int main(void)
{
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/* MCU Configuration----------------------------------------------------------*/
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
HAL_Init();
/* Configure the system clock */
SystemClock_Config();
/* Initialize all configured peripherals */
MX_GPIO_Init();
MX_DMA_Init();
MX_SPI1_Init();
MX_TIM2_Init();
MX_TIM3_Init();
MX_TIM7_Init();
MX_TIM10_Init();
MX_TIM11_Init();
MX_TIM13_Init();
MX_TIM14_Init();
MX_USART1_UART_Init();
MX_USART2_UART_Init();
/* USER CODE BEGIN 2 */
HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_1); //Motor1
HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_4); //Motor2
HAL_TIM_PWM_Start(&htim3, TIM_CHANNEL_1); //Motor3
HAL_TIM_PWM_Start(&htim3, TIM_CHANNEL_4); //Motor4
/* USER CODE END 2 */
/* Infinite loop */
/* USER CODE BEGIN WHILE */
while (1)
{
/* USER CODE END WHILE */
/* USER CODE BEGIN 3 */
}
/* USER CODE END 3 */
}
int main(void)
{
/* USER CODE BEGIN 1 */
/* Data initialization */
int_T i;
/* USER CODE END 1 */
/* MCU Configuration----------------------------------------------------------*/
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
HAL_Init();
/* Configure the system clock */
SystemClock_Config();
/* Initialize all configured peripherals */
MX_GPIO_Init();
MX_ADC1_Init();
MX_ADC2_Init();
MX_CAN1_Init();
MX_CAN2_Init();
MX_DAC_Init();
MX_I2C1_Init();
MX_SPI2_Init();
MX_SPI3_Init();
MX_SPI4_Init();
MX_TIM2_Init();
MX_TIM3_Init();
MX_TIM5_Init();
MX_TIM8_Init();
MX_TIM9_Init();
MX_TIM13_Init();
MX_USART1_UART_Init();
MX_USART2_UART_Init();
MX_USART6_UART_Init();
/* USER CODE BEGIN 2 */
/* Systick configuration and enable SysTickHandler interrupt */
if (SysTick_Config((uint32_t)(SystemCoreClock * 0.5))) {
autoReloadTimerLoopVal_S = 1;
do {
autoReloadTimerLoopVal_S++;
} while ((uint32_t)(SystemCoreClock * 0.5)/autoReloadTimerLoopVal_S >
SysTick_LOAD_RELOAD_Msk);
SysTick_Config((uint32_t)(SystemCoreClock * 0.5)/autoReloadTimerLoopVal_S);
}
remainAutoReloadTimerLoopVal_S = autoReloadTimerLoopVal_S;//Set nb of loop to do
/* USER CODE END 2 */
/* Infinite loop */
/* USER CODE BEGIN WHILE */
for (i=0;i<1;i++) {
OverrunFlags[i] = 0;
}
/* Model initialization call */
Test_Stateflow_initialize();
/* Infinite loop */
/* Real time from systickHandler */
while (1) {
/*Process tasks every solver time*/
if (remainAutoReloadTimerLoopVal_S == 0) {
remainAutoReloadTimerLoopVal_S = autoReloadTimerLoopVal_S;
/* Check base rate for overrun */
if (OverrunFlags[0]) {
rtmSetErrorStatus(Test_Stateflow_M, "Overrun");
}
OverrunFlags[0] = true;
/* Step the model for base rate */
Test_Stateflow_step();
/* Get model outputs here */
/* Indicate task for base rate complete */
OverrunFlags[0] = false;
}
}
/* USER CODE END WHILE */
/* USER CODE BEGIN 3 */
/* USER CODE END 3 */
}
int main(void)
{
uint8_t oldRelease = 0;
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/* Enable I-Cache-------------------------------------------------------------*/
SCB_EnableICache();
/* Enable D-Cache-------------------------------------------------------------*/
SCB_EnableDCache();
/* MCU Configuration----------------------------------------------------------*/
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
HAL_Init();
/* Configure the system clock */
SystemClock_Config();
/* Initialize all configured peripherals */
MX_GPIO_Init();
MX_ADC1_Init();
MX_DMA_Init();
MX_CAN1_Init();
MX_CAN2_Init();
MX_DAC_Init();
MX_DMA2D_Init();
MX_FMC_Init();
MX_I2C2_Init();
MX_SDMMC1_SD_Init();
MX_SPI2_Init();
MX_TIM6_Init();
MX_TIM7_Init();
MX_USART2_UART_Init();
MX_USART3_UART_Init();
MX_USART6_UART_Init();
MX_FATFS_Init();
MX_USB_HOST_Init();
MX_TIM11_Init();
MX_TIM13_Init();
MX_TIM14_Init();
/* USER CODE BEGIN 2 */
//MPU_Config();
InitPeriph();
/* USER CODE END 2 */
/* Infinite loop */
/* USER CODE BEGIN WHILE */
while(1){
/* USER CODE END WHILE */
MX_USB_HOST_Process();
/* USER CODE BEGIN 3 */
RoutineFast(); // get and run deals from medium queue
if(oldRelease && Touch_Data.status == TOUCH_RELEASED){
ReleaseFunction();
}
else
{oldRelease = 1;}
if(UpdateScreen|| DISP.ReleaseFlag || TimeIsReady){
Run_GUI();
Show_GUI();
UpdateScreen = 0;
DISP.ReleaseFlag = 0;
}
}
/* USER CODE END 3 */
}
