/**
 * Function IsSame
 * test is 2 zones are equivalent:
 * 2 zones are equivalent if they have same parameters and same outlines
 * info relative to filling is not take in account
 * @param aZoneToCompare = zone to compare with "this"
 */
bool ZONE_CONTAINER::IsSame( const ZONE_CONTAINER& aZoneToCompare )
{
    // compare basic parameters:
    if( GetLayer() != aZoneToCompare.GetLayer() )
        return false;

    if( GetNetCode() != aZoneToCompare.GetNetCode() )
        return false;

    if( GetPriority() != aZoneToCompare.GetPriority() )
        return false;

    // Compare zone specific parameters
    if( GetIsKeepout() != aZoneToCompare.GetIsKeepout() )
        return false;

    if( GetIsKeepout() )
    {
        if(  GetDoNotAllowCopperPour() != aZoneToCompare.GetDoNotAllowCopperPour() )
            return false;

        if(  GetDoNotAllowVias() != aZoneToCompare.GetDoNotAllowVias() )
            return false;

        if(  GetDoNotAllowTracks() != aZoneToCompare.GetDoNotAllowTracks() )
            return false;
    }

    if( m_ArcToSegmentsCount != aZoneToCompare.GetArcSegmentCount() )
        return false;

    if( m_ZoneClearance != aZoneToCompare.m_ZoneClearance )
        return false;

    if( m_ZoneMinThickness != aZoneToCompare.GetMinThickness() )
        return false;

    if( m_FillMode != aZoneToCompare.GetFillMode() )
        return false;

    if( m_PadConnection != aZoneToCompare.m_PadConnection )
        return false;

    if( m_ThermalReliefGap != aZoneToCompare.m_ThermalReliefGap )
        return false;

    if( m_ThermalReliefCopperBridge != aZoneToCompare.m_ThermalReliefCopperBridge )
        return false;


    // Compare outlines
    wxASSERT( m_Poly );                                      // m_Poly == NULL Should never happen
    wxASSERT( aZoneToCompare.Outline() );

    if( Outline()->m_CornersList.GetList() !=
        aZoneToCompare.Outline()->m_CornersList.GetList() )    // Compare vector
        return false;

    return true;
}
wxString ZONE_CONTAINER::GetSelectMenuText() const
{
    wxString text;
    NETINFO_ITEM* net;
    BOARD* board = GetBoard();

    int ncont = m_Poly->GetContour( m_CornerSelection );

    if( ncont )
        text << wxT( " " ) << _( "(Cutout)" );

    if( GetIsKeepout() )
        text << wxT( " " ) << _( "(Keepout)" );

    text << wxString::Format( wxT( " (%08lX)" ), m_TimeStamp );

    // Display net name for copper zones
    if( !GetIsKeepout() )
    {
        if( GetNetCode() >= 0 )
        {
            if( board )
            {
                net = GetNet();

                if( net )
                {
                    text << wxT( " [" ) << net->GetNetname() << wxT( "]" );
                }
            }
            else
            {
                text << _( "** NO BOARD DEFINED **" );
            }
        }
        else
        {   // A netcode < 0 is an error:
            // Netname not found or area not initialised
            text << wxT( " [" ) << GetNetname() << wxT( "]" );
            text << wxT( " <" ) << _( "Not Found" ) << wxT( ">" );
        }
    }

    wxString msg;
    msg.Printf( _( "Zone Outline %s on %s" ), GetChars( text ),
                 GetChars( GetLayerName() ) );

    return msg;
}
Exemple #3
0
void ZONE_SETTINGS::ExportSetting( ZONE_CONTAINER& aTarget, bool aFullExport ) const
{
    aTarget.SetFillMode( m_FillMode );
    aTarget.SetZoneClearance( m_ZoneClearance );
    aTarget.SetMinThickness( m_ZoneMinThickness );
    aTarget.SetArcSegmentCount( m_ArcToSegmentsCount );
    aTarget.SetThermalReliefGap( m_ThermalReliefGap );
    aTarget.SetThermalReliefCopperBridge( m_ThermalReliefCopperBridge );
    aTarget.SetPadConnection( m_PadConnection );
    aTarget.SetCornerSmoothingType( m_cornerSmoothingType );
    aTarget.SetCornerRadius( m_cornerRadius );
    aTarget.SetIsKeepout( GetIsKeepout() );
    aTarget.SetDoNotAllowCopperPour( GetDoNotAllowCopperPour() );
    aTarget.SetDoNotAllowVias( GetDoNotAllowVias() );
    aTarget.SetDoNotAllowTracks( GetDoNotAllowTracks() );

    if( aFullExport )
    {
        aTarget.SetPriority( m_ZonePriority );
        aTarget.SetNet( m_NetcodeSelection );
        aTarget.SetLayer( m_CurrentZone_Layer );
        aTarget.Outline()->SetLayer( m_CurrentZone_Layer );
    }

    // call SetHatch last, because hatch lines will be rebuilt,
    // using new parameters values
    aTarget.Outline()->SetHatch( m_Zone_HatchingStyle, Mils2iu( 20 ), true );
}
void ZONE_CONTAINER::GetMsgPanelInfo( std::vector< MSG_PANEL_ITEM >& aList )
{
    wxString msg;

    msg = _( "Zone Outline" );

    // Display Cutout instead of Outline for holes inside a zone
    // i.e. when num contour !=0
    int ncont = m_Poly->GetContour( m_CornerSelection );

    if( ncont )
        msg << wxT( " " ) << _( "(Cutout)" );

    aList.push_back( MSG_PANEL_ITEM( _( "Type" ), msg, DARKCYAN ) );

    if( GetIsKeepout() )
    {
        msg.Empty();

        if( GetDoNotAllowVias() )
            AccumulateDescription( msg, _("No via") );

        if( GetDoNotAllowTracks() )
            AccumulateDescription( msg, _("No track") );

        if( GetDoNotAllowCopperPour() )
            AccumulateDescription( msg, _("No copper pour") );

        aList.push_back( MSG_PANEL_ITEM( _( "Keepout" ), msg, RED ) );
    }
    else if( IsOnCopperLayer() )
    {
        if( GetNetCode() >= 0 )
        {
            NETINFO_ITEM* equipot = GetNet();

            if( equipot )
                msg = equipot->GetNetname();
            else
                msg = wxT( "<noname>" );
        }
        else // a netcode < 0 is an error
        {
            msg = wxT( " [" );
            msg << GetNetname() + wxT( "]" );
            msg << wxT( " <" ) << _( "Not Found" ) << wxT( ">" );
        }

        aList.push_back( MSG_PANEL_ITEM( _( "NetName" ), msg, RED ) );

#if 1
        // Display net code : (useful in test or debug)
        msg.Printf( wxT( "%d" ), GetNetCode() );
        aList.push_back( MSG_PANEL_ITEM( _( "NetCode" ), msg, RED ) );
#endif

        // Display priority level
        msg.Printf( wxT( "%d" ), GetPriority() );
        aList.push_back( MSG_PANEL_ITEM( _( "Priority" ), msg, BLUE ) );
    }
    else
    {
        aList.push_back( MSG_PANEL_ITEM( _( "Non Copper Zone" ), wxEmptyString, RED ) );
    }

    aList.push_back( MSG_PANEL_ITEM( _( "Layer" ), GetLayerName(), BROWN ) );

    msg.Printf( wxT( "%d" ), (int) m_Poly->m_CornersList.GetCornersCount() );
    aList.push_back( MSG_PANEL_ITEM( _( "Corners" ), msg, BLUE ) );

    if( m_FillMode )
        msg = _( "Segments" );
    else
        msg = _( "Polygons" );

    aList.push_back( MSG_PANEL_ITEM( _( "Fill mode" ), msg, BROWN ) );

    // Useful for statistics :
    msg.Printf( wxT( "%d" ), (int) m_Poly->m_HatchLines.size() );
    aList.push_back( MSG_PANEL_ITEM( _( "Hatch lines" ), msg, BLUE ) );

    if( m_FilledPolysList.GetCornersCount() )
    {
        msg.Printf( wxT( "%d" ), (int) m_FilledPolysList.GetCornersCount() );
        aList.push_back( MSG_PANEL_ITEM( _( "Corners in DrawList" ), msg, BLUE ) );
    }
}