void main(void)
{
/* Turn off the watchdog timer */
WDTCTL = WDTPW + WDTHOLD;
/* clear reason for reset */
SYSRSTIV = 0;
/* disable DMA during read-modify-write cycles */
DMACTL4 = DMARMWDIS;
unsigned char MspVersion = GetMsp430HardwareRevision();
InitializeCalibrationData();
ConfigureHardware();
OsalNvInit(0);
InitializeDebugFlags();
InitializeButtons();
InitializeVibration();
InitializeOneSecondTimers();
InitializeBufferPool();
InitializeSppTask();
InitializeRealTimeClock();
InitializeBackgroundTask();
InitializeDisplayTask();
InitializeAdc();
#if 0
/* timeout is 16 seconds */
hal_SetWatchdogTimeout(16);
#endif
#ifdef CHECK_FOR_PMM15
/* make sure error pmm15 does not exist */
while ( PMM15Check() );
#endif
/* Errata PMM17 - automatic prolongation mechanism
* SVSLOW is disabled
*/
*(unsigned int*)(0x0110) = 0x9602;
*(unsigned int*)(0x0112) |= 0x0800;
PrintString("Starting Task Scheduler\r\n");
vTaskStartScheduler();
/* if vTaskStartScheduler exits an error occured. */
PrintString("Program Error\r\n");
ForceWatchdogReset();
}
void main(void)
{
ENABLE_LCD_LED();
#if ENABLE_WATCHDOG
RestartWatchdog();
#else
WDTCTL = WDTPW + WDTHOLD;
#endif
/* clear shipping mode, if set to allow configuration */
PMMCTL0_H = PMMPW_H;
PM5CTL0 &= ~LOCKLPM5;
/* disable DMA during read-modify-write cycles */
DMACTL4 = DMARMWDIS;
DetermineErrata();
#ifdef BOOTLOADER
/*
* enable RAM alternate interrupt vectors
* these are defined in AltVect.s43 and copied to RAM by cstartup
*/
SYSCTL |= SYSRIVECT;
ClearBootloaderSignature();
#endif
/* calibration data is used for clock setup */
InitializeCalibrationData();
#ifndef BOOTLOADER
SaveResetSource();
#endif
SetupClockAndPowerManagementModule();
OsalNvInit(0);
/* change the mux settings according to presense of the charging clip */
InitializeMuxMode();
ChangeMuxMode();
InitDebugUart();
TestModeControl();
/* adc is required to get the board configuration */
InitializeAdc();
ConfigureDefaultIO(GetBoardConfiguration());
InitializeDebugFlags();
// InitButton();
InitializeVibration();
InitializeOneSecondTimers();
InitializeBufferPool();
InitializeWrapperTask();
InitializeRealTimeClock();
InitializeDisplayTask();
DISABLE_LCD_LED();
#if CHECK_FOR_PMM15
/* make sure error pmm15 does not exist */
while ( PMM15Check() );
#endif
/* Errata PMM17 - automatic prolongation mechanism
* SVSLOW is disabled
*/
*(unsigned int*)(0x0110) = 0x9602;
*(unsigned int*)(0x0112) |= 0x0800;
WhoAmI();
PrintResetSource();
/* if a watchdog occurred then print and save information about the source */
WatchdogTimeoutHandler(GetResetSource());
PrintString("Starting Task Scheduler\r\n");
SetUartNormalMode();
vTaskStartScheduler();
/* if vTaskStartScheduler exits an error occured. */
PrintString("Program Error\r\n");
ForceWatchdogReset();
}
void main(void)
{
/* Turn off the watchdog timer */
WDTCTL = WDTPW + WDTHOLD;
/* clear reason for reset */
SYSRSTIV = 0;
/* disable DMA during read-modify-write cycles */
DMACTL4 = DMARMWDIS;
InitializeCalibrationData();
ConfigureHardware();
osal_nv_init(0);
InitializeDebugFlags();
InitializeBufferPool();
InitializeSppTask();
InitializeCommandTask();
InitializeRealTimeClock();
InitializeBackgroundTask();
InitializeDisplayTask();
InitializeAdc();
#ifdef DIGITAL
InitializeSerialRamTask();
InitializeLcdTask();
#else
unsigned char QueueOfZeroLength = 0;
QueueHandles[SRAM_QINDEX] =
xQueueCreate( QueueOfZeroLength, MESSAGE_QUEUE_ITEM_SIZE );
QueueHandles[LCD_TASK_QINDEX] =
xQueueCreate( QueueOfZeroLength, MESSAGE_QUEUE_ITEM_SIZE );
#endif
#if 0
InitializePedometerTask();
#endif
#if 0
/* timeout is 16 seconds */
hal_SetWatchdogTimeout(16);
#endif
extern xSemaphoreHandle CrcMutex;
CrcMutex = xSemaphoreCreateMutex();
xSemaphoreGive(CrcMutex);
#if 0
SetSniffSlotParameter(MaxInterval, 8);
SetSniffSlotParameter(MinInterval, 6);
SetSniffModeEntryDelay(200);
#endif
/* Start the Task Scheduler. */
vTaskStartScheduler();
/* if vTaskStartScheduler exits an error occured. */
PrintString("Program Error\r\n");
}
/* The value in RAM must be updated if the phone writes the value in
* flash (until the code is changed to read the value from flash)
*/
static void NvUpdater(unsigned int NvId)
{
switch (NvId)
{
#ifdef DIGITAL
case NVID_IDLE_BUFFER_CONFIGURATION:
InitializeIdleBufferConfig();
break;
case NVID_IDLE_BUFFER_INVERT:
InitializeIdleBufferInvert();
break;
#endif
case NVID_IDLE_MODE_TIMEOUT:
case NVID_APPLICATION_MODE_TIMEOUT:
case NVID_NOTIFICATION_MODE_TIMEOUT:
case NVID_RESERVED_MODE_TIMEOUT:
InitializeModeTimeouts();
break;
#ifdef ANALOG
case NVID_IDLE_DISPLAY_TIMEOUT:
case NVID_APPLICATION_DISPLAY_TIMEOUT:
case NVID_NOTIFICATION_DISPLAY_TIMEOUT:
case NVID_RESERVED_DISPLAY_TIMEOUT:
InitializeDisplayTimeouts();
break;
#endif
case NVID_SNIFF_DEBUG:
case NVID_BATTERY_DEBUG:
case NVID_CONNECTION_DEBUG:
InitializeDebugFlags();
break;
case NVID_RSTNMI_CONFIGURATION:
InitializeRstNmiConfiguration();
break;
case NVID_MASTER_RESET:
/* this gets handled on reset */
break;
case NVID_LOW_BATTERY_WARNING_LEVEL:
case NVID_LOW_BATTERY_BTOFF_LEVEL:
InitializeLowBatteryLevels();
break;
case NVID_BATTERY_SENSE_INTERVAL:
InitializeBatteryMonitorInterval();
break;
case NVID_LIGHT_SENSE_INTERVAL:
break;
case NVID_SECURE_SIMPLE_PAIRING_ENABLE:
/* not for phone control - reset watch */
break;
case NVID_LINK_ALARM_ENABLE:
InitializeLinkAlarmEnable();
break;
case NVID_LINK_ALARM_DURATION:
break;
case NVID_PAIRING_MODE_DURATION:
/* not for phone control - reset watch */
break;
case NVID_TIME_FORMAT:
InitializeTimeFormat();
break;
case NVID_DATE_FORMAT:
InitializeDateFormat();
break;
#ifdef DIGITAL
case NVID_DISPLAY_SECONDS:
InitializeDisplaySeconds();
break;
#endif
#ifdef ANALOG
case NVID_TOP_OLED_CONTRAST_DAY:
case NVID_BOTTOM_OLED_CONTRAST_DAY:
case NVID_TOP_OLED_CONTRAST_NIGHT:
case NVID_BOTTOM_OLED_CONTRAST_NIGHT:
InitializeContrastValues();
break;
#endif
}
}
