void FAnimNode_TwoBoneIK::EvaluateBoneTransforms(USkeletalMeshComponent* SkelComp, const FBoneContainer & RequiredBones, FA2CSPose& MeshBases, TArray<FBoneTransform>& OutBoneTransforms)
{
check(OutBoneTransforms.Num() == 0);
// Get indices of the lower and upper limb bones and check validity.
bool bInvalidLimb = false;
const int32 EndBoneIndex = IKBone.BoneIndex;
const int32 LowerLimbIndex = RequiredBones.GetParentBoneIndex(EndBoneIndex);
if (LowerLimbIndex == INDEX_NONE)
{
bInvalidLimb = true;
}
const int32 UpperLimbIndex = RequiredBones.GetParentBoneIndex(LowerLimbIndex);
if (UpperLimbIndex == INDEX_NONE)
{
bInvalidLimb = true;
}
const bool bInBoneSpace = (EffectorLocationSpace == BCS_ParentBoneSpace) || (EffectorLocationSpace == BCS_BoneSpace);
const int32 EffectorSpaceBoneIndex = bInBoneSpace ? RequiredBones.GetPoseBoneIndexForBoneName(EffectorSpaceBoneName) : INDEX_NONE;
if (bInBoneSpace && ((EffectorSpaceBoneIndex == INDEX_NONE) || !RequiredBones.Contains(EffectorSpaceBoneIndex)))
{
bInvalidLimb = true;
}
// If we walked past the root, this controlled is invalid, so return no affected bones.
if( bInvalidLimb )
{
return;
}
// Get Local Space transforms for our bones. We do this first in case they already are local.
// As right after we get them in component space. (And that does the auto conversion).
// We might save one transform by doing local first...
const FTransform EndBoneLocalTransform = MeshBases.GetLocalSpaceTransform(IKBone.BoneIndex);
// Now get those in component space...
FTransform UpperLimbCSTransform = MeshBases.GetComponentSpaceTransform(UpperLimbIndex);
FTransform LowerLimbCSTransform = MeshBases.GetComponentSpaceTransform(LowerLimbIndex);
FTransform EndBoneCSTransform = MeshBases.GetComponentSpaceTransform(IKBone.BoneIndex);
// Get current position of root of limb.
// All position are in Component space.
const FVector RootPos = UpperLimbCSTransform.GetTranslation();
const FVector InitialJointPos = LowerLimbCSTransform.GetTranslation();
const FVector InitialEndPos = EndBoneCSTransform.GetTranslation();
// Transform EffectorLocation from EffectorLocationSpace to ComponentSpace.
FTransform EffectorTransform(EffectorLocation);
FAnimationRuntime::ConvertBoneSpaceTransformToCS(SkelComp, MeshBases, EffectorTransform, EffectorSpaceBoneIndex, EffectorLocationSpace);
// This is our reach goal.
FVector DesiredPos = EffectorTransform.GetTranslation();
FVector DesiredDelta = DesiredPos - RootPos;
float DesiredLength = DesiredDelta.Size();
// Check to handle case where DesiredPos is the same as RootPos.
FVector DesiredDir;
if (DesiredLength < (float)KINDA_SMALL_NUMBER)
{
DesiredLength = (float)KINDA_SMALL_NUMBER;
DesiredDir = FVector(1,0,0);
}
else
{
DesiredDir = DesiredDelta / DesiredLength;
}
// Get joint target (used for defining plane that joint should be in).
FTransform JointTargetTransform(JointTargetLocation);
const int32 JointTargetSpaceBoneIndex = (JointTargetLocationSpace == BCS_ParentBoneSpace || JointTargetLocationSpace == BCS_BoneSpace) ? RequiredBones.GetPoseBoneIndexForBoneName(JointTargetSpaceBoneName) : INDEX_NONE;
FAnimationRuntime::ConvertBoneSpaceTransformToCS(SkelComp, MeshBases, JointTargetTransform, JointTargetSpaceBoneIndex, JointTargetLocationSpace);
FVector JointTargetPos = JointTargetTransform.GetTranslation();
FVector JointTargetDelta = JointTargetPos - RootPos;
float JointTargetLength = JointTargetDelta.Size();
// Same check as above, to cover case when JointTarget position is the same as RootPos.
FVector JointPlaneNormal, JointBendDir;
if (JointTargetLength < (float)KINDA_SMALL_NUMBER)
{
JointBendDir = FVector(0,1,0);
JointPlaneNormal = FVector(0,0,1);
}
else
{
JointPlaneNormal = DesiredDir ^ JointTargetDelta;
// If we are trying to point the limb in the same direction that we are supposed to displace the joint in,
// we have to just pick 2 random vector perp to DesiredDir and each other.
if (JointPlaneNormal.Size() < (float)KINDA_SMALL_NUMBER)
{
DesiredDir.FindBestAxisVectors(JointPlaneNormal, JointBendDir);
}
else
{
JointPlaneNormal.Normalize();
// Find the final member of the reference frame by removing any component of JointTargetDelta along DesiredDir.
// This should never leave a zero vector, because we've checked DesiredDir and JointTargetDelta are not parallel.
JointBendDir = JointTargetDelta - ((JointTargetDelta | DesiredDir) * DesiredDir);
JointBendDir.Normalize();
}
}
// Find lengths of upper and lower limb in the ref skeleton.
// Use actual sizes instead of ref skeleton, so we take into account translation and scaling from other bone controllers.
float LowerLimbLength = (InitialEndPos - InitialJointPos).Size();
float UpperLimbLength = (InitialJointPos - RootPos).Size();
float MaxLimbLength = LowerLimbLength + UpperLimbLength;
if (bAllowStretching)
{
const float ScaleRange = StretchLimits.Y - StretchLimits.X;
if( ScaleRange > KINDA_SMALL_NUMBER && MaxLimbLength > KINDA_SMALL_NUMBER )
{
const float ReachRatio = DesiredLength / MaxLimbLength;
const float ScalingFactor = (StretchLimits.Y - 1.f) * FMath::Clamp<float>((ReachRatio - StretchLimits.X) / ScaleRange, 0.f, 1.f);
if (ScalingFactor > KINDA_SMALL_NUMBER)
{
LowerLimbLength *= (1.f + ScalingFactor);
UpperLimbLength *= (1.f + ScalingFactor);
MaxLimbLength *= (1.f + ScalingFactor);
}
}
}
FVector OutEndPos = DesiredPos;
FVector OutJointPos = InitialJointPos;
// If we are trying to reach a goal beyond the length of the limb, clamp it to something solvable and extend limb fully.
if (DesiredLength > MaxLimbLength)
{
OutEndPos = RootPos + (MaxLimbLength * DesiredDir);
OutJointPos = RootPos + (UpperLimbLength * DesiredDir);
}
else
{
// So we have a triangle we know the side lengths of. We can work out the angle between DesiredDir and the direction of the upper limb
// using the sin rule:
const float TwoAB = 2.f * UpperLimbLength * DesiredLength;
const float CosAngle = (TwoAB != 0.f) ? ((UpperLimbLength*UpperLimbLength) + (DesiredLength*DesiredLength) - (LowerLimbLength*LowerLimbLength)) / TwoAB : 0.f;
// If CosAngle is less than 0, the upper arm actually points the opposite way to DesiredDir, so we handle that.
const bool bReverseUpperBone = (CosAngle < 0.f);
// If CosAngle is greater than 1.f, the triangle could not be made - we cannot reach the target.
// We just have the two limbs double back on themselves, and EndPos will not equal the desired EffectorLocation.
if ((CosAngle > 1.f) || (CosAngle < -1.f))
{
// Because we want the effector to be a positive distance down DesiredDir, we go back by the smaller section.
if (UpperLimbLength > LowerLimbLength)
{
OutJointPos = RootPos + (UpperLimbLength * DesiredDir);
OutEndPos = OutJointPos - (LowerLimbLength * DesiredDir);
}
else
{
OutJointPos = RootPos - (UpperLimbLength * DesiredDir);
OutEndPos = OutJointPos + (LowerLimbLength * DesiredDir);
}
}
else
{
// Angle between upper limb and DesiredDir
const float Angle = FMath::Acos(CosAngle);
// Now we calculate the distance of the joint from the root -> effector line.
// This forms a right-angle triangle, with the upper limb as the hypotenuse.
const float JointLineDist = UpperLimbLength * FMath::Sin(Angle);
// And the final side of that triangle - distance along DesiredDir of perpendicular.
// ProjJointDistSqr can't be neg, because JointLineDist must be <= UpperLimbLength because appSin(Angle) is <= 1.
const float ProjJointDistSqr = (UpperLimbLength*UpperLimbLength) - (JointLineDist*JointLineDist);
// although this shouldn't be ever negative, sometimes Xbox release produces -0.f, causing ProjJointDist to be NaN
// so now I branch it.
float ProjJointDist = (ProjJointDistSqr>0.f)? FMath::Sqrt(ProjJointDistSqr) : 0.f;
if( bReverseUpperBone )
{
ProjJointDist *= -1.f;
}
// So now we can work out where to put the joint!
OutJointPos = RootPos + (ProjJointDist * DesiredDir) + (JointLineDist * JointBendDir);
}
}
// Update transform for upper bone.
{
// Get difference in direction for old and new joint orientations
FVector const OldDir = (InitialJointPos - RootPos).SafeNormal();
FVector const NewDir = (OutJointPos - RootPos).SafeNormal();
// Find Delta Rotation take takes us from Old to New dir
FQuat const DeltaRotation = FQuat::FindBetween(OldDir, NewDir);
// Rotate our Joint quaternion by this delta rotation
UpperLimbCSTransform.SetRotation( DeltaRotation * UpperLimbCSTransform.GetRotation() );
// And put joint where it should be.
UpperLimbCSTransform.SetTranslation( RootPos );
// Order important. First bone is upper limb.
OutBoneTransforms.Add( FBoneTransform(UpperLimbIndex, UpperLimbCSTransform) );
}
// Update transform for lower bone.
{
// Get difference in direction for old and new joint orientations
FVector const OldDir = (InitialEndPos - InitialJointPos).SafeNormal();
FVector const NewDir = (OutEndPos - OutJointPos).SafeNormal();
// Find Delta Rotation take takes us from Old to New dir
FQuat const DeltaRotation = FQuat::FindBetween(OldDir, NewDir);
// Rotate our Joint quaternion by this delta rotation
LowerLimbCSTransform.SetRotation( DeltaRotation * LowerLimbCSTransform.GetRotation() );
// And put joint where it should be.
LowerLimbCSTransform.SetTranslation( OutJointPos );
// Order important. Second bone is lower limb.
OutBoneTransforms.Add( FBoneTransform(LowerLimbIndex, LowerLimbCSTransform) );
}
// Update transform for end bone.
{
if( bTakeRotationFromEffectorSpace )
{
EndBoneCSTransform.SetRotation( EffectorTransform.GetRotation() );
}
else if( bMaintainEffectorRelRot )
{
EndBoneCSTransform = EndBoneLocalTransform * LowerLimbCSTransform;
}
// Set correct location for end bone.
EndBoneCSTransform.SetTranslation(OutEndPos);
// Order important. Third bone is End Bone.
OutBoneTransforms.Add( FBoneTransform(IKBone.BoneIndex, EndBoneCSTransform) );
}
// Make sure we have correct number of bones
check(OutBoneTransforms.Num() == 3);
}
void FAnimNode_MMDIK::EvaluateBoneTransforms(USkeletalMeshComponent* SkelComp, const FBoneContainer& RequiredBones, FA2CSPose& MeshBases, TArray<FBoneTransform>& OutBoneTransforms)
{
FVector EffectorLocation(FVector::ZeroVector);
FVector JointTargetLocation(FVector::ZeroVector);
TEnumAsByte<enum EBoneControlSpace> EffectorLocationSpace(BCS_BoneSpace);
TEnumAsByte<enum EBoneControlSpace> JointTargetLocationSpace(BCS_ParentBoneSpace);
FTransform UpperLimbCSTransform;
FTransform LowerLimbCSTransform;
FTransform EndBoneCSTransform;
FTransform JointTargetTransform;
const float BlendWeight = FMath::Clamp<float>(1.0f, 0.f, 1.f);
check(OutBoneTransforms.Num() == 0);
const FStringAssetReference& AssetRef = MMDExtendAssetRef.ToStringReference();
UMMDExtendAsset* MMDExtendAssetPtr = MMDExtendAssetRef.Get();
if (MMDExtendAssetPtr == nullptr)
{
UE_LOG(LogAnimation, Warning, TEXT("FAnimNode_MMDIK::EvaluateBoneTransforms: MMExtendPtr is nullptr!"));
return;
}
for (int32 indexIK = 0; indexIK < MMDExtendAssetPtr->IkInfoList.Num(); indexIK++)
{
JointTargetLocationSpace = BCS_ParentBoneSpace;
// Get indices of the lower and upper limb bones and check validity.
bool bInvalidLimb = false;
// IKBoneIndex
const FName EffectorSpaceBoneName = MMDExtendAssetPtr->IkInfoList[indexIK].IKBoneName;
const int32 EffectorSpaceBoneIndex = MMDExtendAssetPtr->IkInfoList[indexIK].IKBoneIndex;
const FName EndBoneName = MMDExtendAssetPtr->IkInfoList[indexIK].TargetBoneName;
const int32 EndBoneIndex = MMDExtendAssetPtr->IkInfoList[indexIK].TargetBoneIndex;
if (EffectorSpaceBoneName.IsEqual(TEXT("左つま先ＩＫ")) || EffectorSpaceBoneName.IsEqual(TEXT("右つま先ＩＫ")))
{
JointTargetLocationSpace = BCS_BoneSpace;
}
const int32 LowerLimbIndex = RequiredBones.GetParentBoneIndex(EndBoneIndex);
if (LowerLimbIndex == INDEX_NONE)
{
bInvalidLimb = true;
}
int32 UpperLimbIndex = INDEX_NONE;
if (!bInvalidLimb)
{
UpperLimbIndex = RequiredBones.GetParentBoneIndex(LowerLimbIndex);
if (UpperLimbIndex == INDEX_NONE)
{
bInvalidLimb = true;
}
}
if (!bInvalidLimb)
{
int32 JointTargetSpaceBoneIndex = INDEX_NONE;
if (MMDExtendAssetPtr->IkInfoList[indexIK].ikLinkList.Num() > 0)
{
JointTargetSpaceBoneIndex = MMDExtendAssetPtr->IkInfoList[indexIK].ikLinkList[0].BoneIndex;
}
UpperLimbCSTransform = MeshBases.GetComponentSpaceTransform(UpperLimbIndex);
LowerLimbCSTransform = MeshBases.GetComponentSpaceTransform(LowerLimbIndex);
EndBoneCSTransform = MeshBases.GetComponentSpaceTransform(EndBoneIndex);
FTransform JointTargetTransform(JointTargetLocation);
FAnimationRuntime::ConvertBoneSpaceTransformToCS(SkelComp, MeshBases, JointTargetTransform, JointTargetSpaceBoneIndex, JointTargetLocationSpace);
const FVector RootPos = UpperLimbCSTransform.GetTranslation();
const FVector InitialJointPos = LowerLimbCSTransform.GetTranslation();
const FVector InitialEndPos = EndBoneCSTransform.GetTranslation();
FTransform EffectorTransform(EffectorLocation);
FAnimationRuntime::ConvertBoneSpaceTransformToCS(SkelComp, MeshBases, EffectorTransform, EffectorSpaceBoneIndex, EffectorLocationSpace);
FVector DesiredPos = EffectorTransform.GetTranslation();
FVector DesiredDelta = DesiredPos - RootPos;
float DesiredLength = DesiredDelta.Size();
// Check to handle case where DesiredPos is the same as RootPos.
FVector DesiredDir;
if (DesiredLength < (float)KINDA_SMALL_NUMBER)
{
DesiredLength = (float)KINDA_SMALL_NUMBER;
DesiredDir = FVector(1, 0, 0);
}
else
{
DesiredDir = DesiredDelta / DesiredLength;
}
FVector JointTargetPos = JointTargetTransform.GetTranslation();
FVector JointTargetDelta = JointTargetPos - RootPos;
float JointTargetLength = JointTargetDelta.Size();
// Same check as above, to cover case when JointTarget position is the same as RootPos.
FVector JointPlaneNormal, JointBendDir;
if (JointTargetLength < (float)KINDA_SMALL_NUMBER)
{
JointBendDir = FVector(0, 1, 0);
JointPlaneNormal = FVector(0, 0, 1);
}
else
{
JointPlaneNormal = DesiredDir ^ JointTargetDelta;
// If we are trying to point the limb in the same direction that we are supposed to displace the joint in,
// we have to just pick 2 random vector perp to DesiredDir and each other.
if (JointPlaneNormal.Size() < (float)KINDA_SMALL_NUMBER)
{
DesiredDir.FindBestAxisVectors(JointPlaneNormal, JointBendDir);
}
else
{
JointPlaneNormal.Normalize();
// Find the final member of the reference frame by removing any component of JointTargetDelta along DesiredDir.
// This should never leave a zero vector, because we've checked DesiredDir and JointTargetDelta are not parallel.
JointBendDir = JointTargetDelta - ((JointTargetDelta | DesiredDir) * DesiredDir);
JointBendDir.Normalize();
}
}
// Find lengths of upper and lower limb in the ref skeleton.
// Use actual sizes instead of ref skeleton, so we take into account translation and scaling from other bone controllers.
float LowerLimbLength = (InitialEndPos - InitialJointPos).Size();
float UpperLimbLength = (InitialJointPos - RootPos).Size();
float MaxLimbLength = LowerLimbLength + UpperLimbLength;
FVector OutEndPos = DesiredPos;
FVector OutJointPos = InitialJointPos;
// If we are trying to reach a goal beyond the length of the limb, clamp it to something solvable and extend limb fully.
if (DesiredLength > MaxLimbLength)
{
OutEndPos = RootPos + (MaxLimbLength * DesiredDir);
OutJointPos = RootPos + (UpperLimbLength * DesiredDir);
}
else
{
// So we have a triangle we know the side lengths of. We can work out the angle between DesiredDir and the direction of the upper limb
// using the sin rule:
const float TwoAB = 2.f * UpperLimbLength * DesiredLength;
const float CosAngle = (TwoAB != 0.f) ? ((UpperLimbLength*UpperLimbLength) + (DesiredLength*DesiredLength) - (LowerLimbLength*LowerLimbLength)) / TwoAB : 0.f;
// If CosAngle is less than 0, the upper arm actually points the opposite way to DesiredDir, so we handle that.
const bool bReverseUpperBone = (CosAngle < 0.f);
// If CosAngle is greater than 1.f, the triangle could not be made - we cannot reach the target.
// We just have the two limbs double back on themselves, and EndPos will not equal the desired EffectorLocation.
if ((CosAngle > 1.f) || (CosAngle < -1.f))
{
// Because we want the effector to be a positive distance down DesiredDir, we go back by the smaller section.
if (UpperLimbLength > LowerLimbLength)
{
OutJointPos = RootPos + (UpperLimbLength * DesiredDir);
OutEndPos = OutJointPos - (LowerLimbLength * DesiredDir);
}
else
{
OutJointPos = RootPos - (UpperLimbLength * DesiredDir);
OutEndPos = OutJointPos + (LowerLimbLength * DesiredDir);
}
}
else
{
// Angle between upper limb and DesiredDir
const float Angle = FMath::Acos(CosAngle);
// Now we calculate the distance of the joint from the root -> effector line.
// This forms a right-angle triangle, with the upper limb as the hypotenuse.
const float JointLineDist = UpperLimbLength * FMath::Sin(Angle);
// And the final side of that triangle - distance along DesiredDir of perpendicular.
// ProjJointDistSqr can't be neg, because JointLineDist must be <= UpperLimbLength because appSin(Angle) is <= 1.
const float ProjJointDistSqr = (UpperLimbLength*UpperLimbLength) - (JointLineDist*JointLineDist);
// although this shouldn't be ever negative, sometimes Xbox release produces -0.f, causing ProjJointDist to be NaN
// so now I branch it.
float ProjJointDist = (ProjJointDistSqr>0.f) ? FMath::Sqrt(ProjJointDistSqr) : 0.f;
if (bReverseUpperBone)
{
ProjJointDist *= -1.f;
}
// So now we can work out where to put the joint!
OutJointPos = RootPos + (ProjJointDist * DesiredDir) + (JointLineDist * JointBendDir);
}
}
// Update transform for upper bone.
{
// Get difference in direction for old and new joint orientations
FVector const OldDir = (InitialJointPos - RootPos).GetSafeNormal();
FVector const NewDir = (OutJointPos - RootPos).GetSafeNormal();
// Find Delta Rotation take takes us from Old to New dir
FQuat const DeltaRotation = FQuat::FindBetween(OldDir, NewDir);
// Rotate our Joint quaternion by this delta rotation
UpperLimbCSTransform.SetRotation(DeltaRotation * UpperLimbCSTransform.GetRotation());
// And put joint where it should be.
UpperLimbCSTransform.SetTranslation(RootPos);
// Order important. First bone is upper limb.
OutBoneTransforms.Add(FBoneTransform(UpperLimbIndex, UpperLimbCSTransform));
}
// Update transform for lower bone.
{
// Get difference in direction for old and new joint orientations
FVector const OldDir = (InitialEndPos - InitialJointPos).GetSafeNormal();
FVector const NewDir = (OutEndPos - OutJointPos).GetSafeNormal();
// Find Delta Rotation take takes us from Old to New dir
FQuat const DeltaRotation = FQuat::FindBetween(OldDir, NewDir);
// Rotate our Joint quaternion by this delta rotation
LowerLimbCSTransform.SetRotation(DeltaRotation * LowerLimbCSTransform.GetRotation());
// And put joint where it should be.
LowerLimbCSTransform.SetTranslation(OutJointPos);
// Order important. Second bone is lower limb.
OutBoneTransforms.Add(FBoneTransform(LowerLimbIndex, LowerLimbCSTransform));
}
// Update transform for end bone.
{
// Set correct location for end bone.
EndBoneCSTransform.SetTranslation(OutEndPos);
// Order important. Third bone is End Bone.
OutBoneTransforms.Add(FBoneTransform(EndBoneIndex, EndBoneCSTransform));
}
OutBoneTransforms.Sort([](const FBoneTransform& A, const FBoneTransform& B)
{
return A.BoneIndex < B.BoneIndex;
});
if (OutBoneTransforms.Num() > 0)
{
MeshBases.LocalBlendCSBoneTransforms(OutBoneTransforms, BlendWeight);
OutBoneTransforms.Empty();
}
}
}
}