void WinEDA_PcbFrame::Process_Special_Functions(wxCommandEvent& event)
/*********************************************************************/
/* Traite les selections d'outils et les commandes appelees du menu POPUP
*/
{
int id = event.GetId();
wxPoint pos;
wxClientDC dc(DrawPanel);
int itmp;
DrawPanel->PrepareGraphicContext(&dc);
wxGetMousePosition(&pos.x, &pos.y);
pos.y += 20;
switch ( id ) // Arret eventuel de la commande de déplacement en cours
{
case wxID_CUT:
case wxID_COPY:
case ID_AUX_TOOLBAR_PCB_TRACK_WIDTH:
case ID_AUX_TOOLBAR_PCB_VIA_SIZE:
case ID_ON_GRID_SELECT:
case ID_ON_ZOOM_SELECT:
case ID_PCB_USER_GRID_SETUP:
case ID_TOOLBARH_PCB_SELECT_LAYER:
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
case ID_POPUP_PCB_EDIT_TEXTEPCB:
case ID_POPUP_PCB_EDIT_MIRE:
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
case ID_POPUP_PCB_CHANGE_SIDE_MODULE:
case ID_POPUP_PCB_EDIT_MODULE:
case ID_POPUP_PCB_EDIT_TEXTMODULE:
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
case ID_POPUP_PCB_END_TRACK:
case ID_POPUP_PCB_PLACE_VIA:
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE:
case ID_POPUP_PCB_DELETE_EDGE_ZONE:
case ID_POPUP_PCB_DELETE_ZONE_LIMIT:
case ID_POPUP_PCB_EDIT_ZONE:
case ID_POPUP_PCB_DELETE_ZONE:
case ID_POPUP_PCB_DELETE_TRACKSEG:
case ID_POPUP_PCB_DELETE_TRACK:
case ID_POPUP_PCB_DELETE_TRACKNET:
case ID_POPUP_PCB_FILL_ZONE:
case ID_POPUP_PCB_SELECT_NET_ZONE:
case ID_POPUP_PCB_SELECT_LAYER:
case ID_POPUP_PCB_SELECT_CU_LAYER:
case ID_POPUP_PCB_SELECT_LAYER_PAIR:
case ID_POPUP_PCB_SELECT_NO_CU_LAYER:
case ID_POPUP_PCB_SELECT_WIDTH:
case ID_POPUP_PCB_SELECT_WIDTH1:
case ID_POPUP_PCB_SELECT_WIDTH2:
case ID_POPUP_PCB_SELECT_WIDTH3:
case ID_POPUP_PCB_SELECT_WIDTH4:
case ID_POPUP_PCB_SELECT_WIDTH5:
case ID_POPUP_PCB_SELECT_WIDTH6:
case ID_POPUP_PCB_SELECT_WIDTH7:
case ID_POPUP_PCB_SELECT_WIDTH8:
case ID_POPUP_PCB_SELECT_VIASIZE:
case ID_POPUP_PCB_SELECT_VIASIZE1:
case ID_POPUP_PCB_SELECT_VIASIZE2:
case ID_POPUP_PCB_SELECT_VIASIZE3:
case ID_POPUP_PCB_SELECT_VIASIZE4:
case ID_POPUP_PCB_SELECT_VIASIZE5:
case ID_POPUP_PCB_SELECT_VIASIZE6:
case ID_POPUP_PCB_SELECT_VIASIZE7:
case ID_POPUP_PCB_SELECT_VIASIZE8:
case ID_POPUP_PCB_MOVE_TRACK_NODE:
case ID_POPUP_PCB_PLACE_MOVED_TRACK_NODE:
case ID_POPUP_PCB_BREAK_TRACK:
case ID_POPUP_PCB_EDIT_NET:
case ID_POPUP_PCB_EDIT_TRACK:
case ID_POPUP_PCB_EDIT_TRACKSEG:
case ID_POPUP_PCB_LOCK_ON_TRACKSEG:
case ID_POPUP_PCB_LOCK_OFF_TRACKSEG:
case ID_POPUP_PCB_LOCK_ON_TRACK:
case ID_POPUP_PCB_LOCK_OFF_TRACK:
case ID_POPUP_PCB_LOCK_ON_NET:
case ID_POPUP_PCB_LOCK_OFF_NET:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_INVERT_BLOCK:
case ID_POPUP_ROTATE_BLOCK:
case ID_POPUP_COPY_BLOCK:
case ID_POPUP_PCB_VIA_EDITING:
case ID_POPUP_PCB_VIA_HOLE_TO_DEFAULT:
case ID_POPUP_PCB_VIA_HOLE_TO_VALUE:
case ID_POPUP_PCB_VIA_HOLE_ENTER_VALUE:
case ID_POPUP_PCB_VIA_HOLE_EXPORT:
case ID_POPUP_PCB_VIA_HOLE_RESET_TO_DEFAULT:
case ID_POPUP_PCB_VIA_HOLE_EXPORT_TO_OTHERS:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
if( GetScreen()->ManageCurseur &&
GetScreen()->ForceCloseManageCurseur )
{
GetScreen()->ForceCloseManageCurseur(this, &dc);
}
/* ne devrait pas etre execute, sauf bug */
if (m_CurrentScreen->BlockLocate.m_Command != BLOCK_IDLE)
{
m_CurrentScreen->BlockLocate.m_Command = BLOCK_IDLE;
m_CurrentScreen->BlockLocate.m_State = STATE_NO_BLOCK;
m_CurrentScreen->BlockLocate.m_BlockDrawStruct = NULL;
}
if (m_ID_current_state == 0 )
SetToolID(0, wxCURSOR_ARROW,wxEmptyString);
else SetCursor(DrawPanel->m_PanelCursor = DrawPanel->m_PanelDefaultCursor);
break;
default: // Arret de la commande de déplacement en cours
if( GetScreen()->ManageCurseur &&
GetScreen()->ForceCloseManageCurseur )
{
GetScreen()->ForceCloseManageCurseur(this, &dc);
}
SetToolID(0, wxCURSOR_ARROW,wxEmptyString);
break;
}
switch ( id ) // Traitement des commandes
{
case ID_EXIT :
Close(TRUE);
break;
case ID_OPEN_MODULE_EDITOR:
if (m_Parent->m_ModuleEditFrame == NULL )
{
m_Parent->m_ModuleEditFrame = new WinEDA_ModuleEditFrame(this,
m_Parent,_("Module Editor"),
wxPoint(-1, -1), wxSize(600,400) );
m_Parent->m_ModuleEditFrame->Show(TRUE);
m_Parent->m_ModuleEditFrame->Zoom_Automatique(TRUE);
}
else m_Parent->m_ModuleEditFrame->Iconize(FALSE);
break;
case ID_NEW_PROJECT:
case ID_LOAD_PROJECT:
Files_io(event);
break;
case ID_PCB_GLOBAL_DELETE:
InstallPcbGlobalDeleteFrame(pos);
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_MOVE;
DrawPanel->m_AutoPAN_Request = FALSE;
HandleBlockPlace(&dc);
break;
case ID_POPUP_COPY_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_COPY;
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
DrawPanel->m_AutoPAN_Request = FALSE;
HandleBlockPlace(&dc);
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_ZOOM;
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
HandleBlockEnd(&dc);
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_DELETE;
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
HandleBlockEnd(&dc);
break;
case ID_POPUP_ROTATE_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_ROTATE;
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
HandleBlockEnd(&dc);
break;
case ID_POPUP_INVERT_BLOCK:
GetScreen()->BlockLocate.m_Command = BLOCK_INVERT;
m_CurrentScreen->BlockLocate.SetMessageBlock(this);
HandleBlockEnd(&dc);
break;
case ID_UNDO_BUTT:
UnDeleteItem(&dc);
break;
case ID_DRC_CONTROL:
Install_Test_DRC_Frame(&dc);
break;
case ID_GET_NETLIST:
InstallNetlistFrame(&dc, wxPoint(-1,-1));
break;
case ID_GET_TOOLS:
// InstallToolsFrame(this, wxPoint(-1,-1) );
break;
case ID_FIND_ITEMS:
InstallFindFrame(pos, &dc);
break;
case ID_TRACK_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _("Add Tracks"));
DisplayTrackSettings();
if ( (m_Pcb->m_Status_Pcb & LISTE_CHEVELU_OK) == 0)
{
Compile_Ratsnest( &dc, TRUE );
}
break;
case ID_PCB_ZONES_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _("Add Zones"));
if ( ! DisplayOpt.DisplayZones )
DisplayInfo(this, _("Warning: Display Zone is OFF!!!") );
DelLimitesZone(&dc, TRUE);
if( ! g_HightLigt_Status && (g_HightLigth_NetCode > 0 ) )
Hight_Light(&dc);
break;
case ID_PCB_MIRE_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _("Add Mire"));
break;
case ID_PCB_PLACE_OFFSET_COORD_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _("Adjust Zero"));
break;
case ID_LINE_COMMENT_BUTT:
case ID_PCB_ARC_BUTT:
case ID_PCB_CIRCLE_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _("Add Graphic"));
break;
case ID_TEXT_COMMENT_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _("Add Text"));
break;
case ID_COMPONENT_BUTT:
SetToolID( id, wxCURSOR_HAND, _("Add Modules"));
break;
case ID_PCB_COTATION_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _("Add Cotation"));
break;
case ID_NO_SELECT_BUTT:
SetToolID( 0, wxCURSOR_ARROW, wxEmptyString);
break;
case ID_PCB_HIGHLIGHT_BUTT:
SetToolID( id, wxCURSOR_HAND, _("Net Highlight"));
break;
case ID_PCB_SHOW_1_RATSNEST_BUTT:
SetToolID( id, wxCURSOR_HAND, _("Local Ratsnest"));
if ( (m_Pcb->m_Status_Pcb & LISTE_CHEVELU_OK) == 0)
Compile_Ratsnest( &dc, TRUE );
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
SetToolID( 0, wxCURSOR_ARROW, wxEmptyString);
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_POPUP_END_LINE:
DrawPanel->MouseToCursorSchema();
// EndSegment(&dc);
break;
case ID_POPUP_PCB_EDIT_TRACK:
if ( CURRENT_ITEM == NULL) break;
Edit_Track_Width(&dc, (TRACK *) CURRENT_ITEM);
DrawPanel->MouseToCursorSchema();
GetScreen()->SetModify();
break;
case ID_POPUP_PCB_EDIT_TRACKSEG:
if ( CURRENT_ITEM == NULL) break;
Edit_TrackSegm_Width(&dc, (TRACK *) CURRENT_ITEM);
DrawPanel->MouseToCursorSchema();
GetScreen()->SetModify();
break;
case ID_POPUP_PCB_EDIT_NET:
if ( CURRENT_ITEM == NULL) break;
Edit_Net_Width(&dc, ((TRACK *) CURRENT_ITEM)->m_NetCode);
DrawPanel->MouseToCursorSchema();
GetScreen()->SetModify();
break;
case ID_POPUP_PCB_EDIT_ALL_VIAS_AND_TRACK_SIZE:
case ID_POPUP_PCB_EDIT_ALL_VIAS_SIZE:
case ID_POPUP_PCB_EDIT_ALL_TRACK_SIZE:
if ( CURRENT_ITEM == NULL) break;
{
bool resize_vias = TRUE, resize_track = TRUE;
if( id == ID_POPUP_PCB_EDIT_ALL_VIAS_SIZE) resize_track = FALSE;
if( id == ID_POPUP_PCB_EDIT_ALL_TRACK_SIZE) resize_vias = FALSE;
if ( Resize_Pistes_Vias(&dc, resize_track, resize_vias)) GetScreen()->SetModify();
}
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_END_TRACK:
DrawPanel->MouseToCursorSchema();
End_Route( (TRACK *) CURRENT_ITEM, &dc);
break;
case ID_POPUP_PCB_PLACE_MOVED_TRACK_NODE:
DrawPanel->MouseToCursorSchema();
if ( CURRENT_ITEM->m_Flags & IS_DRAGGED )
{
PlaceDraggedTrackSegment((TRACK *) CURRENT_ITEM, &dc);
}
break;
case ID_POPUP_PCB_PLACE_VIA:
DrawPanel->MouseToCursorSchema();
if ( CURRENT_ITEM->m_Flags & IS_DRAGGED )
{
PlaceDraggedTrackSegment((TRACK *) CURRENT_ITEM, &dc);
}
else
{
Other_Layer_Route( (TRACK *) CURRENT_ITEM, &dc);
if ( DisplayOpt.ContrastModeDisplay )
GetScreen()->SetRefreshReq();
}
break;
case ID_POPUP_PCB_DELETE_TRACKSEG:
DrawPanel->MouseToCursorSchema();
GetScreen()->m_CurrentItem = Delete_Segment(&dc, (TRACK*)CURRENT_ITEM);
GetScreen()->SetModify();
break;
case ID_POPUP_PCB_DELETE_TRACK:
DrawPanel->MouseToCursorSchema();
Delete_Track(&dc, (TRACK*)CURRENT_ITEM);
GetScreen()->m_CurrentItem = NULL;
GetScreen()->SetModify();
break;
case ID_POPUP_PCB_DELETE_TRACKNET:
DrawPanel->MouseToCursorSchema();
Delete_net(&dc, (TRACK*)CURRENT_ITEM);
GetScreen()->m_CurrentItem = NULL;
GetScreen()->SetModify();
break;
case ID_POPUP_PCB_LOCK_ON_TRACKSEG:
Attribut_Segment((TRACK*)CURRENT_ITEM, &dc, TRUE);
break;
case ID_POPUP_PCB_LOCK_OFF_TRACKSEG:
Attribut_Segment((TRACK*)CURRENT_ITEM, &dc, FALSE);
break;
case ID_POPUP_PCB_LOCK_ON_TRACK:
Attribut_Track((TRACK*)CURRENT_ITEM, &dc, TRUE);
break;
case ID_POPUP_PCB_LOCK_OFF_TRACK:
Attribut_Track((TRACK*)CURRENT_ITEM, &dc, FALSE);
break;
case ID_POPUP_PCB_LOCK_ON_NET:
Attribut_net(&dc, ((TRACK*)CURRENT_ITEM)->m_NetCode, TRUE);
break;
case ID_POPUP_PCB_LOCK_OFF_NET:
Attribut_net(&dc, ((TRACK*)CURRENT_ITEM)->m_NetCode, FALSE);
break;
case ID_POPUP_PCB_SETFLAGS_TRACK_MNU:
break;
case ID_POPUP_PCB_DELETE_ZONE:
DrawPanel->MouseToCursorSchema();
if ( CURRENT_ITEM == NULL) break;
Delete_Zone(&dc, (SEGZONE*)CURRENT_ITEM);
GetScreen()->m_CurrentItem = NULL;
break;
case ID_POPUP_PCB_EDIT_ZONE:
DrawPanel->MouseToCursorSchema();
if ( CURRENT_ITEM == NULL) break;
Edit_Zone_Width(&dc, (SEGZONE*)CURRENT_ITEM);
break;
case ID_POPUP_PCB_DELETE_ZONE_LIMIT:
DrawPanel->MouseToCursorSchema();
DelLimitesZone(&dc, TRUE);
break;
case ID_PCB_DELETE_ITEM_BUTT:
SetToolID( id, wxCURSOR_BULLSEYE, _("Delete item"));
break;
case ID_POPUP_PCB_MOVE_TEXTEPCB_REQUEST:
Process_Move_Item(this, CURRENT_ITEM, &dc);
DrawPanel->m_AutoPAN_Request = TRUE;
break;
case ID_POPUP_PCB_DRAG_MODULE_REQUEST:
g_Drag_Pistes_On = TRUE;
case ID_POPUP_PCB_MOVE_MODULE_REQUEST:
// If the current Item is a pad, text module ...: Get the parent
if ( CURRENT_ITEM->m_StructType != TYPEMODULE )
CURRENT_ITEM = (MODULE *) CURRENT_ITEM->m_Parent;
if ( !CURRENT_ITEM || CURRENT_ITEM->m_StructType != TYPEMODULE )
{
g_Drag_Pistes_On = FALSE;
break;
}
DrawPanel->MouseToCursorSchema();
StartMove_Module( (MODULE*)CURRENT_ITEM, &dc);
break;
case ID_POPUP_PCB_DELETE_MODULE:
DrawPanel->MouseToCursorSchema();
// If the current Item is a pad, text module ...: Get the parent
if ( CURRENT_ITEM->m_StructType != TYPEMODULE )
CURRENT_ITEM = (MODULE *) CURRENT_ITEM->m_Parent;
if ( !CURRENT_ITEM || CURRENT_ITEM->m_StructType != TYPEMODULE )
break;
if ( Delete_Module((MODULE*) CURRENT_ITEM, &dc) )
{
GetScreen()->m_CurrentItem = NULL;
}
break;
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
DrawPanel->MouseToCursorSchema();
// If the current Item is a pad, text module ...: Get the parent
if ( CURRENT_ITEM->m_StructType != TYPEMODULE )
CURRENT_ITEM = (MODULE *) CURRENT_ITEM->m_Parent;
if ( !CURRENT_ITEM || CURRENT_ITEM->m_StructType != TYPEMODULE )
break;
Rotate_Module(&dc, (MODULE*)CURRENT_ITEM, -900, TRUE);
break;
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
DrawPanel->MouseToCursorSchema();
// If the current Item is a pad, text module ...: Get the parent
if ( CURRENT_ITEM->m_StructType != TYPEMODULE )
CURRENT_ITEM = (MODULE *) CURRENT_ITEM->m_Parent;
if ( !CURRENT_ITEM || CURRENT_ITEM->m_StructType != TYPEMODULE )
break;
Rotate_Module(&dc, (MODULE*)CURRENT_ITEM, 900, TRUE);
break;
case ID_POPUP_PCB_CHANGE_SIDE_MODULE:
DrawPanel->MouseToCursorSchema();
// If the current Item is a pad, text module ...: Get the parent
if ( CURRENT_ITEM->m_StructType != TYPEMODULE )
CURRENT_ITEM = (MODULE *) CURRENT_ITEM->m_Parent;
if ( !CURRENT_ITEM || CURRENT_ITEM->m_StructType != TYPEMODULE )
break;
Change_Side_Module((MODULE *) CURRENT_ITEM, &dc);
break;
case ID_POPUP_PCB_EDIT_MODULE:
// If the current Item is a pad, text module ...: Get the parent
if ( CURRENT_ITEM->m_StructType != TYPEMODULE )
CURRENT_ITEM = (MODULE *) CURRENT_ITEM->m_Parent;
if ( !CURRENT_ITEM || CURRENT_ITEM->m_StructType != TYPEMODULE )
break;
InstallModuleOptionsFrame((MODULE *)CURRENT_ITEM,
&dc, pos);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_DRAG_PAD_REQUEST:
g_Drag_Pistes_On = TRUE;
case ID_POPUP_PCB_MOVE_PAD_REQUEST:
DrawPanel->MouseToCursorSchema();
StartMovePad((D_PAD *)CURRENT_ITEM, &dc);
break;
case ID_POPUP_PCB_EDIT_PAD:
InstallPadOptionsFrame((D_PAD *)CURRENT_ITEM,
&dc, pos);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
DrawPanel->MouseToCursorSchema();
Import_Pad_Settings((D_PAD *)CURRENT_ITEM, &dc);
break;
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
DrawPanel->MouseToCursorSchema();
Global_Import_Pad_Settings((D_PAD *)CURRENT_ITEM, &dc);
break;
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
DrawPanel->MouseToCursorSchema();
Export_Pad_Settings((D_PAD *)CURRENT_ITEM);
break;
case ID_POPUP_PCB_DELETE_PAD:
DeletePad((D_PAD *)CURRENT_ITEM, &dc);
GetScreen()->m_CurrentItem = NULL;
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_EDIT_TEXTMODULE:
InstallTextModOptionsFrame((TEXTE_MODULE *)CURRENT_ITEM,
&dc, pos);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
DrawPanel->MouseToCursorSchema();
StartMoveTexteModule( (TEXTE_MODULE *) CURRENT_ITEM,
&dc);
break;
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
RotateTextModule((TEXTE_MODULE *)CURRENT_ITEM,
&dc);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_DELETE_TEXTMODULE:
DeleteTextModule((TEXTE_MODULE *)CURRENT_ITEM,
&dc);
GetScreen()->m_CurrentItem = NULL;
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_SELECT_LAYER:
itmp = SelectLayer(GetScreen()->m_Active_Layer, -1, -1);
if ( itmp >= 0 ) GetScreen()->m_Active_Layer = itmp;
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_SELECT_NO_CU_LAYER:
itmp = SelectLayer(GetScreen()->m_Active_Layer, CMP_N+1, -1);
if ( itmp >= 0 ) GetScreen()->m_Active_Layer = itmp;
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_SELECT_CU_LAYER:
itmp = SelectLayer(GetScreen()->m_Active_Layer, -1, CMP_N);
if ( itmp >= 0 ) GetScreen()->m_Active_Layer = itmp;
break;
case ID_POPUP_PCB_SELECT_LAYER_PAIR:
SelectLayerPair();
DrawPanel->MouseToCursorSchema();
break;
case ID_TOOLBARH_PCB_SELECT_LAYER:
itmp = m_SelLayerBox->GetChoice();
GetScreen()->m_Active_Layer = (int)((size_t) m_SelLayerBox->GetClientData(itmp));
if ( DisplayOpt.ContrastModeDisplay ) DrawPanel->Refresh(TRUE);
break;
case ID_POPUP_PCB_EDIT_TEXTEPCB:
InstallTextPCBOptionsFrame((TEXTE_PCB *)CURRENT_ITEM,
&dc, pos);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
Rotate_Texte_Pcb((TEXTE_PCB *)CURRENT_ITEM, &dc);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_DELETE_TEXTEPCB:
Delete_Texte_Pcb((TEXTE_PCB *)CURRENT_ITEM, &dc);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_MOVE_MIRE_REQUEST:
StartMove_Mire((MIREPCB *)CURRENT_ITEM, &dc);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_EDIT_MIRE:
InstallMireOptionsFrame((MIREPCB *)CURRENT_ITEM, &dc, pos);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_DELETE_MIRE:
DrawPanel->MouseToCursorSchema();
Delete_Mire((MIREPCB *)CURRENT_ITEM, &dc);
GetScreen()->m_CurrentItem = NULL;
break;
case ID_POPUP_PCB_DELETE_COTATION:
DrawPanel->MouseToCursorSchema();
Delete_Cotation((COTATION*)CURRENT_ITEM, &dc);
GetScreen()->m_CurrentItem = NULL;
break;
case ID_POPUP_PCB_EDIT_COTATION:
Install_Edit_Cotation((COTATION*)CURRENT_ITEM, &dc, pos);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_DELETE_DRAWING:
Delete_Segment_Edge((DRAWSEGMENT *)CURRENT_ITEM, &dc);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_DELETE_DRAWING_LAYER:
Delete_Drawings_All_Layer((DRAWSEGMENT *)CURRENT_ITEM, &dc);
GetScreen()->m_CurrentItem = NULL;
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_EDIT_DRAWING:
Drawing_SetNewWidth((DRAWSEGMENT *)CURRENT_ITEM, &dc);
DrawPanel->MouseToCursorSchema();
break;
case ID_POPUP_PCB_MOVE_DRAWING_REQUEST:
DrawPanel->MouseToCursorSchema();
Start_Move_DrawItem((DRAWSEGMENT *)CURRENT_ITEM, &dc);
break;
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
DrawPanel->MouseToCursorSchema();
if ( CURRENT_ITEM && (CURRENT_ITEM->m_Flags & IS_NEW) )
{
End_Edge( (DRAWSEGMENT *)CURRENT_ITEM, &dc);
GetScreen()->m_CurrentItem = NULL;
}
break;
case ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE:
DrawPanel->MouseToCursorSchema();
if ( CURRENT_ITEM && (CURRENT_ITEM->m_Flags & IS_NEW) )
{
End_Zone(&dc);
GetScreen()->m_CurrentItem = NULL;
}
break;
case ID_POPUP_PCB_DELETE_EDGE_ZONE:
DrawPanel->MouseToCursorSchema();
if ( CURRENT_ITEM && (CURRENT_ITEM->m_Flags & IS_NEW) )
{
GetScreen()->m_CurrentItem = Del_SegmEdgeZone(&dc,
(EDGE_ZONE *) CURRENT_ITEM);
}
break;
case ID_POPUP_PCB_FILL_ZONE:
DrawPanel->MouseToCursorSchema();
Fill_Zone(&dc);
break;
case ID_POPUP_PCB_SELECT_NET_ZONE:
DrawPanel->MouseToCursorSchema();
CaptureNetName(&dc);
break;
case ID_POPUP_PCB_SELECT_WIDTH:
break;
case ID_AUX_TOOLBAR_PCB_TRACK_WIDTH:
{
int ii = m_SelTrackWidthBox->GetChoice();
g_DesignSettings.m_CurrentTrackWidth = g_DesignSettings.m_TrackWidhtHistory[ii];
DisplayTrackSettings();
m_SelTrackWidthBox_Changed = FALSE;
m_SelViaSizeBox_Changed = FALSE;
}
break;
case ID_POPUP_PCB_SELECT_WIDTH1:
case ID_POPUP_PCB_SELECT_WIDTH2:
case ID_POPUP_PCB_SELECT_WIDTH3:
case ID_POPUP_PCB_SELECT_WIDTH4:
case ID_POPUP_PCB_SELECT_WIDTH5:
case ID_POPUP_PCB_SELECT_WIDTH6:
case ID_POPUP_PCB_SELECT_WIDTH7:
case ID_POPUP_PCB_SELECT_WIDTH8:
DrawPanel->MouseToCursorSchema();
{
int ii = id - ID_POPUP_PCB_SELECT_WIDTH1;
g_DesignSettings.m_CurrentTrackWidth = g_DesignSettings.m_TrackWidhtHistory[ii];
DisplayTrackSettings();
}
break;
case ID_POPUP_PCB_SELECT_VIASIZE:
break;
case ID_AUX_TOOLBAR_PCB_VIA_SIZE:
{
int ii = m_SelViaSizeBox->GetChoice();
g_DesignSettings.m_CurrentViaSize = g_DesignSettings.m_ViaSizeHistory[ii];
DisplayTrackSettings();
m_SelTrackWidthBox_Changed = FALSE;
m_SelViaSizeBox_Changed = FALSE;
}
break;
case ID_POPUP_PCB_SELECT_VIASIZE1:
case ID_POPUP_PCB_SELECT_VIASIZE2:
case ID_POPUP_PCB_SELECT_VIASIZE3:
case ID_POPUP_PCB_SELECT_VIASIZE4:
case ID_POPUP_PCB_SELECT_VIASIZE5:
case ID_POPUP_PCB_SELECT_VIASIZE6:
case ID_POPUP_PCB_SELECT_VIASIZE7:
case ID_POPUP_PCB_SELECT_VIASIZE8:
case ID_POPUP_PCB_VIA_EDITING:
case ID_POPUP_PCB_VIA_HOLE_TO_DEFAULT:
case ID_POPUP_PCB_VIA_HOLE_TO_VALUE:
case ID_POPUP_PCB_VIA_HOLE_ENTER_VALUE:
case ID_POPUP_PCB_VIA_HOLE_EXPORT:
case ID_POPUP_PCB_VIA_HOLE_RESET_TO_DEFAULT:
case ID_POPUP_PCB_VIA_HOLE_EXPORT_TO_OTHERS:
Via_Edit_Control(&dc, id, (SEGVIA *) GetScreen()->m_CurrentItem);
break;
case ID_POPUP_PCB_MOVE_TRACK_NODE:
DrawPanel->MouseToCursorSchema();
Start_MoveOneTrackSegment((TRACK *) GetScreen()->m_CurrentItem,
&dc, TRUE);
break;
case ID_POPUP_PCB_BREAK_TRACK:
DrawPanel->MouseToCursorSchema();
{
TRACK * track = (TRACK *) GetScreen()->m_CurrentItem;
wxPoint pos = GetScreen()->m_Curseur;
track->Draw(DrawPanel, &dc, GR_XOR);
TRACK * newtrack = CreateLockPoint(&pos.x, &pos.y, track, NULL);
track->Draw(DrawPanel, &dc, GR_XOR);
newtrack->Draw(DrawPanel, &dc, GR_XOR);
}
break;
case ID_MENU_PCB_CLEAN:
Clean_Pcb(&dc);
break;
case ID_MENU_PCB_SWAP_LAYERS:
Swap_Layers(event);
break;
case ID_POPUP_PCB_AUTOROUTE_GET_AUTOROUTER:
GlobalRoute(&dc);
break;
case ID_POPUP_PCB_AUTOROUTE_GET_AUTOROUTER_DATA:
ReadAutoroutedTracks(&dc);
break;
case ID_PCB_USER_GRID_SETUP:
InstallGridFrame(pos);
break;
case ID_POPUP_PCB_DISPLAY_FOOTPRINT_DOC:
{
wxString msg = FindKicadHelpPath();
msg += EDA_Appl->m_EDA_CommonConfig->Read(wxT("module_doc_file"),
wxT("pcbnew/footprints.pdf"));
GetAssociatedDocument(this, wxEmptyString, msg);
}
break;
case ID_MENU_ARCHIVE_NEW_MODULES:
Archive_Modules(wxEmptyString, TRUE);
break;
case ID_MENU_ARCHIVE_ALL_MODULES:
Archive_Modules(wxEmptyString, FALSE);
break;
default:
{
DisplayError(this, wxT("WinEDA_PcbFrame::Process_Special_Functions() id error"));
break;
}
}
SetToolbars();
}
void FOOTPRINT_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
wxPoint pos;
bool redraw = false;
INSTALL_UNBUFFERED_DC( dc, m_canvas );
wxGetMousePosition( &pos.x, &pos.y );
pos.y += 20;
switch( id )
{
case wxID_CUT:
case wxID_COPY:
case ID_TOOLBARH_PCB_SELECT_LAYER:
case ID_MODEDIT_PAD_SETTINGS:
case ID_PCB_USER_GRID_SETUP:
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
case ID_POPUP_PCB_EDIT_TEXTEPCB:
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
case ID_POPUP_PCB_EDIT_TEXTMODULE:
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM:
case ID_POPUP_MODEDIT_EDIT_WIDTH_CURRENT_EDGE:
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
case ID_POPUP_MODEDIT_EDIT_LAYER_CURRENT_EDGE:
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
case ID_POPUP_PCB_DELETE_EDGE:
case ID_POPUP_PCB_DELETE_TEXTMODULE:
case ID_POPUP_PCB_DELETE_PAD:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_MIRROR_X_BLOCK:
case ID_POPUP_ROTATE_BLOCK:
case ID_POPUP_COPY_BLOCK:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
default:
if( m_canvas->IsMouseCaptured() )
{
// for all other commands: stop the move in progress
m_canvas->CallEndMouseCapture( &dc );
}
if( id != ID_POPUP_CANCEL_CURRENT_COMMAND )
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
}
switch( id )
{
case ID_EXIT:
Close( true );
break;
case ID_MODEDIT_SELECT_CURRENT_LIB:
Select_Active_Library();
break;
case ID_OPEN_MODULE_VIEWER:
{
FOOTPRINT_VIEWER_FRAME * viewer = FOOTPRINT_VIEWER_FRAME::GetActiveFootprintViewer();
if( viewer == NULL )
{
viewer = new FOOTPRINT_VIEWER_FRAME( this, NULL );
viewer->Show( true );
viewer->Zoom_Automatique( false );
}
else
{
if( viewer->IsIconized() )
viewer->Iconize( false );
viewer->Raise();
// Raising the window does not set the focus on Linux. This should work on
// any platform.
if( wxWindow::FindFocus() != viewer )
viewer->SetFocus();
}
}
break;
case ID_MODEDIT_DELETE_PART:
DeleteModuleFromCurrentLibrary();
break;
case ID_MODEDIT_NEW_MODULE:
{
Clear_Pcb( true );
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
MODULE* module = Create_1_Module( wxEmptyString );
if( module ) // i.e. if create module command not aborted
{
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
redraw = true;
module->SetPosition( wxPoint( 0, 0 ) );
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
Zoom_Automatique( false );
}
}
break;
case ID_MODEDIT_NEW_MODULE_FROM_WIZARD:
{
Clear_Pcb( true );
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
wxSemaphore semaphore( 0, 1 );
FOOTPRINT_WIZARD_FRAME *wizard = new FOOTPRINT_WIZARD_FRAME( this, &semaphore,
KICAD_DEFAULT_DRAWFRAME_STYLE | wxFRAME_FLOAT_ON_PARENT );
wizard->Show( true );
wizard->Zoom_Automatique( false );
while( semaphore.TryWait() == wxSEMA_BUSY ) // Wait for viewer closing event
{
wxYield();
wxMilliSleep( 50 );
}
MODULE* module = wizard->GetBuiltFootprint();
if( module ) // i.e. if create module command not aborted
{
/* Here we should make a copy of the object before adding to board*/
module->SetParent( (EDA_ITEM*)GetBoard() );
GetBoard()->m_Modules.Append( module );
// Initialize data relative to nets and netclasses (for a new
// module the defaults are used)
// This is mandatory to handle and draw pads
GetBoard()->BuildListOfNets();
redraw = true;
module->SetPosition( wxPoint( 0, 0 ) );
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
}
wizard->Destroy();
}
break;
case ID_MODEDIT_SAVE_LIBMODULE:
if( GetBoard()->m_Modules && getLibPath() != wxEmptyString )
{
Save_Module_In_Library( getLibPath(), GetBoard()->m_Modules, true, true );
GetScreen()->ClrModify();
}
break;
case ID_MODEDIT_INSERT_MODULE_IN_BOARD:
case ID_MODEDIT_UPDATE_MODULE_IN_BOARD:
{
// update module in the current board,
// not just add it to the board with total disregard for the netlist...
PCB_EDIT_FRAME* pcbframe = (PCB_EDIT_FRAME*) GetParent();
BOARD* mainpcb = pcbframe->GetBoard();
MODULE* source_module = NULL;
MODULE* module_in_edit = GetBoard()->m_Modules;
// Search the old module (source) if exists
// Because this source could be deleted when editing the main board...
if( module_in_edit->m_Link ) // this is not a new module ...
{
source_module = mainpcb->m_Modules;
for( ; source_module != NULL; source_module = (MODULE*) source_module->Next() )
{
if( module_in_edit->m_Link == source_module->GetTimeStamp() )
break;
}
}
if( ( source_module == NULL )
&& ( id == ID_MODEDIT_UPDATE_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "Unable to find the footprint source on the main board" ) );
msg << _( "\nCannot update the footprint" );
DisplayError( this, msg );
break;
}
if( ( source_module != NULL )
&& ( id == ID_MODEDIT_INSERT_MODULE_IN_BOARD ) ) // source not found
{
wxString msg;
msg.Printf( _( "A footprint source was found on the main board" ) );
msg << _( "\nCannot insert this footprint" );
DisplayError( this, msg );
break;
}
// Create the "new" module
MODULE* newmodule = new MODULE( *module_in_edit );
newmodule->SetParent( mainpcb );
newmodule->m_Link = 0;
// Put the footprint in the main pcb linked list.
mainpcb->Add( newmodule );
if( source_module ) // this is an update command
{
// In the main board,
// the new module replace the old module (pos, orient, ref, value
// and connexions are kept)
// and the source_module (old module) is deleted
PICKED_ITEMS_LIST pickList;
pcbframe->Exchange_Module( source_module, newmodule, &pickList );
newmodule->SetTimeStamp( module_in_edit->m_Link );
if( pickList.GetCount() )
pcbframe->SaveCopyInUndoList( pickList, UR_UNSPECIFIED );
}
else // This is an insert command
{
wxPoint cursor_pos = pcbframe->GetScreen()->GetCrossHairPosition();
pcbframe->GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
pcbframe->PlaceModule( newmodule, NULL );
pcbframe->GetScreen()->SetCrossHairPosition( cursor_pos );
newmodule->SetTimeStamp( GetNewTimeStamp() );
pcbframe->SaveCopyInUndoList( newmodule, UR_NEW );
}
newmodule->ClearFlags();
GetScreen()->ClrModify();
pcbframe->SetCurItem( NULL );
mainpcb->m_Status_Pcb = 0;
}
break;
case ID_MODEDIT_IMPORT_PART:
if( ! Clear_Pcb( true ) )
break; // //this command is aborted
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
Import_Module();
redraw = true;
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
GetScreen()->ClrModify();
Zoom_Automatique( false );
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
break;
case ID_MODEDIT_EXPORT_PART:
if( GetBoard()->m_Modules )
Export_Module( GetBoard()->m_Modules );
break;
case ID_MODEDIT_CREATE_NEW_LIB_AND_SAVE_CURRENT_PART:
if( GetBoard()->m_Modules )
{
// CreateModuleLibrary() only creates a new library, does not save footprint
wxString libPath = CreateNewLibrary();
if( libPath.size() )
SaveCurrentModule( &libPath );
}
break;
case ID_MODEDIT_SHEET_SET:
break;
case ID_MODEDIT_LOAD_MODULE:
{
wxString libPath = getLibPath(); // might be empty
wxLogDebug( wxT( "Loading module from library " ) + libPath );
GetScreen()->ClearUndoRedoList();
SetCurItem( NULL );
Clear_Pcb( true );
GetScreen()->SetCrossHairPosition( wxPoint( 0, 0 ) );
Load_Module_From_Library( libPath, true );
redraw = true;
}
if( GetBoard()->m_Modules )
GetBoard()->m_Modules->ClearFlags();
// if either m_Reference or m_Value are gone, reinstall them -
// otherwise you cannot see what you are doing on board
if( GetBoard() && GetBoard()->m_Modules )
{
TEXTE_MODULE* ref = GetBoard()->m_Modules->m_Reference;
TEXTE_MODULE* val = GetBoard()->m_Modules->m_Value;
if( val && ref )
{
ref->SetType( TEXT_is_REFERENCE ); // just in case ...
if( ref->m_Text.Length() == 0 )
ref->m_Text = L"Ref**";
val->SetType( TEXT_is_VALUE ); // just in case ...
if( val->m_Text.Length() == 0 )
val->m_Text = L"Val**";
}
}
GetScreen()->ClrModify();
Zoom_Automatique( false );
if( m_Draw3DFrame )
m_Draw3DFrame->NewDisplay();
break;
case ID_MODEDIT_PAD_SETTINGS:
InstallPadOptionsFrame( NULL );
break;
case ID_MODEDIT_CHECK:
break;
case ID_MODEDIT_EDIT_MODULE_PROPERTIES:
if( GetBoard()->m_Modules )
{
SetCurItem( GetBoard()->m_Modules );
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()-> GetCurItem() );
int ret = dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
if( ret > 0 )
m_canvas->Refresh();
}
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), 900, true );
redraw = true;
break;
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
m_canvas->MoveCursorToCrossHair();
Rotate_Module( NULL, (MODULE*) GetScreen()->GetCurItem(), -900, true );
redraw = true;
break;
case ID_POPUP_PCB_EDIT_MODULE:
{
DIALOG_MODULE_MODULE_EDITOR dialog( this, (MODULE*) GetScreen()->GetCurItem() );
int ret = dialog.ShowModal();
GetScreen()->GetCurItem()->ClearFlags();
GetScreen()->GetCurItem()->ClearFlags();
m_canvas->MoveCursorToCrossHair();
if( ret > 0 )
m_canvas->Refresh();
}
break;
case ID_POPUP_PCB_MOVE_PAD_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMovePad( (D_PAD*) GetScreen()->GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_EDIT_PAD:
InstallPadOptionsFrame( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_PAD:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
DeletePad( (D_PAD*) GetScreen()->GetCurItem(), false );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
m_canvas->MoveCursorToCrossHair();
Import_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem(), true );
break;
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
// Calls the global change dialog:
DlgGlobalChange_PadSettings( (D_PAD*) GetScreen()->GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
Export_Pad_Settings( (D_PAD*) GetScreen()->GetCurItem() );
break;
case ID_POPUP_PCB_EDIT_TEXTMODULE:
InstallTextModOptionsFrame( (TEXTE_MODULE*) GetScreen()->GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMoveTexteModule( (TEXTE_MODULE*) GetScreen()->GetCurItem(), &dc );
break;
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
RotateTextModule( (TEXTE_MODULE*) GetScreen()->GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_TEXTMODULE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
DeleteTextModule( (TEXTE_MODULE*) GetScreen()->GetCurItem() );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_EDGE:
Start_Move_EdgeMod( (EDGE_MODULE*) GetScreen()->GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
m_canvas->MoveCursorToCrossHair();
if( GetScreen()->GetCurItem()->IsNew() )
{
End_Edge_Module( (EDGE_MODULE*) GetScreen()->GetCurItem() );
SetCurItem( NULL );
}
break;
case ID_POPUP_MODEDIT_ENTER_EDGE_WIDTH:
{
EDGE_MODULE* edge = NULL;
if( GetScreen()->GetCurItem()
&& ( GetScreen()->GetCurItem()->Type() == PCB_MODULE_EDGE_T ) )
{
edge = (EDGE_MODULE*) GetScreen()->GetCurItem();
}
Enter_Edge_Width( edge );
m_canvas->MoveCursorToCrossHair();
if( edge )
m_canvas->Refresh();
}
break;
case ID_POPUP_MODEDIT_EDIT_BODY_ITEM :
m_canvas->MoveCursorToCrossHair();
InstallFootprintBodyItemPropertiesDlg( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_WIDTH_CURRENT_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Width( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_WIDTH_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Width( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_LAYER_CURRENT_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Layer( (EDGE_MODULE*) GetScreen()->GetCurItem() );
m_canvas->Refresh();
break;
case ID_POPUP_MODEDIT_EDIT_LAYER_ALL_EDGE:
m_canvas->MoveCursorToCrossHair();
Edit_Edge_Layer( NULL );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_DELETE_EDGE:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
m_canvas->MoveCursorToCrossHair();
RemoveStruct( GetScreen()->GetCurItem() );
SetCurItem( NULL );
break;
case ID_MODEDIT_MODULE_ROTATE:
case ID_MODEDIT_MODULE_MIRROR:
SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT );
Transform( (MODULE*) GetScreen()->GetCurItem(), id );
redraw = true;
break;
case ID_PCB_DRAWINGS_WIDTHS_SETUP:
InstallOptionsFrame( pos );
break;
case ID_PCB_PAD_SETUP:
{
BOARD_ITEM* item = GetCurItem();
if( item )
{
if( item->Type() != PCB_PAD_T )
item = NULL;
}
InstallPadOptionsFrame( (D_PAD*) item );
}
break;
case ID_PCB_USER_GRID_SETUP:
InstallGridFrame( pos );
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_COPY_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_COPY );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_ROTATE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ROTATE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_MIRROR_X_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MIRROR_X );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
default:
DisplayError( this,
wxT( "FOOTPRINT_EDIT_FRAME::Process_Special_Functions error" ) );
break;
}
if( redraw )
m_canvas->Refresh();
}
