/*
==========================================================================
Description:
procedures on IEEE 802.11/1999 p.376
Parametrs:
==========================================================================
*/
static VOID ApCliAssocPostProc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR pAddr2,
IN USHORT CapabilityInfo,
IN USHORT IfIndex,
IN UCHAR SupRate[],
IN UCHAR SupRateLen,
IN UCHAR ExtRate[],
IN UCHAR ExtRateLen,
IN PEDCA_PARM pEdcaParm,
IN HT_CAPABILITY_IE *pHtCapability,
IN UCHAR HtCapabilityLen,
IN ADD_HT_INFO_IE *pAddHtInfo)
{
PAPCLI_STRUCT pApCliEntry = NULL;
if (IfIndex >= MAX_APCLI_NUM)
return;
pApCliEntry = &pAd->ApCfg.ApCliTab[IfIndex];
pApCliEntry->ApCliMlmeAux.BssType = BSS_INFRA;
pApCliEntry->ApCliMlmeAux.CapabilityInfo = CapabilityInfo & SUPPORTED_CAPABILITY_INFO;
NdisMoveMemory(&pApCliEntry->ApCliMlmeAux.APEdcaParm, pEdcaParm, sizeof(EDCA_PARM));
/* filter out un-supported rates */
pApCliEntry->ApCliMlmeAux.SupRateLen = SupRateLen;
NdisMoveMemory(pApCliEntry->ApCliMlmeAux.SupRate, SupRate, SupRateLen);
RTMPCheckRates(pAd, pApCliEntry->ApCliMlmeAux.SupRate, &(pApCliEntry->ApCliMlmeAux.SupRateLen));
/* filter out un-supported rates */
pApCliEntry->ApCliMlmeAux.ExtRateLen = ExtRateLen;
NdisMoveMemory(pApCliEntry->ApCliMlmeAux.ExtRate, ExtRate, ExtRateLen);
RTMPCheckRates(pAd, pApCliEntry->ApCliMlmeAux.ExtRate, &(pApCliEntry->ApCliMlmeAux.ExtRateLen));
DBGPRINT(RT_DEBUG_TRACE, (HtCapabilityLen ? "%s===> 11n HT STA\n" : "%s===> legacy STA\n", __FUNCTION__));
#ifdef DOT11_N_SUPPORT
if (HtCapabilityLen > 0 && (pAd->CommonCfg.PhyMode > PHY_11ABGN_MIXED))
{
ApCliCheckHt(pAd, IfIndex, pHtCapability, pAddHtInfo);
}
#endif /* DOT11_N_SUPPORT */
}
/*
==========================================================================
Description:
When waiting joining the (I)BSS, beacon received from external
==========================================================================
*/
static VOID ApCliPeerProbeRspAtJoinAction(
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem)
{
UCHAR Bssid[MAC_ADDR_LEN], Addr2[MAC_ADDR_LEN];
UCHAR /* Ssid[MAX_LEN_OF_SSID], */ SsidLen=0, BssType, Channel=0, MessageToMe,
DtimCount, DtimPeriod, BcastFlag;
UCHAR *Ssid = NULL;
LARGE_INTEGER TimeStamp;
USHORT BeaconPeriod, AtimWin, CapabilityInfo;
/* UINT FrameLen = 0; */
CF_PARM Cf;
UCHAR Erp;
UCHAR SupRate[MAX_LEN_OF_SUPPORTED_RATES], ExtRate[MAX_LEN_OF_SUPPORTED_RATES];
UCHAR SupRateLen, ExtRateLen;
UCHAR CkipFlag;
USHORT LenVIE;
UCHAR AironetCellPowerLimit;
EDCA_PARM EdcaParm;
QBSS_LOAD_PARM QbssLoad;
QOS_CAPABILITY_PARM QosCapability;
/* UCHAR VarIE[MAX_VIE_LEN]; // Total VIE length = MAX_VIE_LEN - -5 */
UCHAR *VarIE = NULL;
NDIS_802_11_VARIABLE_IEs *pVIE = NULL;
ULONG RalinkIe;
APCLI_CTRL_MSG_STRUCT ApCliCtrlMsg;
/* HT_CAPABILITY_IE HtCapability; */
/* ADD_HT_INFO_IE AddHtInfo; // AP might use this additional ht info IE */
HT_CAPABILITY_IE *pHtCapability = NULL;
ADD_HT_INFO_IE *pAddHtInfo = NULL; /* AP might use this additional ht info IE */
UCHAR HtCapabilityLen;
UCHAR AddHtInfoLen;
UCHAR NewChannel;
UCHAR NewExtChannelOffset = 0xff;
PAPCLI_STRUCT pApCliEntry = NULL;
#ifdef DOT11_N_SUPPORT
UCHAR CentralChannel;
#endif /* DOT11_N_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
UCHAR pPreNHtCapabilityLen = 0;
#endif /* CONFIG_STA_SUPPORT */
EXT_CAP_INFO_ELEMENT ExtCapInfo;
USHORT ifIndex = (USHORT)(Elem->Priv);
PULONG pCurrState = &pAd->ApCfg.ApCliTab[ifIndex].SyncCurrState;
if (ifIndex >= MAX_APCLI_NUM)
return;
/* allocate memory */
os_alloc_mem(NULL, (UCHAR **)&VarIE, MAX_VIE_LEN);
if (VarIE == NULL)
{
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
goto LabelErr;
}
os_alloc_mem(NULL, (UCHAR **)&pHtCapability, sizeof(HT_CAPABILITY_IE));
if (pHtCapability == NULL)
{
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
goto LabelErr;
}
os_alloc_mem(NULL, (UCHAR **)&pAddHtInfo, sizeof(ADD_HT_INFO_IE));
if (pAddHtInfo == NULL)
{
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
goto LabelErr;
}
os_alloc_mem(NULL, (UCHAR **)&Ssid, MAX_LEN_OF_SSID);
if (Ssid == NULL)
{
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
goto LabelErr;
}
/* Init Variable IE structure */
pVIE = (PNDIS_802_11_VARIABLE_IEs) VarIE;
pVIE->Length = 0;
RTMPZeroMemory(pHtCapability, sizeof(HT_CAPABILITY_IE));
RTMPZeroMemory(pAddHtInfo, sizeof(ADD_HT_INFO_IE));
RTMPZeroMemory(&QosCapability, sizeof(QosCapability));
RTMPZeroMemory(&EdcaParm, sizeof(EdcaParm));
if (PeerBeaconAndProbeRspSanity(pAd,
Elem->Msg,
Elem->MsgLen,
Elem->Channel,
Addr2,
Bssid,
(PCHAR) Ssid,
&SsidLen,
&BssType,
&BeaconPeriod,
&Channel,
&NewChannel,
&TimeStamp,
&Cf,
&AtimWin,
&CapabilityInfo,
&Erp,
&DtimCount,
&DtimPeriod,
&BcastFlag,
&MessageToMe,
SupRate,
&SupRateLen,
ExtRate,
&ExtRateLen,
&CkipFlag,
&AironetCellPowerLimit,
&EdcaParm,
&QbssLoad,
&QosCapability,
&RalinkIe,
&HtCapabilityLen,
#ifdef CONFIG_STA_SUPPORT
&pPreNHtCapabilityLen,
#endif /* CONFIG_STA_SUPPORT */
pHtCapability,
&ExtCapInfo,
&AddHtInfoLen,
pAddHtInfo,
&NewExtChannelOffset,
&LenVIE,
pVIE))
{
/*
BEACON from desired BSS/IBSS found. We should be able to decide most
BSS parameters here.
Q. But what happen if this JOIN doesn't conclude a successful ASSOCIATEION?
Do we need to receover back all parameters belonging to previous BSS?
A. Should be not. There's no back-door recover to previous AP. It still need
a new JOIN-AUTH-ASSOC sequence.
*/
INT ssidEqualFlag = FALSE;
INT ssidEmptyFlag = FALSE;
INT bssidEqualFlag = FALSE;
INT bssidEmptyFlag = FALSE;
INT matchFlag = FALSE;
pApCliEntry = &pAd->ApCfg.ApCliTab[ifIndex];
/* Check the Probe-Rsp's Bssid. */
if(!MAC_ADDR_EQUAL(pApCliEntry->CfgApCliBssid, ZERO_MAC_ADDR))
bssidEqualFlag = MAC_ADDR_EQUAL(pApCliEntry->CfgApCliBssid, Bssid);
else
bssidEmptyFlag = TRUE;
/* Check the Probe-Rsp's Ssid. */
if(pApCliEntry->CfgSsidLen != 0)
ssidEqualFlag = SSID_EQUAL(pApCliEntry->CfgSsid, pApCliEntry->CfgSsidLen, Ssid, SsidLen);
else
ssidEmptyFlag = TRUE;
/* bssid and ssid, Both match. */
if (bssidEqualFlag && ssidEqualFlag)
matchFlag = TRUE;
/* ssid match but bssid doesn't be indicate. */
else if(ssidEqualFlag && bssidEmptyFlag)
matchFlag = TRUE;
/* user doesn't indicate any bssid or ssid. AP-Clinet will auto pick a AP to join by most strong siganl strength. */
else if (bssidEmptyFlag && ssidEmptyFlag)
matchFlag = TRUE;
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - bssidEqualFlag=%d, ssidEqualFlag=%d, matchFlag=%d\n", bssidEqualFlag, ssidEqualFlag, matchFlag));
if (matchFlag)
{
/* Validate RSN IE if necessary, then copy store this information */
if ((LenVIE > 0)
#ifdef WSC_AP_SUPPORT
&& ((pAd->ApCfg.ApCliTab[ifIndex].WscControl.WscConfMode == WSC_DISABLE) ||
(pAd->ApCfg.ApCliTab[ifIndex].WscControl.bWscTrigger == FALSE))
#endif /* WSC_AP_SUPPORT */
)
{
if (ApCliValidateRSNIE(pAd, (PEID_STRUCT)pVIE, LenVIE, ifIndex))
{
pApCliEntry->ApCliMlmeAux.VarIELen = LenVIE;
NdisMoveMemory(pApCliEntry->ApCliMlmeAux.VarIEs, pVIE, pApCliEntry->ApCliMlmeAux.VarIELen);
}
else
{
/* ignore this response */
pApCliEntry->ApCliMlmeAux.VarIELen = 0;
DBGPRINT(RT_DEBUG_ERROR, ("ERROR: The RSN IE of this received Probe-resp is dis-match !!!!!!!!!! \n"));
goto LabelErr;
}
}
else
{
if (pApCliEntry->AuthMode >= Ndis802_11AuthModeWPA
#ifdef WSC_AP_SUPPORT
&& ((pAd->ApCfg.ApCliTab[ifIndex].WscControl.WscConfMode == WSC_DISABLE) ||
(pAd->ApCfg.ApCliTab[ifIndex].WscControl.bWscTrigger == FALSE))
#endif /* WSC_AP_SUPPORT */
)
{
/* ignore this response */
DBGPRINT(RT_DEBUG_ERROR, ("ERROR: The received Probe-resp has empty RSN IE !!!!!!!!!! \n"));
goto LabelErr;
}
pApCliEntry->ApCliMlmeAux.VarIELen = 0;
}
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - receive desired PROBE_RSP at JoinWaitProbeRsp... Channel = %d\n", Channel));
/* if the Bssid doesn't be indicated then you need to decide which AP to connect by most strong Rssi signal strength. */
if (bssidEqualFlag == FALSE)
{
/* caculate real rssi value. */
CHAR Rssi0 = ConvertToRssi(pAd, Elem->Rssi0, RSSI_0);
CHAR Rssi1 = ConvertToRssi(pAd, Elem->Rssi1, RSSI_1);
CHAR Rssi2 = ConvertToRssi(pAd, Elem->Rssi2, RSSI_2);
LONG RealRssi = (LONG)(RTMPMaxRssi(pAd, Rssi0, Rssi1, Rssi2));
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - previous Rssi = %ld current Rssi=%ld\n", pApCliEntry->ApCliMlmeAux.Rssi, (LONG)RealRssi));
if (pApCliEntry->ApCliMlmeAux.Rssi > (LONG)RealRssi)
goto LabelErr;
else
pApCliEntry->ApCliMlmeAux.Rssi = RealRssi;
} else
{
BOOLEAN Cancelled;
RTMPCancelTimer(&pApCliEntry->ApCliMlmeAux.ProbeTimer, &Cancelled);
}
NdisMoveMemory(pApCliEntry->ApCliMlmeAux.Ssid, Ssid, SsidLen);
pApCliEntry->ApCliMlmeAux.SsidLen = SsidLen;
NdisMoveMemory(pApCliEntry->ApCliMlmeAux.Bssid, Bssid, MAC_ADDR_LEN);
pApCliEntry->ApCliMlmeAux.CapabilityInfo = CapabilityInfo & SUPPORTED_CAPABILITY_INFO;
pApCliEntry->ApCliMlmeAux.BssType = BssType;
pApCliEntry->ApCliMlmeAux.BeaconPeriod = BeaconPeriod;
pApCliEntry->ApCliMlmeAux.Channel = Channel;
pApCliEntry->ApCliMlmeAux.AtimWin = AtimWin;
pApCliEntry->ApCliMlmeAux.CfpPeriod = Cf.CfpPeriod;
pApCliEntry->ApCliMlmeAux.CfpMaxDuration = Cf.CfpMaxDuration;
pApCliEntry->ApCliMlmeAux.APRalinkIe = RalinkIe;
/* Copy AP's supported rate to ApCliMlmeAux for creating assoication request */
/* Also filter out not supported rate */
pApCliEntry->ApCliMlmeAux.SupRateLen = SupRateLen;
NdisMoveMemory(pApCliEntry->ApCliMlmeAux.SupRate, SupRate, SupRateLen);
RTMPCheckRates(pAd, pApCliEntry->ApCliMlmeAux.SupRate, &(pApCliEntry->ApCliMlmeAux.SupRateLen));
pApCliEntry->ApCliMlmeAux.ExtRateLen = ExtRateLen;
NdisMoveMemory(pApCliEntry->ApCliMlmeAux.ExtRate, ExtRate, ExtRateLen);
RTMPCheckRates(pAd, pApCliEntry->ApCliMlmeAux.ExtRate, &pApCliEntry->ApCliMlmeAux.ExtRateLen);
#ifdef APCLI_CERT_SUPPORT
/* Get the ext capability info element */
if (pAd->bApCliCertTest == TRUE)
{
NdisMoveMemory(&pApCliEntry->ApCliMlmeAux.ExtCapInfo, &ExtCapInfo,sizeof(ExtCapInfo));
#ifdef DOT11_N_SUPPORT
#ifdef DOT11N_DRAFT3
DBGPRINT(RT_DEBUG_TRACE, ("\x1b[31m ApCliMlmeAux.ExtCapInfo=%d \x1b[m\n", pApCliEntry->ApCliMlmeAux.ExtCapInfo.BssCoexistMgmtSupport)); //zero debug 210121122
if (pAd->CommonCfg.bBssCoexEnable == TRUE)
pAd->CommonCfg.ExtCapIE.BssCoexistMgmtSupport = 1;
#endif /* DOT11N_DRAFT3 */
#endif /* DOT11_N_SUPPORT */
}
#endif /* APCLI_CERT_SUPPORT */
#ifdef DOT11_N_SUPPORT
NdisZeroMemory(pAd->ApCfg.ApCliTab[ifIndex].RxMcsSet,sizeof(pAd->ApCfg.ApCliTab[ifIndex].RxMcsSet));
/* filter out un-supported ht rates */
if ((HtCapabilityLen > 0) &&
(pApCliEntry->DesiredHtPhyInfo.bHtEnable) &&
(pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED))
{
RTMPZeroMemory(&(pApCliEntry->ApCliMlmeAux.HtCapability), SIZE_HT_CAP_IE);
pApCliEntry->ApCliMlmeAux.NewExtChannelOffset = NewExtChannelOffset;
pApCliEntry->ApCliMlmeAux.HtCapabilityLen = HtCapabilityLen;
ApCliCheckHt(pAd, ifIndex, pHtCapability, pAddHtInfo);
if (AddHtInfoLen > 0)
{
CentralChannel = pAddHtInfo->ControlChan;
/* Check again the Bandwidth capability of this AP. */
if ((pAddHtInfo->ControlChan > 2)&& (pAddHtInfo->AddHtInfo.ExtChanOffset == EXTCHA_BELOW) && (pHtCapability->HtCapInfo.ChannelWidth == BW_40))
{
CentralChannel = pAddHtInfo->ControlChan - 2;
}
else if ((pAddHtInfo->AddHtInfo.ExtChanOffset == EXTCHA_ABOVE) && (pHtCapability->HtCapInfo.ChannelWidth == BW_40))
{
CentralChannel = pAddHtInfo->ControlChan + 2;
}
DBGPRINT(RT_DEBUG_TRACE, ("PeerBeaconAtJoinAction HT===>Central Channel = %d, Control Channel = %d, .\n", CentralChannel, pAddHtInfo->ControlChan));
}
}
else
#endif /* DOT11_N_SUPPORT */
{
RTMPZeroMemory(&(pApCliEntry->ApCliMlmeAux.HtCapability), SIZE_HT_CAP_IE);
RTMPZeroMemory(&(pApCliEntry->ApCliMlmeAux.AddHtInfo), SIZE_ADD_HT_INFO_IE);
pApCliEntry->ApCliMlmeAux.HtCapabilityLen = 0;
}
ApCliUpdateMlmeRate(pAd, ifIndex);
#ifdef DOT11_N_SUPPORT
/* copy QOS related information */
if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
{
NdisMoveMemory(&(pApCliEntry->ApCliMlmeAux.APEdcaParm), &EdcaParm, sizeof(EDCA_PARM));
NdisMoveMemory(&(pApCliEntry->ApCliMlmeAux.APQbssLoad), &QbssLoad, sizeof(QBSS_LOAD_PARM));
NdisMoveMemory(&(pApCliEntry->ApCliMlmeAux.APQosCapability), &QosCapability, sizeof(QOS_CAPABILITY_PARM));
}
else
#endif /* DOT11_N_SUPPORT */
{
NdisZeroMemory(&(pApCliEntry->ApCliMlmeAux.APEdcaParm), sizeof(EDCA_PARM));
NdisZeroMemory(&(pApCliEntry->ApCliMlmeAux.APQbssLoad), sizeof(QBSS_LOAD_PARM));
NdisZeroMemory(&(pApCliEntry->ApCliMlmeAux.APQosCapability), sizeof(QOS_CAPABILITY_PARM));
}
DBGPRINT(RT_DEBUG_TRACE, ("APCLI SYNC - after JOIN, SupRateLen=%d, ExtRateLen=%d\n",
pApCliEntry->ApCliMlmeAux.SupRateLen, pApCliEntry->ApCliMlmeAux.ExtRateLen));
if (AironetCellPowerLimit != 0xFF)
{
/*We need to change our TxPower for CCX 2.0 AP Control of Client Transmit Power */
ChangeToCellPowerLimit(pAd, AironetCellPowerLimit);
}
else /*Used the default TX Power Percentage. */
pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault;
#ifdef WSC_AP_SUPPORT
#ifdef DOT11_N_SUPPORT
if ((pAd->ApCfg.ApCliTab[ifIndex].WscControl.WscConfMode != WSC_DISABLE) &&
(pAd->ApCfg.ApCliTab[ifIndex].WscControl.bWscTrigger == TRUE))
{
ADD_HTINFO RootApHtInfo, ApHtInfo;
ApHtInfo = pAd->CommonCfg.AddHTInfo.AddHtInfo;
RootApHtInfo = pAddHtInfo->AddHtInfo;
if ((pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth == BW_40) &&
(RootApHtInfo.RecomWidth) &&
(RootApHtInfo.ExtChanOffset != ApHtInfo.ExtChanOffset))
{
/*STRING ChStr[5] = {0}; */
if (RootApHtInfo.ExtChanOffset == EXTCHA_ABOVE)
Set_HtExtcha_Proc(pAd, "1");
else
Set_HtExtcha_Proc(pAd, "0");
goto LabelErr;
}
}
#endif /* DOT11_N_SUPPORT */
#endif /* WSC_AP_SUPPORT */
if(bssidEqualFlag == TRUE)
{
*pCurrState = APCLI_SYNC_IDLE;
ApCliCtrlMsg.Status = MLME_SUCCESS;
#ifdef MAC_REPEATER_SUPPORT
ApCliCtrlMsg.BssIdx = ifIndex;
ApCliCtrlMsg.CliIdx = 0xFF;
#endif /* MAC_REPEATER_SUPPORT */
MlmeEnqueue(pAd, APCLI_CTRL_STATE_MACHINE, APCLI_CTRL_PROBE_RSP,
sizeof(APCLI_CTRL_MSG_STRUCT), &ApCliCtrlMsg, ifIndex);
}
}
/* not to me BEACON, ignored */
}
/* sanity check fail, ignore this frame */
LabelErr:
if (VarIE != NULL)
os_free_mem(NULL, VarIE);
if (pHtCapability != NULL)
os_free_mem(NULL, pHtCapability);
if (pAddHtInfo != NULL)
os_free_mem(NULL, pAddHtInfo);
if (Ssid != NULL)
os_free_mem(NULL, Ssid);
return;
}
/*
==========================================================================
Description:
When waiting joining the (I)BSS, beacon received from external
==========================================================================
*/
static VOID ApCliPeerProbeRspAtJoinAction(
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem)
{
USHORT LenVIE;
UCHAR *VarIE = NULL;
NDIS_802_11_VARIABLE_IEs *pVIE = NULL;
APCLI_CTRL_MSG_STRUCT ApCliCtrlMsg;
PAPCLI_STRUCT pApCliEntry = NULL;
struct wifi_dev *wdev;
#ifdef DOT11_N_SUPPORT
UCHAR CentralChannel;
#endif /* DOT11_N_SUPPORT */
USHORT ifIndex = (USHORT)(Elem->Priv);
ULONG *pCurrState;
BCN_IE_LIST *ie_list = NULL;
if (ifIndex >= MAX_APCLI_NUM)
return;
/* Init Variable IE structure */
os_alloc_mem(NULL, (UCHAR **)&VarIE, MAX_VIE_LEN);
if (VarIE == NULL)
{
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
goto LabelErr;
}
pVIE = (PNDIS_802_11_VARIABLE_IEs) VarIE;
pVIE->Length = 0;
os_alloc_mem(NULL, (UCHAR **)&ie_list, sizeof(BCN_IE_LIST));
if (ie_list == NULL)
{
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate ie_list fail!!!\n", __FUNCTION__));
goto LabelErr;
}
NdisZeroMemory(ie_list, sizeof(BCN_IE_LIST));
pCurrState = &pAd->ApCfg.ApCliTab[ifIndex].SyncCurrState;
if (PeerBeaconAndProbeRspSanity(pAd,
Elem->Msg,
Elem->MsgLen,
Elem->Channel,
ie_list,
&LenVIE,
pVIE))
{
/*
BEACON from desired BSS/IBSS found. We should be able to decide most
BSS parameters here.
Q. But what happen if this JOIN doesn't conclude a successful ASSOCIATEION?
Do we need to receover back all parameters belonging to previous BSS?
A. Should be not. There's no back-door recover to previous AP. It still need
a new JOIN-AUTH-ASSOC sequence.
*/
INT ssidEqualFlag = FALSE;
INT ssidEmptyFlag = FALSE;
INT bssidEqualFlag = FALSE;
INT bssidEmptyFlag = FALSE;
INT matchFlag = FALSE;
ULONG Bssidx;
CHAR RealRssi = -127;
RealRssi = (LONG)(RTMPMaxRssi(pAd, ConvertToRssi(pAd, Elem->Rssi0, RSSI_0),
ConvertToRssi(pAd, Elem->Rssi1, RSSI_1),
ConvertToRssi(pAd, Elem->Rssi2, RSSI_2)));
/* Update ScanTab */
Bssidx = BssTableSearch(&pAd->ScanTab, ie_list->Bssid, ie_list->Channel);
if (Bssidx == BSS_NOT_FOUND)
{
/* discover new AP of this network, create BSS entry */
Bssidx = BssTableSetEntry(pAd, &pAd->ScanTab, ie_list, -127, LenVIE, pVIE);
if (Bssidx == BSS_NOT_FOUND) /* return if BSS table full */
{
DBGPRINT(RT_DEBUG_ERROR, ("ERROR: Driver ScanTable Full In Apcli ProbeRsp Join\n"));
goto LabelErr;
}
NdisMoveMemory(pAd->ScanTab.BssEntry[Bssidx].PTSF, &Elem->Msg[24], 4);
NdisMoveMemory(&pAd->ScanTab.BssEntry[Bssidx].TTSF[0], &Elem->TimeStamp.u.LowPart, 4);
NdisMoveMemory(&pAd->ScanTab.BssEntry[Bssidx].TTSF[4], &Elem->TimeStamp.u.LowPart, 4);
pAd->ScanTab.BssEntry[Bssidx].MinSNR = Elem->Signal % 10;
if (pAd->ScanTab.BssEntry[Bssidx].MinSNR == 0)
pAd->ScanTab.BssEntry[Bssidx].MinSNR = -5;
NdisMoveMemory(pAd->ScanTab.BssEntry[Bssidx].MacAddr, ie_list->Addr2, MAC_ADDR_LEN);
}
#ifdef RT_CFG80211_P2P_CONCURRENT_DEVICE
DBGPRINT(RT_DEBUG_TRACE, ("Info: Update the SSID %s in Kernel Table\n", ie_list->Ssid));
RT_CFG80211_SCANNING_INFORM(pAd, Bssidx, ie_list->Channel, (UCHAR *)Elem->Msg, Elem->MsgLen, RealRssi);
#endif /* RT_CFG80211_P2P_CONCURRENT_DEVICE */
pApCliEntry = &pAd->ApCfg.ApCliTab[ifIndex];
wdev = &pApCliEntry->wdev;
/* Check the Probe-Rsp's Bssid. */
if(!MAC_ADDR_EQUAL(pApCliEntry->CfgApCliBssid, ZERO_MAC_ADDR))
bssidEqualFlag = MAC_ADDR_EQUAL(pApCliEntry->CfgApCliBssid, ie_list->Bssid);
else
bssidEmptyFlag = TRUE;
/* Check the Probe-Rsp's Ssid. */
if(pApCliEntry->CfgSsidLen != 0)
ssidEqualFlag = SSID_EQUAL(pApCliEntry->CfgSsid, pApCliEntry->CfgSsidLen, ie_list->Ssid, ie_list->SsidLen);
else
ssidEmptyFlag = TRUE;
/* bssid and ssid, Both match. */
if (bssidEqualFlag && ssidEqualFlag)
matchFlag = TRUE;
/* ssid match but bssid doesn't be indicate. */
else if(ssidEqualFlag && bssidEmptyFlag)
matchFlag = TRUE;
/* user doesn't indicate any bssid or ssid. AP-Clinet will auto pick a AP to join by most strong siganl strength. */
else if (bssidEmptyFlag && ssidEmptyFlag)
matchFlag = TRUE;
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - bssidEqualFlag=%d, ssidEqualFlag=%d, matchFlag=%d\n",
bssidEqualFlag, ssidEqualFlag, matchFlag));
if (matchFlag)
{
/* Validate RSN IE if necessary, then copy store this information */
if ((LenVIE > 0)
#ifdef RT_CFG80211_P2P_CONCURRENT_DEVICE
/* When using CFG80211 and trigger WPS, do not check security. */
&& ! (pApCliEntry->wpa_supplicant_info.WpaSupplicantUP & WPA_SUPPLICANT_ENABLE_WPS)
#endif /* RT_CFG80211_P2P_CONCURRENT_DEVICE */
)
{
if (ApCliValidateRSNIE(pAd, (PEID_STRUCT)pVIE, LenVIE, ifIndex))
{
pApCliEntry->MlmeAux.VarIELen = LenVIE;
NdisMoveMemory(pApCliEntry->MlmeAux.VarIEs, pVIE, pApCliEntry->MlmeAux.VarIELen);
}
else
{
/* ignore this response */
pApCliEntry->MlmeAux.VarIELen = 0;
DBGPRINT(RT_DEBUG_ERROR, ("ERROR: The RSN IE of this received Probe-resp is dis-match !!!!!!!!!! \n"));
goto LabelErr;
}
}
else
{
if (pApCliEntry->wdev.AuthMode >= Ndis802_11AuthModeWPA
)
{
/* ignore this response */
DBGPRINT(RT_DEBUG_ERROR, ("ERROR: The received Probe-resp has empty RSN IE !!!!!!!!!! \n"));
goto LabelErr;
}
pApCliEntry->MlmeAux.VarIELen = 0;
}
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - receive desired PROBE_RSP at JoinWaitProbeRsp... Channel = %d\n",
ie_list->Channel));
/* if the Bssid doesn't be indicated then you need to decide which AP to connect by most strong Rssi signal strength. */
if (bssidEqualFlag == FALSE)
{
/* caculate real rssi value. */
CHAR Rssi0 = ConvertToRssi(pAd, Elem->Rssi0, RSSI_0);
CHAR Rssi1 = ConvertToRssi(pAd, Elem->Rssi1, RSSI_1);
CHAR Rssi2 = ConvertToRssi(pAd, Elem->Rssi2, RSSI_2);
LONG RealRssi = (LONG)(RTMPMaxRssi(pAd, Rssi0, Rssi1, Rssi2));
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - previous Rssi = %ld current Rssi=%ld\n", pApCliEntry->MlmeAux.Rssi, (LONG)RealRssi));
if (pApCliEntry->MlmeAux.Rssi > (LONG)RealRssi)
goto LabelErr;
else
pApCliEntry->MlmeAux.Rssi = RealRssi;
}
else
{
BOOLEAN Cancelled;
RTMPCancelTimer(&pApCliEntry->MlmeAux.ProbeTimer, &Cancelled);
}
NdisMoveMemory(pApCliEntry->MlmeAux.Ssid, ie_list->Ssid, ie_list->SsidLen);
pApCliEntry->MlmeAux.SsidLen = ie_list->SsidLen;
NdisMoveMemory(pApCliEntry->MlmeAux.Bssid, ie_list->Bssid, MAC_ADDR_LEN);
pApCliEntry->MlmeAux.CapabilityInfo = ie_list->CapabilityInfo & SUPPORTED_CAPABILITY_INFO;
pApCliEntry->MlmeAux.BssType = ie_list->BssType;
pApCliEntry->MlmeAux.BeaconPeriod = ie_list->BeaconPeriod;
pApCliEntry->MlmeAux.Channel = ie_list->Channel;
pApCliEntry->MlmeAux.AtimWin = ie_list->AtimWin;
pApCliEntry->MlmeAux.CfpPeriod = ie_list->CfParm.CfpPeriod;
pApCliEntry->MlmeAux.CfpMaxDuration = ie_list->CfParm.CfpMaxDuration;
pApCliEntry->MlmeAux.APRalinkIe = ie_list->RalinkIe;
/* Copy AP's supported rate to MlmeAux for creating assoication request */
/* Also filter out not supported rate */
pApCliEntry->MlmeAux.SupRateLen = ie_list->SupRateLen;
NdisMoveMemory(pApCliEntry->MlmeAux.SupRate, ie_list->SupRate, ie_list->SupRateLen);
RTMPCheckRates(pAd, pApCliEntry->MlmeAux.SupRate, &pApCliEntry->MlmeAux.SupRateLen);
pApCliEntry->MlmeAux.ExtRateLen = ie_list->ExtRateLen;
NdisMoveMemory(pApCliEntry->MlmeAux.ExtRate, ie_list->ExtRate, ie_list->ExtRateLen);
RTMPCheckRates(pAd, pApCliEntry->MlmeAux.ExtRate, &pApCliEntry->MlmeAux.ExtRateLen);
#ifdef APCLI_CERT_SUPPORT
/* Get the ext capability info element */
if (pAd->bApCliCertTest == TRUE
#ifdef DOT11N_DRAFT3
&& pAd->CommonCfg.bBssCoexEnable == TRUE
#endif /* DOT11N_DRAFT3 */
)
{
NdisMoveMemory(&pApCliEntry->MlmeAux.ExtCapInfo, &ie_list->ExtCapInfo,sizeof(ie_list->ExtCapInfo));
#ifdef DOT11_N_SUPPORT
#ifdef DOT11N_DRAFT3
DBGPRINT(RT_DEBUG_TRACE, ("\x1b[31m ApCliMlmeAux.ExtCapInfo=%d \x1b[m\n", pApCliEntry->MlmeAux.ExtCapInfo.BssCoexistMgmtSupport)); //zero debug 210121122
pAd->CommonCfg.ExtCapIE.BssCoexistMgmtSupport = 1;
#endif /* DOT11N_DRAFT3 */
#endif /* DOT11_N_SUPPORT */
}
#endif /* APCLI_CERT_SUPPORT */
#ifdef DOT11_N_SUPPORT
NdisZeroMemory(pApCliEntry->RxMcsSet,sizeof(pApCliEntry->RxMcsSet));
/* filter out un-supported ht rates */
if ((ie_list->HtCapabilityLen > 0) &&
(pApCliEntry->wdev.DesiredHtPhyInfo.bHtEnable) &&
WMODE_CAP_N(pAd->CommonCfg.PhyMode) &&
/* For Dissallow TKIP rule on STA */
!(pAd->CommonCfg.HT_DisallowTKIP && IS_INVALID_HT_SECURITY(wdev->WepStatus)))
{
RTMPZeroMemory(&pApCliEntry->MlmeAux.HtCapability, SIZE_HT_CAP_IE);
pApCliEntry->MlmeAux.NewExtChannelOffset = ie_list->NewExtChannelOffset;
pApCliEntry->MlmeAux.HtCapabilityLen = ie_list->HtCapabilityLen;
ApCliCheckHt(pAd, ifIndex, &ie_list->HtCapability, &ie_list->AddHtInfo);
if (ie_list->AddHtInfoLen > 0)
{
CentralChannel = ie_list->AddHtInfo.ControlChan;
/* Check again the Bandwidth capability of this AP. */
CentralChannel = get_cent_ch_by_htinfo(pAd, &ie_list->AddHtInfo,
&ie_list->HtCapability);
DBGPRINT(RT_DEBUG_TRACE, ("PeerBeaconAtJoinAction HT===>CentralCh = %d, ControlCh = %d\n",
CentralChannel, ie_list->AddHtInfo.ControlChan));
}
}
else
#endif /* DOT11_N_SUPPORT */
{
RTMPZeroMemory(&pApCliEntry->MlmeAux.HtCapability, SIZE_HT_CAP_IE);
RTMPZeroMemory(&pApCliEntry->MlmeAux.AddHtInfo, SIZE_ADD_HT_INFO_IE);
pApCliEntry->MlmeAux.HtCapabilityLen = 0;
}
ApCliUpdateMlmeRate(pAd, ifIndex);
#ifdef DOT11_N_SUPPORT
/* copy QOS related information */
if (WMODE_CAP_N(pAd->CommonCfg.PhyMode))
{
NdisMoveMemory(&pApCliEntry->MlmeAux.APEdcaParm, &ie_list->EdcaParm, sizeof(EDCA_PARM));
NdisMoveMemory(&pApCliEntry->MlmeAux.APQbssLoad, &ie_list->QbssLoad, sizeof(QBSS_LOAD_PARM));
NdisMoveMemory(&pApCliEntry->MlmeAux.APQosCapability, &ie_list->QosCapability, sizeof(QOS_CAPABILITY_PARM));
}
else
#endif /* DOT11_N_SUPPORT */
{
NdisZeroMemory(&pApCliEntry->MlmeAux.APEdcaParm, sizeof(EDCA_PARM));
NdisZeroMemory(&pApCliEntry->MlmeAux.APQbssLoad, sizeof(QBSS_LOAD_PARM));
NdisZeroMemory(&pApCliEntry->MlmeAux.APQosCapability, sizeof(QOS_CAPABILITY_PARM));
}
DBGPRINT(RT_DEBUG_TRACE, ("APCLI SYNC - after JOIN, SupRateLen=%d, ExtRateLen=%d\n",
pApCliEntry->MlmeAux.SupRateLen, pApCliEntry->MlmeAux.ExtRateLen));
if (ie_list->AironetCellPowerLimit != 0xFF)
{
/* We need to change our TxPower for CCX 2.0 AP Control of Client Transmit Power */
ChangeToCellPowerLimit(pAd, ie_list->AironetCellPowerLimit);
}
else /* Used the default TX Power Percentage. */
pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault;
if(bssidEqualFlag == TRUE)
{
*pCurrState = APCLI_SYNC_IDLE;
ApCliCtrlMsg.Status = MLME_SUCCESS;
MlmeEnqueue(pAd, APCLI_CTRL_STATE_MACHINE, APCLI_CTRL_PROBE_RSP,
sizeof(APCLI_CTRL_MSG_STRUCT), &ApCliCtrlMsg, ifIndex);
}
}
}
LabelErr:
if (VarIE != NULL)
os_free_mem(NULL, VarIE);
if (ie_list != NULL)
os_free_mem(NULL, ie_list);
return;
}
VOID PeerBeaconAtJoinAction(
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem)
{
UCHAR Bssid[MAC_ADDR_LEN], Addr2[MAC_ADDR_LEN];
UCHAR Ssid[MAX_LEN_OF_SSID], SsidLen, BssType, Channel, MessageToMe,
DtimCount, DtimPeriod, BcastFlag, NewChannel;
LARGE_INTEGER TimeStamp;
USHORT BeaconPeriod, AtimWin, CapabilityInfo;
CF_PARM Cf;
BOOLEAN TimerCancelled;
UCHAR Erp;
UCHAR SupRate[MAX_LEN_OF_SUPPORTED_RATES], ExtRate[MAX_LEN_OF_SUPPORTED_RATES];
UCHAR SupRateLen, ExtRateLen;
UCHAR CkipFlag;
USHORT LenVIE;
UCHAR AironetCellPowerLimit;
EDCA_PARM EdcaParm;
QBSS_LOAD_PARM QbssLoad;
QOS_CAPABILITY_PARM QosCapability;
USHORT Status;
UCHAR VarIE[MAX_VIE_LEN];
NDIS_802_11_VARIABLE_IEs *pVIE = NULL;
ULONG RalinkIe;
ULONG Idx;
HT_CAPABILITY_IE HtCapability;
ADD_HT_INFO_IE AddHtInfo;
UCHAR HtCapabilityLen = 0, PreNHtCapabilityLen = 0;
UCHAR AddHtInfoLen;
UCHAR NewExtChannelOffset = 0xff;
#ifdef DOT11_N_SUPPORT
UCHAR CentralChannel;
BOOLEAN bAllowNrate = FALSE;
#endif
pVIE = (PNDIS_802_11_VARIABLE_IEs) VarIE;
pVIE->Length = 0;
RTMPZeroMemory(&HtCapability, sizeof(HtCapability));
RTMPZeroMemory(&AddHtInfo, sizeof(ADD_HT_INFO_IE));
if (PeerBeaconAndProbeRspSanity(pAd,
Elem->Msg,
Elem->MsgLen,
Elem->Channel,
Addr2,
Bssid,
(PCHAR)Ssid,
&SsidLen,
&BssType,
&BeaconPeriod,
&Channel,
&NewChannel,
&TimeStamp,
&Cf,
&AtimWin,
&CapabilityInfo,
&Erp,
&DtimCount,
&DtimPeriod,
&BcastFlag,
&MessageToMe,
SupRate,
&SupRateLen,
ExtRate,
&ExtRateLen,
&CkipFlag,
&AironetCellPowerLimit,
&EdcaParm,
&QbssLoad,
&QosCapability,
&RalinkIe,
&HtCapabilityLen,
&PreNHtCapabilityLen,
&HtCapability,
&AddHtInfoLen,
&AddHtInfo,
&NewExtChannelOffset,
&LenVIE,
pVIE))
{
if ((BssType == BSS_ADHOC) && (pAd->CommonCfg.PhyMode == PHY_11G) && ((SupRateLen+ExtRateLen)< 12))
return;
if (MAC_ADDR_EQUAL(pAd->MlmeAux.Bssid, Bssid))
{
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - receive desired BEACON at JoinWaitBeacon... Channel = %d\n", Channel));
RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer, &TimerCancelled);
pAd->StaCfg.RssiSample.LastRssi0 = ConvertToRssi(pAd, Elem->Rssi0, RSSI_0);
pAd->StaCfg.RssiSample.LastRssi1 = ConvertToRssi(pAd, Elem->Rssi1, RSSI_1);
pAd->StaCfg.RssiSample.LastRssi2 = ConvertToRssi(pAd, Elem->Rssi2, RSSI_2);
pAd->StaCfg.RssiSample.AvgRssi0 = pAd->StaCfg.RssiSample.LastRssi0;
pAd->StaCfg.RssiSample.AvgRssi0X8 = pAd->StaCfg.RssiSample.AvgRssi0 << 3;
pAd->StaCfg.RssiSample.AvgRssi1 = pAd->StaCfg.RssiSample.LastRssi1;
pAd->StaCfg.RssiSample.AvgRssi1X8 = pAd->StaCfg.RssiSample.AvgRssi1 << 3;
pAd->StaCfg.RssiSample.AvgRssi2 = pAd->StaCfg.RssiSample.LastRssi2;
pAd->StaCfg.RssiSample.AvgRssi2X8 = pAd->StaCfg.RssiSample.AvgRssi2 << 3;
if (pAd->MlmeAux.SsidLen == 0)
{
NdisMoveMemory(pAd->MlmeAux.Ssid, Ssid, SsidLen);
pAd->MlmeAux.SsidLen = SsidLen;
}
else
{
Idx = BssSsidTableSearch(&pAd->ScanTab, Bssid, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen, Channel);
if (Idx == BSS_NOT_FOUND)
{
CHAR Rssi = 0;
Rssi = RTMPMaxRssi(pAd, ConvertToRssi(pAd, Elem->Rssi0, RSSI_0), ConvertToRssi(pAd, Elem->Rssi1, RSSI_1), ConvertToRssi(pAd, Elem->Rssi2, RSSI_2));
Idx = BssTableSetEntry(pAd, &pAd->ScanTab, Bssid, (CHAR *) Ssid, SsidLen, BssType, BeaconPeriod,
&Cf, AtimWin, CapabilityInfo, SupRate, SupRateLen, ExtRate, ExtRateLen, &HtCapability,
&AddHtInfo, HtCapabilityLen, AddHtInfoLen, NewExtChannelOffset, Channel, Rssi, TimeStamp, CkipFlag,
&EdcaParm, &QosCapability, &QbssLoad, LenVIE, pVIE);
if (Idx != BSS_NOT_FOUND)
{
NdisMoveMemory(pAd->ScanTab.BssEntry[Idx].PTSF, &Elem->Msg[24], 4);
NdisMoveMemory(&pAd->ScanTab.BssEntry[Idx].TTSF[0], &Elem->TimeStamp.u.LowPart, 4);
NdisMoveMemory(&pAd->ScanTab.BssEntry[Idx].TTSF[4], &Elem->TimeStamp.u.LowPart, 4);
CapabilityInfo = pAd->ScanTab.BssEntry[Idx].CapabilityInfo;
}
}
else
{
CapabilityInfo = pAd->ScanTab.BssEntry[Idx].CapabilityInfo;
}
}
NdisMoveMemory(pAd->MlmeAux.Bssid, Bssid, MAC_ADDR_LEN);
pAd->MlmeAux.CapabilityInfo = CapabilityInfo & SUPPORTED_CAPABILITY_INFO;
pAd->MlmeAux.BssType = BssType;
pAd->MlmeAux.BeaconPeriod = BeaconPeriod;
pAd->MlmeAux.Channel = Channel;
pAd->MlmeAux.AtimWin = AtimWin;
pAd->MlmeAux.CfpPeriod = Cf.CfpPeriod;
pAd->MlmeAux.CfpMaxDuration = Cf.CfpMaxDuration;
pAd->MlmeAux.APRalinkIe = RalinkIe;
pAd->MlmeAux.SupRateLen = SupRateLen;
NdisMoveMemory(pAd->MlmeAux.SupRate, SupRate, SupRateLen);
RTMPCheckRates(pAd, pAd->MlmeAux.SupRate, &pAd->MlmeAux.SupRateLen);
pAd->MlmeAux.ExtRateLen = ExtRateLen;
NdisMoveMemory(pAd->MlmeAux.ExtRate, ExtRate, ExtRateLen);
RTMPCheckRates(pAd, pAd->MlmeAux.ExtRate, &pAd->MlmeAux.ExtRateLen);
NdisZeroMemory(pAd->StaActive.SupportedPhyInfo.MCSSet, 16);
#ifdef DOT11_N_SUPPORT
if (((pAd->StaCfg.WepStatus != Ndis802_11WEPEnabled) && (pAd->StaCfg.WepStatus != Ndis802_11Encryption2Enabled))
|| (pAd->CommonCfg.HT_DisallowTKIP == FALSE))
{
bAllowNrate = TRUE;
}
pAd->MlmeAux.NewExtChannelOffset = NewExtChannelOffset;
pAd->MlmeAux.HtCapabilityLen = HtCapabilityLen;
RTMPZeroMemory(&pAd->MlmeAux.HtCapability, SIZE_HT_CAP_IE);
if (((HtCapabilityLen > 0) || (PreNHtCapabilityLen > 0)) &&
((pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED) && (bAllowNrate)))
{
RTMPMoveMemory(&pAd->MlmeAux.AddHtInfo, &AddHtInfo, SIZE_ADD_HT_INFO_IE);
NdisMoveMemory(pAd->StaActive.SupportedPhyInfo.MCSSet, HtCapability.MCSSet, 16);
pAd->MlmeAux.NewExtChannelOffset = NewExtChannelOffset;
pAd->MlmeAux.HtCapabilityLen = SIZE_HT_CAP_IE;
pAd->StaActive.SupportedPhyInfo.bHtEnable = TRUE;
if (PreNHtCapabilityLen > 0)
pAd->StaActive.SupportedPhyInfo.bPreNHt = TRUE;
RTMPCheckHt(pAd, BSSID_WCID, &HtCapability, &AddHtInfo);
DBGPRINT(RT_DEBUG_TRACE, ("PeerBeaconAtJoinAction! (MpduDensity=%d, MaxRAmpduFactor=%d, BW=%d)\n",
pAd->StaActive.SupportedHtPhy.MpduDensity, pAd->StaActive.SupportedHtPhy.MaxRAmpduFactor, HtCapability.HtCapInfo.ChannelWidth));
if (AddHtInfoLen > 0)
{
CentralChannel = AddHtInfo.ControlChan;
if ((AddHtInfo.ControlChan > 2)&& (AddHtInfo.AddHtInfo.ExtChanOffset == EXTCHA_BELOW) && (HtCapability.HtCapInfo.ChannelWidth == BW_40))
{
CentralChannel = AddHtInfo.ControlChan - 2;
}
else if ((AddHtInfo.AddHtInfo.ExtChanOffset == EXTCHA_ABOVE) && (HtCapability.HtCapInfo.ChannelWidth == BW_40))
{
CentralChannel = AddHtInfo.ControlChan + 2;
}
if (pAd->MlmeAux.CentralChannel != CentralChannel)
DBGPRINT(RT_DEBUG_ERROR, ("PeerBeaconAtJoinAction HT===>Beacon Central Channel = %d, Control Channel = %d. Mlmeaux CentralChannel = %d\n", CentralChannel, AddHtInfo.ControlChan, pAd->MlmeAux.CentralChannel));
DBGPRINT(RT_DEBUG_TRACE, ("PeerBeaconAtJoinAction HT===>Central Channel = %d, Control Channel = %d, .\n", CentralChannel, AddHtInfo.ControlChan));
}
}
else
#endif
{
if ((HtCapabilityLen == 0) && (PreNHtCapabilityLen == 0))
pAd->MlmeAux.CentralChannel = pAd->MlmeAux.Channel;
pAd->StaActive.SupportedPhyInfo.bHtEnable = FALSE;
pAd->MlmeAux.NewExtChannelOffset = 0xff;
RTMPZeroMemory(&pAd->MlmeAux.HtCapability, SIZE_HT_CAP_IE);
pAd->MlmeAux.HtCapabilityLen = 0;
RTMPZeroMemory(&pAd->MlmeAux.AddHtInfo, SIZE_ADD_HT_INFO_IE);
}
RTMPUpdateMlmeRate(pAd);
if ((pAd->CommonCfg.bWmmCapable)
#ifdef DOT11_N_SUPPORT
|| (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
#endif
)
{
NdisMoveMemory(&pAd->MlmeAux.APEdcaParm, &EdcaParm, sizeof(EDCA_PARM));
NdisMoveMemory(&pAd->MlmeAux.APQbssLoad, &QbssLoad, sizeof(QBSS_LOAD_PARM));
NdisMoveMemory(&pAd->MlmeAux.APQosCapability, &QosCapability, sizeof(QOS_CAPABILITY_PARM));
}
else
{
NdisZeroMemory(&pAd->MlmeAux.APEdcaParm, sizeof(EDCA_PARM));
NdisZeroMemory(&pAd->MlmeAux.APQbssLoad, sizeof(QBSS_LOAD_PARM));
NdisZeroMemory(&pAd->MlmeAux.APQosCapability, sizeof(QOS_CAPABILITY_PARM));
}
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - after JOIN, SupRateLen=%d, ExtRateLen=%d\n",
pAd->MlmeAux.SupRateLen, pAd->MlmeAux.ExtRateLen));
if (AironetCellPowerLimit != 0xFF)
{
ChangeToCellPowerLimit(pAd, AironetCellPowerLimit);
}
else
pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault;
pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
Status = MLME_SUCCESS;
MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_JOIN_CONF, 2, &Status);
}
}
}
VOID MlmeStartReqAction(
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem)
{
UCHAR Ssid[MAX_LEN_OF_SSID], SsidLen;
BOOLEAN TimerCancelled;
UCHAR VarIE[MAX_VIE_LEN];
NDIS_802_11_VARIABLE_IEs *pVIE = NULL;
LARGE_INTEGER TimeStamp;
BOOLEAN Privacy;
USHORT Status;
pVIE = (PNDIS_802_11_VARIABLE_IEs) VarIE;
pVIE->Length = 0;
TimeStamp.u.LowPart = 0;
TimeStamp.u.HighPart = 0;
if (MlmeStartReqSanity(pAd, Elem->Msg, Elem->MsgLen, (PCHAR)Ssid, &SsidLen))
{
RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &TimerCancelled);
RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer, &TimerCancelled);
DBGPRINT(RT_DEBUG_TRACE, ("MlmeStartReqAction - Start a new IBSS. All IBSS parameters are decided now.... \n"));
pAd->MlmeAux.BssType = BSS_ADHOC;
NdisMoveMemory(pAd->MlmeAux.Ssid, Ssid, SsidLen);
pAd->MlmeAux.SsidLen = SsidLen;
MacAddrRandomBssid(pAd, pAd->MlmeAux.Bssid);
DBGPRINT(RT_DEBUG_TRACE, ("MlmeStartReqAction - generate a radom number as BSSID \n"));
Privacy = (pAd->StaCfg.WepStatus == Ndis802_11Encryption1Enabled) ||
(pAd->StaCfg.WepStatus == Ndis802_11Encryption2Enabled) ||
(pAd->StaCfg.WepStatus == Ndis802_11Encryption3Enabled);
pAd->MlmeAux.CapabilityInfo = CAP_GENERATE(0,1,Privacy, (pAd->CommonCfg.TxPreamble == Rt802_11PreambleShort), 1, 0);
pAd->MlmeAux.BeaconPeriod = pAd->CommonCfg.BeaconPeriod;
pAd->MlmeAux.AtimWin = pAd->StaCfg.AtimWin;
pAd->MlmeAux.Channel = pAd->CommonCfg.Channel;
pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel;
pAd->MlmeAux.CentralChannel = pAd->CommonCfg.CentralChannel;
pAd->MlmeAux.SupRateLen= pAd->CommonCfg.SupRateLen;
NdisMoveMemory(pAd->MlmeAux.SupRate, pAd->CommonCfg.SupRate, MAX_LEN_OF_SUPPORTED_RATES);
RTMPCheckRates(pAd, pAd->MlmeAux.SupRate, &pAd->MlmeAux.SupRateLen);
pAd->MlmeAux.ExtRateLen = pAd->CommonCfg.ExtRateLen;
NdisMoveMemory(pAd->MlmeAux.ExtRate, pAd->CommonCfg.ExtRate, MAX_LEN_OF_SUPPORTED_RATES);
RTMPCheckRates(pAd, pAd->MlmeAux.ExtRate, &pAd->MlmeAux.ExtRateLen);
#ifdef DOT11_N_SUPPORT
if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED)
{
RTMPUpdateHTIE(&pAd->CommonCfg.DesiredHtPhy, &pAd->StaCfg.DesiredHtPhyInfo.MCSSet[0], &pAd->MlmeAux.HtCapability, &pAd->MlmeAux.AddHtInfo);
pAd->MlmeAux.HtCapabilityLen = sizeof(HT_CAPABILITY_IE);
DBGPRINT(RT_DEBUG_TRACE, ("SYNC -pAd->StaActive.SupportedHtPhy.bHtEnable = TRUE\n"));
}
else
#endif
{
pAd->MlmeAux.HtCapabilityLen = 0;
pAd->StaActive.SupportedPhyInfo.bHtEnable = FALSE;
NdisZeroMemory(&pAd->StaActive.SupportedPhyInfo.MCSSet[0], 16);
}
NdisZeroMemory(&pAd->MlmeAux.APEdcaParm, sizeof(EDCA_PARM));
NdisZeroMemory(&pAd->MlmeAux.APQbssLoad, sizeof(QBSS_LOAD_PARM));
NdisZeroMemory(&pAd->MlmeAux.APQosCapability, sizeof(QOS_CAPABILITY_PARM));
AsicSwitchChannel(pAd, pAd->MlmeAux.Channel, FALSE);
AsicLockChannel(pAd, pAd->MlmeAux.Channel);
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - MlmeStartReqAction(ch= %d,sup rates= %d, ext rates=%d)\n",
pAd->MlmeAux.Channel, pAd->MlmeAux.SupRateLen, pAd->MlmeAux.ExtRateLen));
pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
Status = MLME_SUCCESS;
MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_START_CONF, 2, &Status);
}
else
{
DBGPRINT_ERR(("SYNC - MlmeStartReqAction() sanity check fail.\n"));
pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
Status = MLME_INVALID_FORMAT;
MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_START_CONF, 2, &Status);
}
}
/*
==========================================================================
Description:
When waiting joining the (I)BSS, beacon received from external
==========================================================================
*/
static VOID ApCliPeerProbeRspAtJoinAction(
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem)
{
USHORT LenVIE;
UCHAR *VarIE = NULL;
NDIS_802_11_VARIABLE_IEs *pVIE = NULL;
APCLI_CTRL_MSG_STRUCT ApCliCtrlMsg;
PAPCLI_STRUCT pApCliEntry = NULL;
#ifdef DOT11_N_SUPPORT
UCHAR CentralChannel;
#endif /* DOT11_N_SUPPORT */
USHORT ifIndex = (USHORT)(Elem->Priv);
PULONG pCurrState = NULL;
BCN_IE_LIST *ie_list = NULL;
if (ifIndex >= MAX_APCLI_NUM)
return;
pCurrState = &pAd->ApCfg.ApCliTab[ifIndex].SyncCurrState;
/* Init Variable IE structure */
os_alloc_mem(NULL, (UCHAR **)&VarIE, MAX_VIE_LEN);
if (VarIE == NULL)
{
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
goto LabelErr;
}
pVIE = (PNDIS_802_11_VARIABLE_IEs) VarIE;
pVIE->Length = 0;
os_alloc_mem(NULL, (UCHAR **)&ie_list, sizeof(BCN_IE_LIST));
if (ie_list == NULL)
{
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate ie_list fail!!!\n", __FUNCTION__));
goto LabelErr;
}
NdisZeroMemory(ie_list, sizeof(BCN_IE_LIST));
if (PeerBeaconAndProbeRspSanity(pAd,
Elem->Msg,
Elem->MsgLen,
Elem->Channel,
ie_list,
&LenVIE,
pVIE))
{
/*
BEACON from desired BSS/IBSS found. We should be able to decide most
BSS parameters here.
Q. But what happen if this JOIN doesn't conclude a successful ASSOCIATEION?
Do we need to receover back all parameters belonging to previous BSS?
A. Should be not. There's no back-door recover to previous AP. It still need
a new JOIN-AUTH-ASSOC sequence.
*/
INT ssidEqualFlag = FALSE;
INT ssidEmptyFlag = FALSE;
INT bssidEqualFlag = FALSE;
INT bssidEmptyFlag = FALSE;
INT matchFlag = FALSE;
pApCliEntry = &pAd->ApCfg.ApCliTab[ifIndex];
/* Check the Probe-Rsp's Bssid. */
if(!MAC_ADDR_EQUAL(pApCliEntry->CfgApCliBssid, ZERO_MAC_ADDR))
bssidEqualFlag = MAC_ADDR_EQUAL(pApCliEntry->CfgApCliBssid, ie_list->Bssid);
else
bssidEmptyFlag = TRUE;
/* Check the Probe-Rsp's Ssid. */
if(pApCliEntry->CfgSsidLen != 0)
ssidEqualFlag = SSID_EQUAL(pApCliEntry->CfgSsid, pApCliEntry->CfgSsidLen, ie_list->Ssid, ie_list->SsidLen);
else
ssidEmptyFlag = TRUE;
/* bssid and ssid, Both match. */
if (bssidEqualFlag && ssidEqualFlag)
matchFlag = TRUE;
/* ssid match but bssid doesn't be indicate. */
else if(ssidEqualFlag && bssidEmptyFlag)
matchFlag = TRUE;
/* user doesn't indicate any bssid or ssid. AP-Clinet will auto pick a AP to join by most strong siganl strength. */
else if (bssidEmptyFlag && ssidEmptyFlag)
matchFlag = TRUE;
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - bssidEqualFlag=%d, ssidEqualFlag=%d, matchFlag=%d\n", bssidEqualFlag, ssidEqualFlag, matchFlag));
if (matchFlag)
{
/* Validate RSN IE if necessary, then copy store this information */
if ((LenVIE > 0)
#ifdef WSC_AP_SUPPORT
&& ((pAd->ApCfg.ApCliTab[ifIndex].WscControl.WscConfMode == WSC_DISABLE) ||
(pAd->ApCfg.ApCliTab[ifIndex].WscControl.bWscTrigger == FALSE))
#endif /* WSC_AP_SUPPORT */
)
{
if (ApCliValidateRSNIE(pAd, (PEID_STRUCT)pVIE, LenVIE, ifIndex))
{
pApCliEntry->ApCliMlmeAux.VarIELen = LenVIE;
NdisMoveMemory(pApCliEntry->ApCliMlmeAux.VarIEs, pVIE, pApCliEntry->ApCliMlmeAux.VarIELen);
}
else
{
/* ignore this response */
pApCliEntry->ApCliMlmeAux.VarIELen = 0;
DBGPRINT(RT_DEBUG_ERROR, ("ERROR: The RSN IE of this received Probe-resp is dis-match !!!!!!!!!! \n"));
goto LabelErr;
}
}
else
{
if (pApCliEntry->AuthMode >= Ndis802_11AuthModeWPA
#ifdef WSC_AP_SUPPORT
&& ((pAd->ApCfg.ApCliTab[ifIndex].WscControl.WscConfMode == WSC_DISABLE) ||
(pAd->ApCfg.ApCliTab[ifIndex].WscControl.bWscTrigger == FALSE))
#endif /* WSC_AP_SUPPORT */
)
{
/* ignore this response */
DBGPRINT(RT_DEBUG_ERROR, ("ERROR: The received Probe-resp has empty RSN IE !!!!!!!!!! \n"));
goto LabelErr;
}
pApCliEntry->ApCliMlmeAux.VarIELen = 0;
}
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - receive desired PROBE_RSP at JoinWaitProbeRsp... Channel = %d\n", ie_list->Channel));
/* if the Bssid doesn't be indicated then you need to decide which AP to connect by most strong Rssi signal strength. */
if (bssidEqualFlag == FALSE)
{
/* caculate real rssi value. */
CHAR Rssi0 = ConvertToRssi(pAd, Elem->Rssi0, RSSI_0);
CHAR Rssi1 = ConvertToRssi(pAd, Elem->Rssi1, RSSI_1);
CHAR Rssi2 = ConvertToRssi(pAd, Elem->Rssi2, RSSI_2);
LONG RealRssi = (LONG)(RTMPMaxRssi(pAd, Rssi0, Rssi1, Rssi2));
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - previous Rssi = %ld current Rssi=%ld\n", pApCliEntry->ApCliMlmeAux.Rssi, (LONG)RealRssi));
if (pApCliEntry->ApCliMlmeAux.Rssi > (LONG)RealRssi)
goto LabelErr;
else
pApCliEntry->ApCliMlmeAux.Rssi = RealRssi;
} else
{
BOOLEAN Cancelled;
RTMPCancelTimer(&pApCliEntry->ApCliMlmeAux.ProbeTimer, &Cancelled);
}
NdisMoveMemory(pApCliEntry->ApCliMlmeAux.Ssid, ie_list->Ssid, ie_list->SsidLen);
pApCliEntry->ApCliMlmeAux.SsidLen = ie_list->SsidLen;
NdisMoveMemory(pApCliEntry->ApCliMlmeAux.Bssid, ie_list->Bssid, MAC_ADDR_LEN);
pApCliEntry->ApCliMlmeAux.CapabilityInfo = ie_list->CapabilityInfo & SUPPORTED_CAPABILITY_INFO;
pApCliEntry->ApCliMlmeAux.BssType = ie_list->BssType;
pApCliEntry->ApCliMlmeAux.BeaconPeriod = ie_list->BeaconPeriod;
pApCliEntry->ApCliMlmeAux.Channel = ie_list->Channel;
pApCliEntry->ApCliMlmeAux.AtimWin = ie_list->AtimWin;
pApCliEntry->ApCliMlmeAux.CfpPeriod = ie_list->CfParm.CfpPeriod;
pApCliEntry->ApCliMlmeAux.CfpMaxDuration = ie_list->CfParm.CfpMaxDuration;
pApCliEntry->ApCliMlmeAux.APRalinkIe = ie_list->RalinkIe;
/* Copy AP's supported rate to ApCliMlmeAux for creating assoication request */
/* Also filter out not supported rate */
pApCliEntry->ApCliMlmeAux.SupRateLen = ie_list->SupRateLen;
NdisMoveMemory(pApCliEntry->ApCliMlmeAux.SupRate, ie_list->SupRate, ie_list->SupRateLen);
RTMPCheckRates(pAd, pApCliEntry->ApCliMlmeAux.SupRate, &pApCliEntry->ApCliMlmeAux.SupRateLen);
pApCliEntry->ApCliMlmeAux.ExtRateLen = ie_list->ExtRateLen;
NdisMoveMemory(pApCliEntry->ApCliMlmeAux.ExtRate, ie_list->ExtRate, ie_list->ExtRateLen);
RTMPCheckRates(pAd, pApCliEntry->ApCliMlmeAux.ExtRate, &pApCliEntry->ApCliMlmeAux.ExtRateLen);
#ifdef DOT11_N_SUPPORT
NdisZeroMemory(pApCliEntry->RxMcsSet,sizeof(pApCliEntry->RxMcsSet));
/* filter out un-supported ht rates */
if ((ie_list->HtCapabilityLen > 0) &&
(pApCliEntry->DesiredHtPhyInfo.bHtEnable) &&
WMODE_CAP_N(pAd->CommonCfg.PhyMode))
{
RTMPZeroMemory(&pApCliEntry->ApCliMlmeAux.HtCapability, SIZE_HT_CAP_IE);
pApCliEntry->ApCliMlmeAux.NewExtChannelOffset = ie_list->NewExtChannelOffset;
pApCliEntry->ApCliMlmeAux.HtCapabilityLen = ie_list->HtCapabilityLen;
ApCliCheckHt(pAd, ifIndex, &ie_list->HtCapability, &ie_list->AddHtInfo);
if (ie_list->AddHtInfoLen > 0)
{
CentralChannel = ie_list->AddHtInfo.ControlChan;
/* Check again the Bandwidth capability of this AP. */
CentralChannel = get_cent_ch_by_htinfo(pAd, &ie_list->AddHtInfo,
&ie_list->HtCapability);
DBGPRINT(RT_DEBUG_TRACE, ("PeerBeaconAtJoinAction HT===>Central Channel = %d, Control Channel = %d, .\n", CentralChannel, ie_list->AddHtInfo.ControlChan));
}
}
else
#endif /* DOT11_N_SUPPORT */
{
RTMPZeroMemory(&pApCliEntry->ApCliMlmeAux.HtCapability, SIZE_HT_CAP_IE);
RTMPZeroMemory(&pApCliEntry->ApCliMlmeAux.AddHtInfo, SIZE_ADD_HT_INFO_IE);
pApCliEntry->ApCliMlmeAux.HtCapabilityLen = 0;
}
ApCliUpdateMlmeRate(pAd, ifIndex);
#ifdef DOT11_N_SUPPORT
/* copy QOS related information */
if (WMODE_CAP_N(pAd->CommonCfg.PhyMode))
{
NdisMoveMemory(&pApCliEntry->ApCliMlmeAux.APEdcaParm, &ie_list->EdcaParm, sizeof(EDCA_PARM));
NdisMoveMemory(&pApCliEntry->ApCliMlmeAux.APQbssLoad, &ie_list->QbssLoad, sizeof(QBSS_LOAD_PARM));
NdisMoveMemory(&pApCliEntry->ApCliMlmeAux.APQosCapability, &ie_list->QosCapability, sizeof(QOS_CAPABILITY_PARM));
}
else
#endif /* DOT11_N_SUPPORT */
{
NdisZeroMemory(&pApCliEntry->ApCliMlmeAux.APEdcaParm, sizeof(EDCA_PARM));
NdisZeroMemory(&pApCliEntry->ApCliMlmeAux.APQbssLoad, sizeof(QBSS_LOAD_PARM));
NdisZeroMemory(&pApCliEntry->ApCliMlmeAux.APQosCapability, sizeof(QOS_CAPABILITY_PARM));
}
DBGPRINT(RT_DEBUG_TRACE, ("APCLI SYNC - after JOIN, SupRateLen=%d, ExtRateLen=%d\n",
pApCliEntry->ApCliMlmeAux.SupRateLen, pApCliEntry->ApCliMlmeAux.ExtRateLen));
if (ie_list->AironetCellPowerLimit != 0xFF)
{
/*We need to change our TxPower for CCX 2.0 AP Control of Client Transmit Power */
ChangeToCellPowerLimit(pAd, ie_list->AironetCellPowerLimit);
}
else /*Used the default TX Power Percentage. */
pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault;
#ifdef WSC_AP_SUPPORT
#ifdef DOT11_N_SUPPORT
if ((pAd->ApCfg.ApCliTab[ifIndex].WscControl.WscConfMode != WSC_DISABLE) &&
(pAd->ApCfg.ApCliTab[ifIndex].WscControl.bWscTrigger == TRUE))
{
ADD_HTINFO RootApHtInfo, ApHtInfo;
ApHtInfo = pAd->CommonCfg.AddHTInfo.AddHtInfo;
RootApHtInfo = ie_list->AddHtInfo.AddHtInfo;
if ((pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth == BW_40) &&
(RootApHtInfo.RecomWidth) &&
(RootApHtInfo.ExtChanOffset != ApHtInfo.ExtChanOffset))
{
/*STRING ChStr[5] = {0}; */
if (RootApHtInfo.ExtChanOffset == EXTCHA_ABOVE)
Set_HtExtcha_Proc(pAd, "1");
else
Set_HtExtcha_Proc(pAd, "0");
goto LabelErr;
}
}
#endif /* DOT11_N_SUPPORT */
#endif /* WSC_AP_SUPPORT */
if(bssidEqualFlag == TRUE)
{
*pCurrState = APCLI_SYNC_IDLE;
ApCliCtrlMsg.Status = MLME_SUCCESS;
#ifdef MAC_REPEATER_SUPPORT
ApCliCtrlMsg.BssIdx = ifIndex;
ApCliCtrlMsg.CliIdx = 0xFF;
#endif /* MAC_REPEATER_SUPPORT */
MlmeEnqueue(pAd, APCLI_CTRL_STATE_MACHINE, APCLI_CTRL_PROBE_RSP,
sizeof(APCLI_CTRL_MSG_STRUCT), &ApCliCtrlMsg, ifIndex);
MlmeHandler(pAd);
}
}
/* not to me BEACON, ignored */
}
/* sanity check fail, ignore this frame */
LabelErr:
if (VarIE != NULL)
os_free_mem(NULL, VarIE);
if (ie_list != NULL)
os_free_mem(NULL, ie_list);
return;
}
/*
==========================================================================
Description:
procedures on IEEE 802.11/1999 p.376
Parametrs:
==========================================================================
*/
VOID AssocPostProc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR pAddr2,
IN USHORT CapabilityInfo,
IN USHORT Aid,
IN UCHAR SupRate[],
IN UCHAR SupRateLen,
IN UCHAR ExtRate[],
IN UCHAR ExtRateLen,
IN PEDCA_PARM pEdcaParm)
{
ULONG Idx;
UCHAR VarIesOffset;
pAd->MlmeAux.BssType = BSS_INFRA;
COPY_MAC_ADDR(pAd->MlmeAux.Bssid, pAddr2);
pAd->MlmeAux.Aid = Aid;
pAd->MlmeAux.CapabilityInfo = CapabilityInfo & SUPPORTED_CAPABILITY_INFO;
NdisMoveMemory(&pAd->MlmeAux.APEdcaParm, pEdcaParm, sizeof(EDCA_PARM));
// filter out un-supported rates
pAd->MlmeAux.SupRateLen = SupRateLen;
NdisMoveMemory(pAd->MlmeAux.SupRate, SupRate, SupRateLen);
RTMPCheckRates(pAd, pAd->MlmeAux.SupRate, &pAd->MlmeAux.SupRateLen);
// filter out un-supported rates
pAd->MlmeAux.ExtRateLen = ExtRateLen;
NdisMoveMemory(pAd->MlmeAux.ExtRate, ExtRate, ExtRateLen);
RTMPCheckRates(pAd, pAd->MlmeAux.ExtRate, &pAd->MlmeAux.ExtRateLen);
// Set New WPA information
Idx = BssTableSearch(&pAd->ScanTab, pAddr2, pAd->MlmeAux.Channel);
if (Idx == BSS_NOT_FOUND)
{
DBGPRINT_ERR("ASSOC - Can't find BSS after receiving Assoc response from[%02x:%02x:%02x:%02x:%02x:%02x]\n",
pAddr2[0], pAddr2[1], pAddr2[2], pAddr2[3], pAddr2[4], pAddr2[5]);
}
else
{
// Mod by James to fix OID_802_11_ASSOCIATION_INFORMATION
pAd->PortCfg.AssocInfo.Length = sizeof(NDIS_802_11_ASSOCIATION_INFORMATION); //+ sizeof(NDIS_802_11_FIXED_IEs); // Filled in assoc request
pAd->PortCfg.AssocInfo.AvailableResponseFixedIEs =
NDIS_802_11_AI_RESFI_CAPABILITIES | NDIS_802_11_AI_RESFI_STATUSCODE | NDIS_802_11_AI_RESFI_ASSOCIATIONID;
pAd->PortCfg.AssocInfo.ResponseFixedIEs.Capabilities = CapabilityInfo;
pAd->PortCfg.AssocInfo.ResponseFixedIEs.StatusCode = MLME_SUCCESS; // Should be success, add failed later
pAd->PortCfg.AssocInfo.ResponseFixedIEs.AssociationId = Aid;
// Copy BSS VarIEs to PortCfg associnfo structure.
// First add Supported rates
VarIesOffset = 0;
NdisMoveMemory(pAd->PortCfg.ResVarIEs + VarIesOffset, &SupRateIe, 1);
VarIesOffset += 1;
NdisMoveMemory(pAd->PortCfg.ResVarIEs + VarIesOffset, &SupRateLen, 1);
VarIesOffset += 1;
NdisMoveMemory(pAd->PortCfg.ResVarIEs + VarIesOffset, SupRate, SupRateLen);
VarIesOffset += SupRateLen;
// NdisMoveMemory(pAd->PortCfg.ResVarIEs + VarIesOffset, &ExtRateIe, 1);
// VarIesOffset += 1;
// NdisMoveMemory(pAd->PortCfg.ResVarIEs + VarIesOffset, &ExtRateLen, 1);
// VarIesOffset += 1;
// NdisMoveMemory(pAd->PortCfg.ResVarIEs + VarIesOffset, ExtRate, ExtRateLen);
// VarIesOffset += ExtRateLen;
// Second add RSN
NdisMoveMemory(pAd->PortCfg.ResVarIEs + VarIesOffset, pAd->ScanTab.BssEntry[Idx].VarIEs, pAd->ScanTab.BssEntry[Idx].VarIELen);
VarIesOffset += pAd->ScanTab.BssEntry[Idx].VarIELen;
// Set Variable IEs Length
pAd->PortCfg.ResVarIELen = VarIesOffset;
pAd->PortCfg.AssocInfo.ResponseIELength = VarIesOffset;
}
}
/*
==========================================================================
Description:
When waiting joining the (I)BSS, beacon received from external
==========================================================================
*/
static VOID ApCliPeerProbeRspAtJoinAction(
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem)
{
USHORT LenVIE;
UCHAR *VarIE = NULL;
NDIS_802_11_VARIABLE_IEs *pVIE = NULL;
APCLI_CTRL_MSG_STRUCT ApCliCtrlMsg;
PAPCLI_STRUCT pApCliEntry = NULL;
#ifdef DOT11_N_SUPPORT
UCHAR CentralChannel = 0;
#endif /* DOT11_N_SUPPORT */
USHORT ifIndex = (USHORT)(Elem->Priv);
PULONG pCurrState = &pAd->ApCfg.ApCliTab[ifIndex].SyncCurrState;
BCN_IE_LIST *ie_list = NULL;
/* Init Variable IE structure */
os_alloc_mem(NULL, (UCHAR **)&VarIE, MAX_VIE_LEN);
if (VarIE == NULL)
{
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
goto LabelErr;
}
pVIE = (PNDIS_802_11_VARIABLE_IEs) VarIE;
pVIE->Length = 0;
os_alloc_mem(NULL, (UCHAR **)&ie_list, sizeof(BCN_IE_LIST));
if (ie_list == NULL)
{
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate ie_list fail!!!\n", __FUNCTION__));
goto LabelErr;
}
NdisZeroMemory(ie_list, sizeof(BCN_IE_LIST));
if (PeerBeaconAndProbeRspSanity(pAd,
Elem->Msg,
Elem->MsgLen,
Elem->Channel,
ie_list,
&LenVIE,
pVIE))
{
/*
BEACON from desired BSS/IBSS found. We should be able to decide most
BSS parameters here.
Q. But what happen if this JOIN doesn't conclude a successful ASSOCIATEION?
Do we need to receover back all parameters belonging to previous BSS?
A. Should be not. There's no back-door recover to previous AP. It still need
a new JOIN-AUTH-ASSOC sequence.
*/
INT ssidEqualFlag = FALSE;
INT ssidEmptyFlag = FALSE;
INT bssidEqualFlag = FALSE;
INT bssidEmptyFlag = FALSE;
INT matchFlag = FALSE;
ULONG Bssidx;
#ifdef P2P_SUPPORT
MlmeEnqueue(pAd, P2P_DISC_STATE_MACHINE, P2P_DISC_PEER_PROB_RSP, Elem->MsgLen, Elem->Msg, ie_list->Channel);
#endif /* P2P_SUPPORT */
/*
Update ScanTab
*/
Bssidx = BssTableSearch(&pAd->ScanTab, ie_list->Bssid, ie_list->Channel);
if (Bssidx == BSS_NOT_FOUND)
{
/* discover new AP of this network, create BSS entry */
Bssidx = BssTableSetEntry(pAd, &pAd->ScanTab, ie_list, -127, LenVIE, pVIE);
if (Bssidx == BSS_NOT_FOUND) /* return if BSS table full */
goto LabelErr;
NdisMoveMemory(pAd->ScanTab.BssEntry[Bssidx].PTSF, &Elem->Msg[24], 4);
NdisMoveMemory(&pAd->ScanTab.BssEntry[Bssidx].TTSF[0], &Elem->TimeStamp.u.LowPart, 4);
NdisMoveMemory(&pAd->ScanTab.BssEntry[Bssidx].TTSF[4], &Elem->TimeStamp.u.LowPart, 4);
pAd->ScanTab.BssEntry[Bssidx].MinSNR = Elem->Signal % 10;
if (pAd->ScanTab.BssEntry[Bssidx].MinSNR == 0)
pAd->ScanTab.BssEntry[Bssidx].MinSNR = -5;
NdisMoveMemory(pAd->ScanTab.BssEntry[Bssidx].MacAddr, ie_list->Addr2, MAC_ADDR_LEN);
}
pApCliEntry = &pAd->ApCfg.ApCliTab[ifIndex];
/* Check the Probe-Rsp's Bssid. */
if(!MAC_ADDR_EQUAL(pApCliEntry->CfgApCliBssid, ZERO_MAC_ADDR))
bssidEqualFlag = MAC_ADDR_EQUAL(pApCliEntry->CfgApCliBssid, ie_list->Bssid);
else
bssidEmptyFlag = TRUE;
/* Check the Probe-Rsp's Ssid. */
if(pApCliEntry->CfgSsidLen != 0)
ssidEqualFlag = SSID_EQUAL(pApCliEntry->CfgSsid, pApCliEntry->CfgSsidLen, ie_list->Ssid, ie_list->SsidLen);
else
ssidEmptyFlag = TRUE;
/* bssid and ssid, Both match. */
if (bssidEqualFlag && ssidEqualFlag)
matchFlag = TRUE;
/* ssid match but bssid doesn't be indicate. */
else if(ssidEqualFlag && bssidEmptyFlag)
matchFlag = TRUE;
/* user doesn't indicate any bssid or ssid. AP-Clinet will auto pick a AP to join by most strong siganl strength. */
else if (bssidEmptyFlag && ssidEmptyFlag)
matchFlag = TRUE;
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - bssidEqualFlag=%d, ssidEqualFlag=%d, matchFlag=%d\n", bssidEqualFlag, ssidEqualFlag, matchFlag));
if (matchFlag)
{
/* Validate RSN IE if necessary, then copy store this information */
if ((LenVIE > 0)
#ifdef WSC_AP_SUPPORT
&& ((pAd->ApCfg.ApCliTab[ifIndex].WscControl.WscConfMode == WSC_DISABLE) ||
(pAd->ApCfg.ApCliTab[ifIndex].WscControl.bWscTrigger == FALSE))
#endif /* WSC_AP_SUPPORT */
)
{
if (ApCliValidateRSNIE(pAd, (PEID_STRUCT)pVIE, LenVIE, ifIndex))
{
pAd->ApCliMlmeAux.VarIELen = LenVIE;
NdisMoveMemory(pAd->ApCliMlmeAux.VarIEs, pVIE, pAd->ApCliMlmeAux.VarIELen);
}
else
{
/* ignore this response */
pAd->ApCliMlmeAux.VarIELen = 0;
DBGPRINT(RT_DEBUG_ERROR, ("ERROR: The RSN IE of this received Probe-resp is dis-match !!!!!!!!!! \n"));
goto LabelErr;
}
}
else
{
if (pApCliEntry->AuthMode >= Ndis802_11AuthModeWPA
#ifdef WSC_AP_SUPPORT
&& ((pAd->ApCfg.ApCliTab[ifIndex].WscControl.WscConfMode == WSC_DISABLE) ||
(pAd->ApCfg.ApCliTab[ifIndex].WscControl.bWscTrigger == FALSE))
#endif /* WSC_AP_SUPPORT */
)
{
/* ignore this response */
DBGPRINT(RT_DEBUG_ERROR, ("ERROR: The received Probe-resp has empty RSN IE !!!!!!!!!! \n"));
goto LabelErr;
}
pAd->ApCliMlmeAux.VarIELen = 0;
}
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - receive desired PROBE_RSP at JoinWaitProbeRsp... Channel = %d\n", ie_list->Channel));
/* if the Bssid doesn't be indicated then you need to decide which AP to connect by most strong Rssi signal strength. */
if (bssidEqualFlag == FALSE)
{
/* caculate real rssi value. */
CHAR Rssi0 = ConvertToRssi(pAd, Elem->Rssi0, RSSI_0, Elem->AntSel, BW_20);
CHAR Rssi1 = ConvertToRssi(pAd, Elem->Rssi1, RSSI_1, Elem->AntSel, BW_20);
CHAR Rssi2 = ConvertToRssi(pAd, Elem->Rssi2, RSSI_2, Elem->AntSel, BW_20);
LONG RealRssi = (LONG)(RTMPMaxRssi(pAd, Rssi0, Rssi1, Rssi2));
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - previous Rssi = %ld current Rssi=%ld\n", pAd->ApCliMlmeAux.Rssi, (LONG)RealRssi));
if (pAd->ApCliMlmeAux.Rssi > (LONG)RealRssi)
goto LabelErr;
else
pAd->ApCliMlmeAux.Rssi = RealRssi;
}
else
{
BOOLEAN Cancelled;
RTMPCancelTimer(&pAd->ApCliMlmeAux.ProbeTimer, &Cancelled);
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS))
{
/* Stop Scan and resume */
RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &Cancelled);
pAd->MlmeAux.Channel = 0;
ScanNextChannel(pAd, OPMODE_AP);
}
DBGPRINT(RT_DEBUG_TRACE, ("%s:: Swich Channel = %d. and STOP Scanning!!\n", __FUNCTION__, ie_list->Channel));
}
NdisMoveMemory(pAd->ApCliMlmeAux.Ssid, ie_list->Ssid, ie_list->SsidLen);
pAd->ApCliMlmeAux.SsidLen = ie_list->SsidLen;
NdisMoveMemory(pAd->ApCliMlmeAux.Bssid, ie_list->Bssid, MAC_ADDR_LEN);
pAd->ApCliMlmeAux.CapabilityInfo = ie_list->CapabilityInfo & SUPPORTED_CAPABILITY_INFO;
pAd->ApCliMlmeAux.BssType = ie_list->BssType;
pAd->ApCliMlmeAux.BeaconPeriod = ie_list->BeaconPeriod;
pAd->ApCliMlmeAux.Channel = ie_list->Channel;
pAd->ApCliMlmeAux.AtimWin = ie_list->AtimWin;
pAd->ApCliMlmeAux.CfpPeriod = ie_list->CfParm.CfpPeriod;
pAd->ApCliMlmeAux.CfpMaxDuration = ie_list->CfParm.CfpMaxDuration;
pAd->ApCliMlmeAux.APRalinkIe = ie_list->RalinkIe;
/* Copy AP's supported rate to MlmeAux for creating assoication request */
/* Also filter out not supported rate */
pAd->ApCliMlmeAux.SupRateLen = ie_list->SupRateLen;
NdisMoveMemory(pAd->ApCliMlmeAux.SupRate, ie_list->SupRate, ie_list->SupRateLen);
RTMPCheckRates(pAd, pAd->ApCliMlmeAux.SupRate, &pAd->ApCliMlmeAux.SupRateLen);
pAd->ApCliMlmeAux.ExtRateLen = ie_list->ExtRateLen;
NdisMoveMemory(pAd->ApCliMlmeAux.ExtRate, ie_list->ExtRate, ie_list->ExtRateLen);
RTMPCheckRates(pAd, pAd->ApCliMlmeAux.ExtRate, &pAd->ApCliMlmeAux.ExtRateLen);
#ifdef DOT11_N_SUPPORT
NdisZeroMemory(pAd->ApCfg.ApCliTab[ifIndex].RxMcsSet,sizeof(pAd->ApCfg.ApCliTab[ifIndex].RxMcsSet));
/* filter out un-supported ht rates */
if ((ie_list->HtCapabilityLen > 0) &&
(pApCliEntry->DesiredHtPhyInfo.bHtEnable) &&
WMODE_CAP_N(pAd->CommonCfg.PhyMode))
{
#ifdef P2P_SUPPORT
BOOLEAN P2PGroup_BW;
UCHAR BwFallBack = 0;
#endif /* P2P_SUPPORT */
RTMPZeroMemory(&pAd->ApCliMlmeAux.HtCapability, SIZE_HT_CAP_IE);
pAd->ApCliMlmeAux.NewExtChannelOffset = ie_list->NewExtChannelOffset;
pAd->ApCliMlmeAux.HtCapabilityLen = ie_list->HtCapabilityLen;
ApCliCheckHt(pAd, ifIndex, &ie_list->HtCapability, &ie_list->AddHtInfo);
RTMPMoveMemory(&pAd->ApCliMlmeAux.AddHtInfo, &ie_list->AddHtInfo, SIZE_ADD_HT_INFO_IE);
if (ie_list->AddHtInfoLen > 0)
{
CentralChannel = ie_list->AddHtInfo.ControlChan;
/* Check again the Bandwidth capability of this AP. */
CentralChannel = get_cent_ch_by_htinfo(pAd, &ie_list->AddHtInfo, &ie_list->HtCapability);
DBGPRINT(RT_DEBUG_TRACE, ("PeerBeaconAtJoinAction HT===>Central Channel = %d, Control Channel = %d, .\n", CentralChannel, ie_list->AddHtInfo.ControlChan));
}
#ifdef P2P_SUPPORT
if (INFRA_ON(pAd) && (pAd->CommonCfg.CentralChannel != CentralChannel) && (pAd->StaActive.SupportedHtPhy.ChannelWidth == BW_40))
{
DBGPRINT(RT_DEBUG_OFF, ("PeerBeaconAtJoinAction HT===> Channel offset = %d not match INFRA Channel offset %d .\n",
pAd->MlmeAux.CentralChannel, CentralChannel));
//goto LabelErr;
}
/*P2PChannelInit(pAd, MAIN_MBSSID); */
pAd->ApCliMlmeAux.CentralChannel = CentralChannel;
//P2PInitChannelRelatedValue(pAd);
if (pAd->ApCliMlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40)
P2PGroup_BW = TRUE;
else
P2PGroup_BW = FALSE;
AdjustChannelRelatedValue(pAd,
&BwFallBack,
ifIndex,
P2PGroup_BW,
pAd->ApCliMlmeAux.Channel,
pAd->ApCliMlmeAux.CentralChannel);
if (BwFallBack == 1)
{
DBGPRINT(RT_DEBUG_TRACE, ("Infra STA connection to 40MHz AP, but Infra extra and P2P Group extra is different!!!\n"));
pAd->ApCliMlmeAux.HtCapability.HtCapInfo.ChannelWidth = BW_20;
pAd->ApCliMlmeAux.CentralChannel = pAd->ApCliMlmeAux.Channel;
pAd->ApCliMlmeAux.bBwFallBack = TRUE;
}
else
{
pAd->ApCliMlmeAux.bBwFallBack = FALSE;
}
pAd->ApCliMlmeAux.ConCurrentCentralChannel = pAd->CommonCfg.CentralChannel;
#endif /* P2P_SUPPORT */
}
else
#endif /* DOT11_N_SUPPORT */
{
RTMPZeroMemory(&pAd->ApCliMlmeAux.HtCapability, SIZE_HT_CAP_IE);
RTMPZeroMemory(&pAd->ApCliMlmeAux.AddHtInfo, SIZE_ADD_HT_INFO_IE);
pAd->ApCliMlmeAux.HtCapabilityLen = 0;
}
#ifdef P2P_SUPPORT
P2PUpdateMlmeRate(pAd);
#else
RTMPUpdateMlmeRate(pAd);
#endif /* P2P_SUPPORT */
#ifdef DOT11_N_SUPPORT
/* copy QOS related information */
if (WMODE_CAP_N(pAd->CommonCfg.PhyMode))
{
NdisMoveMemory(&pAd->ApCliMlmeAux.APEdcaParm, &ie_list->EdcaParm, sizeof(EDCA_PARM));
NdisMoveMemory(&pAd->ApCliMlmeAux.APQbssLoad, &ie_list->QbssLoad, sizeof(QBSS_LOAD_PARM));
NdisMoveMemory(&pAd->ApCliMlmeAux.APQosCapability, &ie_list->QosCapability, sizeof(QOS_CAPABILITY_PARM));
}
else
#endif /* DOT11_N_SUPPORT */
{
NdisZeroMemory(&pAd->ApCliMlmeAux.APEdcaParm, sizeof(EDCA_PARM));
NdisZeroMemory(&pAd->ApCliMlmeAux.APQbssLoad, sizeof(QBSS_LOAD_PARM));
NdisZeroMemory(&pAd->ApCliMlmeAux.APQosCapability, sizeof(QOS_CAPABILITY_PARM));
}
DBGPRINT(RT_DEBUG_TRACE, ("APCLI SYNC - after JOIN, SupRateLen=%d, ExtRateLen=%d\n",
pAd->ApCliMlmeAux.SupRateLen, pAd->ApCliMlmeAux.ExtRateLen));
if (ie_list->AironetCellPowerLimit != 0xFF)
{
/*We need to change our TxPower for CCX 2.0 AP Control of Client Transmit Power */
ChangeToCellPowerLimit(pAd, ie_list->AironetCellPowerLimit);
}
else /*Used the default TX Power Percentage. */
pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault;
if(bssidEqualFlag == TRUE)
{
*pCurrState = APCLI_SYNC_IDLE;
ApCliCtrlMsg.Status = MLME_SUCCESS;
MlmeEnqueue(pAd, APCLI_CTRL_STATE_MACHINE, APCLI_CTRL_PROBE_RSP,
sizeof(APCLI_CTRL_MSG_STRUCT), &ApCliCtrlMsg, ifIndex);
}
}
/* not to me BEACON, ignored */
}
/* sanity check fail, ignore this frame */
LabelErr:
if (VarIE != NULL)
os_free_mem(NULL, VarIE);
if (ie_list != NULL)
os_free_mem(NULL, ie_list);
return;
}
/*
==========================================================================
Description:
When waiting joining the (I)BSS, beacon received from external
==========================================================================
*/
static VOID ApCliPeerProbeRspAtJoinAction(
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem)
{
USHORT LenVIE;
UCHAR *VarIE = NULL;
NDIS_802_11_VARIABLE_IEs *pVIE = NULL;
APCLI_CTRL_MSG_STRUCT ApCliCtrlMsg;
PAPCLI_STRUCT pApCliEntry = NULL;
struct wifi_dev *wdev;
#ifdef DOT11_N_SUPPORT
UCHAR CentralChannel;
#endif /* DOT11_N_SUPPORT */
USHORT ifIndex = (USHORT)(Elem->Priv);
ULONG *pCurrState;
BCN_IE_LIST *ie_list = NULL;
UCHAR PhyMode = pAd->CommonCfg.PhyMode;
PFRAME_802_11 pFrame = NULL;
if (ifIndex >= MAX_APCLI_NUM)
return;
/* Init Variable IE structure */
os_alloc_mem(NULL, (UCHAR **)&VarIE, MAX_VIE_LEN);
if (VarIE == NULL)
{
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate memory fail!!!\n", __FUNCTION__));
goto LabelErr;
}
pVIE = (PNDIS_802_11_VARIABLE_IEs) VarIE;
pVIE->Length = 0;
os_alloc_mem(NULL, (UCHAR **)&ie_list, sizeof(BCN_IE_LIST));
if (ie_list == NULL)
{
DBGPRINT(RT_DEBUG_ERROR, ("%s: Allocate ie_list fail!!!\n", __FUNCTION__));
goto LabelErr;
}
NdisZeroMemory(ie_list, sizeof(BCN_IE_LIST));
pFrame = (PFRAME_802_11)Elem->Msg;
pCurrState = &pAd->ApCfg.ApCliTab[ifIndex].SyncCurrState;
if (PeerBeaconAndProbeRspSanity(pAd,
Elem->Msg,
Elem->MsgLen,
Elem->Channel,
ie_list,
&LenVIE,
pVIE))
{
/*
BEACON from desired BSS/IBSS found. We should be able to decide most
BSS parameters here.
Q. But what happen if this JOIN doesn't conclude a successful ASSOCIATEION?
Do we need to receover back all parameters belonging to previous BSS?
A. Should be not. There's no back-door recover to previous AP. It still need
a new JOIN-AUTH-ASSOC sequence.
*/
INT ssidEqualFlag = FALSE;
INT ssidEmptyFlag = FALSE;
INT bssidEqualFlag = FALSE;
INT bssidEmptyFlag = FALSE;
INT matchFlag = FALSE;
ULONG Bssidx;
LONG RealRssi = -127;
#ifdef RT_CFG80211_P2P_CONCURRENT_DEVICE
RealRssi = (LONG)(RTMPMaxRssi(pAd, ConvertToRssi(pAd, Elem->Rssi0, RSSI_0),
ConvertToRssi(pAd, Elem->Rssi1, RSSI_1),
ConvertToRssi(pAd, Elem->Rssi2, RSSI_2)));
#endif /* RT_CFG80211_P2P_CONCURRENT_DEVICE */
/* Update ScanTab */
Bssidx = BssTableSearch(&pAd->ScanTab, ie_list->Bssid, ie_list->Channel);
if (Bssidx == BSS_NOT_FOUND)
{
/* discover new AP of this network, create BSS entry */
#ifdef CUSTOMER_DCC_FEATURE
Bssidx = BssTableSetEntry(pAd, &pAd->ScanTab, ie_list, -127, LenVIE, pVIE, Elem->Snr0, Elem->Snr1);
#else
Bssidx = BssTableSetEntry(pAd, &pAd->ScanTab, ie_list, -127, LenVIE, pVIE);
#endif
if (Bssidx == BSS_NOT_FOUND) /* return if BSS table full */
{
DBGPRINT(RT_DEBUG_ERROR, ("ERROR: Driver ScanTable Full In Apcli ProbeRsp Join\n"));
goto LabelErr;
}
NdisMoveMemory(pAd->ScanTab.BssEntry[Bssidx].PTSF, &Elem->Msg[24], 4);
NdisMoveMemory(&pAd->ScanTab.BssEntry[Bssidx].TTSF[0], &Elem->TimeStamp.u.LowPart, 4);
NdisMoveMemory(&pAd->ScanTab.BssEntry[Bssidx].TTSF[4], &Elem->TimeStamp.u.LowPart, 4);
pAd->ScanTab.BssEntry[Bssidx].MinSNR = Elem->Signal % 10;
if (pAd->ScanTab.BssEntry[Bssidx].MinSNR == 0)
pAd->ScanTab.BssEntry[Bssidx].MinSNR = -5;
NdisMoveMemory(pAd->ScanTab.BssEntry[Bssidx].MacAddr, ie_list->Addr2, MAC_ADDR_LEN);
}
#ifdef RT_CFG80211_P2P_CONCURRENT_DEVICE
DBGPRINT(RT_DEBUG_TRACE, ("Info: Update the SSID %s in Kernel Table\n", ie_list->Ssid));
RT_CFG80211_SCANNING_INFORM(pAd, Bssidx, ie_list->Channel, (UCHAR *)Elem->Msg, Elem->MsgLen, RealRssi);
#endif /* RT_CFG80211_P2P_CONCURRENT_DEVICE */
pApCliEntry = &pAd->ApCfg.ApCliTab[ifIndex];
wdev = &pApCliEntry->wdev;
/* Check the Probe-Rsp's Ssid. */
#ifdef WSC_AP_SUPPORT
if ((pApCliEntry->WscControl.WscConfMode != WSC_DISABLE) &&
(pApCliEntry->WscControl.bWscTrigger == TRUE))
{
#ifdef SMART_MESH
if((pApCliEntry->WscControl.WscMode == 2) &&
(pApCliEntry->WscControl.bWscPBCAddrMode == TRUE))
bssidEqualFlag = MAC_ADDR_EQUAL(pApCliEntry->WscControl.WscPBCAddr, ie_list->Bssid);
else
#endif /* SMART_MESH */
{
if(!MAC_ADDR_EQUAL(pApCliEntry->CfgApCliBssid, ZERO_MAC_ADDR))
bssidEqualFlag = MAC_ADDR_EQUAL(pApCliEntry->CfgApCliBssid, ie_list->Bssid);
else
bssidEmptyFlag = TRUE;
}
if(pApCliEntry->WscControl.WscSsid.SsidLength != 0)
ssidEqualFlag = SSID_EQUAL(pApCliEntry->WscControl.WscSsid.Ssid,
pApCliEntry->WscControl.WscSsid.SsidLength,ie_list->Ssid, ie_list->SsidLen);
else
ssidEmptyFlag = TRUE;
}
else
#endif /* WSC_AP_SUPPORT */
{
/* Check the Probe-Rsp's Bssid. */
if(!MAC_ADDR_EQUAL(pApCliEntry->CfgApCliBssid, ZERO_MAC_ADDR))
bssidEqualFlag = MAC_ADDR_EQUAL(pApCliEntry->CfgApCliBssid, ie_list->Bssid);
else
bssidEmptyFlag = TRUE;
if(pApCliEntry->CfgSsidLen != 0)
ssidEqualFlag = SSID_EQUAL(pApCliEntry->CfgSsid, pApCliEntry->CfgSsidLen, ie_list->Ssid, ie_list->SsidLen);
else
ssidEmptyFlag = TRUE;
}
/* bssid and ssid, Both match. */
if (bssidEqualFlag && ssidEqualFlag)
matchFlag = TRUE;
/* ssid match but bssid doesn't be indicate. */
else if(ssidEqualFlag && bssidEmptyFlag)
matchFlag = TRUE;
/* user doesn't indicate any bssid or ssid. AP-Clinet will auto pick a AP to join by most strong siganl strength. */
else if (bssidEmptyFlag && ssidEmptyFlag)
{
matchFlag = TRUE;
#ifdef SMART_MESH
matchFlag = FALSE;
#endif /* SMART_MESH */
}
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - bssidEqualFlag=%d, ssidEqualFlag=%d, matchFlag=%d\n",
bssidEqualFlag, ssidEqualFlag, matchFlag));
if (matchFlag)
{
/* Validate RSN IE if necessary, then copy store this information */
if ((LenVIE > 0)
#ifdef WSC_AP_SUPPORT
&& ((pApCliEntry->WscControl.WscConfMode == WSC_DISABLE) ||
(pApCliEntry->WscControl.bWscTrigger == FALSE))
#endif /* WSC_AP_SUPPORT */
#ifdef RT_CFG80211_P2P_CONCURRENT_DEVICE
/* When using CFG80211 and trigger WPS, do not check security. */
&& ! (pApCliEntry->wpa_supplicant_info.WpaSupplicantUP & WPA_SUPPLICANT_ENABLE_WPS)
#endif /* RT_CFG80211_P2P_CONCURRENT_DEVICE */
)
{
if (ApCliValidateRSNIE(pAd, (PEID_STRUCT)pVIE, LenVIE, ifIndex))
{
pApCliEntry->MlmeAux.VarIELen = LenVIE;
NdisMoveMemory(pApCliEntry->MlmeAux.VarIEs, pVIE, pApCliEntry->MlmeAux.VarIELen);
}
else
{
/* ignore this response */
pApCliEntry->MlmeAux.VarIELen = 0;
DBGPRINT(RT_DEBUG_ERROR, ("ERROR: The RSN IE of this received Probe-resp is dis-match !!!!!!!!!! \n"));
goto LabelErr;
}
}
else
{
if (pApCliEntry->wdev.AuthMode >= Ndis802_11AuthModeWPA
#ifdef WSC_AP_SUPPORT
&& ((pApCliEntry->WscControl.WscConfMode == WSC_DISABLE) ||
(pApCliEntry->WscControl.bWscTrigger == FALSE))
#endif /* WSC_AP_SUPPORT */
)
{
/* ignore this response */
DBGPRINT(RT_DEBUG_ERROR, ("ERROR: The received Probe-resp has empty RSN IE !!!!!!!!!! \n"));
goto LabelErr;
}
pApCliEntry->MlmeAux.VarIELen = 0;
}
#ifdef SMART_MESH
PSMART_MESH_CFG pSmartMeshCfg = NULL;
pSmartMeshCfg = &pApCliEntry->SmartMeshCfg;
if(((pSmartMeshCfg->HiFiFlagMask != 0) && (pSmartMeshCfg->HiFiFlagValue != 0)) &&
((ie_list->VIEFlag & pSmartMeshCfg->HiFiFlagMask) == pSmartMeshCfg->HiFiFlagValue))
{
pAd->ScanTab.BssEntry[Bssidx].bHyperFiPeer = TRUE;
pApCliEntry->MlmeAux.bHyperFiPeer = TRUE;
}
else
{
pAd->ScanTab.BssEntry[Bssidx].bHyperFiPeer = FALSE;
pApCliEntry->MlmeAux.bHyperFiPeer = FALSE;
}
if((pSmartMeshCfg->bHiFiPeerFilter == TRUE) &&
(pAd->ScanTab.BssEntry[Bssidx].bHyperFiPeer == FALSE))
{
DBGPRINT(RT_DEBUG_OFF, ("Reject this PROBE_RSP due to not desired Hyper-Fi peer(%02X:%02X:%02X:%02X:%02X:%02X).\n",PRINT_MAC(pAd->ScanTab.BssEntry[Bssidx].Bssid)));
goto LabelErr;
}
if(pAd->ScanTab.BssEntry[Bssidx].bSupportSmartMesh != ie_list->bSupportSmartMesh)
pAd->ScanTab.BssEntry[Bssidx].bSupportSmartMesh = ie_list->bSupportSmartMesh;
if(pAd->ScanTab.BssEntry[Bssidx].bSupportSmartMesh)
{
pApCliEntry->MlmeAux.bSupportSmartMesh = TRUE;
DBGPRINT(RT_DEBUG_OFF, ("AP supports SMART MESH\n"));
}
else
pApCliEntry->MlmeAux.bSupportSmartMesh = FALSE;
if(pAd->ScanTab.BssEntry[Bssidx].bHyperFiPeer)
DBGPRINT(RT_DEBUG_OFF, ("AP is Hyper-Fi device\n"));
#endif /* SMART_MESH */
#ifdef MWDS
if(pAd->ScanTab.BssEntry[Bssidx].bSupportMWDS != ie_list->bSupportMWDS)
pAd->ScanTab.BssEntry[Bssidx].bSupportMWDS = ie_list->bSupportMWDS;
if(pAd->ScanTab.BssEntry[Bssidx].bSupportMWDS)
{
pApCliEntry->MlmeAux.bSupportMWDS = TRUE;
DBGPRINT(RT_DEBUG_OFF, ("AP supports MWDS\n"));
}
else
pApCliEntry->MlmeAux.bSupportMWDS = FALSE;
#endif /* MWDS */
#ifdef WSC_AP_SUPPORT
#ifdef SMART_MESH_HIDDEN_WPS
if(pAd->ScanTab.BssEntry[Bssidx].bSupportHiddenWPS != ie_list->bSupportHiddenWPS)
pAd->ScanTab.BssEntry[Bssidx].bSupportHiddenWPS = ie_list->bSupportHiddenWPS;
if(pAd->ScanTab.BssEntry[Bssidx].bSupportHiddenWPS)
DBGPRINT(RT_DEBUG_OFF, ("AP supports HiddenWPS\n"));
if(pAd->ScanTab.BssEntry[Bssidx].bRunningHiddenWPS != ie_list->bRunningHiddenWPS)
pAd->ScanTab.BssEntry[Bssidx].bRunningHiddenWPS = ie_list->bRunningHiddenWPS;
if(pAd->ScanTab.BssEntry[Bssidx].bRunningHiddenWPS)
DBGPRINT(RT_DEBUG_OFF, ("AP is running HiddenWPS\n"));
#endif /* SMART_MESH_HIDDEN_WPS */
#endif /* WSC_AP_SUPPORT */
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - receive desired PROBE_RSP at JoinWaitProbeRsp... Channel = %d\n",
ie_list->Channel));
/* if the Bssid doesn't be indicated then you need to decide which AP to connect by most strong Rssi signal strength. */
if (bssidEqualFlag == FALSE)
{
/* caculate real rssi value. */
CHAR Rssi0 = ConvertToRssi(pAd, Elem->Rssi0, RSSI_0);
CHAR Rssi1 = ConvertToRssi(pAd, Elem->Rssi1, RSSI_1);
CHAR Rssi2 = ConvertToRssi(pAd, Elem->Rssi2, RSSI_2);
LONG RealMaxRssi = (LONG)(RTMPMaxRssi(pAd, Rssi0, Rssi1, Rssi2));
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - previous Rssi = %ld current Rssi=%ld\n", pApCliEntry->MlmeAux.Rssi, (LONG)RealMaxRssi));
if (pApCliEntry->MlmeAux.Rssi > (LONG)RealMaxRssi)
goto LabelErr;
else
pApCliEntry->MlmeAux.Rssi = RealMaxRssi;
}
else
{
BOOLEAN Cancelled;
RTMPCancelTimer(&pApCliEntry->MlmeAux.ProbeTimer, &Cancelled);
}
NdisMoveMemory(pApCliEntry->MlmeAux.Ssid, ie_list->Ssid, ie_list->SsidLen);
pApCliEntry->MlmeAux.SsidLen = ie_list->SsidLen;
NdisMoveMemory(pApCliEntry->MlmeAux.Bssid, ie_list->Bssid, MAC_ADDR_LEN);
pApCliEntry->MlmeAux.CapabilityInfo = ie_list->CapabilityInfo & SUPPORTED_CAPABILITY_INFO;
pApCliEntry->MlmeAux.BssType = ie_list->BssType;
pApCliEntry->MlmeAux.BeaconPeriod = ie_list->BeaconPeriod;
pApCliEntry->MlmeAux.Channel = ie_list->Channel;
pApCliEntry->MlmeAux.CentralChannel = ie_list->Channel; /* by default */
pApCliEntry->MlmeAux.AtimWin = ie_list->AtimWin;
pApCliEntry->MlmeAux.CfpPeriod = ie_list->CfParm.CfpPeriod;
pApCliEntry->MlmeAux.CfpMaxDuration = ie_list->CfParm.CfpMaxDuration;
pApCliEntry->MlmeAux.APRalinkIe = ie_list->RalinkIe;
/* Copy AP's supported rate to MlmeAux for creating assoication request */
/* Also filter out not supported rate */
pApCliEntry->MlmeAux.SupRateLen = ie_list->SupRateLen;
NdisMoveMemory(pApCliEntry->MlmeAux.SupRate, ie_list->SupRate, ie_list->SupRateLen);
RTMPCheckRates(pAd, pApCliEntry->MlmeAux.SupRate, &pApCliEntry->MlmeAux.SupRateLen);
pApCliEntry->MlmeAux.ExtRateLen = ie_list->ExtRateLen;
NdisMoveMemory(pApCliEntry->MlmeAux.ExtRate, ie_list->ExtRate, ie_list->ExtRateLen);
RTMPCheckRates(pAd, pApCliEntry->MlmeAux.ExtRate, &pApCliEntry->MlmeAux.ExtRateLen);
#ifdef APCLI_CERT_SUPPORT
/* Get the ext capability info element */
if (pAd->bApCliCertTest == TRUE
#ifdef DOT11N_DRAFT3
&& pAd->CommonCfg.bBssCoexEnable == TRUE
#endif /* DOT11N_DRAFT3 */
)
{
NdisMoveMemory(&pApCliEntry->MlmeAux.ExtCapInfo, &ie_list->ExtCapInfo,sizeof(ie_list->ExtCapInfo));
#ifdef DOT11_N_SUPPORT
#ifdef DOT11N_DRAFT3
DBGPRINT(RT_DEBUG_TRACE, ("\x1b[31m ApCliMlmeAux.ExtCapInfo=%d \x1b[m\n", pApCliEntry->MlmeAux.ExtCapInfo.BssCoexistMgmtSupport)); //zero debug 210121122
pAd->CommonCfg.ExtCapIE.BssCoexistMgmtSupport = 1;
#endif /* DOT11N_DRAFT3 */
#endif /* DOT11_N_SUPPORT */
}
#endif /* APCLI_CERT_SUPPORT */
#ifdef DOT11_N_SUPPORT
NdisZeroMemory(pApCliEntry->RxMcsSet,sizeof(pApCliEntry->RxMcsSet));
#ifdef APCLI_AUTO_BW_SUPPORT
PhyMode = pApCliEntry->wdev.PhyMode;
DBGPRINT(RT_DEBUG_OFF, ("%s: check HT Rule --> %d %d %d %d\n", __FUNCTION__, (ie_list->HtCapabilityLen > 0),
(pApCliEntry->wdev.DesiredHtPhyInfo.bHtEnable), WMODE_CAP_N(pApCliEntry->wdev.PhyMode),
!(pAd->CommonCfg.HT_DisallowTKIP && IS_INVALID_HT_SECURITY(wdev->WepStatus))));
#endif /* APCLI_AUTO_BW_SUPPORT */
/* filter out un-supported ht rates */
if ((ie_list->HtCapabilityLen > 0) &&
(pApCliEntry->wdev.DesiredHtPhyInfo.bHtEnable) &&
WMODE_CAP_N(PhyMode) &&
/* For Dissallow TKIP rule on STA */
!(pAd->CommonCfg.HT_DisallowTKIP && IS_INVALID_HT_SECURITY(wdev->WepStatus)))
{
RTMPZeroMemory(&pApCliEntry->MlmeAux.HtCapability, SIZE_HT_CAP_IE);
pApCliEntry->MlmeAux.NewExtChannelOffset = ie_list->NewExtChannelOffset;
pApCliEntry->MlmeAux.HtCapabilityLen = ie_list->HtCapabilityLen;
ApCliCheckHt(pAd, ifIndex, &ie_list->HtCapability, &ie_list->AddHtInfo);
if (ie_list->AddHtInfoLen > 0)
{
CentralChannel = ie_list->AddHtInfo.ControlChan;
/* Check again the Bandwidth capability of this AP. */
CentralChannel = get_cent_ch_by_htinfo(pAd, &ie_list->AddHtInfo,
&ie_list->HtCapability);
pApCliEntry->MlmeAux.CentralChannel = CentralChannel;
DBGPRINT(RT_DEBUG_TRACE, ("PeerBeaconAtJoinAction HT===>CentralCh = %d, ControlCh = %d\n",
CentralChannel, ie_list->AddHtInfo.ControlChan));
}
}
else
#endif /* DOT11_N_SUPPORT */
{
RTMPZeroMemory(&pApCliEntry->MlmeAux.HtCapability, SIZE_HT_CAP_IE);
RTMPZeroMemory(&pApCliEntry->MlmeAux.AddHtInfo, SIZE_ADD_HT_INFO_IE);
pApCliEntry->MlmeAux.HtCapabilityLen = 0;
}
ApCliUpdateMlmeRate(pAd, ifIndex);
#ifdef DOT11_N_SUPPORT
/* copy QOS related information */
if (WMODE_CAP_N(PhyMode))
{
NdisMoveMemory(&pApCliEntry->MlmeAux.APEdcaParm, &ie_list->EdcaParm, sizeof(EDCA_PARM));
NdisMoveMemory(&pApCliEntry->MlmeAux.APQbssLoad, &ie_list->QbssLoad, sizeof(QBSS_LOAD_PARM));
NdisMoveMemory(&pApCliEntry->MlmeAux.APQosCapability, &ie_list->QosCapability, sizeof(QOS_CAPABILITY_PARM));
}
else
#endif /* DOT11_N_SUPPORT */
{
NdisZeroMemory(&pApCliEntry->MlmeAux.APEdcaParm, sizeof(EDCA_PARM));
NdisZeroMemory(&pApCliEntry->MlmeAux.APQbssLoad, sizeof(QBSS_LOAD_PARM));
NdisZeroMemory(&pApCliEntry->MlmeAux.APQosCapability, sizeof(QOS_CAPABILITY_PARM));
}
DBGPRINT(RT_DEBUG_TRACE, ("APCLI SYNC - after JOIN, SupRateLen=%d, ExtRateLen=%d\n",
pApCliEntry->MlmeAux.SupRateLen, pApCliEntry->MlmeAux.ExtRateLen));
if (ie_list->AironetCellPowerLimit != 0xFF)
{
/* We need to change our TxPower for CCX 2.0 AP Control of Client Transmit Power */
ChangeToCellPowerLimit(pAd, ie_list->AironetCellPowerLimit);
}
else /* Used the default TX Power Percentage. */
pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault;
#ifdef APCLI_AUTO_BW_SUPPORT
if ((ie_list->HtCapabilityLen > 0) &&
(ie_list->HtCapability.HtCapInfo.ChannelWidth == BW_40))
{
ApCliAutoBwAction(pAd, ifIndex);
}
#endif /* APCLI_AUTO_BW_SUPPORT */
if(bssidEqualFlag == TRUE)
{
*pCurrState = APCLI_SYNC_IDLE;
ApCliCtrlMsg.Status = MLME_SUCCESS;
#ifdef MAC_REPEATER_SUPPORT
ApCliCtrlMsg.BssIdx = ifIndex;
ApCliCtrlMsg.CliIdx = 0xFF;
#endif /* MAC_REPEATER_SUPPORT */
MlmeEnqueue(pAd, APCLI_CTRL_STATE_MACHINE, APCLI_CTRL_PROBE_RSP,
sizeof(APCLI_CTRL_MSG_STRUCT), &ApCliCtrlMsg, ifIndex);
}
#ifdef SMART_MESH_MONITOR
if(pFrame && (pFrame->Hdr.FC.SubType == SUBTYPE_PROBE_RSP))
{
struct nsmpif_drvevnt_buf drvevnt;
drvevnt.data.proberesp.type = NSMPIF_DRVEVNT_AP_PROBE_RESP;
drvevnt.data.proberesp.channel = ie_list->Channel;
COPY_MAC_ADDR(drvevnt.data.proberesp.ap_mac, ie_list->Addr2);
drvevnt.data.proberesp.is_ucast = 1;
drvevnt.data.proberesp.rate = pAd->LastMgmtRxRate;
drvevnt.data.proberesp.rssi = RealRssi;
drvevnt.data.proberesp.snr = ConvertToSnr(pAd, Elem->Signal);
#ifdef RTMP_MAC
if (pAd->chipCap.hif_type == HIF_RTMP)
{
if (IS_RT6352(pAd))
{
if ((42 - drvevnt.data.proberesp.snr) >= 0)
drvevnt.data.proberesp.snr = (42 - drvevnt.data.proberesp.snr);
else
drvevnt.data.proberesp.snr = 0;
}
}
#endif /* RTMP_MAC */
NdisZeroMemory(drvevnt.data.proberesp.ssid,sizeof(drvevnt.data.proberesp.ssid));
NdisCopyMemory(drvevnt.data.proberesp.ssid,ie_list->Ssid,ie_list->SsidLen);
drvevnt.data.proberesp.cap = 0;
#ifdef DOT11_N_SUPPORT
if(ie_list->HtCapabilityLen > 0)
drvevnt.data.proberesp.cap |= NSMP_WLCAP_80211_N;
#endif /* DOT11_N_SUPPORT */
#ifdef DOT11_VHT_AC
if (ie_list->vht_cap_len > 0)
drvevnt.data.proberesp.cap |= NSMP_WLCAP_80211_AC;
#endif /* DOT11_VHT_AC */
// Bandwdith
if (ie_list->HtCapability.HtCapInfo.ChannelWidth == BW_40)
{
#ifdef DOT11_VHT_AC
if(ie_list->vht_op_len > 0 && ie_list->vht_op_ie.vht_op_info.ch_width >= 1)
drvevnt.data.proberesp.cap |= NSMP_WLCAP_HT80;
else
#endif /* DOT11_VHT_AC */
drvevnt.data.proberesp.cap |= NSMP_WLCAP_HT40;
}
// RX/TX STREAM
drvevnt.data.proberesp.cap |= \
(ie_list->HtCapability.MCSSet[3] != 0x00) ? (NSMP_WLCAP_RX_4_STREAMS|NSMP_WLCAP_TX_4_STREAMS) :\
(ie_list->HtCapability.MCSSet[2] != 0x00) ? (NSMP_WLCAP_RX_3_STREAMS|NSMP_WLCAP_TX_3_STREAMS) :\
(ie_list->HtCapability.MCSSet[1] != 0x00) ? (NSMP_WLCAP_RX_2_STREAMS|NSMP_WLCAP_TX_2_STREAMS) : 0;
/* Vendor information element */
drvevnt.data.proberesp.ntgr_vie_len = ie_list->vendor_ie_len;
NdisZeroMemory(drvevnt.data.proberesp.ntgr_vie,sizeof(drvevnt.data.proberesp.ntgr_vie));
if(ie_list->vendor_ie_len > 0)
NdisCopyMemory(drvevnt.data.proberesp.ntgr_vie,ie_list->vendor_ie,ie_list->vendor_ie_len);
RtmpOSWrielessEventSend(pAd->net_dev, RT_WLAN_EVENT_CUSTOM,NSMPIF_DRVEVNT_AP_PROBE_RESP,
NULL, (PUCHAR)&drvevnt.data.proberesp, sizeof(drvevnt.data.proberesp));
}
#endif /* SMART_MESH_MONITOR */
}
}
LabelErr:
if (VarIE != NULL)
os_free_mem(NULL, VarIE);
if (ie_list != NULL)
os_free_mem(NULL, ie_list);
return;
}