static int rs5c_set_alarm(struct device *dev, struct rtc_wkalrm *t)
{
struct i2c_client *client = to_i2c_client(dev);
struct rs5c372 *rs5c = i2c_get_clientdata(client);
int status, addr, i;
unsigned char buf[3];
if (t->time.tm_mday != -1
|| t->time.tm_mon != -1
|| t->time.tm_year != -1)
return -EINVAL;
status = rs5c_get_regs(rs5c);
if (status < 0)
return status;
if (rs5c->regs[RS5C_REG_CTRL1] & RS5C_CTRL1_AALE) {
addr = RS5C_ADDR(RS5C_REG_CTRL1);
buf[0] = rs5c->regs[RS5C_REG_CTRL1] & ~RS5C_CTRL1_AALE;
if (i2c_smbus_write_byte_data(client, addr, buf[0]) < 0) {
pr_debug("%s: can't disable alarm\n", rs5c->rtc->name);
return -EIO;
}
rs5c->regs[RS5C_REG_CTRL1] = buf[0];
}
buf[0] = bin2bcd(t->time.tm_min);
buf[1] = rs5c_hr2reg(rs5c, t->time.tm_hour);
buf[2] = 0x7f;
for (i = 0; i < sizeof(buf); i++) {
addr = RS5C_ADDR(RS5C_REG_ALARM_A_MIN + i);
if (i2c_smbus_write_byte_data(client, addr, buf[i]) < 0) {
pr_debug("%s: can't set alarm time\n", rs5c->rtc->name);
return -EIO;
}
}
if (t->enabled) {
addr = RS5C_ADDR(RS5C_REG_CTRL1);
buf[0] = rs5c->regs[RS5C_REG_CTRL1] | RS5C_CTRL1_AALE;
if (i2c_smbus_write_byte_data(client, addr, buf[0]) < 0)
printk(KERN_WARNING "%s: can't enable alarm\n",
rs5c->rtc->name);
rs5c->regs[RS5C_REG_CTRL1] = buf[0];
}
return 0;
}
static int rs5c_set_alarm(struct device *dev, struct rtc_wkalrm *t)
{
struct i2c_client *client = to_i2c_client(dev);
struct rs5c372 *rs5c = i2c_get_clientdata(client);
int status, addr, i;
unsigned char buf[3];
/* only handle up to 24 hours in the future, like RTC_ALM_SET */
if (t->time.tm_mday != -1
|| t->time.tm_mon != -1
|| t->time.tm_year != -1)
return -EINVAL;
/* REVISIT: round up tm_sec */
/* if needed, disable irq (clears pending status) */
status = rs5c_get_regs(rs5c);
if (status < 0)
return status;
if (rs5c->regs[RS5C_REG_CTRL1] & RS5C_CTRL1_AALE) {
addr = RS5C_ADDR(RS5C_REG_CTRL1);
buf[0] = rs5c->regs[RS5C_REG_CTRL1] & ~RS5C_CTRL1_AALE;
if (i2c_smbus_write_byte_data(client, addr, buf[0]) < 0) {
pr_debug("%s: can't disable alarm\n", rs5c->rtc->name);
return -EIO;
}
rs5c->regs[RS5C_REG_CTRL1] = buf[0];
}
/* set alarm */
buf[0] = bin2bcd(t->time.tm_min);
buf[1] = rs5c_hr2reg(rs5c, t->time.tm_hour);
buf[2] = 0x7f; /* any/all days */
for (i = 0; i < sizeof(buf); i++) {
addr = RS5C_ADDR(RS5C_REG_ALARM_A_MIN + i);
if (i2c_smbus_write_byte_data(client, addr, buf[i]) < 0) {
pr_debug("%s: can't set alarm time\n", rs5c->rtc->name);
return -EIO;
}
}
/* ... and maybe enable its irq */
if (t->enabled) {
addr = RS5C_ADDR(RS5C_REG_CTRL1);
buf[0] = rs5c->regs[RS5C_REG_CTRL1] | RS5C_CTRL1_AALE;
if (i2c_smbus_write_byte_data(client, addr, buf[0]) < 0)
printk(KERN_WARNING "%s: can't enable alarm\n",
rs5c->rtc->name);
rs5c->regs[RS5C_REG_CTRL1] = buf[0];
}
return 0;
}
static int rs5c_oscillator_setup(struct rs5c372 *rs5c372)
{
unsigned char buf[2];
int addr, i, ret = 0;
if (rs5c372->type == rtc_r2025sd) {
if (!(rs5c372->regs[RS5C_REG_CTRL2] & R2025_CTRL2_XST))
return ret;
rs5c372->regs[RS5C_REG_CTRL2] &= ~R2025_CTRL2_XST;
} else {
if (!(rs5c372->regs[RS5C_REG_CTRL2] & RS5C_CTRL2_XSTP))
return ret;
rs5c372->regs[RS5C_REG_CTRL2] &= ~RS5C_CTRL2_XSTP;
}
addr = RS5C_ADDR(RS5C_REG_CTRL1);
buf[0] = rs5c372->regs[RS5C_REG_CTRL1];
buf[1] = rs5c372->regs[RS5C_REG_CTRL2];
/* use 24hr mode */
switch (rs5c372->type) {
case rtc_rs5c372a:
case rtc_rs5c372b:
buf[1] |= RS5C372_CTRL2_24;
rs5c372->time24 = 1;
break;
case rtc_r2025sd:
case rtc_rv5c386:
case rtc_rv5c387a:
buf[0] |= RV5C387_CTRL1_24;
rs5c372->time24 = 1;
break;
default:
/* impossible */
break;
}
for (i = 0; i < sizeof(buf); i++) {
addr = RS5C_ADDR(RS5C_REG_CTRL1 + i);
ret = i2c_smbus_write_byte_data(rs5c372->client, addr, buf[i]);
if (unlikely(ret < 0))
return ret;
}
rs5c372->regs[RS5C_REG_CTRL1] = buf[0];
rs5c372->regs[RS5C_REG_CTRL2] = buf[1];
return 0;
}
static int rs5c_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
struct i2c_client *client = to_i2c_client(dev);
struct rs5c372 *rs5c = i2c_get_clientdata(client);
unsigned char buf;
int status, addr;
buf = rs5c->regs[RS5C_REG_CTRL1];
if (!rs5c->has_irq)
return -EINVAL;
status = rs5c_get_regs(rs5c);
if (status < 0)
return status;
addr = RS5C_ADDR(RS5C_REG_CTRL1);
if (enabled)
buf |= RS5C_CTRL1_AALE;
else
buf &= ~RS5C_CTRL1_AALE;
if (i2c_smbus_write_byte_data(client, addr, buf) < 0) {
printk(KERN_WARNING "%s: can't update alarm\n",
rs5c->rtc->name);
status = -EIO;
} else
rs5c->regs[RS5C_REG_CTRL1] = buf;
return status;
}
static int rs5c372_set_datetime(struct i2c_client *client, struct rtc_time *tm)
{
struct rs5c372 *rs5c = i2c_get_clientdata(client);
unsigned char buf[7];
int addr;
dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d "
"mday=%d, mon=%d, year=%d, wday=%d\n",
__func__,
tm->tm_sec, tm->tm_min, tm->tm_hour,
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
addr = RS5C_ADDR(RS5C372_REG_SECS);
buf[0] = bin2bcd(tm->tm_sec);
buf[1] = bin2bcd(tm->tm_min);
buf[2] = rs5c_hr2reg(rs5c, tm->tm_hour);
buf[3] = bin2bcd(tm->tm_wday);
buf[4] = bin2bcd(tm->tm_mday);
buf[5] = bin2bcd(tm->tm_mon + 1);
buf[6] = bin2bcd(tm->tm_year - 100);
if (i2c_smbus_write_i2c_block_data(client, addr, sizeof(buf), buf) < 0) {
dev_err(&client->dev, "%s: write error\n", __func__);
return -EIO;
}
return 0;
}
static int rs5c372_set_datetime(struct i2c_client *client, struct rtc_time *tm)
{
struct rs5c372 *rs5c = i2c_get_clientdata(client);
unsigned char buf[8];
dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d "
"mday=%d, mon=%d, year=%d, wday=%d\n",
__FUNCTION__,
tm->tm_sec, tm->tm_min, tm->tm_hour,
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
buf[0] = RS5C_ADDR(RS5C372_REG_SECS);
buf[1] = BIN2BCD(tm->tm_sec);
buf[2] = BIN2BCD(tm->tm_min);
buf[3] = rs5c_hr2reg(rs5c, tm->tm_hour);
buf[4] = BIN2BCD(tm->tm_wday);
buf[5] = BIN2BCD(tm->tm_mday);
buf[6] = BIN2BCD(tm->tm_mon + 1);
buf[7] = BIN2BCD(tm->tm_year - 100);
if ((i2c_master_send(client, buf, 8)) != 8) {
dev_err(&client->dev, "%s: write error\n", __FUNCTION__);
return -EIO;
}
return 0;
}
static int rs5c_get_regs(struct rs5c372 *rs5c)
{
struct i2c_client *client = rs5c->client;
struct i2c_msg msgs[] = {
{ client->addr, I2C_M_RD, sizeof rs5c->buf, rs5c->buf },
};
if (rs5c->smbus) {
int addr = RS5C_ADDR(RS5C372_REG_SECS);
int size = sizeof(rs5c->buf) - 1;
if (i2c_smbus_read_i2c_block_data(client, addr, size,
rs5c->buf + 1) != size) {
dev_warn(&client->dev, "can't read registers\n");
return -EIO;
}
} else {
if ((i2c_transfer(client->adapter, msgs, 1)) != 1) {
dev_warn(&client->dev, "can't read registers\n");
return -EIO;
}
}
dev_dbg(&client->dev,
"%02x %02x %02x (%02x) %02x %02x %02x (%02x), "
"%02x %02x %02x, %02x %02x %02x; %02x %02x\n",
rs5c->regs[0], rs5c->regs[1], rs5c->regs[2], rs5c->regs[3],
rs5c->regs[4], rs5c->regs[5], rs5c->regs[6], rs5c->regs[7],
rs5c->regs[8], rs5c->regs[9], rs5c->regs[10], rs5c->regs[11],
rs5c->regs[12], rs5c->regs[13], rs5c->regs[14], rs5c->regs[15]);
return 0;
}
static int
rs5c_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
{
struct i2c_client *client = to_i2c_client(dev);
struct rs5c372 *rs5c = i2c_get_clientdata(client);
unsigned char buf;
int status, addr;
buf = rs5c->regs[RS5C_REG_CTRL1];
switch (cmd) {
case RTC_UIE_OFF:
case RTC_UIE_ON:
/* some 327a modes use a different IRQ pin for 1Hz irqs */
if (rs5c->type == rtc_rs5c372a
&& (buf & RS5C372A_CTRL1_SL1))
return -ENOIOCTLCMD;
case RTC_AIE_OFF:
case RTC_AIE_ON:
/* these irq management calls only make sense for chips
* which are wired up to an IRQ.
*/
if (!rs5c->has_irq)
return -ENOIOCTLCMD;
break;
default:
return -ENOIOCTLCMD;
}
status = rs5c_get_regs(rs5c);
if (status < 0)
return status;
addr = RS5C_ADDR(RS5C_REG_CTRL1);
switch (cmd) {
case RTC_AIE_OFF: /* alarm off */
buf &= ~RS5C_CTRL1_AALE;
break;
case RTC_AIE_ON: /* alarm on */
buf |= RS5C_CTRL1_AALE;
break;
case RTC_UIE_OFF: /* update off */
buf &= ~RS5C_CTRL1_CT_MASK;
break;
case RTC_UIE_ON: /* update on */
buf &= ~RS5C_CTRL1_CT_MASK;
buf |= RS5C_CTRL1_CT4;
break;
}
if (i2c_smbus_write_byte_data(client, addr, buf) < 0) {
printk(KERN_WARNING "%s: can't update alarm\n",
rs5c->rtc->name);
status = -EIO;
} else
rs5c->regs[RS5C_REG_CTRL1] = buf;
return status;
}
static int
rs5c_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
{
struct i2c_client *client = to_i2c_client(dev);
struct rs5c372 *rs5c = i2c_get_clientdata(client);
unsigned char buf;
int status, addr;
buf = rs5c->regs[RS5C_REG_CTRL1];
switch (cmd) {
case RTC_UIE_OFF:
case RTC_UIE_ON:
if (rs5c->type == rtc_rs5c372a
&& (buf & RS5C372A_CTRL1_SL1))
return -ENOIOCTLCMD;
case RTC_AIE_OFF:
case RTC_AIE_ON:
if (!rs5c->has_irq)
return -ENOIOCTLCMD;
break;
default:
return -ENOIOCTLCMD;
}
status = rs5c_get_regs(rs5c);
if (status < 0)
return status;
addr = RS5C_ADDR(RS5C_REG_CTRL1);
switch (cmd) {
case RTC_AIE_OFF:
buf &= ~RS5C_CTRL1_AALE;
break;
case RTC_AIE_ON:
buf |= RS5C_CTRL1_AALE;
break;
case RTC_UIE_OFF:
buf &= ~RS5C_CTRL1_CT_MASK;
break;
case RTC_UIE_ON:
buf &= ~RS5C_CTRL1_CT_MASK;
buf |= RS5C_CTRL1_CT4;
break;
}
if (i2c_smbus_write_byte_data(client, addr, buf) < 0) {
printk(KERN_WARNING "%s: can't update alarm\n",
rs5c->rtc->name);
status = -EIO;
} else
rs5c->regs[RS5C_REG_CTRL1] = buf;
return status;
}
static int rs5c_get_regs(struct rs5c372 *rs5c)
{
struct i2c_client *client = rs5c->client;
struct i2c_msg msgs[] = {
{ client->addr, I2C_M_RD, sizeof rs5c->buf, rs5c->buf },
};
/* This implements the third reading method from the datasheet, using
* an internal address that's reset after each transaction (by STOP)
* to 0x0f ... so we read extra registers, and skip the first one.
*
* The first method doesn't work with the iop3xx adapter driver, on at
* least 80219 chips; this works around that bug.
*
* The third method on the other hand doesn't work for the SMBus-only
* configurations, so we use the the first method there, stripping off
* the extra register in the process.
*/
if (rs5c->smbus) {
int addr = RS5C_ADDR(RS5C372_REG_SECS);
int size = sizeof(rs5c->buf) - 1;
if (i2c_smbus_read_i2c_block_data(client, addr, size,
rs5c->buf + 1) != size) {
dev_warn(&client->dev, "can't read registers\n");
return -EIO;
}
} else {
if ((i2c_transfer(client->adapter, msgs, 1)) != 1) {
dev_warn(&client->dev, "can't read registers\n");
return -EIO;
}
}
dev_dbg(&client->dev,
"%02x %02x %02x (%02x) %02x %02x %02x (%02x), "
"%02x %02x %02x, %02x %02x %02x; %02x %02x\n",
rs5c->regs[0], rs5c->regs[1], rs5c->regs[2], rs5c->regs[3],
rs5c->regs[4], rs5c->regs[5], rs5c->regs[6], rs5c->regs[7],
rs5c->regs[8], rs5c->regs[9], rs5c->regs[10], rs5c->regs[11],
rs5c->regs[12], rs5c->regs[13], rs5c->regs[14], rs5c->regs[15]);
return 0;
}
static int rs5c372_probe(struct i2c_adapter *adapter, int address, int kind)
{
int err = 0;
struct i2c_client *client;
struct rs5c372 *rs5c372;
struct rtc_time tm;
dev_dbg(adapter->class_dev.dev, "%s\n", __FUNCTION__);
if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) {
err = -ENODEV;
goto exit;
}
if (!(rs5c372 = kzalloc(sizeof(struct rs5c372), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
/* we read registers 0x0f then 0x00-0x0f; skip the first one */
rs5c372->regs=&rs5c372->buf[1];
/* On conversion to a "new style" i2c driver, we'll be handed
* the i2c_client (we won't create it)
*/
client = &rs5c372->dev;
rs5c372->client = client;
/* I2C client */
client->addr = address;
client->driver = &rs5c372_driver;
client->adapter = adapter;
strlcpy(client->name, rs5c372_driver.driver.name, I2C_NAME_SIZE);
i2c_set_clientdata(client, rs5c372);
/* Inform the i2c layer */
if ((err = i2c_attach_client(client)))
goto exit_kfree;
err = rs5c_get_regs(rs5c372);
if (err < 0)
goto exit_detach;
/* For "new style" drivers, irq is in i2c_client and chip type
* info comes from i2c_client.dev.platform_data. Meanwhile:
*
* STICK BOARD-SPECIFIC SETUP CODE RIGHT HERE
*/
if (rs5c372->type == rtc_undef) {
rs5c372->type = rtc_rs5c372b;
dev_warn(&client->dev, "assuming rs5c372b\n");
}
/* clock may be set for am/pm or 24 hr time */
switch (rs5c372->type) {
case rtc_rs5c372a:
case rtc_rs5c372b:
/* alarm uses ALARM_A; and nINTRA on 372a, nINTR on 372b.
* so does periodic irq, except some 327a modes.
*/
if (rs5c372->regs[RS5C_REG_CTRL2] & RS5C372_CTRL2_24)
rs5c372->time24 = 1;
break;
case rtc_rv5c386:
case rtc_rv5c387a:
if (rs5c372->regs[RS5C_REG_CTRL1] & RV5C387_CTRL1_24)
rs5c372->time24 = 1;
/* alarm uses ALARM_W; and nINTRB for alarm and periodic
* irq, on both 386 and 387
*/
break;
default:
dev_err(&client->dev, "unknown RTC type\n");
goto exit_detach;
}
/* if the oscillator lost power and no other software (like
* the bootloader) set it up, do it here.
*/
if (rs5c372->regs[RS5C_REG_CTRL2] & RS5C_CTRL2_XSTP) {
unsigned char buf[3];
rs5c372->regs[RS5C_REG_CTRL2] &= ~RS5C_CTRL2_XSTP;
buf[0] = RS5C_ADDR(RS5C_REG_CTRL1);
buf[1] = rs5c372->regs[RS5C_REG_CTRL1];
buf[2] = rs5c372->regs[RS5C_REG_CTRL2];
/* use 24hr mode */
switch (rs5c372->type) {
case rtc_rs5c372a:
case rtc_rs5c372b:
buf[2] |= RS5C372_CTRL2_24;
rs5c372->time24 = 1;
break;
case rtc_rv5c386:
case rtc_rv5c387a:
buf[1] |= RV5C387_CTRL1_24;
rs5c372->time24 = 1;
break;
default:
/* impossible */
break;
}
if ((i2c_master_send(client, buf, 3)) != 3) {
dev_err(&client->dev, "setup error\n");
goto exit_detach;
}
rs5c372->regs[RS5C_REG_CTRL1] = buf[1];
rs5c372->regs[RS5C_REG_CTRL2] = buf[2];
}
if (rs5c372_get_datetime(client, &tm) < 0)
dev_warn(&client->dev, "clock needs to be set\n");
dev_info(&client->dev, "%s found, %s, driver version " DRV_VERSION "\n",
({ char *s; switch (rs5c372->type) {
case rtc_rs5c372a: s = "rs5c372a"; break;
case rtc_rs5c372b: s = "rs5c372b"; break;
case rtc_rv5c386: s = "rv5c386"; break;
case rtc_rv5c387a: s = "rv5c387a"; break;
default: s = "chip"; break;
}; s;}),
static int rs5c372_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int err = 0;
struct rs5c372 *rs5c372;
struct rtc_time tm;
dev_dbg(&client->dev, "%s\n", __func__);
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
err = -ENODEV;
goto exit;
}
if (!(rs5c372 = kzalloc(sizeof(struct rs5c372), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
rs5c372->client = client;
i2c_set_clientdata(client, rs5c372);
rs5c372->type = id->driver_data;
/* we read registers 0x0f then 0x00-0x0f; skip the first one */
rs5c372->regs = &rs5c372->buf[1];
err = rs5c_get_regs(rs5c372);
if (err < 0)
goto exit_kfree;
/* clock may be set for am/pm or 24 hr time */
switch (rs5c372->type) {
case rtc_rs5c372a:
case rtc_rs5c372b:
/* alarm uses ALARM_A; and nINTRA on 372a, nINTR on 372b.
* so does periodic irq, except some 327a modes.
*/
if (rs5c372->regs[RS5C_REG_CTRL2] & RS5C372_CTRL2_24)
rs5c372->time24 = 1;
break;
case rtc_rv5c386:
case rtc_rv5c387a:
if (rs5c372->regs[RS5C_REG_CTRL1] & RV5C387_CTRL1_24)
rs5c372->time24 = 1;
/* alarm uses ALARM_W; and nINTRB for alarm and periodic
* irq, on both 386 and 387
*/
break;
default:
dev_err(&client->dev, "unknown RTC type\n");
goto exit_kfree;
}
/* if the oscillator lost power and no other software (like
* the bootloader) set it up, do it here.
*/
if (rs5c372->regs[RS5C_REG_CTRL2] & RS5C_CTRL2_XSTP) {
unsigned char buf[3];
rs5c372->regs[RS5C_REG_CTRL2] &= ~RS5C_CTRL2_XSTP;
buf[0] = RS5C_ADDR(RS5C_REG_CTRL1);
buf[1] = rs5c372->regs[RS5C_REG_CTRL1];
buf[2] = rs5c372->regs[RS5C_REG_CTRL2];
/* use 24hr mode */
switch (rs5c372->type) {
case rtc_rs5c372a:
case rtc_rs5c372b:
buf[2] |= RS5C372_CTRL2_24;
rs5c372->time24 = 1;
break;
case rtc_rv5c386:
case rtc_rv5c387a:
buf[1] |= RV5C387_CTRL1_24;
rs5c372->time24 = 1;
break;
default:
/* impossible */
break;
}
if ((i2c_master_send(client, buf, 3)) != 3) {
dev_err(&client->dev, "setup error\n");
goto exit_kfree;
}
rs5c372->regs[RS5C_REG_CTRL1] = buf[1];
rs5c372->regs[RS5C_REG_CTRL2] = buf[2];
}
if (rs5c372_get_datetime(client, &tm) < 0)
dev_warn(&client->dev, "clock needs to be set\n");
dev_info(&client->dev, "%s found, %s, driver version " DRV_VERSION "\n",
({ char *s; switch (rs5c372->type) {
case rtc_rs5c372a: s = "rs5c372a"; break;
case rtc_rs5c372b: s = "rs5c372b"; break;
case rtc_rv5c386: s = "rv5c386"; break;
case rtc_rv5c387a: s = "rv5c387a"; break;
default: s = "chip"; break;
}; s;}),