ULONG
NdisImmediateWritePciSlotInformation(
IN NDIS_HANDLE WrapperConfigurationContext,
IN ULONG SlotNumber,
IN ULONG Offset,
IN PVOID Buffer,
IN ULONG Length
)
/*++
Routine Description:
This routine writes to the PCI configuration space a specified
length of bytes at a certain offset.
Arguments:
WrapperConfigurationContext - Context passed to MacAddAdapter.
SlotNumber - The slot number of the device.
Offset - Offset to read from
Buffer - Place to store the bytes
Length - Number of bytes to read
Return Value:
Returns the number of bytes written.
--*/
{
ULONG DataLength = 0;
ULONG BusNumber;
PRTL_QUERY_REGISTRY_TABLE KeyQueryTable;
KeyQueryTable = (PRTL_QUERY_REGISTRY_TABLE)WrapperConfigurationContext;
BusNumber = KeyQueryTable[3].DefaultLength;
ASSERT((NDIS_INTERFACE_TYPE)(KeyQueryTable[3].DefaultType) == NdisInterfacePci);
DataLength = HalSetBusDataByOffset(PCIConfiguration,
BusNumber,
SlotNumber,
Buffer,
Offset,
Length);
return DataLength;
}
/*
* @implemented
*/
ULONG
NTAPI
HalSetBusData(IN BUS_DATA_TYPE BusDataType,
IN ULONG BusNumber,
IN ULONG SlotNumber,
IN PVOID Buffer,
IN ULONG Length)
{
/* Call the extended function */
return HalSetBusDataByOffset(BusDataType,
BusNumber,
SlotNumber,
Buffer,
0,
Length);
}
BOOL
CSDHCBase::InitializeHardware(
)
{
SETFNAME(_T("InitializeHardware"));
DEBUGCHK(m_hBusAccess);
DEBUGCHK(m_regDevice.IsOK());
PREFAST_DEBUGCHK(m_pSlotInfos);
RETAILMSG(0,(TEXT("CSDHCBase::InitializeHardware\n")));
ValidateSlotCount();
BOOL fRet = FALSE;
PHYSICAL_ADDRESS PortAddress;
DWORD inIoSpace = 0;
// Read window information
DDKWINDOWINFO wini;
wini.cbSize = sizeof(wini);
DWORD dwStatus = DDKReg_GetWindowInfo(m_regDevice, &wini);
if (dwStatus != ERROR_SUCCESS) {
DEBUGMSG(SDCARD_ZONE_ERROR, (_T("%s Error getting window information\r\n"),
pszFname));
goto EXIT;
}
// Read ISR information
DDKISRINFO isri;
isri.cbSize = sizeof(isri);
dwStatus = DDKReg_GetIsrInfo(m_regDevice, &isri);
if (dwStatus != ERROR_SUCCESS) {
DEBUGMSG(SDCARD_ZONE_ERROR, (_T("%s Error getting ISR information\r\n"),
pszFname));
goto EXIT;
}
#ifdef SET_TI_BOARD_PCI_REG
{
DDKPCIINFO dpi;
dpi.cbSize = sizeof(dpi);
DDKReg_GetPciInfo(m_regDevice, &dpi);
DWORD RetVal;
PCI_SLOT_NUMBER SlotNumber;
SlotNumber.u.AsULONG = 0;
SlotNumber.u.bits.DeviceNumber = dpi.dwDeviceNumber;
SlotNumber.u.bits.FunctionNumber = 1;
HalGetBusDataByOffset( PCIConfiguration,
wini.dwBusNumber,
SlotNumber.u.AsULONG,
&RetVal,
0x84,
sizeof( RetVal ) );
if (!(RetVal & 0x00200000)) {
RetVal |= 0x00200000;
HalSetBusDataByOffset( PCIConfiguration,
wini.dwBusNumber,
SlotNumber.u.AsULONG,
&RetVal,
0x84,
sizeof( RetVal ) );
}
}
#endif
// Sanity check ISR
if (isri.dwSysintr == SYSINTR_NOP) {
RETAILMSG(0,(TEXT("%s No sysintr specified in registry\r\n"),pszFname));
DEBUGMSG(SDCARD_ZONE_ERROR, (_T("%s No sysintr specified in registry\r\n"),
pszFname));
goto EXIT;
}
if (isri.szIsrDll[0] != 0) {
if ( (isri.szIsrHandler[0] == 0) || (isri.dwIrq == IRQ_UNSPECIFIED) ) {
DEBUGMSG(SDCARD_ZONE_ERROR, (_T("%s Invalid installable ISR information in registry\r\n"),
pszFname));
goto EXIT;
}
}
m_interfaceType = (INTERFACE_TYPE) wini.dwInterfaceType;
m_dwBusNumber = wini.dwBusNumber;
DWORD dwSlotZeroWindow;
dwSlotZeroWindow = DetermineFirstSlotWindow(&wini);
DEBUGCHK(dwSlotZeroWindow < wini.dwNumMemWindows);
DEBUGCHK( (dwSlotZeroWindow + m_cSlots) <= wini.dwNumMemWindows );
// Use the slot zero window for the ISR
PDEVICEWINDOW pWindowSlotZero = &wini.memWindows[dwSlotZeroWindow];
PortAddress.LowPart = pWindowSlotZero->dwBase;
PortAddress.HighPart = 0;
RETAILMSG(0,(TEXT("CSDHCBase::InitializeHardware go on...\n")));
// Install an ISR, if present
if (isri.szIsrDll[0] != 0) {
m_hISRHandler = LoadIntChainHandler(isri.szIsrDll, isri.szIsrHandler,
(BYTE) isri.dwIrq);
if (m_hISRHandler == NULL) {
DEBUGMSG(SDCARD_ZONE_ERROR, (_T("%s Error installing ISR\r\n"), pszFname));
goto EXIT;
}
else {
GIISR_INFO Info;
DWORD dwPhysAddr;
fRet = BusTransBusAddrToStatic(m_hBusAccess,
(INTERFACE_TYPE) wini.dwInterfaceType,
wini.dwBusNumber, PortAddress, pWindowSlotZero->dwLen,
&inIoSpace, (PVOID *) &dwPhysAddr);
if (fRet == FALSE) {
DEBUGMSG(SDCARD_ZONE_ERROR,
(_T("%s Error translating bus address to static address\r\n"),
pszFname));
goto EXIT;
}
// Initialize ISR
Info.SysIntr = isri.dwSysintr;
Info.CheckPort = TRUE;
Info.PortIsIO = (inIoSpace != 0);
Info.UseMaskReg = FALSE;
Info.PortAddr = dwPhysAddr + SDHC_SLOT_INT_STATUS;
Info.PortSize = sizeof(USHORT);
Info.Mask = 0xFF;
fRet = KernelLibIoControl(m_hISRHandler, IOCTL_GIISR_INFO, &Info,
sizeof(Info), NULL, 0, NULL);
if (fRet == FALSE) {
DEBUGMSG(SDCARD_ZONE_ERROR, (_T("%s Error setting up ISR\r\n"), pszFname));
goto EXIT;
}
}
}
m_dwSysIntr = isri.dwSysintr;
DEBUGMSG(SDCARD_ZONE_INIT, (_T("%s IRQ 0x%X mapped to SYS_INTR 0x%X\r\n"),
pszFname, isri.dwIrq, m_dwSysIntr));
const DWORD dwEndWindow = dwSlotZeroWindow + m_cSlots;
for (DWORD dwWindow = dwSlotZeroWindow; dwWindow < dwEndWindow; ++dwWindow) {
DEBUGCHK(dwWindow < wini.dwNumMemWindows);
PDEVICEWINDOW pWindowSD = &wini.memWindows[dwWindow];
DEBUGMSG(SDCARD_ZONE_INIT,
(_T("%s Base address -> 0x%x; length -> 0x%x \r\n"),
pszFname, pWindowSD->dwBase, pWindowSD->dwLen));
PortAddress.LowPart = pWindowSD->dwBase;
PortAddress.HighPart = 0;
inIoSpace = 0;
PVOID pvRegisters;
DEBUGCHK(pWindowSlotZero->dwLen >= sizeof(SSDHC_REGISTERS));
RETAILMSG(0,(TEXT("BusTransBusAddrToVirtual. 0x%X\n"),PortAddress));
fRet = BusTransBusAddrToVirtual(m_hBusAccess,
(INTERFACE_TYPE) wini.dwInterfaceType,
wini.dwBusNumber, PortAddress, pWindowSD->dwLen, &inIoSpace,
&pvRegisters);
if (fRet == FALSE) {
RETAILMSG(0,(TEXT("%s error translating SD address \r\n"),pszFname));
DEBUGMSG(SDCARD_ZONE_ERROR,
(_T("%s error translating SD address \r\n"),
pszFname));
goto EXIT;
}
DEBUGCHK(inIoSpace == 0); // Will not work for I/O mappings.
DWORD dwSlot = dwWindow - dwSlotZeroWindow;
DEBUGCHK(dwSlot < m_cSlots);
m_pSlotInfos[dwSlot].pucRegisters = (volatile UCHAR*) pvRegisters;
m_pSlotInfos[dwSlot].dwExtraInfo = pWindowSD->dwLen;
}
m_fHardwareInitialized = TRUE;
fRet = TRUE;
RETAILMSG(0,(TEXT("CSDHCBase::InitializeHardware finished.\n")));
EXIT:
return fRet;
}
VOID
KdpSetBusData (
IN PDBGKD_MANIPULATE_STATE64 m,
IN PSTRING AdditionalData,
IN PCONTEXT Context
)
/*++
Routine Description:
This function is called in response to a set bus data state
manipulation message. Its function is to write I/O configuration
space.
Arguments:
m - Supplies the state manipulation message.
AdditionalData - Supplies any additional data for the message.
Context - Supplies the current context.
Return Value:
None.
--*/
{
PDBGKD_GET_SET_BUS_DATA a = &m->u.GetSetBusData;
ULONG Length;
STRING MessageHeader;
MessageHeader.Length = sizeof(*m);
MessageHeader.Buffer = (PCHAR)m;
m->ReturnStatus = STATUS_SUCCESS;
//
// Get the bus data.
//
Length = HalSetBusDataByOffset(
a->BusDataType,
a->BusNumber,
a->SlotNumber,
AdditionalData->Buffer,
a->Offset,
a->Length
);
//
// Update the data length.
//
a->Length = Length;
KdpSendPacket(
PACKET_TYPE_KD_STATE_MANIPULATE,
&MessageHeader,
NULL
);
}
ULONG
NdisWritePciSlotInformation(
IN NDIS_HANDLE NdisAdapterHandle,
IN ULONG SlotNumber,
IN ULONG Offset,
IN PVOID Buffer,
IN ULONG Length
)
/*++
Routine Description:
This routine writes to the PCI configuration space a specified
length of bytes at a certain offset.
Arguments:
NdisAdapterHandle - Adapter we are talking about.
SlotNumber - The slot number of the device.
Offset - Offset to read from
Buffer - Place to store the bytes
Length - Number of bytes to read
Return Value:
Returns the number of bytes written.
--*/
{
ULONG DataLength = 0;
PNDIS_ADAPTER_BLOCK Adapter = (PNDIS_ADAPTER_BLOCK)NdisAdapterHandle;
PNDIS_MINIPORT_BLOCK Miniport = (PNDIS_MINIPORT_BLOCK)NdisAdapterHandle;
if (Adapter->DeviceObject == NULL)
{
//
// This is a mini-port
//
ASSERT(Miniport->BusType == NdisInterfacePci);
DataLength = HalSetBusDataByOffset(PCIConfiguration,
Miniport->BusNumber,
SlotNumber,
Buffer,
Offset,
Length);
}
else
{
ASSERT(Adapter->BusType == NdisInterfacePci);
DataLength = HalSetBusDataByOffset(PCIConfiguration,
Adapter->BusNumber,
SlotNumber,
Buffer,
Offset,
Length);
}
return DataLength;
}