/**
Used to translate a device path node to a namespace ID.
The EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL.GetNamespace() function determines the namespace ID associated with the
namespace described by DevicePath.
If DevicePath is a device path node type that the NVM Express Pass Thru driver supports, then the NVM Express
Pass Thru driver will attempt to translate the contents DevicePath into a namespace ID.
If this translation is successful, then that namespace ID is returned in NamespaceId, and EFI_SUCCESS is returned
@param[in] This A pointer to the EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL instance.
@param[in] DevicePath A pointer to the device path node that describes an NVM Express namespace on
the NVM Express controller.
@param[out] NamespaceId The NVM Express namespace ID contained in the device path node.
@retval EFI_SUCCESS DevicePath was successfully translated to NamespaceId.
@retval EFI_INVALID_PARAMETER If DevicePath or NamespaceId are NULL, then EFI_INVALID_PARAMETER is returned.
@retval EFI_UNSUPPORTED If DevicePath is not a device path node type that the NVM Express Pass Thru driver
supports, then EFI_UNSUPPORTED is returned.
@retval EFI_NOT_FOUND If DevicePath is a device path node type that the NVM Express Pass Thru driver
supports, but there is not a valid translation from DevicePath to a namespace ID,
then EFI_NOT_FOUND is returned.
**/
EFI_STATUS
EFIAPI
NvmExpressGetNamespace (
IN EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL *This,
IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
OUT UINT32 *NamespaceId
)
{
NVME_NAMESPACE_DEVICE_PATH *Node;
NVME_CONTROLLER_PRIVATE_DATA *Private;
if ((This == NULL) || (DevicePath == NULL) || (NamespaceId == NULL)) {
return EFI_INVALID_PARAMETER;
}
if (DevicePath->Type != MESSAGING_DEVICE_PATH) {
return EFI_UNSUPPORTED;
}
Node = (NVME_NAMESPACE_DEVICE_PATH *)DevicePath;
Private = NVME_CONTROLLER_PRIVATE_DATA_FROM_PASS_THRU (This);
if (DevicePath->SubType == MSG_NVME_NAMESPACE_DP) {
if (DevicePathNodeLength(DevicePath) != sizeof(NVME_NAMESPACE_DEVICE_PATH)) {
return EFI_NOT_FOUND;
}
//
// Check NamespaceId in the device path node is valid or not.
//
if ((Node->NamespaceId == 0) ||
(Node->NamespaceId > Private->ControllerData->Nn)) {
return EFI_NOT_FOUND;
}
*NamespaceId = Node->NamespaceId;
return EFI_SUCCESS;
} else {
return EFI_UNSUPPORTED;
}
}
/**
Starts a device controller or a bus controller.
The Start() function is designed to be invoked from the EFI boot service ConnectController().
As a result, much of the error checking on the parameters to Start() has been moved into this
common boot service. It is legal to call Start() from other locations,
but the following calling restrictions must be followed or the system behavior will not be deterministic.
1. ControllerHandle must be a valid EFI_HANDLE.
2. If RemainingDevicePath is not NULL, then it must be a pointer to a naturally aligned
EFI_DEVICE_PATH_PROTOCOL.
3. Prior to calling Start(), the Supported() function for the driver specified by This must
have been called with the same calling parameters, and Supported() must have returned EFI_SUCCESS.
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
@param[in] ControllerHandle The handle of the controller to start. This handle
must support a protocol interface that supplies
an I/O abstraction to the driver.
@param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
parameter is ignored by device drivers, and is optional for bus
drivers. For a bus driver, if this parameter is NULL, then handles
for all the children of Controller are created by this driver.
If this parameter is not NULL and the first Device Path Node is
not the End of Device Path Node, then only the handle for the
child device specified by the first Device Path Node of
RemainingDevicePath is created by this driver.
If the first Device Path Node of RemainingDevicePath is
the End of Device Path Node, no child handle is created by this
driver.
@retval EFI_SUCCESS The device was started.
@retval EFI_DEVICE_ERROR The device could not be started due to a device error.Currently not implemented.
@retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
@retval Others The driver failded to start the device.
**/
EFI_STATUS
EFIAPI
NvmExpressDriverBindingStart (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath
)
{
EFI_STATUS Status;
EFI_PCI_IO_PROTOCOL *PciIo;
NVME_CONTROLLER_PRIVATE_DATA *Private;
EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath;
UINT32 NamespaceId;
EFI_PHYSICAL_ADDRESS MappedAddr;
UINTN Bytes;
EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL *Passthru;
DEBUG ((EFI_D_INFO, "NvmExpressDriverBindingStart: start\n"));
Private = NULL;
Passthru = NULL;
ParentDevicePath = NULL;
Status = gBS->OpenProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
(VOID **) &ParentDevicePath,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if ((EFI_ERROR (Status)) && (Status != EFI_ALREADY_STARTED)) {
return Status;
}
Status = gBS->OpenProtocol (
Controller,
&gEfiPciIoProtocolGuid,
(VOID **) &PciIo,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
);
if (EFI_ERROR (Status) && (Status != EFI_ALREADY_STARTED)) {
return Status;
}
//
// Check EFI_ALREADY_STARTED to reuse the original NVME_CONTROLLER_PRIVATE_DATA.
//
if (Status != EFI_ALREADY_STARTED) {
Private = AllocateZeroPool (sizeof (NVME_CONTROLLER_PRIVATE_DATA));
if (Private == NULL) {
DEBUG ((EFI_D_ERROR, "NvmExpressDriverBindingStart: allocating pool for Nvme Private Data failed!\n"));
Status = EFI_OUT_OF_RESOURCES;
goto Exit;
}
//
// 6 x 4kB aligned buffers will be carved out of this buffer.
// 1st 4kB boundary is the start of the admin submission queue.
// 2nd 4kB boundary is the start of the admin completion queue.
// 3rd 4kB boundary is the start of I/O submission queue #1.
// 4th 4kB boundary is the start of I/O completion queue #1.
// 5th 4kB boundary is the start of I/O submission queue #2.
// 6th 4kB boundary is the start of I/O completion queue #2.
//
// Allocate 6 pages of memory, then map it for bus master read and write.
//
Status = PciIo->AllocateBuffer (
PciIo,
AllocateAnyPages,
EfiBootServicesData,
6,
(VOID**)&Private->Buffer,
0
);
if (EFI_ERROR (Status)) {
goto Exit;
}
Bytes = EFI_PAGES_TO_SIZE (6);
Status = PciIo->Map (
PciIo,
EfiPciIoOperationBusMasterCommonBuffer,
Private->Buffer,
&Bytes,
&MappedAddr,
&Private->Mapping
);
if (EFI_ERROR (Status) || (Bytes != EFI_PAGES_TO_SIZE (6))) {
goto Exit;
}
Private->BufferPciAddr = (UINT8 *)(UINTN)MappedAddr;
Private->Signature = NVME_CONTROLLER_PRIVATE_DATA_SIGNATURE;
Private->ControllerHandle = Controller;
Private->ImageHandle = This->DriverBindingHandle;
Private->DriverBindingHandle = This->DriverBindingHandle;
Private->PciIo = PciIo;
Private->ParentDevicePath = ParentDevicePath;
Private->Passthru.Mode = &Private->PassThruMode;
Private->Passthru.PassThru = NvmExpressPassThru;
Private->Passthru.GetNextNamespace = NvmExpressGetNextNamespace;
Private->Passthru.BuildDevicePath = NvmExpressBuildDevicePath;
Private->Passthru.GetNamespace = NvmExpressGetNamespace;
CopyMem (&Private->PassThruMode, &gEfiNvmExpressPassThruMode, sizeof (EFI_NVM_EXPRESS_PASS_THRU_MODE));
InitializeListHead (&Private->AsyncPassThruQueue);
InitializeListHead (&Private->UnsubmittedSubtasks);
Status = NvmeControllerInit (Private);
if (EFI_ERROR(Status)) {
goto Exit;
}
//
// Start the asynchronous I/O completion monitor
//
Status = gBS->CreateEvent (
EVT_TIMER | EVT_NOTIFY_SIGNAL,
TPL_NOTIFY,
ProcessAsyncTaskList,
Private,
&Private->TimerEvent
);
if (EFI_ERROR (Status)) {
goto Exit;
}
Status = gBS->SetTimer (
Private->TimerEvent,
TimerPeriodic,
NVME_HC_ASYNC_TIMER
);
if (EFI_ERROR (Status)) {
goto Exit;
}
Status = gBS->InstallMultipleProtocolInterfaces (
&Controller,
&gEfiNvmExpressPassThruProtocolGuid,
&Private->Passthru,
NULL
);
if (EFI_ERROR (Status)) {
goto Exit;
}
NvmeRegisterShutdownNotification ();
} else {
Status = gBS->OpenProtocol (
Controller,
&gEfiNvmExpressPassThruProtocolGuid,
(VOID **) &Passthru,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
if (EFI_ERROR (Status)) {
goto Exit;
}
Private = NVME_CONTROLLER_PRIVATE_DATA_FROM_PASS_THRU (Passthru);
}
if (RemainingDevicePath == NULL) {
//
// Enumerate all NVME namespaces in the controller
//
Status = DiscoverAllNamespaces (
Private
);
} else if (!IsDevicePathEnd (RemainingDevicePath)) {
//
// Enumerate the specified NVME namespace
//
Status = Private->Passthru.GetNamespace (
&Private->Passthru,
RemainingDevicePath,
&NamespaceId
);
if (!EFI_ERROR (Status)) {
Status = EnumerateNvmeDevNamespace (
Private,
NamespaceId
);
}
}
DEBUG ((EFI_D_INFO, "NvmExpressDriverBindingStart: end successfully\n"));
return EFI_SUCCESS;
Exit:
if ((Private != NULL) && (Private->Mapping != NULL)) {
PciIo->Unmap (PciIo, Private->Mapping);
}
if ((Private != NULL) && (Private->Buffer != NULL)) {
PciIo->FreeBuffer (PciIo, 6, Private->Buffer);
}
if ((Private != NULL) && (Private->ControllerData != NULL)) {
FreePool (Private->ControllerData);
}
if (Private != NULL) {
if (Private->TimerEvent != NULL) {
gBS->CloseEvent (Private->TimerEvent);
}
FreePool (Private);
}
gBS->CloseProtocol (
Controller,
&gEfiPciIoProtocolGuid,
This->DriverBindingHandle,
Controller
);
gBS->CloseProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
This->DriverBindingHandle,
Controller
);
DEBUG ((EFI_D_INFO, "NvmExpressDriverBindingStart: end with %r\n", Status));
return Status;
}
/**
Stops a device controller or a bus controller.
The Stop() function is designed to be invoked from the EFI boot service DisconnectController().
As a result, much of the error checking on the parameters to Stop() has been moved
into this common boot service. It is legal to call Stop() from other locations,
but the following calling restrictions must be followed or the system behavior will not be deterministic.
1. ControllerHandle must be a valid EFI_HANDLE that was used on a previous call to this
same driver's Start() function.
2. The first NumberOfChildren handles of ChildHandleBuffer must all be a valid
EFI_HANDLE. In addition, all of these handles must have been created in this driver's
Start() function, and the Start() function must have called OpenProtocol() on
ControllerHandle with an Attribute of EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
@param[in] ControllerHandle A handle to the device being stopped. The handle must
support a bus specific I/O protocol for the driver
to use to stop the device.
@param[in] NumberOfChildren The number of child device handles in ChildHandleBuffer.
@param[in] ChildHandleBuffer An array of child handles to be freed. May be NULL
if NumberOfChildren is 0.
@retval EFI_SUCCESS The device was stopped.
@retval EFI_DEVICE_ERROR The device could not be stopped due to a device error.
**/
EFI_STATUS
EFIAPI
NvmExpressDriverBindingStop (
IN EFI_DRIVER_BINDING_PROTOCOL *This,
IN EFI_HANDLE Controller,
IN UINTN NumberOfChildren,
IN EFI_HANDLE *ChildHandleBuffer
)
{
EFI_STATUS Status;
BOOLEAN AllChildrenStopped;
UINTN Index;
NVME_CONTROLLER_PRIVATE_DATA *Private;
EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL *PassThru;
BOOLEAN IsEmpty;
EFI_TPL OldTpl;
if (NumberOfChildren == 0) {
Status = gBS->OpenProtocol (
Controller,
&gEfiNvmExpressPassThruProtocolGuid,
(VOID **) &PassThru,
This->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
if (!EFI_ERROR (Status)) {
Private = NVME_CONTROLLER_PRIVATE_DATA_FROM_PASS_THRU (PassThru);
//
// Wait for the asynchronous PassThru queue to become empty.
//
while (TRUE) {
OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
IsEmpty = IsListEmpty (&Private->AsyncPassThruQueue) &&
IsListEmpty (&Private->UnsubmittedSubtasks);
gBS->RestoreTPL (OldTpl);
if (IsEmpty) {
break;
}
gBS->Stall (100);
}
gBS->UninstallMultipleProtocolInterfaces (
Controller,
&gEfiNvmExpressPassThruProtocolGuid,
PassThru,
NULL
);
if (Private->TimerEvent != NULL) {
gBS->CloseEvent (Private->TimerEvent);
}
if (Private->Mapping != NULL) {
Private->PciIo->Unmap (Private->PciIo, Private->Mapping);
}
if (Private->Buffer != NULL) {
Private->PciIo->FreeBuffer (Private->PciIo, 6, Private->Buffer);
}
FreePool (Private->ControllerData);
FreePool (Private);
}
gBS->CloseProtocol (
Controller,
&gEfiPciIoProtocolGuid,
This->DriverBindingHandle,
Controller
);
gBS->CloseProtocol (
Controller,
&gEfiDevicePathProtocolGuid,
This->DriverBindingHandle,
Controller
);
NvmeUnregisterShutdownNotification ();
return EFI_SUCCESS;
}
AllChildrenStopped = TRUE;
for (Index = 0; Index < NumberOfChildren; Index++) {
Status = UnregisterNvmeNamespace (This, Controller, ChildHandleBuffer[Index]);
if (EFI_ERROR (Status)) {
AllChildrenStopped = FALSE;
}
}
if (!AllChildrenStopped) {
return EFI_DEVICE_ERROR;
}
return EFI_SUCCESS;
}
/**
Used to retrieve the next namespace ID for this NVM Express controller.
The EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL.GetNextNamespace() function retrieves the next valid
namespace ID on this NVM Express controller.
If on input the value pointed to by NamespaceId is 0xFFFFFFFF, then the first valid namespace
ID defined on the NVM Express controller is returned in the location pointed to by NamespaceId
and a status of EFI_SUCCESS is returned.
If on input the value pointed to by NamespaceId is an invalid namespace ID other than 0xFFFFFFFF,
then EFI_INVALID_PARAMETER is returned.
If on input the value pointed to by NamespaceId is a valid namespace ID, then the next valid
namespace ID on the NVM Express controller is returned in the location pointed to by NamespaceId,
and EFI_SUCCESS is returned.
If the value pointed to by NamespaceId is the namespace ID of the last namespace on the NVM
Express controller, then EFI_NOT_FOUND is returned.
@param[in] This A pointer to the EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL instance.
@param[in,out] NamespaceId On input, a pointer to a legal NamespaceId for an NVM Express
namespace present on the NVM Express controller. On output, a
pointer to the next NamespaceId of an NVM Express namespace on
an NVM Express controller. An input value of 0xFFFFFFFF retrieves
the first NamespaceId for an NVM Express namespace present on an
NVM Express controller.
@retval EFI_SUCCESS The Namespace ID of the next Namespace was returned.
@retval EFI_NOT_FOUND There are no more namespaces defined on this controller.
@retval EFI_INVALID_PARAMETER NamespaceId is an invalid value other than 0xFFFFFFFF.
**/
EFI_STATUS
EFIAPI
NvmExpressGetNextNamespace (
IN EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL *This,
IN OUT UINT32 *NamespaceId
)
{
NVME_CONTROLLER_PRIVATE_DATA *Private;
NVME_ADMIN_NAMESPACE_DATA *NamespaceData;
UINT32 NextNamespaceId;
EFI_STATUS Status;
if ((This == NULL) || (NamespaceId == NULL)) {
return EFI_INVALID_PARAMETER;
}
NamespaceData = NULL;
Status = EFI_NOT_FOUND;
Private = NVME_CONTROLLER_PRIVATE_DATA_FROM_PASS_THRU (This);
//
// If the NamespaceId input value is 0xFFFFFFFF, then get the first valid namespace ID
//
if (*NamespaceId == 0xFFFFFFFF) {
//
// Start with the first namespace ID
//
NextNamespaceId = 1;
//
// Allocate buffer for Identify Namespace data.
//
NamespaceData = (NVME_ADMIN_NAMESPACE_DATA *)AllocateZeroPool (sizeof (NVME_ADMIN_NAMESPACE_DATA));
if (NamespaceData == NULL) {
return EFI_NOT_FOUND;
}
Status = NvmeIdentifyNamespace (Private, NextNamespaceId, NamespaceData);
if (EFI_ERROR(Status)) {
goto Done;
}
*NamespaceId = NextNamespaceId;
} else {
if (*NamespaceId > Private->ControllerData->Nn) {
return EFI_INVALID_PARAMETER;
}
NextNamespaceId = *NamespaceId + 1;
if (NextNamespaceId > Private->ControllerData->Nn) {
return EFI_NOT_FOUND;
}
//
// Allocate buffer for Identify Namespace data.
//
NamespaceData = (NVME_ADMIN_NAMESPACE_DATA *)AllocateZeroPool (sizeof (NVME_ADMIN_NAMESPACE_DATA));
if (NamespaceData == NULL) {
return EFI_NOT_FOUND;
}
Status = NvmeIdentifyNamespace (Private, NextNamespaceId, NamespaceData);
if (EFI_ERROR(Status)) {
goto Done;
}
*NamespaceId = NextNamespaceId;
}
Done:
if (NamespaceData != NULL) {
FreePool(NamespaceData);
}
return Status;
}
/**
Sends an NVM Express Command Packet to an NVM Express controller or namespace. This function supports
both blocking I/O and non-blocking I/O. The blocking I/O functionality is required, and the non-blocking
I/O functionality is optional.
@param[in] This A pointer to the EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL instance.
@param[in] NamespaceId A 32 bit namespace ID as defined in the NVMe specification to which the NVM Express Command
Packet will be sent. A value of 0 denotes the NVM Express controller, a value of all 0xFF's
(all bytes are 0xFF) in the namespace ID specifies that the command packet should be sent to
all valid namespaces.
@param[in,out] Packet A pointer to the NVM Express Command Packet.
@param[in] Event If non-blocking I/O is not supported then Event is ignored, and blocking I/O is performed.
If Event is NULL, then blocking I/O is performed. If Event is not NULL and non-blocking I/O
is supported, then non-blocking I/O is performed, and Event will be signaled when the NVM
Express Command Packet completes.
@retval EFI_SUCCESS The NVM Express Command Packet was sent by the host. TransferLength bytes were transferred
to, or from DataBuffer.
@retval EFI_BAD_BUFFER_SIZE The NVM Express Command Packet was not executed. The number of bytes that could be transferred
is returned in TransferLength.
@retval EFI_NOT_READY The NVM Express Command Packet could not be sent because the controller is not ready. The caller
may retry again later.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to send the NVM Express Command Packet.
@retval EFI_INVALID_PARAMETER NamespaceId or the contents of EFI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET are invalid. The NVM
Express Command Packet was not sent, so no additional status information is available.
@retval EFI_UNSUPPORTED The command described by the NVM Express Command Packet is not supported by the NVM Express
controller. The NVM Express Command Packet was not sent so no additional status information
is available.
@retval EFI_TIMEOUT A timeout occurred while waiting for the NVM Express Command Packet to execute.
**/
EFI_STATUS
EFIAPI
NvmExpressPassThru (
IN EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL *This,
IN UINT32 NamespaceId,
IN OUT EFI_NVM_EXPRESS_PASS_THRU_COMMAND_PACKET *Packet,
IN EFI_EVENT Event OPTIONAL
)
{
NVME_CONTROLLER_PRIVATE_DATA *Private;
EFI_STATUS Status;
EFI_PCI_IO_PROTOCOL *PciIo;
NVME_SQ *Sq;
NVME_CQ *Cq;
UINT16 QueueId;
UINT32 Bytes;
UINT16 Offset;
EFI_EVENT TimerEvent;
EFI_PCI_IO_PROTOCOL_OPERATION Flag;
EFI_PHYSICAL_ADDRESS PhyAddr;
VOID *MapData;
VOID *MapMeta;
VOID *MapPrpList;
UINTN MapLength;
UINT64 *Prp;
VOID *PrpListHost;
UINTN PrpListNo;
UINT32 Attributes;
UINT32 IoAlign;
UINT32 MaxTransLen;
UINT32 Data;
NVME_PASS_THRU_ASYNC_REQ *AsyncRequest;
EFI_TPL OldTpl;
//
// check the data fields in Packet parameter.
//
if ((This == NULL) || (Packet == NULL)) {
return EFI_INVALID_PARAMETER;
}
if ((Packet->NvmeCmd == NULL) || (Packet->NvmeCompletion == NULL)) {
return EFI_INVALID_PARAMETER;
}
if (Packet->QueueType != NVME_ADMIN_QUEUE && Packet->QueueType != NVME_IO_QUEUE) {
return EFI_INVALID_PARAMETER;
}
//
// 'Attributes' with neither EFI_NVM_EXPRESS_PASS_THRU_ATTRIBUTES_LOGICAL nor
// EFI_NVM_EXPRESS_PASS_THRU_ATTRIBUTES_PHYSICAL set is an illegal
// configuration.
//
Attributes = This->Mode->Attributes;
if ((Attributes & (EFI_NVM_EXPRESS_PASS_THRU_ATTRIBUTES_PHYSICAL |
EFI_NVM_EXPRESS_PASS_THRU_ATTRIBUTES_LOGICAL)) == 0) {
return EFI_INVALID_PARAMETER;
}
//
// Buffer alignment check for TransferBuffer & MetadataBuffer.
//
IoAlign = This->Mode->IoAlign;
if (IoAlign > 0 && (((UINTN) Packet->TransferBuffer & (IoAlign - 1)) != 0)) {
return EFI_INVALID_PARAMETER;
}
if (IoAlign > 0 && (((UINTN) Packet->MetadataBuffer & (IoAlign - 1)) != 0)) {
return EFI_INVALID_PARAMETER;
}
Private = NVME_CONTROLLER_PRIVATE_DATA_FROM_PASS_THRU (This);
//
// Check NamespaceId is valid or not.
//
if ((NamespaceId > Private->ControllerData->Nn) &&
(NamespaceId != (UINT32) -1)) {
return EFI_INVALID_PARAMETER;
}
//
// Check whether TransferLength exceeds the maximum data transfer size.
//
if (Private->ControllerData->Mdts != 0) {
MaxTransLen = (1 << (Private->ControllerData->Mdts)) *
(1 << (Private->Cap.Mpsmin + 12));
if (Packet->TransferLength > MaxTransLen) {
Packet->TransferLength = MaxTransLen;
return EFI_BAD_BUFFER_SIZE;
}
}
PciIo = Private->PciIo;
MapData = NULL;
MapMeta = NULL;
MapPrpList = NULL;
PrpListHost = NULL;
PrpListNo = 0;
Prp = NULL;
TimerEvent = NULL;
Status = EFI_SUCCESS;
if (Packet->QueueType == NVME_ADMIN_QUEUE) {
QueueId = 0;
} else {
if (Event == NULL) {
QueueId = 1;
} else {
QueueId = 2;
//
// Submission queue full check.
//
if ((Private->SqTdbl[QueueId].Sqt + 1) % (NVME_ASYNC_CSQ_SIZE + 1) ==
Private->AsyncSqHead) {
return EFI_NOT_READY;
}
}
}
Sq = Private->SqBuffer[QueueId] + Private->SqTdbl[QueueId].Sqt;
Cq = Private->CqBuffer[QueueId] + Private->CqHdbl[QueueId].Cqh;
if (Packet->NvmeCmd->Nsid != NamespaceId) {
return EFI_INVALID_PARAMETER;
}
ZeroMem (Sq, sizeof (NVME_SQ));
Sq->Opc = (UINT8)Packet->NvmeCmd->Cdw0.Opcode;
Sq->Fuse = (UINT8)Packet->NvmeCmd->Cdw0.FusedOperation;
Sq->Cid = Private->Cid[QueueId]++;
Sq->Nsid = Packet->NvmeCmd->Nsid;
//
// Currently we only support PRP for data transfer, SGL is NOT supported.
//
ASSERT (Sq->Psdt == 0);
if (Sq->Psdt != 0) {
DEBUG ((EFI_D_ERROR, "NvmExpressPassThru: doesn't support SGL mechanism\n"));
return EFI_UNSUPPORTED;
}
Sq->Prp[0] = (UINT64)(UINTN)Packet->TransferBuffer;
//
// If the NVMe cmd has data in or out, then mapping the user buffer to the PCI controller specific addresses.
// Note here we don't handle data buffer for CreateIOSubmitionQueue and CreateIOCompletionQueue cmds because
// these two cmds are special which requires their data buffer must support simultaneous access by both the
// processor and a PCI Bus Master. It's caller's responsbility to ensure this.
//
if (((Sq->Opc & (BIT0 | BIT1)) != 0) && (Sq->Opc != NVME_ADMIN_CRIOCQ_CMD) && (Sq->Opc != NVME_ADMIN_CRIOSQ_CMD)) {
if ((Packet->TransferLength == 0) || (Packet->TransferBuffer == NULL)) {
return EFI_INVALID_PARAMETER;
}
if ((Sq->Opc & BIT0) != 0) {
Flag = EfiPciIoOperationBusMasterRead;
} else {
Flag = EfiPciIoOperationBusMasterWrite;
}
MapLength = Packet->TransferLength;
Status = PciIo->Map (
PciIo,
Flag,
Packet->TransferBuffer,
&MapLength,
&PhyAddr,
&MapData
);
if (EFI_ERROR (Status) || (Packet->TransferLength != MapLength)) {
return EFI_OUT_OF_RESOURCES;
}
Sq->Prp[0] = PhyAddr;
Sq->Prp[1] = 0;
if((Packet->MetadataLength != 0) && (Packet->MetadataBuffer != NULL)) {
MapLength = Packet->MetadataLength;
Status = PciIo->Map (
PciIo,
Flag,
Packet->MetadataBuffer,
&MapLength,
&PhyAddr,
&MapMeta
);
if (EFI_ERROR (Status) || (Packet->MetadataLength != MapLength)) {
PciIo->Unmap (
PciIo,
MapData
);
return EFI_OUT_OF_RESOURCES;
}
Sq->Mptr = PhyAddr;
}
}
//
// If the buffer size spans more than two memory pages (page size as defined in CC.Mps),
// then build a PRP list in the second PRP submission queue entry.
//
Offset = ((UINT16)Sq->Prp[0]) & (EFI_PAGE_SIZE - 1);
Bytes = Packet->TransferLength;
if ((Offset + Bytes) > (EFI_PAGE_SIZE * 2)) {
//
// Create PrpList for remaining data buffer.
//
PhyAddr = (Sq->Prp[0] + EFI_PAGE_SIZE) & ~(EFI_PAGE_SIZE - 1);
Prp = NvmeCreatePrpList (PciIo, PhyAddr, EFI_SIZE_TO_PAGES(Offset + Bytes) - 1, &PrpListHost, &PrpListNo, &MapPrpList);
if (Prp == NULL) {
goto EXIT;
}
Sq->Prp[1] = (UINT64)(UINTN)Prp;
} else if ((Offset + Bytes) > EFI_PAGE_SIZE) {
Sq->Prp[1] = (Sq->Prp[0] + EFI_PAGE_SIZE) & ~(EFI_PAGE_SIZE - 1);
}
if(Packet->NvmeCmd->Flags & CDW2_VALID) {
Sq->Rsvd2 = (UINT64)Packet->NvmeCmd->Cdw2;
}
if(Packet->NvmeCmd->Flags & CDW3_VALID) {
Sq->Rsvd2 |= LShiftU64 ((UINT64)Packet->NvmeCmd->Cdw3, 32);
}
if(Packet->NvmeCmd->Flags & CDW10_VALID) {
Sq->Payload.Raw.Cdw10 = Packet->NvmeCmd->Cdw10;
}
if(Packet->NvmeCmd->Flags & CDW11_VALID) {
Sq->Payload.Raw.Cdw11 = Packet->NvmeCmd->Cdw11;
}
if(Packet->NvmeCmd->Flags & CDW12_VALID) {
Sq->Payload.Raw.Cdw12 = Packet->NvmeCmd->Cdw12;
}
if(Packet->NvmeCmd->Flags & CDW13_VALID) {
Sq->Payload.Raw.Cdw13 = Packet->NvmeCmd->Cdw13;
}
if(Packet->NvmeCmd->Flags & CDW14_VALID) {
Sq->Payload.Raw.Cdw14 = Packet->NvmeCmd->Cdw14;
}
if(Packet->NvmeCmd->Flags & CDW15_VALID) {
Sq->Payload.Raw.Cdw15 = Packet->NvmeCmd->Cdw15;
}
//
// Ring the submission queue doorbell.
//
if ((Event != NULL) && (QueueId != 0)) {
Private->SqTdbl[QueueId].Sqt =
(Private->SqTdbl[QueueId].Sqt + 1) % (NVME_ASYNC_CSQ_SIZE + 1);
} else {
Private->SqTdbl[QueueId].Sqt ^= 1;
}
Data = ReadUnaligned32 ((UINT32*)&Private->SqTdbl[QueueId]);
Status = PciIo->Mem.Write (
PciIo,
EfiPciIoWidthUint32,
NVME_BAR,
NVME_SQTDBL_OFFSET(QueueId, Private->Cap.Dstrd),
1,
&Data
);
if (EFI_ERROR (Status)) {
goto EXIT;
}
//
// For non-blocking requests, return directly if the command is placed
// in the submission queue.
//
if ((Event != NULL) && (QueueId != 0)) {
AsyncRequest = AllocateZeroPool (sizeof (NVME_PASS_THRU_ASYNC_REQ));
if (AsyncRequest == NULL) {
Status = EFI_DEVICE_ERROR;
goto EXIT;
}
AsyncRequest->Signature = NVME_PASS_THRU_ASYNC_REQ_SIG;
AsyncRequest->Packet = Packet;
AsyncRequest->CommandId = Sq->Cid;
AsyncRequest->CallerEvent = Event;
AsyncRequest->MapData = MapData;
AsyncRequest->MapMeta = MapMeta;
AsyncRequest->MapPrpList = MapPrpList;
AsyncRequest->PrpListNo = PrpListNo;
AsyncRequest->PrpListHost = PrpListHost;
OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
InsertTailList (&Private->AsyncPassThruQueue, &AsyncRequest->Link);
gBS->RestoreTPL (OldTpl);
return EFI_SUCCESS;
}
Status = gBS->CreateEvent (
EVT_TIMER,
TPL_CALLBACK,
NULL,
NULL,
&TimerEvent
);
if (EFI_ERROR (Status)) {
goto EXIT;
}
Status = gBS->SetTimer(TimerEvent, TimerRelative, Packet->CommandTimeout);
if (EFI_ERROR(Status)) {
goto EXIT;
}
//
// Wait for completion queue to get filled in.
//
Status = EFI_TIMEOUT;
while (EFI_ERROR (gBS->CheckEvent (TimerEvent))) {
if (Cq->Pt != Private->Pt[QueueId]) {
Status = EFI_SUCCESS;
break;
}
}
//
// Check the NVMe cmd execution result
//
if (Status != EFI_TIMEOUT) {
if ((Cq->Sct == 0) && (Cq->Sc == 0)) {
Status = EFI_SUCCESS;
} else {
Status = EFI_DEVICE_ERROR;
//
// Copy the Respose Queue entry for this command to the callers response buffer
//
CopyMem(Packet->NvmeCompletion, Cq, sizeof(EFI_NVM_EXPRESS_COMPLETION));
//
// Dump every completion entry status for debugging.
//
DEBUG_CODE_BEGIN();
NvmeDumpStatus(Cq);
DEBUG_CODE_END();
}
} else {
//
// Timeout occurs for an NVMe command. Reset the controller to abort the
// outstanding commands.
//
DEBUG ((DEBUG_ERROR, "NvmExpressPassThru: Timeout occurs for an NVMe command.\n"));
//
// Disable the timer to trigger the process of async transfers temporarily.
//
Status = gBS->SetTimer (Private->TimerEvent, TimerCancel, 0);
if (EFI_ERROR (Status)) {
goto EXIT;
}
//
// Reset the NVMe controller.
//
Status = NvmeControllerInit (Private);
if (!EFI_ERROR (Status)) {
Status = AbortAsyncPassThruTasks (Private);
if (!EFI_ERROR (Status)) {
//
// Re-enable the timer to trigger the process of async transfers.
//
Status = gBS->SetTimer (Private->TimerEvent, TimerPeriodic, NVME_HC_ASYNC_TIMER);
if (!EFI_ERROR (Status)) {
//
// Return EFI_TIMEOUT to indicate a timeout occurs for NVMe PassThru command.
//
Status = EFI_TIMEOUT;
}
}
} else {
Status = EFI_DEVICE_ERROR;
}
goto EXIT;
}
if ((Private->CqHdbl[QueueId].Cqh ^= 1) == 0) {
Private->Pt[QueueId] ^= 1;
}
Data = ReadUnaligned32 ((UINT32*)&Private->CqHdbl[QueueId]);
Status = PciIo->Mem.Write (
PciIo,
EfiPciIoWidthUint32,
NVME_BAR,
NVME_CQHDBL_OFFSET(QueueId, Private->Cap.Dstrd),
1,
&Data
);
//
// For now, the code does not support the non-blocking feature for admin queue.
// If Event is not NULL for admin queue, signal the caller's event here.
//
if (Event != NULL) {
ASSERT (QueueId == 0);
gBS->SignalEvent (Event);
}
EXIT:
if (MapData != NULL) {
PciIo->Unmap (
PciIo,
MapData
);
}
if (MapMeta != NULL) {
PciIo->Unmap (
PciIo,
MapMeta
);
}
if (MapPrpList != NULL) {
PciIo->Unmap (
PciIo,
MapPrpList
);
}
if (Prp != NULL) {
PciIo->FreeBuffer (PciIo, PrpListNo, PrpListHost);
}
if (TimerEvent != NULL) {
gBS->CloseEvent (TimerEvent);
}
return Status;
}
/**
Used to allocate and build a device path node for an NVM Express namespace on an NVM Express controller.
The EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL.BuildDevicePath() function allocates and builds a single device
path node for the NVM Express namespace specified by NamespaceId.
If the NamespaceId is not valid, then EFI_NOT_FOUND is returned.
If DevicePath is NULL, then EFI_INVALID_PARAMETER is returned.
If there are not enough resources to allocate the device path node, then EFI_OUT_OF_RESOURCES is returned.
Otherwise, DevicePath is allocated with the boot service AllocatePool(), the contents of DevicePath are
initialized to describe the NVM Express namespace specified by NamespaceId, and EFI_SUCCESS is returned.
@param[in] This A pointer to the EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL instance.
@param[in] NamespaceId The NVM Express namespace ID for which a device path node is to be
allocated and built. Caller must set the NamespaceId to zero if the
device path node will contain a valid UUID.
@param[in,out] DevicePath A pointer to a single device path node that describes the NVM Express
namespace specified by NamespaceId. This function is responsible for
allocating the buffer DevicePath with the boot service AllocatePool().
It is the caller's responsibility to free DevicePath when the caller
is finished with DevicePath.
@retval EFI_SUCCESS The device path node that describes the NVM Express namespace specified
by NamespaceId was allocated and returned in DevicePath.
@retval EFI_NOT_FOUND The NamespaceId is not valid.
@retval EFI_INVALID_PARAMETER DevicePath is NULL.
@retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate the DevicePath node.
**/
EFI_STATUS
EFIAPI
NvmExpressBuildDevicePath (
IN EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL *This,
IN UINT32 NamespaceId,
IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
)
{
NVME_NAMESPACE_DEVICE_PATH *Node;
NVME_CONTROLLER_PRIVATE_DATA *Private;
EFI_STATUS Status;
NVME_ADMIN_NAMESPACE_DATA *NamespaceData;
//
// Validate parameters
//
if ((This == NULL) || (DevicePath == NULL)) {
return EFI_INVALID_PARAMETER;
}
Status = EFI_SUCCESS;
Private = NVME_CONTROLLER_PRIVATE_DATA_FROM_PASS_THRU (This);
//
// Check NamespaceId is valid or not.
//
if ((NamespaceId == 0) ||
(NamespaceId > Private->ControllerData->Nn)) {
return EFI_NOT_FOUND;
}
Node = (NVME_NAMESPACE_DEVICE_PATH *)AllocateZeroPool (sizeof (NVME_NAMESPACE_DEVICE_PATH));
if (Node == NULL) {
return EFI_OUT_OF_RESOURCES;
}
Node->Header.Type = MESSAGING_DEVICE_PATH;
Node->Header.SubType = MSG_NVME_NAMESPACE_DP;
SetDevicePathNodeLength (&Node->Header, sizeof (NVME_NAMESPACE_DEVICE_PATH));
Node->NamespaceId = NamespaceId;
//
// Allocate a buffer for Identify Namespace data.
//
NamespaceData = NULL;
NamespaceData = AllocateZeroPool(sizeof (NVME_ADMIN_NAMESPACE_DATA));
if(NamespaceData == NULL) {
Status = EFI_OUT_OF_RESOURCES;
goto Exit;
}
//
// Get UUID from specified Identify Namespace data.
//
Status = NvmeIdentifyNamespace (
Private,
NamespaceId,
(VOID *)NamespaceData
);
if (EFI_ERROR(Status)) {
goto Exit;
}
Node->NamespaceUuid = NamespaceData->Eui64;
*DevicePath = (EFI_DEVICE_PATH_PROTOCOL *)Node;
Exit:
if(NamespaceData != NULL) {
FreePool (NamespaceData);
}
if (EFI_ERROR (Status)) {
FreePool (Node);
}
return Status;
}
