Exemple #1
0
void Mclib_API_thread_entry(void* parameter)
{

    /* Main PWM Output Enable */
    TIM_CtrlPWMOutputs(TIM1,ENABLE);


    // Enable the Adv Current Reading during Run state
    SVPWM_3ShuntAdvCurrentReading(ENABLE);
		
    while (1)
    {
			
				switch (State)
				{
					case IDLE:    // Idle state   
					break;
					
					case INIT:
						MCL_Init();
						delay_ms(15);
						State = START;
					break;
						
					case START: 
					break;
							
					case RUN:   // motor running       
						if(ENC_ErrorOnFeedback() == RT_TRUE)
						{
							//LEDToggle(LED1);
							MCL_SetFault(SPEED_FEEDBACK);
						}
						
					break;  
					
					case STOP:    // motor stopped
							// shutdown power         
							/* Main PWM Output Disable */
//							TIM_CtrlPWMOutputs(TIM1, DISABLE);
							F40X_TurnOfflowsides();
							
							State = WAIT;
										 
							SVPWM_3ShuntAdvCurrentReading(DISABLE);

							SVPWM_3ShuntCalcDutyCycles(Stat_Volt_alfa_beta);
															
							delay_ms(10);
					break;
					
					case WAIT:    // wait state
							if(ENC_Get_Mechanical_Speed() ==0)             
							{              
								State = IDLE;              
							}       
						break;
				
					case FAULT:                   
							if (MCL_ClearFault() == RT_TRUE)
							{ 
								State = IDLE;
							}
						break;
				
					default:        
						break;
				}
	
			rt_thread_delay( RT_TICK_PER_SECOND/250 );					
		}
}
Exemple #2
0
/*******************************************************************************
* Function Name  : main
* Description    : Main program.
* Input          : None
* Output         : None
* Return         : None
*******************************************************************************/
int main(void)
{			
	SystemInit();
	
	/*速度反馈初始化*/	
	ENC_Init( );
	
	/*电流反馈初始化*/
	SVPWM_3ShuntInit();
	
	/*时基初始化,并启动TIM6计算速度,初始化PID*/
	TB_Init( );
	Tim6_Init( );
	PID_Init(&PID_Torque_InitStructure, &PID_Flux_InitStructure, &PID_Speed_InitStructure);	
	
	/*温度,电压数组初始化*/
	MCL_Init_Arrays();  

	/*交互界面初始化*/		
	KEYS_Init( );
	LCD_Display_init();
	/*-------------------*/
	Res_f=1; //上电完成

	//串口示波器初始化
	usart_init(115200);
	while(1)
	{ 
		
		/*UI显示,以及电源报警,用户管理*/
		Display_LCD( );
		MCL_ChkPowerStage( );    
		KEYS_process( );

		/*状态机开启运行*/
		switch (State)
		{
			case IDLE:    //通过sel按键进入INIT ,在WAIT和FAULT中进入IDEL
			break;

			case INIT:
				MCL_Init( );//初始化电机控制层
				TB_Set_StartUp_Timeout(3000);
				State = START; 
			break;

			case START:  
				//passage to state RUN is performed by startup functions; 
			break;

			case RUN:  //电机运行过程中,检测速度反馈是否存在问题      
				if(ENC_ErrorOnFeedback() == TRUE)
				{
					MCL_SetFault(SPEED_FEEDBACK);
				}

			break;  

			case STOP:  //关闭TIM1的输出,状态转为等待,停止电流检测,设置Valpha和Vbeta为0,计算三相占空比 
				TIM_CtrlPWMOutputs(TIM1, DISABLE);
				State = WAIT;								        
				SVPWM_3ShuntAdvCurrentReading(DISABLE);											
				Stat_Volt_alfa_beta.qV_Component1 = Stat_Volt_alfa_beta.qV_Component2 = 0;
				SVPWM_3ShuntCalcDutyCycles(Stat_Volt_alfa_beta);
				TB_Set_Delay_500us(2000); // 1 sec delay		
			break;

			case WAIT:    // 等待速度为零时,将状态转为IDEL
				if (TB_Delay_IsElapsed( ) == TRUE) 
				{
					if(ENC_Get_Mechanical_Speed( ) ==0)             
					{              
						State = IDLE;              
					}
				}
			break;

			case FAULT: //状态变为IDEL,全局变量设为第一次启动                  
				if (MCL_ClearFault( ) == TRUE)
				{
					if(wGlobal_Flags & SPEED_CONTROL == SPEED_CONTROL)
					{
						//速度控制模式
						bMenu_index = CONTROL_MODE_MENU_1;
					}
					else
					{
						//力矩控制模式
						bMenu_index = CONTROL_MODE_MENU_6;
					} 					
					State = IDLE;
					wGlobal_Flags |= FIRST_START;
					Hall_Start_flag=0;
				}
			break;

			default:        
			break;
		}	
		usart_watcher(Speed_Iq_Id_watch);
		/********End of Usart_watch**************/
	}
}