Exemple #1
0
/* ---------------------------------------------------------------------------
    \fn oemData_SendMBOemDataReq
    \brief Request an OEM DATA REQ to be passed down to PE
    \param pMac:
    \param pOemDataReq: Pointer to the oem data request
    \return eHalStatus     
  -------------------------------------------------------------------------------*/
eHalStatus oemData_SendMBOemDataReq(tpAniSirGlobal pMac, tOemDataReq *pOemDataReq)
{
    eHalStatus status = eHAL_STATUS_SUCCESS;
    tSirOemDataReq* pMsg;
    tANI_U16 msgLen;
    tCsrRoamSession *pSession = CSR_GET_SESSION( pMac, pOemDataReq->sessionId );

    smsLog(pMac, LOGW, "OEM_DATA: entering Function %s", __func__);
    
    msgLen = (tANI_U16)(sizeof(tSirOemDataReq));

    status = palAllocateMemory(pMac->hHdd, (void**)&pMsg, msgLen);
    if(HAL_STATUS_SUCCESS(status))
    {
        palZeroMemory(pMac->hHdd, pMsg, msgLen);
        pMsg->messageType = pal_cpu_to_be16((tANI_U16)eWNI_SME_OEM_DATA_REQ);
        palCopyMemory(pMac->hHdd, pMsg->selfMacAddr, pSession->selfMacAddr, sizeof(tSirMacAddr) );
        status = palCopyMemory(pMac->hHdd, pMsg->oemDataReq, pOemDataReq->oemDataReq, OEM_DATA_REQ_SIZE);
        if(HAL_STATUS_SUCCESS(status))
        {
            smsLog(pMac, LOGW, "OEM_DATA: sending message to pe%s", __func__);
            status = palSendMBMessage(pMac->hHdd, pMsg);
        }
        else
        {
            palFreeMemory(pMac->hHdd, pMsg);
        }
    }

    smsLog(pMac, LOGW, "OEM_DATA: exiting Function %s", __func__);

    return status;
}
eHalStatus csrTdlsProcessAddSta( tpAniSirGlobal pMac, tSmeCmd *cmd )
{
    tTdlsAddStaCmdInfo *tdlsAddStaCmdInfo = &cmd->u.tdlsCmd.u.tdlsAddStaCmdInfo ;
    tSirTdlsAddStaReq *tdlsAddStaReq = NULL ;
    tCsrRoamSession *pSession = CSR_GET_SESSION( pMac, cmd->sessionId );
    eHalStatus status = eHAL_STATUS_FAILURE;

    if (NULL == pSession->pConnectBssDesc)
    {
        smsLog( pMac, LOGE, FL("BSS description is not present") );
        return eHAL_STATUS_FAILURE;
    }

    status = palAllocateMemory( pMac->hHdd, (void **)&tdlsAddStaReq, 
            (sizeof(tSirTdlsAddStaReq) ) );

    if (!HAL_STATUS_SUCCESS( status ) )
    {
        smsLog( pMac, LOGE, FL("alloc failed") );
        VOS_ASSERT(0) ;
        return status ;
    }
    tdlsAddStaReq->sessionId = cmd->sessionId;
    tdlsAddStaReq->tdlsAddOper = tdlsAddStaCmdInfo->tdlsAddOper;
    //Using dialog as transactionId. This can be used to match response with request
    tdlsAddStaReq->transactionId = 0;

    palCopyMemory(pMac->hHdd, tdlsAddStaReq->bssid,
                  pSession->pConnectBssDesc->bssId, sizeof (tSirMacAddr));

    palCopyMemory(pMac->hHdd, tdlsAddStaReq->peerMac, 
            tdlsAddStaCmdInfo->peerMac, sizeof(tSirMacAddr)) ;

    tdlsAddStaReq->capability = tdlsAddStaCmdInfo->capability;
    tdlsAddStaReq->uapsd_queues = tdlsAddStaCmdInfo->uapsdQueues;
    tdlsAddStaReq->max_sp = tdlsAddStaCmdInfo->maxSp;

    palCopyMemory(pMac->hHdd, tdlsAddStaReq->extn_capability,
                              tdlsAddStaCmdInfo->extnCapability,
                              SIR_MAC_MAX_EXTN_CAP);
    tdlsAddStaReq->htcap_present = tdlsAddStaCmdInfo->htcap_present;
    palCopyMemory(pMac->hHdd, &tdlsAddStaReq->htCap,
                  &tdlsAddStaCmdInfo->HTCap, sizeof(tdlsAddStaCmdInfo->HTCap));
    tdlsAddStaReq->vhtcap_present = tdlsAddStaCmdInfo->vhtcap_present;
    palCopyMemory(pMac->hHdd, &tdlsAddStaReq->vhtCap,
                  &tdlsAddStaCmdInfo->VHTCap, sizeof(tdlsAddStaCmdInfo->VHTCap));
    tdlsAddStaReq->supported_rates_length = tdlsAddStaCmdInfo->supportedRatesLen;
    palCopyMemory(pMac->hHdd, &tdlsAddStaReq->supported_rates,
                  tdlsAddStaCmdInfo->supportedRates, tdlsAddStaCmdInfo->supportedRatesLen);

    // Send the request to PE.
    smsLog( pMac, LOGE, "sending TDLS Add Sta req to PE " );
    status = tdlsSendMessage(pMac, eWNI_SME_TDLS_ADD_STA_REQ, 
            (void *)tdlsAddStaReq , sizeof(tSirTdlsAddStaReq)) ;
    if(!HAL_STATUS_SUCCESS( status ) )
    {
        smsLog( pMac, LOGE, FL("Failed to send request to MAC"));
    }
    return status;
}
eHalStatus csrTdlsProcessSendMgmt( tpAniSirGlobal pMac, tSmeCmd *cmd )
{
    tTdlsSendMgmtCmdInfo *tdlsSendMgmtCmdInfo = &cmd->u.tdlsCmd.u.tdlsSendMgmtCmdInfo ;
    tSirTdlsSendMgmtReq *tdlsSendMgmtReq = NULL ;
    tCsrRoamSession *pSession = CSR_GET_SESSION( pMac, cmd->sessionId );
    eHalStatus status = eHAL_STATUS_FAILURE;

    if (NULL == pSession->pConnectBssDesc)
    {
        smsLog( pMac, LOGE, FL("BSS Description is not present") );
        return eHAL_STATUS_FAILURE;
    }

    status = palAllocateMemory( pMac->hHdd, (void **)&tdlsSendMgmtReq, 
            (sizeof(tSirTdlsSendMgmtReq) + tdlsSendMgmtCmdInfo->len ) );

    if (!HAL_STATUS_SUCCESS( status ) )
    {
        smsLog( pMac, LOGE, FL("alloc failed") );
        VOS_ASSERT(0) ;
        return status ;
    }
    tdlsSendMgmtReq->sessionId = cmd->sessionId;
    //Using dialog as transactionId. This can be used to match response with request
    tdlsSendMgmtReq->transactionId = tdlsSendMgmtCmdInfo->dialog;  
    tdlsSendMgmtReq->reqType =  tdlsSendMgmtCmdInfo->frameType ;
    tdlsSendMgmtReq->dialog =  tdlsSendMgmtCmdInfo->dialog ;
    tdlsSendMgmtReq->statusCode =  tdlsSendMgmtCmdInfo->statusCode ;
    tdlsSendMgmtReq->responder =  tdlsSendMgmtCmdInfo->responder;

    palCopyMemory(pMac->hHdd, tdlsSendMgmtReq->bssid,
                  pSession->pConnectBssDesc->bssId, sizeof (tSirMacAddr));

    palCopyMemory(pMac->hHdd, tdlsSendMgmtReq->peerMac, 
            tdlsSendMgmtCmdInfo->peerMac, sizeof(tSirMacAddr)) ;

    if(tdlsSendMgmtCmdInfo->len && tdlsSendMgmtCmdInfo->buf)
    {
        palCopyMemory(pMac->hHdd, tdlsSendMgmtReq->addIe, tdlsSendMgmtCmdInfo->buf,
                tdlsSendMgmtCmdInfo->len);

    }
    // Send the request to PE.
    smsLog( pMac, LOG1, "sending TDLS Mgmt Frame req to PE " );
    status = tdlsSendMessage(pMac, eWNI_SME_TDLS_SEND_MGMT_REQ, 
            (void *)tdlsSendMgmtReq , sizeof(tSirTdlsSendMgmtReq)+tdlsSendMgmtCmdInfo->len) ;
    if(!HAL_STATUS_SUCCESS( status ) )
    {
        smsLog( pMac, LOGE, FL("Failed to send request to MAC"));
    }
    if(tdlsSendMgmtCmdInfo->len && tdlsSendMgmtCmdInfo->buf)
    {
        //Done with the buf. Free it.
        vos_mem_free( tdlsSendMgmtCmdInfo->buf );
        tdlsSendMgmtCmdInfo->buf = NULL;
        tdlsSendMgmtCmdInfo->len = 0;
    }

    return status;
}
eHalStatus csrTdlsProcessDelSta( tpAniSirGlobal pMac, tSmeCmd *cmd )
{
    tTdlsDelStaCmdInfo *tdlsDelStaCmdInfo = &cmd->u.tdlsCmd.u.tdlsDelStaCmdInfo ;
    tSirTdlsDelStaReq *tdlsDelStaReq = NULL ;
    tCsrRoamSession *pSession = CSR_GET_SESSION( pMac, cmd->sessionId );
    eHalStatus status = eHAL_STATUS_FAILURE;

    if (NULL == pSession)
    {
        smsLog( pMac, LOGE, FL("pSession is NULL"));
        return eHAL_STATUS_FAILURE;
    }

    if (NULL == pSession->pConnectBssDesc)
    {
        smsLog( pMac, LOGE, FL("BSS description is not present") );
        return eHAL_STATUS_FAILURE;
    }

    tdlsDelStaReq = vos_mem_malloc(sizeof(tSirTdlsDelStaReq));
    if ( NULL == tdlsDelStaReq )
        status = eHAL_STATUS_FAILURE;
    else
        status = eHAL_STATUS_SUCCESS;


    if (!HAL_STATUS_SUCCESS( status ) )
    {
        smsLog( pMac, LOGE, FL("alloc failed") );
        VOS_ASSERT(0) ;
        return status ;
    }
    tdlsDelStaReq->sessionId = cmd->sessionId;
    //Using dialog as transactionId. This can be used to match response with request
    tdlsDelStaReq->transactionId = 0;

    vos_mem_copy( tdlsDelStaReq->bssid,
                  pSession->pConnectBssDesc->bssId, sizeof (tSirMacAddr));

    vos_mem_copy( tdlsDelStaReq->peerMac,
            tdlsDelStaCmdInfo->peerMac, sizeof(tSirMacAddr)) ;

    // Send the request to PE.
#ifdef WLAN_FEATURE_TDLS_DEBUG
    smsLog( pMac, LOGE,
#else
    smsLog( pMac, LOG1,
#endif
        "sending TDLS Del Sta "MAC_ADDRESS_STR" req to PE",
         MAC_ADDR_ARRAY(tdlsDelStaCmdInfo->peerMac));
    status = tdlsSendMessage(pMac, eWNI_SME_TDLS_DEL_STA_REQ, 
            (void *)tdlsDelStaReq , sizeof(tSirTdlsDelStaReq)) ;
    if(!HAL_STATUS_SUCCESS( status ) )
    {
        smsLog( pMac, LOGE, FL("Failed to send request to MAC"));
    }
    return status;
}
eHalStatus csrTdlsProcessDelSta( tpAniSirGlobal pMac, tSmeCmd *cmd )
{
    tTdlsDelStaCmdInfo *tdlsDelStaCmdInfo = &cmd->u.tdlsCmd.u.tdlsDelStaCmdInfo ;
    tSirTdlsDelStaReq *tdlsDelStaReq = NULL ;
    tCsrRoamSession *pSession = CSR_GET_SESSION( pMac, cmd->sessionId );
    eHalStatus status = eHAL_STATUS_FAILURE;

    if (NULL == pSession)
    {
        return eHAL_STATUS_FAILURE;
    }

    if (NULL == pSession->pConnectBssDesc)
    {
        smsLog( pMac, LOGE, FL("BSS description is not present") );
        return eHAL_STATUS_FAILURE;
    }

    status = palAllocateMemory( pMac->hHdd, (void **)&tdlsDelStaReq, 
            (sizeof(tSirTdlsDelStaReq) ) );

    if (!HAL_STATUS_SUCCESS( status ) )
    {
        smsLog( pMac, LOGE, FL("alloc failed") );
        VOS_ASSERT(0) ;
        return status ;
    }
    tdlsDelStaReq->sessionId = cmd->sessionId;
    //Using dialog as transactionId. This can be used to match response with request
    tdlsDelStaReq->transactionId = 0;

    palCopyMemory(pMac->hHdd, tdlsDelStaReq->bssid,
                  pSession->pConnectBssDesc->bssId, sizeof (tSirMacAddr));

    palCopyMemory(pMac->hHdd, tdlsDelStaReq->peerMac, 
            tdlsDelStaCmdInfo->peerMac, sizeof(tSirMacAddr)) ;

    // Send the request to PE.
#ifdef WLAN_FEATURE_TDLS_DEBUG
    smsLog( pMac, LOGE,
#else
    smsLog( pMac, LOG1,
#endif
        "sending TDLS Del Sta %02x:%02x:%02x:%02x:%02x:%02x req to PE",
        tdlsDelStaCmdInfo->peerMac[0], tdlsDelStaCmdInfo->peerMac[1], tdlsDelStaCmdInfo->peerMac[2],
        tdlsDelStaCmdInfo->peerMac[3], tdlsDelStaCmdInfo->peerMac[4], tdlsDelStaCmdInfo->peerMac[5]);
    status = tdlsSendMessage(pMac, eWNI_SME_TDLS_DEL_STA_REQ, 
            (void *)tdlsDelStaReq , sizeof(tSirTdlsDelStaReq)) ;
    if(!HAL_STATUS_SUCCESS( status ) )
    {
        smsLog( pMac, LOGE, FL("Failed to send request to MAC"));
    }
    return status;
}
/*
 * commands received from CSR
 */
eHalStatus csrTdlsProcessCmd(tpAniSirGlobal pMac, tSmeCmd *cmd)
{
    eSmeCommandType  cmdType = cmd->command ;
    tANI_BOOLEAN status = eANI_BOOLEAN_TRUE;
    switch(cmdType)
    {
        case eSmeCommandTdlsSendMgmt:
        {
            status = csrTdlsProcessSendMgmt( pMac, cmd );
            if(HAL_STATUS_SUCCESS( status ) )
            {
               status = eANI_BOOLEAN_FALSE ;
            }
        }
        break ;
        case eSmeCommandTdlsAddPeer:
        {
            status = csrTdlsProcessAddSta( pMac, cmd );
            if(HAL_STATUS_SUCCESS( status ) )
            {
               status = eANI_BOOLEAN_FALSE ;
            }
        }
        break;
        case eSmeCommandTdlsDelPeer:
        {
            status = csrTdlsProcessDelSta( pMac, cmd );
            if(HAL_STATUS_SUCCESS( status ) )
            {
               status = eANI_BOOLEAN_FALSE ;
            }
        }
        break;
        case eSmeCommandTdlsLinkEstablish:
        {
            status = csrTdlsProcessLinkEstablish( pMac, cmd );
            if(HAL_STATUS_SUCCESS( status ) )
            {
               status = eANI_BOOLEAN_FALSE ;
            }
        }
        break;
       default:
       {
            /* TODO: Add default handling */
           break ;
       }

    }
    return status ;
}
/* ---------------------------------------------------------------------------
    \fn oemData_ProcessOemDataReqCommand
    \brief This function is called by the smeProcessCommand when the case hits
           eSmeCommandOemDataReq
    \return eHalStatus
  -------------------------------------------------------------------------------*/
eHalStatus oemData_ProcessOemDataReqCommand(tpAniSirGlobal pMac, tSmeCmd *pOemDataReqCmd)
{
    eHalStatus status = eHAL_STATUS_SUCCESS;

    //check if the system is in proper mode of operation for
    //oem data req/rsp to be functional. Currently, concurrency is not
    //supported and the driver must be operational only as
    //STA for oem data req/rsp to be functional. We return an invalid
    //mode flag if it is operational as any one of the following
    //in any of the active sessions
    //1. AP Mode
    //2. IBSS Mode
    //3. BTAMP Mode ...

    if(eHAL_STATUS_SUCCESS == oemData_IsOemDataReqAllowed(pMac))
    {
        smsLog(pMac, LOG1, "%s: OEM_DATA REQ allowed in the current mode", __func__);
        pMac->oemData.oemDataReqActive = eANI_BOOLEAN_TRUE;
        status = oemData_SendMBOemDataReq(pMac, &(pOemDataReqCmd->u.oemDataCmd.oemDataReq));
    }
    else
    {
        smsLog(pMac, LOG1, "%s: OEM_DATA REQ not allowed in the current mode", __func__);
        status = eHAL_STATUS_FAILURE;
    }

    if(!HAL_STATUS_SUCCESS(status))
    {
        smsLog(pMac, LOG1, "%s: OEM_DATA Failure, Release command", __func__);
        oemData_ReleaseOemDataReqCommand(pMac, pOemDataReqCmd, eOEM_DATA_REQ_INVALID_MODE);
        pMac->oemData.oemDataReqActive = eANI_BOOLEAN_FALSE;
    }

    return status;
}
/* ---------------------------------------------------------------------------
    \fn oemData_SendMBOemDataReq
    \brief Request an OEM DATA REQ to be passed down to PE
    \param pMac:
    \param pOemDataReq: Pointer to the oem data request
    \return eHalStatus
  -------------------------------------------------------------------------------*/
eHalStatus oemData_SendMBOemDataReq(tpAniSirGlobal pMac, tOemDataReq *pOemDataReq)
{
    eHalStatus status = eHAL_STATUS_SUCCESS;
    tSirOemDataReq* pMsg;
    tANI_U16 msgLen;
    tCsrRoamSession *pSession = CSR_GET_SESSION( pMac, pOemDataReq->sessionId );

    smsLog(pMac, LOGW, "OEM_DATA: entering Function %s", __func__);

    msgLen = (tANI_U16)(sizeof(tSirOemDataReq));

    pMsg = vos_mem_malloc(msgLen);
    if ( NULL == pMsg )
       status = eHAL_STATUS_FAILURE;
    else
       status = eHAL_STATUS_SUCCESS;
    if(HAL_STATUS_SUCCESS(status))
    {
        vos_mem_set(pMsg, msgLen, 0);
        pMsg->messageType = pal_cpu_to_be16((tANI_U16)eWNI_SME_OEM_DATA_REQ);
        pMsg->messageLen = pal_cpu_to_be16(msgLen);
        vos_mem_copy(pMsg->selfMacAddr, pSession->selfMacAddr, sizeof(tSirMacAddr) );
        vos_mem_copy(pMsg->oemDataReq, pOemDataReq->oemDataReq, OEM_DATA_REQ_SIZE);
        smsLog(pMac, LOGW, "OEM_DATA: sending message to pe%s", __func__);
        status = palSendMBMessage(pMac->hHdd, pMsg);
    }

    smsLog(pMac, LOGW, "OEM_DATA: exiting Function %s", __func__);

    return status;
}
static eHalStatus tdlsSaveTdlsPeerInfo(tpAniSirGlobal pMac, 
                                          tSirTdlsPeerInfo *disPeerInfo)
{
    tCsrTdlsPeerLinkinfo *peerInfo = NULL ; 
    tCsrTdlsCtxStruct *disInfo = &pMac->tdlsCtx ;
    eHalStatus status = eHAL_STATUS_FAILURE ;
    status = palAllocateMemory( pMac->hHdd, (void **)&peerInfo, 
                                sizeof(tCsrTdlsPeerLinkinfo));

 
    if (HAL_STATUS_SUCCESS(status))
    {
        palZeroMemory(pMac->hHdd, &peerInfo->tdlsDisPeerInfo, 
                                            sizeof(tSirTdlsPeerInfo));
        palCopyMemory(pMac->hHdd, &peerInfo->tdlsDisPeerInfo, disPeerInfo, 
                                             sizeof(tSirTdlsPeerInfo));

        disInfo->tdlsPeerCount++ ;

        csrLLInsertTail( &disInfo->tdlsPotentialPeerList, 
                                 &peerInfo->tdlsPeerStaLink, LL_ACCESS_LOCK );
    }

    return status ;

}
/*
 * TDLS request API, called from HDD to send a TDLS frame 
 * in SME/CSR and send message to PE to trigger TDLS discovery procedure.
 */
eHalStatus csrTdlsSendMgmtReq(tHalHandle hHal, tANI_U8 sessionId, tCsrTdlsSendMgmt *tdlsSendMgmt)
{
    tpAniSirGlobal pMac = PMAC_STRUCT( hHal );
    tSmeCmd *tdlsSendMgmtCmd ;
    eHalStatus status = eHAL_STATUS_FAILURE ;

    //If connected and in Infra. Only then allow this
    if( CSR_IS_SESSION_VALID( pMac, sessionId ) && 
        csrIsConnStateConnectedInfra( pMac, sessionId ) &&
        (NULL != tdlsSendMgmt) )
    {
        tdlsSendMgmtCmd = csrGetCommandBuffer(pMac) ;

        if(tdlsSendMgmtCmd)
        {
            tTdlsSendMgmtCmdInfo *tdlsSendMgmtCmdInfo = 
                            &tdlsSendMgmtCmd->u.tdlsCmd.u.tdlsSendMgmtCmdInfo ;

            tdlsSendMgmtCmd->sessionId = sessionId;

            tdlsSendMgmtCmdInfo->frameType = tdlsSendMgmt->frameType ;   
            tdlsSendMgmtCmdInfo->dialog = tdlsSendMgmt->dialog ;   
            tdlsSendMgmtCmdInfo->statusCode = tdlsSendMgmt->statusCode ;
            tdlsSendMgmtCmdInfo->responder = tdlsSendMgmt->responder;
            tdlsSendMgmtCmdInfo->peerCapability = tdlsSendMgmt->peerCapability;
            vos_mem_copy(tdlsSendMgmtCmdInfo->peerMac,
                                   tdlsSendMgmt->peerMac, sizeof(tSirMacAddr)) ; 

            if( (0 != tdlsSendMgmt->len) && (NULL != tdlsSendMgmt->buf) )
            {
                tdlsSendMgmtCmdInfo->buf = vos_mem_malloc(tdlsSendMgmt->len);
                if ( NULL == tdlsSendMgmtCmdInfo->buf )
                    status = eHAL_STATUS_FAILURE;
                else
                    status = eHAL_STATUS_SUCCESS;
                if(!HAL_STATUS_SUCCESS( status ) )
                {
                    smsLog( pMac, LOGE, FL("Alloc Failed") );
                    VOS_ASSERT(0) ;
                    return status ;
                }
                vos_mem_copy(tdlsSendMgmtCmdInfo->buf,
                        tdlsSendMgmt->buf, tdlsSendMgmt->len );
                tdlsSendMgmtCmdInfo->len = tdlsSendMgmt->len;
            }
            else
            {
                tdlsSendMgmtCmdInfo->buf = NULL;
                tdlsSendMgmtCmdInfo->len = 0;
            }

            tdlsSendMgmtCmd->command = eSmeCommandTdlsSendMgmt ;
            tdlsSendMgmtCmd->u.tdlsCmd.size = sizeof(tTdlsSendMgmtCmdInfo) ;
            smePushCommand(pMac, tdlsSendMgmtCmd, FALSE) ;
            status = eHAL_STATUS_SUCCESS ;
        }
    }

    return status ;
}
Exemple #11
0
/*--------------------------------------------------------------------------
 *
 * SME now sends the RIC IEs up to the supplicant.
 * The supplicant will then proceed to send down the
 * Reassoc Req.
 *
 *------------------------------------------------------------------------*/
void sme_GetRICIEs( tHalHandle hHal, tANI_U8 *ric_ies, tANI_U32 ric_ies_ip_len,
                    tANI_U32 *ric_ies_length )
{
    tpAniSirGlobal pMac = PMAC_STRUCT( hHal );
    eHalStatus status = eHAL_STATUS_FAILURE;

    *ric_ies_length = 0;

    status = sme_AcquireGlobalLock( &pMac->sme );
    if (!( HAL_STATUS_SUCCESS( status ))) 
       return;

    /* All or nothing */
    if (pMac->ft.ftSmeContext.psavedFTPreAuthRsp->ric_ies_length > 
        ric_ies_ip_len)
    {
       sme_ReleaseGlobalLock( &pMac->sme );
       return;
    }

    vos_mem_copy(ric_ies, pMac->ft.ftSmeContext.psavedFTPreAuthRsp->ric_ies, 
                 pMac->ft.ftSmeContext.psavedFTPreAuthRsp->ric_ies_length);

    *ric_ies_length = pMac->ft.ftSmeContext.psavedFTPreAuthRsp->ric_ies_length;

#ifdef WLAN_FEATURE_VOWIFI_11R_DEBUG
    smsLog( pMac, LOGE, FL(" Filled ric ies = %d\n"), *ric_ies_length);
#endif

    sme_ReleaseGlobalLock( &pMac->sme );
    return;
}
eHalStatus csrTdlsProcessLinkEstablish( tpAniSirGlobal pMac, tSmeCmd *cmd )
{
    tTdlsLinkEstablishCmdInfo *tdlsLinkEstablishCmdInfo = &cmd->u.tdlsCmd.u.tdlsLinkEstablishCmdInfo ;
    tSirTdlsLinkEstablishReq *tdlsLinkEstablishReq = NULL ;
    eHalStatus status = eHAL_STATUS_FAILURE;
    tCsrRoamSession *pSession = CSR_GET_SESSION( pMac, cmd->sessionId );

    if (NULL == pSession)
    {
        smsLog( pMac, LOGE, FL("pSession is NULL"));
        return eHAL_STATUS_FAILURE;
    }

    status = palAllocateMemory( pMac->hHdd, (void **)&tdlsLinkEstablishReq,
            (sizeof(tSirTdlsLinkEstablishReq) ) );

    if (!HAL_STATUS_SUCCESS( status ) )
    {
        smsLog( pMac, LOGE, FL("alloc failed \n") );
        VOS_ASSERT(0) ;
        return status ;
    }
    tdlsLinkEstablishReq->sessionId = cmd->sessionId;
    
    tdlsLinkEstablishReq->transactionId = 0;
    palCopyMemory(pMac->hHdd, tdlsLinkEstablishReq->peerMac,
                  tdlsLinkEstablishCmdInfo->peerMac, sizeof(tSirMacAddr));
    palCopyMemory(pMac->hHdd, tdlsLinkEstablishReq->bssid, pSession->pConnectBssDesc->bssId,
                  sizeof (tSirMacAddr));
    tdlsLinkEstablishReq->isBufSta = tdlsLinkEstablishCmdInfo->isBufSta;
    tdlsLinkEstablishReq->isResponder= tdlsLinkEstablishCmdInfo->isResponder;
    tdlsLinkEstablishReq->uapsdQueues= tdlsLinkEstablishCmdInfo->uapsdQueues;
    tdlsLinkEstablishReq->maxSp= tdlsLinkEstablishCmdInfo->maxSp;


    
    smsLog( pMac, LOGE, "sending TDLS Link Establish Request to PE \n" );
    status = tdlsSendMessage(pMac, eWNI_SME_TDLS_LINK_ESTABLISH_REQ,
                             (void *)tdlsLinkEstablishReq,
                             sizeof(tSirTdlsLinkEstablishReq));
    if (!HAL_STATUS_SUCCESS( status ) )
    {
        smsLog( pMac, LOGE, FL("Failed to send request to MAC\n"));
    }
    return status;
}
Exemple #13
0
eHalStatus csrTdlsProcessLinkEstablish( tpAniSirGlobal pMac, tSmeCmd *cmd )
{
    tTdlsLinkEstablishCmdInfo *tdlsLinkEstablishCmdInfo = &cmd->u.tdlsCmd.u.tdlsLinkEstablishCmdInfo ;
    tSirTdlsLinkEstablishReq *tdlsLinkEstablishReq = NULL ;
    eHalStatus status = eHAL_STATUS_FAILURE;
    tCsrRoamSession *pSession = CSR_GET_SESSION( pMac, cmd->sessionId );

    if (NULL == pSession)
    {
        smsLog( pMac, LOGE, FL("pSession is NULL"));
        return eHAL_STATUS_FAILURE;
    }

    tdlsLinkEstablishReq = vos_mem_malloc(sizeof(tSirTdlsLinkEstablishReq));

    if (tdlsLinkEstablishReq == NULL)
    {
        smsLog( pMac, LOGE, FL("alloc failed \n") );
        VOS_ASSERT(0) ;
        return status ;
    }
    tdlsLinkEstablishReq->sessionId = cmd->sessionId;
    //Using dialog as transactionId. This can be used to match response with request
    tdlsLinkEstablishReq->transactionId = 0;
    vos_mem_copy(tdlsLinkEstablishReq->peerMac,
                  tdlsLinkEstablishCmdInfo->peerMac, sizeof(tSirMacAddr));
    vos_mem_copy(tdlsLinkEstablishReq->bssid, pSession->pConnectBssDesc->bssId,
                  sizeof (tSirMacAddr));
    vos_mem_copy(tdlsLinkEstablishReq->supportedChannels,
                  tdlsLinkEstablishCmdInfo->supportedChannels,
                  tdlsLinkEstablishCmdInfo->supportedChannelsLen);
    tdlsLinkEstablishReq->supportedChannelsLen =
                      tdlsLinkEstablishCmdInfo->supportedChannelsLen;
    vos_mem_copy(tdlsLinkEstablishReq->supportedOperClasses,
                  tdlsLinkEstablishCmdInfo->supportedOperClasses,
                  tdlsLinkEstablishCmdInfo->supportedOperClassesLen);
    tdlsLinkEstablishReq->supportedOperClassesLen =
                      tdlsLinkEstablishCmdInfo->supportedOperClassesLen;
    tdlsLinkEstablishReq->isBufSta = tdlsLinkEstablishCmdInfo->isBufSta;
    tdlsLinkEstablishReq->isResponder= tdlsLinkEstablishCmdInfo->isResponder;
    tdlsLinkEstablishReq->uapsdQueues= tdlsLinkEstablishCmdInfo->uapsdQueues;
    tdlsLinkEstablishReq->maxSp= tdlsLinkEstablishCmdInfo->maxSp;
    tdlsLinkEstablishReq->isOffChannelSupported =
        tdlsLinkEstablishCmdInfo->isOffChannelSupported;

    // Send the request to PE.
    smsLog( pMac, LOGE, "sending TDLS Link Establish Request to PE \n" );
    status = tdlsSendMessage(pMac, eWNI_SME_TDLS_LINK_ESTABLISH_REQ,
                             (void *)tdlsLinkEstablishReq,
                             sizeof(tSirTdlsLinkEstablishReq));
    if (!HAL_STATUS_SUCCESS( status ) )
    {
        smsLog( pMac, LOGE, FL("Failed to send request to MAC\n"));
    }
    return status;
}
eHalStatus sme_p2pOpen( tHalHandle hHal )
{
   tpAniSirGlobal pMac = PMAC_STRUCT(hHal);
   eHalStatus status = eHAL_STATUS_SUCCESS;

   //If static structure is too big, Need to change this function to allocate memory dynamically
   vos_mem_zero(&pMac->p2pContext, sizeof( tp2pContext ));

   if(!HAL_STATUS_SUCCESS(status))
   {
      sme_p2pClose(hHal);
    }

   return status;
}
Exemple #15
0
/*--------------------------------------------------------------------------
 *
 * HDD Interface to SME. SME now sends the Auth 2 and RIC IEs up to the supplicant.
 * The supplicant will then proceed to send down the
 * Reassoc Req.
 *
 *------------------------------------------------------------------------*/
void sme_GetFTPreAuthResponse( tHalHandle hHal, tANI_U32 sessionId, tANI_U8 *ft_ies,
                               tANI_U32 ft_ies_ip_len, tANI_U16 *ft_ies_length )
{
   tpAniSirGlobal pMac = PMAC_STRUCT( hHal );
   tCsrRoamSession *pSession = CSR_GET_SESSION( pMac, sessionId );
   eHalStatus status = eHAL_STATUS_FAILURE;

   if (!pSession)
   {
      smsLog( pMac, LOGE, FL("pSession is NULL"));
      return;
   }

   *ft_ies_length = 0;

   status = sme_AcquireGlobalLock( &pMac->sme );
   if (!( HAL_STATUS_SUCCESS( status )))
      return;

   /* All or nothing - proceed only if both BSSID and FT IE fit */
   if((ANI_MAC_ADDR_SIZE +
     pSession->ftSmeContext.psavedFTPreAuthRsp->ft_ies_length) > ft_ies_ip_len)
   {
      sme_ReleaseGlobalLock( &pMac->sme );
      return;
   }

   // hdd needs to pack the bssid also along with the
   // auth response to supplicant
   vos_mem_copy(ft_ies, pSession->ftSmeContext.preAuthbssId, ANI_MAC_ADDR_SIZE);

   // Copy the auth resp FTIEs
   vos_mem_copy(&(ft_ies[ANI_MAC_ADDR_SIZE]),
         pSession->ftSmeContext.psavedFTPreAuthRsp->ft_ies,
         pSession->ftSmeContext.psavedFTPreAuthRsp->ft_ies_length);

   *ft_ies_length = ANI_MAC_ADDR_SIZE +
      pSession->ftSmeContext.psavedFTPreAuthRsp->ft_ies_length;

   pSession->ftSmeContext.FTState = eFT_REASSOC_REQ_WAIT;

#ifdef WLAN_FEATURE_VOWIFI_11R_DEBUG
   smsLog( pMac, LOG1, FL(" Filled auth resp = %d"), *ft_ies_length);
#endif
   sme_ReleaseGlobalLock( &pMac->sme );
   return;
}
Exemple #16
0
tSirRetStatus macStart(tHalHandle hHal, void* pHalMacStartParams)
{
   tSirRetStatus status = eSIR_SUCCESS;
   tpAniSirGlobal pMac = (tpAniSirGlobal) hHal;

   if (NULL == pMac)
   {
      VOS_ASSERT(0);
      status = eSIR_FAILURE;
      return status;
   }

   pMac->gDriverType = ((tHalMacStartParameters*)pHalMacStartParams)->driverType;

   sysLog(pMac, LOG2, FL("called\n"));

   do
   {

#if defined(TRACE_RECORD)
      //Enable Tracing
      macTraceInit(pMac);
#endif

      if (!HAL_STATUS_SUCCESS(palAllocateMemory(pMac->hHdd, ((void *)&pMac->pResetMsg), sizeof(tSirMbMsg))))
      {
         sysLog(pMac, LOGE, FL("pMac->pResetMsg is NULL\n"));
         status = eSIR_FAILURE;
         break;
      }
      else
      {
         palZeroMemory(pMac->hHdd, pMac->pResetMsg, sizeof(tSirMbMsg));
      }

      if (pMac->gDriverType != eDRIVER_TYPE_MFG)
      {
         status = peStart(pMac);
      }

   } while(0);
   pMac->sys.abort = false;

   return status;
}
/*
 * save TDLS peer info, this will be called after successfull completion
 * of TDLS discovery procedure.
 */
static eHalStatus tdlsSaveTdlsPeerInfo(tpAniSirGlobal pMac, 
                                          tSirTdlsPeerInfo *disPeerInfo)
{
    tCsrTdlsPeerLinkinfo *peerInfo = NULL ; 
    tCsrTdlsCtxStruct *disInfo = &pMac->tdlsCtx ;
    eHalStatus status = eHAL_STATUS_FAILURE ;
    /* 
     * Ok, allocate memory for peer info here
     * we allocate memory for each peer here and free his memory
     * at the time the peer node is getting deleted, possible case is 
     * teardown
     */
    peerInfo = vos_mem_malloc(sizeof(tCsrTdlsPeerLinkinfo));
    if ( NULL = peerInfo )
        status = eHAL_STATUS_FAILURE;
    else
        status = eHAL_STATUS_SUCCESS;

    /* 
     * go ahead and copy peerInfo and insert this node info discovery rsp
     * database.
     */ 
    if (HAL_STATUS_SUCCESS(status))
    {
        vos_mem_set( &peerInfo->tdlsDisPeerInfo,
                                            sizeof(tSirTdlsPeerInfo), 0);
        vos_mem_copy( &peerInfo->tdlsDisPeerInfo, disPeerInfo,
                                             sizeof(tSirTdlsPeerInfo));

        /*
         * update TDLS client count to indicate there is tdls client
         * in tdls potential peer list.
         */
        disInfo->tdlsPeerCount++ ;

        /*
         * finally insert this tdls peer info into tdls potential peer list
         */
        csrLLInsertTail( &disInfo->tdlsPotentialPeerList, 
                                 &peerInfo->tdlsPeerStaLink, LL_ACCESS_LOCK );
    }

    return status ;

}
Exemple #18
0
eHalStatus oemData_OemDataReqOpen(tHalHandle hHal)
{
    eHalStatus status = eHAL_STATUS_SUCCESS;
    tpAniSirGlobal pMac = PMAC_STRUCT(hHal);

    do
    {
        //initialize all the variables to null
        vos_mem_set(&(pMac->oemData), sizeof(tOemDataStruct), 0);
        if(!HAL_STATUS_SUCCESS(status))
        {
            smsLog(pMac, LOGE, "oemData_OemDataReqOpen: Cannot allocate memory for the timer function");
            break;
        }
    } while(0);

    return status;
}
static char *
dump_csr( tpAniSirGlobal pMac, tANI_U32 arg1, tANI_U32 arg2, tANI_U32 arg3, tANI_U32 arg4, char *p )
{
    static tCsrRoamProfile x;
    static tSirMacSSid ssid;   //To be allocated for array of SSIDs
    static tANI_U8 sessionId; // Defined for fixed session ID
    vos_mem_set((void*)&x, sizeof(x), 0);
    x.SSIDs.numOfSSIDs=1 ;
    x.SSIDs.SSIDList[0].SSID = ssid ;
    ssid.length=6 ;
    vos_mem_copy(ssid.ssId, "AniNet", 6);
    if(HAL_STATUS_SUCCESS(sme_AcquireGlobalLock( &pMac->sme )))
    {
        (void)csrRoamConnect(pMac, sessionId, &x, NULL, NULL);
        sme_ReleaseGlobalLock( &pMac->sme );
    }
    return p;
}
static char *dump_btcSetEvent( tpAniSirGlobal pMac, tANI_U32 arg1, 
                               tANI_U32 arg2, tANI_U32 arg3, tANI_U32 arg4, char *p )
{
    tSmeBtEvent btEvent;
    if( arg1 < BT_EVENT_TYPE_MAX )
    {
        smsLog(pMac, LOGE, FL(" signal BT event (%d) handle (%d) 3rd param(%d)"), arg1, arg2, arg3);
        vos_mem_zero(&btEvent, sizeof(tSmeBtEvent));
        btEvent.btEventType = arg1;
        switch( arg1 )
        {
        case BT_EVENT_SYNC_CONNECTION_COMPLETE:
        case BT_EVENT_SYNC_CONNECTION_UPDATED:
            btEvent.uEventParam.btSyncConnection.connectionHandle = (v_U16_t)arg2;
            btEvent.uEventParam.btSyncConnection.status = (v_U8_t)arg3;
            break;
        case BT_EVENT_DISCONNECTION_COMPLETE:
            btEvent.uEventParam.btDisconnect.connectionHandle = (v_U16_t)arg2;
            break;
        case BT_EVENT_CREATE_ACL_CONNECTION:
        case BT_EVENT_ACL_CONNECTION_COMPLETE:
            btEvent.uEventParam.btAclConnection.connectionHandle = (v_U16_t)arg2;
            btEvent.uEventParam.btAclConnection.status = (v_U8_t)arg3;
            break;
        case BT_EVENT_MODE_CHANGED:
            btEvent.uEventParam.btAclModeChange.connectionHandle = (v_U16_t)arg2;
            break;
        default:
            break;
        }
#ifndef WLAN_MDM_CODE_REDUCTION_OPT
        if(HAL_STATUS_SUCCESS(sme_AcquireGlobalLock( &pMac->sme )))
        {
            btcSignalBTEvent(pMac, &btEvent);
            sme_ReleaseGlobalLock( &pMac->sme );
        }
#endif
    }
    else
    {
        smsLog(pMac, LOGE, FL(" invalid event (%d)"), arg1);
    }
    return p;
}
Exemple #21
0
// tdlsoffchan
eHalStatus csrTdlsProcessChanSwitchReq( tpAniSirGlobal pMac, tSmeCmd *cmd )
{
    tTdlsChanSwitchCmdInfo *tdlsChanSwitchCmdInfo = &cmd->u.tdlsCmd.u.tdlsChanSwitchCmdInfo ;
    tSirTdlsChanSwitch *tdlsChanSwitch = NULL ;
    eHalStatus status = eHAL_STATUS_FAILURE;
    tCsrRoamSession *pSession = CSR_GET_SESSION( pMac, cmd->sessionId );

    if (NULL == pSession)
    {
        smsLog( pMac, LOGE, FL("pSession is NULL"));
        return eHAL_STATUS_FAILURE;
    }

    tdlsChanSwitch = vos_mem_malloc(sizeof(tSirTdlsChanSwitch));
    if (tdlsChanSwitch == NULL)
    {
        smsLog( pMac, LOGE, FL("alloc failed \n") );
        VOS_ASSERT(0) ;
        return status ;
    }
    tdlsChanSwitch->sessionId = cmd->sessionId;
    //Using dialog as transactionId. This can be used to match response with request
    tdlsChanSwitch->transactionId = 0;
    vos_mem_copy( tdlsChanSwitch->peerMac,
                  tdlsChanSwitchCmdInfo->peerMac, sizeof(tSirMacAddr));
    vos_mem_copy(tdlsChanSwitch->bssid, pSession->pConnectBssDesc->bssId,
                 sizeof (tSirMacAddr));

    tdlsChanSwitch->tdlsOffCh = tdlsChanSwitchCmdInfo->tdlsOffCh;
    tdlsChanSwitch->tdlsOffChBwOffset = tdlsChanSwitchCmdInfo->tdlsOffChBwOffset;
    tdlsChanSwitch->tdlsSwMode = tdlsChanSwitchCmdInfo->tdlsSwMode;

    // Send the request to PE.
    smsLog( pMac, LOGE, "sending TDLS Channel Switch to PE \n" );
    status = tdlsSendMessage(pMac, eWNI_SME_TDLS_CHANNEL_SWITCH_REQ,
                             (void *)tdlsChanSwitch,
                             sizeof(tSirTdlsChanSwitch));
    if (!HAL_STATUS_SUCCESS( status ) )
    {
        smsLog( pMac, LOGE, FL("Failed to send request to MAC\n"));
    }
    return status;
}
Exemple #22
0
eHalStatus sme_FTUpdateKey( tHalHandle hHal, tCsrRoamSetKey * pFTKeyInfo )
{
    tpAniSirGlobal pMac = PMAC_STRUCT( hHal );
    eHalStatus status = eHAL_STATUS_FAILURE;

    status = sme_AcquireGlobalLock( &pMac->sme );
    if (!( HAL_STATUS_SUCCESS( status )))
    {
       return eHAL_STATUS_FAILURE;
    }

    if (pFTKeyInfo == NULL) 
    {
        smsLog( pMac, LOGE, "%s: pFTKeyInfo is NULL\n", __FUNCTION__);
        sme_ReleaseGlobalLock( &pMac->sme );
        return eHAL_STATUS_FAILURE; 
    }

#if defined WLAN_FEATURE_VOWIFI_11R_DEBUG
    smsLog( pMac, LOGE, "sme_FTUpdateKey is received in state %d\n", 
        pMac->ft.ftSmeContext.FTState);
#endif

    // Global Station FT State
    switch(pMac->ft.ftSmeContext.FTState)
    {
    case eFT_SET_KEY_WAIT:
       status = sme_FTSendUpdateKeyInd( hHal, pFTKeyInfo );
       pMac->ft.ftSmeContext.FTState = eFT_START_READY;
       break;
          
    default:
       smsLog( pMac, LOGE, "%s: Unhandled state=%d\n", __FUNCTION__,
               pMac->ft.ftSmeContext.FTState);
       status = eHAL_STATUS_FAILURE;
       break;
    }
    sme_ReleaseGlobalLock( &pMac->sme );

    return status;
}
Exemple #23
0
eHalStatus oemData_OemDataReqClose(tHalHandle hHal)
{
    eHalStatus status = eHAL_STATUS_SUCCESS;
    tpAniSirGlobal pMac = PMAC_STRUCT(hHal);

    do
    {
        if(!HAL_STATUS_SUCCESS(status))
        {
            smsLog(pMac, LOGE, "oemData_OemDataReqClose: Failed in oemData_OemDataReqClose at StopTimers");
            break;
        }

        if(pMac->oemData.pOemDataRsp != NULL)
        {
            vos_mem_free(pMac->oemData.pOemDataRsp);
        }
        
        //initialize all the variables to null
        vos_mem_set(&(pMac->oemData), sizeof(tOemDataStruct), 0);
    } while(0);

    return eHAL_STATUS_SUCCESS;
}
Exemple #24
0
/* ---------------------------------------------------------------------------
    \fn sme_HandleOemDataRsp
    \brief This function processes the oem data response obtained from the PE
    \param pMsg - Pointer to the pSirOemDataRsp
    \return eHalStatus     
  -------------------------------------------------------------------------------*/
eHalStatus sme_HandleOemDataRsp(tHalHandle hHal, tANI_U8* pMsg)
{
    eHalStatus                         status = eHAL_STATUS_SUCCESS;
    tpAniSirGlobal                     pMac;
    tListElem                          *pEntry = NULL;
    tSmeCmd                            *pCommand = NULL;
    tSirOemDataRsp*                    pOemDataRsp = NULL;
    pMac = PMAC_STRUCT(hHal);

    smsLog(pMac, LOG1, "%s: OEM_DATA Entering", __func__);

    do
    {
        if(pMsg == NULL)
        {
            smsLog(pMac, LOGE, "in %s msg ptr is NULL", __func__);
            status = eHAL_STATUS_FAILURE;
            break;
        }
    
        pEntry = csrLLPeekHead( &pMac->sme.smeCmdActiveList, LL_ACCESS_LOCK );
        if(pEntry)
        {
            pCommand = GET_BASE_ADDR( pEntry, tSmeCmd, Link );
            if(eSmeCommandOemDataReq == pCommand->command)
            {
                pOemDataRsp = (tSirOemDataRsp*)pMsg;

                //make sure to acquire the lock before modifying the data
                status = sme_AcquireGlobalLock(&pMac->sme);
                if(!HAL_STATUS_SUCCESS(status))
                {
                    break;
                }

                if(pMac->oemData.pOemDataRsp != NULL)
                {
                    vos_mem_free(pMac->oemData.pOemDataRsp);
                }
                pMac->oemData.pOemDataRsp = (tOemDataRsp*)vos_mem_malloc(sizeof(tOemDataRsp));

                if(pMac->oemData.pOemDataRsp == NULL)
                {
                    sme_ReleaseGlobalLock(&pMac->sme);
                    smsLog(pMac, LOGE, "in %s vos_mem_malloc failed for pMac->oemData.pOemDataRsp", __func__);
                    status = eHAL_STATUS_FAILURE;
                    break;
                }

                smsLog(pMac, LOGE, "Before memory copy");
                vos_mem_copy((v_VOID_t*)(pMac->oemData.pOemDataRsp), (v_VOID_t*)(&pOemDataRsp->oemDataRsp), sizeof(tOemDataRsp));
                smsLog(pMac, LOGE, "after memory copy");
                sme_ReleaseGlobalLock(&pMac->sme);
            }
            else
            {
                smsLog(pMac, LOGE, "in %s eWNI_SME_OEM_DATA_RSP Received but NO REQs are ACTIVE ...",
                    __func__);
                status = eHAL_STATUS_FAILURE;
                break;
            }
        }
        else
        {
            smsLog(pMac, LOGE, "in %s eWNI_SME_OEM_DATA_RSP Received but NO commands are ACTIVE ...", __func__);
            status = eHAL_STATUS_FAILURE;
            break;
        }

        oemData_ReleaseOemDataReqCommand(pMac, pCommand, eHAL_STATUS_SUCCESS);
        pMac->oemData.oemDataReqActive = eANI_BOOLEAN_FALSE;

    } while(0);

    return status;
}
Exemple #25
0
/* ---------------------------------------------------------------------------
    \fn oemData_OemDataReq
    \brief Request an OEM DATA RSP
    \param sessionId - Id of session to be used
    \param pOemDataReqID - pointer to an object to get back the request ID
    \param callback - a callback function that is called upon finish
    \param pContext - a pointer passed in for the callback
    \return eHalStatus     
  -------------------------------------------------------------------------------*/
eHalStatus oemData_OemDataReq(tHalHandle hHal, 
                                tANI_U8 sessionId,
                                tOemDataReqConfig *oemDataReqConfig, 
                                tANI_U32 *pOemDataReqID, 
                                oemData_OemDataReqCompleteCallback callback, 
                                void *pContext)
{
    eHalStatus status = eHAL_STATUS_SUCCESS;
    tpAniSirGlobal pMac = PMAC_STRUCT( hHal );
    tSmeCmd *pOemDataCmd = NULL;

    do 
    {
        if( !CSR_IS_SESSION_VALID( pMac, sessionId ) )
        {
           status = eHAL_STATUS_FAILURE;
           break;
        }

        pMac->oemData.oemDataReqConfig.sessionId = sessionId;
        pMac->oemData.callback = callback;
        pMac->oemData.pContext = pContext;
        pMac->oemData.oemDataReqID = *(pOemDataReqID);
    
        vos_mem_copy((v_VOID_t*)(pMac->oemData.oemDataReqConfig.oemDataReq), (v_VOID_t*)(oemDataReqConfig->oemDataReq), OEM_DATA_REQ_SIZE);
    
        pMac->oemData.oemDataReqActive = eANI_BOOLEAN_FALSE;
    
        pOemDataCmd = smeGetCommandBuffer(pMac);
    
        //fill up the command before posting it.
        if(pOemDataCmd)
        {
            pOemDataCmd->command = eSmeCommandOemDataReq;
            pOemDataCmd->u.oemDataCmd.callback = callback;
            pOemDataCmd->u.oemDataCmd.pContext = pContext;
            pOemDataCmd->u.oemDataCmd.oemDataReqID = pMac->oemData.oemDataReqID;
    
            //set the oem data request
            pOemDataCmd->u.oemDataCmd.oemDataReq.sessionId = pMac->oemData.oemDataReqConfig.sessionId;
            vos_mem_copy((v_VOID_t*)(pOemDataCmd->u.oemDataCmd.oemDataReq.oemDataReq), 
                                    (v_VOID_t*)(pMac->oemData.oemDataReqConfig.oemDataReq), OEM_DATA_REQ_SIZE);
        }
        else
        {
            status = eHAL_STATUS_FAILURE;
            break;
        }
    
        //now queue this command in the sme command queue
        //Here since this is not interacting with the csr just push the command
        //into the sme queue. Also push this command with the normal priority
        smePushCommand(pMac, pOemDataCmd, eANI_BOOLEAN_FALSE);

    } while(0);

    if(!HAL_STATUS_SUCCESS(status) && pOemDataCmd)
    {
        oemData_ReleaseOemDataReqCommand(pMac, pOemDataCmd, eOEM_DATA_REQ_FAILURE);
        pMac->oemData.oemDataReqActive = eANI_BOOLEAN_FALSE;
    }

    return status;
}
/*----------------------------------------------------------------------------
 *
 * The function limSendRemainOnChannelDebugMarkerFrame, prepares Marker frame
 * for Start and End of remain on channel with RemainOnChannelMsg as Vendor
 * Specific information element of the frame.
 *
 *----------------------------------------------------------------------------*/
tSirRetStatus limSendRemainOnChannelDebugMarkerFrame(tpAniSirGlobal pMac,
                                                     tANI_U8 *remainOnChannelMsg)
{
    tSirMacAddr          magicMacAddr= {0x11, 0x22, 0x33, 0x44, 0x55, 0x66};
    tANI_U32             nBytes, nPayload;
    tSirRetStatus        nSirStatus;
    tANI_U8              *pFrame;
    void                 *pPacket;
    eHalStatus           halstatus;
    tANI_U8              txFlag = 0;
    publicVendorSpecific *pPublicVendorSpecific;

    pPublicVendorSpecific = vos_mem_malloc(sizeof(publicVendorSpecific));
    if( pPublicVendorSpecific == NULL )
    {
        limLog( pMac, LOGE,
                FL( "Unable to allocate memory for Vendor specific information"
                    " element" ) );
        return eSIR_MEM_ALLOC_FAILED;
    }
    // Assigning Action category code as unknown as this is debug marker frame
    pPublicVendorSpecific->category = REMAIN_ON_CHANNEL_UNKNOWN_ACTION_CATEGORY;
    pPublicVendorSpecific->elementid = VENDOR_SPECIFIC_ELEMENT_ID;
    pPublicVendorSpecific->length = strlen(remainOnChannelMsg);

    nPayload = sizeof(publicVendorSpecific) + pPublicVendorSpecific->length;

    nBytes = nPayload + sizeof( tSirMacMgmtHdr );

    halstatus = palPktAlloc( pMac->hHdd, HAL_TXRX_FRM_802_11_MGMT,
                             ( tANI_U16 )nBytes, ( void** ) &pFrame,
                             ( void** ) &pPacket );
    if ( ! HAL_STATUS_SUCCESS ( halstatus ) )
    {
        limLog( pMac, LOGE, FL("Failed to allocate %d bytes for a Remain"
                               " on channel action frame."), nBytes );
        nSirStatus = eSIR_MEM_ALLOC_FAILED;
        goto end;
    }
    vos_mem_zero( pFrame, nBytes );

    // Populate frame with MAC header
    nSirStatus = limPopulateMacHeader( pMac, pFrame, SIR_MAC_MGMT_FRAME,
                                SIR_MAC_MGMT_ACTION, magicMacAddr,
                                pMac->lim.gSelfMacAddr);
    if ( eSIR_SUCCESS != nSirStatus )
    {
        limLog( pMac, LOGE, FL("Failed to populate the buffer descriptor for a"
                               " Action frame for remain on channel.") );
        palPktFree( pMac->hHdd, HAL_TXRX_FRM_802_11_MGMT,
                    ( void* ) pFrame, ( void* ) pPacket );
        goto end;
    }

    // Copy Public Vendor specific fields to frame's information element
    vos_mem_copy( (pFrame + (sizeof( tSirMacMgmtHdr ))),
                   pPublicVendorSpecific, sizeof(publicVendorSpecific) );
    // Copy Remain On channel message to Vendor Specific information field
    vos_mem_copy( (pFrame + (nBytes - pPublicVendorSpecific->length)),
                   remainOnChannelMsg, pPublicVendorSpecific->length );

    halstatus = halTxFrame( pMac, pPacket,
                            ( tANI_U16 ) sizeof(tSirMacMgmtHdr) + nPayload,
                            HAL_TXRX_FRM_802_11_MGMT,
                            ANI_TXDIR_TODS,
                            7,//SMAC_SWBD_TX_TID_MGMT_HIGH,
                            limTxComplete, pFrame, txFlag );
    if ( ! HAL_STATUS_SUCCESS ( halstatus ) )
    {
        limLog( pMac, LOGE, FL("could not send marker frame for"
                               " remain on channel!" ));
        //Pkt will be freed up by the callback
        nSirStatus = eSIR_FAILURE;
        goto end;
    }

    nSirStatus = eSIR_SUCCESS;

end:
    vos_mem_free( pPublicVendorSpecific );
    return nSirStatus;
}
Exemple #27
0
eHalStatus sme_FTSendUpdateKeyInd(tHalHandle hHal, tCsrRoamSetKey * pFTKeyInfo)
{
    tSirFTUpdateKeyInfo *pMsg;
    tANI_U16 msgLen;
    eHalStatus status = eHAL_STATUS_FAILURE;
    tAniEdType tmpEdType;
    tAniKeyDirection tmpDirection;
    //tANI_U8 *pBuf;
    tANI_U8 *p = NULL;
    tAniEdType edType;
    tpAniSirGlobal pMac = PMAC_STRUCT( hHal );
    int i = 0;

    smsLog(pMac, LOGE, FL("keyLength %d\n"), pFTKeyInfo->keyLength);

      for(i=0; i<pFTKeyInfo->keyLength; i++)
          smsLog(pMac, LOGE, FL("%02x"), pFTKeyInfo->Key[i]); 

    msgLen  = sizeof( tANI_U16) + sizeof( tANI_U16 ) + 
       sizeof( pMsg->keyMaterial.length ) + sizeof( pMsg->keyMaterial.edType ) + 
       sizeof( pMsg->keyMaterial.numKeys ) + sizeof( pMsg->keyMaterial.key );
                     
    status = palAllocateMemory(pMac->hHdd, (void **)&pMsg, msgLen);
    if ( !HAL_STATUS_SUCCESS(status) )
    {
       return eHAL_STATUS_FAILURE;
    }

    palZeroMemory(pMac->hHdd, pMsg, msgLen);
    pMsg->messageType = pal_cpu_to_be16((tANI_U16)eWNI_SME_FT_UPDATE_KEY);
    pMsg->length = pal_cpu_to_be16(msgLen);

    p = (tANI_U8 *)&pMsg->keyMaterial;

    // Set the pMsg->keyMaterial.length field (this length is defined as all data that follows the edType field
    // in the tSirKeyMaterial keyMaterial; field).
    //
    // !!NOTE:  This keyMaterial.length contains the length of a MAX size key, though the keyLength can be 
    // shorter than this max size.  Is LIM interpreting this ok ?
    p = pal_set_U16( p, pal_cpu_to_be16((tANI_U16)( sizeof( pMsg->keyMaterial.numKeys ) + 
                                                    ( pMsg->keyMaterial.numKeys * sizeof( pMsg->keyMaterial.key ) ) )) );

    // set pMsg->keyMaterial.edType
    edType = csrTranslateEncryptTypeToEdType( pFTKeyInfo->encType );
    tmpEdType = pal_cpu_to_be32(edType);
    palCopyMemory( pMac->hHdd, p, (tANI_U8 *)&tmpEdType, sizeof(tAniEdType) );
    p += sizeof( pMsg->keyMaterial.edType );

    // set the pMsg->keyMaterial.numKeys field
    *p = pMsg->keyMaterial.numKeys;
    p += sizeof( pMsg->keyMaterial.numKeys );   

    // set pSirKey->keyId = keyId;
    *p = pMsg->keyMaterial.key[ 0 ].keyId;
    p += sizeof( pMsg->keyMaterial.key[ 0 ].keyId );

    // set pSirKey->unicast = (tANI_U8)fUnicast;
    *p = (tANI_U8)eANI_BOOLEAN_TRUE;
    p += sizeof( pMsg->keyMaterial.key[ 0 ].unicast );

    // set pSirKey->keyDirection = aniKeyDirection;
    tmpDirection = pal_cpu_to_be32(pFTKeyInfo->keyDirection);
    palCopyMemory( pMac->hHdd, p, (tANI_U8 *)&tmpDirection, sizeof(tAniKeyDirection) );
    p += sizeof(tAniKeyDirection);
    //    pSirKey->keyRsc = ;;
    palCopyMemory( pMac->hHdd, p, pFTKeyInfo->keyRsc, CSR_MAX_RSC_LEN );
    p += sizeof( pMsg->keyMaterial.key[ 0 ].keyRsc );

    // set pSirKey->paeRole
    *p = pFTKeyInfo->paeRole;   // 0 is Supplicant
    p++;

    // set pSirKey->keyLength = keyLength;
    p = pal_set_U16( p, pal_cpu_to_be16(pFTKeyInfo->keyLength) );

    if ( pFTKeyInfo->keyLength && pFTKeyInfo->Key ) 
    {   
        palCopyMemory( pMac->hHdd, p, pFTKeyInfo->Key, pFTKeyInfo->keyLength ); 
        if(pFTKeyInfo->keyLength == 16)
        {
            smsLog(pMac, LOGE, "  SME Set keyIdx (%d) encType(%d) key = %02X-%02X-%02X-%02X-%02X-%02X-%02X-%02X-%02X-%02X-%02X-%02X-%02X-%02X-%02X-%02X\n",
            pFTKeyInfo->keyId, edType, pFTKeyInfo->Key[0], pFTKeyInfo->Key[1], pFTKeyInfo->Key[2], pFTKeyInfo->Key[3], pFTKeyInfo->Key[4],
            pFTKeyInfo->Key[5], pFTKeyInfo->Key[6], pFTKeyInfo->Key[7], pFTKeyInfo->Key[8],
            pFTKeyInfo->Key[9], pFTKeyInfo->Key[10], pFTKeyInfo->Key[11], pFTKeyInfo->Key[12], pFTKeyInfo->Key[13], pFTKeyInfo->Key[14], pFTKeyInfo->Key[15]);
        }
    }

    status = palSendMBMessage(pMac->hHdd, pMsg);

    return( status );
}
Exemple #28
0
/*--------------------------------------------------------------------------
  Each time the supplicant sends down the FT IEs to the driver.
  This function is called in SME. This fucntion packages and sends
  the FT IEs to PE.
  ------------------------------------------------------------------------*/
void sme_SetFTIEs( tHalHandle hHal, tANI_U8 sessionId, tANI_U8 *ft_ies, 
        tANI_U16 ft_ies_length )
{
    tpAniSirGlobal pMac = PMAC_STRUCT( hHal );
    eHalStatus status = eHAL_STATUS_FAILURE;

    status = sme_AcquireGlobalLock( &pMac->sme );
    if (!( HAL_STATUS_SUCCESS( status ))) return;

    if (ft_ies == NULL) 
    {
        smsLog( pMac, LOGE, FL(" ft ies is NULL\n"));
        sme_ReleaseGlobalLock( &pMac->sme );
        return; 
    }

#if defined WLAN_FEATURE_VOWIFI_11R_DEBUG
    smsLog( pMac, LOGE, "FT IEs Req is received in state %d\n", 
        pMac->ft.ftSmeContext.FTState);
#endif

    // Global Station FT State
    switch(pMac->ft.ftSmeContext.FTState)
    {
        case eFT_START_READY:
        case eFT_AUTH_REQ_READY:
            if ((pMac->ft.ftSmeContext.auth_ft_ies) && 
                    (pMac->ft.ftSmeContext.auth_ft_ies_length))
            {
                // Free the one we received last from the supplicant
                vos_mem_free(pMac->ft.ftSmeContext.auth_ft_ies);
                pMac->ft.ftSmeContext.auth_ft_ies_length = 0; 
            }

            // Save the FT IEs
            pMac->ft.ftSmeContext.auth_ft_ies = vos_mem_malloc(ft_ies_length);
            if(pMac->ft.ftSmeContext.auth_ft_ies == NULL)
            {
               smsLog( pMac, LOGE, FL("Memory allocation failed for "
                                      "auth_ft_ies\n"));
               sme_ReleaseGlobalLock( &pMac->sme );
               return;
            }
            pMac->ft.ftSmeContext.auth_ft_ies_length = ft_ies_length;
            vos_mem_copy((tANI_U8 *)pMac->ft.ftSmeContext.auth_ft_ies, ft_ies,
                ft_ies_length);
                
            pMac->ft.ftSmeContext.FTState = eFT_AUTH_REQ_READY;

#if defined WLAN_FEATURE_VOWIFI_11R_DEBUG
            smsLog( pMac, LOGE, "ft_ies_length=%d\n", ft_ies_length);
            /*
            smsLog( pMac, LOGE, "%d: New Auth ft_ies_length=%02x%02x%02x\n", 
                current->pid, pMac->ft.ftSmeContext.auth_ft_ies[0],
                pMac->ft.ftSmeContext.auth_ft_ies[1],
                pMac->ft.ftSmeContext.auth_ft_ies[2]);
                */
#endif
            break;

        case eFT_AUTH_COMPLETE:
            // We will need to re-start preauth. If we received FT IEs in
            // eFT_PRE_AUTH_DONE state, it implies there was a rekey in 
            // our pre-auth state. Hence this implies we need Pre-auth again.

            // OK now inform SME we have no pre-auth list.
            // Delete the pre-auth node locally. Set your self back to restart pre-auth
            // TBD
#if defined WLAN_FEATURE_VOWIFI_11R_DEBUG
            smsLog( pMac, LOGE, 
                "Pre-auth done and now receiving---> AUTH REQ <---- in state %d\n", 
                pMac->ft.ftSmeContext.FTState);
            smsLog( pMac, LOGE, "Unhandled reception of FT IES in state %d\n", 
                pMac->ft.ftSmeContext.FTState);
#endif
            break;

        case eFT_REASSOC_REQ_WAIT:
            // We are done with pre-auth, hence now waiting for
            // reassoc req. This is the new FT Roaming in place

            // At this juncture we are ready to start sending Re-Assoc Req.
#if defined WLAN_FEATURE_VOWIFI_11R_DEBUG
            smsLog( pMac, LOGE, "New Reassoc Req=%p in state %d\n", 
                ft_ies, pMac->ft.ftSmeContext.FTState);
#endif
            if ((pMac->ft.ftSmeContext.reassoc_ft_ies) && 
                (pMac->ft.ftSmeContext.reassoc_ft_ies_length))
            {
                // Free the one we received last from the supplicant
                vos_mem_free(pMac->ft.ftSmeContext.reassoc_ft_ies);
                pMac->ft.ftSmeContext.reassoc_ft_ies_length = 0; 
            }

            // Save the FT IEs
            pMac->ft.ftSmeContext.reassoc_ft_ies = vos_mem_malloc(ft_ies_length);
            if(pMac->ft.ftSmeContext.reassoc_ft_ies == NULL)
            {
               smsLog( pMac, LOGE, FL("Memory allocation failed for "
                                      "reassoc_ft_ies\n"));
               sme_ReleaseGlobalLock( &pMac->sme );
               return;
            }
            pMac->ft.ftSmeContext.reassoc_ft_ies_length = ft_ies_length;
            vos_mem_copy((tANI_U8 *)pMac->ft.ftSmeContext.reassoc_ft_ies, ft_ies,
                ft_ies_length);
                
            pMac->ft.ftSmeContext.FTState = eFT_SET_KEY_WAIT;
#if defined WLAN_FEATURE_VOWIFI_11R_DEBUG
            smsLog( pMac, LOGE, "ft_ies_length=%d state=%d\n", ft_ies_length,
                pMac->ft.ftSmeContext.FTState);
            /*
            smsLog( pMac, LOGE, "%d: New Auth ft_ies_length=%02x%02x%02x\n", 
                current->pid, pMac->ft.ftSmeContext.reassoc_ft_ies[0],
                pMac->ft.ftSmeContext.reassoc_ft_ies[1],
                pMac->ft.ftSmeContext.reassoc_ft_ies[2]);
                */
#endif
            
            break;

        default:
            smsLog( pMac, LOGE, FL(" Unhandled state=%d\n"),
                pMac->ft.ftSmeContext.FTState);
            break;
    }
    sme_ReleaseGlobalLock( &pMac->sme );
}
Exemple #29
0
/* Application Specific include files */
#include "halInternal.h"
#include "halHddApis.h"
#include "halDebug.h"
#include "halMTU.h"
#include "halRxp.h"
#include "halPhyApi.h"

//#ifdef ANI_OS_TYPE_LINUX
#include "halCommonApi.h"   // halCleanup
#endif
#include "cfgApi.h"         // cfgCleanup
#include "limApi.h"         // limCleanup
#include "sirTypes.h"
#include "sysDebug.h"
#include "sysEntryFunc.h"
#include "macInitApi.h"
#if defined(ANI_LOGDUMP)
#include "logDump.h"
#endif //#if defined(ANI_LOGDUMP)

#ifdef TRACE_RECORD
#include "macTrace.h"
#endif

extern tSirRetStatus halDoCfgInit(tpAniSirGlobal pMac);
extern tSirRetStatus halProcessStartEvent(tpAniSirGlobal pMac);




tSirRetStatus macReset(tpAniSirGlobal pMac, tANI_U32 rc);

#ifdef FEATURE_WLAN_INTEGRATED_SOC
tSirRetStatus macPreStart(tHalHandle hHal)
{
   tSirRetStatus status = eSIR_SUCCESS;
   tANI_BOOLEAN memAllocFailed = eANI_BOOLEAN_FALSE;
   tpAniSirGlobal pMac = (tpAniSirGlobal) hHal;
   tANI_U8 i;

   for(i=0; i<MAX_DUMP_TABLE_ENTRY; i++)
   {
      if(palAllocateMemory(pMac->hHdd, ((void *)&pMac->dumpTableEntry[i]), sizeof(tDumpModuleEntry))
          != eHAL_STATUS_SUCCESS)
      {
         memAllocFailed = eANI_BOOLEAN_TRUE;
         break;
      }
      else
      {
         palZeroMemory(pMac->hHdd, pMac->dumpTableEntry[i], sizeof(tSirMbMsg));
      }
   }
   if( memAllocFailed )
   {
      while(i>0)
      {
         i--;
         palFreeMemory(pMac, pMac->dumpTableEntry[i]);
      }
      sysLog(pMac, LOGE, FL("pMac->dumpTableEntry is NULL\n"));
      status = eSIR_FAILURE;
   }

#if defined(ANI_LOGDUMP)
   //logDumpInit must be called before any module starts
   logDumpInit(pMac);
#endif //#if defined(ANI_LOGDUMP)

   return status;
}

tSirRetStatus macStart(tHalHandle hHal, void* pHalMacStartParams)
{
   tSirRetStatus status = eSIR_SUCCESS;
   tpAniSirGlobal pMac = (tpAniSirGlobal) hHal;

   if (NULL == pMac)
   {
      VOS_ASSERT(0);
      status = eSIR_FAILURE;
      return status;
   }

   pMac->gDriverType = ((tHalMacStartParameters*)pHalMacStartParams)->driverType;

   sysLog(pMac, LOG2, FL("called\n"));

   do
   {

#if defined(TRACE_RECORD)
      //Enable Tracing
      macTraceInit(pMac);
#endif

      if (!HAL_STATUS_SUCCESS(palAllocateMemory(pMac->hHdd, ((void *)&pMac->pResetMsg), sizeof(tSirMbMsg))))
      {
         sysLog(pMac, LOGE, FL("pMac->pResetMsg is NULL\n"));
         status = eSIR_FAILURE;
         break;
      }
      else
      {
         palZeroMemory(pMac->hHdd, pMac->pResetMsg, sizeof(tSirMbMsg));
      }

      if (pMac->gDriverType != eDRIVER_TYPE_MFG)
      {
         status = peStart(pMac);
      }

   } while(0);
   pMac->sys.abort = false;

   return status;
}

#else /* FEATURE_WLAN_INTEGRATED_SOC */
tSirRetStatus macStart(tHalHandle hHal, void* pHalMacStartParams)
{
    tANI_U8 i;
    tSirRetStatus status = eSIR_SUCCESS;
    eHalStatus             halStatus;
    tpAniSirGlobal pMac = (tpAniSirGlobal) hHal;
    tANI_BOOLEAN memAllocFailed = eANI_BOOLEAN_FALSE;

    if(NULL == pMac)
    {
        VOS_ASSERT(0);
        status = eSIR_FAILURE;
        return status;
    }

    pMac->gDriverType = ((tHalMacStartParameters *)pHalMacStartParams)->driverType;

    sysLog(pMac, LOG2, FL("called\n"));

    do
    {
        for(i=0; i<MAX_DUMP_TABLE_ENTRY; i++)
        {
            if(palAllocateMemory(pMac->hHdd, ((void **)&pMac->dumpTableEntry[i]), sizeof(tDumpModuleEntry))
                != eHAL_STATUS_SUCCESS)
            {
                memAllocFailed = eANI_BOOLEAN_TRUE;
                break;
            }
            else
            {
                palZeroMemory(pMac->hHdd, pMac->dumpTableEntry[i], sizeof(tSirMbMsg));
            }
        }
        if( memAllocFailed )
        {
            while(i>0)
            {
                i--;
                palFreeMemory(pMac, pMac->dumpTableEntry[i]);
            }
            sysLog(pMac, LOGE, FL("pMac->dumpTableEntry is NULL\n"));
            status = eSIR_FAILURE;
            break;
        }
        else
        {
#if defined(ANI_LOGDUMP)
            logDumpInit(pMac);
#endif //#if defined(ANI_LOGDUMP)
        }

#if defined(TRACE_RECORD)
        //Enable Tracing
        macTraceInit(pMac);
#endif
        if (!HAL_STATUS_SUCCESS(palAllocateMemory(pMac->hHdd, ((void **)&pMac->pResetMsg), sizeof(tSirMbMsg))))
        {
            sysLog(pMac, LOGE, FL("pMac->pResetMsg is NULL\n"));
            status = eSIR_FAILURE;
            break;
        }
        else
        {
            palZeroMemory(pMac->hHdd, pMac->pResetMsg, sizeof(tSirMbMsg));
        }

        halStatus = halStart(hHal, (tHalMacStartParameters*)pHalMacStartParams );

        if ( !HAL_STATUS_SUCCESS(halStatus) )
        {
            sysLog(pMac,LOGE, FL("halStart failed with error code = %d\n"), halStatus);
            status = eSIR_FAILURE;
        }
        else if(pMac->gDriverType != eDRIVER_TYPE_MFG)
        {
            peStart(pMac);
        }

    }while(0);
    pMac->sys.abort = false;

    return status;
}
eHalStatus sme_FTUpdateKey( tHalHandle hHal, tCsrRoamSetKey * pFTKeyInfo )
{
    tpAniSirGlobal pMac = PMAC_STRUCT( hHal );
    eHalStatus status = eHAL_STATUS_FAILURE;

    status = sme_AcquireGlobalLock( &pMac->sme );
    if (!( HAL_STATUS_SUCCESS( status )))
    {
       return eHAL_STATUS_FAILURE;
    }

    if (pFTKeyInfo == NULL)
    {
        smsLog( pMac, LOGE, "%s: pFTKeyInfo is NULL", __func__);
        sme_ReleaseGlobalLock( &pMac->sme );
        return eHAL_STATUS_FAILURE;
    }

#if defined WLAN_FEATURE_VOWIFI_11R_DEBUG
    smsLog( pMac, LOG1, "sme_FTUpdateKey is received in state %d",
        pMac->ft.ftSmeContext.FTState);
#endif

    // Global Station FT State
    switch(pMac->ft.ftSmeContext.FTState)
    {
    case eFT_SET_KEY_WAIT:
#ifdef DEBUG_ROAM_DELAY
    //store the PTK send event
    vos_record_roam_event(e_HDD_SET_PTK_REQ, NULL, 0);
#endif
    if (sme_GetFTPreAuthState (hHal) == TRUE)
      {
          status = sme_FTSendUpdateKeyInd(pMac, pFTKeyInfo);
          if (status != 0 )
          {
              smsLog( pMac, LOGE, "%s: Key set failure %d", __func__,
                      status);
              pMac->ft.ftSmeContext.setFTPTKState = FALSE;
              status = eHAL_STATUS_FT_PREAUTH_KEY_FAILED;
          }
          else
          {
              pMac->ft.ftSmeContext.setFTPTKState = TRUE;
              status = eHAL_STATUS_FT_PREAUTH_KEY_SUCCESS;
              smsLog( pMac, LOG1, "%s: Key set success", __func__);
          }
          sme_SetFTPreAuthState(hHal, FALSE);
      }
      pMac->ft.ftSmeContext.FTState = eFT_START_READY;
#ifdef WLAN_FEATURE_VOWIFI_11R_DEBUG
      smsLog( pMac, LOG1, "%s: state changed to %d status %d", __func__,
              pMac->ft.ftSmeContext.FTState, status);
#endif
       break;
          
    default:
       smsLog( pMac, LOGE, "%s: Unhandled state=%d", __func__,
               pMac->ft.ftSmeContext.FTState);
       status = eHAL_STATUS_FAILURE;
       break;
    }
    sme_ReleaseGlobalLock( &pMac->sme );

    return status;
}