/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
* enumerated by the host and is now ready to be used by the application.
*/
void EVENT_USB_Host_DeviceEnumerationComplete(void) {
uint16_t ConfigDescriptorSize;
uint8_t ConfigDescriptorData[512];
if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData, sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful) {
KeyHost.status(STAT_ERROR);
KeyHost.error(ERROR_CFGDESC);
return;
}
if (HID_Host_ConfigurePipes(&Keyboard_HID_Interface, ConfigDescriptorSize, ConfigDescriptorData) != HID_ENUMERROR_NoError) {
KeyHost.status(STAT_ERROR);
KeyHost.error(ERROR_DEV);
return;
}
if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful) {
KeyHost.status(STAT_ERROR);
KeyHost.error(ERROR_SETCFG);
return;
}
if (HID_Host_SetBootProtocol(&Keyboard_HID_Interface) != 0) {
KeyHost.status(STAT_ERROR);
KeyHost.error(ERROR_SETPROTO);
USB_Host_SetDeviceConfiguration(0);
return;
}
// KeyHost.status(STAT_CONNECTED);
}
/* This indicates that a device has been successfully
enumerated by the host and is now ready to be used by the
application. */
void EVENT_USB_Host_DeviceEnumerationComplete(const uint8_t corenum)
{
uint16_t ConfigDescriptorSize;
uint8_t ConfigDescriptorData[512];
if (USB_Host_GetDeviceConfigDescriptor(corenum, 1, &ConfigDescriptorSize, ConfigDescriptorData,
sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful) {
DEBUGOUT("Error Retrieving Configuration Descriptor.\r\n");
return;
}
Keyboard_HID_Interface.Config.PortNumber = corenum;
if (HID_Host_ConfigurePipes(&Keyboard_HID_Interface,
ConfigDescriptorSize, ConfigDescriptorData) != HID_ENUMERROR_NoError) {
DEBUGOUT("Attached Device Not a Valid Keyboard.\r\n");
return;
}
if (USB_Host_SetDeviceConfiguration(Keyboard_HID_Interface.Config.PortNumber, 1) != HOST_SENDCONTROL_Successful) {
DEBUGOUT("Error Setting Device Configuration.\r\n");
return;
}
if (HID_Host_SetBootProtocol(&Keyboard_HID_Interface) != 0) {
DEBUGOUT("Could not Set Boot Protocol Mode.\r\n");
USB_Host_SetDeviceConfiguration(Keyboard_HID_Interface.Config.PortNumber, 0);
return;
}
DEBUGOUT("Keyboard Enumerated.\r\n");
}
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
* enumerated by the host and is now ready to be used by the application.
*/
void EVENT_USB_Host_DeviceEnumerationComplete(void)
{
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
uint16_t ConfigDescriptorSize;
uint8_t ConfigDescriptorData[512];
if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
{
puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
return;
}
if (HID_Host_ConfigurePipes(&Keyboard_HID_Interface,
ConfigDescriptorSize, ConfigDescriptorData) != HID_ENUMERROR_NoError)
{
puts_P(PSTR("Attached Device Not a Valid Keyboard.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
return;
}
if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Error Setting Device Configuration.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
return;
}
if (HID_Host_SetBootProtocol(&Keyboard_HID_Interface) != 0)
{
puts_P(PSTR("Could not Set Boot Protocol Mode.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_Host_SetDeviceConfiguration(0);
return;
}
puts_P(PSTR("Keyboard Enumerated.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
/** Main program entry point. This routine configures the hardware required by the application, then
* enters a loop to run the application tasks in sequence.
*/
int main(void)
{
SetupHardware();
puts_P(PSTR(ESC_FG_CYAN "Keyboard Host Demo running.\r\n" ESC_FG_WHITE));
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
sei();
for (;;)
{
switch (USB_HostState)
{
case HOST_STATE_Addressed:
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
uint16_t ConfigDescriptorSize;
uint8_t ConfigDescriptorData[512];
if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
{
puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
if (HID_Host_ConfigurePipes(&Keyboard_HID_Interface,
ConfigDescriptorSize, ConfigDescriptorData) != HID_ENUMERROR_NoError)
{
puts_P(PSTR("Attached Device Not a Valid Keyboard.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Error Setting Device Configuration.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
if (HID_Host_SetBootProtocol(&Keyboard_HID_Interface) != 0)
{
puts_P(PSTR("Could not Set Boot Protocol Mode.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
puts_P(PSTR("Keyboard Enumerated.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_READY);
USB_HostState = HOST_STATE_Configured;
break;
case HOST_STATE_Configured:
if (HID_Host_IsReportReceived(&Keyboard_HID_Interface))
{
USB_KeyboardReport_Data_t KeyboardReport;
HID_Host_ReceiveReport(&Keyboard_HID_Interface, &KeyboardReport);
LEDs_ChangeLEDs(LEDS_LED1, (KeyboardReport.Modifier) ? LEDS_LED1 : 0);
uint8_t KeyCode = KeyboardReport.KeyCode[0];
if (KeyCode)
{
char PressedKey = 0;
LEDs_ToggleLEDs(LEDS_LED2);
/* Retrieve pressed key character if alphanumeric */
if ((KeyCode >= HID_KEYBOARD_SC_A) && (KeyCode <= HID_KEYBOARD_SC_Z))
{
PressedKey = (KeyCode - HID_KEYBOARD_SC_A) + 'A';
}
else if ((KeyCode >= HID_KEYBOARD_SC_1_AND_EXCLAMATION) &
(KeyCode <= HID_KEYBOARD_SC_0_AND_CLOSING_PARENTHESIS))
{
PressedKey = (KeyCode - HID_KEYBOARD_SC_1_AND_EXCLAMATION) + '0';
}
else if (KeyCode == HID_KEYBOARD_SC_SPACE)
{
PressedKey = ' ';
}
else if (KeyCode == HID_KEYBOARD_SC_ENTER)
{
PressedKey = '\n';
}
if (PressedKey)
putchar(PressedKey);
}
}
break;
}
HID_Host_USBTask(&Keyboard_HID_Interface);
USB_USBTask();
}
}
/** Host state machine task. This task handles the enumeration and control of USB Mice while in USB Host mode,
* setting up the appropriate data pipes and processing reports from the attached device.
*/
void MouseHostTask(void)
{
switch (USB_HostState)
{
case HOST_STATE_Addressed:
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
uint16_t ConfigDescriptorSize;
uint8_t ConfigDescriptorData[512];
if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
{
printf("Error Retrieving Configuration Descriptor.\r\n");
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
if (HID_Host_ConfigurePipes(&Mouse_HID_Host_Interface,
ConfigDescriptorSize, ConfigDescriptorData) != HID_ENUMERROR_NoError)
{
printf("Attached Device Not a Valid Mouse.\r\n");
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
{
printf("Error Setting Device Configuration.\r\n");
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
if (HID_Host_SetBootProtocol(&Mouse_HID_Host_Interface) != 0)
{
printf("Could not Set Boot Protocol Mode.\r\n");
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
printf("Mouse Enumerated.\r\n");
USB_HostState = HOST_STATE_Configured;
break;
case HOST_STATE_Configured:
if (HID_Host_IsReportReceived(&Mouse_HID_Host_Interface))
{
uint8_t LEDMask = LEDS_NO_LEDS;
USB_MouseReport_Data_t MouseReport;
HID_Host_ReceiveReport(&Mouse_HID_Host_Interface, &MouseReport);
printf_P(PSTR("dX:%2d dY:%2d Button:%d\r\n"), MouseReport.X,
MouseReport.Y,
MouseReport.Button);
if (MouseReport.X > 0)
LEDMask |= LEDS_LED1;
else if (MouseReport.X < 0)
LEDMask |= LEDS_LED2;
if (MouseReport.Y > 0)
LEDMask |= LEDS_LED3;
else if (MouseReport.Y < 0)
LEDMask |= LEDS_LED4;
if (MouseReport.Button)
LEDMask = LEDS_ALL_LEDS;
LEDs_SetAllLEDs(LEDMask);
}
break;
}
}
