void SCH_BUS_ENTRY_BASE::Draw( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aOffset,
GR_DRAWMODE aDrawMode, COLOR4D aColor )
{
COLOR4D color;
EDA_RECT* clipbox = aPanel->GetClipBox();
if( aColor != COLOR4D::UNSPECIFIED )
color = aColor;
else
color = GetLayerColor( GetState( BRIGHTENED ) ? LAYER_BRIGHTENED : m_Layer );
GRSetDrawMode( aDC, aDrawMode );
GRLine( clipbox, aDC, m_pos.x + aOffset.x, m_pos.y + aOffset.y,
m_End().x + aOffset.x, m_End().y + aOffset.y, GetPenSize(), color );
// Draw pin targets if part is being dragged
bool dragging = aPanel->GetScreen()->GetCurItem() == this && aPanel->IsMouseCaptured();
if( m_isDanglingStart || dragging )
{
GRCircle( clipbox, aDC, m_pos.x + aOffset.x, m_pos.y + aOffset.y,
TARGET_BUSENTRY_RADIUS, 0, color );
}
if( m_isDanglingEnd || dragging )
{
GRCircle( clipbox, aDC, m_End().x + aOffset.x, m_End().y + aOffset.y,
TARGET_BUSENTRY_RADIUS, 0, color );
}
}
/* Draw PCB_TARGET object: 2 segments + 1 circle
* The circle radius is half the radius of the target
* 2 lines have length the diameter of the target
*/
void PCB_TARGET::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE mode_color,
const wxPoint& offset )
{
int radius, ox, oy, width;
int dx1, dx2, dy1, dy2;
ox = m_Pos.x + offset.x;
oy = m_Pos.y + offset.y;
BOARD * brd = GetBoard( );
if( brd->IsLayerVisible( m_Layer ) == false )
return;
auto frame = static_cast<PCB_EDIT_FRAME*> ( panel->GetParent() );
auto gcolor = frame->Settings().Colors().GetLayerColor( m_Layer );
GRSetDrawMode( DC, mode_color );
auto displ_opts = (PCB_DISPLAY_OPTIONS*)( panel->GetDisplayOptions() );
bool filled = displ_opts ? displ_opts->m_DisplayDrawItemsFill : FILLED;
width = m_Width;
radius = m_Size / 3;
if( GetShape() ) // shape X
radius = m_Size / 2;
if( filled )
GRCircle( panel->GetClipBox(), DC, ox, oy, radius, width, gcolor );
else
{
GRCircle( panel->GetClipBox(), DC, ox, oy, radius + (width / 2), gcolor );
GRCircle( panel->GetClipBox(), DC, ox, oy, radius - (width / 2), gcolor );
}
radius = m_Size / 2;
dx1 = radius;
dy1 = 0;
dx2 = 0;
dy2 = radius;
if( GetShape() ) // shape X
{
dx1 = dy1 = radius;
dx2 = dx1;
dy2 = -dy1;
}
if( filled )
{
GRLine( panel->GetClipBox(), DC, ox - dx1, oy - dy1, ox + dx1, oy + dy1, width, gcolor );
GRLine( panel->GetClipBox(), DC, ox - dx2, oy - dy2, ox + dx2, oy + dy2, width, gcolor );
}
else
{
GRCSegm( panel->GetClipBox(), DC, ox - dx1, oy - dy1, ox + dx1, oy + dy1, width, gcolor );
GRCSegm( panel->GetClipBox(), DC, ox - dx2, oy - dy2, ox + dx2, oy + dy2, width, gcolor );
}
}
void EDA_DRAW_PANEL::DrawGridAxis( wxDC* aDC, GR_DRAWMODE aDrawMode, const wxPoint& aGridOrigin )
{
if( !GetParent()->GetShowGridAxis() || ( !aGridOrigin.x && !aGridOrigin.y ) )
return;
COLOR4D color = GetParent()->GetGridColor();
GRSetDrawMode( aDC, aDrawMode );
#if DRAW_AXIS_AS_LINES
wxSize pageSize = GetParent()->GetPageSizeIU();
// Draw the Y axis
GRLine( &m_ClipBox, aDC, aGridOrigin.x, -pageSize.y,
aGridOrigin.x, pageSize.y, 0, color );
// Draw the X axis
GRLine( &m_ClipBox, aDC, -pageSize.x, aGridOrigin.y,
pageSize.x, aGridOrigin.y, 0, color );
#else
int radius = aDC->DeviceToLogicalXRel( AXIS_SIZE_IN_PIXELS );
int linewidth = aDC->DeviceToLogicalXRel( 1 );
GRSetColorPen( aDC, GetParent()->GetGridColor(), linewidth );
GRLine( &m_ClipBox, aDC, aGridOrigin.x-radius, aGridOrigin.y-radius,
aGridOrigin.x+radius, aGridOrigin.y+radius, 0, color );
// Draw the X shape
GRLine( &m_ClipBox, aDC, aGridOrigin.x+radius, aGridOrigin.y-radius,
aGridOrigin.x-radius, aGridOrigin.y+radius, 0, color );
GRCircle( &m_ClipBox, aDC, aGridOrigin, radius, linewidth, color );
#endif
}
void LIB_CIRCLE::drawGraphic( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aOffset,
void* aData, const TRANSFORM& aTransform )
{
wxPoint pos1 = aTransform.TransformCoordinate( m_Pos ) + aOffset;
COLOR4D color = GetLayerColor( LAYER_DEVICE );
COLOR4D bgColor = GetLayerColor( LAYER_DEVICE_BACKGROUND );
FILL_T fill = aData ? NO_FILL : m_Fill;
EDA_RECT* const clipbox = aPanel? aPanel->GetClipBox() : NULL;
if( fill == FILLED_WITH_BG_BODYCOLOR )
GRFilledCircle( clipbox, aDC, pos1.x, pos1.y, m_Radius, GetPenSize(), bgColor, bgColor );
else if( fill == FILLED_SHAPE )
GRFilledCircle( clipbox, aDC, pos1.x, pos1.y, m_Radius, 0, color, color );
else
GRCircle( clipbox, aDC, pos1.x, pos1.y, m_Radius, GetPenSize(), color );
}
void LIB_CIRCLE::drawGraphic( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aOffset,
COLOR4D aColor, GR_DRAWMODE aDrawMode, void* aData,
const TRANSFORM& aTransform )
{
wxPoint pos1;
COLOR4D color = GetLayerColor( LAYER_DEVICE );
if( aColor == COLOR4D::UNSPECIFIED ) // Used normal color or selected color
{
if( IsSelected() )
color = GetItemSelectedColor();
}
else
{
color = aColor;
}
pos1 = aTransform.TransformCoordinate( m_Pos ) + aOffset;
GRSetDrawMode( aDC, aDrawMode );
FILL_T fill = aData ? NO_FILL : m_Fill;
if( aColor != COLOR4D::UNSPECIFIED )
fill = NO_FILL;
EDA_RECT* const clipbox = aPanel? aPanel->GetClipBox() : NULL;
if( fill == FILLED_WITH_BG_BODYCOLOR )
GRFilledCircle( clipbox, aDC, pos1.x, pos1.y, m_Radius, GetPenSize(),
(m_Flags & IS_MOVED) ? color : GetLayerColor( LAYER_DEVICE_BACKGROUND ),
GetLayerColor( LAYER_DEVICE_BACKGROUND ) );
else if( fill == FILLED_SHAPE )
GRFilledCircle( clipbox, aDC, pos1.x, pos1.y, m_Radius, 0, color, color );
else
GRCircle( clipbox, aDC, pos1.x, pos1.y, m_Radius, GetPenSize(), color );
/* Set to one (1) to draw bounding box around circle to validate bounding
* box calculation. */
#if 0
EDA_RECT bBox = GetBoundingBox();
bBox.RevertYAxis();
bBox = aTransform.TransformCoordinate( bBox );
bBox.Move( aOffset );
GRRect( clipbox, aDC, bBox, 0, LIGHTMAGENTA );
#endif
}
void LIB_CIRCLE::drawGraphic( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aOffset,
int aColor, int aDrawMode, void* aData, const TRANSFORM& aTransform )
{
wxPoint pos1;
int color = ReturnLayerColor( LAYER_DEVICE );
if( aColor < 0 ) // Used normal color or selected color
{
if( IsSelected() )
color = g_ItemSelectetColor;
}
else
{
color = aColor;
}
pos1 = aTransform.TransformCoordinate( m_Pos ) + aOffset;
GRSetDrawMode( aDC, aDrawMode );
FILL_T fill = aData ? NO_FILL : m_Fill;
if( aColor >= 0 )
fill = NO_FILL;
if( fill == FILLED_WITH_BG_BODYCOLOR )
GRFilledCircle( aPanel->GetClipBox(), aDC, pos1.x, pos1.y, m_Radius, GetPenSize(),
(m_Flags & IS_MOVED) ? color : ReturnLayerColor( LAYER_DEVICE_BACKGROUND ),
ReturnLayerColor( LAYER_DEVICE_BACKGROUND ) );
else if( fill == FILLED_SHAPE )
GRFilledCircle( aPanel->GetClipBox(), aDC, pos1.x, pos1.y, m_Radius, 0, color, color );
else
GRCircle( aPanel->GetClipBox(), aDC, pos1.x, pos1.y, m_Radius, GetPenSize(), color );
/* Set to one (1) to draw bounding box around circle to validate bounding
* box calculation. */
#if 0
EDA_RECT bBox = GetBoundingBox();
GRRect( aPanel->GetClipBox(), aDC, bBox.GetOrigin().x, bBox.GetOrigin().y,
bBox.GetEnd().x, bBox.GetEnd().y, 0, LIGHTMAGENTA );
#endif
}
void EDA_DRAW_PANEL::DrawAuxiliaryAxis( wxDC* aDC, GR_DRAWMODE aDrawMode )
{
wxPoint origin = GetParent()->GetAuxOrigin();
if( origin == wxPoint( 0, 0 ) )
return;
COLOR4D color = COLOR4D( RED );
GRSetDrawMode( aDC, aDrawMode );
#if DRAW_AXIS_AS_LINES
wxSize pageSize = GetParent()->GetPageSizeIU();
// Draw the Y axis
GRLine( &m_ClipBox, aDC, origin.x, -pageSize.y,
origin.x, pageSize.y, 0, color );
// Draw the X axis
GRLine( &m_ClipBox, aDC, -pageSize.x, origin.y,
pageSize.x, origin.y, 0, color );
#else
int radius = aDC->DeviceToLogicalXRel( AXIS_SIZE_IN_PIXELS );
int linewidth = aDC->DeviceToLogicalXRel( 1 );
GRSetColorPen( aDC, color, linewidth );
GRLine( &m_ClipBox, aDC, origin.x, origin.y-radius,
origin.x, origin.y+radius, 0, color );
// Draw the + shape
GRLine( &m_ClipBox, aDC, origin.x-radius, origin.y,
origin.x+radius, origin.y, 0, color );
GRCircle( &m_ClipBox, aDC, origin, radius, linewidth, color );
#endif
}
/**
* Function DrawBasicShape
* Draw the primitive shape for flashed items.
*/
void AM_PRIMITIVE::DrawBasicShape( GERBER_DRAW_ITEM* aParent,
EDA_RECT* aClipBox,
wxDC* aDC,
EDA_COLOR_T aColor, EDA_COLOR_T aAltColor,
wxPoint aShapePos,
bool aFilledShape )
{
static std::vector<wxPoint> polybuffer; // create a static buffer to avoid a lot of memory reallocation
polybuffer.clear();
wxPoint curPos = aShapePos;
D_CODE* tool = aParent->GetDcodeDescr();
double rotation;
if( mapExposure( aParent ) == false )
{
EXCHG(aColor, aAltColor);
}
switch( primitive_id )
{
case AMP_CIRCLE: // Circle, given diameter and position
{
/* Generated by an aperture macro declaration like:
* "1,1,0.3,0.5, 1.0*"
* type (1), exposure, diameter, pos.x, pos.y
* type is not stored in parameters list, so the first parameter is exposure
*/
curPos += mapPt( params[2].GetValue( tool ), params[3].GetValue( tool ), m_GerbMetric );
curPos = aParent->GetABPosition( curPos );
int radius = scaletoIU( params[1].GetValue( tool ), m_GerbMetric ) / 2;
if( !aFilledShape )
GRCircle( aClipBox, aDC, curPos, radius, 0, aColor );
else
GRFilledCircle( aClipBox, aDC, curPos, radius, aColor );
}
break;
case AMP_LINE2:
case AMP_LINE20: // Line with rectangle ends. (Width, start and end pos + rotation)
{
/* Generated by an aperture macro declaration like:
* "2,1,0.3,0,0, 0.5, 1.0,-135*"
* type (2), exposure, width, start.x, start.y, end.x, end.y, rotation
* type is not stored in parameters list, so the first parameter is exposure
*/
ConvertShapeToPolygon( aParent, polybuffer );
// shape rotation:
rotation = params[6].GetValue( tool ) * 10.0;
if( rotation != 0)
{
for( unsigned ii = 0; ii < polybuffer.size(); ii++ )
RotatePoint( &polybuffer[ii], -rotation );
}
// Move to current position:
for( unsigned ii = 0; ii < polybuffer.size(); ii++ )
{
polybuffer[ii] += curPos;
polybuffer[ii] = aParent->GetABPosition( polybuffer[ii] );
}
GRClosedPoly( aClipBox, aDC,
polybuffer.size(), &polybuffer[0], aFilledShape, aColor, aColor );
}
break;
case AMP_LINE_CENTER:
{
/* Generated by an aperture macro declaration like:
* "21,1,0.3,0.03,0,0,-135*"
* type (21), exposure, ,width, height, center pos.x, center pos.y, rotation
* type is not stored in parameters list, so the first parameter is exposure
*/
ConvertShapeToPolygon( aParent, polybuffer );
// shape rotation:
rotation = params[5].GetValue( tool ) * 10.0;
if( rotation != 0 )
{
for( unsigned ii = 0; ii < polybuffer.size(); ii++ )
RotatePoint( &polybuffer[ii], -rotation );
}
// Move to current position:
for( unsigned ii = 0; ii < polybuffer.size(); ii++ )
{
polybuffer[ii] += curPos;
polybuffer[ii] = aParent->GetABPosition( polybuffer[ii] );
}
GRClosedPoly( aClipBox, aDC,
polybuffer.size(), &polybuffer[0], aFilledShape, aColor, aColor );
}
break;
case AMP_LINE_LOWER_LEFT:
{
/* Generated by an aperture macro declaration like:
* "22,1,0.3,0.03,0,0,-135*"
* type (22), exposure, ,width, height, corner pos.x, corner pos.y, rotation
* type is not stored in parameters list, so the first parameter is exposure
*/
ConvertShapeToPolygon( aParent, polybuffer );
// shape rotation:
rotation = params[5].GetValue( tool ) * 10.0;
if( rotation != 0)
{
for( unsigned ii = 0; ii < polybuffer.size(); ii++ )
RotatePoint( &polybuffer[ii], -rotation );
}
// Move to current position:
for( unsigned ii = 0; ii < polybuffer.size(); ii++ )
{
polybuffer[ii] += curPos;
polybuffer[ii] = aParent->GetABPosition( polybuffer[ii] );
}
GRClosedPoly( aClipBox, aDC,
polybuffer.size(), &polybuffer[0], aFilledShape, aColor, aColor );
}
break;
case AMP_THERMAL:
{
/* Generated by an aperture macro declaration like:
* "7, 0,0,1.0,0.3,0.01,-13*"
* type (7), center.x , center.y, outside diam, inside diam, crosshair thickness, rotation
* type is not stored in parameters list, so the first parameter is center.x
*/
curPos += mapPt( params[0].GetValue( tool ), params[1].GetValue( tool ), m_GerbMetric );
ConvertShapeToPolygon( aParent, polybuffer );
// shape rotation:
rotation = params[5].GetValue( tool ) * 10.0;
// Because a thermal shape has 4 identical sub-shapes, only one is created in polybuffer.
// We must draw 4 sub-shapes rotated by 90 deg
std::vector<wxPoint> subshape_poly;
for( int ii = 0; ii < 4; ii++ )
{
subshape_poly = polybuffer;
double sub_rotation = rotation + 900 * ii;
for( unsigned jj = 0; jj < subshape_poly.size(); jj++ )
RotatePoint( &subshape_poly[jj], -sub_rotation );
// Move to current position:
for( unsigned jj = 0; jj < subshape_poly.size(); jj++ )
{
subshape_poly[jj] += curPos;
subshape_poly[jj] = aParent->GetABPosition( subshape_poly[jj] );
}
GRClosedPoly( aClipBox, aDC,
subshape_poly.size(), &subshape_poly[0], true, aAltColor,
aAltColor );
}
}
break;
case AMP_MOIRE: // A cross hair with n concentric circles
{
curPos += mapPt( params[0].GetValue( tool ), params[1].GetValue( tool ),
m_GerbMetric );
/* Generated by an aperture macro declaration like:
* "6,0,0,0.125,.01,0.01,3,0.003,0.150,0"
* type(6), pos.x, pos.y, diam, penwidth, gap, circlecount, crosshair thickness, crosshaire len, rotation
* type is not stored in parameters list, so the first parameter is pos.x
*/
int outerDiam = scaletoIU( params[2].GetValue( tool ), m_GerbMetric );
int penThickness = scaletoIU( params[3].GetValue( tool ), m_GerbMetric );
int gap = scaletoIU( params[4].GetValue( tool ), m_GerbMetric );
int numCircles = KiROUND( params[5].GetValue( tool ) );
// Draw circles:
wxPoint center = aParent->GetABPosition( curPos );
// adjust outerDiam by this on each nested circle
int diamAdjust = (gap + penThickness); //*2; //Should we use * 2 ?
for( int i = 0; i < numCircles; ++i, outerDiam -= diamAdjust )
{
if( outerDiam <= 0 )
break;
if( !aFilledShape )
{
// draw the border of the pen's path using two circles, each as narrow as possible
GRCircle( aClipBox, aDC, center, outerDiam / 2, 0, aColor );
GRCircle( aClipBox, aDC, center, outerDiam / 2 - penThickness, 0, aColor );
}
else // Filled mode
{
GRCircle( aClipBox, aDC, center,
(outerDiam - penThickness) / 2, penThickness, aColor );
}
}
// Draw the cross:
ConvertShapeToPolygon( aParent, polybuffer );
rotation = params[8].GetValue( tool ) * 10.0;
for( unsigned ii = 0; ii < polybuffer.size(); ii++ )
{
// shape rotation:
RotatePoint( &polybuffer[ii], -rotation );
// Move to current position:
polybuffer[ii] += curPos;
polybuffer[ii] = aParent->GetABPosition( polybuffer[ii] );
}
GRClosedPoly( aClipBox, aDC,
polybuffer.size(), &polybuffer[0], aFilledShape, aColor, aColor );
}
break;
case AMP_OUTLINE:
{
/* Generated by an aperture macro declaration like:
* "4,1,3,0.0,0.0,0.0,0.5,0.5,0.5,0.5,0.0,-25"
* type(4), exposure, corners count, corner1.x, corner.1y, ..., rotation
* type is not stored in parameters list, so the first parameter is exposure
*/
int numPoints = (int) params[1].GetValue( tool );
rotation = params[numPoints * 2 + 4].GetValue( tool ) * 10.0;
wxPoint pos;
// Read points. numPoints does not include the starting point, so add 1.
for( int i = 0; i<numPoints + 1; ++i )
{
int jj = i * 2 + 2;
pos.x = scaletoIU( params[jj].GetValue( tool ), m_GerbMetric );
pos.y = scaletoIU( params[jj + 1].GetValue( tool ), m_GerbMetric );
polybuffer.push_back(pos);
}
// rotate polygon and move it to the actual position
// shape rotation:
for( unsigned ii = 0; ii < polybuffer.size(); ii++ )
{
RotatePoint( &polybuffer[ii], -rotation );
}
// Move to current position:
for( unsigned ii = 0; ii < polybuffer.size(); ii++ )
{
polybuffer[ii] += curPos;
polybuffer[ii] = aParent->GetABPosition( polybuffer[ii] );
}
GRClosedPoly( aClipBox, aDC,
polybuffer.size(), &polybuffer[0], aFilledShape, aColor, aColor );
}
break;
case AMP_POLYGON: // Is a regular polygon
/* Generated by an aperture macro declaration like:
* "5,1,0.6,0,0,0.5,25"
* type(5), exposure, vertices count, pox.x, pos.y, diameter, rotation
* type is not stored in parameters list, so the first parameter is exposure
*/
curPos += mapPt( params[2].GetValue( tool ), params[3].GetValue( tool ), m_GerbMetric );
// Creates the shape:
ConvertShapeToPolygon( aParent, polybuffer );
// rotate polygon and move it to the actual position
rotation = params[5].GetValue( tool ) * 10.0;
for( unsigned ii = 0; ii < polybuffer.size(); ii++ )
{
RotatePoint( &polybuffer[ii], -rotation );
polybuffer[ii] += curPos;
polybuffer[ii] = aParent->GetABPosition( polybuffer[ii] );
}
GRClosedPoly( aClipBox, aDC,
polybuffer.size(), &polybuffer[0], aFilledShape, aColor, aColor );
break;
case AMP_EOF:
// not yet supported, waiting for you.
break;
case AMP_UNKNOWN:
default:
DBG( printf( "AM_PRIMITIVE::DrawBasicShape() err: unknown prim id %d\n",primitive_id) );
break;
}
}
void EDGE_MODULE::Draw(WinEDA_DrawPanel * panel, wxDC * DC,
const wxPoint & offset, int draw_mode)
/********************************************************************************/
/* Affichage d'un segment contour de module :
Entree : ox, oy = offset de trace
draw_mode = mode de trace ( GR_OR, GR_XOR, GR_AND)
Les contours sont de differents type:
- Segment
- Cercles
- Arcs
*/
{
int ux0, uy0, dx, dy,rayon, StAngle, EndAngle;
int color , type_trace;
int zoom;
int typeaff;
PCB_SCREEN * screen;
WinEDA_BasePcbFrame * frame;
MODULE * Module = NULL;
if ( m_Parent && (m_Parent->m_StructType == TYPEMODULE) )
Module = (MODULE*) m_Parent;
GRSetDrawMode(DC, draw_mode);
color = g_DesignSettings.m_LayerColor[m_Layer];
if ( panel ) screen = (PCB_SCREEN *) panel->m_Parent->m_CurrentScreen;
else screen = ActiveScreen;
frame = screen->GetParentPcbFrame();
zoom = screen->GetZoom();
type_trace = m_Shape;
ux0 = m_Start.x - offset.x; uy0 = m_Start.y - offset.y;
dx = m_End.x - offset.x ;
dy = m_End.y - offset.y ;
typeaff = frame->m_DisplayModEdge;
if( m_Layer <= CMP_N )
typeaff = frame->m_DisplayPcbTrackFill;
if( (m_Width /zoom) < L_MIN_DESSIN ) typeaff = FILAIRE;
switch (type_trace )
{
case S_SEGMENT:
if( typeaff == FILAIRE)
GRLine(&panel->m_ClipBox, DC, ux0, uy0, dx, dy, color);
else Affiche_1_Segment(panel, DC, ux0,uy0,dx,dy,m_Width,
typeaff,color);
break ;
case S_CIRCLE:
rayon = (int)hypot((double)(dx-ux0),(double)(dy-uy0) );
if( typeaff == FILAIRE)
{
GRCircle(&panel->m_ClipBox, DC, ux0, uy0, rayon, color) ;
}
else
{
if(typeaff == FILLED )
{
GRCircle(&panel->m_ClipBox, DC, ux0, uy0, rayon, m_Width, color);
}
else
{
GRCircle(&panel->m_ClipBox, DC, ux0, uy0, rayon + (m_Width/2), color) ;
GRCircle(&panel->m_ClipBox, DC, ux0, uy0, rayon - (m_Width/2), color) ;
}
}
break;
case S_ARC:
rayon = (int)hypot((double)(dx-ux0),(double)(dy-uy0) );
StAngle = (int)ArcTangente( dy-uy0, dx-ux0 );
EndAngle = StAngle + m_Angle;
if ( StAngle > EndAngle) EXCHG (StAngle, EndAngle);
if( typeaff == FILAIRE)
{
GRArc(&panel->m_ClipBox, DC, ux0, uy0, StAngle, EndAngle, rayon, color) ;
}
else if(typeaff == FILLED )
{
GRArc(&panel->m_ClipBox, DC, ux0, uy0, StAngle, EndAngle, rayon,
m_Width, color);
}
else
{
GRArc(&panel->m_ClipBox, DC, ux0, uy0, StAngle, EndAngle,
rayon + (m_Width/2), color) ;
GRArc(&panel->m_ClipBox, DC, ux0, uy0, StAngle, EndAngle,
rayon - (m_Width/2), color) ;
}
break;
case S_POLYGON:
{
// We must compute true coordinates from m_PolyList
// which are relative to module position, orientation 0
int ii, * source, * ptr, * ptr_base;
ptr = ptr_base = (int*) MyMalloc( 2 * m_PolyCount * sizeof(int) );
source = m_PolyList;
for (ii = 0; ii < m_PolyCount; ii++ )
{
int x, y;
x = *source; source++; y = *source; source++;
if ( Module )
{
RotatePoint (&x, &y, Module->m_Orient);
x += Module->m_Pos.x;
y += Module->m_Pos.y;
}
x += m_Start0.x - offset.x;
y += m_Start0.y - offset.y;
*ptr = x; ptr++; *ptr = y; ptr++;
}
GRPoly(&panel->m_ClipBox, DC, m_PolyCount, ptr_base,
TRUE, color, color);
free ( ptr_base);
break;
}
}
}
void D_CODE::DrawFlashedShape( GERBER_DRAW_ITEM* aParent,
EDA_RECT* aClipBox, wxDC* aDC, COLOR4D aColor,
wxPoint aShapePos, bool aFilledShape )
{
int radius;
switch( m_Shape )
{
case APT_MACRO:
GetMacro()->DrawApertureMacroShape( aParent, aClipBox, aDC, aColor,
aShapePos, aFilledShape);
break;
case APT_CIRCLE:
radius = m_Size.x >> 1;
if( !aFilledShape )
GRCircle( aClipBox, aDC, aParent->GetABPosition(aShapePos), radius, 0, aColor );
else
if( m_DrillShape == APT_DEF_NO_HOLE )
{
GRFilledCircle( aClipBox, aDC, aParent->GetABPosition(aShapePos),
radius, aColor );
}
else if( m_DrillShape == APT_DEF_ROUND_HOLE ) // round hole in shape
{
int width = (m_Size.x - m_Drill.x ) / 2;
GRCircle( aClipBox, aDC, aParent->GetABPosition(aShapePos),
radius - (width / 2), width, aColor );
}
else // rectangular hole
{
if( m_Polygon.OutlineCount() == 0 )
ConvertShapeToPolygon();
DrawFlashedPolygon( aParent, aClipBox, aDC, aColor, aFilledShape, aShapePos );
}
break;
case APT_RECT:
{
wxPoint start;
start.x = aShapePos.x - m_Size.x / 2;
start.y = aShapePos.y - m_Size.y / 2;
wxPoint end = start + m_Size;
start = aParent->GetABPosition( start );
end = aParent->GetABPosition( end );
if( !aFilledShape )
{
GRRect( aClipBox, aDC, start.x, start.y, end.x, end.y, 0, aColor );
}
else if( m_DrillShape == APT_DEF_NO_HOLE )
{
GRFilledRect( aClipBox, aDC, start.x, start.y, end.x, end.y, 0, aColor, aColor );
}
else
{
if( m_Polygon.OutlineCount() == 0 )
ConvertShapeToPolygon();
DrawFlashedPolygon( aParent, aClipBox, aDC, aColor, aFilledShape, aShapePos );
}
}
break;
case APT_OVAL:
{
wxPoint start = aShapePos;
wxPoint end = aShapePos;
if( m_Size.x > m_Size.y ) // horizontal oval
{
int delta = (m_Size.x - m_Size.y) / 2;
start.x -= delta;
end.x += delta;
radius = m_Size.y;
}
else // horizontal oval
{
int delta = (m_Size.y - m_Size.x) / 2;
start.y -= delta;
end.y += delta;
radius = m_Size.x;
}
start = aParent->GetABPosition( start );
end = aParent->GetABPosition( end );
if( !aFilledShape )
{
GRCSegm( aClipBox, aDC, start.x, start.y, end.x, end.y, radius, aColor );
}
else if( m_DrillShape == APT_DEF_NO_HOLE )
{
GRFillCSegm( aClipBox, aDC, start.x, start.y, end.x, end.y, radius, aColor );
}
else
{
if( m_Polygon.OutlineCount() == 0 )
ConvertShapeToPolygon();
DrawFlashedPolygon( aParent, aClipBox, aDC, aColor, aFilledShape, aShapePos );
}
}
break;
case APT_POLYGON:
if( m_Polygon.OutlineCount() == 0 )
ConvertShapeToPolygon();
DrawFlashedPolygon( aParent, aClipBox, aDC, aColor, aFilledShape, aShapePos );
break;
}
}
void EDGE_MODULE::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE draw_mode,
const wxPoint& offset )
{
int ux0, uy0, dx, dy, radius, StAngle, EndAngle;
PCB_LAYER_ID curr_layer = ( (PCB_SCREEN*) panel->GetScreen() )->m_Active_Layer;
MODULE* module = (MODULE*) m_Parent;
if( !module )
return;
BOARD* brd = GetBoard( );
if( brd->IsLayerVisible( m_Layer ) == false )
return;
auto frame = static_cast<PCB_BASE_FRAME*> ( panel->GetParent() );
auto color = frame->Settings().Colors().GetLayerColor( m_Layer );
auto displ_opts = (PCB_DISPLAY_OPTIONS*)( panel->GetDisplayOptions() );
if(( draw_mode & GR_ALLOW_HIGHCONTRAST ) && displ_opts && displ_opts->m_ContrastModeDisplay )
{
if( !IsOnLayer( curr_layer ) )
color = COLOR4D( DARKDARKGRAY );
}
ux0 = m_Start.x - offset.x;
uy0 = m_Start.y - offset.y;
dx = m_End.x - offset.x;
dy = m_End.y - offset.y;
GRSetDrawMode( DC, draw_mode );
bool filled = displ_opts ? displ_opts->m_DisplayModEdgeFill : FILLED;
if( IsCopperLayer( m_Layer ) )
filled = displ_opts ? displ_opts->m_DisplayPcbTrackFill : FILLED;
switch( m_Shape )
{
case S_SEGMENT:
if( filled )
GRLine( panel->GetClipBox(), DC, ux0, uy0, dx, dy, m_Width, color );
else
// SKETCH Mode
GRCSegm( panel->GetClipBox(), DC, ux0, uy0, dx, dy, m_Width, color );
break;
case S_CIRCLE:
radius = KiROUND( Distance( ux0, uy0, dx, dy ) );
if( filled )
{
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius, m_Width, color );
}
else // SKETCH Mode
{
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius + (m_Width / 2), color );
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius - (m_Width / 2), color );
}
break;
case S_ARC:
radius = KiROUND( Distance( ux0, uy0, dx, dy ) );
StAngle = ArcTangente( dy - uy0, dx - ux0 );
EndAngle = StAngle + m_Angle;
if( !panel->GetPrintMirrored() )
{
if( StAngle > EndAngle )
std::swap( StAngle, EndAngle );
}
else // Mirrored mode: arc orientation is reversed
{
if( StAngle < EndAngle )
std::swap( StAngle, EndAngle );
}
if( filled )
{
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle, radius, m_Width, color );
}
else // SKETCH Mode
{
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle,
radius + (m_Width / 2), color );
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle,
radius - (m_Width / 2), color );
}
break;
case S_POLYGON:
if( m_Poly.IsEmpty() )
break;
{
// We must compute absolute coordinates from m_PolyPoints
// which are relative to module position, orientation 0
std::vector<wxPoint> points;
for( auto iter = m_Poly.CIterate(); iter; iter++ )
{
points.push_back( wxPoint( iter->x,iter->y ) );
}
for( unsigned ii = 0; ii < points.size(); ii++ )
{
wxPoint& pt = points[ii];
RotatePoint( &pt.x, &pt.y, module->GetOrientation() );
pt += module->GetPosition() - offset;
}
GRPoly( panel->GetClipBox(), DC, points.size(), &points[0], true, m_Width, color, color );
}
break;
default:
break;
}
}
void D_PAD::DrawShape( EDA_RECT* aClipBox, wxDC* aDC, PAD_DRAWINFO& aDrawInfo )
{
wxPoint coord[4];
int delta_cx, delta_cy;
int angle = m_Orient;
int seg_width;
GRSetDrawMode( aDC, aDrawInfo.m_DrawMode );
// calculate pad shape position :
wxPoint shape_pos = ReturnShapePos() - aDrawInfo.m_Offset;
wxSize halfsize = m_Size;
halfsize.x >>= 1;
halfsize.y >>= 1;
switch( GetShape() )
{
case PAD_CIRCLE:
if( aDrawInfo.m_ShowPadFilled )
GRFilledCircle( aClipBox, aDC, shape_pos.x, shape_pos.y,
halfsize.x + aDrawInfo.m_Mask_margin.x, 0,
aDrawInfo.m_Color, aDrawInfo.m_Color );
else
GRCircle( aClipBox, aDC, shape_pos.x, shape_pos.y,
halfsize.x + aDrawInfo.m_Mask_margin.x,
m_PadSketchModePenSize, aDrawInfo.m_Color );
if( aDrawInfo.m_PadClearance )
{
GRCircle( aClipBox,
aDC, shape_pos.x, shape_pos.y,
halfsize.x + aDrawInfo.m_PadClearance,
0,
aDrawInfo.m_Color );
}
break;
case PAD_OVAL:
{
wxPoint segStart, segEnd;
seg_width = BuildSegmentFromOvalShape(segStart, segEnd, angle);
segStart += shape_pos;
segEnd += shape_pos;
if( aDrawInfo.m_ShowPadFilled )
{
GRFillCSegm( aClipBox, aDC, segStart.x, segStart.y, segEnd.x, segEnd.y,
seg_width, aDrawInfo.m_Color );
}
else
{
GRCSegm( aClipBox, aDC, segStart.x, segStart.y, segEnd.x, segEnd.y,
seg_width, m_PadSketchModePenSize, aDrawInfo.m_Color );
}
/* Draw the isolation line. */
if( aDrawInfo.m_PadClearance )
{
seg_width += 2 * aDrawInfo.m_PadClearance;
GRCSegm( aClipBox, aDC, segStart.x, segStart.y, segEnd.x, segEnd.y,
seg_width, aDrawInfo.m_Color );
}
}
break;
case PAD_RECT:
case PAD_TRAPEZOID:
BuildPadPolygon( coord, aDrawInfo.m_Mask_margin, angle );
for( int ii = 0; ii < 4; ii++ )
coord[ii] += shape_pos;
GRClosedPoly( aClipBox, aDC, 4, coord, aDrawInfo.m_ShowPadFilled,
aDrawInfo.m_ShowPadFilled ? 0 : m_PadSketchModePenSize,
aDrawInfo.m_Color, aDrawInfo.m_Color );
if( aDrawInfo.m_PadClearance )
{
BuildPadPolygon( coord, wxSize( aDrawInfo.m_PadClearance,
aDrawInfo.m_PadClearance ), angle );
for( int ii = 0; ii < 4; ii++ )
coord[ii] += shape_pos;
GRClosedPoly( aClipBox, aDC, 4, coord, 0, aDrawInfo.m_Color, aDrawInfo.m_Color );
}
break;
default:
break;
}
/* Draw the pad hole */
wxPoint holepos = m_Pos - aDrawInfo.m_Offset;
int hole = m_Drill.x >> 1;
bool drawhole = hole > 0;
if( !aDrawInfo.m_ShowPadFilled && !aDrawInfo. m_ShowNotPlatedHole )
drawhole = false;
if( drawhole )
{
bool blackpenstate = false;
if( aDrawInfo.m_IsPrinting )
{
blackpenstate = GetGRForceBlackPenState();
GRForceBlackPen( false );
aDrawInfo.m_HoleColor = g_DrawBgColor;
}
if( aDrawInfo.m_DrawMode != GR_XOR )
GRSetDrawMode( aDC, GR_COPY );
else
GRSetDrawMode( aDC, GR_XOR );
int hole_color = aDrawInfo.m_HoleColor;
if( aDrawInfo. m_ShowNotPlatedHole ) // Draw a specific hole color
hole_color = aDrawInfo.m_NPHoleColor;
switch( m_DrillShape )
{
case PAD_CIRCLE:
if( aDC->LogicalToDeviceXRel( hole ) > 1 )
GRFilledCircle( aClipBox, aDC, holepos.x, holepos.y, hole, 0,
aDrawInfo.m_Color, hole_color );
break;
case PAD_OVAL:
halfsize.x = m_Drill.x >> 1;
halfsize.y = m_Drill.y >> 1;
if( m_Drill.x > m_Drill.y ) /* horizontal */
{
delta_cx = halfsize.x - halfsize.y;
delta_cy = 0;
seg_width = m_Drill.y;
}
else /* vertical */
{
delta_cx = 0;
delta_cy = halfsize.y - halfsize.x;
seg_width = m_Drill.x;
}
RotatePoint( &delta_cx, &delta_cy, angle );
GRFillCSegm( aClipBox, aDC, holepos.x + delta_cx, holepos.y + delta_cy,
holepos.x - delta_cx, holepos.y - delta_cy, seg_width,
hole_color );
break;
default:
break;
}
if( aDrawInfo.m_IsPrinting )
GRForceBlackPen( blackpenstate );
}
GRSetDrawMode( aDC, aDrawInfo.m_DrawMode );
/* Draw "No connect" ( / or \ or cross X ) if necessary. : */
if( m_Netname.IsEmpty() && aDrawInfo.m_ShowNCMark )
{
int dx0 = MIN( halfsize.x, halfsize.y );
int nc_color = BLUE;
if( m_layerMask & LAYER_FRONT ) /* Draw \ */
GRLine( aClipBox, aDC, holepos.x - dx0, holepos.y - dx0,
holepos.x + dx0, holepos.y + dx0, 0, nc_color );
if( m_layerMask & LAYER_BACK ) /* Draw / */
GRLine( aClipBox, aDC, holepos.x + dx0, holepos.y - dx0,
holepos.x - dx0, holepos.y + dx0, 0, nc_color );
}
/* Draw the pad number */
if( !aDrawInfo.m_Display_padnum && !aDrawInfo.m_Display_netname )
return;
wxPoint tpos0 = shape_pos; // Position of the centre of text
wxPoint tpos = tpos0;
wxSize AreaSize; // size of text area, normalized to AreaSize.y < AreaSize.x
int shortname_len = m_ShortNetname.Len();
if( !aDrawInfo.m_Display_netname )
shortname_len = 0;
if( GetShape() == PAD_CIRCLE )
angle = 0;
AreaSize = m_Size;
if( m_Size.y > m_Size.x )
{
angle += 900;
AreaSize.x = m_Size.y;
AreaSize.y = m_Size.x;
}
if( shortname_len > 0 ) // if there is a netname, provides room to display this netname
{
AreaSize.y /= 2; // Text used only the upper area of the
// pad. The lower area displays the net name
tpos.y -= AreaSize.y / 2;
}
// Calculate the position of text, that is the middle point of the upper
// area of the pad
RotatePoint( &tpos, shape_pos, angle );
/* Draw text with an angle between -90 deg and + 90 deg */
int t_angle = angle;
NORMALIZE_ANGLE_90( t_angle );
/* Note: in next calculations, texte size is calculated for 3 or more
* chars. Of course, pads numbers and nets names can have less than 3
* chars. but after some tries, i found this is gives the best look
*/
#define MIN_CHAR_COUNT 3
wxString buffer;
int tsize;
if( aDrawInfo.m_Display_padnum )
{
ReturnStringPadName( buffer );
int numpad_len = buffer.Len();
numpad_len = MAX( numpad_len, MIN_CHAR_COUNT );
tsize = min( AreaSize.y, AreaSize.x / numpad_len );
#define CHAR_SIZE_MIN 5
if( aDC->LogicalToDeviceXRel( tsize ) >= CHAR_SIZE_MIN ) // Not drawable when size too small.
{
// tsize reserve room for marges and segments thickness
tsize = (int) ( tsize * 0.8 );
DrawGraphicText( aDrawInfo.m_DrawPanel, aDC, tpos, WHITE, buffer, t_angle,
wxSize( tsize, tsize ), GR_TEXT_HJUSTIFY_CENTER,
GR_TEXT_VJUSTIFY_CENTER, tsize / 7, false, false );
}
}
// display the short netname, if exists
if( shortname_len == 0 )
return;
shortname_len = MAX( shortname_len, MIN_CHAR_COUNT );
tsize = min( AreaSize.y, AreaSize.x / shortname_len );
if( aDC->LogicalToDeviceXRel( tsize ) >= CHAR_SIZE_MIN ) // Not drawable in size too small.
{
tpos = tpos0;
if( aDrawInfo.m_Display_padnum )
tpos.y += AreaSize.y / 2;
RotatePoint( &tpos, shape_pos, angle );
// tsize reserve room for marges and segments thickness
tsize = (int) ( tsize * 0.8 );
DrawGraphicText( aDrawInfo.m_DrawPanel, aDC, tpos, WHITE, m_ShortNetname, t_angle,
wxSize( tsize, tsize ), GR_TEXT_HJUSTIFY_CENTER,
GR_TEXT_VJUSTIFY_CENTER, tsize / 7, false, false );
}
}
void GERBER_DRAW_ITEM::Draw( EDA_DRAW_PANEL* aPanel, wxDC* aDC, GR_DRAWMODE aDrawMode,
const wxPoint& aOffset, GBR_DISPLAY_OPTIONS* aDrawOptions )
{
// used when a D_CODE is not found. default D_CODE to draw a flashed item
static D_CODE dummyD_CODE( 0 );
bool isFilled;
int radius;
int halfPenWidth;
static bool show_err;
D_CODE* d_codeDescr = GetDcodeDescr();
if( d_codeDescr == NULL )
d_codeDescr = &dummyD_CODE;
COLOR4D color = m_GerberImageFile->GetPositiveDrawColor();
if( ( aDrawMode & GR_HIGHLIGHT ) && !( aDrawMode & GR_AND ) )
color.SetToLegacyHighlightColor();
/* isDark is true if flash is positive and should use a drawing
* color other than the background color, else use the background color
* when drawing so that an erasure happens.
*/
bool isDark = !(m_LayerNegative ^ m_GerberImageFile->m_ImageNegative);
if( !isDark )
{
// draw in background color ("negative" color)
color = aDrawOptions->m_NegativeDrawColor;
}
GRSetDrawMode( aDC, aDrawMode );
isFilled = aDrawOptions->m_DisplayLinesFill;
switch( m_Shape )
{
case GBR_POLYGON:
isFilled = aDrawOptions->m_DisplayPolygonsFill;
if( !isDark )
isFilled = true;
DrawGbrPoly( aPanel->GetClipBox(), aDC, color, aOffset, isFilled );
break;
case GBR_CIRCLE:
radius = KiROUND( GetLineLength( m_Start, m_End ) );
halfPenWidth = m_Size.x >> 1;
if( !isFilled )
{
// draw the border of the pen's path using two circles, each as narrow as possible
GRCircle( aPanel->GetClipBox(), aDC, GetABPosition( m_Start ),
radius - halfPenWidth, 0, color );
GRCircle( aPanel->GetClipBox(), aDC, GetABPosition( m_Start ),
radius + halfPenWidth, 0, color );
}
else // Filled mode
{
GRCircle( aPanel->GetClipBox(), aDC, GetABPosition( m_Start ),
radius, m_Size.x, color );
}
break;
case GBR_ARC:
// Currently, arcs plotted with a rectangular aperture are not supported.
// a round pen only is expected.
#if 0 // for arc debug only
GRLine( aPanel->GetClipBox(), aDC, GetABPosition( m_Start ),
GetABPosition( m_ArcCentre ), 0, color );
GRLine( aPanel->GetClipBox(), aDC, GetABPosition( m_End ),
GetABPosition( m_ArcCentre ), 0, color );
#endif
if( !isFilled )
{
GRArc1( aPanel->GetClipBox(), aDC, GetABPosition( m_Start ),
GetABPosition( m_End ), GetABPosition( m_ArcCentre ),
0, color );
}
else
{
GRArc1( aPanel->GetClipBox(), aDC, GetABPosition( m_Start ),
GetABPosition( m_End ), GetABPosition( m_ArcCentre ),
m_Size.x, color );
}
break;
case GBR_SPOT_CIRCLE:
case GBR_SPOT_RECT:
case GBR_SPOT_OVAL:
case GBR_SPOT_POLY:
case GBR_SPOT_MACRO:
isFilled = aDrawOptions->m_DisplayFlashedItemsFill;
d_codeDescr->DrawFlashedShape( this, aPanel->GetClipBox(), aDC, color,
m_Start, isFilled );
break;
case GBR_SEGMENT:
/* Plot a line from m_Start to m_End.
* Usually, a round pen is used, but some gerber files use a rectangular pen
* In fact, any aperture can be used to plot a line.
* currently: only a square pen is handled (I believe using a polygon gives a strange plot).
*/
if( d_codeDescr->m_Shape == APT_RECT )
{
if( m_Polygon.OutlineCount() == 0 )
ConvertSegmentToPolygon();
DrawGbrPoly( aPanel->GetClipBox(), aDC, color, aOffset, isFilled );
}
else
{
if( !isFilled )
{
GRCSegm( aPanel->GetClipBox(), aDC, GetABPosition( m_Start ),
GetABPosition( m_End ), m_Size.x, color );
}
else
{
GRFilledSegment( aPanel->GetClipBox(), aDC, GetABPosition( m_Start ),
GetABPosition( m_End ), m_Size.x, color );
}
}
break;
default:
if( !show_err )
{
wxMessageBox( wxT( "Trace_Segment() type error" ) );
show_err = true;
}
break;
}
}
void EDGE_MODULE::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE draw_mode,
const wxPoint& offset )
{
int ux0, uy0, dx, dy, radius, StAngle, EndAngle;
int typeaff;
LAYER_ID curr_layer = ( (PCB_SCREEN*) panel->GetScreen() )->m_Active_Layer;
MODULE* module = (MODULE*) m_Parent;
if( !module )
return;
BOARD* brd = GetBoard( );
if( brd->IsLayerVisible( m_Layer ) == false )
return;
EDA_COLOR_T color = brd->GetLayerColor( m_Layer );
if(( draw_mode & GR_ALLOW_HIGHCONTRAST ) && DisplayOpt.ContrastModeDisplay )
{
if( !IsOnLayer( curr_layer ) )
ColorTurnToDarkDarkGray( &color );
}
PCB_BASE_FRAME* frame = (PCB_BASE_FRAME*) panel->GetParent();
ux0 = m_Start.x - offset.x;
uy0 = m_Start.y - offset.y;
dx = m_End.x - offset.x;
dy = m_End.y - offset.y;
GRSetDrawMode( DC, draw_mode );
typeaff = frame->m_DisplayModEdge;
if( IsCopperLayer( m_Layer ) )
{
typeaff = frame->m_DisplayPcbTrackFill;
if( !typeaff )
typeaff = SKETCH;
}
if( DC->LogicalToDeviceXRel( m_Width ) <= MIN_DRAW_WIDTH )
typeaff = LINE;
switch( m_Shape )
{
case S_SEGMENT:
if( typeaff == LINE )
GRLine( panel->GetClipBox(), DC, ux0, uy0, dx, dy, 0, color );
else if( typeaff == FILLED )
GRLine( panel->GetClipBox(), DC, ux0, uy0, dx, dy, m_Width, color );
else
// SKETCH Mode
GRCSegm( panel->GetClipBox(), DC, ux0, uy0, dx, dy, m_Width, color );
break;
case S_CIRCLE:
radius = KiROUND( Distance( ux0, uy0, dx, dy ) );
if( typeaff == LINE )
{
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius, color );
}
else
{
if( typeaff == FILLED )
{
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius, m_Width, color );
}
else // SKETCH Mode
{
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius + (m_Width / 2), color );
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius - (m_Width / 2), color );
}
}
break;
case S_ARC:
radius = KiROUND( Distance( ux0, uy0, dx, dy ) );
StAngle = ArcTangente( dy - uy0, dx - ux0 );
EndAngle = StAngle + m_Angle;
if( !panel->GetPrintMirrored() )
{
if( StAngle > EndAngle )
EXCHG( StAngle, EndAngle );
}
else // Mirrored mode: arc orientation is reversed
{
if( StAngle < EndAngle )
EXCHG( StAngle, EndAngle );
}
if( typeaff == LINE )
{
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle, radius, color );
}
else if( typeaff == FILLED )
{
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle, radius, m_Width, color );
}
else // SKETCH Mode
{
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle,
radius + (m_Width / 2), color );
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle,
radius - (m_Width / 2), color );
}
break;
case S_POLYGON:
{
// We must compute true coordinates from m_PolyPoints
// which are relative to module position, orientation 0
std::vector<wxPoint> points = m_PolyPoints;
for( unsigned ii = 0; ii < points.size(); ii++ )
{
wxPoint& pt = points[ii];
RotatePoint( &pt.x, &pt.y, module->GetOrientation() );
pt += module->GetPosition() - offset;
}
GRPoly( panel->GetClipBox(), DC, points.size(), &points[0], true, m_Width, color, color );
}
break;
default:
break;
}
}
/* Draw PCB_TARGET object: 2 segments + 1 circle
* The circle radius is half the radius of the target
* 2 lines have length the diameter of the target
*/
void PCB_TARGET::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE mode_color,
const wxPoint& offset )
{
int radius, ox, oy, width;
int dx1, dx2, dy1, dy2;
int typeaff;
ox = m_Pos.x + offset.x;
oy = m_Pos.y + offset.y;
BOARD * brd = GetBoard( );
if( brd->IsLayerVisible( m_Layer ) == false )
return;
EDA_COLOR_T gcolor = brd->GetLayerColor( m_Layer );
GRSetDrawMode( DC, mode_color );
typeaff = DisplayOpt.DisplayDrawItems;
width = m_Width;
if( DC->LogicalToDeviceXRel( width ) <= MIN_DRAW_WIDTH )
typeaff = LINE;
radius = m_Size / 3;
if( GetShape() ) // shape X
radius = m_Size / 2;
switch( typeaff )
{
case LINE:
width = 0;
case FILLED:
GRCircle( panel->GetClipBox(), DC, ox, oy, radius, width, gcolor );
break;
case SKETCH:
GRCircle( panel->GetClipBox(), DC, ox, oy, radius + (width / 2), gcolor );
GRCircle( panel->GetClipBox(), DC, ox, oy, radius - (width / 2), gcolor );
break;
}
radius = m_Size / 2;
dx1 = radius;
dy1 = 0;
dx2 = 0;
dy2 = radius;
if( GetShape() ) // shape X
{
dx1 = dy1 = radius;
dx2 = dx1;
dy2 = -dy1;
}
switch( typeaff )
{
case LINE:
case FILLED:
GRLine( panel->GetClipBox(), DC, ox - dx1, oy - dy1, ox + dx1, oy + dy1, width, gcolor );
GRLine( panel->GetClipBox(), DC, ox - dx2, oy - dy2, ox + dx2, oy + dy2, width, gcolor );
break;
case SKETCH:
GRCSegm( panel->GetClipBox(), DC, ox - dx1, oy - dy1, ox + dx1, oy + dy1, width, gcolor );
GRCSegm( panel->GetClipBox(), DC, ox - dx2, oy - dy2, ox + dx2, oy + dy2, width, gcolor );
break;
}
}
void VIA::Draw( EDA_DRAW_PANEL* panel, wxDC* aDC, GR_DRAWMODE aDrawMode, const wxPoint& aOffset )
{
wxCHECK_RET( panel != NULL, wxT( "VIA::Draw panel cannot be NULL." ) );
int radius;
PCB_LAYER_ID curr_layer = ( (PCB_SCREEN*) panel->GetScreen() )->m_Active_Layer;
int fillvia = 0;
PCB_BASE_FRAME* frame = (PCB_BASE_FRAME*) panel->GetParent();
PCB_SCREEN* screen = frame->GetScreen();
auto displ_opts = (PCB_DISPLAY_OPTIONS*)( frame->GetDisplayOptions() );
if( displ_opts->m_DisplayViaFill == FILLED )
fillvia = 1;
GRSetDrawMode( aDC, aDrawMode );
BOARD * brd = GetBoard();
COLOR4D color = frame->Settings().Colors().GetItemColor( LAYER_VIAS + GetViaType() );
if( brd->IsElementVisible( LAYER_VIAS + GetViaType() ) == false
&& !( aDrawMode & GR_HIGHLIGHT ) )
return;
// Only draw the via if at least one of the layers it crosses is being displayed
if( !( brd->GetVisibleLayers() & GetLayerSet() ).any() )
return;
if( displ_opts->m_ContrastModeDisplay )
{
if( !IsOnLayer( curr_layer ) )
color = COLOR4D( DARKDARKGRAY );
}
if( ( aDrawMode & GR_HIGHLIGHT ) && !( aDrawMode & GR_AND ) )
color.SetToLegacyHighlightColor();
color.a = 0.588;
radius = m_Width >> 1;
// for small via size on screen (radius < 4 pixels) draw a simplified shape
int radius_in_pixels = aDC->LogicalToDeviceXRel( radius );
bool fast_draw = false;
// Vias are drawn as a filled circle or a double circle. The hole will be drawn later
int drill_radius = GetDrillValue() / 2;
int inner_radius = radius - aDC->DeviceToLogicalXRel( 2 );
if( radius_in_pixels < MIN_VIA_DRAW_SIZE )
{
fast_draw = true;
fillvia = false;
}
if( fillvia )
{
GRFilledCircle( panel->GetClipBox(), aDC, m_Start + aOffset, radius, color );
}
else
{
GRCircle( panel->GetClipBox(), aDC, m_Start + aOffset, radius, 0, color );
if ( fast_draw )
return;
GRCircle( panel->GetClipBox(), aDC, m_Start + aOffset, inner_radius, 0, color );
}
if( fillvia )
{
bool blackpenstate = false;
if( screen->m_IsPrinting )
{
blackpenstate = GetGRForceBlackPenState();
GRForceBlackPen( false );
color = WHITE;
}
else
{
color = BLACK; // or DARKGRAY;
}
if( (aDrawMode & GR_XOR) == 0)
GRSetDrawMode( aDC, GR_COPY );
// Draw hole if the radius is > 1pixel.
if( aDC->LogicalToDeviceXRel( drill_radius ) > 1 )
GRFilledCircle( panel->GetClipBox(), aDC, m_Start.x + aOffset.x,
m_Start.y + aOffset.y, drill_radius, 0, color, color );
if( screen->m_IsPrinting )
GRForceBlackPen( blackpenstate );
}
else
{
if( drill_radius < inner_radius ) // We can show the via hole
GRCircle( panel->GetClipBox(), aDC, m_Start + aOffset, drill_radius, 0, color );
}
if( ShowClearance( displ_opts, this ) )
{
GRCircle( panel->GetClipBox(), aDC, m_Start + aOffset, radius + GetClearance(), 0, color );
}
// for Micro Vias, draw a partial cross : X on component layer, or + on copper layer
// (so we can see 2 superimposed microvias ):
if( GetViaType() == VIA_MICROVIA )
{
int ax, ay, bx, by;
if( IsOnLayer( B_Cu ) )
{
ax = radius; ay = 0;
bx = drill_radius; by = 0;
}
else
{
ax = ay = (radius * 707) / 1000;
bx = by = (drill_radius * 707) / 1000;
}
// lines '|' or '\'
GRLine( panel->GetClipBox(), aDC, m_Start.x + aOffset.x - ax,
m_Start.y + aOffset.y - ay,
m_Start.x + aOffset.x - bx,
m_Start.y + aOffset.y - by, 0, color );
GRLine( panel->GetClipBox(), aDC, m_Start.x + aOffset.x + bx,
m_Start.y + aOffset.y + by,
m_Start.x + aOffset.x + ax,
m_Start.y + aOffset.y + ay, 0, color );
// lines - or '/'
GRLine( panel->GetClipBox(), aDC, m_Start.x + aOffset.x + ay,
m_Start.y + aOffset.y - ax,
m_Start.x + aOffset.x + by,
m_Start.y + aOffset.y - bx, 0, color );
GRLine( panel->GetClipBox(), aDC, m_Start.x + aOffset.x - by,
m_Start.y + aOffset.y + bx,
m_Start.x + aOffset.x - ay,
m_Start.y + aOffset.y + ax, 0, color );
}
// for Buried Vias, draw a partial line : orient depending on layer pair
// (so we can see superimposed buried vias ):
if( GetViaType() == VIA_BLIND_BURIED )
{
int ax = 0, ay = radius, bx = 0, by = drill_radius;
PCB_LAYER_ID layer_top, layer_bottom;
LayerPair( &layer_top, &layer_bottom );
// lines for the top layer
RotatePoint( &ax, &ay, layer_top * 3600.0 / brd->GetCopperLayerCount( ) );
RotatePoint( &bx, &by, layer_top * 3600.0 / brd->GetCopperLayerCount( ) );
GRLine( panel->GetClipBox(), aDC, m_Start.x + aOffset.x - ax,
m_Start.y + aOffset.y - ay,
m_Start.x + aOffset.x - bx,
m_Start.y + aOffset.y - by, 0, color );
// lines for the bottom layer
ax = 0; ay = radius; bx = 0; by = drill_radius;
RotatePoint( &ax, &ay, layer_bottom * 3600.0 / brd->GetCopperLayerCount( ) );
RotatePoint( &bx, &by, layer_bottom * 3600.0 / brd->GetCopperLayerCount( ) );
GRLine( panel->GetClipBox(), aDC, m_Start.x + aOffset.x - ax,
m_Start.y + aOffset.y - ay,
m_Start.x + aOffset.x - bx,
m_Start.y + aOffset.y - by, 0, color );
}
// Display the short netname:
if( GetNetCode() == NETINFO_LIST::UNCONNECTED )
return;
if( displ_opts->m_DisplayNetNamesMode == 0 || displ_opts->m_DisplayNetNamesMode == 1 )
return;
NETINFO_ITEM* net = GetNet();
if( net == NULL )
return;
int len = net->GetShortNetname().Len();
if( len > 0 )
{
// calculate a good size for the text
int tsize = m_Width / len;
if( aDC->LogicalToDeviceXRel( tsize ) >= MIN_TEXT_SIZE )
{
tsize = (tsize * 7) / 10; // small reduction to give a better look, inside via
if( (aDrawMode & GR_XOR) == 0 )
GRSetDrawMode( aDC, GR_COPY );
EDA_RECT* clipbox = panel->GetClipBox();
DrawGraphicHaloText( clipbox, aDC, m_Start,
color, WHITE, BLACK, net->GetShortNetname(), 0,
wxSize( tsize, tsize ),
GR_TEXT_HJUSTIFY_CENTER, GR_TEXT_VJUSTIFY_CENTER,
tsize / 7, false, false );
}
}
}
void MIREPCB::Draw(WinEDA_DrawPanel * panel, wxDC * DC,
const wxPoint & offset, int mode_color)
/**********************************************************/
/* Affichage de 1 mire : 2 segments + 1 cercle
le cercle a pour rayon le demi rayon de la mire
les 2 traits ont pour longueur le diametre de la mire
*/
{
int rayon, ox, oy, gcolor, width;
int dx1,dx2, dy1, dy2;
int typeaff;
int zoom;
ox = m_Pos.x + offset.x;
oy = m_Pos.y + offset.y;
gcolor = g_DesignSettings.m_LayerColor[m_Layer];
if ( (gcolor & ITEM_NOT_SHOW) != 0 ) return;
zoom = panel->GetZoom();
GRSetDrawMode(DC, mode_color);
typeaff = DisplayOpt.DisplayDrawItems;
width = m_Width;
if( width/zoom < 2 ) typeaff = FILAIRE;
/* Trace du cercle: */
rayon = m_Size / 4;
switch( typeaff )
{
case FILAIRE:
GRCircle(&panel->m_ClipBox, DC, ox, oy, rayon, gcolor) ;
break;
default:
case FILLED:
GRCircle(&panel->m_ClipBox, DC, ox, oy, rayon, width, gcolor);
break;
case SKETCH:
GRCircle(&panel->m_ClipBox, DC, ox, oy, rayon + (width/2), gcolor) ;
GRCircle(&panel->m_ClipBox, DC, ox, oy, rayon - (width/2), gcolor) ;
break;
}
/* Trace des 2 traits */
rayon = m_Size/2;
dx1 = rayon, dy1 = 0;
dx2 = 0, dy2 = rayon;
if( m_Shape) /* Forme X */
{
dx1 = dy1 = (rayon * 7)/5;
dx2 = dx1; dy2 = -dy1;
}
switch( typeaff )
{
case FILAIRE:
GRLine(&panel->m_ClipBox, DC, ox - dx1, oy - dy1,
ox + dx1, oy + dy1, gcolor);
GRLine(&panel->m_ClipBox, DC, ox - dx2, oy - dy2,
ox + dx2, oy + dy2, gcolor);
break;
case FILLED:
GRFillCSegm(&panel->m_ClipBox, DC, ox - dx1, oy - dy1,
ox + dx1, oy + dy1,
width, gcolor);
GRFillCSegm(&panel->m_ClipBox, DC, ox - dx2, oy - dy2,
ox + dx2, oy + dy2,
width, gcolor);
break;
case SKETCH:
GRCSegm(&panel->m_ClipBox, DC, ox - dx1, oy - dy1,
ox + dx1, oy + dy1,
width, gcolor);
GRCSegm(&panel->m_ClipBox, DC, ox - dx2, oy - dy2,
ox + dx2, oy + dy2,
width, gcolor);
break;
}
}
void Trace_Segment(WinEDA_DrawPanel * panel, wxDC * DC, TRACK* track, int draw_mode)
/***********************************************************************************/
/* routine de trace de 1 segment de piste.
Parametres :
pt_piste = adresse de la description de la piste en buflib
draw_mode = mode ( GR_XOR, GR_OR..)
*/
{
int l_piste;
int color;
int zoom;
int rayon;
int fillopt;
static bool show_err;
color = g_DesignSettings.m_LayerColor[track->m_Layer];
if(color & ITEM_NOT_SHOW ) return ;
zoom = panel->GetZoom();
GRSetDrawMode(DC, draw_mode);
if( draw_mode & GR_SURBRILL)
{
if( draw_mode & GR_AND) color &= ~HIGHT_LIGHT_FLAG;
else color |= HIGHT_LIGHT_FLAG;
}
if ( color & HIGHT_LIGHT_FLAG)
color = ColorRefs[color & MASKCOLOR].m_LightColor;
rayon = l_piste = track->m_Width >> 1;
fillopt = DisplayOpt.DisplayPcbTrackFill ? FILLED : SKETCH;
switch (track->m_Shape)
{
case S_CIRCLE:
rayon = (int)hypot((double)(track->m_End.x-track->m_Start.x),
(double)(track->m_End.y-track->m_Start.y) );
if ( (l_piste/zoom) < L_MIN_DESSIN)
{
GRCircle(&panel->m_ClipBox, DC, track->m_Start.x, track->m_Start.y,
rayon , color) ;
}
if( fillopt == SKETCH)
{
GRCircle(&panel->m_ClipBox, DC, track->m_Start.x, track->m_Start.y,
rayon-l_piste, color);
GRCircle(&panel->m_ClipBox, DC, track->m_Start.x, track->m_Start.y,
rayon+l_piste, color);
}
else
{
GRCircle(&panel->m_ClipBox, DC, track->m_Start.x, track->m_Start.y,
rayon, track->m_Width,color);
}
break;
case S_ARC:
{
if( fillopt == SKETCH)
{
GRArc1(&panel->m_ClipBox, DC, track->m_Start.x, track->m_Start.y,
track->m_End.x, track->m_End.y,
track->m_Param, track->m_Sous_Netcode, color);
}
else
{
GRArc1(&panel->m_ClipBox, DC, track->m_Start.x, track->m_Start.y,
track->m_End.x, track->m_End.y,
track->m_Param,track->m_Sous_Netcode,
track->m_Width, color);
}
}
break;
case S_SPOT_CIRCLE:
fillopt = DisplayOpt.DisplayPadFill ? FILLED : SKETCH;
if ( (rayon/zoom) < L_MIN_DESSIN)
{
GRCircle(&panel->m_ClipBox, DC, track->m_Start.x, track->m_Start.y,
rayon , color) ;
}
else if( fillopt == SKETCH )
{
GRCircle(&panel->m_ClipBox, DC, track->m_Start.x, track->m_Start.y,
rayon, color);
}
else
{
GRFilledCircle(&panel->m_ClipBox, DC, track->m_Start.x, track->m_Start.y,
rayon, color, color);
}
break;
case S_SPOT_RECT:
case S_RECT:
fillopt = DisplayOpt.DisplayPadFill ? FILLED : SKETCH;
if ( (l_piste/zoom) < L_MIN_DESSIN)
{
GRLine(&panel->m_ClipBox, DC, track->m_Start.x, track->m_Start.y,
track->m_End.x, track->m_End.y, color);
}
else if( fillopt == SKETCH )
{
GRRect(&panel->m_ClipBox, DC,
track->m_Start.x - l_piste,
track->m_Start.y - l_piste,
track->m_End.x + l_piste,
track->m_End.y + l_piste,
color) ;
}
else
{
GRFilledRect(&panel->m_ClipBox, DC,
track->m_Start.x - l_piste,
track->m_Start.y - l_piste,
track->m_End.x + l_piste,
track->m_End.y + l_piste,
color, color) ;
}
break;
case S_SPOT_OVALE:
fillopt = DisplayOpt.DisplayPadFill ? FILLED : SKETCH;
case S_SEGMENT:
if ( (l_piste/zoom) < L_MIN_DESSIN)
{
GRLine(&panel->m_ClipBox, DC, track->m_Start.x, track->m_Start.y,
track->m_End.x, track->m_End.y, color);
break;
}
if( fillopt == SKETCH )
{
GRCSegm(&panel->m_ClipBox, DC, track->m_Start.x, track->m_Start.y,
track->m_End.x, track->m_End.y,
track->m_Width, color) ;
}
else
{
GRFillCSegm(&panel->m_ClipBox, DC, track->m_Start.x, track->m_Start.y,
track->m_End.x, track->m_End.y,
track->m_Width, color) ;
}
break;
default:
if ( ! show_err )
{
DisplayError(panel, wxT("Trace_Segment() type error"));
show_err = TRUE;
}
break;
}
}
void Trace_DrawSegmentPcb(WinEDA_DrawPanel * panel, wxDC * DC,
DRAWSEGMENT * PtDrawSegment, int draw_mode)
/**************************************************************************/
/* Affichage d'un segment type drawing PCB:
Entree : ox, oy = offset de trace
draw_mode = mode de trace ( GR_OR, GR_XOR, GrAND)
Les contours sont de differents type:
segment
cercle
arc
*/
{
int ux0, uy0, dx, dy;
int l_piste;
int color, mode;
int zoom = panel->GetZoom();
int rayon;
color = g_DesignSettings.m_LayerColor[PtDrawSegment->m_Layer];
if(color & ITEM_NOT_SHOW ) return ;
GRSetDrawMode(DC, draw_mode);
l_piste = PtDrawSegment->m_Width >> 1; /* l_piste = demi largeur piste */
/* coord de depart */
ux0 = PtDrawSegment->m_Start.x;
uy0 = PtDrawSegment->m_Start.y;
/* coord d'arrivee */
dx = PtDrawSegment->m_End.x;
dy = PtDrawSegment->m_End.y;
mode = DisplayOpt.DisplayPcbTrackFill ? FILLED : SKETCH;
if(PtDrawSegment->m_Flags & FORCE_SKETCH) mode = SKETCH;
if ( l_piste < (L_MIN_DESSIN * zoom) ) mode = FILAIRE;
switch (PtDrawSegment->m_Shape)
{
case S_CIRCLE:
rayon = (int)hypot((double)(dx-ux0),(double)(dy-uy0) );
if ( mode == FILAIRE)
{
GRCircle(&panel->m_ClipBox, DC, ux0, uy0, rayon, color) ;
}
else if( mode == SKETCH)
{
GRCircle(&panel->m_ClipBox, DC, ux0, uy0, rayon-l_piste, color);
GRCircle(&panel->m_ClipBox, DC, ux0, uy0, rayon+l_piste, color);
}
else
{
GRCircle(&panel->m_ClipBox, DC, ux0, uy0, rayon, PtDrawSegment->m_Width,color);
}
break;
case S_ARC:
{
int StAngle, EndAngle;
rayon = (int)hypot((double)(dx-ux0),(double)(dy-uy0) );
StAngle = (int) ArcTangente(dy-uy0, dx-ux0);
EndAngle = StAngle + PtDrawSegment->m_Angle;
if ( mode == FILAIRE)
GRArc(&panel->m_ClipBox, DC, ux0, uy0, StAngle, EndAngle, rayon, color);
else if( mode == SKETCH)
{
GRArc(&panel->m_ClipBox, DC, ux0, uy0, StAngle, EndAngle,
rayon - l_piste, color);
GRArc(&panel->m_ClipBox, DC, ux0, uy0, StAngle, EndAngle,
rayon + l_piste, color);
}
else
{
GRArc(&panel->m_ClipBox, DC, ux0, uy0, StAngle, EndAngle,
rayon, PtDrawSegment->m_Width,color);
}
}
break;
default:
if( mode == FILAIRE)
GRLine(&panel->m_ClipBox, DC, ux0, uy0, dx, dy, color) ;
else if( mode == SKETCH)
{
GRCSegm(&panel->m_ClipBox, DC, ux0, uy0, dx, dy,
PtDrawSegment->m_Width, color) ;
}
else
{
GRFillCSegm(&panel->m_ClipBox, DC, ux0, uy0, dx, dy,
PtDrawSegment->m_Width, color) ;
}
break;
}
}
void VIA::Draw( EDA_DRAW_PANEL* panel, wxDC* aDC, GR_DRAWMODE aDrawMode,
const wxPoint& aOffset )
{
int radius;
LAYER_NUM curr_layer = ( (PCB_SCREEN*) panel->GetScreen() )->m_Active_Layer;
int fillvia = 0;
PCB_BASE_FRAME* frame = (PCB_BASE_FRAME*) panel->GetParent();
PCB_SCREEN* screen = frame->GetScreen();
if( frame->m_DisplayViaFill == FILLED )
fillvia = 1;
GRSetDrawMode( aDC, aDrawMode );
BOARD * brd = GetBoard( );
EDA_COLOR_T color = brd->GetVisibleElementColor(VIAS_VISIBLE + GetViaType());
if( brd->IsElementVisible( PCB_VISIBLE(VIAS_VISIBLE + GetViaType()) ) == false
&& ( color & HIGHLIGHT_FLAG ) != HIGHLIGHT_FLAG )
return;
if( DisplayOpt.ContrastModeDisplay )
{
if( !IsOnLayer( curr_layer ) )
ColorTurnToDarkDarkGray( &color );
}
if( aDrawMode & GR_HIGHLIGHT )
ColorChangeHighlightFlag( &color, !(aDrawMode & GR_AND) );
ColorApplyHighlightFlag( &color );
SetAlpha( &color, 150 );
radius = m_Width >> 1;
// for small via size on screen (radius < 4 pixels) draw a simplified shape
int radius_in_pixels = aDC->LogicalToDeviceXRel( radius );
bool fast_draw = false;
// Vias are drawn as a filled circle or a double circle. The hole will be drawn later
int drill_radius = GetDrillValue() / 2;
int inner_radius = radius - aDC->DeviceToLogicalXRel( 2 );
if( radius_in_pixels < MIN_VIA_DRAW_SIZE )
{
fast_draw = true;
fillvia = false;
}
if( fillvia )
{
GRFilledCircle( panel->GetClipBox(), aDC, m_Start + aOffset, radius, color );
}
else
{
GRCircle( panel->GetClipBox(), aDC, m_Start + aOffset, radius, 0, color );
if ( fast_draw )
return;
GRCircle( panel->GetClipBox(), aDC, m_Start + aOffset, inner_radius, 0, color );
}
// Draw the via hole if the display option allows it
if( DisplayOpt.m_DisplayViaMode != VIA_HOLE_NOT_SHOW )
{
// Display all drill holes requested or Display non default holes requested
if( (DisplayOpt.m_DisplayViaMode == ALL_VIA_HOLE_SHOW)
|| ( (drill_radius > 0 ) && !IsDrillDefault() ) )
{
if( fillvia )
{
bool blackpenstate = false;
if( screen->m_IsPrinting )
{
blackpenstate = GetGRForceBlackPenState();
GRForceBlackPen( false );
color = WHITE;
}
else
{
color = BLACK; // or DARKGRAY;
}
if( (aDrawMode & GR_XOR) == 0)
GRSetDrawMode( aDC, GR_COPY );
if( aDC->LogicalToDeviceXRel( drill_radius ) > MIN_DRAW_WIDTH ) // Draw hole if large enough.
GRFilledCircle( panel->GetClipBox(), aDC, m_Start.x + aOffset.x,
m_Start.y + aOffset.y, drill_radius, 0, color, color );
if( screen->m_IsPrinting )
GRForceBlackPen( blackpenstate );
}
else
{
if( drill_radius < inner_radius ) // We can show the via hole
GRCircle( panel->GetClipBox(), aDC, m_Start + aOffset, drill_radius, 0, color );
}
}
}
if( ShowClearance( this ) )
{
GRCircle( panel->GetClipBox(), aDC, m_Start + aOffset, radius + GetClearance(), 0, color );
}
// for Micro Vias, draw a partial cross : X on component layer, or + on copper layer
// (so we can see 2 superimposed microvias ):
if( GetViaType() == VIA_MICROVIA )
{
int ax, ay, bx, by;
if( IsOnLayer( LAYER_N_BACK ) )
{
ax = radius; ay = 0;
bx = drill_radius; by = 0;
}
else
{
ax = ay = (radius * 707) / 1000;
bx = by = (drill_radius * 707) / 1000;
}
/* lines | or \ */
GRLine( panel->GetClipBox(), aDC, m_Start.x + aOffset.x - ax,
m_Start.y + aOffset.y - ay,
m_Start.x + aOffset.x - bx,
m_Start.y + aOffset.y - by, 0, color );
GRLine( panel->GetClipBox(), aDC, m_Start.x + aOffset.x + bx,
m_Start.y + aOffset.y + by,
m_Start.x + aOffset.x + ax,
m_Start.y + aOffset.y + ay, 0, color );
// lines - or /
GRLine( panel->GetClipBox(), aDC, m_Start.x + aOffset.x + ay,
m_Start.y + aOffset.y - ax,
m_Start.x + aOffset.x + by,
m_Start.y + aOffset.y - bx, 0, color );
GRLine( panel->GetClipBox(), aDC, m_Start.x + aOffset.x - by,
m_Start.y + aOffset.y + bx,
m_Start.x + aOffset.x - ay,
m_Start.y + aOffset.y + ax, 0, color );
}
// for Buried Vias, draw a partial line : orient depending on layer pair
// (so we can see superimposed buried vias ):
if( GetViaType() == VIA_BLIND_BURIED )
{
int ax = 0, ay = radius, bx = 0, by = drill_radius;
LAYER_NUM layer_top, layer_bottom;
( (VIA*) this )->LayerPair( &layer_top, &layer_bottom );
// lines for the top layer
RotatePoint( &ax, &ay, layer_top * 3600.0 / brd->GetCopperLayerCount( ) );
RotatePoint( &bx, &by, layer_top * 3600.0 / brd->GetCopperLayerCount( ) );
GRLine( panel->GetClipBox(), aDC, m_Start.x + aOffset.x - ax,
m_Start.y + aOffset.y - ay,
m_Start.x + aOffset.x - bx,
m_Start.y + aOffset.y - by, 0, color );
// lines for the bottom layer
ax = 0; ay = radius; bx = 0; by = drill_radius;
RotatePoint( &ax, &ay, layer_bottom * 3600.0 / brd->GetCopperLayerCount( ) );
RotatePoint( &bx, &by, layer_bottom * 3600.0 / brd->GetCopperLayerCount( ) );
GRLine( panel->GetClipBox(), aDC, m_Start.x + aOffset.x - ax,
m_Start.y + aOffset.y - ay,
m_Start.x + aOffset.x - bx,
m_Start.y + aOffset.y - by, 0, color );
}
// Display the short netname:
if( GetNetCode() == NETINFO_LIST::UNCONNECTED )
return;
if( DisplayOpt.DisplayNetNamesMode == 0 || DisplayOpt.DisplayNetNamesMode == 1 )
return;
NETINFO_ITEM* net = GetNet();
if( net == NULL )
return;
int len = net->GetShortNetname().Len();
if( len > 0 )
{
// calculate a good size for the text
int tsize = m_Width / len;
if( aDC->LogicalToDeviceXRel( tsize ) >= MIN_TEXT_SIZE )
{
tsize = (tsize * 7) / 10; // small reduction to give a better look, inside via
if( (aDrawMode & GR_XOR) == 0 )
GRSetDrawMode( aDC, GR_COPY );
EDA_RECT* clipbox = panel? panel->GetClipBox() : NULL;
DrawGraphicHaloText( clipbox, aDC, m_Start,
color, WHITE, BLACK, net->GetShortNetname(), 0,
wxSize( tsize, tsize ),
GR_TEXT_HJUSTIFY_CENTER, GR_TEXT_VJUSTIFY_CENTER,
tsize / 7, false, false );
}
}
}
void DRAWSEGMENT::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE draw_mode,
const wxPoint& aOffset )
{
int ux0, uy0, dx, dy;
int l_trace;
int mode;
int radius;
LAYER_NUM curr_layer = ( (PCB_SCREEN*) panel->GetScreen() )->m_Active_Layer;
EDA_COLOR_T color;
BOARD * brd = GetBoard( );
if( brd->IsLayerVisible( GetLayer() ) == false )
return;
color = brd->GetLayerColor( GetLayer() );
if( ( draw_mode & GR_ALLOW_HIGHCONTRAST ) && DisplayOpt.ContrastModeDisplay )
{
if( !IsOnLayer( curr_layer ) && !IsOnLayer( EDGE_N ) )
ColorTurnToDarkDarkGray( &color );
}
GRSetDrawMode( DC, draw_mode );
l_trace = m_Width >> 1; /* half trace width */
// Line start point or Circle and Arc center
ux0 = m_Start.x + aOffset.x;
uy0 = m_Start.y + aOffset.y;
// Line end point or circle and arc start point
dx = m_End.x + aOffset.x;
dy = m_End.y + aOffset.y;
mode = DisplayOpt.DisplayDrawItems;
if( m_Flags & FORCE_SKETCH )
mode = SKETCH;
if( DC->LogicalToDeviceXRel( l_trace ) <= MIN_DRAW_WIDTH )
mode = LINE;
switch( m_Shape )
{
case S_CIRCLE:
radius = KiROUND( Distance( ux0, uy0, dx, dy ) );
if( mode == LINE )
{
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius, color );
}
else if( mode == SKETCH )
{
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius - l_trace, color );
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius + l_trace, color );
}
else
{
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius, m_Width, color );
}
break;
case S_ARC:
double StAngle, EndAngle;
radius = KiROUND( Distance( ux0, uy0, dx, dy ) );
StAngle = ArcTangente( dy - uy0, dx - ux0 );
EndAngle = StAngle + m_Angle;
if( !panel->GetPrintMirrored() )
{
if( StAngle > EndAngle )
EXCHG( StAngle, EndAngle );
}
else // Mirrored mode: arc orientation is reversed
{
if( StAngle < EndAngle )
EXCHG( StAngle, EndAngle );
}
if( mode == LINE )
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle, radius, color );
else if( mode == SKETCH )
{
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle,
radius - l_trace, color );
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle,
radius + l_trace, color );
}
else
{
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle,
radius, m_Width, color );
}
break;
case S_CURVE:
m_BezierPoints = Bezier2Poly(m_Start, m_BezierC1, m_BezierC2, m_End);
for (unsigned int i=1; i < m_BezierPoints.size(); i++) {
if( mode == LINE )
GRLine( panel->GetClipBox(), DC,
m_BezierPoints[i].x, m_BezierPoints[i].y,
m_BezierPoints[i-1].x, m_BezierPoints[i-1].y, 0,
color );
else if( mode == SKETCH )
{
GRCSegm( panel->GetClipBox(), DC,
m_BezierPoints[i].x, m_BezierPoints[i].y,
m_BezierPoints[i-1].x, m_BezierPoints[i-1].y,
m_Width, color );
}
else
{
GRFillCSegm( panel->GetClipBox(), DC,
m_BezierPoints[i].x, m_BezierPoints[i].y,
m_BezierPoints[i-1].x, m_BezierPoints[i-1].y,
m_Width, color );
}
}
break;
default:
if( mode == LINE )
{
GRLine( panel->GetClipBox(), DC, ux0, uy0, dx, dy, 0, color );
}
else if( mode == SKETCH )
{
GRCSegm( panel->GetClipBox(), DC, ux0, uy0, dx, dy, m_Width, color );
}
else
{
GRFillCSegm( panel->GetClipBox(), DC, ux0, uy0, dx, dy, m_Width, color );
}
break;
}
}
void D_PAD::DrawShape( EDA_RECT* aClipBox, wxDC* aDC, PAD_DRAWINFO& aDrawInfo )
{
wxPoint coord[4];
double angle = m_Orient;
int seg_width;
GRSetDrawMode( aDC, aDrawInfo.m_DrawMode );
// calculate pad shape position :
wxPoint shape_pos = ShapePos() - aDrawInfo.m_Offset;
wxSize halfsize = m_Size;
halfsize.x >>= 1;
halfsize.y >>= 1;
switch( GetShape() )
{
case PAD_CIRCLE:
if( aDrawInfo.m_ShowPadFilled )
GRFilledCircle( aClipBox, aDC, shape_pos.x, shape_pos.y,
halfsize.x + aDrawInfo.m_Mask_margin.x, 0,
aDrawInfo.m_Color, aDrawInfo.m_Color );
else
GRCircle( aClipBox, aDC, shape_pos.x, shape_pos.y,
halfsize.x + aDrawInfo.m_Mask_margin.x,
m_PadSketchModePenSize, aDrawInfo.m_Color );
if( aDrawInfo.m_PadClearance )
{
GRCircle( aClipBox,
aDC, shape_pos.x, shape_pos.y,
halfsize.x + aDrawInfo.m_PadClearance,
0, aDrawInfo.m_Color );
}
break;
case PAD_OVAL:
{
wxPoint segStart, segEnd;
seg_width = BuildSegmentFromOvalShape(segStart, segEnd, angle,
aDrawInfo.m_Mask_margin);
segStart += shape_pos;
segEnd += shape_pos;
if( aDrawInfo.m_ShowPadFilled )
{
GRFillCSegm( aClipBox, aDC, segStart.x, segStart.y, segEnd.x, segEnd.y,
seg_width, aDrawInfo.m_Color );
}
else
{
GRCSegm( aClipBox, aDC, segStart.x, segStart.y, segEnd.x, segEnd.y,
seg_width, m_PadSketchModePenSize, aDrawInfo.m_Color );
}
// Draw the clearance line
if( aDrawInfo.m_PadClearance )
{
seg_width += 2 * aDrawInfo.m_PadClearance;
GRCSegm( aClipBox, aDC, segStart.x, segStart.y, segEnd.x, segEnd.y,
seg_width, aDrawInfo.m_Color );
}
}
break;
case PAD_RECT:
case PAD_TRAPEZOID:
BuildPadPolygon( coord, aDrawInfo.m_Mask_margin, angle );
for( int ii = 0; ii < 4; ii++ )
coord[ii] += shape_pos;
GRClosedPoly( aClipBox, aDC, 4, coord, aDrawInfo.m_ShowPadFilled,
aDrawInfo.m_ShowPadFilled ? 0 : m_PadSketchModePenSize,
aDrawInfo.m_Color, aDrawInfo.m_Color );
if( aDrawInfo.m_PadClearance )
{
BuildPadPolygon( coord, wxSize( aDrawInfo.m_PadClearance,
aDrawInfo.m_PadClearance ), angle );
for( int ii = 0; ii < 4; ii++ )
coord[ii] += shape_pos;
GRClosedPoly( aClipBox, aDC, 4, coord, 0, aDrawInfo.m_Color, aDrawInfo.m_Color );
}
break;
default:
break;
}
// Draw the pad hole
wxPoint holepos = m_Pos - aDrawInfo.m_Offset;
int hole = m_Drill.x >> 1;
bool drawhole = hole > 0;
if( !aDrawInfo.m_ShowPadFilled && !aDrawInfo.m_ShowNotPlatedHole )
drawhole = false;
if( drawhole )
{
bool blackpenstate = false;
if( aDrawInfo.m_IsPrinting )
{
blackpenstate = GetGRForceBlackPenState();
GRForceBlackPen( false );
aDrawInfo.m_HoleColor = WHITE;
}
if( aDrawInfo.m_DrawMode != GR_XOR )
GRSetDrawMode( aDC, GR_COPY );
else
GRSetDrawMode( aDC, GR_XOR );
EDA_COLOR_T hole_color = aDrawInfo.m_HoleColor;
if( aDrawInfo. m_ShowNotPlatedHole ) // Draw a specific hole color
hole_color = aDrawInfo.m_NPHoleColor;
switch( GetDrillShape() )
{
case PAD_DRILL_CIRCLE:
if( aDC->LogicalToDeviceXRel( hole ) > MIN_DRAW_WIDTH )
GRFilledCircle( aClipBox, aDC, holepos.x, holepos.y, hole, 0,
hole_color, hole_color );
break;
case PAD_DRILL_OBLONG:
{
wxPoint drl_start, drl_end;
GetOblongDrillGeometry( drl_start, drl_end, seg_width );
GRFilledSegment( aClipBox, aDC, holepos + drl_start,
holepos + drl_end, seg_width, hole_color );
}
break;
default:
break;
}
if( aDrawInfo.m_IsPrinting )
GRForceBlackPen( blackpenstate );
}
GRSetDrawMode( aDC, aDrawInfo.m_DrawMode );
// Draw "No connect" ( / or \ or cross X ) if necessary
if( GetNetCode() == 0 && aDrawInfo.m_ShowNCMark )
{
int dx0 = std::min( halfsize.x, halfsize.y );
EDA_COLOR_T nc_color = BLUE;
if( m_layerMask[F_Cu] ) /* Draw \ */
GRLine( aClipBox, aDC, holepos.x - dx0, holepos.y - dx0,
holepos.x + dx0, holepos.y + dx0, 0, nc_color );
if( m_layerMask[B_Cu] ) // Draw /
GRLine( aClipBox, aDC, holepos.x + dx0, holepos.y - dx0,
holepos.x - dx0, holepos.y + dx0, 0, nc_color );
}
if( aDrawInfo.m_DrawMode != GR_XOR )
GRSetDrawMode( aDC, GR_COPY );
else
GRSetDrawMode( aDC, GR_XOR );
// Draw the pad number
if( !aDrawInfo.m_Display_padnum && !aDrawInfo.m_Display_netname )
return;
wxPoint tpos0 = shape_pos; // Position of the centre of text
wxPoint tpos = tpos0;
wxSize AreaSize; // size of text area, normalized to AreaSize.y < AreaSize.x
int shortname_len = 0;
if( aDrawInfo.m_Display_netname )
shortname_len = GetShortNetname().Len();
if( GetShape() == PAD_CIRCLE )
angle = 0;
AreaSize = m_Size;
if( m_Size.y > m_Size.x )
{
angle += 900;
AreaSize.x = m_Size.y;
AreaSize.y = m_Size.x;
}
if( shortname_len > 0 ) // if there is a netname, provides room to display this netname
{
AreaSize.y /= 2; // Text used only the upper area of the
// pad. The lower area displays the net name
tpos.y -= AreaSize.y / 2;
}
// Calculate the position of text, that is the middle point of the upper
// area of the pad
RotatePoint( &tpos, shape_pos, angle );
// Draw text with an angle between -90 deg and + 90 deg
double t_angle = angle;
NORMALIZE_ANGLE_90( t_angle );
/* Note: in next calculations, texte size is calculated for 3 or more
* chars. Of course, pads numbers and nets names can have less than 3
* chars. but after some tries, i found this is gives the best look
*/
#define MIN_CHAR_COUNT 3
wxString buffer;
int tsize;
EDA_RECT* clipBox = aDrawInfo.m_DrawPanel?
aDrawInfo.m_DrawPanel->GetClipBox() : NULL;
if( aDrawInfo.m_Display_padnum )
{
StringPadName( buffer );
int numpad_len = buffer.Len();
numpad_len = std::max( numpad_len, MIN_CHAR_COUNT );
tsize = std::min( AreaSize.y, AreaSize.x / numpad_len );
if( aDC->LogicalToDeviceXRel( tsize ) >= MIN_TEXT_SIZE ) // Not drawable when size too small.
{
// tsize reserve room for marges and segments thickness
tsize = ( tsize * 7 ) / 10;
DrawGraphicHaloText( clipBox, aDC, tpos,
aDrawInfo.m_Color, BLACK, WHITE,
buffer, t_angle,
wxSize( tsize , tsize ), GR_TEXT_HJUSTIFY_CENTER,
GR_TEXT_VJUSTIFY_CENTER, tsize / 7, false, false );
}
}
// display the short netname, if exists
if( shortname_len == 0 )
return;
shortname_len = std::max( shortname_len, MIN_CHAR_COUNT );
tsize = std::min( AreaSize.y, AreaSize.x / shortname_len );
if( aDC->LogicalToDeviceXRel( tsize ) >= MIN_TEXT_SIZE ) // Not drawable in size too small.
{
tpos = tpos0;
if( aDrawInfo.m_Display_padnum )
tpos.y += AreaSize.y / 2;
RotatePoint( &tpos, shape_pos, angle );
// tsize reserve room for marges and segments thickness
tsize = ( tsize * 7 ) / 10;
DrawGraphicHaloText( clipBox, aDC, tpos,
aDrawInfo.m_Color, BLACK, WHITE,
GetShortNetname(), t_angle,
wxSize( tsize, tsize ), GR_TEXT_HJUSTIFY_CENTER,
GR_TEXT_VJUSTIFY_CENTER, tsize / 7, false, false );
}
}
