//搜寻指纹
void Find_Finger(void)
{
if(Find_Finger_And_Save_ImageBuffer() == 0){
if(Get_Finger_Feature_Save_To_CharBuffer1() == 0){
if(Search_Finger_In_Finlib(0x01,0x0000,0x0050) == 0){
usRegHoldingBuf[0] = FINGER_FOUND;
sprintf((char *)Show_find_man_num,"Find man %d!",Person_num);
Gui_DrawFont_GBK16(15,80,BLACK,GREEN,(uint8_t *)" ");
Gui_DrawFont_GBK16(15,80,BLACK,GREEN,Show_find_man_num);
TIP_SUCCESS();
}
else
{
usRegHoldingBuf[0] = FINGER_NOT_FIND;
Gui_DrawFont_GBK16(15,80,BLACK,GREEN,(uint8_t *)" ");
Gui_DrawFont_GBK16(18,80,BLACK,GREEN,(uint8_t *)"Can`t Find!");
TIP_FAILED();
}
}
}
else
{
usRegHoldingBuf[0] = NO_FINGER;
}
}
//检测并录入指纹
void Write_Finger(void)
{
buffer1:
while(Find_Finger_And_Save_ImageBuffer() != 0);
while(Get_Finger_Feature_Save_To_CharBuffer1() != 0){goto buffer1;}
buffer2:
while(Find_Finger_And_Save_ImageBuffer() != 0);
while(Get_Finger_Feature_Save_To_CharBuffer2() != 0){goto buffer2;}
while(Combine_Finger_Feature() != 0);
if(Save_Finger_Form_To_Flash_Position(0x01,ReadEffectiveTemplate()) == 0)
{
usRegHoldingBuf[0] = FINGER_WRITE_OK;
#if DEBUG
printf("指纹录入成功\n");
#endif
Gui_DrawFont_GBK16(15,80,BLACK,GREEN,(uint8_t *)" ");
Gui_DrawFont_GBK16(15,80,BLACK,GREEN,(uint8_t *)"Finger In OK!");
TIP_WRITE_SUCCESS();
}
else
{
usRegHoldingBuf[0] = FINGER_WRITE_FAILD;
#if DEBUG
printf("指纹录入失败\n");
#endif
TIP_WRITE_FAILED();
}
}
//删除指纹模板
void Delate_Finger(void)
{
while(Empty_The_FinLib() != 0);
Gui_DrawFont_GBK16(15,80,BLACK,GREEN,(uint8_t *)" ");
Gui_DrawFont_GBK16(18,80,BLACK,GREEN,(uint8_t *)"Delate All!");
TIP_DELATE_ALL();
}
/*
*********************************************************************************************************
* 函 数 名: DispChInfo
* 功能说明: 显示通道信息
* 形 参：无
* 返 回 值: 无
*********************************************************************************************************
*/
static void ChInfoDisp(void)
{
char buf[32]; /* 字符显示缓冲区 */
FONT_T tFont; /* 定义一个字体结构体变量，用于设置字体参数 */
// float tTem;
/* 设置字体属性 */
tFont.usFontCode = FC_ST_16X16; /* 字体选择宋体16点阵，高16x宽15) */
tFont.usTextColor = CL_WHITE; /* 字体颜色设置为白色 */
tFont.usBackColor = CL_BLUE; /* 文字背景颜色，蓝色 */
tFont.usSpace = 0; /* 字符水平间距, 单位 = 像素 */
/* 显示示波器程序版本 */
Gui_DrawFont_GBK16(10, 2, "v.0", &tFont);
strcpy(buf, "CH1 DC");
sprintf(&buf[7], "3.6V");
tFont.usTextColor = CL_YELLOW; /* 设置字体颜色，黄色 */
tFont.usBackColor = CL_MAGENTA; /* 文字背景颜色，紫色 */
Gui_DrawFont_GBK16(10, 224, buf, &tFont);
sprintf(buf, "%.2f",tTemp[3]);
Gui_DrawFont_GBK16(100, 224, buf, &tFont);
/* 显示时基 */
// tFont.usTextColor = CL_WHITE; /* 设置字体颜色，白色 */
// tFont.usBackColor = CL_BLUE; /* 文字背景颜色，蓝色 */
/* 显示每格多长时间，即时间分度 */
// sprintf(buf, "t:%.1fus", Simple_Tim[g_DsoA.SimpleNum]);
// Gui_DrawFont_GBK16(230, 224, buf, &tFont);
/* 显示采样频率 */
//sprintf(buf, "f:%7dHz", Simple_Tim[g_DsoA->SimpleNum]);
//Gui_DrawFont_GBK16(75, 2, buf, &tFont);
}
void TFT_Test()
{
Color_Test();
Num_Test();
Gui_DrawFont_GBK16(10,50,BLUE,GRAY0,"Test ok.");
delay_ms(1000);
}
// Digital Compass
int main(void)
{
uint8_t Res;
int16_t Com_Data[3];
uint16_t x0, y0;
unsigned long angle = 0;
double radian;
/* Setup the microcontroller system. Initialize the Embedded Flash Interface,
initialize the PLL and update the SystemFrequency variable. */
xSysCtlClockSet(72000000, xSYSCTL_OSC_MAIN | xSYSCTL_XTAL_8MHZ);
xSysCtlDelay(10000);
delay_init(72);
Lcd_Init();
HMC5883L_Init();
HMC5883L_Cfg(MODE_SIG | GAIN_1090 | SAMPLE_8 | DATA_RATE_15);
Lcd_Clear(GRAY0);
//
Gui_Circle(64, 80, 50, BLUE);
Gui_DrawFont_GBK16(64,14,BLUE,GRAY0,"N");
Gui_DrawFont_GBK16(64,132,BLUE,GRAY0,"S");
Gui_DrawFont_GBK16(5,80,BLUE,GRAY0,"W");
Gui_DrawFont_GBK16(116,80,BLUE,GRAY0,"E");
while(1){
Res = HMC5883L_DataGet(&Com_Data[0], &Com_Data[1], &Com_Data[2]);
if(Res) break;
angle = (unsigned long) (atan2((double)Com_Data[0],(double)Com_Data[1])*(180/3.14159265)+180);
//angle = rand()%360;
radian = angle * 3.1415926 / 180;
if(angle <= 180){
x0 = 64 + (int16_t)(40 * sin(radian));
y0 = 80 - (int16_t)(40 * cos(radian));
} else {
x0 = 64 + (int16_t)(40 * sin(radian));
y0 = 80 - (int16_t)(40 * cos(radian));
}
Gui_DrawLine(64, 80, x0, y0, BLUE);
delay_ms(500);
Gui_DrawLine(64, 80, x0, y0, GRAY0);
}
return 0;
}
//相关初始化
void Init_sth(void)
{
Lcd_Init();
__HAL_UART_ENABLE_IT(&huart2, UART_IT_IDLE);
HAL_GPIO_WritePin(GPIOA,GPIO_PIN_0,GPIO_PIN_SET);
Lcd_Clear(GREEN);
showimage_farsight(gImage_logo);
Gui_DrawFont_GBK16(28,40,BLUE,GREEN,(uint8_t *)"Touch ID");
}
//show clock
int main()
{
/* Setup the microcontroller system. Initialize the Embedded Flash Interface,
initialize the PLL and update the SystemFrequency variable. */
xSysCtlClockSet(72000000, xSYSCTL_OSC_MAIN | xSYSCTL_XTAL_8MHZ);
xSysCtlDelay(10000);
delay_init(72);
Lcd_Init();
Lcd_Clear(GRAY0);
Gui_DrawFont_GBK16(30,50,BLUE,GRAY0,"Show Clock");
Gui_DrawFont_GBK16(36,70,BLUE,GRAY0,"@ CooCox");
delay_ms(2000);
Lcd_Clear(GRAY0);
while(1){
Show_Clock();
}
}
void Redraw_Mainmenu(void)
{
Lcd_Clear(GRAY0);
Gui_DrawFont_GBK16(16,0,BLUE,GRAY0,"EPI @ CooCox");
Gui_DrawFont_GBK16(16,120,BLUE,GRAY0,"S1:Move. ");
Gui_DrawFont_GBK16(16,140,RED,GRAY0, "S2:Sellect ");
Gui_DrawFont_Num32(100,125,RED,GRAY0,Num[5]);
delay_ms(1000);
Gui_DrawFont_Num32(100,125,RED,GRAY0,Num[4]);
delay_ms(1000);
Gui_DrawFont_Num32(100,125,RED,GRAY0,Num[3]);
delay_ms(1000);
Gui_DrawFont_Num32(100,125,RED,GRAY0,Num[2]);
delay_ms(1000);
Gui_DrawFont_Num32(100,125,RED,GRAY0,Num[1]);
delay_ms(1000);
Gui_DrawFont_Num32(100,125,RED,GRAY0,Num[0]);
}
void Num_Test(void)
{
uint8_t i=0;
Lcd_Clear(GRAY0);
Gui_DrawFont_GBK16(16,20,RED,GRAY0,"Num Test");
delay_ms(1000);
Lcd_Clear(GRAY0);
for(i=0;i<10;i++){
Gui_DrawFont_Num32((i%3)*40,32*(i/3)+30,RED,GRAY0,Num[i+1]);
delay_ms(100);
}
}
void Color_Test(void)
{
uint8_t i = 2;
Lcd_Clear(GRAY0);
Gui_DrawFont_GBK16(20,10,BLUE,GRAY0,"Color Test");
delay_ms(1000);
while(i--){
Lcd_Clear(WHITE);
Lcd_Clear(BLACK);
Lcd_Clear(RED);
Lcd_Clear(GREEN);
Lcd_Clear(BLUE);
}
}