/**
* Finds out if a given company's vehicles are allowed to enter a given tile.
* @param owner The owner of the vehicle.
* @param tile The tile that is about to be entered.
* @param enterdir The direction in which the vehicle wants to enter the tile.
* @return true if the vehicle can enter the tile.
* @todo This function should be used in other places than just NPF,
* maybe moved to another file too.
*/
static bool CanEnterTileOwnerCheck(Owner owner, TileIndex tile, DiagDirection enterdir)
{
if (IsTileType(tile, MP_RAILWAY) || // Rail tile (also rail depot)
HasStationTileRail(tile) || // Rail station tile/waypoint
IsRoadDepotTile(tile) || // Road depot tile
IsStandardRoadStopTile(tile)) { // Road station tile (but not drive-through stops)
return IsTileOwner(tile, owner); // You need to own these tiles entirely to use them
}
switch (GetTileType(tile)) {
case MP_ROAD:
/* rail-road crossing : are we looking at the railway part? */
if (IsLevelCrossing(tile) &&
DiagDirToAxis(enterdir) != GetCrossingRoadAxis(tile)) {
return IsTileOwner(tile, owner); // Railway needs owner check, while the street is public
}
break;
case MP_TUNNELBRIDGE:
if (GetTunnelBridgeTransportType(tile) == TRANSPORT_RAIL) {
return IsTileOwner(tile, owner);
}
break;
default:
break;
}
return true; // no need to check
}
static void TPFModeShip(TrackPathFinder *tpf, TileIndex tile, DiagDirection direction)
{
if (IsTileType(tile, MP_TUNNELBRIDGE)) {
/* wrong track type */
if (GetTunnelBridgeTransportType(tile) != TRANSPORT_WATER) return;
DiagDirection dir = GetTunnelBridgeDirection(tile);
/* entering tunnel / bridge? */
if (dir == direction) {
TileIndex endtile = GetOtherTunnelBridgeEnd(tile);
tpf->rd.cur_length += GetTunnelBridgeLength(tile, endtile) + 1;
tile = endtile;
} else {
/* leaving tunnel / bridge? */
if (ReverseDiagDir(dir) != direction) return;
}
}
/* This addition will sometimes overflow by a single tile.
* The use of TILE_MASK here makes sure that we still point at a valid
* tile, and then this tile will be in the sentinel row/col, so GetTileTrackStatus will fail. */
tile = TILE_MASK(tile + TileOffsByDiagDir(direction));
if (++tpf->rd.cur_length > 50) return;
TrackBits bits = TrackStatusToTrackBits(GetTileTrackStatus(tile, TRANSPORT_WATER, 0)) & DiagdirReachesTracks(direction);
if (bits == TRACK_BIT_NONE) return;
assert(TileX(tile) != MapMaxX() && TileY(tile) != MapMaxY());
bool only_one_track = true;
do {
Track track = RemoveFirstTrack(&bits);
if (bits != TRACK_BIT_NONE) only_one_track = false;
RememberData rd = tpf->rd;
/* Change direction 4 times only */
if (!only_one_track && track != tpf->rd.last_choosen_track) {
if (++tpf->rd.depth > 4) {
tpf->rd = rd;
return;
}
tpf->rd.last_choosen_track = track;
}
tpf->the_dir = TrackEnterdirToTrackdir(track, direction);
if (!ShipTrackFollower(tile, tpf, tpf->rd.cur_length)) {
TPFModeShip(tpf, tile, TrackdirToExitdir(tpf->the_dir));
}
tpf->rd = rd;
} while (bits != TRACK_BIT_NONE);
}
/**
* Determine the effective #WaterClass for a ship travelling on a tile.
* @param tile Tile of interest
* @return the waterclass to be used by the ship.
*/
WaterClass GetEffectiveWaterClass(TileIndex tile)
{
if (HasTileWaterClass(tile)) return GetWaterClass(tile);
if (IsTileType(tile, MP_TUNNELBRIDGE)) {
assert(GetTunnelBridgeTransportType(tile) == TRANSPORT_WATER);
return WATER_CLASS_CANAL;
}
if (IsTileType(tile, MP_RAILWAY)) {
assert(GetRailGroundType(tile) == RAIL_GROUND_WATER);
return WATER_CLASS_SEA;
}
NOT_REACHED();
}
void AfterLoadLabelMaps()
{
if (NeedRailTypeConversion()) {
SmallVector<RailType, RAILTYPE_END> railtype_conversion_map;
for (uint i = 0; i < _railtype_list.Length(); i++) {
RailType r = GetRailTypeByLabel(_railtype_list[i]);
if (r == INVALID_RAILTYPE) r = RAILTYPE_BEGIN;
*railtype_conversion_map.Append() = r;
}
for (TileIndex t = 0; t < MapSize(); t++) {
switch (GetTileType(t)) {
case MP_RAILWAY:
SetRailType(t, railtype_conversion_map[GetRailType(t)]);
break;
case MP_ROAD:
if (IsLevelCrossing(t)) {
SetRailType(t, railtype_conversion_map[GetRailType(t)]);
}
break;
case MP_STATION:
if (HasStationRail(t)) {
SetRailType(t, railtype_conversion_map[GetRailType(t)]);
}
break;
case MP_TUNNELBRIDGE:
if (GetTunnelBridgeTransportType(t) == TRANSPORT_RAIL) {
SetRailType(t, railtype_conversion_map[GetRailType(t)]);
}
break;
default:
break;
}
}
}
_railtype_list.Clear();
}
/**
* Updates blocks in _globset buffer
*
* @param owner company whose signals we are updating
* @return state of the first block from _globset
* @pre Company::IsValidID(owner)
*/
static SigSegState UpdateSignalsInBuffer(Owner owner)
{
assert(Company::IsValidID(owner));
bool first = true; // first block?
SigSegState state = SIGSEG_FREE; // value to return
TileIndex tile;
DiagDirection dir;
while (_globset.Get(&tile, &dir)) {
assert(_tbuset.IsEmpty());
assert(_tbdset.IsEmpty());
/* After updating signal, data stored are always MP_RAILWAY with signals.
* Other situations happen when data are from outside functions -
* modification of railbits (including both rail building and removal),
* train entering/leaving block, train leaving depot...
*/
switch (GetTileType(tile)) {
case MP_TUNNELBRIDGE:
/* 'optimization assert' - do not try to update signals when it is not needed */
assert(GetTunnelBridgeTransportType(tile) == TRANSPORT_RAIL);
assert(dir == INVALID_DIAGDIR || dir == ReverseDiagDir(GetTunnelBridgeDirection(tile)));
_tbdset.Add(tile, INVALID_DIAGDIR); // we can safely start from wormhole centre
_tbdset.Add(GetOtherTunnelBridgeEnd(tile), INVALID_DIAGDIR);
break;
case MP_RAILWAY:
if (IsRailDepot(tile)) {
/* 'optimization assert' do not try to update signals in other cases */
assert(dir == INVALID_DIAGDIR || dir == GetRailDepotDirection(tile));
_tbdset.Add(tile, INVALID_DIAGDIR); // start from depot inside
break;
}
/* FALL THROUGH */
case MP_STATION:
case MP_ROAD:
if ((TrackStatusToTrackBits(GetTileTrackStatus(tile, TRANSPORT_RAIL, 0)) & _enterdir_to_trackbits[dir]) != TRACK_BIT_NONE) {
/* only add to set when there is some 'interesting' track */
_tbdset.Add(tile, dir);
_tbdset.Add(tile + TileOffsByDiagDir(dir), ReverseDiagDir(dir));
break;
}
/* FALL THROUGH */
default:
/* jump to next tile */
tile = tile + TileOffsByDiagDir(dir);
dir = ReverseDiagDir(dir);
if ((TrackStatusToTrackBits(GetTileTrackStatus(tile, TRANSPORT_RAIL, 0)) & _enterdir_to_trackbits[dir]) != TRACK_BIT_NONE) {
_tbdset.Add(tile, dir);
break;
}
/* happens when removing a rail that wasn't connected at one or both sides */
continue; // continue the while() loop
}
assert(!_tbdset.Overflowed()); // it really shouldn't overflow by these one or two items
assert(!_tbdset.IsEmpty()); // it wouldn't hurt anyone, but shouldn't happen too
SigFlags flags = ExploreSegment(owner);
if (first) {
first = false;
/* SIGSEG_FREE is set by default */
if (flags & SF_PBS) {
state = SIGSEG_PBS;
} else if ((flags & SF_TRAIN) || ((flags & SF_EXIT) && !(flags & SF_GREEN)) || (flags & SF_FULL)) {
state = SIGSEG_FULL;
}
}
/* do not do anything when some buffer was full */
if (flags & SF_FULL) {
ResetSets(); // free all sets
break;
}
UpdateSignalsAroundSegment(flags);
}
return state;
}
/**
* Search signal block
*
* @param owner owner whose signals we are updating
* @return SigFlags
*/
static SigFlags ExploreSegment(Owner owner)
{
SigFlags flags = SF_NONE;
TileIndex tile;
DiagDirection enterdir;
while (_tbdset.Get(&tile, &enterdir)) {
TileIndex oldtile = tile; // tile we are leaving
DiagDirection exitdir = enterdir == INVALID_DIAGDIR ? INVALID_DIAGDIR : ReverseDiagDir(enterdir); // expected new exit direction (for straight line)
switch (GetTileType(tile)) {
case MP_RAILWAY: {
if (GetTileOwner(tile) != owner) continue; // do not propagate signals on others' tiles (remove for tracksharing)
if (IsRailDepot(tile)) {
if (enterdir == INVALID_DIAGDIR) { // from 'inside' - train just entered or left the depot
if (!(flags & SF_TRAIN) && HasVehicleOnPos(tile, NULL, &TrainOnTileEnum)) flags |= SF_TRAIN;
exitdir = GetRailDepotDirection(tile);
tile += TileOffsByDiagDir(exitdir);
enterdir = ReverseDiagDir(exitdir);
break;
} else if (enterdir == GetRailDepotDirection(tile)) { // entered a depot
if (!(flags & SF_TRAIN) && HasVehicleOnPos(tile, NULL, &TrainOnTileEnum)) flags |= SF_TRAIN;
continue;
} else {
continue;
}
}
TrackBits tracks = GetTrackBits(tile); // trackbits of tile
TrackBits tracks_masked = (TrackBits)(tracks & _enterdir_to_trackbits[enterdir]); // only incidating trackbits
if (tracks == TRACK_BIT_HORZ || tracks == TRACK_BIT_VERT) { // there is exactly one incidating track, no need to check
tracks = tracks_masked;
/* If no train detected yet, and there is not no train -> there is a train -> set the flag */
if (!(flags & SF_TRAIN) && EnsureNoTrainOnTrackBits(tile, tracks).Failed()) flags |= SF_TRAIN;
} else {
if (tracks_masked == TRACK_BIT_NONE) continue; // no incidating track
if (!(flags & SF_TRAIN) && HasVehicleOnPos(tile, NULL, &TrainOnTileEnum)) flags |= SF_TRAIN;
}
if (HasSignals(tile)) { // there is exactly one track - not zero, because there is exit from this tile
Track track = TrackBitsToTrack(tracks_masked); // mask TRACK_BIT_X and Y too
if (HasSignalOnTrack(tile, track)) { // now check whole track, not trackdir
SignalType sig = GetSignalType(tile, track);
Trackdir trackdir = (Trackdir)FindFirstBit((tracks * 0x101) & _enterdir_to_trackdirbits[enterdir]);
Trackdir reversedir = ReverseTrackdir(trackdir);
/* add (tile, reversetrackdir) to 'to-be-updated' set when there is
* ANY conventional signal in REVERSE direction
* (if it is a presignal EXIT and it changes, it will be added to 'to-be-done' set later) */
if (HasSignalOnTrackdir(tile, reversedir)) {
if (IsPbsSignal(sig)) {
flags |= SF_PBS;
} else if (!_tbuset.Add(tile, reversedir)) {
return flags | SF_FULL;
}
}
if (HasSignalOnTrackdir(tile, trackdir) && !IsOnewaySignal(tile, track)) flags |= SF_PBS;
/* if it is a presignal EXIT in OUR direction and we haven't found 2 green exits yes, do special check */
if (!(flags & SF_GREEN2) && IsPresignalExit(tile, track) && HasSignalOnTrackdir(tile, trackdir)) { // found presignal exit
if (flags & SF_EXIT) flags |= SF_EXIT2; // found two (or more) exits
flags |= SF_EXIT; // found at least one exit - allow for compiler optimizations
if (GetSignalStateByTrackdir(tile, trackdir) == SIGNAL_STATE_GREEN) { // found green presignal exit
if (flags & SF_GREEN) flags |= SF_GREEN2;
flags |= SF_GREEN;
}
}
continue;
}
}
for (DiagDirection dir = DIAGDIR_BEGIN; dir < DIAGDIR_END; dir++) { // test all possible exit directions
if (dir != enterdir && (tracks & _enterdir_to_trackbits[dir])) { // any track incidating?
TileIndex newtile = tile + TileOffsByDiagDir(dir); // new tile to check
DiagDirection newdir = ReverseDiagDir(dir); // direction we are entering from
if (!MaybeAddToTodoSet(newtile, newdir, tile, dir)) return flags | SF_FULL;
}
}
continue; // continue the while() loop
}
case MP_STATION:
if (!HasStationRail(tile)) continue;
if (GetTileOwner(tile) != owner) continue;
if (DiagDirToAxis(enterdir) != GetRailStationAxis(tile)) continue; // different axis
if (IsStationTileBlocked(tile)) continue; // 'eye-candy' station tile
if (!(flags & SF_TRAIN) && HasVehicleOnPos(tile, NULL, &TrainOnTileEnum)) flags |= SF_TRAIN;
tile += TileOffsByDiagDir(exitdir);
break;
case MP_ROAD:
if (!IsLevelCrossing(tile)) continue;
if (GetTileOwner(tile) != owner) continue;
if (DiagDirToAxis(enterdir) == GetCrossingRoadAxis(tile)) continue; // different axis
if (!(flags & SF_TRAIN) && HasVehicleOnPos(tile, NULL, &TrainOnTileEnum)) flags |= SF_TRAIN;
tile += TileOffsByDiagDir(exitdir);
break;
case MP_TUNNELBRIDGE: {
if (GetTileOwner(tile) != owner) continue;
if (GetTunnelBridgeTransportType(tile) != TRANSPORT_RAIL) continue;
DiagDirection dir = GetTunnelBridgeDirection(tile);
if (enterdir == INVALID_DIAGDIR) { // incoming from the wormhole
if (!(flags & SF_TRAIN) && HasVehicleOnPos(tile, NULL, &TrainOnTileEnum)) flags |= SF_TRAIN;
enterdir = dir;
exitdir = ReverseDiagDir(dir);
tile += TileOffsByDiagDir(exitdir); // just skip to next tile
} else { // NOT incoming from the wormhole!
if (ReverseDiagDir(enterdir) != dir) continue;
if (!(flags & SF_TRAIN) && HasVehicleOnPos(tile, NULL, &TrainOnTileEnum)) flags |= SF_TRAIN;
tile = GetOtherTunnelBridgeEnd(tile); // just skip to exit tile
enterdir = INVALID_DIAGDIR;
exitdir = INVALID_DIAGDIR;
}
}
break;
default:
continue; // continue the while() loop
}
if (!MaybeAddToTodoSet(tile, enterdir, oldtile, exitdir)) return flags | SF_FULL;
}
return flags;
}
