intrstr);
/* Need this info to decide on a chip type. */
sc->dc_revision = PCI_REVISION(pa->pa_class);
/* Get the eeprom width, if possible */
if ((PCI_VENDOR(pa->pa_id) == PCI_VENDOR_LITEON &&
PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_LITEON_PNIC))
; /* PNIC has non-standard eeprom */
else if ((PCI_VENDOR(pa->pa_id) == PCI_VENDOR_XIRCOM &&
PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_XIRCOM_X3201_3_21143))
; /* XIRCOM has non-standard eeprom */
else
dc_eeprom_width(sc);
switch (PCI_VENDOR(pa->pa_id)) {
case PCI_VENDOR_DEC:
if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_DEC_21140 ||
PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_DEC_21142) {
found = 1;
sc->dc_type = DC_TYPE_21143;
sc->dc_flags |= DC_TX_POLL|DC_TX_USE_TX_INTR;
sc->dc_flags |= DC_REDUCED_MII_POLL;
dc_read_srom(sc, sc->dc_romwidth);
}
break;
case PCI_VENDOR_INTEL:
if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_INTEL_21145) {
found = 1;
sc->dc_type = DC_TYPE_21145;
sc->dc_flags |= DC_TX_POLL|DC_TX_USE_TX_INTR;
sc->dc_flags |= DC_REDUCED_MII_POLL;
dc_read_srom(sc, sc->dc_romwidth);
}
break;
case PCI_VENDOR_DAVICOM:
if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_DAVICOM_DM9100 ||
PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_DAVICOM_DM9102 ||
PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_DAVICOM_DM9009) {
found = 1;
sc->dc_type = DC_TYPE_DM9102;
sc->dc_flags |= DC_TX_COALESCE|DC_TX_INTR_ALWAYS;
sc->dc_flags |= DC_REDUCED_MII_POLL|DC_TX_STORENFWD;
sc->dc_flags |= DC_TX_ALIGN;
sc->dc_pmode = DC_PMODE_MII;
/* Increase the latency timer value. */
command = pci_conf_read(pc, pa->pa_tag, DC_PCI_CFLT);
command &= 0xFFFF00FF;
command |= 0x00008000;
pci_conf_write(pc, pa->pa_tag, DC_PCI_CFLT, command);
}
break;
case PCI_VENDOR_ADMTEK:
case PCI_VENDOR_3COM:
case PCI_VENDOR_MICROSOFT:
if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_ADMTEK_AL981) {
found = 1;
sc->dc_type = DC_TYPE_AL981;
sc->dc_flags |= DC_TX_USE_TX_INTR;
sc->dc_flags |= DC_TX_ADMTEK_WAR;
sc->dc_pmode = DC_PMODE_MII;
dc_read_srom(sc, sc->dc_romwidth);
}
if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_ADMTEK_ADM9511 ||
PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_ADMTEK_ADM9513 ||
PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_ADMTEK_AN983 ||
PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_3COM_3CSHO100BTX ||
PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_MICROSOFT_MN130) {
found = 1;
sc->dc_type = DC_TYPE_AN983;
sc->dc_flags |= DC_TX_USE_TX_INTR;
sc->dc_flags |= DC_TX_ADMTEK_WAR;
sc->dc_flags |= DC_64BIT_HASH;
sc->dc_pmode = DC_PMODE_MII;
/* Don't read SROM for - auto-loaded on reset */
}
break;
case PCI_VENDOR_MACRONIX:
case PCI_VENDOR_ACCTON:
if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_ACCTON_EN2242) {
found = 1;
sc->dc_type = DC_TYPE_AN983;
sc->dc_flags |= DC_TX_USE_TX_INTR;
sc->dc_flags |= DC_TX_ADMTEK_WAR;
sc->dc_flags |= DC_64BIT_HASH;
sc->dc_pmode = DC_PMODE_MII;
/* Don't read SROM for - auto-loaded on reset */
}
if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_MACRONIX_MX98713) {
found = 1;
if (sc->dc_revision < DC_REVISION_98713A)
sc->dc_type = DC_TYPE_98713;
if (sc->dc_revision >= DC_REVISION_98713A) {
sc->dc_type = DC_TYPE_98713A;
sc->dc_flags |= DC_21143_NWAY;
}
sc->dc_flags |= DC_REDUCED_MII_POLL;
sc->dc_flags |= DC_TX_POLL|DC_TX_USE_TX_INTR;
}
if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_MACRONIX_MX98715 ||
PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_ACCTON_EN1217) {
found = 1;
if (sc->dc_revision >= DC_REVISION_98715AEC_C &&
sc->dc_revision < DC_REVISION_98725)
sc->dc_flags |= DC_128BIT_HASH;
sc->dc_type = DC_TYPE_987x5;
sc->dc_flags |= DC_TX_POLL|DC_TX_USE_TX_INTR;
sc->dc_flags |= DC_REDUCED_MII_POLL|DC_21143_NWAY;
}
if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_MACRONIX_MX98727) {
found = 1;
sc->dc_type = DC_TYPE_987x5;
sc->dc_flags |= DC_TX_POLL|DC_TX_USE_TX_INTR;
sc->dc_flags |= DC_REDUCED_MII_POLL|DC_21143_NWAY;
}
break;
case PCI_VENDOR_COMPEX:
if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_COMPEX_98713) {
found = 1;
if (sc->dc_revision < DC_REVISION_98713A) {
sc->dc_type = DC_TYPE_98713;
sc->dc_flags |= DC_REDUCED_MII_POLL;
}
if (sc->dc_revision >= DC_REVISION_98713A)
sc->dc_type = DC_TYPE_98713A;
sc->dc_flags |= DC_TX_POLL|DC_TX_USE_TX_INTR;
}
break;
case PCI_VENDOR_LITEON:
if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_LITEON_PNICII) {
found = 1;
sc->dc_type = DC_TYPE_PNICII;
sc->dc_flags |= DC_TX_POLL|DC_TX_USE_TX_INTR;
sc->dc_flags |= DC_REDUCED_MII_POLL|DC_21143_NWAY;
sc->dc_flags |= DC_128BIT_HASH;
}
if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_LITEON_PNIC) {
found = 1;
sc->dc_type = DC_TYPE_PNIC;
sc->dc_flags |= DC_TX_STORENFWD|DC_TX_INTR_ALWAYS;
sc->dc_flags |= DC_PNIC_RX_BUG_WAR;
sc->dc_pnic_rx_buf = malloc(ETHER_MAX_DIX_LEN * 5, M_DEVBUF,
M_NOWAIT);
if (sc->dc_pnic_rx_buf == NULL)
panic("dc_pci_attach");
if (sc->dc_revision < DC_REVISION_82C169)
sc->dc_pmode = DC_PMODE_SYM;
}
break;
case PCI_VENDOR_ASIX:
if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_ASIX_AX88140A) {
found = 1;
sc->dc_type = DC_TYPE_ASIX;
sc->dc_flags |= DC_TX_USE_TX_INTR|DC_TX_INTR_FIRSTFRAG;
sc->dc_flags |= DC_REDUCED_MII_POLL;
sc->dc_pmode = DC_PMODE_MII;
}
break;
case PCI_VENDOR_CONEXANT:
if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_CONEXANT_RS7112) {
found = 1;
sc->dc_type = DC_TYPE_CONEXANT;
sc->dc_flags |= DC_TX_INTR_ALWAYS;
sc->dc_flags |= DC_REDUCED_MII_POLL;
sc->dc_pmode = DC_PMODE_MII;
dc_read_srom(sc, sc->dc_romwidth);
}
break;
case PCI_VENDOR_XIRCOM:
if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_XIRCOM_X3201_3_21143) {
found = 1;
sc->dc_type = DC_TYPE_XIRCOM;
sc->dc_flags |= DC_TX_INTR_ALWAYS;
sc->dc_flags |= DC_TX_COALESCE;
sc->dc_flags |= DC_TX_ALIGN;
sc->dc_pmode = DC_PMODE_MII;
}
break;
}
if (found == 0) {
/* This shouldn't happen if probe has done its job... */
printf(": unknown device: %x:%x\n",
PCI_VENDOR(pa->pa_id), PCI_PRODUCT(pa->pa_id));
goto fail_2;
}
/* Save the cache line size. */
if (DC_IS_DAVICOM(sc))
sc->dc_cachesize = 0;
else
sc->dc_cachesize = pci_conf_read(pc, pa->pa_tag,
DC_PCI_CFLT) & 0xFF;
/* Reset the adapter. */
dc_reset(sc);
/* Take 21143 out of snooze mode */
if (DC_IS_INTEL(sc) || DC_IS_XIRCOM(sc)) {
command = pci_conf_read(pc, pa->pa_tag, DC_PCI_CFDD);
command &= ~(DC_CFDD_SNOOZE_MODE|DC_CFDD_SLEEP_MODE);
pci_conf_write(pc, pa->pa_tag, DC_PCI_CFDD, command);
}
/*
* If we discover later (in dc_attach) that we have an
* MII with no PHY, we need to have the 21143 drive the LEDs.
* Except there are some systems like the NEC VersaPro NoteBook PC
* which have no LEDs, and twiddling these bits has adverse effects
* on them. (I.e. you suddenly can't get a link.)
*
* If mii_attach() returns an error, we leave the DC_TULIP_LEDS
* bit set, else we clear it. Since our dc(4) driver is split into
* bus-dependent and bus-independent parts, we must do set this bit
* here while we are able to do PCI configuration reads.
*/
if (DC_IS_INTEL(sc)) {
if (pci_conf_read(pc, pa->pa_tag, DC_PCI_CSID) != 0x80281033)
sc->dc_flags |= DC_TULIP_LEDS;
}
/*
* Try to learn something about the supported media.
* We know that ASIX and ADMtek and Davicom devices
* will *always* be using MII media, so that's a no-brainer.
* The tricky ones are the Macronix/PNIC II and the
* Intel 21143.
*/
if (DC_IS_INTEL(sc))
dc_parse_21143_srom(sc);
else if (DC_IS_MACRONIX(sc) || DC_IS_PNICII(sc)) {
if (sc->dc_type == DC_TYPE_98713)
sc->dc_pmode = DC_PMODE_MII;
else
sc->dc_pmode = DC_PMODE_SYM;
} else if (!sc->dc_pmode)
sc->dc_pmode = DC_PMODE_MII;
#ifdef __sparc64__
{
extern void myetheraddr(u_char *);
if (OF_getprop(PCITAG_NODE(pa->pa_tag), "local-mac-address",
sc->sc_arpcom.ac_enaddr, ETHER_ADDR_LEN) <= 0)
myetheraddr(sc->sc_arpcom.ac_enaddr);
if (sc->sc_arpcom.ac_enaddr[0] == 0x00 &&
sc->sc_arpcom.ac_enaddr[1] == 0x03 &&
sc->sc_arpcom.ac_enaddr[2] == 0xcc)
sc->dc_flags |= DC_MOMENCO_BOTCH;
sc->sc_hasmac = 1;
}
#endif
#ifdef SRM_MEDIA
sc->dc_srm_media = 0;
/* Remember the SRM console media setting */
if (DC_IS_INTEL(sc)) {
command = pci_conf_read(pc, pa->pa_tag, DC_PCI_CFDD);
command &= ~(DC_CFDD_SNOOZE_MODE|DC_CFDD_SLEEP_MODE);
switch ((command >> 8) & 0xff) {
case 3:
sc->dc_srm_media = IFM_10_T;
break;
case 4:
sc->dc_srm_media = IFM_10_T | IFM_FDX;
break;
case 5:
sc->dc_srm_media = IFM_100_TX;
break;
case 6:
sc->dc_srm_media = IFM_100_TX | IFM_FDX;
break;
}
if (sc->dc_srm_media)
sc->dc_srm_media |= IFM_ACTIVE | IFM_ETHER;
}
#endif
dc_attach(sc);
return;
fail_2:
pci_intr_disestablish(pc, sc->sc_ih);
fail_1:
bus_space_unmap(sc->dc_btag, sc->dc_bhandle, psc->psc_mapsize);
}
static void
dcphy_status(struct mii_softc *sc)
{
struct mii_data *mii = sc->mii_pdata;
int anlpar, tstat;
struct dc_softc *dc_sc;
dc_sc = mii->mii_ifp->if_softc;
mii->mii_media_status = IFM_AVALID;
mii->mii_media_active = IFM_ETHER;
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
return;
tstat = CSR_READ_4(dc_sc, DC_10BTSTAT);
if (!(tstat & DC_TSTAT_LS10) || !(tstat & DC_TSTAT_LS100))
mii->mii_media_status |= IFM_ACTIVE;
if (CSR_READ_4(dc_sc, DC_10BTCTRL) & DC_TCTL_AUTONEGENBL) {
/* Erg, still trying, I guess... */
if ((tstat & DC_TSTAT_ANEGSTAT) != DC_ASTAT_AUTONEGCMP) {
if ((DC_IS_MACRONIX(dc_sc) || DC_IS_PNICII(dc_sc)) &&
(tstat & DC_TSTAT_ANEGSTAT) == DC_ASTAT_DISABLE)
goto skip;
mii->mii_media_active |= IFM_NONE;
return;
}
if (tstat & DC_TSTAT_LP_CAN_NWAY) {
anlpar = tstat >> 16;
if (anlpar & ANLPAR_TX_FD &&
sc->mii_capabilities & BMSR_100TXFDX)
mii->mii_media_active |= IFM_100_TX | IFM_FDX;
else if (anlpar & ANLPAR_T4 &&
sc->mii_capabilities & BMSR_100T4)
mii->mii_media_active |= IFM_100_T4 | IFM_HDX;
else if (anlpar & ANLPAR_TX &&
sc->mii_capabilities & BMSR_100TXHDX)
mii->mii_media_active |= IFM_100_TX | IFM_HDX;
else if (anlpar & ANLPAR_10_FD)
mii->mii_media_active |= IFM_10_T | IFM_FDX;
else if (anlpar & ANLPAR_10)
mii->mii_media_active |= IFM_10_T | IFM_HDX;
else
mii->mii_media_active |= IFM_NONE;
if (DC_IS_INTEL(dc_sc))
DC_CLRBIT(dc_sc, DC_10BTCTRL,
DC_TCTL_AUTONEGENBL);
return;
}
/*
* If the other side doesn't support NWAY, then the
* best we can do is determine if we have a 10Mbps or
* 100Mbps link. There's no way to know if the link
* is full or half duplex, so we default to half duplex
* and hope that the user is clever enough to manually
* change the media settings if we're wrong.
*/
if (!(tstat & DC_TSTAT_LS100))
mii->mii_media_active |= IFM_100_TX | IFM_HDX;
else if (!(tstat & DC_TSTAT_LS10))
mii->mii_media_active |= IFM_10_T | IFM_HDX;
else
mii->mii_media_active |= IFM_NONE;
if (DC_IS_INTEL(dc_sc))
DC_CLRBIT(dc_sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL);
return;
}
