void SCH_EDIT_FRAME::OnUpdateBusOrientation( wxUpdateUIEvent& aEvent )
{
wxString tool_tip = GetForceHVLines() ?
_( "Draw wires and buses in any direction" ) :
_( "Draw horizontal and vertical wires and buses only" );
aEvent.Check( GetForceHVLines() );
m_optionsToolBar->SetToolShortHelp( ID_TB_OPTIONS_BUS_WIRES_ORIENT, tool_tip );
}
void SCH_EDIT_FRAME::OnSetOptions( wxCommandEvent& event )
{
wxArrayString units;
GRIDS grid_list;
GetScreen()->GetGrids( grid_list );
DIALOG_EESCHEMA_OPTIONS dlg( this );
units.Add( GetUnitsLabel( INCHES ) );
units.Add( GetUnitsLabel( MILLIMETRES ) );
dlg.SetUnits( units, g_UserUnit );
dlg.SetGridSizes( grid_list, GetScreen()->GetGridId() );
dlg.SetBusWidth( GetDefaultBusThickness() );
dlg.SetLineWidth( GetDefaultLineThickness() );
dlg.SetTextSize( GetDefaultLabelSize() );
dlg.SetRepeatHorizontal( g_RepeatStep.x );
dlg.SetRepeatVertical( g_RepeatStep.y );
dlg.SetRepeatLabel( g_RepeatDeltaLabel );
dlg.SetAutoSaveInterval( GetAutoSaveInterval() / 60 );
dlg.SetRefIdSeparator( LIB_COMPONENT::GetSubpartIdSeparator( ),
LIB_COMPONENT::GetSubpartFirstId() );
dlg.SetShowGrid( IsGridVisible() );
dlg.SetShowHiddenPins( m_showAllPins );
dlg.SetEnableMiddleButtonPan( m_canvas->GetEnableMiddleButtonPan() );
dlg.SetEnableZoomNoCenter( m_canvas->GetEnableZoomNoCenter() );
dlg.SetMiddleButtonPanLimited( m_canvas->GetMiddleButtonPanLimited() );
dlg.SetEnableAutoPan( m_canvas->GetEnableAutoPan() );
dlg.SetEnableHVBusOrientation( GetForceHVLines() );
dlg.SetShowPageLimits( g_ShowPageLimits );
dlg.Layout();
dlg.Fit();
dlg.SetMinSize( dlg.GetSize() );
const TEMPLATE_FIELDNAMES& tfnames = m_TemplateFieldNames.GetTemplateFieldNames();
for( unsigned i=0; i<tfnames.size(); ++i )
{
DBG(printf("dlg.SetFieldName(%d, '%s')\n", i, TO_UTF8( tfnames[i].m_Name) );)
dlg.SetFieldName( i, tfnames[i].m_Name );
}
void SCH_EDIT_FRAME::BeginSegment( wxDC* DC, int type )
{
SCH_LINE* segment;
SCH_LINE* nextSegment;
wxPoint cursorpos = GetCrossHairPosition();
// We should know if a segment is currently in progress
segment = (SCH_LINE*) GetScreen()->GetCurItem();
if( segment ) // a current item exists, but not necessary a currently edited item
{
if( !segment->GetFlags() || ( segment->Type() != SCH_LINE_T ) )
{
if( segment->GetFlags() )
{
wxLogDebug( wxT( "BeginSegment: item->GetFlags()== %X" ),
segment->GetFlags() );
}
// no wire, bus or graphic line in progress
segment = NULL;
}
}
if( !segment ) // first point : Create the first wire or bus segment
{
switch( type )
{
default:
segment = new SCH_LINE( cursorpos, LAYER_NOTES );
break;
case LAYER_WIRE:
segment = new SCH_LINE( cursorpos, LAYER_WIRE );
/* A junction will be created later, when we'll know the
* segment end position, and if the junction is really needed */
break;
case LAYER_BUS:
segment = new SCH_LINE( cursorpos, LAYER_BUS );
break;
}
segment->SetFlags( IS_NEW );
s_wires.PushBack( segment );
GetScreen()->SetCurItem( segment );
// We need 2 segments to go from a given start pin to an end point when the horizontal
// and vertical lines only switch is on.
if( GetForceHVLines() )
{
nextSegment = new SCH_LINE( *segment );
nextSegment->SetFlags( IS_NEW );
s_wires.PushBack( nextSegment );
GetScreen()->SetCurItem( nextSegment );
}
m_canvas->SetMouseCapture( DrawSegment, AbortCreateNewLine );
SetRepeatItem( NULL );
}
else // A segment is in progress: terminates the current segment and add a new segment.
{
SCH_LINE* prevSegment = segment->Back();
// Be aware prevSegment can be null when the horizontal and vertical lines only switch is off
// when we create the first segment.
if( !GetForceHVLines() )
{
// If only one segment is needed and it has a zero length, do not create a new one.
if( segment->IsNull() )
return;
}
else
{
wxCHECK_RET( prevSegment != NULL, wxT( "Failed to create second line segment." ) );
// If two segments are required and they both have zero length, do not
// create a new one.
if( prevSegment && prevSegment->IsNull() && segment->IsNull() )
return;
}
m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );
// Terminate the command if the end point is on a pin, junction, or another wire or bus.
if( GetScreen()->IsTerminalPoint( cursorpos, segment->GetLayer() ) )
{
EndSegment( DC );
return;
}
// Create a new segment, and chain it after the current new segment.
nextSegment = new SCH_LINE( *segment );
nextSegment->SetStartPoint( cursorpos );
s_wires.PushBack( nextSegment );
segment->SetEndPoint( cursorpos );
segment->ClearFlags( IS_NEW );
segment->SetFlags( SELECTED );
nextSegment->SetFlags( IS_NEW );
GetScreen()->SetCurItem( nextSegment );
m_canvas->CallMouseCapture( DC, wxDefaultPosition, false );
}
}
void SCH_EDIT_FRAME::OnPreferencesOptions( wxCommandEvent& event )
{
wxArrayString units;
GRIDS grid_list = GetScreen()->GetGrids();
bool saveProjectConfig = false;
DIALOG_EESCHEMA_OPTIONS dlg( this );
units.Add( GetUnitsLabel( INCHES ) );
units.Add( GetUnitsLabel( MILLIMETRES ) );
dlg.SetUnits( units, g_UserUnit );
dlg.SetGridSizes( grid_list, GetScreen()->GetGridCmdId() );
dlg.SetBusWidth( GetDefaultBusThickness() );
dlg.SetLineWidth( GetDefaultLineThickness() );
dlg.SetTextSize( GetDefaultTextSize() );
dlg.SetRepeatHorizontal( GetRepeatStep().x );
dlg.SetRepeatVertical( GetRepeatStep().y );
dlg.SetRepeatLabel( GetRepeatDeltaLabel() );
dlg.SetAutoSaveInterval( GetAutoSaveInterval() / 60 );
dlg.SetRefIdSeparator( LIB_PART::GetSubpartIdSeparator(),
LIB_PART::GetSubpartFirstId() );
dlg.SetShowGrid( IsGridVisible() );
dlg.SetShowHiddenPins( m_showAllPins );
dlg.SetEnableMousewheelPan( m_canvas->GetEnableMousewheelPan() );
dlg.SetEnableZoomNoCenter( m_canvas->GetEnableZoomNoCenter() );
dlg.SetEnableAutoPan( m_canvas->GetEnableAutoPan() );
dlg.SetEnableHVBusOrientation( GetForceHVLines() );
dlg.SetShowPageLimits( m_showPageLimits );
dlg.SetFootprintPreview( m_footprintPreview );
dlg.SetAutoplaceFields( m_autoplaceFields );
dlg.SetAutoplaceJustify( m_autoplaceJustify );
dlg.SetAutoplaceAlign( m_autoplaceAlign );
dlg.Layout();
dlg.Fit();
dlg.SetMinSize( dlg.GetSize() );
dlg.SetTemplateFields( m_TemplateFieldNames.GetTemplateFieldNames() );
if( dlg.ShowModal() == wxID_CANCEL )
return;
g_UserUnit = (EDA_UNITS_T)dlg.GetUnitsSelection();
wxRealPoint gridsize = grid_list[ (size_t) dlg.GetGridSelection() ].m_Size;
m_LastGridSizeId = GetScreen()->SetGrid( gridsize );
int sep, firstId;
dlg.GetRefIdSeparator( sep, firstId);
if( sep != (int)LIB_PART::GetSubpartIdSeparator() ||
firstId != (int)LIB_PART::GetSubpartFirstId() )
{
LIB_PART::SetSubpartIdNotation( sep, firstId );
saveProjectConfig = true;
}
SetDefaultBusThickness( dlg.GetBusWidth() );
SetDefaultLineThickness( dlg.GetLineWidth() );
if( dlg.GetTextSize() != GetDefaultTextSize() )
{
SetDefaultTextSize( dlg.GetTextSize() );
saveProjectConfig = true;
}
wxPoint step;
step.x = dlg.GetRepeatHorizontal();
step.y = dlg.GetRepeatVertical();
SetRepeatStep( step );
SetRepeatDeltaLabel( dlg.GetRepeatLabel() );
SetAutoSaveInterval( dlg.GetAutoSaveInterval() * 60 );
SetGridVisibility( dlg.GetShowGrid() );
m_showAllPins = dlg.GetShowHiddenPins();
m_canvas->SetEnableMousewheelPan( dlg.GetEnableMousewheelPan() );
m_canvas->SetEnableZoomNoCenter( dlg.GetEnableZoomNoCenter() );
m_canvas->SetEnableAutoPan( dlg.GetEnableAutoPan() );
SetForceHVLines( dlg.GetEnableHVBusOrientation() );
m_showPageLimits = dlg.GetShowPageLimits();
m_autoplaceFields = dlg.GetAutoplaceFields();
m_autoplaceJustify = dlg.GetAutoplaceJustify();
m_autoplaceAlign = dlg.GetAutoplaceAlign();
m_footprintPreview = dlg.GetFootprintPreview();
// Delete all template fieldnames and then restore them using the template field data from
// the options dialog
DeleteAllTemplateFieldNames();
TEMPLATE_FIELDNAMES newFieldNames = dlg.GetTemplateFields();
for( TEMPLATE_FIELDNAMES::iterator dlgfld = newFieldNames.begin();
dlgfld != newFieldNames.end(); ++dlgfld )
{
TEMPLATE_FIELDNAME fld = *dlgfld;
AddTemplateFieldName( fld );
}
SaveSettings( config() ); // save values shared by eeschema applications.
if( saveProjectConfig )
SaveProjectSettings( true );
m_canvas->Refresh( true );
}
