static int s3c2410_init(struct nand_device *nand)
{
struct target *target = nand->target;
target_write_u32(target, S3C2410_NFCONF,
S3C2410_NFCONF_EN | S3C2410_NFCONF_TACLS(3) |
S3C2410_NFCONF_TWRPH0(5) | S3C2410_NFCONF_TWRPH1(3));
return ERROR_OK;
}
int s3c2410_init(struct nand_device_s *device)
{
s3c24xx_nand_controller_t *s3c24xx_info = device->controller_priv;
target_t *target = s3c24xx_info->target;
target_write_u32(target, S3C2410_NFCONF,
S3C2410_NFCONF_EN | S3C2410_NFCONF_TACLS(3) |
S3C2410_NFCONF_TWRPH0(5) | S3C2410_NFCONF_TWRPH1(3));
return ERROR_OK;
}
int board_nand_init(struct nand_chip *nand)
{
u_int32_t cfg;
u_int8_t tacls, twrph0, twrph1;
struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
struct s3c24x0_nand *nand_reg = s3c24x0_get_base_nand();
debug("board_nand_init()\n");
writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon);
/* initialize hardware */
#if defined(CONFIG_S3C24XX_CUSTOM_NAND_TIMING)
tacls = CONFIG_S3C24XX_TACLS;
twrph0 = CONFIG_S3C24XX_TWRPH0;
twrph1 = CONFIG_S3C24XX_TWRPH1;
#else
tacls = 4;
twrph0 = 8;
twrph1 = 8;
#endif
cfg = S3C2410_NFCONF_EN;
cfg |= S3C2410_NFCONF_TACLS(tacls - 1);
cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
writel(cfg, &nand_reg->nfconf);
/* initialize nand_chip data structure */
nand->IO_ADDR_R = (void *)&nand_reg->nfdata;
nand->IO_ADDR_W = (void *)&nand_reg->nfdata;
nand->select_chip = NULL;
/* read_buf and write_buf are default */
/* read_byte and write_byte are default */
#ifdef CONFIG_NAND_SPL
nand->read_buf = nand_read_buf;
#endif
/* hwcontrol always must be implemented */
nand->cmd_ctrl = s3c24x0_hwcontrol;
nand->dev_ready = s3c24x0_dev_ready;
#ifdef CONFIG_S3C2410_NAND_HWECC
nand->ecc.hwctl = s3c24x0_nand_enable_hwecc;
nand->ecc.calculate = s3c24x0_nand_calculate_ecc;
nand->ecc.correct = s3c24x0_nand_correct_data;
nand->ecc.mode = NAND_ECC_HW;
nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
nand->ecc.strength = 1;
#else
nand->ecc.mode = NAND_ECC_SOFT;
#endif
#ifdef CONFIG_S3C2410_NAND_BBT
nand->bbt_options |= NAND_BBT_USE_FLASH;
#endif
debug("end of nand_init\n");
return 0;
}
int board_nand_init(struct nand_chip *nand)
{
#if 0
u_int32_t cfg;
u_int8_t tacls, twrph0, twrph1;
struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
struct s3c2410_nand *nand_reg = s3c2410_get_base_nand();
debug("board_nand_init()\n");
writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon);
/* initialize hardware */
#if defined(CONFIG_S3C24XX_CUSTOM_NAND_TIMING)
tacls = CONFIG_S3C24XX_TACLS;
twrph0 = CONFIG_S3C24XX_TWRPH0;
twrph1 = CONFIG_S3C24XX_TWRPH1;
#else
tacls = 4;
twrph0 = 8;
twrph1 = 8;
#endif
cfg = S3C2410_NFCONF_EN;
cfg |= S3C2410_NFCONF_TACLS(tacls - 1);
cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
writel(cfg, &nand_reg->nfconf);
#endif
#define MP0_1CON (*(volatile unsigned int *)0xE02002E0)
#define MP0_3CON (*(volatile unsigned int *)0xE0200320)
#define NFCONF (*(volatile unsigned int *)0xB0E00000)
#define NFCONT (*(volatile unsigned int *)0xB0E00004)
#define NFCMMD (*(volatile unsigned char *)0xB0E00008)
#define NFADDR (*(volatile unsigned char *)0xB0E0000C)
#define NFDATA (*(volatile unsigned char *)0xB0E00010)
#define NFSTAT (*(volatile unsigned int *)0xB0E00028)
#define NFCONF_VAL ((7<<12)|(7<<8)|(7<<4)|(0<<3)|(0<<2)|(1<<1))
#define NFCONT_VAL ((1<<23)|(1<<22)|(1<<2)|(0<<1)|(1<<0))
unsigned int tmp;
//tmp = MP0_1CON;
//tmp &= ~((0xf<<8)|(0xf<<12));
//tmp |= (0x3<<8) | (0x3<<12);
//MP0_1CON = tmp;
tmp = MP0_1CON;
tmp &= ~(0xf<<16);
tmp |= (0x3<<16);
MP0_1CON = tmp;
tmp = MP0_3CON;
//tmp &= ~((0xf<<0)|(0xf<<4)|(0xf<<8)|(0xf<<12)|(0xf<<16)|(0xf<<20));
//tmp |= (0x2<<0)|(0x2<<4)|(0x2<<8)|(0x2<<12)|(0x2<<16)|(0x2<<20);
tmp &= ~((0xf<<0)|(0xf<<4)|(0xf<<8)|(0xf<<12)|(0xf<<16));
tmp |= (0x2<<0)|(0x2<<4)|(0x2<<8)|(0x2<<12)|(0x2<<16);
MP0_3CON = tmp;
NFCONF = NFCONF_VAL;
NFCONT = NFCONT_VAL;
/* initialize nand_chip data structure */
nand->IO_ADDR_R = (volatile unsigned char *)0xB0E00010;
nand->IO_ADDR_W = (volatile unsigned char *)0xB0E00010;
nand->select_chip = s5pv210_select_chip;
/* read_buf and write_buf are default */
/* read_byte and write_byte are default */
#ifdef CONFIG_NAND_SPL
nand->read_buf = nand_read_buf;
#endif
/* hwcontrol always must be implemented */
nand->cmd_ctrl = s3c2410_hwcontrol;
nand->dev_ready = s3c2410_dev_ready;
#ifdef CONFIG_S3C2410_NAND_HWECC
nand->ecc.hwctl = s3c2410_nand_enable_hwecc;
nand->ecc.calculate = s3c2410_nand_calculate_ecc;
nand->ecc.correct = s3c2410_nand_correct_data;
nand->ecc.mode = NAND_ECC_HW;
nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
nand->ecc.strength = 1;
#else
nand->ecc.mode = NAND_ECC_SOFT;
#endif
#ifdef CONFIG_S3C2410_NAND_BBT
nand->bbt_options |= NAND_BBT_USE_FLASH;
#endif
debug("end of nand_init\n");
return 0;
}
void s3c2410_nfc_init(struct nand_chip * chip)
{
writel(S3C2410_NFCONF, S3C2410_NFCONF_EN | S3C2410_NFCONF_TACLS(3) |S3C2410_NFCONF_TWRPH0(5) | S3C2410_NFCONF_TWRPH1(3));
}
