int _set_gdma_ch(unsigned long dst,
unsigned long src, unsigned int len, int burst_size,
int soft_mode, int src_req_type, int dst_req_type,
int src_burst_mode, int dst_burst_mode)
{
unsigned long data;
//src
GDMA_WRITE_REG(GDMA_SRC_REG(DMA_CHNUM), (src & 0x1fffffff));
//dst
GDMA_WRITE_REG(GDMA_DST_REG(DMA_CHNUM), (dst & 0x1fffffff));
//control 1,
data = 0;
// data = (0 << CH_UNMASK_INTEBL_OFFSET);
data |= ( DMA_CHNUM << NEXT_UNMASK_CH_OFFSET);
data |= ( (soft_mode == 0) << CH_MASK_OFFSET);
#if 0
#if defined (CONFIG_RALINK_RT3883) || defined (CONFIG_RALINK_RT3352)
data |= (src_req_type << SRC_DMA_REQ_OFFSET);
data |= (dst_req_type << DST_DMA_REQ_OFFSET);
#endif
#endif
// frank added
data |= (src_req_type << SRC_DMA_REQ_OFFSET);
data |= (dst_req_type << DST_DMA_REQ_OFFSET);
GDMA_WRITE_REG(GDMA_CTRL_REG1(DMA_CHNUM), data);
// control
data = (len << TRANS_CNT_OFFSET);
#if 0
#ifdef CONFIG_RALINK_RT3052
data |= (src_req_type << SRC_DMA_REQ_OFFSET);
data |= (dst_req_type << DST_DMA_REQ_OFFSET);
#endif
#endif
data |= (src_burst_mode << SRC_BRST_MODE_OFFSET);
data |= (dst_burst_mode << DST_BRST_MODE_OFFSET);
data |= (burst_size << BRST_SIZE_OFFSET);
// data |= (0 << INT_EBL_OFFSET);
data |= ((soft_mode != 0) << MODE_SEL_OFFSET);
data |= (0x01<<CH_EBL_OFFSET);
GDMA_WRITE_REG(GDMA_CTRL_REG(DMA_CHNUM), data);
return 1;
}
int _GdmaReqEntryIns(GdmaReqEntry *NewEntry)
{
uint32_t Data=0;
GDMA_PRINT("== << GDMA Control Reg (Channel=%d) >> ===\n", NewEntry->ChNum);
GDMA_PRINT(" Channel Source Addr = %x \n", NewEntry->Src);
GDMA_PRINT(" Channel Dest Addr = %x \n", NewEntry->Dst);
GDMA_PRINT(" Transfer Count=%d\n", NewEntry->TransCount);
GDMA_PRINT(" Source DMA Req= DMA_REQ%d\n", NewEntry->SrcReqNum);
GDMA_PRINT(" Dest DMA Req= DMA_REQ%d\n", NewEntry->DstReqNum);
GDMA_PRINT(" Source Burst Mode=%s\n", NewEntry->SrcBurstMode ? "Fix" : "Inc");
GDMA_PRINT(" Dest Burst Mode=%s\n", NewEntry->DstBurstMode ? "Fix" : "Inc");
GDMA_PRINT(" Burst Size=%s\n", NewEntry->BurstSize ==0 ? "1 transfer" : \
NewEntry->BurstSize ==1 ? "2 transfer" :\
NewEntry->BurstSize ==2 ? "4 transfer" :\
NewEntry->BurstSize ==3 ? "8 transfer" :\
NewEntry->BurstSize ==4 ? "16 transfer" :\
"Error");
GDMA_PRINT(" Hardware/Software Mode = %s\n", NewEntry->SoftMode ?
"Soft" : "Hw");
GDMA_PRINT("== << GDMA Control Reg1 (Channel=%d) >> =\n", NewEntry->ChNum);
GDMA_PRINT("Channel Done Interrput=%s\n", (NewEntry->DoneIntCallback!=NULL) ?
"Enable" : "Disable");
GDMA_PRINT("Channel Unmasked Int=%s\n", (NewEntry->UnMaskIntCallback!=NULL) ?
"Enable" : "Disable");
#if !defined (CONFIG_RALINK_RT3052) && !defined (CONFIG_RALINK_RT3883)
GDMA_PRINT("Coherent Interrupt =%s\n", (NewEntry->CoherentIntEbl==1)?
"Enable" : "Disable");
#endif
GDMA_PRINT("Next Unmasked Channel=%d\n", NewEntry->NextUnMaskCh);
GDMA_PRINT("Channel Mask=%d\n", NewEntry->ChMask);
GDMA_PRINT("========================================\n");
GDMA_WRITE_REG(GDMA_SRC_REG(NewEntry->ChNum), NewEntry->Src);
GDMA_PRINT("SrcAddr: Write %0X to %X\n", \
NewEntry->Src, GDMA_SRC_REG(NewEntry->ChNum));
GDMA_WRITE_REG(GDMA_DST_REG(NewEntry->ChNum), NewEntry->Dst);
GDMA_PRINT("DstAddr: Write %0X to %X\n", \
NewEntry->Dst, GDMA_DST_REG(NewEntry->ChNum));
Data |= ( (NewEntry->NextUnMaskCh) << NEXT_UNMASK_CH_OFFSET);
Data |= ( NewEntry->ChMask << CH_MASK_OFFSET);
#if !defined (CONFIG_RALINK_RT3052) && !defined (CONFIG_RALINK_RT3883)
Data |= ( NewEntry->CoherentIntEbl << COHERENT_INT_EBL_OFFSET);
#endif
if(NewEntry->UnMaskIntCallback!=NULL) {
Data |= (0x01<<CH_UNMASKINT_EBL_OFFSET);
GdmaUnMaskIntCallback[NewEntry->ChNum] = NewEntry->UnMaskIntCallback;
}
#if defined (CONFIG_RALINK_RT3883) || defined (CONFIG_RALINK_RT3352) || defined (CONFIG_RALINK_RT5350)
Data |= (NewEntry->SrcReqNum << SRC_DMA_REQ_OFFSET);
Data |= (NewEntry->DstReqNum << DST_DMA_REQ_OFFSET);
#endif
GDMA_WRITE_REG(GDMA_CTRL_REG1(NewEntry->ChNum), Data);
GDMA_PRINT("CTRL1: Write %08X to %8X\n", Data, GDMA_CTRL_REG1(NewEntry->ChNum));
Data = ((NewEntry->TransCount) << TRANS_CNT_OFFSET);
#if defined (CONFIG_RALINK_RT3052)
Data |= (NewEntry->SrcReqNum << SRC_DMA_REQ_OFFSET);
Data |= (NewEntry->DstReqNum << DST_DMA_REQ_OFFSET);
#endif
Data |= (NewEntry->SrcBurstMode << SRC_BRST_MODE_OFFSET);
Data |= (NewEntry->DstBurstMode << DST_BRST_MODE_OFFSET);
Data |= (NewEntry->BurstSize << BRST_SIZE_OFFSET);
if(NewEntry->DoneIntCallback!=NULL) {
Data |= (0x01<<CH_DONEINT_EBL_OFFSET);
GdmaDoneIntCallback[NewEntry->ChNum] = NewEntry->DoneIntCallback;
}
if(NewEntry->SoftMode) {
Data |= (0x01<<MODE_SEL_OFFSET);
}
Data |= (0x01<<CH_EBL_OFFSET);
GDMA_WRITE_REG(GDMA_CTRL_REG(NewEntry->ChNum), Data);
GDMA_PRINT("CTRL: Write %08X to %8X\n", Data, GDMA_CTRL_REG(NewEntry->ChNum));
//if there is no interrupt handler, this function will
//return 1 until GDMA done.
if(NewEntry->DoneIntCallback==NULL) {
//wait for GDMA processing done
#if defined (CONFIG_RALINK_RT3052)
while((GDMA_READ_REG(RALINK_GDMAISTS) &
(0x1<<NewEntry->ChNum))==0);
//write 1 clear
GDMA_WRITE_REG(RALINK_GDMAISTS, 1<< NewEntry->ChNum);
#elif defined (CONFIG_RALINK_RT3883) || defined (CONFIG_RALINK_RT3352) || defined (CONFIG_RALINK_RT5350)
while((GDMA_READ_REG(RALINK_GDMA_DONEINT) &
(0x1<<NewEntry->ChNum))==0);
//write 1 clear
GDMA_WRITE_REG(RALINK_GDMA_DONEINT, 1<< NewEntry->ChNum);
#endif
}
return 1;
}
