void gluPerspective( GLdouble fovy,
GLdouble aspect,
GLdouble zNear,
GLdouble zFar ) {
guPerspective(perspective, fovy, aspect, zNear, zFar);
GX_LoadProjectionMtx(perspective, GX_PERSPECTIVE);
}
/****************************************************************************
* Menu_DrawImg
*
* Draws the specified image on screen using GX
***************************************************************************/
void Menu_DrawImg(f32 xpos, f32 ypos, f32 zpos, f32 width, f32 height, u8 data[], f32 degrees, f32 scaleX, f32 scaleY,
u8 alpha, int XX1, int YY1, int XX2, int YY2, int XX3, int YY3, int XX4, int YY4)
{
if (data == NULL) return;
GX_LoadProjectionMtx(FSProjection2D, GX_ORTHOGRAPHIC);
GXTexObj texObj;
GX_InitTexObj(&texObj, data, width, height, GX_TF_RGBA8, GX_CLAMP, GX_CLAMP, GX_FALSE);
GX_LoadTexObj(&texObj, GX_TEXMAP0);
GX_ClearVtxDesc();
GX_InvVtxCache();
GX_InvalidateTexAll();
GX_SetVtxDesc(GX_VA_POS, GX_DIRECT);
GX_SetVtxDesc(GX_VA_CLR0, GX_DIRECT);
GX_SetVtxDesc(GX_VA_TEX0, GX_DIRECT);
Mtx m, m1, m2, mv;
width *= 0.5f;
height *= 0.5f;
guMtxIdentity(m1);
guMtxScaleApply(m1, m1, scaleX, scaleY, 1.0f);
guVector axis = (guVector) {0 , 0, 1};
guMtxRotAxisDeg (m2, &axis, degrees);
guMtxConcat(m1, m2, m);
guMtxTransApply(m, m, xpos + width + 0.5f, ypos + height + 0.5f, zpos);
guMtxConcat(FSModelView2D, m, mv);
GX_LoadPosMtxImm(mv, GX_PNMTX0);
GX_Begin(GX_QUADS, GX_VTXFMT0, 4);
GX_Position3f32(-width + XX1, -height + YY1, 0);
GX_Color4u8(0xFF, 0xFF, 0xFF, alpha);
GX_TexCoord2f32(0, 0);
GX_Position3f32(width + XX2, -height + YY2, 0);
GX_Color4u8(0xFF, 0xFF, 0xFF, alpha);
GX_TexCoord2f32(1, 0);
GX_Position3f32(width + XX3, height + YY3, 0);
GX_Color4u8(0xFF, 0xFF, 0xFF, alpha);
GX_TexCoord2f32(1, 1);
GX_Position3f32(-width + XX4, height + YY4, 0);
GX_Color4u8(0xFF, 0xFF, 0xFF, alpha);
GX_TexCoord2f32(0, 1);
GX_End();
}
void drawInit()
{
Mtx44 GXprojection2D;
Mtx GXmodelView2D;
// Reset various parameters from gfx plugin
GX_SetCoPlanar(GX_DISABLE);
GX_SetClipMode(GX_CLIP_ENABLE);
// GX_SetScissor(0,0,vmode->fbWidth,vmode->efbHeight);
GX_SetAlphaCompare(GX_ALWAYS,0,GX_AOP_AND,GX_ALWAYS,0);
guMtxIdentity(GXmodelView2D);
GX_LoadTexMtxImm(GXmodelView2D,GX_TEXMTX0,GX_MTX2x4);
GX_LoadPosMtxImm(GXmodelView2D,GX_PNMTX0);
guOrtho(GXprojection2D, 0, 479, 0, 639, 0, 700);
GX_LoadProjectionMtx(GXprojection2D, GX_ORTHOGRAPHIC);
// GX_SetViewport (0, 0, vmode->fbWidth, vmode->efbHeight, 0, 1);
GX_SetZMode(GX_DISABLE,GX_ALWAYS,GX_TRUE);
GX_ClearVtxDesc();
GX_SetVtxDesc(GX_VA_PTNMTXIDX, GX_PNMTX0);
GX_SetVtxDesc(GX_VA_TEX0MTXIDX, GX_TEXMTX0);
GX_SetVtxDesc(GX_VA_POS, GX_DIRECT);
GX_SetVtxDesc(GX_VA_CLR0, GX_DIRECT);
GX_SetVtxDesc(GX_VA_TEX0, GX_DIRECT);
//set vertex attribute formats here
GX_SetVtxAttrFmt(GX_VTXFMT0, GX_VA_POS, GX_POS_XYZ, GX_F32, 0);
GX_SetVtxAttrFmt(GX_VTXFMT0, GX_VA_NRM, GX_NRM_XYZ, GX_F32, 0);
GX_SetVtxAttrFmt(GX_VTXFMT0, GX_VA_CLR0, GX_CLR_RGBA, GX_RGBA8, 0);
GX_SetVtxAttrFmt(GX_VTXFMT0, GX_VA_TEX0, GX_TEX_ST, GX_F32, 0);
//enable textures
GX_SetNumChans (1);
GX_SetNumTexGens (1);
GX_SetTexCoordGen(GX_TEXCOORD0, GX_TG_MTX2x4, GX_TG_TEX0, GX_IDENTITY);
GX_SetNumTevStages (1);
GX_SetTevOrder (GX_TEVSTAGE0, GX_TEXCOORD0, GX_TEXMAP0, GX_COLOR0A0);
GX_SetTevOp (GX_TEVSTAGE0, GX_PASSCLR);
//set blend mode
GX_SetBlendMode(GX_BM_BLEND, GX_BL_SRCALPHA, GX_BL_INVSRCALPHA, GX_LO_CLEAR); //Fix src alpha
GX_SetColorUpdate(GX_ENABLE);
// GX_SetAlphaUpdate(GX_ENABLE);
// GX_SetDstAlpha(GX_DISABLE, 0xFF);
//set cull mode
GX_SetCullMode (GX_CULL_NONE);
}
/****************************************************************************
* Menu_DrawRectangle
*
* Draws a rectangle at the specified coordinates using GX
***************************************************************************/
void Menu_DrawRectangle(f32 x, f32 y, f32 width, f32 height, GXColor color, u8 filled)
{
GX_LoadProjectionMtx(FSProjection2D, GX_ORTHOGRAPHIC);
GX_LoadPosMtxImm(FSModelView2D, GX_PNMTX0);
GX_SetTevOp(GX_TEVSTAGE0, GX_PASSCLR);
GX_ClearVtxDesc();
GX_InvVtxCache();
GX_SetVtxDesc(GX_VA_POS, GX_DIRECT);
GX_SetVtxDesc(GX_VA_CLR0, GX_DIRECT);
GX_SetVtxDesc(GX_VA_TEX0, GX_NONE);
u8 fmt;
long n;
int i;
f32 x2 = x + width;
f32 y2 = y + height;
guVector v[] = { { x, y, 0.0f }, { x2, y, 0.0f }, { x2, y2, 0.0f }, { x, y2, 0.0f }, { x, y, 0.0f } };
if (!filled)
{
fmt = GX_LINESTRIP;
n = 5;
}
else
{
fmt = GX_TRIANGLEFAN;
n = 4;
}
GX_Begin(fmt, GX_VTXFMT0, n);
for (i = 0; i < n; i++)
{
GX_Position3f32(v[i].x, v[i].y, v[i].z);
GX_Color4u8(color.r, color.g, color.b, color.a);
}
GX_End();
GX_SetTevOp(GX_TEVSTAGE0, GX_MODULATE);
}
static void init_vtx(GXRModeObj *mode)
{
GX_SetViewport(0, 0, mode->fbWidth, mode->efbHeight, 0, 1);
GX_SetDispCopyYScale(GX_GetYScaleFactor(mode->efbHeight, mode->xfbHeight));
GX_SetScissor(0, 0, mode->fbWidth, mode->efbHeight);
GX_SetDispCopySrc(0, 0, mode->fbWidth, mode->efbHeight);
GX_SetDispCopyDst(mode->fbWidth, mode->xfbHeight);
GX_SetCopyFilter(mode->aa, mode->sample_pattern, (mode->xfbMode == VI_XFBMODE_SF) ? GX_FALSE : GX_TRUE,
mode->vfilter);
GX_SetCopyClear((GXColor) { 0, 0, 0, 0xff }, GX_MAX_Z24);
GX_SetFieldMode(mode->field_rendering, (mode->viHeight == 2 * mode->xfbHeight) ? GX_ENABLE : GX_DISABLE);
GX_SetPixelFmt(GX_PF_RGB8_Z24, GX_ZC_LINEAR);
GX_SetZMode(GX_ENABLE, GX_ALWAYS, GX_ENABLE);
GX_SetColorUpdate(GX_TRUE);
GX_SetAlphaUpdate(GX_FALSE);
Mtx44 m;
guOrtho(m, 1, -1, -1, 1, 0.4, 0.6);
GX_LoadProjectionMtx(m, GX_ORTHOGRAPHIC);
GX_ClearVtxDesc();
GX_SetVtxDesc(GX_VA_POS, GX_INDEX8);
GX_SetVtxDesc(GX_VA_TEX0, GX_INDEX8);
GX_SetVtxAttrFmt(GX_VTXFMT0, GX_VA_POS, GX_POS_XYZ, GX_F32, 0);
GX_SetVtxAttrFmt(GX_VTXFMT0, GX_VA_TEX0, GX_TEX_ST, GX_F32, 0);
GX_SetArray(GX_VA_POS, verts, 3 * sizeof(float));
GX_SetArray(GX_VA_TEX0, tex_coords, 2 * sizeof(float));
GX_SetNumTexGens(1);
GX_SetNumChans(0);
GX_SetTevOp(GX_TEVSTAGE0, GX_REPLACE);
GX_SetTevOrder(GX_TEVSTAGE0, GX_TEXCOORD0, GX_TEXMAP0, GX_COLORNULL);
GX_InvVtxCache();
GX_Flush();
}
static int drawgx_window_create(sdl_window_info *window, int width, int height)
{
sdl_info *sdl = window->dxdata;
u32 xfbHeight;
f32 yscale;
Mtx44 perspective;
Mtx GXmodelView2D;
GXColor background = {0, 0, 0, 0xff};
currfb = 0;
// allocate memory for our structures
sdl = malloc(sizeof(*sdl));
memset(sdl, 0, sizeof(*sdl));
window->dxdata = sdl;
sdl->scale_mode = &scale_modes[window->scale_mode];
sdl->extra_flags = (window->fullscreen ? SDL_FULLSCREEN : SDL_RESIZABLE);
sdl->extra_flags |= sdl->scale_mode->extra_flags;
/*sdl->sdlsurf = SDL_SetVideoMode(width, height,
0, SDL_SWSURFACE | SDL_ANYFORMAT | sdl->extra_flags);*/
//sdl->sdlsurf = SDL_SetVideoMode(640, 480, 32, SDL_DOUBLEBUF);
//if (!sdl->sdlsurf)
// return 1;
window->width = gx_screenWidth();//sdl->sdlsurf->w;
window->height = 480;//sdl->sdlsurf->h;
sdl->safe_hofs = (window->width - window->width * options_get_float(mame_options(), SDLOPTVAL_SAFEAREA)) / 2;
sdl->safe_vofs = (window->height - window->height * options_get_float(mame_options(), SDLOPTVAL_SAFEAREA)) / 2;
/*if (sdl->scale_mode->is_yuv)
yuv_overlay_init(window);*/
sdl->yuv_lookup = NULL;
sdl->blittimer = 0;
//if (is_inited) return 0;
//is_inited = 1;
//drawgx_yuv_init(sdl);
//SDL_QuitSubSystem(SDL_INIT_VIDEO);
if (is_inited) return 0;
is_inited = 1;
VIDEO_Init();
VIDEO_SetBlack(true);
vmode = VIDEO_GetPreferredMode(NULL);
switch (vmode->viTVMode >> 2)
{
case VI_PAL:
vmode = &TVPal574IntDfScale;
vmode->xfbHeight = 480;
vmode->viYOrigin = (VI_MAX_HEIGHT_PAL - 480)/2;
vmode->viHeight = 480;
break;
case VI_NTSC:
break;
default:
break;
}
VIDEO_Configure(vmode);
xfb[0] = MEM_K0_TO_K1(SYS_AllocateFramebuffer(vmode));
xfb[1] = MEM_K0_TO_K1(SYS_AllocateFramebuffer(vmode));
VIDEO_ClearFrameBuffer(vmode, xfb[0], COLOR_BLACK);
VIDEO_ClearFrameBuffer(vmode, xfb[1], COLOR_BLACK);
VIDEO_SetNextFramebuffer(xfb[currfb]);
VIDEO_Flush();
VIDEO_WaitVSync();
if (vmode->viTVMode & VI_NON_INTERLACE) VIDEO_WaitVSync();
else while (VIDEO_GetNextField()) VIDEO_WaitVSync();
gp_fifo = memalign(32, DEFAULT_FIFO_SIZE);
memset(gp_fifo, 0, DEFAULT_FIFO_SIZE);
GX_Init(gp_fifo, DEFAULT_FIFO_SIZE);
atexit(drawgx_shutdown);
GX_SetCopyClear(background, 0x00ffffff);
// other gx setup
GX_SetViewport(0,0,vmode->fbWidth,vmode->efbHeight,0,1);
yscale = GX_GetYScaleFactor(vmode->efbHeight,vmode->xfbHeight);
xfbHeight = GX_SetDispCopyYScale(yscale);
GX_SetScissor(0,0,vmode->fbWidth,vmode->efbHeight);
GX_SetDispCopySrc(0,0,vmode->fbWidth,vmode->efbHeight);
GX_SetDispCopyDst(vmode->fbWidth,xfbHeight);
GX_SetCopyFilter(vmode->aa,vmode->sample_pattern,GX_TRUE,vmode->vfilter);
GX_SetFieldMode(vmode->field_rendering,((vmode->viHeight==2*vmode->xfbHeight)?GX_ENABLE:GX_DISABLE));
if (vmode->aa)
GX_SetPixelFmt(GX_PF_RGB565_Z16, GX_ZC_LINEAR);
else
GX_SetPixelFmt(GX_PF_RGB8_Z24, GX_ZC_LINEAR);
GX_SetCullMode(GX_CULL_NONE);
GX_CopyDisp(xfb[currfb],GX_TRUE);
GX_SetDispCopyGamma(GX_GM_1_0);
GX_SetNumChans(1);
GX_SetNumTexGens(1);
GX_SetTevOp(GX_TEVSTAGE0, GX_MODULATE);
GX_SetTexCoordGen(GX_TEXCOORD0, GX_TG_MTX2x4, GX_TG_TEX0, GX_IDENTITY);
GX_SetZMode(GX_TRUE, GX_LEQUAL, GX_TRUE);
GX_SetBlendMode(GX_BM_BLEND, GX_BL_SRCALPHA, GX_BL_INVSRCALPHA, GX_LO_CLEAR);
GX_SetAlphaUpdate(GX_TRUE);
GX_SetColorUpdate(GX_TRUE);
guOrtho(perspective,0,479,0,gx_screenWidth()-1,0,300);
GX_LoadProjectionMtx(perspective, GX_ORTHOGRAPHIC);
guMtxIdentity(GXmodelView2D);
guMtxTransApply (GXmodelView2D, GXmodelView2D, 0.0F, 0.0F, -5.0F);
GX_LoadPosMtxImm(GXmodelView2D,GX_PNMTX0);
GX_SetViewport(0,0,vmode->fbWidth,vmode->efbHeight,0,1);
GX_InvVtxCache();
GX_ClearVtxDesc();
GX_InvalidateTexAll();
GX_SetVtxAttrFmt(GX_VTXFMT0, GX_VA_POS, GX_POS_XY, GX_F32, 0);
GX_SetVtxAttrFmt(GX_VTXFMT0, GX_VA_TEX0, GX_TEX_ST, GX_F32, 0);
GX_SetVtxAttrFmt(GX_VTXFMT0, GX_VA_CLR0, GX_CLR_RGBA, GX_RGBA8, 0);
GX_SetVtxDesc(GX_VA_POS, GX_DIRECT);
GX_SetVtxDesc(GX_VA_CLR0, GX_DIRECT);
GX_SetVtxDesc(GX_VA_TEX0, GX_DIRECT);
GX_SetTevOrder(GX_TEVSTAGE0, GX_TEXCOORD0, GX_TEXMAP0, GX_COLOR0A0);
VIDEO_SetBlack(false);
GX_InitTexObj(&blankTex, blanktex, 1, 1, GX_TF_RGB5A3, GX_CLAMP, GX_CLAMP, GX_FALSE);
return 0;
}
void Menu_DrawDiskCover(f32 xpos, f32 ypos, f32 zpos, u16 width, u16 height, u16 distance, u8 data[], f32 deg_alpha,
f32 deg_beta, f32 scaleX, f32 scaleY, u8 alpha, bool shadow)
{
if (data == NULL) return;
GX_LoadProjectionMtx(FSProjection2D, GX_ORTHOGRAPHIC);
GXTexObj texObj;
GX_InitTexObj(&texObj, data, width, height, GX_TF_RGBA8, GX_CLAMP, GX_CLAMP, GX_FALSE);
GX_LoadTexObj(&texObj, GX_TEXMAP0);
GX_ClearVtxDesc();
GX_InvVtxCache();
GX_InvalidateTexAll();
GX_SetVtxDesc(GX_VA_POS, GX_DIRECT);
GX_SetVtxDesc(GX_VA_CLR0, GX_DIRECT);
GX_SetVtxDesc(GX_VA_TEX0, GX_DIRECT);
f32 cos_beta = cos(DegToRad( deg_beta ));
f32 s_offset_y = (zpos + (cos_beta * distance)) * tan(DegToRad( 5 ));
f32 s_offset_x = (cos_beta < 0 ? -cos_beta : cos_beta) * s_offset_y;
f32 s_offset_z = (s_offset_y < 0 ? 0 : s_offset_y) * 2;
Mtx m, m1, m2, m3, m4, mv;
width *= .5;
height *= .5;
guMtxIdentity(m4);
guMtxTransApply(m4, m4, 0, 0, distance);
guMtxIdentity(m1);
guMtxScaleApply(m1, m1, scaleX, scaleY, 1.0);
guVector axis2 = (guVector) {0 , 1, 0};
guMtxRotAxisDeg ( m2, &axis2, deg_beta );
guVector axis = (guVector) {0 , 0, 1};
guMtxRotAxisDeg ( m3, &axis, deg_alpha );
guMtxConcat(m3, m4, m3); // move distance then rotate z-axis
guMtxConcat(m2, m3, m2); // rotate y-axis
guMtxConcat(m1, m2, m); // scale
if (shadow)
guMtxTransApply(m, m, xpos + width + 0.5 + s_offset_x, ypos + height + 0.5 + s_offset_y, zpos - s_offset_z);
else
guMtxTransApply(m, m, xpos + width + 0.5, ypos + height + 0.5, zpos);
guMtxConcat(FSModelView2D, m, mv);
GX_LoadPosMtxImm(mv, GX_PNMTX0);
GX_Begin(GX_QUADS, GX_VTXFMT0, 4);
if (shadow)
{
GX_Position3f32(-width, -height, 0);
GX_Color4u8(0, 0, 0, alpha);
GX_TexCoord2f32(0, 0);
GX_Position3f32(width, -height, 0);
GX_Color4u8(0, 0, 0, alpha);
GX_TexCoord2f32(1, 0);
GX_Position3f32(width, height, 0);
GX_Color4u8(0, 0, 0, alpha);
GX_TexCoord2f32(1, 1);
GX_Position3f32(-width, height, 0);
GX_Color4u8(0, 0, 0, alpha);
GX_TexCoord2f32(0, 1);
}
else
{
GX_Position3f32(-width, -height, 0);
GX_Color4u8(0xFF, 0xFF, 0xFF, alpha);
GX_TexCoord2f32(0, 0);
GX_Position3f32(width, -height, 0);
GX_Color4u8(0xFF, 0xFF, 0xFF, alpha);
GX_TexCoord2f32(1, 0);
GX_Position3f32(width, height, 0);
GX_Color4u8(0xFF, 0xFF, 0xFF, alpha);
GX_TexCoord2f32(1, 1);
GX_Position3f32(-width, height, 0);
GX_Color4u8(0xFF, 0xFF, 0xFF, alpha);
GX_TexCoord2f32(0, 1);
}
GX_End();
}
void BoxCover::Draw()
{
u8 BoxAlpha = (int) (alpha+alphaDyn) & 0xFF;
GX_LoadProjectionMtx(projection, GX_PERSPECTIVE);
GX_ClearVtxDesc();
GX_InvVtxCache();
GX_SetVtxDesc(GX_VA_POS, GX_INDEX8);
GX_SetVtxDesc(GX_VA_CLR0, GX_DIRECT);
GX_SetVtxDesc(GX_VA_TEX0, GX_INDEX8);
//! don't draw inside of the box
GX_SetCullMode(GX_CULL_FRONT);
Mtx modelView;
Mtx modelView2;
Mtx modelView3;
guVector cubeAxis = {0,0,1};
guVector cubeAxis2 = {0,1,0};
guVector cubeAxis3 = {1,0,0};
guMtxIdentity(modelView);
guMtxRotAxisDeg(modelView3, &cubeAxis3, RotX-Animation2);
guMtxRotAxisDeg(modelView2, &cubeAxis2, RotY+Animation2+xoffsetDyn/2.0f);
guMtxRotAxisDeg(modelView, &cubeAxis, RotZ-Animation);
guMtxConcat(modelView3, modelView2, modelView2);
guMtxConcat(modelView2, modelView, modelView);
if(Settings.widescreen)
guMtxScaleApply(modelView, modelView, Settings.WSFactor, 1.0f, 1.0f);
guMtxTransApply(modelView, modelView, PosX+xoffsetDyn/680.0f+movePosX, PosY+yoffsetDyn/680.0f+movePosY, PosZ);
guMtxConcat(view,modelView,modelView);
GX_LoadPosMtxImm(modelView, GX_PNMTX0);
//! Border quads
GX_LoadTexObj(&boxBorderTex, GX_TEXMAP0);
GX_InvalidateTexAll();
GX_SetArray(GX_VA_POS, (void *) &g_boxMeshQ[0].pos, sizeof(g_boxMeshQ[0]));
GX_SetArray(GX_VA_TEX0, (void *) &g_boxMeshQ[0].texCoord, sizeof(g_boxMeshQ[0]));
GX_Begin(GX_QUADS, GX_VTXFMT0, g_boxMeshQSize);
for (u32 j = 0; j < g_boxMeshQSize; ++j)
{
GX_Position1x8(j);
GX_Color4u8(boxColor.r, boxColor.g, boxColor.b, BoxAlpha);
GX_TexCoord1x8(j);
}
GX_End();
//! Border triangles
GX_SetArray(GX_VA_POS, (void *) &g_boxMeshT[0].pos, sizeof(g_boxMeshT[0]));
GX_SetArray(GX_VA_TEX0, (void *) &g_boxMeshT[0].texCoord, sizeof(g_boxMeshT[0]));
GX_Begin(GX_TRIANGLES, GX_VTXFMT0, g_boxMeshTSize);
for (u32 j = 0; j < g_boxMeshTSize; ++j)
{
GX_Position1x8(j);
GX_Color4u8(boxColor.r, boxColor.g, boxColor.b, BoxAlpha);
GX_TexCoord1x8(j);
}
GX_End();
//! Back Cover (Might be flat)
GX_LoadTexObj(flatCover ? &defaultBoxTex : &coverTex, GX_TEXMAP0);
GX_InvalidateTexAll();
GX_SetArray(GX_VA_POS, (void *) &g_boxBackCoverMesh[0].pos, sizeof(g_boxBackCoverMesh[0]));
GX_SetArray(GX_VA_TEX0, (void *) &g_boxBackCoverMesh[0].texCoord, sizeof(g_boxBackCoverMesh[0]));
GX_Begin(GX_QUADS, GX_VTXFMT0, g_boxBackCoverMeshSize);
for (u32 j = 0; j < g_boxBackCoverMeshSize; ++j)
{
GX_Position1x8(j);
if(flatCover)
GX_Color4u8(boxColor.r, boxColor.g, boxColor.b, BoxAlpha);
else
GX_Color4u8(0xff, 0xff, 0xff, BoxAlpha);
GX_TexCoord1x8(j);
}
GX_End();
if(flatCover)
{
//! Front Flat Cover
GX_LoadTexObj(&coverTex, GX_TEXMAP0);
GX_InvalidateTexAll();
GX_SetArray(GX_VA_POS, (void *) &g_flatCoverMesh[0].pos, sizeof(g_flatCoverMesh[0]));
GX_SetArray(GX_VA_TEX0, (void *) &g_flatCoverMesh[0].texCoord, sizeof(g_flatCoverMesh[0]));
GX_Begin(GX_QUADS, GX_VTXFMT0, g_flatCoverMeshSize);
for (u32 j = 0; j < g_flatCoverMeshSize; ++j)
{
GX_Position1x8(j);
GX_Color4u8(0xff, 0xff, 0xff, 0xff);
GX_TexCoord1x8(j);
}
GX_End();
}
else
{
//! Front Cover
GX_SetArray(GX_VA_POS, (void *) &g_boxCoverMesh[0].pos, sizeof(g_boxCoverMesh[0]));
GX_SetArray(GX_VA_TEX0, (void *) &g_boxCoverMesh[0].texCoord, sizeof(g_boxCoverMesh[0]));
GX_Begin(GX_QUADS, GX_VTXFMT0, g_boxCoverMeshSize);
for (u32 j = 0; j < g_boxCoverMeshSize; ++j)
{
GX_Position1x8(j);
GX_Color4u8(0xff, 0xff, 0xff, BoxAlpha);
GX_TexCoord1x8(j);
}
GX_End();
}
//! stop cull
GX_SetCullMode(GX_CULL_NONE);
UpdateEffects();
}
//---------------------------------------------------------------------------------
int main( int argc, char **argv ){
//---------------------------------------------------------------------------------
u32 fb; // initial framebuffer index
u32 first_frame;
f32 yscale;
u32 xfbHeight;
Mtx44 perspective;
Mtx GXmodelView2D;
void *gp_fifo = NULL;
GXColor background = {0, 0, 0, 0xff};
int i;
VIDEO_Init();
rmode = VIDEO_GetPreferredMode(NULL);
fb = 0;
first_frame = 1;
// allocate 2 framebuffers for double buffering
frameBuffer[0] = MEM_K0_TO_K1(SYS_AllocateFramebuffer(rmode));
frameBuffer[1] = MEM_K0_TO_K1(SYS_AllocateFramebuffer(rmode));
VIDEO_Configure(rmode);
VIDEO_SetNextFramebuffer(frameBuffer[fb]);
VIDEO_SetBlack(FALSE);
VIDEO_Flush();
VIDEO_WaitVSync();
if(rmode->viTVMode&VI_NON_INTERLACE) VIDEO_WaitVSync();
fb ^= 1;
// setup the fifo and then init the flipper
gp_fifo = memalign(32,DEFAULT_FIFO_SIZE);
memset(gp_fifo,0,DEFAULT_FIFO_SIZE);
GX_Init(gp_fifo,DEFAULT_FIFO_SIZE);
// clears the bg to color and clears the z buffer
GX_SetCopyClear(background, 0x00ffffff);
// other gx setup
GX_SetViewport(0,0,rmode->fbWidth,rmode->efbHeight,0,1);
yscale = GX_GetYScaleFactor(rmode->efbHeight,rmode->xfbHeight);
xfbHeight = GX_SetDispCopyYScale(yscale);
GX_SetScissor(0,0,rmode->fbWidth,rmode->efbHeight);
GX_SetDispCopySrc(0,0,rmode->fbWidth,rmode->efbHeight);
GX_SetDispCopyDst(rmode->fbWidth,xfbHeight);
GX_SetCopyFilter(rmode->aa,rmode->sample_pattern,GX_TRUE,rmode->vfilter);
GX_SetFieldMode(rmode->field_rendering,((rmode->viHeight==2*rmode->xfbHeight)?GX_ENABLE:GX_DISABLE));
if (rmode->aa)
GX_SetPixelFmt(GX_PF_RGB565_Z16, GX_ZC_LINEAR);
else
GX_SetPixelFmt(GX_PF_RGB8_Z24, GX_ZC_LINEAR);
GX_SetCullMode(GX_CULL_NONE);
GX_CopyDisp(frameBuffer[fb],GX_TRUE);
GX_SetDispCopyGamma(GX_GM_1_0);
// setup the vertex descriptor
// tells the flipper to expect direct data
GX_SetVtxAttrFmt(GX_VTXFMT0, GX_VA_POS, GX_POS_XY, GX_F32, 0);
GX_SetVtxAttrFmt(GX_VTXFMT0, GX_VA_TEX0, GX_TEX_ST, GX_F32, 0);
GX_SetNumChans(1);
GX_SetNumTexGens(1);
GX_SetTevOp(GX_TEVSTAGE0, GX_REPLACE);
GX_SetTevOrder(GX_TEVSTAGE0, GX_TEXCOORD0, GX_TEXMAP0, GX_COLOR0A0);
GX_SetTexCoordGen(GX_TEXCOORD0, GX_TG_MTX2x4, GX_TG_TEX0, GX_IDENTITY);
GX_InvalidateTexAll();
TPLFile spriteTPL;
TPL_OpenTPLFromMemory(&spriteTPL, (void *)textures_tpl,textures_tpl_size);
TPL_GetTexture(&spriteTPL,ballsprites,&texObj);
GX_LoadTexObj(&texObj, GX_TEXMAP0);
guOrtho(perspective,0,479,0,639,0,300);
GX_LoadProjectionMtx(perspective, GX_ORTHOGRAPHIC);
PAD_Init();
srand(time(NULL));
for(i = 0; i < NUM_SPRITES; i++) {
//random place and speed
sprites[i].x = (rand() % (640 - 32 )) << 8;
sprites[i].y = (rand() % (480 - 32 )) << 8 ;
sprites[i].dx = (rand() & 0xFF) + 0x100;
sprites[i].dy = (rand() & 0xFF) + 0x100;
sprites[i].image = rand() & 3;
if(rand() & 1)
sprites[i].dx = -sprites[i].dx;
if(rand() & 1)
sprites[i].dy = -sprites[i].dy;
}
GX_SetViewport(0,0,rmode->fbWidth,rmode->efbHeight,0,1);
guMtxIdentity(GXmodelView2D);
guMtxTransApply (GXmodelView2D, GXmodelView2D, 0.0F, 0.0F, -5.0F);
GX_LoadPosMtxImm(GXmodelView2D,GX_PNMTX0);
GX_SetZMode(GX_TRUE, GX_LEQUAL, GX_TRUE);
GX_SetBlendMode(GX_BM_BLEND, GX_BL_SRCALPHA, GX_BL_INVSRCALPHA, GX_LO_CLEAR);
GX_SetAlphaUpdate(GX_TRUE);
GX_SetColorUpdate(GX_TRUE);
while(1) {
PAD_ScanPads();
if (PAD_ButtonsDown(0) & PAD_BUTTON_START) exit(0);
GX_InvVtxCache();
GX_InvalidateTexAll();
GX_ClearVtxDesc();
GX_SetVtxDesc(GX_VA_POS, GX_DIRECT);
GX_SetVtxDesc(GX_VA_TEX0, GX_DIRECT);
for(i = 0; i < NUM_SPRITES; i++) {
sprites[i].x += sprites[i].dx;
sprites[i].y += sprites[i].dy;
//check for collision with the screen boundaries
if(sprites[i].x < (1<<8) || sprites[i].x > ((640-32) << 8))
sprites[i].dx = -sprites[i].dx;
if(sprites[i].y < (1<<8) || sprites[i].y > ((480-32) << 8))
sprites[i].dy = -sprites[i].dy;
drawSpriteTex( sprites[i].x >> 8, sprites[i].y >> 8, 32, 32, sprites[i].image);
}
GX_DrawDone();
GX_CopyDisp(frameBuffer[fb],GX_TRUE);
VIDEO_SetNextFramebuffer(frameBuffer[fb]);
if(first_frame) {
VIDEO_SetBlack(FALSE);
first_frame = 0;
}
VIDEO_Flush();
VIDEO_WaitVSync();
fb ^= 1; // flip framebuffer
}
return 0;
}
void WiiPointer::Draw(GuiTrigger *t)
{
if(t && pointerImg)
{
if(t->wpad.ir.valid)
{
lastActivity = 0;
posX = t->wpad.ir.x;
posY = t->wpad.ir.y;
angle = t->wpad.ir.angle;
}
else
{
angle = 0.0f;
// GC PAD
// x-axis
if(t->pad.stickX < -PADCAL)
{
posX += (t->pad.stickX + PADCAL) * Settings.PointerSpeed;
lastActivity = 0;
}
else if(t->pad.stickX > PADCAL)
{
posX += (t->pad.stickX - PADCAL) * Settings.PointerSpeed;
lastActivity = 0;
}
// y-axis
if(t->pad.stickY < -PADCAL)
{
posY -= (t->pad.stickY + PADCAL) * Settings.PointerSpeed;
lastActivity = 0;
}
else if(t->pad.stickY > PADCAL)
{
posY -= (t->pad.stickY - PADCAL) * Settings.PointerSpeed;
lastActivity = 0;
}
//Wii u pro x-axis
if(t->wupcdata.stickX < -WUPCCAL)
{
posX += (t->wupcdata.stickX + WUPCCAL) * Settings.PointerSpeed/8;
lastActivity = 0;
}
else if(t->wupcdata.stickX > WUPCCAL)
{
posX += (t->wupcdata.stickX - WUPCCAL) * Settings.PointerSpeed/8;
lastActivity = 0;
}
//Wii u pro y-axis
if(t->wupcdata.stickY < -WUPCCAL)
{
posY -= (t->wupcdata.stickY + WUPCCAL) * Settings.PointerSpeed/8;
lastActivity = 0;
}
else if(t->wupcdata.stickY > WUPCCAL)
{
posY -= (t->wupcdata.stickY - WUPCCAL) * Settings.PointerSpeed/8;
lastActivity = 0;
}
int wpadX = t->WPAD_Stick(0, 0);
int wpadY = t->WPAD_Stick(0, 1);
// Wii Extensions
// x-axis
if(wpadX < -PADCAL)
{
posX += (wpadX + PADCAL) * Settings.PointerSpeed;
lastActivity = 0;
}
else if(wpadX > PADCAL)
{
posX += (wpadX - PADCAL) * Settings.PointerSpeed;
lastActivity = 0;
}
// y-axis
if(wpadY < -PADCAL)
{
posY -= (wpadY + PADCAL) * Settings.PointerSpeed;
lastActivity = 0;
}
else if(wpadY > PADCAL)
{
posY -= (wpadY - PADCAL) * Settings.PointerSpeed;
lastActivity = 0;
}
if(t->pad.btns_h || t->wpad.btns_h || t->wupcdata.btns_h)
lastActivity = 0;
posX = LIMIT(posX, -50.0f, screenwidth+50.0f);
posY = LIMIT(posY, -50.0f, screenheight+50.0f);
if(lastActivity < 2) { // (3s on 60Hz and 3.6s on 50Hz)
t->wpad.ir.valid = 1;
t->wpad.ir.x = posX;
t->wpad.ir.y = posY;
}
}
if(t->wpad.ir.valid)
{
GXTexObj texObj;
GX_InitTexObj(&texObj, pointerImg->GetImage(), pointerImg->GetWidth(), pointerImg->GetHeight(), GX_TF_RGBA8, GX_CLAMP, GX_CLAMP, GX_FALSE);
GX_LoadTexObj(&texObj, GX_TEXMAP0);
GX_ClearVtxDesc();
GX_InvVtxCache();
GX_InvalidateTexAll();
GX_SetVtxDesc(GX_VA_POS, GX_DIRECT);
GX_SetVtxDesc(GX_VA_CLR0, GX_DIRECT);
GX_SetVtxDesc(GX_VA_TEX0, GX_DIRECT);
Mtx mv;
guMtxIdentity(mv);
guMtxRotDeg (mv, 'z', angle);
guMtxTransApply(mv, mv, posX, posY, 9900.f);
guMtxConcat(FSModelView2D, mv, mv);
GX_LoadProjectionMtx(projection, GX_ORTHOGRAPHIC);
GX_LoadPosMtxImm(mv, GX_PNMTX0);
// pointer is pointing to center of the texture
f32 width = 0.5f * pointerImg->GetWidth();
f32 height = 0.5f * pointerImg->GetHeight();
GX_Begin(GX_QUADS, GX_VTXFMT0, 4);
GX_Position3f32(-width, -height, 0);
GX_Color4u8(0xFF, 0xFF, 0xFF, 0xFF);
GX_TexCoord2f32(0, 0);
GX_Position3f32(width, -height, 0);
GX_Color4u8(0xFF, 0xFF, 0xFF, 0xFF);
GX_TexCoord2f32(1, 0);
GX_Position3f32(width, height, 0);
GX_Color4u8(0xFF, 0xFF, 0xFF, 0xFF);
GX_TexCoord2f32(1, 1);
GX_Position3f32(-width, height, 0);
GX_Color4u8(0xFF, 0xFF, 0xFF, 0xFF);
GX_TexCoord2f32(0, 1);
GX_End();
}
}
++lastActivity;
}
void BannerWindow::Draw(void)
{
if(!ShowBanner)
return;
// draw a black background image first
if(AnimStep >= MaxAnimSteps)
DrawRectangle(0.0f, 0.0f, m_vid.width(), m_vid.height(), (GXColor) {0, 0, 0, 0xFF});
if(changing)
return;
// Run window animation
Animate();
// cut the unneeded crap
Mtx mv1, mv2, mv3;
guMtxIdentity(mv2);
guMtxIdentity(mv3);
guMtxScaleApply(modelview,mv1, 1.f, -1.f, 1.f);
guMtxTransApply(mv1,mv1, 0.5f * ScreenProps.x, 0.5f * ScreenProps.y, 0.f);
guMtxTransApply(mv2,mv2, -0.5f * fBannerWidth, 0.5f * fBannerHeight, 0.f);
guMtxTransApply(mv3,mv3, 0.5f * fBannerWidth, -0.5f * fBannerHeight + 104.f, 0.f);
guMtxConcat(mv1, mv2, mv2);
guMtxConcat(mv1, mv3, mv3);
f32 viewportv[6];
f32 projectionv[7];
GX_GetViewportv(viewportv, m_vid.vid_mode());
GX_GetProjectionv(projectionv, projection, GX_ORTHOGRAPHIC);
guVector vecTL;
guVector vecBR;
GX_Project(0.0f, 0.0f, 0.0f, mv2, projectionv, viewportv, &vecTL.x, &vecTL.y, &vecTL.z);
GX_Project(0.0f, 0.0f, 0.0f, mv3, projectionv, viewportv, &vecBR.x, &vecBR.y, &vecBR.z);
// round up scissor box offset and round down the size
u32 scissorX = (u32)(0.5f + std::max(vecTL.x, 0.0f));
u32 scissorY = (u32)(0.5f + std::max(vecTL.y, 0.0f));
u32 scissorW = (u32)std::max(vecBR.x - vecTL.x, 0.0f);
u32 scissorH = (u32)std::max(vecBR.y - vecTL.y, 0.0f);
GX_SetScissor(scissorX, scissorY, scissorW, scissorH);
// load projection matrix
GX_LoadProjectionMtx(projection, GX_ORTHOGRAPHIC);
if(gameBanner.getBanner())
{
gameBanner.getBanner()->Render(modelview, ScreenProps, m_vid.wide(), 255.f);
gameBanner.getBanner()->AdvanceFrame();
}
// Setup GX
ReSetup_GX();
GX_SetScissor(0, 0, m_vid.width(), m_vid.height());
// Clear and back to previous projection
m_vid.setup2DProjection();
// If wanted
if(Brightness == 200)
DrawRectangle(0.0f, 0.0f, m_vid.width(), m_vid.height(), (GXColor) {0, 0, 0, Brightness});
}
void BannerWindow::Draw(void)
{
bool btnAGrow = (settingsBtn->GetState() == STATE_SELECTED || backBtn->GetState() == STATE_SELECTED);
bannerFrame.SetButtonAGrow(btnAGrow);
bannerFrame.SetButtonBGrow(startBtn->GetState() == STATE_SELECTED);
//! Start playing banner sound after last animation frame if animation after zoom is enabled
//! or on first frame if during zoom is enable
if( AnimZoomIn && gameSound && (((Settings.BannerAnimStart == BANNER_START_ON_ZOOM) && AnimStep == 0)
|| ((Settings.BannerAnimStart == BANNER_START_AFTER_ZOOM) && ((AnimStep + 1) == MaxAnimSteps))))
{
reducedVol = true;
gameSound->Play();
}
// Run window animation
Animate();
// draw a black background image first
Menu_DrawRectangle(0.0f, 0.0f, ScreenProps.x, ScreenProps.y, (GXColor) {0, 0, 0, BGAlpha}, true);
// no banner alpha means its the start of the animation
if(BannerAlpha == 0)
return;
// cut the unneeded stuff
Mtx mv1, mv2, mv3;
guMtxIdentity (mv2);
guMtxIdentity (mv3);
guMtxScaleApply(modelview,mv1, 1.f, -1.f, 1.f);
guMtxTransApply(mv1,mv1, 0.5f * ScreenProps.x, 0.5f * ScreenProps.y, 0.f);
guMtxTransApply(mv2,mv2, -0.5f * fBannerWidth, 0.5f * fBannerHeight, 0.f);
guMtxTransApply(mv3,mv3, 0.5f * fBannerWidth, -0.5f * fBannerHeight, 0.f);
guMtxConcat (mv1, mv2, mv2);
guMtxConcat (mv1, mv3, mv3);
f32 viewportv[6];
f32 projectionv[7];
GX_GetViewportv(viewportv, vmode);
GX_GetProjectionv(projectionv, projection, GX_ORTHOGRAPHIC);
guVector vecTL;
guVector vecBR;
GX_Project(0.0f, 0.0f, 0.0f, mv2, projectionv, viewportv, &vecTL.x, &vecTL.y, &vecTL.z);
GX_Project(0.0f, 0.0f, 0.0f, mv3, projectionv, viewportv, &vecBR.x, &vecBR.y, &vecBR.z);
// round up scissor box offset and round down the size
u32 scissorX = (u32)(0.5f + std::max(vecTL.x, 0.0f));
u32 scissorY = (u32)(0.5f + std::max(vecTL.y, 0.0f));
u32 scissorW = (u32)std::max(vecBR.x - vecTL.x, 0.0f);
u32 scissorH = (u32)std::max(vecBR.y - vecTL.y, 0.0f);
GX_SetScissor( scissorX, scissorY, scissorW, scissorH );
// load projection matrix
GX_LoadProjectionMtx(projection, GX_ORTHOGRAPHIC);
if(gameBanner->getBanner())
{
gameBanner->getBanner()->Render(modelview, ScreenProps, Settings.widescreen, BannerAlpha);
// advance only when animation isnt running on certain options
if(Settings.BannerAnimStart != BANNER_START_AFTER_ZOOM || !AnimationRunning)
{
gameBanner->getBanner()->AdvanceFrame();
// skip every 6th frame on PAL50 since all banners are 60 Hz
if(Settings.PAL50 && (frameCount % 6 == 0)) {
gameBanner->getBanner()->AdvanceFrame();
}
}
}
// render big frame and animate button over effects
bannerFrame.Render(modelview, ScreenProps, Settings.widescreen, BannerAlpha);
bannerFrame.AdvanceFrame();
// Setup GX
ReSetup_GX();
if(AnimationRunning) {
// remove scissors again as we draw the background layout too
GX_SetScissor(0, 0, vmode->fbWidth, vmode->efbHeight);
// only render gui stuff when animation is done
return;
}
GuiWindow::Draw();
}
//---------------------------------------------------------------------------------
int main( int argc, char **argv ){
//---------------------------------------------------------------------------------
f32 yscale;
u32 xfbHeight;
Mtx view;
Mtx44 perspective;
u32 fb = 0; // initial framebuffer index
GXColor background = {0, 0, 0, 0xff};
// init the vi.
VIDEO_Init();
WPAD_Init();
rmode = VIDEO_GetPreferredMode(NULL);
// allocate 2 framebuffers for double buffering
frameBuffer[0] = MEM_K0_TO_K1(SYS_AllocateFramebuffer(rmode));
frameBuffer[1] = MEM_K0_TO_K1(SYS_AllocateFramebuffer(rmode));
VIDEO_Configure(rmode);
VIDEO_SetNextFramebuffer(frameBuffer[fb]);
VIDEO_SetBlack(FALSE);
VIDEO_Flush();
VIDEO_WaitVSync();
if(rmode->viTVMode&VI_NON_INTERLACE) VIDEO_WaitVSync();
// setup the fifo and then init the flipper
void *gp_fifo = NULL;
gp_fifo = memalign(32,DEFAULT_FIFO_SIZE);
memset(gp_fifo,0,DEFAULT_FIFO_SIZE);
GX_Init(gp_fifo,DEFAULT_FIFO_SIZE);
// clears the bg to color and clears the z buffer
GX_SetCopyClear(background, 0x00ffffff);
// other gx setup
GX_SetViewport(0,0,rmode->fbWidth,rmode->efbHeight,0,1);
yscale = GX_GetYScaleFactor(rmode->efbHeight,rmode->xfbHeight);
xfbHeight = GX_SetDispCopyYScale(yscale);
GX_SetScissor(0,0,rmode->fbWidth,rmode->efbHeight);
GX_SetDispCopySrc(0,0,rmode->fbWidth,rmode->efbHeight);
GX_SetDispCopyDst(rmode->fbWidth,xfbHeight);
GX_SetCopyFilter(rmode->aa,rmode->sample_pattern,GX_TRUE,rmode->vfilter);
GX_SetFieldMode(rmode->field_rendering,((rmode->viHeight==2*rmode->xfbHeight)?GX_ENABLE:GX_DISABLE));
GX_SetCullMode(GX_CULL_NONE);
GX_CopyDisp(frameBuffer[fb],GX_TRUE);
GX_SetDispCopyGamma(GX_GM_1_0);
// setup our camera at the origin
// looking down the -z axis with y up
guVector cam = {0.0F, 0.0F, 0.0F},
up = {0.0F, 1.0F, 0.0F},
look = {0.0F, 0.0F, -1.0F};
guLookAt(view, &cam, &up, &look);
// setup our projection matrix
// this creates a perspective matrix with a view angle of 90,
// and aspect ratio based on the display resolution
f32 w = rmode->viWidth;
f32 h = rmode->viHeight;
guPerspective(perspective, 45, (f32)w/h, 0.1F, 300.0F);
GX_LoadProjectionMtx(perspective, GX_PERSPECTIVE);
while(1) {
WPAD_ScanPads();
if (WPAD_ButtonsDown(0) & WPAD_BUTTON_HOME) exit(0);
// do this before drawing
GX_SetViewport(0,0,rmode->fbWidth,rmode->efbHeight,0,1);
// do this stuff after drawing
GX_DrawDone();
fb ^= 1; // flip framebuffer
GX_SetZMode(GX_TRUE, GX_LEQUAL, GX_TRUE);
GX_SetColorUpdate(GX_TRUE);
GX_CopyDisp(frameBuffer[fb],GX_TRUE);
VIDEO_SetNextFramebuffer(frameBuffer[fb]);
VIDEO_Flush();
VIDEO_WaitVSync();
}
return 0;
}
//---------------------------------------------------------------------------------
int main( int argc, char **argv ){
//---------------------------------------------------------------------------------
f32 yscale;
u32 xfbHeight;
// various matrices for things like view
Mtx view,mv,mr;
Mtx44 perspective;
// the texure we're going to paint
GXTexObj texture;
TPLFile mudTPL;
u32 fb = 0; // initial framebuffer index
GXColor background = {0, 0, 0, 0xff};
// init the vi.
VIDEO_Init();
rmode = VIDEO_GetPreferredMode(NULL);
WPAD_Init();
// allocate 2 framebuffers for double buffering
frameBuffer[0] = MEM_K0_TO_K1(SYS_AllocateFramebuffer(rmode));
frameBuffer[1] = MEM_K0_TO_K1(SYS_AllocateFramebuffer(rmode));
// configure video and wait for the screen to blank
VIDEO_Configure(rmode);
VIDEO_SetNextFramebuffer(frameBuffer[fb]);
VIDEO_SetBlack(FALSE);
VIDEO_Flush();
VIDEO_WaitVSync();
if(rmode->viTVMode&VI_NON_INTERLACE) VIDEO_WaitVSync();
// setup the fifo...
void *gp_fifo = NULL;
gp_fifo = memalign(32,DEFAULT_FIFO_SIZE);
memset(gp_fifo,0,DEFAULT_FIFO_SIZE);
// ...then init the flipper
GX_Init(gp_fifo,DEFAULT_FIFO_SIZE);
// clears the bg to color and clears the z buffer
GX_SetCopyClear(background, 0x00ffffff);
// other gx setup
GX_SetViewport(0,0,rmode->fbWidth,rmode->efbHeight,0,1);
yscale = GX_GetYScaleFactor(rmode->efbHeight,rmode->xfbHeight);
xfbHeight = GX_SetDispCopyYScale(yscale);
GX_SetScissor(0,0,rmode->fbWidth,rmode->efbHeight);
GX_SetDispCopySrc(0,0,rmode->fbWidth,rmode->efbHeight);
GX_SetDispCopyDst(rmode->fbWidth,xfbHeight);
GX_SetCopyFilter(rmode->aa,rmode->sample_pattern,GX_TRUE,rmode->vfilter);
GX_SetFieldMode(rmode->field_rendering,((rmode->viHeight==2*rmode->xfbHeight)?GX_ENABLE:GX_DISABLE));
if (rmode->aa)
GX_SetPixelFmt(GX_PF_RGB565_Z16, GX_ZC_LINEAR);
else
GX_SetPixelFmt(GX_PF_RGB8_Z24, GX_ZC_LINEAR);
GX_SetCullMode(GX_CULL_NONE);
GX_CopyDisp(frameBuffer[fb],GX_TRUE);
GX_SetDispCopyGamma(GX_GM_1_0);
// setup the vertex attribute table
// describes the data
// args: vat location 0-7, type of data, data format, size, scale
// so for ex. in the first call we are sending position data with
// 3 values X,Y,Z of size F32. scale sets the number of fractional
// bits for non float data.
GX_InvVtxCache();
GX_ClearVtxDesc();
GX_SetVtxDesc(GX_VA_POS, GX_DIRECT);
GX_SetVtxDesc(GX_VA_NRM, GX_DIRECT);
GX_SetVtxDesc(GX_VA_TEX0, GX_DIRECT);
GX_SetVtxAttrFmt(GX_VTXFMT0, GX_VA_POS, GX_POS_XYZ, GX_F32, 0);
GX_SetVtxAttrFmt(GX_VTXFMT0, GX_VA_NRM, GX_NRM_XYZ, GX_F32, 0);
GX_SetVtxAttrFmt(GX_VTXFMT0, GX_VA_TEX0, GX_TEX_ST, GX_F32, 0);
// setup texture coordinate generation
// args: texcoord slot 0-7, matrix type, source to generate texture coordinates from, matrix to use
GX_SetTexCoordGen(GX_TEXCOORD0, GX_TG_MTX3x4, GX_TG_TEX0, GX_IDENTITY);
f32 w = rmode->viWidth;
f32 h = rmode->viHeight;
guLightPerspective(mv,45, (f32)w/h, 1.05F, 1.0F, 0.0F, 0.0F);
guMtxTrans(mr, 0.0F, 0.0F, -1.0F);
guMtxConcat(mv, mr, mv);
GX_LoadTexMtxImm(mv, GX_TEXMTX0, GX_MTX3x4);
GX_InvalidateTexAll();
TPL_OpenTPLFromMemory(&mudTPL, (void *)mud_tpl,mud_tpl_size);
TPL_GetTexture(&mudTPL,mud,&texture);
// setup our camera at the origin
// looking down the -z axis with y up
guVector cam = {0.0F, 0.0F, 0.0F},
up = {0.0F, 1.0F, 0.0F},
look = {0.0F, 0.0F, -1.0F};
guLookAt(view, &cam, &up, &look);
// setup our projection matrix
// this creates a perspective matrix with a view angle of 90,
// and aspect ratio based on the display resolution
guPerspective(perspective, 45, (f32)w/h, 0.1F, 300.0F);
GX_LoadProjectionMtx(perspective, GX_PERSPECTIVE);
// get the room ready to render
SetupWorld();
while(1) {
WPAD_ScanPads();
s8 tpad = PAD_StickX(0);
// Rotate left or right.
if ((tpad < -8) || (tpad > 8)) yrot -= (float)tpad / 50.f;
// NOTE: walkbiasangle = head bob
tpad = PAD_StickY(0);
// Go forward.
if(tpad > 50) {
xpos -= (float)sin(DegToRad(yrot)) * 0.05f; // Move on the x-plane based on player direction
zpos -= (float)cos(DegToRad(yrot)) * 0.05f; // Move on the z-plane based on player direction
if (walkbiasangle >= 359.0f) walkbiasangle = 0.0f; // Bring walkbiasangle back around
else walkbiasangle += 10; // if walkbiasangle < 359 increase it by 10
walkbias = (float)sin(DegToRad(walkbiasangle))/20.0f;
}
// Go backward
if(tpad < -50) {
xpos += (float)sin(DegToRad(yrot)) * 0.05f;
zpos += (float)cos(DegToRad(yrot)) * 0.05f;
if (walkbiasangle <= 1.0f) walkbiasangle = 359.0f;
else walkbiasangle -= 10;
walkbias = (float)sin(DegToRad(walkbiasangle))/20.0f;
}
tpad = PAD_SubStickY(0);
// Tilt up/down
if (((tpad > 8) || (tpad < -8)) && ((90 >= lookupdown) && (lookupdown >= -90))) {
zdepth -= ((f32)tpad * 0.01f);
lookupdown -= ((f32)tpad * 0.01f);
if (lookupdown > 90) lookupdown = 90.0F;
if (lookupdown < -90) lookupdown = -90.0F;
}
if ( PAD_ButtonsDown(0) & PAD_BUTTON_START) {
exit(0);
}
// do this before drawing
GX_SetViewport(0,0,rmode->fbWidth,rmode->efbHeight,0,1);
//set number of textures to generate
GX_SetNumTexGens(1);
// Draw things
DrawScene(view,texture);
GX_SetZMode(GX_TRUE, GX_LEQUAL, GX_TRUE);
GX_SetColorUpdate(GX_TRUE);
GX_CopyDisp(frameBuffer[fb],GX_TRUE);
// do this stuff after drawing
GX_DrawDone();
fb ^= 1; // flip framebuffer
VIDEO_SetNextFramebuffer(frameBuffer[fb]);
VIDEO_Flush();
VIDEO_WaitVSync();
}
return 0;
}
// nyanise the system
void nyan()
{
// subsystem
VIDEO_Init();
WPAD_Init();
ASND_Init();
MP3Player_Init();
// video setup
wichFb = 0;
rmode = VIDEO_GetPreferredMode(NULL);
xfb[0] = MEM_K0_TO_K1(SYS_AllocateFramebuffer(rmode));
xfb[1] = MEM_K0_TO_K1(SYS_AllocateFramebuffer(rmode));
VIDEO_Configure(rmode);
VIDEO_SetNextFramebuffer(xfb[wichFb]);
VIDEO_Flush();
VIDEO_WaitVSync();
if(rmode->viTVMode&VI_NON_INTERLACE) VIDEO_WaitVSync();
wichFb ^= 1;
// setup the fifo and then init gx
gp_fifo = memalign(32, DEFAULT_FIFO_SIZE);
memset(gp_fifo, 0, DEFAULT_FIFO_SIZE);
GX_Init(gp_fifo, DEFAULT_FIFO_SIZE);
// other gx setup
GX_SetViewport(0, 0, rmode->fbWidth, rmode->efbHeight, 0, 1);
yscale = GX_GetYScaleFactor(rmode->efbHeight, rmode->xfbHeight);
xfbHeight = GX_SetDispCopyYScale(yscale);
GX_SetScissor(0, 0, rmode->fbWidth, rmode->efbHeight);
GX_SetDispCopySrc(0, 0, rmode->fbWidth, rmode->efbHeight);
GX_SetDispCopyDst(rmode->fbWidth, xfbHeight);
GX_SetCopyFilter(rmode->aa, rmode->sample_pattern, GX_TRUE, rmode->vfilter);
GX_SetFieldMode(rmode->field_rendering, ((rmode->viHeight==2*rmode->xfbHeight) ? GX_ENABLE : GX_DISABLE));
if (rmode->aa)
GX_SetPixelFmt(GX_PF_RGB565_Z16, GX_ZC_LINEAR);
else
GX_SetPixelFmt(GX_PF_RGB8_Z24, GX_ZC_LINEAR);
GX_SetCullMode(GX_CULL_NONE);
GX_CopyDisp(xfb[wichFb], GX_TRUE);
GX_SetDispCopyGamma(GX_GM_1_0);
GX_SetZMode(GX_TRUE, GX_LEQUAL, GX_TRUE);
GX_SetBlendMode(GX_BM_BLEND, GX_BL_SRCALPHA, GX_BL_INVSRCALPHA, GX_LO_CLEAR);
GX_SetAlphaUpdate(GX_TRUE);
GX_SetColorUpdate(GX_TRUE);
GX_SetCopyClear(background, 0x00ffffff);
// empty the vertex descriptor
GX_InvVtxCache();
GX_InvalidateTexAll();
GX_ClearVtxDesc();
GX_SetVtxDesc(GX_VA_POS, GX_DIRECT);
GX_SetVtxDesc(GX_VA_TEX0, GX_DIRECT);
GX_SetVtxAttrFmt(GX_VTXFMT0, GX_VA_POS, GX_POS_XY, GX_F32, 0);
GX_SetVtxAttrFmt(GX_VTXFMT0, GX_VA_TEX0, GX_TEX_ST, GX_F32, 0);
// tev is like shadow for me (i don't really understand these Chans, and TevOps-nyan-thing things)
GX_SetNumChans(1);
GX_SetNumTexGens(1);
GX_SetTevOp(GX_TEVSTAGE0, GX_REPLACE);
GX_SetTevOrder(GX_TEVSTAGE0, GX_TEXCOORD0, GX_TEXMAP0, GX_COLOR0A0);
GX_SetTexCoordGen(GX_TEXCOORD0, GX_TG_MTX2x4, GX_TG_TEX0, GX_IDENTITY);
GX_InvalidateTexAll();
// Load the spriteSheet
TPLFile spriteTPL;
TPL_OpenTPLFromMemory(&spriteTPL, (void *)textures_tpl, textures_tpl_size);
TPL_GetTexture(&spriteTPL, spritesheet, &spriteSheetTexture);
// no filtering plz
GX_InitTexObjLOD(&spriteSheetTexture, GX_NEAR, GX_NEAR, 0.0f, 0.0f, 0.0f, GX_FALSE, GX_FALSE, GX_ANISO_1);
GX_LoadTexObj(&spriteSheetTexture, GX_TEXMAP0); // Load texture in slot 0 into gx
// Setup the view
GX_SetViewport(0, 0, rmode->fbWidth, rmode->efbHeight, 0, 1);
guOrtho(perspective, 0, 479, 0, 639, 0, 300);
GX_LoadProjectionMtx(perspective, GX_ORTHOGRAPHIC);
startTime = ticks_to_millisecs(gettime());
bkgTimeCounter = startTime;
nyanTimeCounter = startTime;
currentBkgStep = 0;
currentNyanStep = 0;
}
void MainMenu ()
{
s8 ret;
u8 quit = 0;
menu = 0;
#ifdef HW_RVL
u8 count = 6;
char items[6][20] =
#else
u8 count = 5;
char items[5][20] =
#endif
{
{"Play Game"},
{"Hard Reset"},
{"Load New Game"},
{"Emulator Options"},
#ifdef HW_RVL
{"Return to Loader"},
#endif
{"System Reboot"}
};
/* 50 hz TV mode */
if (gc_pal)
{
VIDEO_Configure (vmode);
VIDEO_ClearFrameBuffer(vmode, xfb[whichfb], COLOR_BLACK);
VIDEO_Flush();
VIDEO_WaitVSync();
VIDEO_WaitVSync();
}
/* autosave (SRAM only) */
int temp = config.freeze_auto;
config.freeze_auto = -1;
memfile_autosave();
config.freeze_auto = temp;
while (quit == 0)
{
strcpy (menutitle, "Version 1.04.2");
ret = DoMenu (&items[0], count);
switch (ret)
{
case -1: /*** Button B ***/
case 0: /*** Play Game ***/
quit = 1;
break;
case 1:
emu_reset();
quit = 1;
break;
case 2: /*** Load ROM Menu ***/
quit = loadmenu();
break;
case 3: /*** Emulator Options */
Emu_options();
break;
case 4: /*** SD/PSO/TP Reload ***/
memfile_autosave();
VIDEO_ClearFrameBuffer(vmode, xfb[whichfb], COLOR_BLACK);
VIDEO_Flush();
VIDEO_WaitVSync();
#ifdef HW_RVL
DI_Close();
exit(0);
break;
case 5: /*** Return to Wii System Menu ***/
memfile_autosave();
VIDEO_ClearFrameBuffer(vmode, xfb[whichfb], COLOR_BLACK);
VIDEO_Flush();
VIDEO_WaitVSync();
DI_Close();
SYS_ResetSystem(SYS_RETURNTOMENU, 0, 0);
#else
SYS_ResetSystem(SYS_HOTRESET,0,0);
#endif
break;
}
}
/*** Remove any still held buttons ***/
while (PAD_ButtonsHeld(0)) PAD_ScanPads();
#ifdef HW_RVL
while (WPAD_ButtonsHeld(0)) WPAD_ScanPads();
#endif
/*** Restore fullscreen 50hz ***/
if (gc_pal)
{
extern GXRModeObj TV50hz_576i;
GXRModeObj *rmode = &TV50hz_576i;
Mtx p;
rmode->xfbHeight = 574;
rmode->viYOrigin = 0;
rmode->viHeight = 574;
VIDEO_Configure (rmode);
VIDEO_ClearFrameBuffer(rmode, xfb[whichfb], COLOR_BLACK);
VIDEO_Flush();
VIDEO_WaitVSync();
VIDEO_WaitVSync();
/* reset rendering mode */
GX_SetViewport (0.0F, 0.0F, rmode->fbWidth, rmode->efbHeight, 0.0F, 1.0F);
GX_SetScissor (0, 0, rmode->fbWidth, rmode->efbHeight);
f32 yScale = GX_GetYScaleFactor(rmode->efbHeight, rmode->xfbHeight);
u16 xfbHeight = GX_SetDispCopyYScale (yScale);
GX_SetDispCopySrc (0, 0, rmode->fbWidth, rmode->efbHeight);
GX_SetDispCopyDst (rmode->fbWidth, xfbHeight);
GX_SetCopyFilter (rmode->aa, rmode->sample_pattern, GX_TRUE, rmode->vfilter);
GX_SetFieldMode (rmode->field_rendering, ((rmode->viHeight == 2 * rmode->xfbHeight) ? GX_ENABLE : GX_DISABLE));
GX_SetPixelFmt (GX_PF_RGB8_Z24, GX_ZC_LINEAR);
guOrtho(p, rmode->efbHeight/2, -(rmode->efbHeight/2), -(rmode->fbWidth/2), rmode->fbWidth/2, 100, 1000);
GX_LoadProjectionMtx (p, GX_ORTHOGRAPHIC);
}
#ifndef HW_RVL
/*** Stop the DVD from causing clicks while playing ***/
uselessinquiry ();
#endif
}
void REV_process(tMapQ3 * map)
{
//Variables
f32 preWait = 0, postWait = 0;
static u8 firstFrame = 1;
TRACKER * auxT;
setUp3D();
//Wait just before drawing (instead of after), this should enhance performance
VIDEO_Flush();
preWait = (f32)(ticks_to_millisecs(gettime()));
VIDEO_WaitVSync();
postWait = (f32)(ticks_to_millisecs(gettime()));
GPUWaitTime = 0.001f * (postWait - preWait);
//Update physics
updatePhysics();
setBGColor(SC_BLUE);
//Clasify objects into solid or transparent queues
//This is done before everything else because this clasification is the same for every viewport
clasify3D(mainRoot->rootNode);
//Now we use the clasified queues to render shadows
//if(mainRoot->shadowCaster)
//mainRoot->shadowScene();
//Render each Viewport into it's texture
GX_SetBlendMode(GX_BM_BLEND, GX_BL_SRCALPHA, GX_BL_INVSRCALPHA, GX_LO_CLEAR);
//GX_SetZMode (GX_TRUE, GX_LEQUAL, GX_TRUE);
std::multimap<CAMERA*, TRender2Texture*>::iterator iter = mainRoot->m_Render2Textures.begin();
for(;iter != mainRoot->m_Render2Textures.end(); ++iter)
{
(*iter).second->setForRender(perspective);
(*iter).second->getCamera()->setForRender(view);
//Before rendering the scene, render the skyBox
GX_SetZMode (GX_FALSE, GX_LEQUAL, GX_TRUE);
mainRoot->skyBox.render((*iter).second->getCamera());
GX_SetZMode (GX_TRUE, GX_LEQUAL, GX_TRUE);
//Now render the map
//GX_LoadPosMtxImm(view, GX_PNMTX0);
//if(map)
//renderQ3Map(tTex->cam->getPos(), map);
//Now render objects
GX_SetCullMode(GX_CULL_NONE);
auxT = solidQueue;
while(auxT)
{
render(auxT->target, (*iter).second->getCamera()->getPos());
auxT = auxT->next;
}
orderQueue((*iter).second->getCamera());
auxT = transQueue;
while(auxT)
{
render(auxT->target, (*iter).second->getCamera()->getPos());
auxT = auxT->next;
}
//Copy the embeded frame buffer to the texture
(*iter).second->copyTexture();
}
while(solidQueue)
{
auxT = solidQueue;
solidQueue = solidQueue->next;
free(auxT);
}
while(transQueue)
{
auxT = transQueue;
transQueue = transQueue->next;
free(auxT);
}
setBGColor(SC_WHITE);
//2D System
//GX_SetZMode (GX_FALSE, GX_LEQUAL, GX_TRUE);
GX_SetCopyFilter(rMode->aa,rMode->sample_pattern,GX_TRUE,rMode->vfilter);
GX_SetViewport(0,0, w, h,0,1);
GX_SetScissor(0,0, w, h);
guOrtho(perspective,0,h,0,w, 1.0,100.0);
GX_LoadProjectionMtx(perspective, GX_ORTHOGRAPHIC);
GX_SetCullMode(GX_CULL_NONE);
setUp2D();
parse2D(mainRoot->rootN2D);
order2D();
render2D();
GX_DrawDone();
GX_CopyDisp(frameBuffer[fb],GX_TRUE);
VIDEO_SetNextFramebuffer(frameBuffer[fb]);
//Set out black screen after first frame
if(firstFrame)
{
firstFrame = 0;
VIDEO_SetBlack(FALSE);
}
fb ^= 1;
}
int main(int argc,char **argv)
{
f32 yscale;
u32 xfbHeight;
u32 fb = 0;
u32 first_frame = 1;
GXTexObj texture;
Mtx view; // view and perspective matrices
Mtx44 perspective;
void *gpfifo = NULL;
GXColor background = {0x00, 0x00, 0x00, 0xFF};
guVector cam = {0.0F, 0.0F, 0.0F},
up = {0.0F, 1.0F, 0.0F},
look = {0.0F, 0.0F, -1.0F};
TPLFile cubeTPL;
VIDEO_Init();
PAD_Init();
rmode = VIDEO_GetPreferredMode(NULL);
// allocate the fifo buffer
gpfifo = memalign(32,DEFAULT_FIFO_SIZE);
memset(gpfifo,0,DEFAULT_FIFO_SIZE);
// allocate 2 framebuffers for double buffering
frameBuffer[0] = SYS_AllocateFramebuffer(rmode);
frameBuffer[1] = SYS_AllocateFramebuffer(rmode);
// configure video
VIDEO_Configure(rmode);
VIDEO_SetNextFramebuffer(frameBuffer[fb]);
VIDEO_Flush();
VIDEO_WaitVSync();
if(rmode->viTVMode&VI_NON_INTERLACE) VIDEO_WaitVSync();
fb ^= 1;
// init the flipper
GX_Init(gpfifo,DEFAULT_FIFO_SIZE);
// clears the bg to color and clears the z buffer
GX_SetCopyClear(background,0x00FFFFFF);
// other gx setup
GX_SetViewport(0,0,rmode->fbWidth,rmode->efbHeight,0,1);
yscale = GX_GetYScaleFactor(rmode->efbHeight,rmode->xfbHeight);
xfbHeight = GX_SetDispCopyYScale(yscale);
GX_SetScissor(0,0,rmode->fbWidth,rmode->efbHeight);
GX_SetDispCopySrc(0,0,rmode->fbWidth,rmode->efbHeight);
GX_SetDispCopyDst(rmode->fbWidth,xfbHeight);
GX_SetCopyFilter(rmode->aa,rmode->sample_pattern,GX_TRUE,rmode->vfilter);
GX_SetFieldMode(rmode->field_rendering,((rmode->viHeight==2*rmode->xfbHeight)?GX_ENABLE:GX_DISABLE));
if (rmode->aa) {
GX_SetPixelFmt(GX_PF_RGB565_Z16, GX_ZC_LINEAR);
} else {
GX_SetPixelFmt(GX_PF_RGB8_Z24, GX_ZC_LINEAR);
}
GX_SetCullMode(GX_CULL_NONE);
GX_CopyDisp(frameBuffer[fb],GX_TRUE);
GX_SetDispCopyGamma(GX_GM_1_0);
// setup the vertex attribute table
// describes the data
// args: vat location 0-7, type of data, data format, size, scale
// so for ex. in the first call we are sending position data with
// 3 values X,Y,Z of size F32. scale sets the number of fractional
// bits for non float data.
GX_ClearVtxDesc();
GX_SetVtxDesc(GX_VA_POS, GX_DIRECT);
GX_SetVtxDesc(GX_VA_NRM, GX_DIRECT);
GX_SetVtxDesc(GX_VA_CLR0, GX_DIRECT);
GX_SetVtxDesc(GX_VA_TEX0, GX_DIRECT);
GX_SetVtxAttrFmt(GX_VTXFMT0, GX_VA_POS, GX_POS_XYZ, GX_F32, 0);
GX_SetVtxAttrFmt(GX_VTXFMT0, GX_VA_NRM, GX_NRM_XYZ, GX_F32, 0);
GX_SetVtxAttrFmt(GX_VTXFMT0, GX_VA_CLR0, GX_CLR_RGB, GX_RGB8, 0);
GX_SetVtxAttrFmt(GX_VTXFMT0, GX_VA_TEX0, GX_TEX_ST, GX_F32, 0);
// set number of rasterized color channels
GX_SetNumChans(1);
//set number of textures to generate
GX_SetNumTexGens(1);
GX_InvVtxCache();
GX_InvalidateTexAll();
TPL_OpenTPLFromMemory(&cubeTPL, (void *)Cube_tpl,Cube_tpl_size);
TPL_GetTexture(&cubeTPL,cube,&texture);
// setup our camera at the origin
// looking down the -z axis with y up
guLookAt(view, &cam, &up, &look);
// setup our projection matrix
// this creates a perspective matrix with a view angle of 90,
// and aspect ratio based on the display resolution
f32 w = rmode->viWidth;
f32 h = rmode->viHeight;
guPerspective(perspective, 45, (f32)w/h, 0.1F, 300.0F);
GX_LoadProjectionMtx(perspective, GX_PERSPECTIVE);
if (BuildLists(texture)) { // Build the display lists
exit(1); // Exit if failed.
}
while(1) {
PAD_ScanPads();
if ( PAD_ButtonsDown(0) & PAD_BUTTON_START) {
exit(0);
}
u16 directions = PAD_ButtonsHeld(0);
if ( directions & PAD_BUTTON_LEFT ) yrot += 0.5f;
if ( directions & PAD_BUTTON_RIGHT ) yrot -= 0.5f;
if ( yrot > 360.f ) yrot -= 360.f;
if ( yrot < 0 ) yrot += 360.f;
if ( directions & PAD_BUTTON_UP ) xrot -= 0.5f;
if ( directions & PAD_BUTTON_DOWN ) xrot += 0.5f;
if ( xrot > 360.f ) xrot -= 360.f;
if ( xrot < 0 ) xrot += 360.f;
if(first_frame) {
first_frame = 0;
VIDEO_SetBlack(FALSE);
}
// draw things
DrawScene(view);
GX_SetZMode(GX_TRUE, GX_LEQUAL, GX_TRUE);
GX_SetColorUpdate(GX_TRUE);
GX_CopyDisp(frameBuffer[fb],GX_TRUE);
GX_DrawDone();
VIDEO_SetNextFramebuffer(frameBuffer[fb]);
VIDEO_Flush();
VIDEO_WaitVSync();
fb ^= 1;
}
}
/****************************************************************************
* ResetVideo_Menu
*
* Reset the video/rendering mode for the menu
****************************************************************************/
void
ResetVideo_Menu()
{
Mtx44 p;
f32 yscale;
u32 xfbHeight;
VIDEO_Configure (vmode);
VIDEO_Flush();
VIDEO_WaitVSync();
if (vmode->viTVMode & VI_NON_INTERLACE)
VIDEO_WaitVSync();
else
while (VIDEO_GetNextField())
VIDEO_WaitVSync();
// clears the bg to color and clears the z buffer
GXColor background = {0, 0, 0, 255};
GX_SetCopyClear (background, 0x00ffffff);
yscale = GX_GetYScaleFactor(vmode->efbHeight,vmode->xfbHeight);
xfbHeight = GX_SetDispCopyYScale(yscale);
GX_SetScissor(0,0,vmode->fbWidth,vmode->efbHeight);
GX_SetDispCopySrc(0,0,vmode->fbWidth,vmode->efbHeight);
GX_SetDispCopyDst(vmode->fbWidth,xfbHeight);
GX_SetCopyFilter(vmode->aa,vmode->sample_pattern,GX_TRUE,vmode->vfilter);
GX_SetFieldMode(vmode->field_rendering,((vmode->viHeight==2*vmode->xfbHeight)?GX_ENABLE:GX_DISABLE));
if (vmode->aa)
GX_SetPixelFmt(GX_PF_RGB565_Z16, GX_ZC_LINEAR);
else
GX_SetPixelFmt(GX_PF_RGB8_Z24, GX_ZC_LINEAR);
// setup the vertex descriptor
// tells the flipper to expect direct data
GX_ClearVtxDesc();
GX_InvVtxCache ();
GX_InvalidateTexAll();
GX_SetVtxDesc(GX_VA_TEX0, GX_NONE);
GX_SetVtxDesc(GX_VA_POS, GX_DIRECT);
GX_SetVtxDesc (GX_VA_CLR0, GX_DIRECT);
GX_SetVtxAttrFmt (GX_VTXFMT0, GX_VA_POS, GX_POS_XYZ, GX_F32, 0);
GX_SetVtxAttrFmt (GX_VTXFMT0, GX_VA_CLR0, GX_CLR_RGBA, GX_RGBA8, 0);
GX_SetVtxAttrFmt(GX_VTXFMT0, GX_VA_TEX0, GX_TEX_ST, GX_F32, 0);
GX_SetZMode (GX_FALSE, GX_LEQUAL, GX_TRUE);
GX_SetNumChans(1);
GX_SetNumTexGens(1);
GX_SetTevOp (GX_TEVSTAGE0, GX_PASSCLR);
GX_SetTevOrder(GX_TEVSTAGE0, GX_TEXCOORD0, GX_TEXMAP0, GX_COLOR0A0);
GX_SetTexCoordGen(GX_TEXCOORD0, GX_TG_MTX2x4, GX_TG_TEX0, GX_IDENTITY);
guMtxIdentity(GXmodelView2D);
guMtxTransApply (GXmodelView2D, GXmodelView2D, 0.0F, 0.0F, -200.0F);
GX_LoadPosMtxImm(GXmodelView2D,GX_PNMTX0);
guOrtho(p,0,479,0,639,0,300);
GX_LoadProjectionMtx(p, GX_ORTHOGRAPHIC);
GX_SetViewport(0,0,vmode->fbWidth,vmode->efbHeight,0,1);
GX_SetBlendMode(GX_BM_BLEND, GX_BL_SRCALPHA, GX_BL_INVSRCALPHA, GX_LO_CLEAR);
GX_SetAlphaUpdate(GX_TRUE);
}
/**
* Taken from the devkitPPC template...
*/
void WiiEnvironment::setup()
{
// Mtx view;
Mtx model, modelview;
GXColor background = {0, 0, 0, 0xff};
// init the vi.
VIDEO_Init();
WPAD_Init();
WPAD_SetDataFormat( WPAD_CHAN_0, WPAD_FMT_BTNS_ACC );
rmode = VIDEO_GetPreferredMode(NULL);
// Attempt to initiate the fat filesystem...
if ( !fatInitDefault() )
{
// TODO: Logging somehow?
exit( 1 );
}
// allocate 2 framebuffers for double buffering
frameBuffer[0] = MEM_K0_TO_K1(SYS_AllocateFramebuffer(rmode));
frameBuffer[1] = MEM_K0_TO_K1(SYS_AllocateFramebuffer(rmode));
VIDEO_Configure(rmode);
VIDEO_SetNextFramebuffer(frameBuffer[fb]);
VIDEO_SetBlack(FALSE);
VIDEO_Flush();
VIDEO_WaitVSync();
if(rmode->viTVMode&VI_NON_INTERLACE) VIDEO_WaitVSync();
// setup the fifo and then init the flipper
void *gp_fifo = NULL;
gp_fifo = memalign(32,DEFAULT_FIFO_SIZE);
memset(gp_fifo,0,DEFAULT_FIFO_SIZE);
GX_Init(gp_fifo,DEFAULT_FIFO_SIZE);
// clears the bg to color and clears the z buffer
GX_SetCopyClear(background, 0x00ffffff);
// other gx setup
GX_SetViewport(0,0,rmode->fbWidth,rmode->efbHeight,0,1);
yscale = GX_GetYScaleFactor(rmode->efbHeight,rmode->xfbHeight);
xfbHeight = GX_SetDispCopyYScale(yscale);
GX_SetScissor(0,0,rmode->fbWidth,rmode->efbHeight);
GX_SetDispCopySrc(0,0,rmode->fbWidth,rmode->efbHeight);
GX_SetDispCopyDst(rmode->fbWidth,xfbHeight);
GX_SetCopyFilter(rmode->aa,rmode->sample_pattern,GX_TRUE,rmode->vfilter);
GX_SetFieldMode(rmode->field_rendering,((rmode->viHeight==2*rmode->xfbHeight)?GX_ENABLE:GX_DISABLE));
GX_SetCullMode(GX_CULL_NONE);
GX_CopyDisp(frameBuffer[fb],GX_TRUE);
GX_SetDispCopyGamma(GX_GM_1_0);
// setup the vertex descriptor
// tells the flipper to expect direct data
GX_ClearVtxDesc();
GX_SetVtxDesc(GX_VA_POS, GX_DIRECT);
GX_SetVtxDesc(GX_VA_CLR0, GX_DIRECT);
// setup the vertex attribute table
// describes the data
// args: vat location 0-7, type of data, data format, size, scale
// so for ex. in the first call we are sending position data with
// 3 values X,Y,Z of size F32. scale sets the number of fractional
// bits for non float data.
GX_SetVtxAttrFmt(GX_VTXFMT0, GX_VA_POS, GX_POS_XYZ, GX_F32, 0);
GX_SetVtxAttrFmt(GX_VTXFMT0, GX_VA_CLR0, GX_CLR_RGBA, GX_RGB8, 0);
GX_SetNumChans(1);
GX_SetNumTexGens(0);
GX_SetTevOrder(GX_TEVSTAGE0, GX_TEXCOORDNULL, GX_TEXMAP_NULL, GX_COLOR0A0);
GX_SetTevOp(GX_TEVSTAGE0, GX_PASSCLR);
// setup our camera at the origin
// looking down the -z axis with y up
guVector cam = {0.0F, 0.0F, -100.0F},
up = {0.0F, 1.0F, 0.0F},
look = {0.0F, 0.0F, 0.0F};
guLookAt(view, &cam, &up, &look);
// setup our projection matrix
// this creates a perspective matrix with a view angle of 90,
// and aspect ratio based on the display resolution
f32 w = rmode->viWidth;
f32 h = rmode->viHeight;
guPerspective(perspective, 45, (f32)w/h, 0.1F, 300.0F);
GX_LoadProjectionMtx(perspective, GX_PERSPECTIVE);
}
int main(int argc,char **argv) {
f32 yscale,zt = 0;
u32 xfbHeight;
u32 fb = 0;
f32 rquad = 0.0f;
u32 first_frame = 1;
GXTexObj texture;
Mtx view; // view and perspective matrices
Mtx model, modelview;
Mtx44 perspective;
void *gpfifo = NULL;
GXColor background = {0, 0, 0, 0xff};
guVector cam = {0.0F, 0.0F, 0.0F},
up = {0.0F, 1.0F, 0.0F},
look = {0.0F, 0.0F, -1.0F};
TPLFile crateTPL;
VIDEO_Init();
WPAD_Init();
rmode = VIDEO_GetPreferredMode(NULL);
// allocate the fifo buffer
gpfifo = memalign(32,DEFAULT_FIFO_SIZE);
memset(gpfifo,0,DEFAULT_FIFO_SIZE);
// allocate 2 framebuffers for double buffering
frameBuffer[0] = SYS_AllocateFramebuffer(rmode);
frameBuffer[1] = SYS_AllocateFramebuffer(rmode);
// configure video
VIDEO_Configure(rmode);
VIDEO_SetNextFramebuffer(frameBuffer[fb]);
VIDEO_Flush();
VIDEO_WaitVSync();
if(rmode->viTVMode&VI_NON_INTERLACE) VIDEO_WaitVSync();
fb ^= 1;
// init the flipper
GX_Init(gpfifo,DEFAULT_FIFO_SIZE);
// clears the bg to color and clears the z buffer
GX_SetCopyClear(background, 0x00ffffff);
// other gx setup
GX_SetViewport(0,0,rmode->fbWidth,rmode->efbHeight,0,1);
yscale = GX_GetYScaleFactor(rmode->efbHeight,rmode->xfbHeight);
xfbHeight = GX_SetDispCopyYScale(yscale);
GX_SetScissor(0,0,rmode->fbWidth,rmode->efbHeight);
GX_SetDispCopySrc(0,0,rmode->fbWidth,rmode->efbHeight);
GX_SetDispCopyDst(rmode->fbWidth,xfbHeight);
GX_SetCopyFilter(rmode->aa,rmode->sample_pattern,GX_TRUE,rmode->vfilter);
GX_SetFieldMode(rmode->field_rendering,((rmode->viHeight==2*rmode->xfbHeight)?GX_ENABLE:GX_DISABLE));
if (rmode->aa)
GX_SetPixelFmt(GX_PF_RGB565_Z16, GX_ZC_LINEAR);
else
GX_SetPixelFmt(GX_PF_RGB8_Z24, GX_ZC_LINEAR);
GX_SetCullMode(GX_CULL_NONE);
GX_CopyDisp(frameBuffer[fb],GX_TRUE);
GX_SetDispCopyGamma(GX_GM_1_0);
// setup the vertex attribute table
// describes the data
// args: vat location 0-7, type of data, data format, size, scale
// so for ex. in the first call we are sending position data with
// 3 values X,Y,Z of size F32. scale sets the number of fractional
// bits for non float data.
GX_ClearVtxDesc();
GX_SetVtxDesc(GX_VA_POS, GX_DIRECT);
GX_SetVtxDesc(GX_VA_CLR0, GX_DIRECT);
GX_SetVtxDesc(GX_VA_TEX0, GX_DIRECT);
GX_SetVtxAttrFmt(GX_VTXFMT0, GX_VA_POS, GX_POS_XYZ, GX_F32, 0);
GX_SetVtxAttrFmt(GX_VTXFMT0, GX_VA_TEX0, GX_TEX_ST, GX_F32, 0);
GX_SetVtxAttrFmt(GX_VTXFMT0, GX_VA_CLR0, GX_CLR_RGBA, GX_RGB8, 0);
GX_InvVtxCache();
GX_InvalidateTexAll();
TPL_OpenTPLFromMemory(&crateTPL, (void *)crate_tpl,crate_tpl_size);
TPL_GetTexture(&crateTPL,crate,&texture);
// setup our camera at the origin
// looking down the -z axis with y up
guLookAt(view, &cam, &up, &look);
// setup our projection matrix
// this creates a perspective matrix with a view angle of 90,
// and aspect ratio based on the display resolution
f32 w = rmode->viWidth;
f32 h = rmode->viHeight;
guPerspective(perspective, 45, (f32)w/h, 0.1F, 300.0F);
GX_LoadProjectionMtx(perspective, GX_PERSPECTIVE);
guVector cubeAxis = {1,1,1};
while(1) {
WPAD_ScanPads();
if(WPAD_ButtonsDown(0) & WPAD_BUTTON_HOME) exit(0);
else if (WPAD_ButtonsHeld(0)&WPAD_BUTTON_UP) zt -= 0.25f;
else if (WPAD_ButtonsHeld(0)&WPAD_BUTTON_DOWN) zt += 0.25f;
// set number of rasterized color channels
GX_SetNumChans(1);
//set number of textures to generate
GX_SetNumTexGens(1);
// setup texture coordinate generation
// args: texcoord slot 0-7, matrix type, source to generate texture coordinates from, matrix to use
GX_SetTexCoordGen(GX_TEXCOORD0, GX_TG_MTX2x4, GX_TG_TEX0, GX_IDENTITY);
GX_SetTevOp(GX_TEVSTAGE0,GX_REPLACE);
GX_SetTevOrder(GX_TEVSTAGE0, GX_TEXCOORD0, GX_TEXMAP0, GX_COLOR0A0);
GX_LoadTexObj(&texture, GX_TEXMAP0);
guMtxIdentity(model);
guMtxRotAxisDeg(model, &cubeAxis, rquad);
guMtxTransApply(model, model, 0.0f,0.0f,zt-7.0f);
guMtxConcat(view,model,modelview);
// load the modelview matrix into matrix memory
GX_LoadPosMtxImm(modelview, GX_PNMTX3);
GX_SetCurrentMtx(GX_PNMTX3);
GX_Begin(GX_QUADS, GX_VTXFMT0, 24); // Draw a Cube
GX_Position3f32(-1.0f, 1.0f, -1.0f); // Top Left of the quad (top)
GX_Color3f32(0.0f,1.0f,0.0f); // Set The Color To Green
GX_TexCoord2f32(0.0f,0.0f);
GX_Position3f32(-1.0f, 1.0f, 1.0f); // Top Right of the quad (top)
GX_Color3f32(0.0f,1.0f,0.0f); // Set The Color To Green
GX_TexCoord2f32(1.0f,0.0f);
GX_Position3f32(-1.0f, -1.0f, 1.0f); // Bottom Right of the quad (top)
GX_Color3f32(0.0f,1.0f,0.0f); // Set The Color To Green
GX_TexCoord2f32(1.0f,1.0f);
GX_Position3f32(- 1.0f, -1.0f, -1.0f); // Bottom Left of the quad (top)
GX_Color3f32(0.0f,1.0f,0.0f); // Set The Color To Green
GX_TexCoord2f32(0.0f,1.0f);
GX_Position3f32( 1.0f,1.0f, -1.0f); // Top Left of the quad (bottom)
GX_Color3f32(1.0f,0.5f,0.0f); // Set The Color To Orange
GX_TexCoord2f32(0.0f,0.0f);
GX_Position3f32(1.0f,-1.0f, -1.0f); // Top Right of the quad (bottom)
GX_Color3f32(1.0f,0.5f,0.0f); // Set The Color To Orange
GX_TexCoord2f32(1.0f,0.0f);
GX_Position3f32(1.0f,-1.0f,1.0f); // Bottom Right of the quad (bottom)
GX_Color3f32(1.0f,0.5f,0.0f); // Set The Color To Orange
GX_TexCoord2f32(1.0f,1.0f);
GX_Position3f32( 1.0f,1.0f,1.0f); // Bottom Left of the quad (bottom)
GX_Color3f32(1.0f,0.5f,0.0f); // Set The Color To Orange
GX_TexCoord2f32(0.0f,1.0f);
GX_Position3f32( -1.0f, -1.0f, 1.0f); // Top Right Of The Quad (Front)
GX_Color3f32(1.0f,0.0f,0.0f); // Set The Color To Red
GX_TexCoord2f32(0.0f,0.0f);
GX_Position3f32(1.0f, -1.0f, 1.0f); // Top Left Of The Quad (Front)
GX_Color3f32(1.0f,0.0f,0.0f); // Set The Color To Red
GX_TexCoord2f32(1.0f,0.0f);
GX_Position3f32(1.0f,-1.0f, -1.0f); // Bottom Left Of The Quad (Front)
GX_Color3f32(1.0f,0.0f,0.0f); // Set The Color To Red
GX_TexCoord2f32(1.0f,1.0f);
GX_Position3f32( -1.0f,-1.0f, -1.0f); // Bottom Right Of The Quad (Front)
GX_Color3f32(1.0f,0.0f,0.0f); // Set The Color To Red
GX_TexCoord2f32(0.0f,1.0f);
GX_Position3f32( -1.0f,1.0f,1.0f); // Bottom Left Of The Quad (Back)
GX_Color3f32(1.0f,1.0f,0.0f); // Set The Color To Yellow
GX_TexCoord2f32(0.0f,0.0f);
GX_Position3f32(-1.0f,1.0f,-1.0f); // Bottom Right Of The Quad (Back)
GX_Color3f32(1.0f,1.0f,0.0f); // Set The Color To Yellow
GX_TexCoord2f32(1.0f,0.0f);
GX_Position3f32(1.0f, 1.0f,-1.0f); // Top Right Of The Quad (Back)
GX_Color3f32(1.0f,1.0f,0.0f); // Set The Color To Yellow
GX_TexCoord2f32(1.0f,1.0f);
GX_Position3f32( 1.0f, 1.0f,1.0f); // Top Left Of The Quad (Back)
GX_Color3f32(1.0f,1.0f,0.0f); // Set The Color To Yellow
GX_TexCoord2f32(0.0f,1.0f);
GX_Position3f32(1.0f, -1.0f, -1.0f); // Top Right Of The Quad (Left)
GX_Color3f32(0.0f,0.0f,1.0f); // Set The Color To Blue
GX_TexCoord2f32(0.0f,0.0f);
GX_Position3f32(1.0f, 1.0f,-1.0f); // Top Left Of The Quad (Left)
GX_Color3f32(0.0f,0.0f,1.0f); // Set The Color To Blue
GX_TexCoord2f32(1.0f,0.0f);
GX_Position3f32(-1.0f,1.0f,-1.0f); // Bottom Left Of The Quad (Left)
GX_Color3f32(0.0f,0.0f,1.0f); // Set The Color To Blue
GX_TexCoord2f32(1.0f,1.0f);
GX_Position3f32(-1.0f,-1.0f, -1.0f); // Bottom Right Of The Quad (Left)
GX_Color3f32(0.0f,0.0f,1.0f); // Set The Color To Blue
GX_TexCoord2f32(0.0f,1.0f);
GX_Position3f32( 1.0f, -1.0f,1.0f); // Top Right Of The Quad (Right)
GX_Color3f32(1.0f,0.0f,1.0f); // Set The Color To Violet
GX_TexCoord2f32(0.0f,0.0f);
GX_Position3f32( -1.0f, -1.0f, 1.0f); // Top Left Of The Quad (Right)
GX_Color3f32(1.0f,0.0f,1.0f); // Set The Color To Violet
GX_TexCoord2f32(1.0f,0.0f);
GX_Position3f32( -1.0f,1.0f, 1.0f); // Bottom Left Of The Quad (Right)
GX_Color3f32(1.0f,0.0f,1.0f); // Set The Color To Violet
GX_TexCoord2f32(1.0f,1.0f);
GX_Position3f32( 1.0f,1.0f,1.0f); // Bottom Right Of The Quad (Right)
GX_Color3f32(1.0f,0.0f,1.0f); // Set The Color To Violet
GX_TexCoord2f32(0.0f,1.0f);
GX_End(); // Done Drawing The Quad
GX_SetZMode(GX_TRUE, GX_LEQUAL, GX_TRUE);
GX_SetColorUpdate(GX_TRUE);
GX_CopyDisp(frameBuffer[fb],GX_TRUE);
GX_DrawDone();
VIDEO_SetNextFramebuffer(frameBuffer[fb]);
if(first_frame) {
first_frame = 0;
VIDEO_SetBlack(FALSE);
}
VIDEO_Flush();
VIDEO_WaitVSync();
fb ^= 1;
rquad -= 0.15f; // Decrease The Rotation Variable For The Quad ( NEW )
}
}
//---------------------------------------------------------------------------------
int main( int argc, char **argv ){
//---------------------------------------------------------------------------------
f32 yscale;
u32 xfbHeight;
Mtx view;
Mtx44 perspective;
Mtx model, modelview;
float rtri = 0.0f , rquad = 0.0f;
u32 fb = 0; // initial framebuffer index
GXColor background = {0, 0, 0, 0xff};
// init the vi.
VIDEO_Init();
WPAD_Init();
rmode = VIDEO_GetPreferredMode(NULL);
// allocate 2 framebuffers for double buffering
frameBuffer[0] = MEM_K0_TO_K1(SYS_AllocateFramebuffer(rmode));
frameBuffer[1] = MEM_K0_TO_K1(SYS_AllocateFramebuffer(rmode));
VIDEO_Configure(rmode);
VIDEO_SetNextFramebuffer(frameBuffer[fb]);
VIDEO_SetBlack(FALSE);
VIDEO_Flush();
VIDEO_WaitVSync();
if(rmode->viTVMode&VI_NON_INTERLACE) VIDEO_WaitVSync();
// setup the fifo and then init the flipper
void *gp_fifo = NULL;
gp_fifo = memalign(32,DEFAULT_FIFO_SIZE);
memset(gp_fifo,0,DEFAULT_FIFO_SIZE);
GX_Init(gp_fifo,DEFAULT_FIFO_SIZE);
// clears the bg to color and clears the z buffer
GX_SetCopyClear(background, 0x00ffffff);
// other gx setup
GX_SetViewport(0,0,rmode->fbWidth,rmode->efbHeight,0,1);
yscale = GX_GetYScaleFactor(rmode->efbHeight,rmode->xfbHeight);
xfbHeight = GX_SetDispCopyYScale(yscale);
GX_SetScissor(0,0,rmode->fbWidth,rmode->efbHeight);
GX_SetDispCopySrc(0,0,rmode->fbWidth,rmode->efbHeight);
GX_SetDispCopyDst(rmode->fbWidth,xfbHeight);
GX_SetCopyFilter(rmode->aa,rmode->sample_pattern,GX_TRUE,rmode->vfilter);
GX_SetFieldMode(rmode->field_rendering,((rmode->viHeight==2*rmode->xfbHeight)?GX_ENABLE:GX_DISABLE));
GX_SetCullMode(GX_CULL_NONE);
GX_CopyDisp(frameBuffer[fb],GX_TRUE);
GX_SetDispCopyGamma(GX_GM_1_0);
// setup the vertex descriptor
// tells the flipper to expect direct data
GX_ClearVtxDesc();
GX_SetVtxDesc(GX_VA_POS, GX_DIRECT);
GX_SetVtxDesc(GX_VA_CLR0, GX_DIRECT);
// setup the vertex attribute table
// describes the data
// args: vat location 0-7, type of data, data format, size, scale
// so for ex. in the first call we are sending position data with
// 3 values X,Y,Z of size F32. scale sets the number of fractional
// bits for non float data.
GX_SetVtxAttrFmt(GX_VTXFMT0, GX_VA_POS, GX_POS_XYZ, GX_F32, 0);
GX_SetVtxAttrFmt(GX_VTXFMT0, GX_VA_CLR0, GX_CLR_RGBA, GX_RGB8, 0);
GX_SetNumChans(1);
GX_SetNumTexGens(0);
GX_SetTevOrder(GX_TEVSTAGE0, GX_TEXCOORDNULL, GX_TEXMAP_NULL, GX_COLOR0A0);
GX_SetTevOp(GX_TEVSTAGE0, GX_PASSCLR);
// setup our camera at the origin
// looking down the -z axis with y up
guVector cam = {0.0F, 0.0F, 0.0F},
up = {0.0F, 1.0F, 0.0F},
look = {0.0F, 0.0F, -1.0F};
guLookAt(view, &cam, &up, &look);
// setup our projection matrix
// this creates a perspective matrix with a view angle of 90,
// and aspect ratio based on the display resolution
f32 w = rmode->viWidth;
f32 h = rmode->viHeight;
guPerspective(perspective, 45, (f32)w/h, 0.1F, 300.0F);
GX_LoadProjectionMtx(perspective, GX_PERSPECTIVE);
guVector Yaxis = {0,1,0};
guVector Xaxis = {1,0,0};
while(1) {
WPAD_ScanPads();
if (WPAD_ButtonsDown(0) & WPAD_BUTTON_HOME) exit(0);
// do this before drawing
GX_SetViewport(0,0,rmode->fbWidth,rmode->efbHeight,0,1);
guMtxIdentity(model);
guMtxRotAxisDeg(model, &Yaxis, rtri);
guMtxTransApply(model, model, -1.5f,0.0f,-6.0f);
guMtxConcat(view,model,modelview);
// load the modelview matrix into matrix memory
GX_LoadPosMtxImm(modelview, GX_PNMTX0);
GX_Begin(GX_TRIANGLES, GX_VTXFMT0, 3);
GX_Position3f32( 0.0f, 1.0f, 0.0f); // Top
GX_Color3f32(1.0f,0.0f,0.0f); // Set The Color To Red
GX_Position3f32(-1.0f,-1.0f, 0.0f); // Bottom Left
GX_Color3f32(0.0f,1.0f,0.0f); // Set The Color To Green
GX_Position3f32( 1.0f,-1.0f, 0.0f); // Bottom Right
GX_Color3f32(0.0f,0.0f,1.0f); // Set The Color To Blue
GX_End();
guMtxIdentity(model);
guMtxRotAxisDeg(model, &Xaxis, rquad);
guMtxTransApply(model, model, 1.5f,0.0f,-6.0f);
guMtxConcat(view,model,modelview);
// load the modelview matrix into matrix memory
GX_LoadPosMtxImm(modelview, GX_PNMTX0);
GX_Begin(GX_QUADS, GX_VTXFMT0, 4); // Draw A Quad
GX_Position3f32(-1.0f, 1.0f, 0.0f); // Top Left
GX_Color3f32(0.5f,0.5f,1.0f); // Set The Color To Blue
GX_Position3f32( 1.0f, 1.0f, 0.0f); // Top Right
GX_Color3f32(0.5f,0.5f,1.0f); // Set The Color To Blue
GX_Position3f32( 1.0f,-1.0f, 0.0f); // Bottom Right
GX_Color3f32(0.5f,0.5f,1.0f); // Set The Color To Blue
GX_Position3f32(-1.0f,-1.0f, 0.0f); // Bottom Left
GX_Color3f32(0.5f,0.5f,1.0f); // Set The Color To Blue
GX_End(); // Done Drawing The Quad
// do this stuff after drawing
GX_DrawDone();
fb ^= 1; // flip framebuffer
GX_SetZMode(GX_TRUE, GX_LEQUAL, GX_TRUE);
GX_SetColorUpdate(GX_TRUE);
GX_CopyDisp(frameBuffer[fb],GX_TRUE);
VIDEO_SetNextFramebuffer(frameBuffer[fb]);
VIDEO_Flush();
VIDEO_WaitVSync();
rtri+=0.2f; // Increase The Rotation Variable For The Triangle ( NEW )
rquad-=0.15f; // Decrease The Rotation Variable For The Quad ( NEW )
}
return 0;
}
