void SEGZONE::Draw( EDA_DRAW_PANEL* panel, wxDC* aDC, GR_DRAWMODE aDrawMode,
const wxPoint& aOffset )
{
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)panel->GetDisplayOptions();
if( displ_opts->m_DisplayZonesMode != 0 )
return;
BOARD * brd = GetBoard( );
EDA_COLOR_T color = brd->GetLayerColor(m_Layer);
if( brd->IsLayerVisible( m_Layer ) == false && !( aDrawMode & GR_HIGHLIGHT ) )
return;
#ifdef USE_WX_OVERLAY
// If dragged not draw in OnPaint otherwise remains impressed in wxOverlay
if( (m_Flags & IS_DRAGGED) && aDC->IsKindOf(wxCLASSINFO(wxPaintDC)))
return;
#endif
if( ( aDrawMode & GR_ALLOW_HIGHCONTRAST ) && displ_opts->m_ContrastModeDisplay )
{
LAYER_ID curr_layer = ( (PCB_SCREEN*) panel->GetScreen() )->m_Active_Layer;
if( !IsOnLayer( curr_layer ) )
ColorTurnToDarkDarkGray( &color );
}
if( aDrawMode & GR_HIGHLIGHT )
ColorChangeHighlightFlag( &color, !(aDrawMode & GR_AND) );
ColorApplyHighlightFlag( &color );
SetAlpha( &color, 150 );
GRSetDrawMode( aDC, aDrawMode );
int l_trace = m_Width / 2;
if( aDC->LogicalToDeviceXRel( l_trace ) <= MIN_DRAW_WIDTH )
{
GRLine( panel->GetClipBox(), aDC, m_Start + aOffset, m_End + aOffset, 0, color );
return;
}
if( !displ_opts->m_DisplayPcbTrackFill || GetState( FORCE_SKETCH ) )
{
GRCSegm( panel->GetClipBox(), aDC, m_Start + aOffset, m_End + aOffset, m_Width, color );
}
else
{
GRFillCSegm( panel->GetClipBox(), aDC, m_Start.x + aOffset.x,
m_Start.y + aOffset.y,
m_End.x + aOffset.x, m_End.y + aOffset.y, m_Width, color );
}
// No clearance or netnames for zones
}
void SEGZONE::Draw( EDA_DRAW_PANEL* panel, wxDC* aDC, GR_DRAWMODE aDrawMode,
const wxPoint& aOffset )
{
auto displ_opts = (PCB_DISPLAY_OPTIONS*)( panel->GetDisplayOptions() );
if( displ_opts->m_DisplayZonesMode != 0 )
return;
BOARD* brd = GetBoard();
auto frame = static_cast<PCB_BASE_FRAME*> ( panel->GetParent() );
auto color = frame->Settings().Colors().GetLayerColor( m_Layer );
if( brd->IsLayerVisible( m_Layer ) == false && !( aDrawMode & GR_HIGHLIGHT ) )
return;
#ifdef USE_WX_OVERLAY
// If dragged not draw in OnPaint otherwise remains impressed in wxOverlay
if( (m_Flags & IS_DRAGGED) && aDC->IsKindOf(wxCLASSINFO(wxPaintDC)))
return;
#endif
if( ( aDrawMode & GR_ALLOW_HIGHCONTRAST ) && displ_opts->m_ContrastModeDisplay )
{
PCB_LAYER_ID curr_layer = ( (PCB_SCREEN*) panel->GetScreen() )->m_Active_Layer;
if( !IsOnLayer( curr_layer ) )
color = COLOR4D( DARKDARKGRAY );
}
if( ( aDrawMode & GR_HIGHLIGHT ) && !( aDrawMode & GR_AND ) )
color.SetToLegacyHighlightColor();
color.a = 0.588;
GRSetDrawMode( aDC, aDrawMode );
// Draw track as line if width <= 1pixel:
if( aDC->LogicalToDeviceXRel( m_Width ) <= 1 )
{
GRLine( panel->GetClipBox(), aDC, m_Start + aOffset, m_End + aOffset, m_Width, color );
return;
}
if( !displ_opts->m_DisplayPcbTrackFill || GetState( FORCE_SKETCH ) )
{
GRCSegm( panel->GetClipBox(), aDC, m_Start + aOffset, m_End + aOffset, m_Width, color );
}
else
{
GRFillCSegm( panel->GetClipBox(), aDC, m_Start.x + aOffset.x,
m_Start.y + aOffset.y,
m_End.x + aOffset.x, m_End.y + aOffset.y, m_Width, color );
}
// No clearance or netnames for zones
}
void D_CODE::DrawFlashedShape( GERBER_DRAW_ITEM* aParent,
EDA_RECT* aClipBox, wxDC* aDC, COLOR4D aColor,
wxPoint aShapePos, bool aFilledShape )
{
int radius;
switch( m_Shape )
{
case APT_MACRO:
GetMacro()->DrawApertureMacroShape( aParent, aClipBox, aDC, aColor,
aShapePos, aFilledShape);
break;
case APT_CIRCLE:
radius = m_Size.x >> 1;
if( !aFilledShape )
GRCircle( aClipBox, aDC, aParent->GetABPosition(aShapePos), radius, 0, aColor );
else
if( m_DrillShape == APT_DEF_NO_HOLE )
{
GRFilledCircle( aClipBox, aDC, aParent->GetABPosition(aShapePos),
radius, aColor );
}
else if( m_DrillShape == APT_DEF_ROUND_HOLE ) // round hole in shape
{
int width = (m_Size.x - m_Drill.x ) / 2;
GRCircle( aClipBox, aDC, aParent->GetABPosition(aShapePos),
radius - (width / 2), width, aColor );
}
else // rectangular hole
{
if( m_Polygon.OutlineCount() == 0 )
ConvertShapeToPolygon();
DrawFlashedPolygon( aParent, aClipBox, aDC, aColor, aFilledShape, aShapePos );
}
break;
case APT_RECT:
{
wxPoint start;
start.x = aShapePos.x - m_Size.x / 2;
start.y = aShapePos.y - m_Size.y / 2;
wxPoint end = start + m_Size;
start = aParent->GetABPosition( start );
end = aParent->GetABPosition( end );
if( !aFilledShape )
{
GRRect( aClipBox, aDC, start.x, start.y, end.x, end.y, 0, aColor );
}
else if( m_DrillShape == APT_DEF_NO_HOLE )
{
GRFilledRect( aClipBox, aDC, start.x, start.y, end.x, end.y, 0, aColor, aColor );
}
else
{
if( m_Polygon.OutlineCount() == 0 )
ConvertShapeToPolygon();
DrawFlashedPolygon( aParent, aClipBox, aDC, aColor, aFilledShape, aShapePos );
}
}
break;
case APT_OVAL:
{
wxPoint start = aShapePos;
wxPoint end = aShapePos;
if( m_Size.x > m_Size.y ) // horizontal oval
{
int delta = (m_Size.x - m_Size.y) / 2;
start.x -= delta;
end.x += delta;
radius = m_Size.y;
}
else // horizontal oval
{
int delta = (m_Size.y - m_Size.x) / 2;
start.y -= delta;
end.y += delta;
radius = m_Size.x;
}
start = aParent->GetABPosition( start );
end = aParent->GetABPosition( end );
if( !aFilledShape )
{
GRCSegm( aClipBox, aDC, start.x, start.y, end.x, end.y, radius, aColor );
}
else if( m_DrillShape == APT_DEF_NO_HOLE )
{
GRFillCSegm( aClipBox, aDC, start.x, start.y, end.x, end.y, radius, aColor );
}
else
{
if( m_Polygon.OutlineCount() == 0 )
ConvertShapeToPolygon();
DrawFlashedPolygon( aParent, aClipBox, aDC, aColor, aFilledShape, aShapePos );
}
}
break;
case APT_POLYGON:
if( m_Polygon.OutlineCount() == 0 )
ConvertShapeToPolygon();
DrawFlashedPolygon( aParent, aClipBox, aDC, aColor, aFilledShape, aShapePos );
break;
}
}
void ZONE_CONTAINER::DrawFilledArea( EDA_DRAW_PANEL* panel,
wxDC* DC, GR_DRAWMODE aDrawMode, const wxPoint& offset )
{
static std::vector <char> CornersTypeBuffer;
static std::vector <wxPoint> CornersBuffer;
// outline_mode is false to show filled polys,
// and true to show polygons outlines only (test and debug purposes)
bool outline_mode = DisplayOpt.DisplayZonesMode == 2 ? true : false;
if( DC == NULL )
return;
if( DisplayOpt.DisplayZonesMode == 1 ) // Do not show filled areas
return;
if( m_FilledPolysList.GetCornersCount() == 0 ) // Nothing to draw
return;
BOARD* brd = GetBoard();
LAYER_NUM curr_layer = ( (PCB_SCREEN*) panel->GetScreen() )->m_Active_Layer;
EDA_COLOR_T color = brd->GetLayerColor( m_Layer );
if( brd->IsLayerVisible( m_Layer ) == false && ( color & HIGHLIGHT_FLAG ) != HIGHLIGHT_FLAG )
return;
GRSetDrawMode( DC, aDrawMode );
if( DisplayOpt.ContrastModeDisplay )
{
if( !IsOnLayer( curr_layer ) )
ColorTurnToDarkDarkGray( &color );
}
if( aDrawMode & GR_HIGHLIGHT )
ColorChangeHighlightFlag( &color, !(aDrawMode & GR_AND) );
ColorApplyHighlightFlag( &color );
SetAlpha( &color, 150 );
CornersTypeBuffer.clear();
CornersBuffer.clear();
// Draw all filled areas
int imax = m_FilledPolysList.GetCornersCount() - 1;
for( int ic = 0; ic <= imax; ic++ )
{
const CPolyPt& corner = m_FilledPolysList.GetCorner( ic );
wxPoint coord( corner.x + offset.x, corner.y + offset.y );
CornersBuffer.push_back( coord );
CornersTypeBuffer.push_back( (char) corner.m_utility );
// the last corner of a filled area is found: draw it
if( (corner.end_contour) || (ic == imax) )
{
/* Draw the current filled area: draw segments outline first
* Curiously, draw segments outline first and after draw filled polygons
* with outlines thickness = 0 is a faster than
* just draw filled polygons but with outlines thickness = m_ZoneMinThickness
* So DO NOT use draw filled polygons with outlines having a thickness > 0
* Note: Extra segments ( added to joint holes with external outline) flagged by
* m_utility != 0 are not drawn
* Note not all polygon libraries provide a flag for these extra-segments, therefore
* the m_utility member can be always 0
*/
{
// Draw outlines:
if( (m_ZoneMinThickness > 1) || outline_mode )
{
int ilim = CornersBuffer.size() - 1;
for( int is = 0, ie = ilim; is <= ilim; ie = is, is++ )
{
int x0 = CornersBuffer[is].x;
int y0 = CornersBuffer[is].y;
int x1 = CornersBuffer[ie].x;
int y1 = CornersBuffer[ie].y;
// Draw only basic outlines, not extra segments.
if( CornersTypeBuffer[ie] == 0 )
{
if( !DisplayOpt.DisplayPcbTrackFill || GetState( FORCE_SKETCH ) )
GRCSegm( panel->GetClipBox(), DC,
x0, y0, x1, y1,
m_ZoneMinThickness, color );
else
GRFillCSegm( panel->GetClipBox(), DC,
x0, y0, x1, y1,
m_ZoneMinThickness, color );
}
}
}
// Draw areas:
if( m_FillMode==0 && !outline_mode )
GRPoly( panel->GetClipBox(), DC, CornersBuffer.size(), &CornersBuffer[0],
true, 0, color, color );
}
CornersTypeBuffer.clear();
CornersBuffer.clear();
}
}
if( m_FillMode == 1 && !outline_mode ) // filled with segments
{
for( unsigned ic = 0; ic < m_FillSegmList.size(); ic++ )
{
wxPoint start = m_FillSegmList[ic].m_Start + offset;
wxPoint end = m_FillSegmList[ic].m_End + offset;
if( !DisplayOpt.DisplayPcbTrackFill || GetState( FORCE_SKETCH ) )
GRCSegm( panel->GetClipBox(), DC, start.x, start.y, end.x, end.y,
m_ZoneMinThickness, color );
else
GRFillCSegm( panel->GetClipBox(), DC, start.x, start.y, end.x, end.y,
m_ZoneMinThickness, color );
}
}
}
void MIREPCB::Draw(WinEDA_DrawPanel * panel, wxDC * DC,
const wxPoint & offset, int mode_color)
/**********************************************************/
/* Affichage de 1 mire : 2 segments + 1 cercle
le cercle a pour rayon le demi rayon de la mire
les 2 traits ont pour longueur le diametre de la mire
*/
{
int rayon, ox, oy, gcolor, width;
int dx1,dx2, dy1, dy2;
int typeaff;
int zoom;
ox = m_Pos.x + offset.x;
oy = m_Pos.y + offset.y;
gcolor = g_DesignSettings.m_LayerColor[m_Layer];
if ( (gcolor & ITEM_NOT_SHOW) != 0 ) return;
zoom = panel->GetZoom();
GRSetDrawMode(DC, mode_color);
typeaff = DisplayOpt.DisplayDrawItems;
width = m_Width;
if( width/zoom < 2 ) typeaff = FILAIRE;
/* Trace du cercle: */
rayon = m_Size / 4;
switch( typeaff )
{
case FILAIRE:
GRCircle(&panel->m_ClipBox, DC, ox, oy, rayon, gcolor) ;
break;
default:
case FILLED:
GRCircle(&panel->m_ClipBox, DC, ox, oy, rayon, width, gcolor);
break;
case SKETCH:
GRCircle(&panel->m_ClipBox, DC, ox, oy, rayon + (width/2), gcolor) ;
GRCircle(&panel->m_ClipBox, DC, ox, oy, rayon - (width/2), gcolor) ;
break;
}
/* Trace des 2 traits */
rayon = m_Size/2;
dx1 = rayon, dy1 = 0;
dx2 = 0, dy2 = rayon;
if( m_Shape) /* Forme X */
{
dx1 = dy1 = (rayon * 7)/5;
dx2 = dx1; dy2 = -dy1;
}
switch( typeaff )
{
case FILAIRE:
GRLine(&panel->m_ClipBox, DC, ox - dx1, oy - dy1,
ox + dx1, oy + dy1, gcolor);
GRLine(&panel->m_ClipBox, DC, ox - dx2, oy - dy2,
ox + dx2, oy + dy2, gcolor);
break;
case FILLED:
GRFillCSegm(&panel->m_ClipBox, DC, ox - dx1, oy - dy1,
ox + dx1, oy + dy1,
width, gcolor);
GRFillCSegm(&panel->m_ClipBox, DC, ox - dx2, oy - dy2,
ox + dx2, oy + dy2,
width, gcolor);
break;
case SKETCH:
GRCSegm(&panel->m_ClipBox, DC, ox - dx1, oy - dy1,
ox + dx1, oy + dy1,
width, gcolor);
GRCSegm(&panel->m_ClipBox, DC, ox - dx2, oy - dy2,
ox + dx2, oy + dy2,
width, gcolor);
break;
}
}
void ZONE_CONTAINER::DrawFilledArea( EDA_DRAW_PANEL* panel,
wxDC* DC, GR_DRAWMODE aDrawMode, const wxPoint& offset )
{
static std::vector <wxPoint> CornersBuffer;
DISPLAY_OPTIONS* displ_opts = (DISPLAY_OPTIONS*)panel->GetDisplayOptions();
// outline_mode is false to show filled polys,
// and true to show polygons outlines only (test and debug purposes)
bool outline_mode = displ_opts->m_DisplayZonesMode == 2 ? true : false;
if( DC == NULL )
return;
if( displ_opts->m_DisplayZonesMode == 1 ) // Do not show filled areas
return;
if( m_FilledPolysList.IsEmpty() ) // Nothing to draw
return;
BOARD* brd = GetBoard();
LAYER_ID curr_layer = ( (PCB_SCREEN*) panel->GetScreen() )->m_Active_Layer;
COLOR4D color = brd->GetLayerColor( m_Layer );
if( brd->IsLayerVisible( m_Layer ) == false && !( aDrawMode & GR_HIGHLIGHT ) )
return;
GRSetDrawMode( DC, aDrawMode );
if( displ_opts->m_ContrastModeDisplay )
{
if( !IsOnLayer( curr_layer ) )
color = COLOR4D( DARKDARKGRAY );
}
if( ( aDrawMode & GR_HIGHLIGHT ) && !( aDrawMode & GR_AND ) )
color.SetToLegacyHighlightColor();
color.a = 0.588;
for ( int ic = 0; ic < m_FilledPolysList.OutlineCount(); ic++ )
{
const SHAPE_LINE_CHAIN& path = m_FilledPolysList.COutline( ic );
CornersBuffer.clear();
wxPoint p0;
for( int j = 0; j < path.PointCount(); j++ )
{
const VECTOR2I& corner = path.CPoint( j );
wxPoint coord( corner.x + offset.x, corner.y + offset.y );
if( j == 0 )
p0 = coord;
CornersBuffer.push_back( coord );
}
CornersBuffer.push_back( p0 );
// Draw outlines:
if( ( m_ZoneMinThickness > 1 ) || outline_mode )
{
int ilim = CornersBuffer.size() - 1;
for( int is = 0, ie = ilim; is <= ilim; ie = is, is++ )
{
int x0 = CornersBuffer[is].x;
int y0 = CornersBuffer[is].y;
int x1 = CornersBuffer[ie].x;
int y1 = CornersBuffer[ie].y;
// Draw only basic outlines, not extra segments.
if( !displ_opts->m_DisplayPcbTrackFill || GetState( FORCE_SKETCH ) )
GRCSegm( panel->GetClipBox(), DC,
x0, y0, x1, y1,
m_ZoneMinThickness, color );
else
GRFillCSegm( panel->GetClipBox(), DC,
x0, y0, x1, y1, m_ZoneMinThickness, color );
}
}
// Draw areas:
if( m_FillMode == 0 && !outline_mode )
GRPoly( panel->GetClipBox(), DC, CornersBuffer.size(), &CornersBuffer[0],
true, 0, color, color );
}
if( m_FillMode == 1 && !outline_mode ) // filled with segments
{
for( unsigned ic = 0; ic < m_FillSegmList.size(); ic++ )
{
wxPoint start = m_FillSegmList[ic].m_Start + offset;
wxPoint end = m_FillSegmList[ic].m_End + offset;
if( !displ_opts->m_DisplayPcbTrackFill || GetState( FORCE_SKETCH ) )
GRCSegm( panel->GetClipBox(), DC, start.x, start.y, end.x, end.y,
m_ZoneMinThickness, color );
else
GRFillCSegm( panel->GetClipBox(), DC, start.x, start.y, end.x, end.y,
m_ZoneMinThickness, color );
}
}
}
void Trace_Segment(WinEDA_DrawPanel * panel, wxDC * DC, TRACK* track, int draw_mode)
/***********************************************************************************/
/* routine de trace de 1 segment de piste.
Parametres :
pt_piste = adresse de la description de la piste en buflib
draw_mode = mode ( GR_XOR, GR_OR..)
*/
{
int l_piste;
int color;
int zoom;
int rayon;
int fillopt;
static bool show_err;
color = g_DesignSettings.m_LayerColor[track->m_Layer];
if(color & ITEM_NOT_SHOW ) return ;
zoom = panel->GetZoom();
GRSetDrawMode(DC, draw_mode);
if( draw_mode & GR_SURBRILL)
{
if( draw_mode & GR_AND) color &= ~HIGHT_LIGHT_FLAG;
else color |= HIGHT_LIGHT_FLAG;
}
if ( color & HIGHT_LIGHT_FLAG)
color = ColorRefs[color & MASKCOLOR].m_LightColor;
rayon = l_piste = track->m_Width >> 1;
fillopt = DisplayOpt.DisplayPcbTrackFill ? FILLED : SKETCH;
switch (track->m_Shape)
{
case S_CIRCLE:
rayon = (int)hypot((double)(track->m_End.x-track->m_Start.x),
(double)(track->m_End.y-track->m_Start.y) );
if ( (l_piste/zoom) < L_MIN_DESSIN)
{
GRCircle(&panel->m_ClipBox, DC, track->m_Start.x, track->m_Start.y,
rayon , color) ;
}
if( fillopt == SKETCH)
{
GRCircle(&panel->m_ClipBox, DC, track->m_Start.x, track->m_Start.y,
rayon-l_piste, color);
GRCircle(&panel->m_ClipBox, DC, track->m_Start.x, track->m_Start.y,
rayon+l_piste, color);
}
else
{
GRCircle(&panel->m_ClipBox, DC, track->m_Start.x, track->m_Start.y,
rayon, track->m_Width,color);
}
break;
case S_ARC:
{
if( fillopt == SKETCH)
{
GRArc1(&panel->m_ClipBox, DC, track->m_Start.x, track->m_Start.y,
track->m_End.x, track->m_End.y,
track->m_Param, track->m_Sous_Netcode, color);
}
else
{
GRArc1(&panel->m_ClipBox, DC, track->m_Start.x, track->m_Start.y,
track->m_End.x, track->m_End.y,
track->m_Param,track->m_Sous_Netcode,
track->m_Width, color);
}
}
break;
case S_SPOT_CIRCLE:
fillopt = DisplayOpt.DisplayPadFill ? FILLED : SKETCH;
if ( (rayon/zoom) < L_MIN_DESSIN)
{
GRCircle(&panel->m_ClipBox, DC, track->m_Start.x, track->m_Start.y,
rayon , color) ;
}
else if( fillopt == SKETCH )
{
GRCircle(&panel->m_ClipBox, DC, track->m_Start.x, track->m_Start.y,
rayon, color);
}
else
{
GRFilledCircle(&panel->m_ClipBox, DC, track->m_Start.x, track->m_Start.y,
rayon, color, color);
}
break;
case S_SPOT_RECT:
case S_RECT:
fillopt = DisplayOpt.DisplayPadFill ? FILLED : SKETCH;
if ( (l_piste/zoom) < L_MIN_DESSIN)
{
GRLine(&panel->m_ClipBox, DC, track->m_Start.x, track->m_Start.y,
track->m_End.x, track->m_End.y, color);
}
else if( fillopt == SKETCH )
{
GRRect(&panel->m_ClipBox, DC,
track->m_Start.x - l_piste,
track->m_Start.y - l_piste,
track->m_End.x + l_piste,
track->m_End.y + l_piste,
color) ;
}
else
{
GRFilledRect(&panel->m_ClipBox, DC,
track->m_Start.x - l_piste,
track->m_Start.y - l_piste,
track->m_End.x + l_piste,
track->m_End.y + l_piste,
color, color) ;
}
break;
case S_SPOT_OVALE:
fillopt = DisplayOpt.DisplayPadFill ? FILLED : SKETCH;
case S_SEGMENT:
if ( (l_piste/zoom) < L_MIN_DESSIN)
{
GRLine(&panel->m_ClipBox, DC, track->m_Start.x, track->m_Start.y,
track->m_End.x, track->m_End.y, color);
break;
}
if( fillopt == SKETCH )
{
GRCSegm(&panel->m_ClipBox, DC, track->m_Start.x, track->m_Start.y,
track->m_End.x, track->m_End.y,
track->m_Width, color) ;
}
else
{
GRFillCSegm(&panel->m_ClipBox, DC, track->m_Start.x, track->m_Start.y,
track->m_End.x, track->m_End.y,
track->m_Width, color) ;
}
break;
default:
if ( ! show_err )
{
DisplayError(panel, wxT("Trace_Segment() type error"));
show_err = TRUE;
}
break;
}
}
void Trace_DrawSegmentPcb(WinEDA_DrawPanel * panel, wxDC * DC,
DRAWSEGMENT * PtDrawSegment, int draw_mode)
/**************************************************************************/
/* Affichage d'un segment type drawing PCB:
Entree : ox, oy = offset de trace
draw_mode = mode de trace ( GR_OR, GR_XOR, GrAND)
Les contours sont de differents type:
segment
cercle
arc
*/
{
int ux0, uy0, dx, dy;
int l_piste;
int color, mode;
int zoom = panel->GetZoom();
int rayon;
color = g_DesignSettings.m_LayerColor[PtDrawSegment->m_Layer];
if(color & ITEM_NOT_SHOW ) return ;
GRSetDrawMode(DC, draw_mode);
l_piste = PtDrawSegment->m_Width >> 1; /* l_piste = demi largeur piste */
/* coord de depart */
ux0 = PtDrawSegment->m_Start.x;
uy0 = PtDrawSegment->m_Start.y;
/* coord d'arrivee */
dx = PtDrawSegment->m_End.x;
dy = PtDrawSegment->m_End.y;
mode = DisplayOpt.DisplayPcbTrackFill ? FILLED : SKETCH;
if(PtDrawSegment->m_Flags & FORCE_SKETCH) mode = SKETCH;
if ( l_piste < (L_MIN_DESSIN * zoom) ) mode = FILAIRE;
switch (PtDrawSegment->m_Shape)
{
case S_CIRCLE:
rayon = (int)hypot((double)(dx-ux0),(double)(dy-uy0) );
if ( mode == FILAIRE)
{
GRCircle(&panel->m_ClipBox, DC, ux0, uy0, rayon, color) ;
}
else if( mode == SKETCH)
{
GRCircle(&panel->m_ClipBox, DC, ux0, uy0, rayon-l_piste, color);
GRCircle(&panel->m_ClipBox, DC, ux0, uy0, rayon+l_piste, color);
}
else
{
GRCircle(&panel->m_ClipBox, DC, ux0, uy0, rayon, PtDrawSegment->m_Width,color);
}
break;
case S_ARC:
{
int StAngle, EndAngle;
rayon = (int)hypot((double)(dx-ux0),(double)(dy-uy0) );
StAngle = (int) ArcTangente(dy-uy0, dx-ux0);
EndAngle = StAngle + PtDrawSegment->m_Angle;
if ( mode == FILAIRE)
GRArc(&panel->m_ClipBox, DC, ux0, uy0, StAngle, EndAngle, rayon, color);
else if( mode == SKETCH)
{
GRArc(&panel->m_ClipBox, DC, ux0, uy0, StAngle, EndAngle,
rayon - l_piste, color);
GRArc(&panel->m_ClipBox, DC, ux0, uy0, StAngle, EndAngle,
rayon + l_piste, color);
}
else
{
GRArc(&panel->m_ClipBox, DC, ux0, uy0, StAngle, EndAngle,
rayon, PtDrawSegment->m_Width,color);
}
}
break;
default:
if( mode == FILAIRE)
GRLine(&panel->m_ClipBox, DC, ux0, uy0, dx, dy, color) ;
else if( mode == SKETCH)
{
GRCSegm(&panel->m_ClipBox, DC, ux0, uy0, dx, dy,
PtDrawSegment->m_Width, color) ;
}
else
{
GRFillCSegm(&panel->m_ClipBox, DC, ux0, uy0, dx, dy,
PtDrawSegment->m_Width, color) ;
}
break;
}
}
void TRACK::Draw( EDA_DRAW_PANEL* panel, wxDC* aDC, GR_DRAWMODE aDrawMode,
const wxPoint& aOffset )
{
BOARD * brd = GetBoard( );
EDA_COLOR_T color = brd->GetLayerColor(m_Layer);
if( brd->IsLayerVisible( m_Layer ) == false && !( aDrawMode & GR_HIGHLIGHT ) )
return;
#ifdef USE_WX_OVERLAY
// If dragged not draw in OnPaint otherwise remains impressed in wxOverlay
if( (m_Flags & IS_DRAGGED) && aDC->IsKindOf(wxCLASSINFO(wxPaintDC)))
return;
#endif
if( ( aDrawMode & GR_ALLOW_HIGHCONTRAST ) && DisplayOpt.ContrastModeDisplay )
{
LAYER_NUM curr_layer = ( (PCB_SCREEN*) panel->GetScreen() )->m_Active_Layer;
if( !IsOnLayer( curr_layer ) )
ColorTurnToDarkDarkGray( &color );
}
if( aDrawMode & GR_HIGHLIGHT )
ColorChangeHighlightFlag( &color, !(aDrawMode & GR_AND) );
ColorApplyHighlightFlag( &color );
SetAlpha( &color, 150 );
GRSetDrawMode( aDC, aDrawMode );
int l_trace = m_Width / 2;
if( aDC->LogicalToDeviceXRel( l_trace ) <= MIN_DRAW_WIDTH )
{
GRLine( panel->GetClipBox(), aDC, m_Start + aOffset, m_End + aOffset, 0, color );
return;
}
if( !DisplayOpt.DisplayPcbTrackFill || GetState( FORCE_SKETCH ) )
{
GRCSegm( panel->GetClipBox(), aDC, m_Start + aOffset, m_End + aOffset, m_Width, color );
}
else
{
GRFillCSegm( panel->GetClipBox(), aDC, m_Start.x + aOffset.x,
m_Start.y + aOffset.y,
m_End.x + aOffset.x, m_End.y + aOffset.y, m_Width, color );
}
if( panel->GetScreen()->m_IsPrinting )
return;
// Show clearance for tracks, not for zone segments
if( ShowClearance( this ) )
{
GRCSegm( panel->GetClipBox(), aDC, m_Start + aOffset, m_End + aOffset,
m_Width + (GetClearance() * 2), color );
}
DrawShortNetname( panel, aDC, aDrawMode, color );
}
void EDA_TextStruct::Draw(WinEDA_DrawPanel * panel, wxDC * DC,
const wxPoint & offset, int color, int draw_mode,
int display_mode, int anchor_color)
/***************************************************************/
/*
Trace de 1 texte type EDA_TextStruct.
offset = Offset de trace (usuellement (0,0)
color = couleur du texte
draw_mode = GR_OR, GR_XOR.., -1 si mode courant.
display_mose = FILAIRE, FILLED ou SKETCH
anchor_color = couleur de l'ancre ( -1 si pas d'ancre ).
*/
{
int zoom;
int coord[100];
int ii, jj, kk, ll, nbpoints;
int width;
if( m_TextDrawings == NULL) /* pointeur sur la liste des segments de dessin */
CreateDrawData();
if( m_TextDrawings == NULL) return;
zoom = panel->GetZoom();
width = m_Width / zoom;
if ( display_mode == FILAIRE ) width = 0;
/* choix de la couleur du texte : */
if ( draw_mode != -1 ) GRSetDrawMode(DC, draw_mode);
/* trace du texte */
if ( zoom > m_ZoomLevelDrawable)
{
GRLine(&panel->m_ClipBox, DC,
m_TextDrawings[1] + offset.x + m_Pos.x,
m_TextDrawings[2] + offset.y + m_Pos.y,
m_TextDrawings[3] + offset.x + m_Pos.x,
m_TextDrawings[4] + offset.y + m_Pos.y,
color);
}
else
{
/* trace ancre du texte ? */
if( anchor_color != -1)
{
int anchor_size = 2 * zoom;
anchor_color &= MASKCOLOR;
/* calcul de la position du texte */
int cX = m_Pos.x - offset.x;
int cY = m_Pos.y - offset.y;
/* trace ancre du texte */
GRLine(&panel->m_ClipBox, DC, cX - anchor_size, cY,
cX + anchor_size, cY, anchor_color);
GRLine(&panel->m_ClipBox, DC, cX, cY - anchor_size ,
cX, cY + anchor_size , anchor_color);
}
jj = 5; ii = jj+1;
while (ii < m_TextDrawingsSize)
{
nbpoints = m_TextDrawings[jj];
if (nbpoints > 50 ) nbpoints = 50;
for ( kk = 0, ll = 0; (kk < nbpoints) && (ii < m_TextDrawingsSize) ; kk++)
{
coord[ll] = m_TextDrawings[ii] + offset.x + m_Pos.x;
ll++; ii++;
coord[ll] = m_TextDrawings[ii] + offset.y + m_Pos.y;
ll++; ii++;
}
jj = ii; ii++;
if( width > 2)
{
for ( kk = 0, ll = 0; kk < (nbpoints-1); kk ++, ll+= 2 )
{
if( display_mode == SKETCH)
GRCSegm(&panel->m_ClipBox, DC,
coord[ll],coord[ll+1],
coord[ll+2],coord[ll+3],
m_Width, color) ;
else GRFillCSegm(&panel->m_ClipBox, DC,
coord[ll],coord[ll+1],
coord[ll+2],coord[ll+3],
m_Width, color) ;
}
}
else
GRPoly(&panel->m_ClipBox, DC, nbpoints, coord, 0, color, color);
}
}
}
void D_PAD::DrawShape( EDA_RECT* aClipBox, wxDC* aDC, PAD_DRAWINFO& aDrawInfo )
{
wxPoint coord[4];
double angle = m_Orient;
int seg_width;
GRSetDrawMode( aDC, aDrawInfo.m_DrawMode );
// calculate pad shape position :
wxPoint shape_pos = ShapePos() - aDrawInfo.m_Offset;
wxSize halfsize = m_Size;
halfsize.x >>= 1;
halfsize.y >>= 1;
switch( GetShape() )
{
case PAD_CIRCLE:
if( aDrawInfo.m_ShowPadFilled )
GRFilledCircle( aClipBox, aDC, shape_pos.x, shape_pos.y,
halfsize.x + aDrawInfo.m_Mask_margin.x, 0,
aDrawInfo.m_Color, aDrawInfo.m_Color );
else
GRCircle( aClipBox, aDC, shape_pos.x, shape_pos.y,
halfsize.x + aDrawInfo.m_Mask_margin.x,
m_PadSketchModePenSize, aDrawInfo.m_Color );
if( aDrawInfo.m_PadClearance )
{
GRCircle( aClipBox,
aDC, shape_pos.x, shape_pos.y,
halfsize.x + aDrawInfo.m_PadClearance,
0, aDrawInfo.m_Color );
}
break;
case PAD_OVAL:
{
wxPoint segStart, segEnd;
seg_width = BuildSegmentFromOvalShape(segStart, segEnd, angle,
aDrawInfo.m_Mask_margin);
segStart += shape_pos;
segEnd += shape_pos;
if( aDrawInfo.m_ShowPadFilled )
{
GRFillCSegm( aClipBox, aDC, segStart.x, segStart.y, segEnd.x, segEnd.y,
seg_width, aDrawInfo.m_Color );
}
else
{
GRCSegm( aClipBox, aDC, segStart.x, segStart.y, segEnd.x, segEnd.y,
seg_width, m_PadSketchModePenSize, aDrawInfo.m_Color );
}
// Draw the clearance line
if( aDrawInfo.m_PadClearance )
{
seg_width += 2 * aDrawInfo.m_PadClearance;
GRCSegm( aClipBox, aDC, segStart.x, segStart.y, segEnd.x, segEnd.y,
seg_width, aDrawInfo.m_Color );
}
}
break;
case PAD_RECT:
case PAD_TRAPEZOID:
BuildPadPolygon( coord, aDrawInfo.m_Mask_margin, angle );
for( int ii = 0; ii < 4; ii++ )
coord[ii] += shape_pos;
GRClosedPoly( aClipBox, aDC, 4, coord, aDrawInfo.m_ShowPadFilled,
aDrawInfo.m_ShowPadFilled ? 0 : m_PadSketchModePenSize,
aDrawInfo.m_Color, aDrawInfo.m_Color );
if( aDrawInfo.m_PadClearance )
{
BuildPadPolygon( coord, wxSize( aDrawInfo.m_PadClearance,
aDrawInfo.m_PadClearance ), angle );
for( int ii = 0; ii < 4; ii++ )
coord[ii] += shape_pos;
GRClosedPoly( aClipBox, aDC, 4, coord, 0, aDrawInfo.m_Color, aDrawInfo.m_Color );
}
break;
default:
break;
}
// Draw the pad hole
wxPoint holepos = m_Pos - aDrawInfo.m_Offset;
int hole = m_Drill.x >> 1;
bool drawhole = hole > 0;
if( !aDrawInfo.m_ShowPadFilled && !aDrawInfo.m_ShowNotPlatedHole )
drawhole = false;
if( drawhole )
{
bool blackpenstate = false;
if( aDrawInfo.m_IsPrinting )
{
blackpenstate = GetGRForceBlackPenState();
GRForceBlackPen( false );
aDrawInfo.m_HoleColor = WHITE;
}
if( aDrawInfo.m_DrawMode != GR_XOR )
GRSetDrawMode( aDC, GR_COPY );
else
GRSetDrawMode( aDC, GR_XOR );
EDA_COLOR_T hole_color = aDrawInfo.m_HoleColor;
if( aDrawInfo. m_ShowNotPlatedHole ) // Draw a specific hole color
hole_color = aDrawInfo.m_NPHoleColor;
switch( GetDrillShape() )
{
case PAD_DRILL_CIRCLE:
if( aDC->LogicalToDeviceXRel( hole ) > MIN_DRAW_WIDTH )
GRFilledCircle( aClipBox, aDC, holepos.x, holepos.y, hole, 0,
hole_color, hole_color );
break;
case PAD_DRILL_OBLONG:
{
wxPoint drl_start, drl_end;
GetOblongDrillGeometry( drl_start, drl_end, seg_width );
GRFilledSegment( aClipBox, aDC, holepos + drl_start,
holepos + drl_end, seg_width, hole_color );
}
break;
default:
break;
}
if( aDrawInfo.m_IsPrinting )
GRForceBlackPen( blackpenstate );
}
GRSetDrawMode( aDC, aDrawInfo.m_DrawMode );
// Draw "No connect" ( / or \ or cross X ) if necessary
if( GetNetCode() == 0 && aDrawInfo.m_ShowNCMark )
{
int dx0 = std::min( halfsize.x, halfsize.y );
EDA_COLOR_T nc_color = BLUE;
if( m_layerMask[F_Cu] ) /* Draw \ */
GRLine( aClipBox, aDC, holepos.x - dx0, holepos.y - dx0,
holepos.x + dx0, holepos.y + dx0, 0, nc_color );
if( m_layerMask[B_Cu] ) // Draw /
GRLine( aClipBox, aDC, holepos.x + dx0, holepos.y - dx0,
holepos.x - dx0, holepos.y + dx0, 0, nc_color );
}
if( aDrawInfo.m_DrawMode != GR_XOR )
GRSetDrawMode( aDC, GR_COPY );
else
GRSetDrawMode( aDC, GR_XOR );
// Draw the pad number
if( !aDrawInfo.m_Display_padnum && !aDrawInfo.m_Display_netname )
return;
wxPoint tpos0 = shape_pos; // Position of the centre of text
wxPoint tpos = tpos0;
wxSize AreaSize; // size of text area, normalized to AreaSize.y < AreaSize.x
int shortname_len = 0;
if( aDrawInfo.m_Display_netname )
shortname_len = GetShortNetname().Len();
if( GetShape() == PAD_CIRCLE )
angle = 0;
AreaSize = m_Size;
if( m_Size.y > m_Size.x )
{
angle += 900;
AreaSize.x = m_Size.y;
AreaSize.y = m_Size.x;
}
if( shortname_len > 0 ) // if there is a netname, provides room to display this netname
{
AreaSize.y /= 2; // Text used only the upper area of the
// pad. The lower area displays the net name
tpos.y -= AreaSize.y / 2;
}
// Calculate the position of text, that is the middle point of the upper
// area of the pad
RotatePoint( &tpos, shape_pos, angle );
// Draw text with an angle between -90 deg and + 90 deg
double t_angle = angle;
NORMALIZE_ANGLE_90( t_angle );
/* Note: in next calculations, texte size is calculated for 3 or more
* chars. Of course, pads numbers and nets names can have less than 3
* chars. but after some tries, i found this is gives the best look
*/
#define MIN_CHAR_COUNT 3
wxString buffer;
int tsize;
EDA_RECT* clipBox = aDrawInfo.m_DrawPanel?
aDrawInfo.m_DrawPanel->GetClipBox() : NULL;
if( aDrawInfo.m_Display_padnum )
{
StringPadName( buffer );
int numpad_len = buffer.Len();
numpad_len = std::max( numpad_len, MIN_CHAR_COUNT );
tsize = std::min( AreaSize.y, AreaSize.x / numpad_len );
if( aDC->LogicalToDeviceXRel( tsize ) >= MIN_TEXT_SIZE ) // Not drawable when size too small.
{
// tsize reserve room for marges and segments thickness
tsize = ( tsize * 7 ) / 10;
DrawGraphicHaloText( clipBox, aDC, tpos,
aDrawInfo.m_Color, BLACK, WHITE,
buffer, t_angle,
wxSize( tsize , tsize ), GR_TEXT_HJUSTIFY_CENTER,
GR_TEXT_VJUSTIFY_CENTER, tsize / 7, false, false );
}
}
// display the short netname, if exists
if( shortname_len == 0 )
return;
shortname_len = std::max( shortname_len, MIN_CHAR_COUNT );
tsize = std::min( AreaSize.y, AreaSize.x / shortname_len );
if( aDC->LogicalToDeviceXRel( tsize ) >= MIN_TEXT_SIZE ) // Not drawable in size too small.
{
tpos = tpos0;
if( aDrawInfo.m_Display_padnum )
tpos.y += AreaSize.y / 2;
RotatePoint( &tpos, shape_pos, angle );
// tsize reserve room for marges and segments thickness
tsize = ( tsize * 7 ) / 10;
DrawGraphicHaloText( clipBox, aDC, tpos,
aDrawInfo.m_Color, BLACK, WHITE,
GetShortNetname(), t_angle,
wxSize( tsize, tsize ), GR_TEXT_HJUSTIFY_CENTER,
GR_TEXT_VJUSTIFY_CENTER, tsize / 7, false, false );
}
}
void DRAWSEGMENT::Draw( EDA_DRAW_PANEL* panel, wxDC* DC, GR_DRAWMODE draw_mode,
const wxPoint& aOffset )
{
int ux0, uy0, dx, dy;
int l_trace;
int mode;
int radius;
LAYER_NUM curr_layer = ( (PCB_SCREEN*) panel->GetScreen() )->m_Active_Layer;
EDA_COLOR_T color;
BOARD * brd = GetBoard( );
if( brd->IsLayerVisible( GetLayer() ) == false )
return;
color = brd->GetLayerColor( GetLayer() );
if( ( draw_mode & GR_ALLOW_HIGHCONTRAST ) && DisplayOpt.ContrastModeDisplay )
{
if( !IsOnLayer( curr_layer ) && !IsOnLayer( EDGE_N ) )
ColorTurnToDarkDarkGray( &color );
}
GRSetDrawMode( DC, draw_mode );
l_trace = m_Width >> 1; /* half trace width */
// Line start point or Circle and Arc center
ux0 = m_Start.x + aOffset.x;
uy0 = m_Start.y + aOffset.y;
// Line end point or circle and arc start point
dx = m_End.x + aOffset.x;
dy = m_End.y + aOffset.y;
mode = DisplayOpt.DisplayDrawItems;
if( m_Flags & FORCE_SKETCH )
mode = SKETCH;
if( DC->LogicalToDeviceXRel( l_trace ) <= MIN_DRAW_WIDTH )
mode = LINE;
switch( m_Shape )
{
case S_CIRCLE:
radius = KiROUND( Distance( ux0, uy0, dx, dy ) );
if( mode == LINE )
{
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius, color );
}
else if( mode == SKETCH )
{
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius - l_trace, color );
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius + l_trace, color );
}
else
{
GRCircle( panel->GetClipBox(), DC, ux0, uy0, radius, m_Width, color );
}
break;
case S_ARC:
double StAngle, EndAngle;
radius = KiROUND( Distance( ux0, uy0, dx, dy ) );
StAngle = ArcTangente( dy - uy0, dx - ux0 );
EndAngle = StAngle + m_Angle;
if( !panel->GetPrintMirrored() )
{
if( StAngle > EndAngle )
EXCHG( StAngle, EndAngle );
}
else // Mirrored mode: arc orientation is reversed
{
if( StAngle < EndAngle )
EXCHG( StAngle, EndAngle );
}
if( mode == LINE )
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle, radius, color );
else if( mode == SKETCH )
{
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle,
radius - l_trace, color );
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle,
radius + l_trace, color );
}
else
{
GRArc( panel->GetClipBox(), DC, ux0, uy0, StAngle, EndAngle,
radius, m_Width, color );
}
break;
case S_CURVE:
m_BezierPoints = Bezier2Poly(m_Start, m_BezierC1, m_BezierC2, m_End);
for (unsigned int i=1; i < m_BezierPoints.size(); i++) {
if( mode == LINE )
GRLine( panel->GetClipBox(), DC,
m_BezierPoints[i].x, m_BezierPoints[i].y,
m_BezierPoints[i-1].x, m_BezierPoints[i-1].y, 0,
color );
else if( mode == SKETCH )
{
GRCSegm( panel->GetClipBox(), DC,
m_BezierPoints[i].x, m_BezierPoints[i].y,
m_BezierPoints[i-1].x, m_BezierPoints[i-1].y,
m_Width, color );
}
else
{
GRFillCSegm( panel->GetClipBox(), DC,
m_BezierPoints[i].x, m_BezierPoints[i].y,
m_BezierPoints[i-1].x, m_BezierPoints[i-1].y,
m_Width, color );
}
}
break;
default:
if( mode == LINE )
{
GRLine( panel->GetClipBox(), DC, ux0, uy0, dx, dy, 0, color );
}
else if( mode == SKETCH )
{
GRCSegm( panel->GetClipBox(), DC, ux0, uy0, dx, dy, m_Width, color );
}
else
{
GRFillCSegm( panel->GetClipBox(), DC, ux0, uy0, dx, dy, m_Width, color );
}
break;
}
}
void D_PAD::DrawShape( EDA_RECT* aClipBox, wxDC* aDC, PAD_DRAWINFO& aDrawInfo )
{
wxPoint coord[4];
int delta_cx, delta_cy;
int angle = m_Orient;
int seg_width;
GRSetDrawMode( aDC, aDrawInfo.m_DrawMode );
// calculate pad shape position :
wxPoint shape_pos = ReturnShapePos() - aDrawInfo.m_Offset;
wxSize halfsize = m_Size;
halfsize.x >>= 1;
halfsize.y >>= 1;
switch( GetShape() )
{
case PAD_CIRCLE:
if( aDrawInfo.m_ShowPadFilled )
GRFilledCircle( aClipBox, aDC, shape_pos.x, shape_pos.y,
halfsize.x + aDrawInfo.m_Mask_margin.x, 0,
aDrawInfo.m_Color, aDrawInfo.m_Color );
else
GRCircle( aClipBox, aDC, shape_pos.x, shape_pos.y,
halfsize.x + aDrawInfo.m_Mask_margin.x,
m_PadSketchModePenSize, aDrawInfo.m_Color );
if( aDrawInfo.m_PadClearance )
{
GRCircle( aClipBox,
aDC, shape_pos.x, shape_pos.y,
halfsize.x + aDrawInfo.m_PadClearance,
0,
aDrawInfo.m_Color );
}
break;
case PAD_OVAL:
{
wxPoint segStart, segEnd;
seg_width = BuildSegmentFromOvalShape(segStart, segEnd, angle);
segStart += shape_pos;
segEnd += shape_pos;
if( aDrawInfo.m_ShowPadFilled )
{
GRFillCSegm( aClipBox, aDC, segStart.x, segStart.y, segEnd.x, segEnd.y,
seg_width, aDrawInfo.m_Color );
}
else
{
GRCSegm( aClipBox, aDC, segStart.x, segStart.y, segEnd.x, segEnd.y,
seg_width, m_PadSketchModePenSize, aDrawInfo.m_Color );
}
/* Draw the isolation line. */
if( aDrawInfo.m_PadClearance )
{
seg_width += 2 * aDrawInfo.m_PadClearance;
GRCSegm( aClipBox, aDC, segStart.x, segStart.y, segEnd.x, segEnd.y,
seg_width, aDrawInfo.m_Color );
}
}
break;
case PAD_RECT:
case PAD_TRAPEZOID:
BuildPadPolygon( coord, aDrawInfo.m_Mask_margin, angle );
for( int ii = 0; ii < 4; ii++ )
coord[ii] += shape_pos;
GRClosedPoly( aClipBox, aDC, 4, coord, aDrawInfo.m_ShowPadFilled,
aDrawInfo.m_ShowPadFilled ? 0 : m_PadSketchModePenSize,
aDrawInfo.m_Color, aDrawInfo.m_Color );
if( aDrawInfo.m_PadClearance )
{
BuildPadPolygon( coord, wxSize( aDrawInfo.m_PadClearance,
aDrawInfo.m_PadClearance ), angle );
for( int ii = 0; ii < 4; ii++ )
coord[ii] += shape_pos;
GRClosedPoly( aClipBox, aDC, 4, coord, 0, aDrawInfo.m_Color, aDrawInfo.m_Color );
}
break;
default:
break;
}
/* Draw the pad hole */
wxPoint holepos = m_Pos - aDrawInfo.m_Offset;
int hole = m_Drill.x >> 1;
bool drawhole = hole > 0;
if( !aDrawInfo.m_ShowPadFilled && !aDrawInfo. m_ShowNotPlatedHole )
drawhole = false;
if( drawhole )
{
bool blackpenstate = false;
if( aDrawInfo.m_IsPrinting )
{
blackpenstate = GetGRForceBlackPenState();
GRForceBlackPen( false );
aDrawInfo.m_HoleColor = g_DrawBgColor;
}
if( aDrawInfo.m_DrawMode != GR_XOR )
GRSetDrawMode( aDC, GR_COPY );
else
GRSetDrawMode( aDC, GR_XOR );
int hole_color = aDrawInfo.m_HoleColor;
if( aDrawInfo. m_ShowNotPlatedHole ) // Draw a specific hole color
hole_color = aDrawInfo.m_NPHoleColor;
switch( m_DrillShape )
{
case PAD_CIRCLE:
if( aDC->LogicalToDeviceXRel( hole ) > 1 )
GRFilledCircle( aClipBox, aDC, holepos.x, holepos.y, hole, 0,
aDrawInfo.m_Color, hole_color );
break;
case PAD_OVAL:
halfsize.x = m_Drill.x >> 1;
halfsize.y = m_Drill.y >> 1;
if( m_Drill.x > m_Drill.y ) /* horizontal */
{
delta_cx = halfsize.x - halfsize.y;
delta_cy = 0;
seg_width = m_Drill.y;
}
else /* vertical */
{
delta_cx = 0;
delta_cy = halfsize.y - halfsize.x;
seg_width = m_Drill.x;
}
RotatePoint( &delta_cx, &delta_cy, angle );
GRFillCSegm( aClipBox, aDC, holepos.x + delta_cx, holepos.y + delta_cy,
holepos.x - delta_cx, holepos.y - delta_cy, seg_width,
hole_color );
break;
default:
break;
}
if( aDrawInfo.m_IsPrinting )
GRForceBlackPen( blackpenstate );
}
GRSetDrawMode( aDC, aDrawInfo.m_DrawMode );
/* Draw "No connect" ( / or \ or cross X ) if necessary. : */
if( m_Netname.IsEmpty() && aDrawInfo.m_ShowNCMark )
{
int dx0 = MIN( halfsize.x, halfsize.y );
int nc_color = BLUE;
if( m_layerMask & LAYER_FRONT ) /* Draw \ */
GRLine( aClipBox, aDC, holepos.x - dx0, holepos.y - dx0,
holepos.x + dx0, holepos.y + dx0, 0, nc_color );
if( m_layerMask & LAYER_BACK ) /* Draw / */
GRLine( aClipBox, aDC, holepos.x + dx0, holepos.y - dx0,
holepos.x - dx0, holepos.y + dx0, 0, nc_color );
}
/* Draw the pad number */
if( !aDrawInfo.m_Display_padnum && !aDrawInfo.m_Display_netname )
return;
wxPoint tpos0 = shape_pos; // Position of the centre of text
wxPoint tpos = tpos0;
wxSize AreaSize; // size of text area, normalized to AreaSize.y < AreaSize.x
int shortname_len = m_ShortNetname.Len();
if( !aDrawInfo.m_Display_netname )
shortname_len = 0;
if( GetShape() == PAD_CIRCLE )
angle = 0;
AreaSize = m_Size;
if( m_Size.y > m_Size.x )
{
angle += 900;
AreaSize.x = m_Size.y;
AreaSize.y = m_Size.x;
}
if( shortname_len > 0 ) // if there is a netname, provides room to display this netname
{
AreaSize.y /= 2; // Text used only the upper area of the
// pad. The lower area displays the net name
tpos.y -= AreaSize.y / 2;
}
// Calculate the position of text, that is the middle point of the upper
// area of the pad
RotatePoint( &tpos, shape_pos, angle );
/* Draw text with an angle between -90 deg and + 90 deg */
int t_angle = angle;
NORMALIZE_ANGLE_90( t_angle );
/* Note: in next calculations, texte size is calculated for 3 or more
* chars. Of course, pads numbers and nets names can have less than 3
* chars. but after some tries, i found this is gives the best look
*/
#define MIN_CHAR_COUNT 3
wxString buffer;
int tsize;
if( aDrawInfo.m_Display_padnum )
{
ReturnStringPadName( buffer );
int numpad_len = buffer.Len();
numpad_len = MAX( numpad_len, MIN_CHAR_COUNT );
tsize = min( AreaSize.y, AreaSize.x / numpad_len );
#define CHAR_SIZE_MIN 5
if( aDC->LogicalToDeviceXRel( tsize ) >= CHAR_SIZE_MIN ) // Not drawable when size too small.
{
// tsize reserve room for marges and segments thickness
tsize = (int) ( tsize * 0.8 );
DrawGraphicText( aDrawInfo.m_DrawPanel, aDC, tpos, WHITE, buffer, t_angle,
wxSize( tsize, tsize ), GR_TEXT_HJUSTIFY_CENTER,
GR_TEXT_VJUSTIFY_CENTER, tsize / 7, false, false );
}
}
// display the short netname, if exists
if( shortname_len == 0 )
return;
shortname_len = MAX( shortname_len, MIN_CHAR_COUNT );
tsize = min( AreaSize.y, AreaSize.x / shortname_len );
if( aDC->LogicalToDeviceXRel( tsize ) >= CHAR_SIZE_MIN ) // Not drawable in size too small.
{
tpos = tpos0;
if( aDrawInfo.m_Display_padnum )
tpos.y += AreaSize.y / 2;
RotatePoint( &tpos, shape_pos, angle );
// tsize reserve room for marges and segments thickness
tsize = (int) ( tsize * 0.8 );
DrawGraphicText( aDrawInfo.m_DrawPanel, aDC, tpos, WHITE, m_ShortNetname, t_angle,
wxSize( tsize, tsize ), GR_TEXT_HJUSTIFY_CENTER,
GR_TEXT_VJUSTIFY_CENTER, tsize / 7, false, false );
}
}
