// retrieves the default user settings
void PREFERENCES::GetDefaultSettings()
{
TIniFile* storage = new TIniFile( ExtractFilePath( Application->ExeName ) + INIFILENAME_PREFERENCES );
try
{
UserLevel = storage->ReadInteger( "Various", "DefaultUserLevel", USERLEVEL_ADVANCED );
#define READ_SCRIPT( name ) \
if( !mCmdlineSpecified[ name ] ) \
Script[ name ] = storage->ReadString( "Scripts", #name, "" );
READ_SCRIPT( AfterModulesConnected );
READ_SCRIPT( OnExit );
READ_SCRIPT( OnSetConfig );
READ_SCRIPT( OnResume );
READ_SCRIPT( OnSuspend );
READ_SCRIPT( OnStart );
#define READ_BUTTON( number ) \
Buttons[ number ].Name = storage->ReadString( "Buttons", "Button" #number "Name", "" );\
Buttons[ number ].Cmd = storage->ReadString( "Buttons", "Button" #number "Cmd", "" );
READ_BUTTON( 1 );
READ_BUTTON( 2 );
READ_BUTTON( 3 );
READ_BUTTON( 4 );
}
catch(...) {}
delete storage;
}
void main(){
int temp1, temp2,temp3; // Bien duoc do ra tu EEPROM
int keypad[10],i, position;
int B_ENTER, B_EXIT, E0;
temp1 = read_eeprom(add_setup_temp_1);
temp2 = read_eeprom(add_setup_temp_2);
temp3 = read_eeprom(add_setup_temp_3);
nhietdo_setup = temp1*10 + temp2 + temp3*0.1; //Gia tri nhiet do setup
Output_low(LCD_RW);
LCD_Init();
TRISB = 0xFF;
TRISE = 0xFF;
LCD_PutCmd(0x01);
LCD_SetPosition(0x00); //Chuyen vi tri con tro sang dong 1
printf(lcd_putchar,"Setup: %.1f",nhietdo_setup);
lcd_putchar(223);
printf(lcd_putchar,"C");
while (true){
//Doc gia tri nhiet do tu cam bien DS18B20
temp_float = ds18b20_read();
LCD_SetPosition(0x40); //Chuyen vi tri con tro sang dong 2
printf(lcd_putchar,"Measure: %.1f",temp_float);
lcd_putchar(223);
printf(lcd_putchar,"C");
OF_RELAY(temp_float, nhietdo_setup);
E0 = input(SETUP_EXIT);
if (E0 == 0){
//while (input(SETUP_EXIT)==0) ;
LCD_PutCmd(0x01);
LCD_SetPosition(0x00);
printf(lcd_putchar,"SETUP TEMP: ");
delay_ms(1000);
i = 0;
position = 64;
//Khi chua nhan nut EXIT hay ENTER
B_EXIT = input(SETUP_EXIT);
B_ENTER = input(ENTER);
while ((B_ENTER==1) | (B_EXIT == 1)){
int value;
B_EXIT = input(SETUP_EXIT);
B_ENTER = input(ENTER);
value = READ_BUTTON();
//Chi cho nhap va hien thi 3 so
if ((value >= 0) && (value < 10) && (i<=2)){
LCD_SetPosition(position);
printf(lcd_putchar,"%d",value);
delay_ms(1000);
keypad[i] = value;
i++;
position++;
}
else
//Khi da nhap du 3 so va nhan nut ENTER
if ((value == 100) && (i>=3)){
write_eeprom(add_setup_temp_1,keypad[0]);
write_eeprom(add_setup_temp_2,keypad[1]);
write_eeprom(add_setup_temp_3,keypad[2]);
temp1 = read_eeprom(add_setup_temp_1);
temp2 = read_eeprom(add_setup_temp_2);
temp3 = read_eeprom(add_setup_temp_3);
nhietdo_setup = temp1*10 + temp2 + temp3*0.1; //Gia tri nhiet do setup
LCD_PutCmd(0x01);
LCD_SetPosition(0x00); //Chuyen vi tri con tro sang dong 1
printf(lcd_putchar,"Setup: %.1f",nhietdo_setup);
lcd_putchar(223);
printf(lcd_putchar,"C");
temp_float = ds18b20_read();
LCD_SetPosition(0x40); //Chuyen vi tri con tro sang dong 2
printf(lcd_putchar,"Measure: %.1f",temp_float);
lcd_putchar(223);
printf(lcd_putchar,"C");
break;
}
else
if (value == 50){ //Khi da nhan nut EXIT thi thoat khoi vong lap
LCD_PutCmd(0x01);
LCD_SetPosition(0x00); //Chuyen vi tri con tro sang dong 1
printf(lcd_putchar,"Setup: %.1f",nhietdo_setup);
lcd_putchar(223);
printf(lcd_putchar,"C");
temp_float = ds18b20_read();
LCD_SetPosition(0x40); //Chuyen vi tri con tro sang dong 2
printf(lcd_putchar,"Measure: %.1f",temp_float);
lcd_putchar(223);
printf(lcd_putchar,"C");
break;
}
}
}
}
}
