C++ (Cpp) DVFS_SN_STR Exemples

Exemple #1

Fichier : fimc-is-dvfs.c Projet : bju2000/android_kernel_samsung_slteskt

DECLARE_DVFS_CHK_FUNC(FIMC_IS_SN_FRONT_VT1);
DECLARE_DVFS_CHK_FUNC(FIMC_IS_SN_FRONT_VT2);
DECLARE_DVFS_CHK_FUNC(FIMC_IS_SN_FRONT_PREVIEW);
DECLARE_DVFS_CHK_FUNC(FIMC_IS_SN_REAR_CAPTURE);
DECLARE_DVFS_CHK_FUNC(FIMC_IS_SN_DIS_ENABLE);

#if defined(ENABLE_DVFS)
/*
 * Static Scenario Set
 * You should describe static scenario by priorities of scenario.
 * And you should name array 'static_scenarios'
 */
static struct fimc_is_dvfs_scenario static_scenarios[] = {
	{
		.scenario_id		= FIMC_IS_SN_DUAL_CAMCORDING,
		.scenario_nm		= DVFS_SN_STR(FIMC_IS_SN_DUAL_CAMCORDING),
		.check_func		= GET_DVFS_CHK_FUNC(FIMC_IS_SN_DUAL_CAMCORDING),
	}, {
		.scenario_id		= FIMC_IS_SN_DUAL_PREVIEW,
		.scenario_nm		= DVFS_SN_STR(FIMC_IS_SN_DUAL_PREVIEW),
		.check_func		= GET_DVFS_CHK_FUNC(FIMC_IS_SN_DUAL_PREVIEW),
	}, {
		.scenario_id		= FIMC_IS_SN_HIGH_SPEED_FPS,
		.scenario_nm		= DVFS_SN_STR(FIMC_IS_SN_HIGH_SPEED_FPS),
		.check_func		= GET_DVFS_CHK_FUNC(FIMC_IS_SN_HIGH_SPEED_FPS),
	}, {
		.scenario_id		= FIMC_IS_SN_REAR_CAMCORDING_FHD,
		.scenario_nm		= DVFS_SN_STR(FIMC_IS_SN_REAR_CAMCORDING_FHD),
		.check_func		= GET_DVFS_CHK_FUNC(FIMC_IS_SN_REAR_CAMCORDING_FHD),
	}, {
		.scenario_id		= FIMC_IS_SN_REAR_CAMCORDING_UHD,

Exemple #2

Fichier : fimc-is-dvfs.c Projet : ShedrockN4/wiliteneo

DECLARE_DVFS_CHK_FUNC(FIMC_IS_SN_PREVIEW_HIGH_SPEED_FPS);
DECLARE_DVFS_CHK_FUNC(FIMC_IS_SN_VIDEO_HIGH_SPEED_60FPS);
DECLARE_DVFS_CHK_FUNC(FIMC_IS_SN_VIDEO_HIGH_SPEED_120FPS);
DECLARE_DVFS_CHK_FUNC(FIMC_IS_SN_VIDEO_HIGH_SPEED_240FPS);

#if defined(ENABLE_DVFS)
/*
 * Static Scenario Set
 * You should describe static scenario by priorities of scenario.
 * And you should name array 'static_scenarios'
 */

static struct fimc_is_dvfs_scenario static_scenarios[] = {
	{
		.scenario_id		= FIMC_IS_SN_DUAL_CAMCORDING,
		.scenario_nm		= DVFS_SN_STR(FIMC_IS_SN_DUAL_CAMCORDING),
		.check_func		= GET_DVFS_CHK_FUNC(FIMC_IS_SN_DUAL_CAMCORDING),
	}, {
		.scenario_id		= FIMC_IS_SN_DUAL_PREVIEW,
		.scenario_nm		= DVFS_SN_STR(FIMC_IS_SN_DUAL_PREVIEW),
		.check_func		= GET_DVFS_CHK_FUNC(FIMC_IS_SN_DUAL_PREVIEW),
	}, {
		.scenario_id		= FIMC_IS_SN_PREVIEW_HIGH_SPEED_FPS,
		.scenario_nm		= DVFS_SN_STR(FIMC_IS_SN_PREVIEW_HIGH_SPEED_FPS),
		.check_func		= GET_DVFS_CHK_FUNC(FIMC_IS_SN_PREVIEW_HIGH_SPEED_FPS),
	}, {
		.scenario_id		= FIMC_IS_SN_VIDEO_HIGH_SPEED_60FPS,
		.scenario_nm		= DVFS_SN_STR(FIMC_IS_SN_VIDEO_HIGH_SPEED_60FPS),
		.check_func		= GET_DVFS_CHK_FUNC(FIMC_IS_SN_VIDEO_HIGH_SPEED_60FPS),
	}, {
		.scenario_id		= FIMC_IS_SN_VIDEO_HIGH_SPEED_120FPS,

Exemple #3

Fichier : fimc-is-dvfs.c Projet : qkdang/m462

DECLARE_DVFS_CHK_FUNC(FIMC_IS_SN_REAR_CAPTURE);
DECLARE_DVFS_CHK_FUNC(FIMC_IS_SN_DIS_ENABLE);
#endif

#if defined(ENABLE_DVFS)
/*
 * Static Scenario Set
 * You should describe static scenario by priorities of scenario.
 * And you should name array 'static_scenarios'
 */

#if defined(CONFIG_CAMERA_CUSTOM_SUPPORT)
static struct fimc_is_dvfs_scenario static_scenarios[] = {
	{
		.scenario_id		= FIMC_IS_SN_FRONT_PREVIEW_5M,
		.scenario_nm		= DVFS_SN_STR(FIMC_IS_SN_FRONT_PREVIEW_5M),
		.check_func		= GET_DVFS_CHK_FUNC(FIMC_IS_SN_FRONT_PREVIEW_5M),
	}, {
		.scenario_id		= FIMC_IS_SN_FRONT_PREVIEW_FHD,
		.scenario_nm		= DVFS_SN_STR(FIMC_IS_SN_FRONT_PREVIEW_FHD),
		.check_func		= GET_DVFS_CHK_FUNC(FIMC_IS_SN_FRONT_PREVIEW_FHD),
	}, {
		.scenario_id		= FIMC_IS_SN_FRONT_CAMCORDING_2K,
		.scenario_nm		= DVFS_SN_STR(FIMC_IS_SN_FRONT_CAMCORDING_2K),
		.check_func		= GET_DVFS_CHK_FUNC(FIMC_IS_SN_FRONT_CAMCORDING_2K),
	}, {
		.scenario_id		= FIMC_IS_SN_FRONT_CAMCORDING_FHD,
		.scenario_nm		= DVFS_SN_STR(FIMC_IS_SN_FRONT_CAMCORDING_FHD),
		.check_func		= GET_DVFS_CHK_FUNC(FIMC_IS_SN_FRONT_CAMCORDING_FHD),
	}, {
		.scenario_id		= FIMC_IS_SN_FRONT_HIGH_SPEED_FPS,