void PageOutput::OnUpdateContainerFields() {
enum_container container = GetContainer();
unsigned int container_av = GetContainerAV();
// show/hide fields
GroupVisible({m_label_container_av, m_combobox_container_av}, (container == CONTAINER_OTHER));
// mark uninstalled or unsupported codecs
for(unsigned int i = 0; i < VIDEO_CODEC_OTHER; ++i) {
QString name = m_video_codecs[i].name;
if(!AVCodecIsInstalled(m_video_codecs[i].avname))
name += " (" + tr("not installed") + ")";
else if(container != CONTAINER_OTHER && !m_containers[container].supported_video_codecs.count((enum_video_codec) i))
name += " (" + tr("not supported by container") + ")";
m_combobox_video_codec->setItemText(i, name);
}
for(unsigned int i = 0; i < AUDIO_CODEC_OTHER; ++i) {
QString name = m_audio_codecs[i].name;
if(!AVCodecIsInstalled(m_audio_codecs[i].avname))
name += " (" + tr("not installed") + ")";
else if(container != CONTAINER_OTHER && !m_containers[container].supported_audio_codecs.count((enum_audio_codec) i))
name += " (" + tr("not supported by container") + ")";
m_combobox_audio_codec->setItemText(i, name);
}
m_old_container = container;
m_old_container_av = container_av;
}
void PageRecord::StartPage() {
if(m_page_started)
return;
assert(!m_input_started);
assert(!m_output_started);
// save the settings in case libav/ffmpeg decides to kill the process
m_main_window->SaveSettings();
// clear the log
m_textedit_log->clear();
// clear the preview
if(m_previewing) {
m_video_previewer->Reset();
m_audio_previewer->Reset();
}
PageInput *page_input = m_main_window->GetPageInput();
PageOutput *page_output = m_main_window->GetPageOutput();
// get the video input settings
m_video_area = page_input->GetVideoArea();
m_video_x = page_input->GetVideoX();
m_video_y = page_input->GetVideoY();
if(m_video_area == PageInput::VIDEO_AREA_GLINJECT) {
m_video_in_width = 0;
m_video_in_height = 0;
} else {
m_video_in_width = page_input->GetVideoW();
m_video_in_height = page_input->GetVideoH();
}
m_video_frame_rate = page_input->GetVideoFrameRate();
m_video_scaling = page_input->GetVideoScalingEnabled();
m_video_scaled_width = page_input->GetVideoScaledW();
m_video_scaled_height = page_input->GetVideoScaledH();
m_video_record_cursor = page_input->GetVideoRecordCursor();
// get the audio input settings
m_audio_enabled = page_input->GetAudioEnabled();
m_audio_channels = 2;
m_audio_sample_rate = 44100;
m_audio_backend = page_input->GetAudioBackend();
m_alsa_source = page_input->GetALSASourceName();
#if SSR_USE_PULSEAUDIO
m_pulseaudio_source = page_input->GetPulseAudioSourceName();
#endif
#if SSR_USE_JACK
bool jack_connect_system_capture = page_input->GetJackConnectSystemCapture();
bool jack_connect_system_playback = page_input->GetJackConnectSystemPlayback();
#endif
// get the glinject settings
QString glinject_channel = page_input->GetGLInjectChannel();
bool glinject_relax_permissions = page_input->GetGLInjectRelaxPermissions();
QString glinject_command = page_input->GetGLInjectCommand();
QString glinject_working_directory = page_input->GetGLInjectWorkingDirectory();
bool glinject_auto_launch = page_input->GetGLInjectAutoLaunch();
bool glinject_limit_fps = page_input->GetGLInjectLimitFPS();
// get file settings
m_file_base = page_output->GetFile();
m_file_protocol = page_output->GetFileProtocol();
m_separate_files = page_output->GetSeparateFiles();
// get the output settings
if(m_separate_files)
m_output_settings.file = QString(); // will be set later
else
m_output_settings.file = m_file_base;
m_output_settings.container_avname = page_output->GetContainerAVName();
m_output_settings.video_codec_avname = page_output->GetVideoCodecAVName();
m_output_settings.video_kbit_rate = page_output->GetVideoKBitRate();
m_output_settings.video_options.clear();
m_output_settings.video_width = 0;
m_output_settings.video_height = 0;
m_output_settings.video_frame_rate = m_video_frame_rate;
m_output_settings.video_allow_frame_skipping = page_output->GetVideoAllowFrameSkipping();
m_output_settings.audio_codec_avname = (m_audio_enabled)? page_output->GetAudioCodecAVName() : QString();
m_output_settings.audio_kbit_rate = page_output->GetAudioKBitRate();
m_output_settings.audio_options.clear();
m_output_settings.audio_channels = m_audio_channels;
m_output_settings.audio_sample_rate = m_audio_sample_rate;
// some codec-specific things
// you can get more information about all these options by running 'ffmpeg -h' or 'avconv -h' from a terminal
switch(page_output->GetVideoCodec()) {
case PageOutput::VIDEO_CODEC_H264: {
// x264 has a 'constant quality' mode, where the bit rate is simply set to whatever is needed to keep a certain quality. The quality is set
// with the 'crf' option. 'preset' changes the encoding speed (and hence the efficiency of the compression) but doesn't really influence the quality,
// which is great because it means you don't have to experiment with different bit rates and different speeds to get good results.
m_output_settings.video_options.push_back(std::make_pair(QString("crf"), QString::number(page_output->GetH264CRF())));
m_output_settings.video_options.push_back(std::make_pair(QString("preset"), EnumToString(page_output->GetH264Preset())));
break;
}
case PageOutput::VIDEO_CODEC_VP8: {
// The names of there parameters are very unintuitive. The two options we care about (because they change the speed) are 'deadline' and 'cpu-used'.
// 'deadline=best' is unusably slow. 'deadline=good' is the normal setting, it tells the encoder to use the speed set with 'cpu-used'. Higher
// numbers will use *less* CPU, confusingly, so a higher number is faster. I haven't done much testing with 'realtime' so I'm not sure if it's a good idea here.
// It sounds useful, but I think it will use so much CPU that it will slow down the program that is being recorded.
m_output_settings.video_options.push_back(std::make_pair(QString("deadline"), QString("good")));
m_output_settings.video_options.push_back(std::make_pair(QString("cpu-used"), QString::number(page_output->GetVP8CPUUsed())));
break;
}
case PageOutput::VIDEO_CODEC_OTHER: {
m_output_settings.video_options = GetOptionsFromString(page_output->GetVideoOptions());
break;
}
default: break; // to keep GCC happy
}
switch(page_output->GetAudioCodec()) {
case PageOutput::AUDIO_CODEC_OTHER: {
m_output_settings.audio_options = GetOptionsFromString(page_output->GetAudioOptions());
break;
}
default: break; // to keep GCC happy
}
// hide the audio previewer if there is no audio
GroupVisible({m_label_mic_icon, m_audio_previewer}, m_audio_enabled);
Logger::LogInfo("[PageRecord::StartPage] " + tr("Starting page ..."));
try {
// for OpenGL recording, create the input now
if(m_video_area == PageInput::VIDEO_AREA_GLINJECT) {
if(glinject_auto_launch)
GLInjectInput::LaunchApplication(glinject_channel, glinject_relax_permissions, glinject_command, glinject_working_directory);
m_gl_inject_input.reset(new GLInjectInput(glinject_channel, glinject_relax_permissions, m_video_record_cursor, glinject_limit_fps, m_video_frame_rate));
}
#if SSR_USE_JACK
if(m_audio_enabled) {
// for JACK, start the input now
if(m_audio_backend == PageInput::AUDIO_BACKEND_JACK)
m_jack_input.reset(new JACKInput(jack_connect_system_capture, jack_connect_system_playback));
}
#endif
} catch(...) {
Logger::LogError("[PageRecord::StartPage] " + tr("Error: Something went wrong during initialization."));
m_gl_inject_input.reset();
#if SSR_USE_JACK
m_jack_input.reset();
#endif
}
Logger::LogInfo("[PageRecord::StartPage] " + tr("Started page."));
m_page_started = true;
m_recorded_something = false;
m_wait_saving = false;
UpdateSysTray();
OnUpdateHotkey();
OnUpdateSoundNotifications();
UpdateInput();
OnUpdateInformation();
m_timer_update_info->start(1000);
}
void PageRecord::StartPage() {
if(m_page_started)
return;
assert(!m_input_started);
assert(!m_output_started);
// save the settings in case libav/ffmpeg decides to kill the process
m_main_window->SaveSettings();
// clear the log
m_textedit_log->clear();
// clear the preview
if(m_previewing) {
m_video_previewer->Reset();
m_audio_previewer->Reset();
}
PageInput *page_input = m_main_window->GetPageInput();
PageOutput *page_output = m_main_window->GetPageOutput();
// get the video input settings
m_video_area = page_input->GetVideoArea();
m_video_area_follow_fullscreen = page_input->GetVideoAreaFollowFullscreen();
m_video_x = page_input->GetVideoX();
m_video_y = page_input->GetVideoY();
#if SSR_USE_OPENGL_RECORDING
if(m_video_area == PageInput::VIDEO_AREA_GLINJECT) {
m_video_in_width = 0;
m_video_in_height = 0;
} else {
#else
{
#endif
m_video_in_width = page_input->GetVideoW();
m_video_in_height = page_input->GetVideoH();
}
m_video_in_width = page_input->GetVideoW();
m_video_in_height = page_input->GetVideoH();
m_video_frame_rate = page_input->GetVideoFrameRate();
m_video_scaling = page_input->GetVideoScalingEnabled();
m_video_scaled_width = page_input->GetVideoScaledW();
m_video_scaled_height = page_input->GetVideoScaledH();
m_video_record_cursor = page_input->GetVideoRecordCursor();
// get the audio input settings
m_audio_enabled = page_input->GetAudioEnabled();
m_audio_channels = 2;
m_audio_sample_rate = 48000;
m_audio_backend = page_input->GetAudioBackend();
#if SSR_USE_ALSA
m_alsa_source = page_input->GetALSASourceName();
#endif
#if SSR_USE_PULSEAUDIO
m_pulseaudio_source = page_input->GetPulseAudioSourceName();
#endif
#if SSR_USE_JACK
bool jack_connect_system_capture = page_input->GetJackConnectSystemCapture();
bool jack_connect_system_playback = page_input->GetJackConnectSystemPlayback();
#endif
// override sample rate for problematic cases (these are hard-coded for now)
if(page_output->GetContainer() == PageOutput::CONTAINER_OTHER && page_output->GetContainerAVName() == "flv") {
m_audio_sample_rate = 44100;
}
#if SSR_USE_OPENGL_RECORDING
// get the glinject settings
QString glinject_channel = page_input->GetGLInjectChannel();
bool glinject_relax_permissions = page_input->GetGLInjectRelaxPermissions();
QString glinject_command = page_input->GetGLInjectCommand();
QString glinject_working_directory = page_input->GetGLInjectWorkingDirectory();
bool glinject_auto_launch = page_input->GetGLInjectAutoLaunch();
bool glinject_limit_fps = page_input->GetGLInjectLimitFPS();
#endif
// get file settings
m_file_base = page_output->GetFile();
m_file_protocol = page_output->GetFileProtocol();
m_separate_files = page_output->GetSeparateFiles();
m_add_timestamp = page_output->GetAddTimestamp();
// get the output settings
m_output_settings.file = QString(); // will be set later
m_output_settings.container_avname = page_output->GetContainerAVName();
m_output_settings.video_codec_avname = page_output->GetVideoCodecAVName();
m_output_settings.video_kbit_rate = page_output->GetVideoKBitRate();
m_output_settings.video_options.clear();
m_output_settings.video_width = 0;
m_output_settings.video_height = 0;
m_output_settings.video_frame_rate = m_video_frame_rate;
m_output_settings.video_allow_frame_skipping = page_output->GetVideoAllowFrameSkipping();
m_output_settings.audio_codec_avname = (m_audio_enabled)? page_output->GetAudioCodecAVName() : QString();
m_output_settings.audio_kbit_rate = page_output->GetAudioKBitRate();
m_output_settings.audio_options.clear();
m_output_settings.audio_channels = m_audio_channels;
m_output_settings.audio_sample_rate = m_audio_sample_rate;
// some codec-specific things
// you can get more information about all these options by running 'ffmpeg -h' or 'avconv -h' from a terminal
switch(page_output->GetVideoCodec()) {
case PageOutput::VIDEO_CODEC_H264: {
// x264 has a 'constant quality' mode, where the bit rate is simply set to whatever is needed to keep a certain quality. The quality is set
// with the 'crf' option. 'preset' changes the encoding speed (and hence the efficiency of the compression) but doesn't really influence the quality,
// which is great because it means you don't have to experiment with different bit rates and different speeds to get good results.
m_output_settings.video_options.push_back(std::make_pair(QString("crf"), QString::number(page_output->GetH264CRF())));
m_output_settings.video_options.push_back(std::make_pair(QString("preset"), EnumToString(page_output->GetH264Preset())));
break;
}
case PageOutput::VIDEO_CODEC_VP8: {
// The names of there parameters are very unintuitive. The two options we care about (because they change the speed) are 'deadline' and 'cpu-used'.
// 'deadline=best' is unusably slow. 'deadline=good' is the normal setting, it tells the encoder to use the speed set with 'cpu-used'. Higher
// numbers will use *less* CPU, confusingly, so a higher number is faster. I haven't done much testing with 'realtime' so I'm not sure if it's a good idea here.
// It sounds useful, but I think it will use so much CPU that it will slow down the program that is being recorded.
m_output_settings.video_options.push_back(std::make_pair(QString("deadline"), QString("good")));
m_output_settings.video_options.push_back(std::make_pair(QString("cpu-used"), QString::number(page_output->GetVP8CPUUsed())));
break;
}
case PageOutput::VIDEO_CODEC_OTHER: {
m_output_settings.video_options = GetOptionsFromString(page_output->GetVideoOptions());
break;
}
default: break; // to keep GCC happy
}
switch(page_output->GetAudioCodec()) {
case PageOutput::AUDIO_CODEC_OTHER: {
m_output_settings.audio_options = GetOptionsFromString(page_output->GetAudioOptions());
break;
}
default: break; // to keep GCC happy
}
// hide the audio previewer if there is no audio
GroupVisible({m_label_mic_icon, m_audio_previewer}, m_audio_enabled);
Logger::LogInfo("[PageRecord::StartPage] " + tr("Starting page ..."));
try {
#if SSR_USE_OPENGL_RECORDING
// for OpenGL recording, create the input now
if(m_video_area == PageInput::VIDEO_AREA_GLINJECT) {
if(glinject_auto_launch)
GLInjectInput::LaunchApplication(glinject_channel, glinject_relax_permissions, glinject_command, glinject_working_directory);
m_gl_inject_input.reset(new GLInjectInput(glinject_channel, glinject_relax_permissions, m_video_record_cursor, glinject_limit_fps, m_video_frame_rate));
}
#endif
#if SSR_USE_JACK
if(m_audio_enabled) {
// for JACK, start the input now
if(m_audio_backend == PageInput::AUDIO_BACKEND_JACK)
m_jack_input.reset(new JACKInput(jack_connect_system_capture, jack_connect_system_playback));
}
#endif
} catch(...) {
Logger::LogError("[PageRecord::StartPage] " + tr("Error: Something went wrong during initialization."));
#if SSR_USE_OPENGL_RECORDING
m_gl_inject_input.reset();
#endif
#if SSR_USE_JACK
m_jack_input.reset();
#endif
}
Logger::LogInfo("[PageRecord::StartPage] " + tr("Started page."));
m_page_started = true;
m_recorded_something = false;
m_wait_saving = false;
m_error_occurred = false;
UpdateSysTray();
#if SSR_USE_ALSA
OnUpdateSoundNotifications();
#endif
UpdateInput();
OnUpdateInformation();
m_timer_update_info->start(1000);
}
void PageRecord::StopPage(bool save) {
if(!m_page_started)
return;
StopOutput(true);
StopInput();
Logger::LogInfo("[PageRecord::StopPage] " + tr("Stopping page ..."));
if(m_output_manager != NULL) {
// stop the output
if(save)
FinishOutput();
m_output_manager.reset();
// delete the file if it isn't needed
if(!save && m_file_protocol.isNull()) {
if(QFileInfo(m_output_settings.file).exists())
QFile(m_output_settings.file).remove();
}
}
#if SSR_USE_OPENGL_RECORDING
// stop GLInject input
m_gl_inject_input.reset();
#endif
#if SSR_USE_JACK
// stop JACK input
m_jack_input.reset();
#endif
Logger::LogInfo("[PageRecord::StopPage] " + tr("Stopped page."));
m_page_started = false;
UpdateSysTray();
#if SSR_USE_ALSA
OnUpdateSoundNotifications();
#endif
m_timer_update_info->stop();
OnUpdateInformation();
}
void PageRecord::StartOutput() {
assert(m_page_started);
if(m_output_started)
return;
#if SSR_USE_ALSA
if(m_simple_synth != NULL) {
m_simple_synth->PlaySequence(SEQUENCE_RECORD_START.data(), SEQUENCE_RECORD_START.size());
usleep(200000);
}
#endif
try {
Logger::LogInfo("[PageRecord::StartOutput] " + tr("Starting output ..."));
if(m_output_manager == NULL) {
// set the file name
m_output_settings.file = GetNewSegmentFile(m_file_base, m_add_timestamp);
// for X11 recording, update the video size (if possible)
if(m_x11_input != NULL)
m_x11_input->GetCurrentSize(&m_video_in_width, &m_video_in_height);
#if SSR_USE_OPENGL_RECORDING
// for OpenGL recording, detect the video size
if(m_video_area == PageInput::VIDEO_AREA_GLINJECT && !m_video_scaling) {
if(m_gl_inject_input == NULL) {
Logger::LogError("[PageRecord::StartOutput] " + tr("Error: Could not get the size of the OpenGL application because the GLInject input has not been created."));
throw GLInjectException();
}
m_gl_inject_input->GetCurrentSize(&m_video_in_width, &m_video_in_height);
if(m_video_in_width == 0 && m_video_in_height == 0) {
Logger::LogError("[PageRecord::StartOutput] " + tr("Error: Could not get the size of the OpenGL application. Either the "
"application wasn't started correctly, or the application hasn't created an OpenGL window yet. If "
"you want to start recording before starting the application, you have to enable scaling and enter "
"the video size manually."));
throw GLInjectException();
}
}
#endif
// calculate the output width and height
if(m_video_scaling) {
// Only even width and height is allowed because some pixel formats (e.g. YUV420) require this.
m_output_settings.video_width = m_video_scaled_width / 2 * 2;
m_output_settings.video_height = m_video_scaled_height / 2 * 2;
#if SSR_USE_OPENGL_RECORDING
} else if(m_video_area == PageInput::VIDEO_AREA_GLINJECT) {
// The input size is the size of the OpenGL application and can't be changed. The output size is set to the current size of the application.
m_output_settings.video_width = m_video_in_width / 2 * 2;
m_output_settings.video_height = m_video_in_height / 2 * 2;
#endif
} else {
// If the user did not explicitly select scaling, then don't force scaling just because the recording area is one pixel too large.
// One missing row/column of pixels is probably better than a blurry video (and scaling is SLOW).
m_video_in_width = m_video_in_width / 2 * 2;
m_video_in_height = m_video_in_height / 2 * 2;
m_output_settings.video_width = m_video_in_width;
m_output_settings.video_height = m_video_in_height;
}
// start the output
m_output_manager.reset(new OutputManager(m_output_settings));
} else {
// start a new segment
m_output_manager->GetSynchronizer()->NewSegment();
}
Logger::LogInfo("[PageRecord::StartOutput] " + tr("Started output."));
m_output_started = true;
m_recorded_something = true;
UpdateSysTray();
UpdateRecordPauseButton();
UpdateInput();
} catch(...) {
Logger::LogError("[PageRecord::StartOutput] " + tr("Error: Something went wrong during initialization."));
}
}
