static void tegra_kbc_report_keys(struct tegra_kbc *kbc)
{
unsigned char scancodes[KBC_MAX_KPENT];
unsigned short keycodes[KBC_MAX_KPENT];
u32 val = 0;
unsigned int i;
unsigned int num_down = 0;
bool fn_keypress = false;
bool key_in_same_row = false;
bool key_in_same_col = false;
for (i = 0; i < KBC_MAX_KPENT; i++) {
if ((i % 4) == 0)
val = readl(kbc->mmio + KBC_KP_ENT0_0 + i);
if (val & 0x80) {
unsigned int col = val & 0x07;
unsigned int row = (val >> 3) & 0x0f;
unsigned char scancode =
MATRIX_SCAN_CODE(row, col, KBC_ROW_SHIFT);
scancodes[num_down] = scancode;
keycodes[num_down] = kbc->keycode[scancode];
/* If driver uses Fn map, do not report the Fn key. */
if ((keycodes[num_down] == KEY_FN) && kbc->use_fn_map)
fn_keypress = true;
else
num_down++;
}
val >>= 8;
}
static void __pmic8xxx_kp_scan_matrix(struct pmic8xxx_kp *kp, u16 *new_state,
u16 *old_state)
{
int row, col, code;
for (row = 0; row < kp->pdata->num_rows; row++) {
int bits_changed = new_state[row] ^ old_state[row];
if (!bits_changed)
continue;
for (col = 0; col < kp->pdata->num_cols; col++) {
if (!(bits_changed & (1 << col)))
continue;
dev_dbg(kp->dev, "key [%d:%d] %s\n", row, col,
!(new_state[row] & (1 << col)) ?
"pressed" : "released");
code = MATRIX_SCAN_CODE(row, col, PM8XXX_ROW_SHIFT);
input_event(kp->input, EV_MSC, MSC_SCAN, code);
input_report_key(kp->input,
kp->keycodes[code],
!(new_state[row] & (1 << col)));
input_sync(kp->input);
}
}
}
static void tca8418_read_keypad(struct tca8418_keypad *keypad_data)
{
struct input_dev *input = keypad_data->input;
unsigned short *keymap = input->keycode;
int error, col, row;
u8 reg, state, code;
/* Initial read of the key event FIFO */
error = tca8418_read_byte(keypad_data, REG_KEY_EVENT_A, ®);
/* Assume that key code 0 signifies empty FIFO */
while (error >= 0 && reg > 0) {
state = reg & KEY_EVENT_VALUE;
code = reg & KEY_EVENT_CODE;
row = code / TCA8418_MAX_COLS;
col = code % TCA8418_MAX_COLS;
row = (col) ? row : row - 1;
col = (col) ? col - 1 : TCA8418_MAX_COLS - 1;
code = MATRIX_SCAN_CODE(row, col, keypad_data->row_shift);
input_event(input, EV_MSC, MSC_SCAN, code);
input_report_key(input, keymap[code], state);
/* Read for next loop */
error = tca8418_read_byte(keypad_data, REG_KEY_EVENT_A, ®);
}
if (error < 0)
dev_err(&keypad_data->client->dev,
"unable to read REG_KEY_EVENT_A\n");
input_sync(input);
}
static int __stmpe1801_get_keycode_entries(u32 mask_row, u32 mask_col)
{
int col, row;
int i, j, comp;
row = mask_row & 0xff;
col = mask_col & 0x3ff;
for (i = 8; i > 0; i--) {
comp = 1 << (i - 1);
printk(" row: %d, comp: %d\n", row, comp);
if (row & comp) break;
}
for (j = 10; j > 0; j--) {
comp = 1 << (j - 1);
printk(" col: %d, comp: %d\n", col, comp);
if (col & comp) break;
}
#ifdef DBG_PRN
printk(" row: %d, col: %d\n", i, j);
#endif
return (MATRIX_SCAN_CODE(i - 1, j - 1, STMPE1801_KPC_ROW_SHIFT)+1);
}
static int __pmic8058_kp_scan_matrix(struct pmic8058_kp *kp, u16 *new_state,
u16 *old_state)
{
int row, col, code;
for (row = 0; row < kp->pdata->num_rows; row++) {
int bits_changed = new_state[row] ^ old_state[row];
if (!bits_changed)
continue;
for (col = 0; col < kp->pdata->num_cols; col++) {
if (!(bits_changed & (1 << col)))
continue;
dev_dbg(kp->dev, "key [%d:%d] %s\n", row, col,
!(new_state[row] & (1 << col)) ?
"pressed" : "released");
printk("key [%d:%d] %s\n", row, col,
!(new_state[row] & (1 << col)) ?
"pressed" : "released"); // qiukj add for test
code = MATRIX_SCAN_CODE(row, col, PM8058_ROW_SHIFT);
input_event(kp->input, EV_MSC, MSC_SCAN, code);
input_report_key(kp->input,
kp->keycodes[code],
!(new_state[row] & (1 << col)));
printk("keypad [%s] keycode %d\n",__func__,kp->keycodes[code]); // qiukj add for test
input_sync(kp->input);
}
}
return 0;
}
static void ske_keypad_report(struct ske_keypad *keypad, u8 status, int col)
{
int row = 0, code, pos;
struct input_dev *input = keypad->input;
u32 ske_ris;
int key_pressed;
int num_of_rows;
/* find out the row */
num_of_rows = hweight8(status);
do {
pos = __ffs(status);
row = pos;
status &= ~(1 << pos);
code = MATRIX_SCAN_CODE(row, col, SKE_KEYPAD_ROW_SHIFT);
ske_ris = readl(keypad->reg_base + SKE_RIS);
key_pressed = ske_ris & SKE_KPRISA;
input_event(input, EV_MSC, MSC_SCAN, code);
input_report_key(input, keypad->keymap[code], key_pressed);
input_sync(input);
num_of_rows--;
} while (num_of_rows);
}
static void __pmic8xxx_kp_scan_matrix(struct pmic8xxx_kp *kp, u16 *new_state,
u16 *old_state)
{
int row, col, code;
for (row = 0; row < kp->pdata->num_rows; row++) {
int bits_changed = new_state[row] ^ old_state[row];
if (!bits_changed)
continue;
for (col = 0; col < kp->pdata->num_cols; col++) {
if (!(bits_changed & (1 << col)))
continue;
if (!col && !row) pm8xxx_tactickle_key_to_touch = 1;
code = MATRIX_SCAN_CODE(row, col, PM8XXX_ROW_SHIFT);
input_event(kp->input, EV_MSC, MSC_SCAN, code);
input_report_key(kp->input,
kp->keycodes[code],
!(new_state[row] & (1 << col)));
input_sync(kp->input);
}
}
}
/******************************************************************************
* interrupt handler
*****************************************************************************/
static irqreturn_t ftkbc010_interrupt(int irq, void *dev_id)
{
struct ftkbc010 *ftkbc010 = dev_id;
struct input_dev *input = ftkbc010->input;
unsigned int status;
unsigned int cr;
status = ioread32(ftkbc010->base + FTKBC010_OFFSET_ISR);
/*
* The clear interrupt bits are inside control register,
* so we need to read it out and then modify it -
* completely brain-dead design.
*/
cr = ioread32(ftkbc010->base + FTKBC010_OFFSET_CR);
if (status & FTKBC010_ISR_RXINT) {
dev_dbg(&input->dev, "RXINT\n");
cr |= FTKBC010_CR_CL_RXINT;
}
if (status & FTKBC010_ISR_TXINT) {
dev_dbg(&input->dev, "TXINT\n");
cr |= FTKBC010_CR_CL_TXINT;
}
if (status & FTKBC010_ISR_PADINT) {
unsigned int data;
unsigned int row, col;
unsigned int scancode;
unsigned int keycode;
data = ioread32(ftkbc010->base + FTKBC010_OFFSET_XC);
col = ffs(0xff - FTKBC010_XC_L(data)) - 1;
data = ioread32(ftkbc010->base + FTKBC010_OFFSET_YC);
row = ffs(0xff - FTKBC010_YC_L(data)) - 1;
scancode = MATRIX_SCAN_CODE(row, col, ftkbc010->row_shift);
keycode = ftkbc010->keycode[scancode];
input_report_key(input, keycode, 1);
input_sync(input);
/* We cannot tell key release - simulate one */
input_report_key(input, keycode, 0);
input_sync(input);
dev_info(&input->dev, "(%x, %x) scancode %d, keycode %d\n",
row, col, scancode, keycode);
cr |= FTKBC010_CR_CL_PADINT;
}
iowrite32(cr, ftkbc010->base + FTKBC010_OFFSET_CR);
return IRQ_HANDLED;
}
/*
* This gets the keys from keyboard and reports it to input subsystem
*/
static void matrix_keypad_scan(struct work_struct *work)
{
struct matrix_keypad *keypad =
container_of(work, struct matrix_keypad, work.work);
struct input_dev *input_dev = keypad->input_dev;
const unsigned short *keycodes = input_dev->keycode;
const struct matrix_keypad_platform_data *pdata = keypad->pdata;
uint32_t new_state[MATRIX_MAX_COLS];
int row, col, code;
/* de-activate all columns for scanning */
activate_all_cols(pdata, false);
memset(new_state, 0, sizeof(new_state));
/* assert each column and read the row status out */
for (col = 0; col < pdata->num_col_gpios; col++) {
activate_col(pdata, col, true);
for (row = 0; row < pdata->num_row_gpios; row++)
new_state[col] |=
row_asserted(pdata, row) ? (1 << row) : 0;
activate_col(pdata, col, false);
}
for (col = 0; col < pdata->num_col_gpios; col++) {
uint32_t bits_changed;
bits_changed = keypad->last_key_state[col] ^ new_state[col];
if (bits_changed == 0)
continue;
for (row = 0; row < pdata->num_row_gpios; row++) {
if ((bits_changed & (1 << row)) == 0)
continue;
code = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
input_event(input_dev, EV_MSC, MSC_SCAN, code);
input_report_key(input_dev,
keycodes[code],
new_state[col] & (1 << row));
}
}
input_sync(input_dev);
memcpy(keypad->last_key_state, new_state, sizeof(new_state));
activate_all_cols(pdata, true);
/* Enable IRQs again */
spin_lock_irq(&keypad->lock);
keypad->scan_pending = false;
enable_row_irqs(keypad);
spin_unlock_irq(&keypad->lock);
}
static void omap_kp_tasklet(unsigned long data)
{
struct omap_kp *omap_kp_data = (struct omap_kp *) data;
unsigned short *keycodes = omap_kp_data->input->keycode;
unsigned int row_shift = get_count_order(omap_kp_data->cols);
unsigned char new_state[8], changed, key_down = 0;
int col, row;
int spurious = 0;
/* check for any changes */
omap_kp_scan_keypad(omap_kp_data, new_state);
/* check for changes and print those */
for (col = 0; col < omap_kp_data->cols; col++) {
changed = new_state[col] ^ keypad_state[col];
key_down |= new_state[col];
if (changed == 0)
continue;
for (row = 0; row < omap_kp_data->rows; row++) {
int key;
if (!(changed & (1 << row)))
continue;
#ifdef NEW_BOARD_LEARNING_MODE
printk(KERN_INFO "omap-keypad: key %d-%d %s\n", col,
row, (new_state[col] & (1 << row)) ?
"pressed" : "released");
#else
key = keycodes[MATRIX_SCAN_CODE(row, col, row_shift)];
if (!(kp_cur_group == (key & GROUP_MASK) ||
kp_cur_group == -1))
continue;
kp_cur_group = key & GROUP_MASK;
input_report_key(omap_kp_data->input, key & ~GROUP_MASK,
new_state[col] & (1 << row));
#endif
}
}
input_sync(omap_kp_data->input);
memcpy(keypad_state, new_state, sizeof(keypad_state));
if (key_down) {
int delay = HZ / 20;
/* some key is pressed - keep irq disabled and use timer
* to poll the keypad */
if (spurious)
delay = 2 * HZ;
mod_timer(&omap_kp_data->timer, jiffies + delay);
} else {
/* enable interrupts */
omap_writew(0, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
kp_cur_group = -1;
}
}
static int __pmic8058_kp_scan_matrix(struct pmic8058_kp *kp, u16 *new_state,
u16 *old_state)
{
int row, col, code;
for (row = 0; row < kp->pdata->num_rows; row++) {
int bits_changed = new_state[row] ^ old_state[row];
if (!bits_changed)
continue;
for (col = 0; col < kp->pdata->num_cols; col++) {
if (!(bits_changed & (1 << col)))
continue;
dev_dbg(kp->dev, "key [%d:%d] %s\n", row, col,
!(new_state[row] & (1 << col)) ?
"pressed" : "released");
code = MATRIX_SCAN_CODE(row, col, PM8058_ROW_SHIFT);
input_event(kp->input, EV_MSC, MSC_SCAN, code);
input_report_key(kp->input,
kp->keycodes[code],
!(new_state[row] & (1 << col)));
input_sync(kp->input);
#if defined (CONFIG_TARGET_LOCALE_USA)
pr_info("key [%d:%d] %s\n", row, col,
!(new_state[row] & (1 << col)) ?
"pressed" : "released");
#else
pr_info("key [%d:%d] %s keycode [%d]\n", row, col,
!(new_state[row] & (1 << col)) ?
"pressed" : "released", kp->keycodes[code]);
#endif
#if defined (CONFIG_TOUCHSCREEN_MELFAS)
#if defined (CONFIG_KOR_MODEL_SHV_E120L) || defined (CONFIG_KOR_MODEL_SHV_E120S) || defined (CONFIG_KOR_MODEL_SHV_E120K) || defined(CONFIG_KOR_MODEL_SHV_E160S) || defined(CONFIG_KOR_MODEL_SHV_E160K) || defined(CONFIG_KOR_MODEL_SHV_E160L)
if(!(new_state[row] & (1 << col)) && (kp->keycodes[code] == KEY_HOME)){
TSP_force_released();
}
#endif
#endif
#if defined(CONFIG_SEC_DEBUG)
sec_debug_check_crash_key(kp->keycodes[code], !(new_state[row] & (1 << col)));
#endif
}
}
return 0;
}
static int check_key_down(struct sci_keypad_t *sci_kpd, int key_status, int key_value)
{
int col, row, key;
unsigned short *keycodes = sci_kpd->input_dev->keycode;
unsigned int row_shift = get_count_order(sci_kpd->cols);
if((key_status & 0xff) != 0) {
col = KPD_INT0_COL(key_status);
row = KPD_INT0_ROW(key_status);
key = keycodes[MATRIX_SCAN_CODE(row, col, row_shift)];
if(key == key_value)
return 1;
}
if((key_status & 0xff00) != 0) {
col = KPD_INT1_COL(key_status);
row = KPD_INT1_ROW(key_status);
key = keycodes[MATRIX_SCAN_CODE(row, col, row_shift)];
if(key == key_value)
return 1;
}
return 0;
}
//LGE_CHANGE_E:<*****@*****.**><03/06/2012><Slate feature porting from LS840 GB>
static void __pmic8xxx_kp_scan_matrix(struct pmic8xxx_kp *kp, u16 *new_state,
u16 *old_state)
{
int row, col, code;
for (row = 0; row < kp->pdata->num_rows; row++) {
int bits_changed = new_state[row] ^ old_state[row];
if (!bits_changed)
continue;
for (col = 0; col < kp->pdata->num_cols; col++) {
if (!(bits_changed & (1 << col)))
continue;
dev_dbg(kp->dev, "key [%d:%d] %s\n", row, col,
!(new_state[row] & (1 << col)) ?
"pressed" : "released");
code = MATRIX_SCAN_CODE(row, col, PM8XXX_ROW_SHIFT);
input_event(kp->input, EV_MSC, MSC_SCAN, code);
#if defined (CONFIG_MACH_LGE_C1_BOARD_SPR)
if(lgf_key_lock != 0x55){
#endif
input_report_key(kp->input,
kp->keycodes[code],
!(new_state[row] & (1 << col)));
input_sync(kp->input);
//LGE_CHANGE_S:<*****@*****.**><03/06/2012><Slate feature porting from LS840 GB>
// LGE_CHANGE_S [[email protected]] [2011.10.21] [CAYMAN] enable or disable key logging status of slate [START]
#if defined (CONFIG_MACH_LGE_C1_BOARD_SPR)
#ifdef CONFIG_LGE_DIAG_ICD
if(key_touch_logging_status == 1)
{
printk(KERN_INFO "%s(), key_touch_logging_status 1 start key logging \n",__func__);
if(key_logging_count == 0)
slate_send_key_log_packet((unsigned long)kp->keycodes[code], (unsigned long)!col);
key_logging_count++;
if(key_logging_count > 1)
key_logging_count = 0;
}
#endif
// LGE_CHANGE_E [[email protected]] [2011.10.21] [CAYMAN] enable or disable key logging status of slate [END]
//LGE_CHANGE_E:<*****@*****.**><03/06/2012><Slate feature porting from LS840 GB>
}
#endif
}
}
}
static void stmpe1601_message_read(void)
{
u8 val, data, key_fifo[STMPE1601_KPC_DATA_LEN];
int row, col, kcode;
bool up;
int slide_state;
int i, ret;
/* Key LED ON */
if (!key_led_stat) {
slide_state = gpio_get_value(KEYPAD_SLIDE_SW);
if (slide_state) {
key_led_onoff(true);
key_led_stat = true;
}
}
/* Key Read */
val = stmpe1601_read(gkpad, STMPE1601_REG_INT_STA_LSB);
if (val & STPME1601_KPC_FIFO_OVR_EN)
dev_err(&gkpad->i2c->dev, "[Q-KEY] Keypad FIFO Overflow\n");
if (val & STPME1601_KPC_INT_EN) {
ret = stmpe1601_kpad_read_data(gkpad, key_fifo);
if (ret < 0)
dev_err(&gkpad->i2c->dev, "[Q-KEY] Keypad data read failed\n");
for (i = 0; i < STMPE1601_KPC_DATA_LEN-2; i++) {
data = key_fifo[i];
row = (data & STMPE1601_KPC_DATA_ROW) >> 3;
col = data & STMPE1601_KPC_DATA_COL;
kcode = MATRIX_SCAN_CODE(row, col, STMPE1601_KPAD_ROW_SHIFT);
up = data & STMPE1601_KPC_DATA_UP;
keypress = up;
if ((data & STMPE1601_KPC_DATA_NOKEY_MASK) ==
STMPE1601_KPC_DATA_NOKEY_MASK)
continue;
#if 0
dprintk(KERN_DEBUG"[Q-KEY] Row = %d, Col = %d, UP = %d\n",
row, col, up);
#else
printk(KERN_ERR"[Q-KEY] code:%d, row=%d, col=%d, up=%d\n",
gkpad->keycode[kcode], row, col, up);
#endif
input_event(gkpad->input, EV_MSC, MSC_SCAN, kcode);
input_report_key(gkpad->input, gkpad->keycode[kcode], !up);
input_sync(gkpad->input);
}
}
static void db5500_gpio_release_work(struct work_struct *work)
{
int code;
struct db5500_keypad *keypad = container_of(work,
struct db5500_keypad, gpio_work.work);
struct input_dev *input = keypad->input;
code = MATRIX_SCAN_CODE(keypad->gpio_col, keypad->gpio_row,
KEYPAD_ROW_SHIFT);
input_event(input, EV_MSC, MSC_SCAN, code);
input_report_key(input, keypad->keymap[code], 1);
input_sync(input);
input_report_key(input, keypad->keymap[code], 0);
input_sync(input);
}
/* Interrupt handler */
static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
{
struct omap4_keypad *keypad_data = dev_id;
struct input_dev *input_dev = keypad_data->input;
unsigned char key_state[ARRAY_SIZE(keypad_data->key_state)];
unsigned int col, row, code, changed;
u32 *new_state = (u32 *) key_state;
/* Disable interrupts */
__raw_writel(OMAP4_VAL_IRQDISABLE,
keypad_data->base + OMAP4_KBD_IRQENABLE);
*new_state = __raw_readl(keypad_data->base + OMAP4_KBD_FULLCODE31_0);
*(new_state + 1) = __raw_readl(keypad_data->base
+ OMAP4_KBD_FULLCODE63_32);
for (row = 0; row < keypad_data->rows; row++) {
changed = key_state[row] ^ keypad_data->key_state[row];
if (!changed)
continue;
for (col = 0; col < keypad_data->cols; col++) {
if (changed & (1 << col)) {
code = MATRIX_SCAN_CODE(row, col,
keypad_data->row_shift);
input_event(input_dev, EV_MSC, MSC_SCAN, code);
input_report_key(input_dev,
keypad_data->keymap[code],
key_state[row] & (1 << col));
}
}
}
input_sync(input_dev);
memcpy(keypad_data->key_state, key_state,
sizeof(keypad_data->key_state));
/* clear pending interrupts */
__raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
keypad_data->base + OMAP4_KBD_IRQSTATUS);
/* enable interrupts */
__raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
keypad_data->base + OMAP4_KBD_IRQENABLE);
return IRQ_HANDLED;
}
static void w90p910_keypad_scan_matrix(struct w90p910_keypad *keypad,
unsigned int status)
{
struct input_dev *input_dev = keypad->input_dev;
unsigned int row = KGET_RAW(status);
unsigned int col = KGET_COLUMN(status);
unsigned int code = MATRIX_SCAN_CODE(row, col, W90P910_ROW_SHIFT);
unsigned int key = keypad->keymap[code];
input_event(input_dev, EV_MSC, MSC_SCAN, code);
input_report_key(input_dev, key, 1);
input_sync(input_dev);
input_event(input_dev, EV_MSC, MSC_SCAN, code);
input_report_key(input_dev, key, 0);
input_sync(input_dev);
}
/*
* Compares the new keyboard state to the old one and produces key
* press/release events accordingly. The keyboard state is 13 bytes (one byte
* per column)
*/
static void cros_ec_keyb_process(struct cros_ec_keyb *ckdev,
uint8_t *kb_state, int len)
{
struct input_dev *idev = ckdev->idev;
struct cros_ec_device *ec = ckdev->ec;
int col, row;
int new_state;
int old_state;
int num_cols;
num_cols = len;
if (ckdev->ghost_filter && cros_ec_keyb_has_ghosting(ckdev, kb_state)) {
/*
* Simple-minded solution: ignore this state. The obvious
* improvement is to only ignore changes to keys involved in
* the ghosting, but process the other changes.
*/
dev_dbg(ckdev->dev, "ghosting found\n");
return;
}
for (col = 0; col < ckdev->cols; col++) {
for (row = 0; row < ckdev->rows; row++) {
int pos = MATRIX_SCAN_CODE(row, col, ckdev->row_shift);
const unsigned short *keycodes = idev->keycode;
int code;
code = keycodes[pos];
new_state = kb_state[col] & (1 << row);
old_state = ckdev->old_kb_state[col] & (1 << row);
if (new_state != old_state) {
dev_dbg(ckdev->dev,
"changed: [r%d c%d]: byte %02x\n",
row, col, new_state);
/* Change to power supply status */
if ((ec->charger && code == KEY_BATTERY)) {
power_supply_changed(ec->charger);
continue;
}
input_report_key(idev, code, new_state);
}
}
ckdev->old_kb_state[col] = kb_state[col];
}
input_sync(ckdev->idev);
}
/**
* db5500_keypad_report() - reports the keypad event
* @keypad: pointer to device structure
* @row: row value of keypad
* @curr: current event
* @previous: previous event
*
* This function uses to reports the event of the keypad
* and returns NONE.
*
* By default all column reads are 1111 1111b. Any press will pull the column
* down, leading to a 0 in any of these locations. We invert these values so
* that a 1 means means "column pressed". *
* If curr changes from the previous from 0 to 1, we report it as a key press.
* If curr changes from the previous from 1 to 0, we report it as a key
* release.
*/
static void db5500_keypad_report(struct db5500_keypad *keypad, int row,
u8 curr, u8 previous)
{
struct input_dev *input = keypad->input;
u8 changed = curr ^ previous;
while (changed) {
int col = __ffs(changed);
bool press = curr & BIT(col);
int code = MATRIX_SCAN_CODE(row, col, KEYPAD_ROW_SHIFT);
input_event(input, EV_MSC, MSC_SCAN, code);
input_report_key(input, keypad->keymap[code], press);
input_sync(input);
changed &= ~BIT(col);
}
}
/*
* Walks keycodes flipping bit in buffer COLUMNS deep where bit is ROW. Used by
* ghosting logic to ignore NULL or virtual keys.
*/
static void cros_ec_keyb_compute_valid_keys(struct cros_ec_keyb *ckdev)
{
int row, col;
int row_shift = ckdev->row_shift;
unsigned short *keymap = ckdev->idev->keycode;
unsigned short code;
BUG_ON(ckdev->idev->keycodesize != sizeof(*keymap));
for (col = 0; col < ckdev->cols; col++) {
for (row = 0; row < ckdev->rows; row++) {
code = keymap[MATRIX_SCAN_CODE(row, col, row_shift)];
if (code && (code != KEY_BATTERY))
ckdev->valid_keys[col] |= 1 << row;
}
dev_dbg(ckdev->dev, "valid_keys[%02d] = 0x%02x\n",
col, ckdev->valid_keys[col]);
}
}
static void __pmic8xxx_kp_scan_matrix(struct pmic8xxx_kp *kp, u16 *new_state,
u16 *old_state)
{
int row, col, code;
for (row = 0; row < kp->pdata->num_rows; row++) {
int bits_changed = new_state[row] ^ old_state[row];
if (!bits_changed)
continue;
for (col = 0; col < kp->pdata->num_cols; col++) {
if (!(bits_changed & (1 << col)))
continue;
dev_dbg(kp->dev, "key [%d:%d] %s\n", row, col,
!(new_state[row] & (1 << col)) ?
"pressed" : "released");
code = MATRIX_SCAN_CODE(row, col, PM8XXX_ROW_SHIFT);
input_event(kp->input, EV_MSC, MSC_SCAN, code);
input_report_key(kp->input,
kp->keycodes[code],
!(new_state[row] & (1 << col)));
input_sync(kp->input);
#if defined (DSEC_KEYBOARD_CODE_DEBUG)
pr_info("key [%d:%d] %s keycode [%d]\n", row, col,
!(new_state[row] & (1 << col)) ?
"pressed" : "released", kp->keycodes[code]);
#else
pr_info("key %s\n",
!(new_state[row] & (1 << col)) ? "pressed" : "released");
#endif
#if defined(CONFIG_SEC_DEBUG)
sec_debug_check_crash_key(kp->keycodes[code], !(new_state[row] & (1 << col)));
#endif
}
}
}
static int __pmic8058_kp_scan_matrix(struct pmic8058_kp *kp, u16 *new_state,
u16 *old_state)
{
int row, col, code;
for (row = 0; row < kp->pdata->num_rows; row++) {
int bits_changed = new_state[row] ^ old_state[row];
if (!bits_changed)
continue;
for (col = 0; col < kp->pdata->num_cols; col++) {
if (!(bits_changed & (1 << col)))
continue;
dev_dbg(kp->dev, "key [%d:%d] %s\n", row, col,
!(new_state[row] & (1 << col)) ?
"pressed" : "released");
code = MATRIX_SCAN_CODE(row, col, PM8058_ROW_SHIFT);
/* in order to avoid reporting unvalid codes to input system, we should check the key's value not the index */
/* report the event only if the key is in the map. */
#ifdef CONFIG_HUAWEI_KERNEL
if (kp->keycodes[code])
{
#endif
input_event(kp->input, EV_MSC, MSC_SCAN, code);
input_report_key(kp->input,
kp->keycodes[code],
!(new_state[row] & (1 << col)));
input_sync(kp->input);
#ifdef CONFIG_HUAWEI_KERNEL
}
#endif
}
}
return 0;
}
static bool matrix_keypad_map_key(struct input_dev *input_dev,
unsigned int rows, unsigned int cols,
unsigned int row_shift, unsigned int key)
{
unsigned short *keymap = input_dev->keycode;
unsigned int row = KEY_ROW(key);
unsigned int col = KEY_COL(key);
unsigned short code = KEY_VAL(key);
if (row >= rows || col >= cols) {
dev_err(input_dev->dev.parent,
"%s: invalid keymap entry 0x%x (row: %d, col: %d, rows: %d, cols: %d)\n",
__func__, key, row, col, rows, cols);
return false;
}
keymap[MATRIX_SCAN_CODE(row, col, row_shift)] = code;
__set_bit(code, input_dev->keybit);
return true;
}
static void ske_keypad_read_data(struct ske_keypad *keypad)
{
struct input_dev *input = keypad->input;
u16 status;
int col = 0, row = 0, code;
int ske_asr, ske_ris, key_pressed, i;
/*
* Read the auto scan registers
*
* Each SKE_ASRx (x=0 to x=3) contains two row values.
* lower byte contains row value for column 2*x,
* upper byte contains row value for column 2*x + 1
*/
for (i = 0; i < SKE_NUM_ASRX_REGISTERS; i++) {
ske_asr = readl(keypad->reg_base + SKE_ASR0 + (4 * i));
if (!ske_asr)
continue;
/* now that ASRx is zero, find out the column x and row y*/
if (ske_asr & 0xff) {
col = i * 2;
status = ske_asr & 0xff;
} else {
col = (i * 2) + 1;
status = (ske_asr & 0xff00) >> 8;
}
/* find out the row */
row = __ffs(status);
code = MATRIX_SCAN_CODE(row, col, SKE_KEYPAD_ROW_SHIFT);
ske_ris = readl(keypad->reg_base + SKE_RIS);
key_pressed = ske_ris & SKE_KPRISA;
input_event(input, EV_MSC, MSC_SCAN, code);
input_report_key(input, keypad->keymap[code], key_pressed);
input_sync(input);
}
}
static void __pmic8xxx_kp_scan_matrix(struct pmic8xxx_kp *kp, u16 *new_state,
u16 *old_state)
{
int row, col, code;
for (row = 0; row < kp->pdata->num_rows; row++) {
int bits_changed = new_state[row] ^ old_state[row];
if (!bits_changed)
continue;
for (col = 0; col < kp->pdata->num_cols; col++) {
if (!(bits_changed & (1 << col)))
continue;
dev_dbg(kp->dev, "key [%d:%d] %s\n", row, col,
!(new_state[row] & (1 << col)) ?
"pressed" : "released");
#if defined(CONFIG_MACH_APQ8064_GKKT)||defined(CONFIG_MACH_APQ8064_GKU) || defined(CONFIG_MACH_APQ8064_GKSK)
if(!row && !col)
pr_info("[key] Volume Down %s\n",!(new_state[row] & (1 << col)) ? "pressed" : "released");
else if(!row && col)
pr_info("[key] Volume Up %s\n",!(new_state[row] & (1 << col)) ? "pressed" : "released");
else if(row && !col)
pr_info("[key] Quick Memo %s\n",!(new_state[row] & (1 << col)) ? "pressed" : "released");
else
pr_info("[key] Home %s\n",!(new_state[row] & (1 << col)) ? "pressed" : "released");
#endif
code = MATRIX_SCAN_CODE(row, col, PM8XXX_ROW_SHIFT);
input_event(kp->input, EV_MSC, MSC_SCAN, code);
input_report_key(kp->input,
kp->keycodes[code],
!(new_state[row] & (1 << col)));
input_sync(kp->input);
}
}
}
/* Update the new_keycode_state*/
static void k3v2_keypad_update_keycode(struct k3v2_keypad *keypad,
unsigned char *new_scancode_state,
uint16_t *new_keycode_state)
{
int row = 0;
int col = 0;
int r = 0;
int c = 0;
int index = 0;
uint8_t keycode = 0;
for (row = 0; row < KPC_MAX_ROWS; row++) {
for (col = 0; col < KPC_MAX_COLS; col++) {
if (new_scancode_state[row] & (1 << col)) {
index = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
keycode = keypad->keycodes[index];
c = keycode & 0x0F;
r = keycode >> 4;
new_keycode_state[r] |= (1 << c);
}
}
}
static void __pmic8xxx_kp_scan_matrix(struct pmic8xxx_kp *kp, u16 *new_state,
u16 *old_state)
{
int row, col, code;
for (row = 0; row < kp->pdata->num_rows; row++) {
int bits_changed = new_state[row] ^ old_state[row];
if (!bits_changed)
continue;
for (col = 0; col < kp->pdata->num_cols; col++) {
if (!(bits_changed & (1 << col)))
continue;
dev_dbg(kp->dev, "key [%d:%d] %s\n", row, col,
!(new_state[row] & (1 << col)) ?
"pressed" : "released");
code = MATRIX_SCAN_CODE(row, col, PM8XXX_ROW_SHIFT);
/*reduce invalid input event*/
#ifdef CONFIG_HUAWEI_KERNEL
if (kp->keycodes[code])
{
#endif
input_event(kp->input, EV_MSC, MSC_SCAN, code);
input_report_key(kp->input,
kp->keycodes[code],
!(new_state[row] & (1 << col)));
/* use mmi_keystate save the key state */
mmi_keystate[kp->keycodes[code]] = (!(new_state[row]&(1<<col)))? MMI_KEY_DOWN :MMI_KEY_UP ;
input_sync(kp->input);
#ifdef CONFIG_HUAWEI_KERNEL
}
#endif
}
}
}
static bool samsung_keypad_report(struct samsung_keypad *keypad,
unsigned int *row_state)
{
struct input_dev *input_dev = keypad->input_dev;
unsigned int changed;
unsigned int pressed;
unsigned int key_down = 0;
unsigned int val;
unsigned int col, row;
for (col = 0; col < keypad->cols; col++) {
changed = row_state[col] ^ keypad->row_state[col];
key_down |= row_state[col];
if (!changed)
continue;
for (row = 0; row < keypad->rows; row++) {
if (!(changed & (1 << row)))
continue;
pressed = row_state[col] & (1 << row);
dev_dbg(&keypad->input_dev->dev,
"key %s, row: %d, col: %d\n",
pressed ? "pressed" : "released", row, col);
val = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
input_event(input_dev, EV_MSC, MSC_SCAN, val);
input_report_key(input_dev,
keypad->keycodes[val], pressed);
}
input_sync(keypad->input_dev);
}
memcpy(keypad->row_state, row_state, sizeof(keypad->row_state));
return key_down;
}
static void __pmic8xxx_kp_scan_matrix(struct pmic8xxx_kp *kp, u16 *new_state,
u16 *old_state)
{
int row, col, code;
for (row = 0; row < kp->pdata->num_rows; row++) {
int bits_changed = new_state[row] ^ old_state[row];
if (!bits_changed)
continue;
for (col = 0; col < kp->pdata->num_cols; col++) {
if (!(bits_changed & (1 << col)))
continue;
#if !defined(CONFIG_SAMSUNG_PRODUCT_SHIP)
dev_err(kp->dev, "key [%d:%d] %s\n", row, col,
!(new_state[row] & (1 << col)) ?
"pressed" : "released");
#endif
#if defined(CONFIG_MACH_KS02)
if(!(new_state[row] & (1 << col)))
key_state = 1;
else
key_state = 0;
#endif
code = MATRIX_SCAN_CODE(row, col, PM8XXX_ROW_SHIFT);
input_event(kp->input, EV_MSC, MSC_SCAN, code);
input_report_key(kp->input,
kp->keycodes[code],
!(new_state[row] & (1 << col)));
input_sync(kp->input);
}
}
}
/*
* Compare the new matrix state (volatile) with the stable one stored in
* keypad->matrix_stable_state and fire events if changes are detected.
*/
static void imx_keypad_fire_events(struct imx_keypad *keypad,
unsigned short *matrix_volatile_state)
{
struct input_dev *input_dev = keypad->input_dev;
int row, col;
for (col = 0; col < MAX_MATRIX_KEY_COLS; col++) {
unsigned short bits_changed;
int code;
if ((keypad->cols_en_mask & (1 << col)) == 0)
continue; /* Column is not enabled */
bits_changed = keypad->matrix_stable_state[col] ^
matrix_volatile_state[col];
if (bits_changed == 0)
continue; /* Column does not contain changes */
for (row = 0; row < MAX_MATRIX_KEY_ROWS; row++) {
if ((keypad->rows_en_mask & (1 << row)) == 0)
continue; /* Row is not enabled */
if ((bits_changed & (1 << row)) == 0)
continue; /* Row does not contain changes */
code = MATRIX_SCAN_CODE(row, col, MATRIX_ROW_SHIFT);
input_event(input_dev, EV_MSC, MSC_SCAN, code);
input_report_key(input_dev, keypad->keycodes[code],
matrix_volatile_state[col] & (1 << row));
dev_dbg(&input_dev->dev, "Event code: %d, val: %d",
keypad->keycodes[code],
matrix_volatile_state[col] & (1 << row));
}
}
input_sync(input_dev);
}
