Exemple #1
0
void
hypre_F90_IFACE(hypre_amssettol, HYPRE_AMSSETTOL)
   ( hypre_F90_Obj *solver,
     hypre_F90_Real *tol,
     hypre_F90_Int *ierr)
{
   *ierr = (hypre_F90_Int)
      ( HYPRE_AMSSetTol(
           hypre_F90_PassObj (HYPRE_Solver, solver),
           hypre_F90_PassReal (tol) ) );
}
Exemple #2
0
int main (int argc, char *argv[])
{
   int myid, num_procs;
   int n, N, pi, pj, pk;
   double h;

   double tol, theta;
   int maxit, cycle_type;
   int rlx_type, rlx_sweeps, rlx_weight, rlx_omega;
   int amg_coarsen_type, amg_agg_levels, amg_rlx_type;
   int amg_interp_type, amg_Pmax;
   int singular_problem ;

   HYPRE_Int time_index;

   HYPRE_SStructGrid     edge_grid;
   HYPRE_SStructGraph    A_graph;
   HYPRE_SStructMatrix   A;
   HYPRE_SStructVector   b;
   HYPRE_SStructVector   x;
   HYPRE_SStructGrid     node_grid;
   HYPRE_SStructGraph    G_graph;
   HYPRE_SStructStencil  G_stencil[3];
   HYPRE_SStructMatrix   G;
   HYPRE_SStructVector   xcoord, ycoord, zcoord;

   HYPRE_Solver          solver, precond;

   /* Initialize MPI */
   MPI_Init(&argc, &argv);
   MPI_Comm_rank(MPI_COMM_WORLD, &myid);
   MPI_Comm_size(MPI_COMM_WORLD, &num_procs);

   /* Set default parameters */
   n                = 10;
   optionAlpha      = 0;
   optionBeta       = 0;
   maxit            = 100;
   tol              = 1e-6;
   cycle_type       = 13;
   rlx_type         = 2;
   rlx_sweeps       = 1;
   rlx_weight       = 1.0;
   rlx_omega        = 1.0;
   amg_coarsen_type = 10;
   amg_agg_levels   = 1;
   amg_rlx_type     = 6;
   theta            = 0.25;
   amg_interp_type  = 6;
   amg_Pmax         = 4;
   singular_problem = 0;

   /* Parse command line */
   {
      int arg_index = 0;
      int print_usage = 0;

      while (arg_index < argc)
      {
         if ( strcmp(argv[arg_index], "-n") == 0 )
         {
            arg_index++;
            n = atoi(argv[arg_index++]);
         }
         else if ( strcmp(argv[arg_index], "-a") == 0 )
         {
            arg_index++;
            optionAlpha = atoi(argv[arg_index++]);
         }
         else if ( strcmp(argv[arg_index], "-b") == 0 )
         {
            arg_index++;
            optionBeta = atoi(argv[arg_index++]);
         }
         else if ( strcmp(argv[arg_index], "-maxit") == 0 )
         {
            arg_index++;
            maxit = atoi(argv[arg_index++]);
         }
         else if ( strcmp(argv[arg_index], "-tol") == 0 )
         {
            arg_index++;
            tol = atof(argv[arg_index++]);
         }
         else if ( strcmp(argv[arg_index], "-type") == 0 )
         {
            arg_index++;
            cycle_type = atoi(argv[arg_index++]);
         }
         else if ( strcmp(argv[arg_index], "-rlx") == 0 )
         {
            arg_index++;
            rlx_type = atoi(argv[arg_index++]);
         }
         else if ( strcmp(argv[arg_index], "-rlxn") == 0 )
         {
            arg_index++;
            rlx_sweeps = atoi(argv[arg_index++]);
         }
         else if ( strcmp(argv[arg_index], "-rlxw") == 0 )
         {
            arg_index++;
            rlx_weight = atof(argv[arg_index++]);
         }
         else if ( strcmp(argv[arg_index], "-rlxo") == 0 )
         {
            arg_index++;
            rlx_omega = atof(argv[arg_index++]);
         }
         else if ( strcmp(argv[arg_index], "-ctype") == 0 )
         {
            arg_index++;
            amg_coarsen_type = atoi(argv[arg_index++]);
         }
         else if ( strcmp(argv[arg_index], "-amgrlx") == 0 )
         {
            arg_index++;
            amg_rlx_type = atoi(argv[arg_index++]);
         }
         else if ( strcmp(argv[arg_index], "-agg") == 0 )
         {
            arg_index++;
            amg_agg_levels = atoi(argv[arg_index++]);
         }
         else if ( strcmp(argv[arg_index], "-itype") == 0 )
         {
            arg_index++;
            amg_interp_type = atoi(argv[arg_index++]);
         }
         else if ( strcmp(argv[arg_index], "-pmax") == 0 )
         {
            arg_index++;
            amg_Pmax = atoi(argv[arg_index++]);
         }
         else if ( strcmp(argv[arg_index], "-sing") == 0 )
         {
            arg_index++;
            singular_problem = 1;
         }
         else if ( strcmp(argv[arg_index], "-theta") == 0 )
         {
            arg_index++;
            theta = atof(argv[arg_index++]);
         }

         else if ( strcmp(argv[arg_index], "-help") == 0 )
         {
            print_usage = 1;
            break;
         }
         else
         {
            arg_index++;
         }
      }

      if ((print_usage) && (myid == 0))
      {
         printf("\n");
         printf("Usage: %s [<options>]\n", argv[0]);
         printf("\n");
         printf("  -n <n>              : problem size per processor (default: 10)\n");
         printf("  -a <alpha_opt>      : choice for the curl-curl coefficient (default: 1)\n");
         printf("  -b <beta_opt>       : choice for the mass coefficient (default: 1)\n");
         printf("\n");
         printf("PCG-AMS solver options:                                     \n");
         printf("  -maxit <num>        : maximum number of iterations (100)  \n");
         printf("  -tol <num>          : convergence tolerance (1e-6)        \n");
         printf("  -type <num>         : 3-level cycle type (0-8, 11-14)     \n");
         printf("  -theta <num>        : BoomerAMG threshold (0.25)          \n");
         printf("  -ctype <num>        : BoomerAMG coarsening type           \n");
         printf("  -agg <num>          : Levels of BoomerAMG agg. coarsening \n");
         printf("  -amgrlx <num>       : BoomerAMG relaxation type           \n");
         printf("  -itype <num>        : BoomerAMG interpolation type        \n");
         printf("  -pmax <num>         : BoomerAMG interpolation truncation  \n");
         printf("  -rlx <num>          : relaxation type                     \n");
         printf("  -rlxn <num>         : number of relaxation sweeps         \n");
         printf("  -rlxw <num>         : damping parameter (usually <=1)     \n");
         printf("  -rlxo <num>         : SOR parameter (usually in (0,2))    \n");
         printf("  -sing               : curl-curl only (singular) problem   \n");
         printf("\n");
         printf("\n");
      }

      if (print_usage)
      {
         MPI_Finalize();
         return (0);
      }
   }

   /* Figure out the processor grid (N x N x N).  The local problem size is n^3,
      while pi, pj and pk indicate the position in the processor grid. */
   N  = pow(num_procs,1.0/3.0) + 0.5;
   if (num_procs != N*N*N)
   {
      if (myid == 0) printf("Can't run on %d processors, try %d.\n",
                            num_procs, N*N*N);
      MPI_Finalize();
      exit(1);
   }
   h  = 1.0 / (N*n);
   pk = myid / (N*N);
   pj = myid/N - pk*N;
   pi = myid - pj*N - pk*N*N;

   /* Start timing */
   time_index = hypre_InitializeTiming("SStruct Setup");
   hypre_BeginTiming(time_index);

   /* 1. Set up the edge and nodal grids.  Note that we do this simultaneously
         to make sure that they have the same extents.  For simplicity we use
         only one part to represent the unit cube. */
   {
      HYPRE_Int ndim = 3;
      HYPRE_Int nparts = 1;

      /* Create empty 2D grid objects */
      HYPRE_SStructGridCreate(MPI_COMM_WORLD, ndim, nparts, &node_grid);
      HYPRE_SStructGridCreate(MPI_COMM_WORLD, ndim, nparts, &edge_grid);

      /* Set the extents of the grid - each processor sets its grid boxes. */
      {
         HYPRE_Int part = 0;
         HYPRE_Int ilower[3] = {1 + pi*n, 1 + pj*n, 1 + pk*n};
         HYPRE_Int iupper[3] = {n + pi*n, n + pj*n, n + pk*n};

         HYPRE_SStructGridSetExtents(node_grid, part, ilower, iupper);
         HYPRE_SStructGridSetExtents(edge_grid, part, ilower, iupper);
      }

      /* Set the variable type and number of variables on each grid. */
      {
         HYPRE_Int i;
         HYPRE_Int nnodevars = 1;
         HYPRE_Int nedgevars = 3;

         HYPRE_SStructVariable nodevars[1] = {HYPRE_SSTRUCT_VARIABLE_NODE};
         HYPRE_SStructVariable edgevars[3] = {HYPRE_SSTRUCT_VARIABLE_XEDGE,
                                              HYPRE_SSTRUCT_VARIABLE_YEDGE,
                                              HYPRE_SSTRUCT_VARIABLE_ZEDGE};
         for (i = 0; i < nparts; i++)
         {
            HYPRE_SStructGridSetVariables(node_grid, i, nnodevars, nodevars);
            HYPRE_SStructGridSetVariables(edge_grid, i, nedgevars, edgevars);
         }
      }

      /* Since there is only one part, there is no need to call the
         SetNeighborPart or SetSharedPart functions, which determine the spatial
         relation between the parts.  See Examples 12, 13 and 14 for
         illustrations of these calls. */

      /* Now the grids are ready to be used */
      HYPRE_SStructGridAssemble(node_grid);
      HYPRE_SStructGridAssemble(edge_grid);
   }

   /* 2. Create the finite element stiffness matrix A and load vector b. */
   {
      HYPRE_Int part = 0; /* this problem has only one part */

      /* Set the ordering of the variables in the finite element problem.  This
         is done by listing the variable offset directions relative to the
         element's center.  See the Reference Manual for more details. */
      {
         HYPRE_Int ordering[48] = { 0,  0, -1, -1,    /* x-edge [0]-[1] */
                                    1, +1,  0, -1,    /* y-edge [1]-[2] */
         /*     [7]------[6]  */    0,  0, +1, -1,    /* x-edge [3]-[2] */
         /*     /|       /|   */    1, -1,  0, -1,    /* y-edge [0]-[3] */
         /*    / |      / |   */    0,  0, -1, +1,    /* x-edge [4]-[5] */
         /*  [4]------[5] |   */    1, +1,  0, +1,    /* y-edge [5]-[6] */
         /*   | [3]----|-[2]  */    0,  0, +1, +1,    /* x-edge [7]-[6] */
         /*   | /      | /    */    1, -1,  0, +1,    /* y-edge [4]-[7] */
         /*   |/       |/     */    2, -1, -1,  0,    /* z-edge [0]-[4] */
         /*  [0]------[1]     */    2, +1, -1,  0,    /* z-edge [1]-[5] */
                                    2, +1, +1,  0,    /* z-edge [2]-[6] */
                                    2, -1, +1,  0 };  /* z-edge [3]-[7] */

         HYPRE_SStructGridSetFEMOrdering(edge_grid, part, ordering);
      }

      /* Set up the Graph - this determines the non-zero structure of the
         matrix. */
      {
         HYPRE_Int part = 0;

         /* Create the graph object */
         HYPRE_SStructGraphCreate(MPI_COMM_WORLD, edge_grid, &A_graph);

         /* See MatrixSetObjectType below */
         HYPRE_SStructGraphSetObjectType(A_graph, HYPRE_PARCSR);

         /* Indicate that this problem uses finite element stiffness matrices and
            load vectors, instead of stencils. */
         HYPRE_SStructGraphSetFEM(A_graph, part);

         /* The edge finite element matrix is full, so there is no need to call the
            HYPRE_SStructGraphSetFEMSparsity() function. */

         /* Assemble the graph */
         HYPRE_SStructGraphAssemble(A_graph);
      }

      /* Set up the SStruct Matrix and right-hand side vector */
      {
         /* Create the matrix object */
         HYPRE_SStructMatrixCreate(MPI_COMM_WORLD, A_graph, &A);
         /* Use a ParCSR storage */
         HYPRE_SStructMatrixSetObjectType(A, HYPRE_PARCSR);
         /* Indicate that the matrix coefficients are ready to be set */
         HYPRE_SStructMatrixInitialize(A);

         /* Create an empty vector object */
         HYPRE_SStructVectorCreate(MPI_COMM_WORLD, edge_grid, &b);
         /* Use a ParCSR storage */
         HYPRE_SStructVectorSetObjectType(b, HYPRE_PARCSR);
         /* Indicate that the vector coefficients are ready to be set */
         HYPRE_SStructVectorInitialize(b);
      }

      /* Set the matrix and vector entries by finite element assembly */
      {
         /* local stiffness matrix and load vector */
         double S[12][12], F[12];

         int i, j, k;
         HYPRE_Int index[3];

         for (i = 1; i <= n; i++)
            for (j = 1; j <= n; j++)
               for (k = 1; k <= n; k++)
               {
                  /* Compute the FEM matrix and r.h.s. for cell (i,j,k) with
                     coefficients evaluated at the cell center. */
                  index[0] = i + pi*n; index[1] = j + pj*n; index[2] = k + pk*n;
                  ComputeFEMND1(S,F,(pi*n+i)*h-h/2,(pj*n+j)*h-h/2,(pk*n+k)*h-h/2,h);

                  /* Eliminate boundary conditions on x = 0 */
                  if (index[0] == 1)
                  {
                     int ii, jj, bc_edges[4] = { 3, 11, 7, 8 };
                     for (ii = 0; ii < 4; ii++)
                     {
                        for (jj = 0; jj < 12; jj++)
                           S[bc_edges[ii]][jj] = S[jj][bc_edges[ii]] = 0.0;
                        S[bc_edges[ii]][bc_edges[ii]] = 1.0;
                        F[bc_edges[ii]] = 0.0;
                     }
                  }
                  /* Eliminate boundary conditions on y = 0 */
                  if (index[1] == 1)
                  {
                     int ii, jj, bc_edges[4] = { 0, 9, 4, 8 };
                     for (ii = 0; ii < 4; ii++)
                     {
                        for (jj = 0; jj < 12; jj++)
                           S[bc_edges[ii]][jj] = S[jj][bc_edges[ii]] = 0.0;
                        S[bc_edges[ii]][bc_edges[ii]] = 1.0;
                        F[bc_edges[ii]] = 0.0;
                     }
                  }
                  /* Eliminate boundary conditions on z = 0 */
                  if (index[2] == 1)
                  {
                     int ii, jj, bc_edges[4] = { 0, 1, 2, 3 };
                     for (ii = 0; ii < 4; ii++)
                     {
                        for (jj = 0; jj < 12; jj++)
                           S[bc_edges[ii]][jj] = S[jj][bc_edges[ii]] = 0.0;
                        S[bc_edges[ii]][bc_edges[ii]] = 1.0;
                        F[bc_edges[ii]] = 0.0;
                     }
                  }
                  /* Eliminate boundary conditions on x = 1 */
                  if (index[0] == N*n)
                  {
                     int ii, jj, bc_edges[4] = { 1, 10, 5, 9 };
                     for (ii = 0; ii < 4; ii++)
                     {
                        for (jj = 0; jj < 12; jj++)
                           S[bc_edges[ii]][jj] = S[jj][bc_edges[ii]] = 0.0;
                        S[bc_edges[ii]][bc_edges[ii]] = 1.0;
                        F[bc_edges[ii]] = 0.0;
                     }
                  }
                  /* Eliminate boundary conditions on y = 1 */
                  if (index[1] == N*n)
                  {
                     int ii, jj, bc_edges[4] = { 2, 10, 6, 11 };
                     for (ii = 0; ii < 4; ii++)
                     {
                        for (jj = 0; jj < 12; jj++)
                           S[bc_edges[ii]][jj] = S[jj][bc_edges[ii]] = 0.0;
                        S[bc_edges[ii]][bc_edges[ii]] = 1.0;
                        F[bc_edges[ii]] = 0.0;
                     }
                  }
                  /* Eliminate boundary conditions on z = 1 */
                  if (index[2] == N*n)
                  {
                     int ii, jj, bc_edges[4] = { 4, 5, 6, 7 };
                     for (ii = 0; ii < 4; ii++)
                     {
                        for (jj = 0; jj < 12; jj++)
                           S[bc_edges[ii]][jj] = S[jj][bc_edges[ii]] = 0.0;
                        S[bc_edges[ii]][bc_edges[ii]] = 1.0;
                        F[bc_edges[ii]] = 0.0;
                     }
                  }

                  /* Assemble the matrix */
                  HYPRE_SStructMatrixAddFEMValues(A, part, index, &S[0][0]);

                  /* Assemble the vector */
                  HYPRE_SStructVectorAddFEMValues(b, part, index, F);
               }
      }

      /* Collective calls finalizing the matrix and vector assembly */
      HYPRE_SStructMatrixAssemble(A);
      HYPRE_SStructVectorAssemble(b);
   }

   /* 3. Create the discrete gradient matrix G, which is needed in AMS. */
   {
      HYPRE_Int part = 0;
      HYPRE_Int stencil_size = 2;

      /* Define the discretization stencil relating the edges and nodes of the
         grid. */
      {
         HYPRE_Int ndim = 3;
         HYPRE_Int entry;
         HYPRE_Int var = 0; /* the node variable */

         /* The discrete gradient stencils connect edge to node variables. */
         HYPRE_Int Gx_offsets[2][3] = {{-1,0,0},{0,0,0}};  /* x-edge [7]-[6] */
         HYPRE_Int Gy_offsets[2][3] = {{0,-1,0},{0,0,0}};  /* y-edge [5]-[6] */
         HYPRE_Int Gz_offsets[2][3] = {{0,0,-1},{0,0,0}};  /* z-edge [2]-[6] */

         HYPRE_SStructStencilCreate(ndim, stencil_size, &G_stencil[0]);
         HYPRE_SStructStencilCreate(ndim, stencil_size, &G_stencil[1]);
         HYPRE_SStructStencilCreate(ndim, stencil_size, &G_stencil[2]);

         for (entry = 0; entry < stencil_size; entry++)
         {
            HYPRE_SStructStencilSetEntry(G_stencil[0], entry, Gx_offsets[entry], var);
            HYPRE_SStructStencilSetEntry(G_stencil[1], entry, Gy_offsets[entry], var);
            HYPRE_SStructStencilSetEntry(G_stencil[2], entry, Gz_offsets[entry], var);
         }
      }

      /* Set up the Graph - this determines the non-zero structure of the
         matrix. */
      {
         HYPRE_Int nvars = 3;
         HYPRE_Int var; /* the edge variables */

         /* Create the discrete gradient graph object */
         HYPRE_SStructGraphCreate(MPI_COMM_WORLD, edge_grid, &G_graph);

         /* See MatrixSetObjectType below */
         HYPRE_SStructGraphSetObjectType(G_graph, HYPRE_PARCSR);

         /* Since the discrete gradient relates edge and nodal variables (it is a
            rectangular matrix), we have to specify the domain (column) grid. */
         HYPRE_SStructGraphSetDomainGrid(G_graph, node_grid);

         /* Tell the graph which stencil to use for each edge variable on each
            part (we only have one part). */
         for (var = 0; var < nvars; var++)
            HYPRE_SStructGraphSetStencil(G_graph, part, var, G_stencil[var]);

         /* Assemble the graph */
         HYPRE_SStructGraphAssemble(G_graph);
      }

      /* Set up the SStruct Matrix */
      {
         /* Create the matrix object */
         HYPRE_SStructMatrixCreate(MPI_COMM_WORLD, G_graph, &G);
         /* Use a ParCSR storage */
         HYPRE_SStructMatrixSetObjectType(G, HYPRE_PARCSR);
         /* Indicate that the matrix coefficients are ready to be set */
         HYPRE_SStructMatrixInitialize(G);
      }

      /* Set the discrete gradient values, assuming a "natural" orientation of
         the edges (i.e. one in agreement with the coordinate directions). */
      {
         int i;
         int nedges = n*(n+1)*(n+1);
         double *values;
         HYPRE_Int stencil_indices[2] = {0,1}; /* the nodes of each edge */

         values = calloc(2*nedges, sizeof(double));

         /* The edge orientation is fixed: from first to second node */
         for (i = 0; i < nedges; i++)
         {
            values[2*i]   = -1.0;
            values[2*i+1] =  1.0;
         }

         /* Set the values in the discrete gradient x-edges */
         {
            HYPRE_Int var = 0;
            HYPRE_Int ilower[3] = {1 + pi*n, 0 + pj*n, 0 + pk*n};
            HYPRE_Int iupper[3] = {n + pi*n, n + pj*n, n + pk*n};
            HYPRE_SStructMatrixSetBoxValues(G, part, ilower, iupper, var,
                                            stencil_size, stencil_indices,
                                            values);
         }
         /* Set the values in the discrete gradient y-edges */
         {
            HYPRE_Int var = 1;
            HYPRE_Int ilower[3] = {0 + pi*n, 1 + pj*n, 0 + pk*n};
            HYPRE_Int iupper[3] = {n + pi*n, n + pj*n, n + pk*n};
            HYPRE_SStructMatrixSetBoxValues(G, part, ilower, iupper, var,
                                            stencil_size, stencil_indices,
                                            values);
         }
         /* Set the values in the discrete gradient z-edges */
         {
            HYPRE_Int var = 2;
            HYPRE_Int ilower[3] = {0 + pi*n, 0 + pj*n, 1 + pk*n};
            HYPRE_Int iupper[3] = {n + pi*n, n + pj*n, n + pk*n};
            HYPRE_SStructMatrixSetBoxValues(G, part, ilower, iupper, var,
                                            stencil_size, stencil_indices,
                                            values);
         }

         free(values);
      }

      /* Finalize the matrix assembly */
      HYPRE_SStructMatrixAssemble(G);
   }

   /* 4. Create the vectors of nodal coordinates xcoord, ycoord and zcoord,
         which are needed in AMS. */
   {
      int i, j, k;
      HYPRE_Int part = 0;
      HYPRE_Int var = 0; /* the node variable */
      HYPRE_Int index[3];
      double xval, yval, zval;

      /* Create empty vector objects */
      HYPRE_SStructVectorCreate(MPI_COMM_WORLD, node_grid, &xcoord);
      HYPRE_SStructVectorCreate(MPI_COMM_WORLD, node_grid, &ycoord);
      HYPRE_SStructVectorCreate(MPI_COMM_WORLD, node_grid, &zcoord);
      /* Set the object type to ParCSR */
      HYPRE_SStructVectorSetObjectType(xcoord, HYPRE_PARCSR);
      HYPRE_SStructVectorSetObjectType(ycoord, HYPRE_PARCSR);
      HYPRE_SStructVectorSetObjectType(zcoord, HYPRE_PARCSR);
      /* Indicate that the vector coefficients are ready to be set */
      HYPRE_SStructVectorInitialize(xcoord);
      HYPRE_SStructVectorInitialize(ycoord);
      HYPRE_SStructVectorInitialize(zcoord);

      /* Compute and set the coordinates of the nodes */
      for (i = 0; i <= n; i++)
         for (j = 0; j <= n; j++)
            for (k = 0; k <= n; k++)
            {
               index[0] = i + pi*n; index[1] = j + pj*n; index[2] = k + pk*n;

               xval = index[0]*h;
               yval = index[1]*h;
               zval = index[2]*h;

               HYPRE_SStructVectorSetValues(xcoord, part, index, var, &xval);
               HYPRE_SStructVectorSetValues(ycoord, part, index, var, &yval);
               HYPRE_SStructVectorSetValues(zcoord, part, index, var, &zval);
            }

      /* Finalize the vector assembly */
      HYPRE_SStructVectorAssemble(xcoord);
      HYPRE_SStructVectorAssemble(ycoord);
      HYPRE_SStructVectorAssemble(zcoord);
   }

   /* 5. Set up a SStruct Vector for the solution vector x */
   {
      HYPRE_Int part = 0;
      int nvalues = n*(n+1)*(n+1);
      double *values;

      values = calloc(nvalues, sizeof(double));

      /* Create an empty vector object */
      HYPRE_SStructVectorCreate(MPI_COMM_WORLD, edge_grid, &x);
      /* Set the object type to ParCSR */
      HYPRE_SStructVectorSetObjectType(x, HYPRE_PARCSR);
      /* Indicate that the vector coefficients are ready to be set */
      HYPRE_SStructVectorInitialize(x);

      /* Set the values for the initial guess x-edge */
      {
         HYPRE_Int var = 0;
         HYPRE_Int ilower[3] = {1 + pi*n, 0 + pj*n, 0 + pk*n};
         HYPRE_Int iupper[3] = {n + pi*n, n + pj*n, n + pk*n};
         HYPRE_SStructVectorSetBoxValues(x, part, ilower, iupper, var, values);
      }
      /* Set the values for the initial guess y-edge */
      {
         HYPRE_Int var = 1;
         HYPRE_Int ilower[3] = {0 + pi*n, 1 + pj*n, 0 + pk*n};
         HYPRE_Int iupper[3] = {n + pi*n, n + pj*n, n + pk*n};
         HYPRE_SStructVectorSetBoxValues(x, part, ilower, iupper, var, values);
      }
      /* Set the values for the initial guess z-edge */
      {
         HYPRE_Int var = 2;
         HYPRE_Int ilower[3] = {0 + pi*n, 0 + pj*n, 1 + pk*n};
         HYPRE_Int iupper[3] = {n + pi*n, n + pj*n, n + pk*n};
         HYPRE_SStructVectorSetBoxValues(x, part, ilower, iupper, var, values);
      }

      free(values);

      /* Finalize the vector assembly */
      HYPRE_SStructVectorAssemble(x);
   }

   /* Finalize current timing */
   hypre_EndTiming(time_index);
   hypre_PrintTiming("SStruct phase times", MPI_COMM_WORLD);
   hypre_FinalizeTiming(time_index);
   hypre_ClearTiming();

   /* 6. Set up and call the PCG-AMS solver (Solver options can be found in the
         Reference Manual.) */
   {
      double final_res_norm;
      HYPRE_Int its;

      HYPRE_ParCSRMatrix    par_A;
      HYPRE_ParVector       par_b;
      HYPRE_ParVector       par_x;

      HYPRE_ParCSRMatrix    par_G;
      HYPRE_ParVector       par_xcoord;
      HYPRE_ParVector       par_ycoord;
      HYPRE_ParVector       par_zcoord;

      /* Extract the ParCSR objects needed in the solver */
      HYPRE_SStructMatrixGetObject(A, (void **) &par_A);
      HYPRE_SStructVectorGetObject(b, (void **) &par_b);
      HYPRE_SStructVectorGetObject(x, (void **) &par_x);
      HYPRE_SStructMatrixGetObject(G, (void **) &par_G);
      HYPRE_SStructVectorGetObject(xcoord, (void **) &par_xcoord);
      HYPRE_SStructVectorGetObject(ycoord, (void **) &par_ycoord);
      HYPRE_SStructVectorGetObject(zcoord, (void **) &par_zcoord);

      if (myid == 0)
         printf("Problem size: %lld\n\n",
             hypre_ParCSRMatrixGlobalNumRows((hypre_ParCSRMatrix*)par_A));

      /* Start timing */
      time_index = hypre_InitializeTiming("AMS Setup");
      hypre_BeginTiming(time_index);

      /* Create solver */
      HYPRE_ParCSRPCGCreate(MPI_COMM_WORLD, &solver);

      /* Set some parameters (See Reference Manual for more parameters) */
      HYPRE_PCGSetMaxIter(solver, maxit); /* max iterations */
      HYPRE_PCGSetTol(solver, tol); /* conv. tolerance */
      HYPRE_PCGSetTwoNorm(solver, 0); /* use the two norm as the stopping criteria */
      HYPRE_PCGSetPrintLevel(solver, 2); /* print solve info */
      HYPRE_PCGSetLogging(solver, 1); /* needed to get run info later */

      /* Create AMS preconditioner */
      HYPRE_AMSCreate(&precond);

      /* Set AMS parameters */
      HYPRE_AMSSetMaxIter(precond, 1);
      HYPRE_AMSSetTol(precond, 0.0);
      HYPRE_AMSSetCycleType(precond, cycle_type);
      HYPRE_AMSSetPrintLevel(precond, 1);

      /* Set discrete gradient */
      HYPRE_AMSSetDiscreteGradient(precond, par_G);

      /* Set vertex coordinates */
      HYPRE_AMSSetCoordinateVectors(precond,
                                    par_xcoord, par_ycoord, par_zcoord);

      if (singular_problem)
         HYPRE_AMSSetBetaPoissonMatrix(precond, NULL);

      /* Smoothing and AMG options */
      HYPRE_AMSSetSmoothingOptions(precond,
                                   rlx_type, rlx_sweeps,
                                   rlx_weight, rlx_omega);
      HYPRE_AMSSetAlphaAMGOptions(precond,
                                  amg_coarsen_type, amg_agg_levels,
                                  amg_rlx_type, theta, amg_interp_type,
                                  amg_Pmax);
      HYPRE_AMSSetBetaAMGOptions(precond,
                                 amg_coarsen_type, amg_agg_levels,
                                 amg_rlx_type, theta, amg_interp_type,
                                 amg_Pmax);

      /* Set the PCG preconditioner */
      HYPRE_PCGSetPrecond(solver,
                          (HYPRE_PtrToSolverFcn) HYPRE_AMSSolve,
                          (HYPRE_PtrToSolverFcn) HYPRE_AMSSetup,
                          precond);

      /* Call the setup */
      HYPRE_ParCSRPCGSetup(solver, par_A, par_b, par_x);

      /* Finalize current timing */
      hypre_EndTiming(time_index);
      hypre_PrintTiming("Setup phase times", MPI_COMM_WORLD);
      hypre_FinalizeTiming(time_index);
      hypre_ClearTiming();

      /* Start timing again */
      time_index = hypre_InitializeTiming("AMS Solve");
      hypre_BeginTiming(time_index);

      /* Call the solve */
      HYPRE_ParCSRPCGSolve(solver, par_A, par_b, par_x);

      /* Finalize current timing */
      hypre_EndTiming(time_index);
      hypre_PrintTiming("Solve phase times", MPI_COMM_WORLD);
      hypre_FinalizeTiming(time_index);
      hypre_ClearTiming();

      /* Get some info */
      HYPRE_PCGGetNumIterations(solver, &its);
      HYPRE_PCGGetFinalRelativeResidualNorm(solver, &final_res_norm);

      /* Clean up */
      HYPRE_AMSDestroy(precond);
      HYPRE_ParCSRPCGDestroy(solver);

      /* Gather the solution vector */
      HYPRE_SStructVectorGather(x);

      if (myid == 0)
      {
         printf("\n");
         printf("Iterations = %lld\n", its);
         printf("Final Relative Residual Norm = %g\n", final_res_norm);
         printf("\n");
      }
   }

   /* Free memory */
   HYPRE_SStructGridDestroy(edge_grid);
   HYPRE_SStructGraphDestroy(A_graph);
   HYPRE_SStructMatrixDestroy(A);
   HYPRE_SStructVectorDestroy(b);
   HYPRE_SStructVectorDestroy(x);
   HYPRE_SStructGridDestroy(node_grid);
   HYPRE_SStructGraphDestroy(G_graph);
   HYPRE_SStructStencilDestroy(G_stencil[0]);
   HYPRE_SStructStencilDestroy(G_stencil[1]);
   HYPRE_SStructStencilDestroy(G_stencil[2]);
   HYPRE_SStructMatrixDestroy(G);
   HYPRE_SStructVectorDestroy(xcoord);
   HYPRE_SStructVectorDestroy(ycoord);
   HYPRE_SStructVectorDestroy(zcoord);

   /* Finalize MPI */
   MPI_Finalize();

   return 0;
}