/* Called from the TCP/IP thread. */
void lwIPAppsInit( void *pvArgument )
{
ip_addr_t xIPAddr, xNetMask, xGateway;
extern err_t ethernetif_init( struct netif *xNetIf );
static struct netif xNetIf;

	( void ) pvArgument;

	/* Set up the network interface. */
	ip_addr_set_zero( &xGateway );
	ip_addr_set_zero( &xIPAddr );
	ip_addr_set_zero( &xNetMask );

	LWIP_PORT_INIT_GW(&xGateway);
	LWIP_PORT_INIT_IPADDR(&xIPAddr);
	LWIP_PORT_INIT_NETMASK(&xNetMask);

	netif_set_default( netif_add( &xNetIf, &xIPAddr, &xNetMask, &xGateway, NULL, ethernetif_init, tcpip_input ) );
	netif_set_up( &xNetIf );

	/* Initialise the raw http server. */
	httpd_init();

	/* Install the server side include handler. */
	http_set_ssi_handler( uslwIPAppsSSIHandler, pccSSITags, sizeof( pccSSITags ) / sizeof( char * ) );
}
Exemple #2
0
/* Called from the TCP/IP thread. */
void lwIPAppsInit( void *pvArgument )
{
ip_addr_t xIPAddr, xNetMask, xGateway;
extern err_t xemacpsif_init( struct netif *netif );
extern void xemacif_input_thread( void *netif );
static struct netif xNetIf;

	( void ) pvArgument;

	/* Set up the network interface. */
	ip_addr_set_zero( &xGateway );
	ip_addr_set_zero( &xIPAddr );
	ip_addr_set_zero( &xNetMask );

	LWIP_PORT_INIT_GW(&xGateway);
	LWIP_PORT_INIT_IPADDR( &xIPAddr );
	LWIP_PORT_INIT_NETMASK(&xNetMask);

	/* Set mac address */
	xNetIf.hwaddr_len = 6;
	xNetIf.hwaddr[ 0 ] = configMAC_ADDR0;
	xNetIf.hwaddr[ 1 ] = configMAC_ADDR1;
	xNetIf.hwaddr[ 2 ] = configMAC_ADDR2;
	xNetIf.hwaddr[ 3 ] = configMAC_ADDR3;
	xNetIf.hwaddr[ 4 ] = configMAC_ADDR4;
	xNetIf.hwaddr[ 5 ] = configMAC_ADDR5;

	netif_set_default( netif_add( &xNetIf, &xIPAddr, &xNetMask, &xGateway, ( void * ) XPAR_XEMACPS_0_BASEADDR, xemacpsif_init, tcpip_input ) );
	netif_set_status_callback( &xNetIf, vStatusCallback );
	#if LWIP_DHCP
	{
		dhcp_start( &xNetIf );
	}
	#else
	{
		netif_set_up( &xNetIf );
	}
	#endif

	/* Install the server side include handler. */
	http_set_ssi_handler( uslwIPAppsSSIHandler, pccSSITags, sizeof( pccSSITags ) / sizeof( char * ) );

	/* Create the mutex used to ensure mutual exclusive access to the Tx 
	buffer. */
	xTxBufferMutex = xSemaphoreCreateMutex();
	configASSERT( xTxBufferMutex );

	/* Create the httpd server from the standard lwIP code.  This demonstrates
	use of the lwIP raw API. */
	httpd_init();

	sys_thread_new( "lwIP_In", xemacif_input_thread, &xNetIf, configMINIMAL_STACK_SIZE, configMAC_INPUT_TASK_PRIORITY );

	/* Create the FreeRTOS defined basic command server.  This demonstrates use
	of the lwIP sockets API. */
	xTaskCreate( vBasicSocketsCommandInterpreterTask, "CmdInt", configMINIMAL_STACK_SIZE * 5, NULL, configCLI_TASK_PRIORITY, NULL );
}
Exemple #3
0
/* This function initializes all network interfaces */
static void
msvc_netif_init()
{
#if USE_ETHERNET
  ip_addr_t ipaddr, netmask, gw;
#endif /* USE_ETHERNET */
#if USE_SLIPIF
  u8_t num_slip1 = 0;
  ip_addr_t ipaddr_slip1, netmask_slip1, gw_slip1;
#if USE_SLIPIF > 1
  u8_t num_slip2 = 1;
  ip_addr_t ipaddr_slip2, netmask_slip2, gw_slip2;
#endif /* USE_SLIPIF > 1 */
#endif /* USE_SLIPIF */

#if PPP_SUPPORT
  const char *username = NULL, *password = NULL;
#ifdef PPP_USERNAME
  username = PPP_USERNAME;
#endif
#ifdef PPP_PASSWORD
  password = PPP_PASSWORD;
#endif
  printf("pppInit\n");
  pppInit();
  pppSetAuth(PPPAUTHTYPE_ANY, username, password);
  printf("pppOpen: COM%d\n", (int)sio_idx);
#if PPPOS_SUPPORT
  ppp_sio = sio_open(sio_idx);
  if (ppp_sio == NULL) {
    printf("sio_open error\n");
  } else {
    ppp_desc = pppOpen(ppp_sio, pppLinkStatusCallback, NULL);
  }
#endif /* PPPOS_SUPPORT */
#endif  /* PPP_SUPPORT */

#if USE_ETHERNET
  ip_addr_set_zero(&gw);
  ip_addr_set_zero(&ipaddr);
  ip_addr_set_zero(&netmask);
#if USE_ETHERNET_TCPIP
#if USE_DHCP
  printf("Starting lwIP, local interface IP is dhcp-enabled\n");
#elif USE_AUTOIP
  printf("Starting lwIP, local interface IP is autoip-enabled\n");
#else /* USE_DHCP */
  LWIP_PORT_INIT_GW(&gw);
  LWIP_PORT_INIT_IPADDR(&ipaddr);
  LWIP_PORT_INIT_NETMASK(&netmask);
  printf("Starting lwIP, local interface IP is %s\n", ip_ntoa(&ipaddr));
#endif /* USE_DHCP */
#endif /* USE_ETHERNET_TCPIP */

#if NO_SYS
#if LWIP_ARP
  netif_set_default(netif_add(&netif, &ipaddr, &netmask, &gw, NULL, pcapif_init, ethernet_input));
#else /* LWIP_ARP */
  netif_set_default(netif_add(&netif, &ipaddr, &netmask, &gw, NULL, pcapif_init, ip_input));
#endif /* LWIP_ARP */
#else  /* NO_SYS */
  netif_set_default(netif_add(&netif, &ipaddr, &netmask, &gw, NULL, pcapif_init, tcpip_input));
#endif /* NO_SYS */
#if LWIP_NETIF_STATUS_CALLBACK
  netif_set_status_callback(&netif, status_callback);
#endif /* LWIP_NETIF_STATUS_CALLBACK */
#if LWIP_NETIF_LINK_CALLBACK
  netif_set_link_callback(&netif, link_callback);
#endif /* LWIP_NETIF_LINK_CALLBACK */

#if USE_ETHERNET_TCPIP
#if LWIP_AUTOIP
  autoip_set_struct(&netif, &netif_autoip);
#endif /* LWIP_AUTOIP */
#if LWIP_DHCP
  dhcp_set_struct(&netif, &netif_dhcp);
#endif /* LWIP_DHCP */
#if USE_DHCP
  dhcp_start(&netif);
#elif USE_AUTOIP
  autoip_start(&netif);
#else /* USE_DHCP */
  netif_set_up(&netif);
#endif /* USE_DHCP */
#else /* USE_ETHERNET_TCPIP */
  /* Use ethernet for PPPoE only */
  netif.flags &= ~(NETIF_FLAG_ETHARP | NETIF_FLAG_IGMP); /* no ARP */
  netif.flags |= NETIF_FLAG_ETHERNET; /* but pure ethernet */
#endif /* USE_ETHERNET_TCPIP */

#if PPP_SUPPORT && PPPOE_SUPPORT
  /* start PPPoE after ethernet netif is added! */
  ppp_desc = pppOverEthernetOpen(&netif, NULL, NULL, pppLinkStatusCallback, NULL);
#endif /* PPP_SUPPORT && PPPOE_SUPPORT */

#endif /* USE_ETHERNET */
#if USE_SLIPIF
  LWIP_PORT_INIT_SLIP1_IPADDR(&ipaddr_slip1);
  LWIP_PORT_INIT_SLIP1_GW(&gw_slip1);
  LWIP_PORT_INIT_SLIP1_NETMASK(&netmask_slip1);
  printf("Starting lwIP slipif, local interface IP is %s\n", ip_ntoa(&ipaddr_slip1));
#if SIO_USE_COMPORT
  num_slip1++; /* COM ports cannot be 0-based */
#endif
  netif_add(&slipif1, &ipaddr_slip1, &netmask_slip1, &gw_slip1, &num_slip1, slipif_init, ip_input);
#if !USE_ETHERNET
  netif_set_default(&slipif1);
#endif /* !USE_ETHERNET */
#if LWIP_NETIF_STATUS_CALLBACK
  netif_set_status_callback(&slipif1, status_callback);
#endif /* LWIP_NETIF_STATUS_CALLBACK */
#if LWIP_NETIF_LINK_CALLBACK
  netif_set_link_callback(&slipif1, link_callback);
#endif /* LWIP_NETIF_LINK_CALLBACK */
  netif_set_up(&slipif1);

#if USE_SLIPIF > 1
  LWIP_PORT_INIT_SLIP2_IPADDR(&ipaddr_slip2);
  LWIP_PORT_INIT_SLIP2_GW(&gw_slip2);
  LWIP_PORT_INIT_SLIP2_NETMASK(&netmask_slip2);
  printf("Starting lwIP SLIP if #2, local interface IP is %s\n", ip_ntoa(&ipaddr_slip2));
#if SIO_USE_COMPORT
  num_slip2++; /* COM ports cannot be 0-based */
#endif
  netif_add(&slipif2, &ipaddr_slip2, &netmask_slip2, &gw_slip2, &num_slip2, slipif_init, ip_input);
#if LWIP_NETIF_STATUS_CALLBACK
  netif_set_status_callback(&slipif2, status_callback);
#endif /* LWIP_NETIF_STATUS_CALLBACK */
#if LWIP_NETIF_LINK_CALLBACK
  netif_set_link_callback(&slipif2, link_callback);
#endif /* LWIP_NETIF_LINK_CALLBACK */
  netif_set_up(&slipif2);
#endif /* USE_SLIPIF > 1*/
#endif /* USE_SLIPIF */
}
Exemple #4
0
/* This function initializes all network interfaces */
static void
msvc_netif_init()
{
#if USE_ETHERNET
  ip_addr_t ipaddr, netmask, gw;
#endif /* USE_ETHERNET */

#if PPP_SUPPORT
  const char *username = NULL, *password = NULL;
#ifdef PPP_USERNAME
  username = PPP_USERNAME;
#endif
#ifdef PPP_PASSWORD
  password = PPP_PASSWORD;
#endif
  printf("pppInit\n");
  pppInit();
  pppSetAuth(PPPAUTHTYPE_ANY, username, password);
  printf("pppOpen: COM%d\n", (int)sio_idx);
#if PPPOS_SUPPORT
  ppp_sio = sio_open(sio_idx);
  if (ppp_sio == NULL) {
    printf("sio_open error\n");
  } else {
    ppp_desc = pppOpen(ppp_sio, pppLinkStatusCallback, NULL);
  }
#endif /* PPPOS_SUPPORT */
#endif  /* PPP_SUPPORT */

#if USE_ETHERNET
  ip_addr_set_zero(&gw);
  ip_addr_set_zero(&ipaddr);
  ip_addr_set_zero(&netmask);
#if USE_ETHERNET_TCPIP
#if USE_DHCP
  printf("Starting lwIP, local interface IP is dhcp-enabled\n");
#elif USE_AUTOIP
  printf("Starting lwIP, local interface IP is autoip-enabled\n");
#else /* USE_DHCP */
  LWIP_PORT_INIT_GW(&gw);
  LWIP_PORT_INIT_IPADDR(&ipaddr);
  LWIP_PORT_INIT_NETMASK(&netmask);
  printf("Starting lwIP, local interface IP is %s\n", ip_ntoa(&ipaddr));
#endif /* USE_DHCP */
#endif /* USE_ETHERNET_TCPIP */

#if NO_SYS
#if LWIP_ARP
  netif_set_default(netif_add(&netif, &ipaddr, &netmask, &gw, NULL, pcapif_init, ethernet_input));
#else /* LWIP_ARP */
  netif_set_default(netif_add(&netif, &ipaddr, &netmask, &gw, NULL, pcapif_init, ip_input));
#endif /* LWIP_ARP */
#else  /* NO_SYS */
  netif_set_default(netif_add(&netif, &ipaddr, &netmask, &gw, NULL, pcapif_init, tcpip_input));
#if LWIP_IPV6
  netif_create_ip6_linklocal_address(&netif, 1);
  printf("ip6 linklocal address: ");
  ip6_addr_debug_print(0xFFFFFFFF & ~LWIP_DBG_HALT, &netif.ip6_addr[0]);
  printf("\n");
#endif /* LWIP_IPV6 */
#endif /* NO_SYS */
#if LWIP_NETIF_STATUS_CALLBACK
  netif_set_status_callback(&netif, status_callback);
#endif /* LWIP_NETIF_STATUS_CALLBACK */
#if LWIP_NETIF_LINK_CALLBACK
  netif_set_link_callback(&netif, link_callback);
#endif /* LWIP_NETIF_LINK_CALLBACK */

#if USE_ETHERNET_TCPIP
#if LWIP_AUTOIP
  autoip_set_struct(&netif, &netif_autoip);
#endif /* LWIP_AUTOIP */
#if LWIP_DHCP
  dhcp_set_struct(&netif, &netif_dhcp);
#endif /* LWIP_DHCP */
#if USE_DHCP
  dhcp_start(&netif);
#elif USE_AUTOIP
  autoip_start(&netif);
#else /* USE_DHCP */
  netif_set_up(&netif);
#endif /* USE_DHCP */
#else /* USE_ETHERNET_TCPIP */
  /* Use ethernet for PPPoE only */
  netif.flags &= ~(NETIF_FLAG_ETHARP | NETIF_FLAG_IGMP); /* no ARP */
  netif.flags |= NETIF_FLAG_ETHERNET; /* but pure ethernet */
#endif /* USE_ETHERNET_TCPIP */

#if PPP_SUPPORT && PPPOE_SUPPORT
  /* start PPPoE after ethernet netif is added! */
  ppp_desc = pppOverEthernetOpen(&netif, NULL, NULL, pppLinkStatusCallback, NULL);
#endif /* PPP_SUPPORT && PPPOE_SUPPORT */

#endif /* USE_ETHERNET */
}
Exemple #5
0
/* This function initializes all network interfaces */
static void
msvc_netif_init(void)
{
#if LWIP_IPV4 && USE_ETHERNET
  ip4_addr_t ipaddr, netmask, gw;
#endif /* LWIP_IPV4 && USE_ETHERNET */
#if USE_SLIPIF
  u8_t num_slip1 = 0;
#if LWIP_IPV4
  ip4_addr_t ipaddr_slip1, netmask_slip1, gw_slip1;
#endif
#if USE_SLIPIF > 1
  u8_t num_slip2 = 1;
#if LWIP_IPV4
  ip4_addr_t ipaddr_slip2, netmask_slip2, gw_slip2;
#endif
#endif /* USE_SLIPIF > 1 */
#endif /* USE_SLIPIF */
#if USE_DHCP || USE_AUTOIP
  err_t err;
#endif

#if USE_PPP
  const char *username = NULL, *password = NULL;
#ifdef PPP_USERNAME
  username = PPP_USERNAME;
#endif
#ifdef PPP_PASSWORD
  password = PPP_PASSWORD;
#endif
  printf("ppp_connect: COM%d\n", (int)sio_idx);
#if PPPOS_SUPPORT
  ppp_sio = sio_open(sio_idx);
  if (ppp_sio == NULL) {
    printf("sio_open error\n");
  } else {
    ppp = pppos_create(&ppp_netif, ppp_output_cb, pppLinkStatusCallback, NULL);
    if (ppp == NULL) {
      printf("pppos_create error\n");
    } else {
      ppp_set_auth(ppp, PPPAUTHTYPE_ANY, username, password);
      ppp_connect(ppp, 0);
    }
  }
#endif /* PPPOS_SUPPORT */
#endif  /* USE_PPP */

#if USE_ETHERNET
#if LWIP_IPV4
#define NETIF_ADDRS &ipaddr, &netmask, &gw,
  ip4_addr_set_zero(&gw);
  ip4_addr_set_zero(&ipaddr);
  ip4_addr_set_zero(&netmask);
#if USE_ETHERNET_TCPIP
#if USE_DHCP
  printf("Starting lwIP, local interface IP is dhcp-enabled\n");
#elif USE_AUTOIP
  printf("Starting lwIP, local interface IP is autoip-enabled\n");
#else /* USE_DHCP */
  LWIP_PORT_INIT_GW(&gw);
  LWIP_PORT_INIT_IPADDR(&ipaddr);
  LWIP_PORT_INIT_NETMASK(&netmask);
  printf("Starting lwIP, local interface IP is %s\n", ip4addr_ntoa(&ipaddr));
#endif /* USE_DHCP */
#endif /* USE_ETHERNET_TCPIP */
#else /* LWIP_IPV4 */
#define NETIF_ADDRS
  printf("Starting lwIP, IPv4 disable\n");
#endif /* LWIP_IPV4 */

#if NO_SYS
  netif_set_default(netif_add(&netif, NETIF_ADDRS NULL, pcapif_init, netif_input));
#else  /* NO_SYS */
  netif_set_default(netif_add(&netif, NETIF_ADDRS NULL, pcapif_init, tcpip_input));
#endif /* NO_SYS */
#if LWIP_IPV6
  netif_create_ip6_linklocal_address(&netif, 1);
  printf("ip6 linklocal address: ");
  ip6_addr_debug_print(0xFFFFFFFF & ~LWIP_DBG_HALT, netif_ip6_addr(&netif, 0));
  printf("\n");
#endif /* LWIP_IPV6 */
#if LWIP_NETIF_STATUS_CALLBACK
  netif_set_status_callback(&netif, status_callback);
#endif /* LWIP_NETIF_STATUS_CALLBACK */
#if LWIP_NETIF_LINK_CALLBACK
  netif_set_link_callback(&netif, link_callback);
#endif /* LWIP_NETIF_LINK_CALLBACK */

#if USE_ETHERNET_TCPIP
#if LWIP_AUTOIP
  autoip_set_struct(&netif, &netif_autoip);
#endif /* LWIP_AUTOIP */
#if LWIP_DHCP
  dhcp_set_struct(&netif, &netif_dhcp);
#endif /* LWIP_DHCP */
  netif_set_up(&netif);
#if USE_DHCP
  err = dhcp_start(&netif);
  LWIP_ASSERT("dhcp_start failed", err == ERR_OK);
#elif USE_AUTOIP
  err = autoip_start(&netif);
  LWIP_ASSERT("autoip_start failed", err == ERR_OK);
#endif /* USE_DHCP */
#else /* USE_ETHERNET_TCPIP */
  /* Use ethernet for PPPoE only */
  netif.flags &= ~(NETIF_FLAG_ETHARP | NETIF_FLAG_IGMP); /* no ARP */
  netif.flags |= NETIF_FLAG_ETHERNET; /* but pure ethernet */
#endif /* USE_ETHERNET_TCPIP */

#if USE_PPP && PPPOE_SUPPORT
  /* start PPPoE after ethernet netif is added! */
  ppp = pppoe_create(&ppp_netif, &netif, NULL, NULL, pppLinkStatusCallback, NULL);
  if (ppp == NULL) {
    printf("pppos_create error\n");
  } else {
    ppp_set_auth(ppp, PPPAUTHTYPE_ANY, username, password);
    ppp_connect(ppp, 0);
  }
#endif /* USE_PPP && PPPOE_SUPPORT */

#endif /* USE_ETHERNET */
#if USE_SLIPIF
#if LWIP_IPV4
#define SLIP1_ADDRS &ipaddr_slip1, &netmask_slip1, &gw_slip1,
  LWIP_PORT_INIT_SLIP1_IPADDR(&ipaddr_slip1);
  LWIP_PORT_INIT_SLIP1_GW(&gw_slip1);
  LWIP_PORT_INIT_SLIP1_NETMASK(&netmask_slip1);
  printf("Starting lwIP slipif, local interface IP is %s\n", ip4addr_ntoa(&ipaddr_slip1));
#else
#define SLIP1_ADDRS
  printf("Starting lwIP slipif\n");
#endif
#if defined(SIO_USE_COMPORT) && SIO_USE_COMPORT
  num_slip1++; /* COM ports cannot be 0-based */
#endif
  netif_add(&slipif1, SLIP1_ADDRS &num_slip1, slipif_init, ip_input);
#if !USE_ETHERNET
  netif_set_default(&slipif1);
#endif /* !USE_ETHERNET */
#if LWIP_IPV6
  netif_create_ip6_linklocal_address(&slipif1, 1);
  printf("SLIP ip6 linklocal address: ");
  ip6_addr_debug_print(0xFFFFFFFF & ~LWIP_DBG_HALT, netif_ip6_addr(&slipif1, 0));
  printf("\n");
#endif /* LWIP_IPV6 */
#if LWIP_NETIF_STATUS_CALLBACK
  netif_set_status_callback(&slipif1, status_callback);
#endif /* LWIP_NETIF_STATUS_CALLBACK */
#if LWIP_NETIF_LINK_CALLBACK
  netif_set_link_callback(&slipif1, link_callback);
#endif /* LWIP_NETIF_LINK_CALLBACK */
  netif_set_up(&slipif1);

#if USE_SLIPIF > 1
#if LWIP_IPV4
#define SLIP2_ADDRS &ipaddr_slip2, &netmask_slip2, &gw_slip2,
  LWIP_PORT_INIT_SLIP2_IPADDR(&ipaddr_slip2);
  LWIP_PORT_INIT_SLIP2_GW(&gw_slip2);
  LWIP_PORT_INIT_SLIP2_NETMASK(&netmask_slip2);
  printf("Starting lwIP SLIP if #2, local interface IP is %s\n", ip4addr_ntoa(&ipaddr_slip2));
#else
#define SLIP2_ADDRS
  printf("Starting lwIP SLIP if #2\n");
#endif
#if defined(SIO_USE_COMPORT) && SIO_USE_COMPORT
  num_slip2++; /* COM ports cannot be 0-based */
#endif
  netif_add(&slipif2, SLIP2_ADDRS &num_slip2, slipif_init, ip_input);
#if LWIP_IPV6
  netif_create_ip6_linklocal_address(&slipif1, 1);
  printf("SLIP2 ip6 linklocal address: ");
  ip6_addr_debug_print(0xFFFFFFFF & ~LWIP_DBG_HALT, netif_ip6_addr(&slipif2, 0));
  printf("\n");
#endif /* LWIP_IPV6 */
#if LWIP_NETIF_STATUS_CALLBACK
  netif_set_status_callback(&slipif2, status_callback);
#endif /* LWIP_NETIF_STATUS_CALLBACK */
#if LWIP_NETIF_LINK_CALLBACK
  netif_set_link_callback(&slipif2, link_callback);
#endif /* LWIP_NETIF_LINK_CALLBACK */
  netif_set_up(&slipif2);
#endif /* USE_SLIPIF > 1*/
#endif /* USE_SLIPIF */
}