/*
 * Calculate the reference id from the address. If it is an IPv4
 * address, use it as is. If it is an IPv6 address, do a md5 on
 * it and use the bottom 4 bytes.
 * The result is in network byte order.
 */
u_int32
addr2refid(sockaddr_u *addr)
{
	u_char		digest[20];
	u_int32		addr_refid;
	EVP_MD_CTX	ctx;
	u_int		len;

	if (IS_IPV4(addr))
		return (NSRCADR(addr));

	INIT_SSL();

#if defined(OPENSSL) && OPENSSL_VERSION_NUMBER >= 0x0090700fL
	EVP_MD_CTX_init(&ctx);
#ifdef EVP_MD_CTX_FLAG_NON_FIPS_ALLOW
	/* MD5 is not used as a crypto hash here. */
	EVP_MD_CTX_set_flags(&ctx, EVP_MD_CTX_FLAG_NON_FIPS_ALLOW);
#endif
	if (!EVP_DigestInit_ex(&ctx, EVP_md5(), NULL)) {
		msyslog(LOG_ERR,
		    "MD5 init failed");
		exit(1);
	}
#else
	EVP_DigestInit(&ctx, EVP_md5());
#endif

	EVP_DigestUpdate(&ctx, (u_char *)PSOCK_ADDR6(addr),
	    sizeof(struct in6_addr));
	EVP_DigestFinal(&ctx, digest, &len);
	memcpy(&addr_refid, digest, sizeof(addr_refid));
	return (addr_refid);
}
Exemple #2
0
/*
 * keytype_from_text	returns OpenSSL NID for digest by name, and
 *			optionally the associated digest length.
 *
 * Used by ntpd authreadkeys(), ntpq keytype()
 */
int
keytype_from_text(
	const char *text,
	size_t *pdigest_len
	)
{
	int		key_type;
	u_int		digest_len;
#ifdef HAVE_OPENSSL
	const u_long	max_digest_len = MAX_MAC_LEN - sizeof(keyid_t);
	uint8_t		digest[EVP_MAX_MD_SIZE];
	char *		upcased;
	char *		pch;
	EVP_MD_CTX	ctx;

	/*
	 * OpenSSL digest short names are capitalized, so uppercase the
	 * digest name before passing to OBJ_sn2nid().  If it is not
	 * recognized but begins with 'M' use NID_md5 to be consistent
	 * with past behavior.
	 */
	INIT_SSL();
	LIB_GETBUF(upcased);
	strlcpy(upcased, text, LIB_BUFLENGTH);
	for (pch = upcased; '\0' != *pch; pch++)
		*pch = (char)toupper((unsigned char)*pch);
	key_type = OBJ_sn2nid(upcased);
#else
	key_type = 0;
#endif

	if (!key_type && 'm' == tolower((unsigned char)text[0]))
		key_type = NID_md5;

	if (!key_type)
		return 0;

	if (NULL != pdigest_len) {
#ifdef HAVE_OPENSSL
		EVP_DigestInit(&ctx, EVP_get_digestbynid(key_type));
		EVP_DigestFinal(&ctx, digest, &digest_len);
		if (digest_len > max_digest_len) {
			fprintf(stderr,
				"key type %s %u octet digests are too big, max %lu\n",
				keytype_name(key_type), digest_len,
				max_digest_len);
			msyslog(LOG_ERR,
				"key type %s %u octet digests are too big, max %lu",
				keytype_name(key_type), digest_len,
				max_digest_len);
			return 0;
		}
#else
		digest_len = 16;
#endif
		*pdigest_len = digest_len;
	}

	return key_type;
}
/*
 * MD5authencrypt - generate message digest
 *
 * Returns length of MAC including key ID and digest.
 */
int
MD5authencrypt(
	int	type,		/* hash algorithm */
	u_char	*key,		/* key pointer */
	u_int32 *pkt,		/* packet pointer */
	int	length		/* packet length */
	)
{
	u_char	digest[EVP_MAX_MD_SIZE];
	u_int	len;
	EVP_MD_CTX ctx;

	/*
	 * Compute digest of key concatenated with packet. Note: the
	 * key type and digest type have been verified when the key
	 * was creaded.
	 */
	INIT_SSL();
#if defined(OPENSSL) && OPENSSL_VERSION_NUMBER >= 0x0090700fL
	if (!EVP_DigestInit(&ctx, EVP_get_digestbynid(type))) {
		msyslog(LOG_ERR,
		    "MAC encrypt: digest init failed");
		return (0);
	}
#else
	EVP_DigestInit(&ctx, EVP_get_digestbynid(type));
#endif
	EVP_DigestUpdate(&ctx, key, cache_secretsize);
	EVP_DigestUpdate(&ctx, (u_char *)pkt, (u_int)length);
	EVP_DigestFinal(&ctx, digest, &len);
	memmove((u_char *)pkt + length + 4, digest, len);
	return (len + 4);
}
Exemple #4
0
/*
 * MD5authdecrypt - verify MD5 message authenticator
 *
 * Returns one if digest valid, zero if invalid.
 */
int
MD5authdecrypt(
	int	type,		/* hash algorithm */
	u_char	*key,		/* key pointer */
	u_int32	*pkt,		/* packet pointer */
	int	length,	 	/* packet length */
	int	size		/* MAC size */
	)
{
	u_char	digest[EVP_MAX_MD_SIZE];
	u_int	len;
	EVP_MD_CTX ctx;

	/*
	 * Compute digest of key concatenated with packet. Note: the
	 * key type and digest type have been verified when the key
	 * was created.
	 */
	INIT_SSL();
	EVP_DigestInit(&ctx, EVP_get_digestbynid(type));
	EVP_DigestUpdate(&ctx, key, (u_int)cache_keylen);
	EVP_DigestUpdate(&ctx, (u_char *)pkt, (u_int)length);
	EVP_DigestFinal(&ctx, digest, &len);
	if ((u_int)size != len + 4) {
		msyslog(LOG_ERR,
		    "MAC decrypt: MAC length error");
		return (0);
	}
	return (!memcmp(digest, (char *)pkt + length + 4, len));
}
Exemple #5
0
/*
 * MD5authencrypt - generate message digest
 *
 * Returns length of MAC including key ID and digest.
 */
int
MD5authencrypt(
	int	type,		/* hash algorithm */
	u_char	*key,		/* key pointer */
	u_int32 *pkt,		/* packet pointer */
	int	length		/* packet length */
	)
{
	u_char	digest[EVP_MAX_MD_SIZE];
	u_int	len;
	EVP_MD_CTX ctx;

	/*
	 * Compute digest of key concatenated with packet. Note: the
	 * key type and digest type have been verified when the key
	 * was creaded.
	 */
	INIT_SSL();
	EVP_DigestInit(&ctx, EVP_get_digestbynid(type));
	EVP_DigestUpdate(&ctx, key, (u_int)cache_keylen);
	EVP_DigestUpdate(&ctx, (u_char *)pkt, (u_int)length);
	EVP_DigestFinal(&ctx, digest, &len);
	memmove((u_char *)pkt + length + 4, digest, len);
	return (len + 4);
}
Exemple #6
0
void
ssl_check_version(void)
{
	if ((SSLeay() ^ OPENSSL_VERSION_NUMBER) & ~0xff0L) {
		msyslog(LOG_WARNING,
		    "OpenSSL version mismatch. Built against %lx, you have %lx",
		    (u_long)OPENSSL_VERSION_NUMBER, SSLeay());
		fprintf(stderr,
		    "OpenSSL version mismatch. Built against %lx, you have %lx\n",
		    (u_long)OPENSSL_VERSION_NUMBER, SSLeay());
	}

	INIT_SSL();
}
Exemple #7
0
/*
 * Calculate the reference id from the address. If it is an IPv4
 * address, use it as is. If it is an IPv6 address, do a md5 on
 * it and use the bottom 4 bytes.
 * The result is in network byte order.
 */
u_int32
addr2refid(sockaddr_u *addr)
{
	u_char		digest[20];
	u_int32		addr_refid;
	EVP_MD_CTX	ctx;
	u_int		len;

	if (IS_IPV4(addr))
		return (NSRCADR(addr));

	INIT_SSL();
	EVP_DigestInit(&ctx, EVP_get_digestbynid(NID_md5));
	EVP_DigestUpdate(&ctx, (u_char *)PSOCK_ADDR6(addr),
	    sizeof(struct in6_addr));
	EVP_DigestFinal(&ctx, digest, &len);
	memcpy(&addr_refid, digest, 4);
	return (addr_refid);
}
Exemple #8
0
/*
 * keytype_name		returns OpenSSL short name for digest by NID.
 *
 * Used by ntpq keytype()
 */
const char *
keytype_name(
	int nid
	)
{
	static const char unknown_type[] = "(unknown key type)";
	const char *name;

#ifdef HAVE_OPENSSL
	INIT_SSL();
	name = OBJ_nid2sn(nid);
	if (NULL == name)
		name = unknown_type;
#else	/* !HAVE_OPENSSL follows */
	if (NID_md5 == nid)
		name = "MD5";
	else
		name = unknown_type;
#endif
	return name;
}
Exemple #9
0
/*
 * MD5authdecrypt - verify MD5 message authenticator
 *
 * Returns one if digest valid, zero if invalid.
 */
int
MD5authdecrypt(
	int	type,		/* hash algorithm */
	uint8_t	*key,		/* key pointer */
	uint32_t	*pkt,		/* packet pointer */
	int	length,	 	/* packet length */
	int	size		/* MAC size */
	)
{
	uint8_t	digest[EVP_MAX_MD_SIZE];
	u_int	len;
	EVP_MD_CTX ctx;

	UNUSED_ARG(type);
	/*
	 * Compute digest of key concatenated with packet. Note: the
	 * key type and digest type have been verified when the key
	 * was created.
	 */
	INIT_SSL();
#if defined(HAVE_OPENSSL)
	if (!EVP_DigestInit(&ctx, EVP_get_digestbynid(type))) {
		msyslog(LOG_ERR,
		    "MAC decrypt: digest init failed");
		return (0);
	}
#else
	EVP_DigestInit(&ctx, EVP_get_digestbynid(type));
#endif
	EVP_DigestUpdate(&ctx, key, cache_secretsize);
	EVP_DigestUpdate(&ctx, (uint8_t *)pkt, (u_int)length);
	EVP_DigestFinal(&ctx, digest, &len);
	if ((u_int)size != len + 4) {
		msyslog(LOG_ERR,
		    "MAC decrypt: MAC length error");
		return (0);
	}
	return (int)ctmemeq(digest, (char *)pkt + length + 4, len);
}
Exemple #10
0
/*
 * authreadkeys - (re)read keys from a file.
 */
int
authreadkeys(
	const char *file
	)
{
	FILE	*fp;
	char	*line;
	char	*token;
	keyid_t	keyno;
	int	keytype;
	char	buf[512];		/* lots of room for line */
	u_char	keystr[32];		/* Bug 2537 */
	size_t	len;
	size_t	j;
	u_int   nerr;
	KeyDataT *list = NULL;
	KeyDataT *next = NULL;
	/*
	 * Open file.  Complain and return if it can't be opened.
	 */
	fp = fopen(file, "r");
	if (fp == NULL) {
		msyslog(LOG_ERR, "authreadkeys: file '%s': %m",
		    file);
		goto onerror;
	}
	INIT_SSL();

	/*
	 * Now read lines from the file, looking for key entries. Put
	 * the data into temporary store for later propagation to avoid
	 * two-pass processing.
	 */
	nerr = 0;
	while ((line = fgets(buf, sizeof buf, fp)) != NULL) {
		if (nerr > nerr_maxlimit)
			break;
		token = nexttok(&line);
		if (token == NULL)
			continue;
		
		/*
		 * First is key number.  See if it is okay.
		 */
		keyno = atoi(token);
		if (keyno == 0) {
			log_maybe(&nerr,
				  "authreadkeys: cannot change key %s",
				  token);
			continue;
		}

		if (keyno > NTP_MAXKEY) {
			log_maybe(&nerr,
				  "authreadkeys: key %s > %d reserved for Autokey",
				  token, NTP_MAXKEY);
			continue;
		}

		/*
		 * Next is keytype. See if that is all right.
		 */
		token = nexttok(&line);
		if (token == NULL) {
			log_maybe(&nerr,
				  "authreadkeys: no key type for key %d",
				  keyno);
			continue;
		}
#ifdef OPENSSL
		/*
		 * The key type is the NID used by the message digest 
		 * algorithm. There are a number of inconsistencies in
		 * the OpenSSL database. We attempt to discover them
		 * here and prevent use of inconsistent data later.
		 */
		keytype = keytype_from_text(token, NULL);
		if (keytype == 0) {
			log_maybe(&nerr,
				  "authreadkeys: invalid type for key %d",
				  keyno);
			continue;
		}
		if (EVP_get_digestbynid(keytype) == NULL) {
			log_maybe(&nerr,
				  "authreadkeys: no algorithm for key %d",
				  keyno);
			continue;
		}
#else	/* !OPENSSL follows */

		/*
		 * The key type is unused, but is required to be 'M' or
		 * 'm' for compatibility.
		 */
		if (!(*token == 'M' || *token == 'm')) {
			log_maybe(&nerr,
				  "authreadkeys: invalid type for key %d",
				  keyno);
			continue;
		}
		keytype = KEY_TYPE_MD5;
#endif	/* !OPENSSL */

		/*
		 * Finally, get key and insert it. If it is longer than 20
		 * characters, it is a binary string encoded in hex;
		 * otherwise, it is a text string of printable ASCII
		 * characters.
		 */
		token = nexttok(&line);
		if (token == NULL) {
			log_maybe(&nerr,
				  "authreadkeys: no key for key %d", keyno);
			continue;
		}
		next = NULL;
		len = strlen(token);
		if (len <= 20) {	/* Bug 2537 */
			next = emalloc(sizeof(KeyDataT) + len);
			next->keyacclist = NULL;
			next->keyid   = keyno;
			next->keytype = keytype;
			next->seclen  = len;
			memcpy(next->secbuf, token, len);
		} else {
			static const char hex[] = "0123456789abcdef";
			u_char	temp;
			char	*ptr;
			size_t	jlim;

			jlim = min(len, 2 * sizeof(keystr));
			for (j = 0; j < jlim; j++) {
				ptr = strchr(hex, tolower((unsigned char)token[j]));
				if (ptr == NULL)
					break;	/* abort decoding */
				temp = (u_char)(ptr - hex);
				if (j & 1)
					keystr[j / 2] |= temp;
				else
					keystr[j / 2] = temp << 4;
			}
			if (j < jlim) {
				log_maybe(&nerr,
					  "authreadkeys: invalid hex digit for key %d",
					  keyno);
				continue;
			}
			len = jlim/2; /* hmmmm.... what about odd length?!? */
			next = emalloc(sizeof(KeyDataT) + len);
			next->keyacclist = NULL;
			next->keyid   = keyno;
			next->keytype = keytype;
			next->seclen  = len;
			memcpy(next->secbuf, keystr, len);
		}

		token = nexttok(&line);
DPRINTF(0, ("authreadkeys: full access list <%s>\n", (token) ? token : "NULL"));
		if (token != NULL) {	/* A comma-separated IP access list */
			char *tp = token;

			while (tp) {
				char *i;
				KeyAccT ka;

				i = strchr(tp, (int)',');
				if (i)
					*i = '\0';
DPRINTF(0, ("authreadkeys: access list:  <%s>\n", tp));

				if (is_ip_address(tp, AF_UNSPEC, &ka.addr)) {
					KeyAccT *kap;

					kap = emalloc(sizeof(KeyAccT));
					memcpy(kap, &ka, sizeof ka);
					kap->next = next->keyacclist;
					next->keyacclist = kap;
				} else {
					log_maybe(&nerr,
						  "authreadkeys: invalid IP address <%s> for key %d",
						  tp, keyno);
				}

				if (i) {
					tp = i + 1;
				} else {
					tp = 0;
				}
			}
		}

		INSIST(NULL != next);
		next->next = list;
		list = next;
	}
	fclose(fp);
	if (nerr > nerr_maxlimit) {
		msyslog(LOG_ERR,
			"authreadkeys: rejecting file '%s' after %u errors (emergency break)",
			file, nerr);
		goto onerror;
	}
	if (nerr > 0) {
		msyslog(LOG_ERR,
			"authreadkeys: rejecting file '%s' after %u error(s)",
			file, nerr);
		goto onerror;
	}

	/* first remove old file-based keys */
	auth_delkeys();
	/* insert the new key material */
	while (NULL != (next = list)) {
		list = next->next;
		MD5auth_setkey(next->keyid, next->keytype,
			       next->secbuf, next->seclen, next->keyacclist);
		/* purge secrets from memory before free()ing it */
		memset(next, 0, sizeof(*next) + next->seclen);
		free(next);
	}
	return (1);

  onerror:
	/* Mop up temporary storage before bailing out. */
	while (NULL != (next = list)) {
		list = next->next;

		while (next->keyacclist) {
			KeyAccT *kap = next->keyacclist;

			next->keyacclist = kap->next;
			free(kap);
		}

		/* purge secrets from memory before free()ing it */
		memset(next, 0, sizeof(*next) + next->seclen);
		free(next);
	}
	return (0);
}
Exemple #11
0
int
ntpdmain(
	int argc,
	char *argv[]
	)
{
	l_fp		now;
	struct recvbuf *rbuf;
	const char *	logfilename;
# ifdef HAVE_UMASK
	mode_t		uv;
# endif
# if defined(HAVE_GETUID) && !defined(MPE) /* MPE lacks the concept of root */
	uid_t		uid;
# endif
# if defined(HAVE_WORKING_FORK)
	long		wait_sync = 0;
	int		pipe_fds[2];
	int		rc;
	int		exit_code;
#  ifdef _AIX
	struct sigaction sa;
#  endif
#  if !defined(HAVE_SETSID) && !defined (HAVE_SETPGID) && defined(TIOCNOTTY)
	int		fid;
#  endif
# endif	/* HAVE_WORKING_FORK*/
# ifdef SCO5_CLOCK
	int		fd;
	int		zero;
# endif

# ifdef NEED_PTHREAD_WARMUP
	my_pthread_warmup();
# endif
	
# ifdef HAVE_UMASK
	uv = umask(0);
	if (uv)
		umask(uv);
	else
		umask(022);
# endif
	saved_argc = argc;
	saved_argv = argv;
	progname = argv[0];
	initializing = TRUE;		/* mark that we are initializing */
	parse_cmdline_opts(&argc, &argv);
# ifdef DEBUG
	debug = OPT_VALUE_SET_DEBUG_LEVEL;
#  ifdef HAVE_SETLINEBUF
	setlinebuf(stdout);
#  endif
# endif

	if (HAVE_OPT(NOFORK) || HAVE_OPT(QUIT)
# ifdef DEBUG
	    || debug
# endif
	    || HAVE_OPT(SAVECONFIGQUIT))
		nofork = TRUE;

	init_logging(progname, NLOG_SYNCMASK, TRUE);
	/* honor -l/--logfile option to log to a file */
	if (HAVE_OPT(LOGFILE)) {
		logfilename = OPT_ARG(LOGFILE);
		syslogit = FALSE;
		change_logfile(logfilename, FALSE);
	} else {
		logfilename = NULL;
		if (nofork)
			msyslog_term = TRUE;
		if (HAVE_OPT(SAVECONFIGQUIT))
			syslogit = FALSE;
	}
	msyslog(LOG_NOTICE, "%s: Starting", Version);

	{
		int i;
		char buf[1024];	/* Secret knowledge of msyslog buf length */
		char *cp = buf;

		/* Note that every arg has an initial space character */
		snprintf(cp, sizeof(buf), "Command line:");
		cp += strlen(cp);

		for (i = 0; i < saved_argc ; ++i) {
			snprintf(cp, sizeof(buf) - (cp - buf),
				" %s", saved_argv[i]);
			cp += strlen(cp);
		}
		msyslog(LOG_INFO, "%s", buf);
	}

	/*
	 * Install trap handlers to log errors and assertion failures.
	 * Default handlers print to stderr which doesn't work if detached.
	 */
	isc_assertion_setcallback(assertion_failed);
	isc_error_setfatal(library_fatal_error);
	isc_error_setunexpected(library_unexpected_error);

	/* MPE lacks the concept of root */
# if defined(HAVE_GETUID) && !defined(MPE)
	uid = getuid();
	if (uid && !HAVE_OPT( SAVECONFIGQUIT )) {
		msyslog_term = TRUE;
		msyslog(LOG_ERR,
			"must be run as root, not uid %ld", (long)uid);
		exit(1);
	}
# endif

/*
 * Enable the Multi-Media Timer for Windows?
 */
# ifdef SYS_WINNT
	if (HAVE_OPT( MODIFYMMTIMER ))
		set_mm_timer(MM_TIMER_HIRES);
# endif

#ifdef HAVE_DNSREGISTRATION
/*
 * Enable mDNS registrations?
 */
	if (HAVE_OPT( MDNS )) {
		mdnsreg = TRUE;
	}
#endif  /* HAVE_DNSREGISTRATION */

	if (HAVE_OPT( NOVIRTUALIPS ))
		listen_to_virtual_ips = 0;

	/*
	 * --interface, listen on specified interfaces
	 */
	if (HAVE_OPT( INTERFACE )) {
		int		ifacect = STACKCT_OPT( INTERFACE );
		const char**	ifaces  = STACKLST_OPT( INTERFACE );
		sockaddr_u	addr;

		while (ifacect-- > 0) {
			add_nic_rule(
				is_ip_address(*ifaces, AF_UNSPEC, &addr)
					? MATCH_IFADDR
					: MATCH_IFNAME,
				*ifaces, -1, ACTION_LISTEN);
			ifaces++;
		}
	}

	if (HAVE_OPT( NICE ))
		priority_done = 0;

# ifdef HAVE_SCHED_SETSCHEDULER
	if (HAVE_OPT( PRIORITY )) {
		config_priority = OPT_VALUE_PRIORITY;
		config_priority_override = 1;
		priority_done = 0;
	}
# endif

# ifdef HAVE_WORKING_FORK
	/* make sure the FDs are initialised */
	pipe_fds[0] = -1;
	pipe_fds[1] = -1;
	do {					/* 'loop' once */
		if (!HAVE_OPT( WAIT_SYNC ))
			break;
		wait_sync = OPT_VALUE_WAIT_SYNC;
		if (wait_sync <= 0) {
			wait_sync = 0;
			break;
		}
		/* -w requires a fork() even with debug > 0 */
		nofork = FALSE;
		if (pipe(pipe_fds)) {
			exit_code = (errno) ? errno : -1;
			msyslog(LOG_ERR,
				"Pipe creation failed for --wait-sync: %m");
			exit(exit_code);
		}
		waitsync_fd_to_close = pipe_fds[1];
	} while (0);				/* 'loop' once */
# endif	/* HAVE_WORKING_FORK */

	init_lib();
# ifdef SYS_WINNT
	/*
	 * Start interpolation thread, must occur before first
	 * get_systime()
	 */
	init_winnt_time();
# endif
	/*
	 * Initialize random generator and public key pair
	 */
	get_systime(&now);

	ntp_srandom((int)(now.l_i * now.l_uf));

	/*
	 * Detach us from the terminal.  May need an #ifndef GIZMO.
	 */
	if (!nofork) {

# ifdef HAVE_WORKING_FORK
		rc = fork();
		if (-1 == rc) {
			exit_code = (errno) ? errno : -1;
			msyslog(LOG_ERR, "fork: %m");
			exit(exit_code);
		}
		if (rc > 0) {	
			/* parent */
			exit_code = wait_child_sync_if(pipe_fds[0],
						       wait_sync);
			exit(exit_code);
		}
		
		/*
		 * child/daemon 
		 * close all open files excepting waitsync_fd_to_close.
		 * msyslog() unreliable until after init_logging().
		 */
		closelog();
		if (syslog_file != NULL) {
			fclose(syslog_file);
			syslog_file = NULL;
			syslogit = TRUE;
		}
		close_all_except(waitsync_fd_to_close);
		INSIST(0 == open("/dev/null", 0) && 1 == dup2(0, 1) \
			&& 2 == dup2(0, 2));

		init_logging(progname, 0, TRUE);
		/* we lost our logfile (if any) daemonizing */
		setup_logfile(logfilename);

#  ifdef SYS_DOMAINOS
		{
			uid_$t puid;
			status_$t st;

			proc2_$who_am_i(&puid);
			proc2_$make_server(&puid, &st);
		}
#  endif	/* SYS_DOMAINOS */
#  ifdef HAVE_SETSID
		if (setsid() == (pid_t)-1)
			msyslog(LOG_ERR, "setsid(): %m");
#  elif defined(HAVE_SETPGID)
		if (setpgid(0, 0) == -1)
			msyslog(LOG_ERR, "setpgid(): %m");
#  else		/* !HAVE_SETSID && !HAVE_SETPGID follows */
#   ifdef TIOCNOTTY
		fid = open("/dev/tty", 2);
		if (fid >= 0) {
			ioctl(fid, (u_long)TIOCNOTTY, NULL);
			close(fid);
		}
#   endif	/* TIOCNOTTY */
		ntp_setpgrp(0, getpid());
#  endif	/* !HAVE_SETSID && !HAVE_SETPGID */
#  ifdef _AIX
		/* Don't get killed by low-on-memory signal. */
		sa.sa_handler = catch_danger;
		sigemptyset(&sa.sa_mask);
		sa.sa_flags = SA_RESTART;
		sigaction(SIGDANGER, &sa, NULL);
#  endif	/* _AIX */
# endif		/* HAVE_WORKING_FORK */
	}

# ifdef SCO5_CLOCK
	/*
	 * SCO OpenServer's system clock offers much more precise timekeeping
	 * on the base CPU than the other CPUs (for multiprocessor systems),
	 * so we must lock to the base CPU.
	 */
	fd = open("/dev/at1", O_RDONLY);		
	if (fd >= 0) {
		zero = 0;
		if (ioctl(fd, ACPU_LOCK, &zero) < 0)
			msyslog(LOG_ERR, "cannot lock to base CPU: %m");
		close(fd);
	}
# endif

	/* Setup stack size in preparation for locking pages in memory. */
# if defined(HAVE_MLOCKALL)
#  ifdef HAVE_SETRLIMIT
	ntp_rlimit(RLIMIT_STACK, DFLT_RLIMIT_STACK * 4096, 4096, "4k");
#   ifdef RLIMIT_MEMLOCK
	/*
	 * The default RLIMIT_MEMLOCK is very low on Linux systems.
	 * Unless we increase this limit malloc calls are likely to
	 * fail if we drop root privilege.  To be useful the value
	 * has to be larger than the largest ntpd resident set size.
	 */
	ntp_rlimit(RLIMIT_MEMLOCK, DFLT_RLIMIT_MEMLOCK * 1024 * 1024, 1024 * 1024, "MB");
#   endif	/* RLIMIT_MEMLOCK */
#  endif	/* HAVE_SETRLIMIT */
# else	/* !HAVE_MLOCKALL follows */
#  ifdef HAVE_PLOCK
#   ifdef PROCLOCK
#    ifdef _AIX
	/*
	 * set the stack limit for AIX for plock().
	 * see get_aix_stack() for more info.
	 */
	if (ulimit(SET_STACKLIM, (get_aix_stack() - 8 * 4096)) < 0)
		msyslog(LOG_ERR,
			"Cannot adjust stack limit for plock: %m");
#    endif	/* _AIX */
#   endif	/* PROCLOCK */
#  endif	/* HAVE_PLOCK */
# endif	/* !HAVE_MLOCKALL */

	/*
	 * Set up signals we pay attention to locally.
	 */
# ifdef SIGDIE1
	signal_no_reset(SIGDIE1, finish);
	signal_no_reset(SIGDIE2, finish);
	signal_no_reset(SIGDIE3, finish);
	signal_no_reset(SIGDIE4, finish);
# endif
# ifdef SIGBUS
	signal_no_reset(SIGBUS, finish);
# endif

# if !defined(SYS_WINNT) && !defined(VMS)
#  ifdef DEBUG
	(void) signal_no_reset(MOREDEBUGSIG, moredebug);
	(void) signal_no_reset(LESSDEBUGSIG, lessdebug);
#  else
	(void) signal_no_reset(MOREDEBUGSIG, no_debug);
	(void) signal_no_reset(LESSDEBUGSIG, no_debug);
#  endif	/* DEBUG */
# endif	/* !SYS_WINNT && !VMS */

	/*
	 * Set up signals we should never pay attention to.
	 */
# ifdef SIGPIPE
	signal_no_reset(SIGPIPE, SIG_IGN);
# endif

	/*
	 * Call the init_ routines to initialize the data structures.
	 *
	 * Exactly what command-line options are we expecting here?
	 */
	INIT_SSL();
	init_auth();
	init_util();
	init_restrict();
	init_mon();
	init_timer();
	init_request();
	init_control();
	init_peer();
# ifdef REFCLOCK
	init_refclock();
# endif
	set_process_priority();
	init_proto();		/* Call at high priority */
	init_io();
	init_loopfilter();
	mon_start(MON_ON);	/* monitor on by default now	  */
				/* turn off in config if unwanted */

	/*
	 * Get the configuration.  This is done in a separate module
	 * since this will definitely be different for the gizmo board.
	 */
	getconfig(argc, argv);

	if (-1 == cur_memlock) {
# if defined(HAVE_MLOCKALL)
		/*
		 * lock the process into memory
		 */
		if (   !HAVE_OPT(SAVECONFIGQUIT)
#  ifdef RLIMIT_MEMLOCK
		    && -1 != DFLT_RLIMIT_MEMLOCK
#  endif
		    && 0 != mlockall(MCL_CURRENT|MCL_FUTURE))
			msyslog(LOG_ERR, "mlockall(): %m");
# else	/* !HAVE_MLOCKALL follows */
#  ifdef HAVE_PLOCK
#   ifdef PROCLOCK
		/*
		 * lock the process into memory
		 */
		if (!HAVE_OPT(SAVECONFIGQUIT) && 0 != plock(PROCLOCK))
			msyslog(LOG_ERR, "plock(PROCLOCK): %m");
#   else	/* !PROCLOCK follows  */
#    ifdef TXTLOCK
		/*
		 * Lock text into ram
		 */
		if (!HAVE_OPT(SAVECONFIGQUIT) && 0 != plock(TXTLOCK))
			msyslog(LOG_ERR, "plock(TXTLOCK) error: %m");
#    else	/* !TXTLOCK follows */
		msyslog(LOG_ERR, "plock() - don't know what to lock!");
#    endif	/* !TXTLOCK */
#   endif	/* !PROCLOCK */
#  endif	/* HAVE_PLOCK */
# endif	/* !HAVE_MLOCKALL */
	}

	loop_config(LOOP_DRIFTINIT, 0);
	report_event(EVNT_SYSRESTART, NULL, NULL);
	initializing = FALSE;

# ifdef HAVE_DROPROOT
	if (droproot) {
		/* Drop super-user privileges and chroot now if the OS supports this */

#  ifdef HAVE_LINUX_CAPABILITIES
		/* set flag: keep privileges accross setuid() call (we only really need cap_sys_time): */
		if (prctl( PR_SET_KEEPCAPS, 1L, 0L, 0L, 0L ) == -1) {
			msyslog( LOG_ERR, "prctl( PR_SET_KEEPCAPS, 1L ) failed: %m" );
			exit(-1);
		}
#  elif HAVE_SOLARIS_PRIVS
		/* Nothing to do here */
#  else
		/* we need a user to switch to */
		if (user == NULL) {
			msyslog(LOG_ERR, "Need user name to drop root privileges (see -u flag!)" );
			exit(-1);
		}
#  endif	/* HAVE_LINUX_CAPABILITIES || HAVE_SOLARIS_PRIVS */

		if (user != NULL) {
			if (isdigit((unsigned char)*user)) {
				sw_uid = (uid_t)strtoul(user, &endp, 0);
				if (*endp != '\0')
					goto getuser;

				if ((pw = getpwuid(sw_uid)) != NULL) {
					free(user);
					user = estrdup(pw->pw_name);
					sw_gid = pw->pw_gid;
				} else {
					errno = 0;
					msyslog(LOG_ERR, "Cannot find user ID %s", user);
					exit (-1);
				}

			} else {
getuser:
				errno = 0;
				if ((pw = getpwnam(user)) != NULL) {
					sw_uid = pw->pw_uid;
					sw_gid = pw->pw_gid;
				} else {
					if (errno)
						msyslog(LOG_ERR, "getpwnam(%s) failed: %m", user);
					else
						msyslog(LOG_ERR, "Cannot find user `%s'", user);
					exit (-1);
				}
			}
		}
		if (group != NULL) {
			if (isdigit((unsigned char)*group)) {
				sw_gid = (gid_t)strtoul(group, &endp, 0);
				if (*endp != '\0')
					goto getgroup;
			} else {
getgroup:
				if ((gr = getgrnam(group)) != NULL) {
					sw_gid = gr->gr_gid;
				} else {
					errno = 0;
					msyslog(LOG_ERR, "Cannot find group `%s'", group);
					exit (-1);
				}
			}
		}

		if (chrootdir ) {
			/* make sure cwd is inside the jail: */
			if (chdir(chrootdir)) {
				msyslog(LOG_ERR, "Cannot chdir() to `%s': %m", chrootdir);
				exit (-1);
			}
			if (chroot(chrootdir)) {
				msyslog(LOG_ERR, "Cannot chroot() to `%s': %m", chrootdir);
				exit (-1);
			}
			if (chdir("/")) {
				msyslog(LOG_ERR, "Cannot chdir() to`root after chroot(): %m");
				exit (-1);
			}
		}
#  ifdef HAVE_SOLARIS_PRIVS
		if ((lowprivs = priv_str_to_set(LOWPRIVS, ",", NULL)) == NULL) {
			msyslog(LOG_ERR, "priv_str_to_set() failed:%m");
			exit(-1);
		}
		if ((highprivs = priv_allocset()) == NULL) {
			msyslog(LOG_ERR, "priv_allocset() failed:%m");
			exit(-1);
		}
		(void) getppriv(PRIV_PERMITTED, highprivs);
		(void) priv_intersect(highprivs, lowprivs);
		if (setppriv(PRIV_SET, PRIV_PERMITTED, lowprivs) == -1) {
			msyslog(LOG_ERR, "setppriv() failed:%m");
			exit(-1);
		}
#  endif /* HAVE_SOLARIS_PRIVS */
		if (user && initgroups(user, sw_gid)) {
			msyslog(LOG_ERR, "Cannot initgroups() to user `%s': %m", user);
			exit (-1);
		}
		if (group && setgid(sw_gid)) {
			msyslog(LOG_ERR, "Cannot setgid() to group `%s': %m", group);
			exit (-1);
		}
		if (group && setegid(sw_gid)) {
			msyslog(LOG_ERR, "Cannot setegid() to group `%s': %m", group);
			exit (-1);
		}
		if (group) {
			if (0 != setgroups(1, &sw_gid)) {
				msyslog(LOG_ERR, "setgroups(1, %d) failed: %m", sw_gid);
				exit (-1);
			}
		}
		else if (pw)
			if (0 != initgroups(pw->pw_name, pw->pw_gid)) {
				msyslog(LOG_ERR, "initgroups(<%s>, %d) filed: %m", pw->pw_name, pw->pw_gid);
				exit (-1);
			}
		if (user && setuid(sw_uid)) {
			msyslog(LOG_ERR, "Cannot setuid() to user `%s': %m", user);
			exit (-1);
		}
		if (user && seteuid(sw_uid)) {
			msyslog(LOG_ERR, "Cannot seteuid() to user `%s': %m", user);
			exit (-1);
		}

#  if !defined(HAVE_LINUX_CAPABILITIES) && !defined(HAVE_SOLARIS_PRIVS)
		/*
		 * for now assume that the privilege to bind to privileged ports
		 * is associated with running with uid 0 - should be refined on
		 * ports that allow binding to NTP_PORT with uid != 0
		 */
		disable_dynamic_updates |= (sw_uid != 0);  /* also notifies routing message listener */
#  endif /* !HAVE_LINUX_CAPABILITIES && !HAVE_SOLARIS_PRIVS */

		if (disable_dynamic_updates && interface_interval) {
			interface_interval = 0;
			msyslog(LOG_INFO, "running as non-root disables dynamic interface tracking");
		}

#  ifdef HAVE_LINUX_CAPABILITIES
		{
			/*
			 *  We may be running under non-root uid now, but we still hold full root privileges!
			 *  We drop all of them, except for the crucial one or two: cap_sys_time and
			 *  cap_net_bind_service if doing dynamic interface tracking.
			 */
			cap_t caps;
			char *captext;
			
			captext = (0 != interface_interval)
				      ? "cap_sys_time,cap_net_bind_service=pe"
				      : "cap_sys_time=pe";
			caps = cap_from_text(captext);
			if (!caps) {
				msyslog(LOG_ERR,
					"cap_from_text(%s) failed: %m",
					captext);
				exit(-1);
			}
			if (-1 == cap_set_proc(caps)) {
				msyslog(LOG_ERR,
					"cap_set_proc() failed to drop root privs: %m");
				exit(-1);
			}
			cap_free(caps);
		}
#  endif	/* HAVE_LINUX_CAPABILITIES */
#  ifdef HAVE_SOLARIS_PRIVS
		if (priv_delset(lowprivs, "proc_setid") == -1) {
			msyslog(LOG_ERR, "priv_delset() failed:%m");
			exit(-1);
		}
		if (setppriv(PRIV_SET, PRIV_PERMITTED, lowprivs) == -1) {
			msyslog(LOG_ERR, "setppriv() failed:%m");
			exit(-1);
		}
		priv_freeset(lowprivs);
		priv_freeset(highprivs);
#  endif /* HAVE_SOLARIS_PRIVS */
		root_dropped = TRUE;
		fork_deferred_worker();
	}	/* if (droproot) */
# endif	/* HAVE_DROPROOT */

/* libssecomp sandboxing */
#if defined (LIBSECCOMP) && (KERN_SECCOMP)
	scmp_filter_ctx ctx;

	if ((ctx = seccomp_init(SCMP_ACT_KILL)) < 0)
		msyslog(LOG_ERR, "%s: seccomp_init(SCMP_ACT_KILL) failed: %m", __func__);
	else {
		msyslog(LOG_DEBUG, "%s: seccomp_init(SCMP_ACT_KILL) succeeded", __func__);
	}

#ifdef __x86_64__
int scmp_sc[] = {
	SCMP_SYS(adjtimex),
	SCMP_SYS(bind),
	SCMP_SYS(brk),
	SCMP_SYS(chdir),
	SCMP_SYS(clock_gettime),
	SCMP_SYS(clock_settime),
	SCMP_SYS(close),
	SCMP_SYS(connect),
	SCMP_SYS(exit_group),
	SCMP_SYS(fstat),
	SCMP_SYS(fsync),
	SCMP_SYS(futex),
	SCMP_SYS(getitimer),
	SCMP_SYS(getsockname),
	SCMP_SYS(ioctl),
	SCMP_SYS(lseek),
	SCMP_SYS(madvise),
	SCMP_SYS(mmap),
	SCMP_SYS(munmap),
	SCMP_SYS(open),
	SCMP_SYS(poll),
	SCMP_SYS(read),
	SCMP_SYS(recvmsg),
	SCMP_SYS(rename),
	SCMP_SYS(rt_sigaction),
	SCMP_SYS(rt_sigprocmask),
	SCMP_SYS(rt_sigreturn),
	SCMP_SYS(select),
	SCMP_SYS(sendto),
	SCMP_SYS(setitimer),
	SCMP_SYS(setsid),
	SCMP_SYS(socket),
	SCMP_SYS(stat),
	SCMP_SYS(time),
	SCMP_SYS(write),
};
#endif
#ifdef __i386__
int scmp_sc[] = {
	SCMP_SYS(_newselect),
	SCMP_SYS(adjtimex),
	SCMP_SYS(brk),
	SCMP_SYS(chdir),
	SCMP_SYS(clock_gettime),
	SCMP_SYS(clock_settime),
	SCMP_SYS(close),
	SCMP_SYS(exit_group),
	SCMP_SYS(fsync),
	SCMP_SYS(futex),
	SCMP_SYS(getitimer),
	SCMP_SYS(madvise),
	SCMP_SYS(mmap),
	SCMP_SYS(mmap2),
	SCMP_SYS(munmap),
	SCMP_SYS(open),
	SCMP_SYS(poll),
	SCMP_SYS(read),
	SCMP_SYS(rename),
	SCMP_SYS(rt_sigaction),
	SCMP_SYS(rt_sigprocmask),
	SCMP_SYS(select),
	SCMP_SYS(setitimer),
	SCMP_SYS(setsid),
	SCMP_SYS(sigprocmask),
	SCMP_SYS(sigreturn),
	SCMP_SYS(socketcall),
	SCMP_SYS(stat64),
	SCMP_SYS(time),
	SCMP_SYS(write),
};
#endif
	{
		int i;

		for (i = 0; i < COUNTOF(scmp_sc); i++) {
			if (seccomp_rule_add(ctx,
			    SCMP_ACT_ALLOW, scmp_sc[i], 0) < 0) {
				msyslog(LOG_ERR,
				    "%s: seccomp_rule_add() failed: %m",
				    __func__);
			}
		}
	}

	if (seccomp_load(ctx) < 0)
		msyslog(LOG_ERR, "%s: seccomp_load() failed: %m",
		    __func__);	
	else {
		msyslog(LOG_DEBUG, "%s: seccomp_load() succeeded", __func__);
	}
#endif /* LIBSECCOMP and KERN_SECCOMP */

# ifdef HAVE_IO_COMPLETION_PORT

	for (;;) {
		GetReceivedBuffers();
# else /* normal I/O */

	BLOCK_IO_AND_ALARM();
	was_alarmed = FALSE;

	for (;;) {
		if (alarm_flag) {	/* alarmed? */
			was_alarmed = TRUE;
			alarm_flag = FALSE;
		}

		if (!was_alarmed && !has_full_recv_buffer()) {
			/*
			 * Nothing to do.  Wait for something.
			 */
			io_handler();
		}

		if (alarm_flag) {	/* alarmed? */
			was_alarmed = TRUE;
			alarm_flag = FALSE;
		}

		if (was_alarmed) {
			UNBLOCK_IO_AND_ALARM();
			/*
			 * Out here, signals are unblocked.  Call timer routine
			 * to process expiry.
			 */
			timer();
			was_alarmed = FALSE;
			BLOCK_IO_AND_ALARM();
		}

# endif		/* !HAVE_IO_COMPLETION_PORT */

# ifdef DEBUG_TIMING
		{
			l_fp pts;
			l_fp tsa, tsb;
			int bufcount = 0;

			get_systime(&pts);
			tsa = pts;
# endif
			rbuf = get_full_recv_buffer();
			while (rbuf != NULL) {
				if (alarm_flag) {
					was_alarmed = TRUE;
					alarm_flag = FALSE;
				}
				UNBLOCK_IO_AND_ALARM();

				if (was_alarmed) {
					/* avoid timer starvation during lengthy I/O handling */
					timer();
					was_alarmed = FALSE;
				}

				/*
				 * Call the data procedure to handle each received
				 * packet.
				 */
				if (rbuf->receiver != NULL) {
# ifdef DEBUG_TIMING
					l_fp dts = pts;

					L_SUB(&dts, &rbuf->recv_time);
					DPRINTF(2, ("processing timestamp delta %s (with prec. fuzz)\n", lfptoa(&dts, 9)));
					collect_timing(rbuf, "buffer processing delay", 1, &dts);
					bufcount++;
# endif
					(*rbuf->receiver)(rbuf);
				} else {
					msyslog(LOG_ERR, "fatal: receive buffer callback NULL");
					abort();
				}

				BLOCK_IO_AND_ALARM();
				freerecvbuf(rbuf);
				rbuf = get_full_recv_buffer();
			}
# ifdef DEBUG_TIMING
			get_systime(&tsb);
			L_SUB(&tsb, &tsa);
			if (bufcount) {
				collect_timing(NULL, "processing", bufcount, &tsb);
				DPRINTF(2, ("processing time for %d buffers %s\n", bufcount, lfptoa(&tsb, 9)));
			}
		}
# endif

		/*
		 * Go around again
		 */

# ifdef HAVE_DNSREGISTRATION
		if (mdnsreg && (current_time - mdnsreg ) > 60 && mdnstries && sys_leap != LEAP_NOTINSYNC) {
			mdnsreg = current_time;
			msyslog(LOG_INFO, "Attempting to register mDNS");
			if ( DNSServiceRegister (&mdns, 0, 0, NULL, "_ntp._udp", NULL, NULL, 
			    htons(NTP_PORT), 0, NULL, NULL, NULL) != kDNSServiceErr_NoError ) {
				if (!--mdnstries) {
					msyslog(LOG_ERR, "Unable to register mDNS, giving up.");
				} else {	
					msyslog(LOG_INFO, "Unable to register mDNS, will try later.");
				}
			} else {
				msyslog(LOG_INFO, "mDNS service registered.");
				mdnsreg = FALSE;
			}
		}
# endif /* HAVE_DNSREGISTRATION */

	}
	UNBLOCK_IO_AND_ALARM();
	return 1;
}
#endif	/* !SIM */


#if !defined(SIM) && defined(SIGDIE1)
/*
 * finish - exit gracefully
 */
static RETSIGTYPE
finish(
	int sig
	)
{
	const char *sig_desc;

	sig_desc = NULL;
#ifdef HAVE_STRSIGNAL
	sig_desc = strsignal(sig);
#endif
	if (sig_desc == NULL)
		sig_desc = "";
	msyslog(LOG_NOTICE, "%s exiting on signal %d (%s)", progname,
		sig, sig_desc);
	/* See Bug 2513 and Bug 2522 re the unlink of PIDFILE */
# ifdef HAVE_DNSREGISTRATION
	if (mdns != NULL)
		DNSServiceRefDeallocate(mdns);
# endif
	peer_cleanup();
	exit(0);
}
#endif	/* !SIM && SIGDIE1 */


#ifndef SIM
/*
 * wait_child_sync_if - implements parent side of -w/--wait-sync
 */
# ifdef HAVE_WORKING_FORK
static int
wait_child_sync_if(
	int	pipe_read_fd,
	long	wait_sync
	)
{
	int	rc;
	int	exit_code;
	time_t	wait_end_time;
	time_t	cur_time;
	time_t	wait_rem;
	fd_set	readset;
	struct timeval wtimeout;

	if (0 == wait_sync) 
		return 0;

	/* waitsync_fd_to_close used solely by child */
	close(waitsync_fd_to_close);
	wait_end_time = time(NULL) + wait_sync;
	do {
		cur_time = time(NULL);
		wait_rem = (wait_end_time > cur_time)
				? (wait_end_time - cur_time)
				: 0;
		wtimeout.tv_sec = wait_rem;
		wtimeout.tv_usec = 0;
		FD_ZERO(&readset);
		FD_SET(pipe_read_fd, &readset);
		rc = select(pipe_read_fd + 1, &readset, NULL, NULL,
			    &wtimeout);
		if (-1 == rc) {
			if (EINTR == errno)
				continue;
			exit_code = (errno) ? errno : -1;
			msyslog(LOG_ERR,
				"--wait-sync select failed: %m");
			return exit_code;
		}
		if (0 == rc) {
			/*
			 * select() indicated a timeout, but in case
			 * its timeouts are affected by a step of the
			 * system clock, select() again with a zero 
			 * timeout to confirm.
			 */
			FD_ZERO(&readset);
			FD_SET(pipe_read_fd, &readset);
			wtimeout.tv_sec = 0;
			wtimeout.tv_usec = 0;
			rc = select(pipe_read_fd + 1, &readset, NULL,
				    NULL, &wtimeout);
			if (0 == rc)	/* select() timeout */
				break;
			else		/* readable */
				return 0;
		} else			/* readable */
			return 0;
	} while (wait_rem > 0);

	fprintf(stderr, "%s: -w/--wait-sync %ld timed out.\n",
		progname, wait_sync);
	return ETIMEDOUT;
}
Exemple #12
0
/*
 * authreadkeys - (re)read keys from a file.
 */
int
authreadkeys(
	const char *file
	)
{
	FILE	*fp;
	char	*line;
	char	*token;
	keyid_t	keyno;
	int	keytype;
	char	buf[512];		/* lots of room for line */
	u_char	keystr[20];
	size_t	len;
	size_t	j;

	/*
	 * Open file.  Complain and return if it can't be opened.
	 */
	fp = fopen(file, "r");
	if (fp == NULL) {
		msyslog(LOG_ERR, "authreadkeys: file %s: %m",
		    file);
		return (0);
	}
	INIT_SSL();

	/*
	 * Remove all existing keys
	 */
	auth_delkeys();

	/*
	 * Now read lines from the file, looking for key entries
	 */
	while ((line = fgets(buf, sizeof buf, fp)) != NULL) {
		token = nexttok(&line);
		if (token == NULL)
			continue;
		
		/*
		 * First is key number.  See if it is okay.
		 */
		keyno = atoi(token);
		if (keyno == 0) {
			msyslog(LOG_ERR,
			    "authreadkeys: cannot change key %s", token);
			continue;
		}

		if (keyno > NTP_MAXKEY) {
			msyslog(LOG_ERR,
			    "authreadkeys: key %s > %d reserved for Autokey",
			    token, NTP_MAXKEY);
			continue;
		}

		/*
		 * Next is keytype. See if that is all right.
		 */
		token = nexttok(&line);
		if (token == NULL) {
			msyslog(LOG_ERR,
			    "authreadkeys: no key type for key %d", keyno);
			continue;
		}
#ifdef OPENSSL
		/*
		 * The key type is the NID used by the message digest 
		 * algorithm. There are a number of inconsistencies in
		 * the OpenSSL database. We attempt to discover them
		 * here and prevent use of inconsistent data later.
		 */
		keytype = keytype_from_text(token, NULL);
		if (keytype == 0) {
			msyslog(LOG_ERR,
			    "authreadkeys: invalid type for key %d", keyno);
			continue;
		}
		if (EVP_get_digestbynid(keytype) == NULL) {
			msyslog(LOG_ERR,
			    "authreadkeys: no algorithm for key %d", keyno);
			continue;
		}
#else	/* !OPENSSL follows */

		/*
		 * The key type is unused, but is required to be 'M' or
		 * 'm' for compatibility.
		 */
		if (!(*token == 'M' || *token == 'm')) {
			msyslog(LOG_ERR,
			    "authreadkeys: invalid type for key %d", keyno);
			continue;
		}
		keytype = KEY_TYPE_MD5;
#endif	/* !OPENSSL */

		/*
		 * Finally, get key and insert it. If it is longer than 20
		 * characters, it is a binary string encoded in hex;
		 * otherwise, it is a text string of printable ASCII
		 * characters.
		 */
		token = nexttok(&line);
		if (token == NULL) {
			msyslog(LOG_ERR,
			    "authreadkeys: no key for key %d", keyno);
			continue;
		}
		len = strlen(token);
		if (len <= sizeof(keystr)) {
			MD5auth_setkey(keyno, keytype, (u_char *)token, len);
		} else {
			char	hex[] = "0123456789abcdef";
			u_char	temp;
			char	*ptr;
			size_t	jlim;

			jlim = min(len, 2 * sizeof(keystr));
			for (j = 0; j < jlim; j++) {
				ptr = strchr(hex, tolower((unsigned char)token[j]));
				if (ptr == NULL)
					break;	/* abort decoding */
				temp = (u_char)(ptr - hex);
				if (j & 1)
					keystr[j / 2] |= temp;
				else
					keystr[j / 2] = temp << 4;
			}
			if (j < jlim) {
				msyslog(LOG_ERR,
					"authreadkeys: invalid hex digit for key %d", keyno);
				continue;
			}
			MD5auth_setkey(keyno, keytype, keystr, jlim / 2);
		}
	}
	fclose(fp);
	return (1);
}