void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
s3c_gpio_cfgpin(S5PC100_GPD(3), S3C_GPIO_SFN(2));
s3c_gpio_setpull(S5PC100_GPD(3), S3C_GPIO_PULL_UP);
s3c_gpio_cfgpin(S5PC100_GPD(4), S3C_GPIO_SFN(2));
s3c_gpio_setpull(S5PC100_GPD(4), S3C_GPIO_PULL_UP);
}
static int smdkc100_backlight_init(struct device *dev)
{
int ret;
ret = gpio_request(S5PC100_GPD(0), "Backlight");
if (ret) {
printk(KERN_ERR "failed to request GPF for PWM-OUT0\n");
return ret;
}
/* Configure GPIO pin with S5PC100_GPD_TOUT_0 */
s3c_gpio_cfgpin(S5PC100_GPD(0), S3C_GPIO_SFN(2));
return 0;
}
/* LCD power controller */
static void smdkc100_lcd_power_set(struct plat_lcd_data *pd,
unsigned int power)
{
/* backlight */
gpio_direction_output(S5PC100_GPD(0), power);
if (power) {
/* module reset */
gpio_direction_output(S5PC100_GPH0(6), 1);
mdelay(100);
gpio_direction_output(S5PC100_GPH0(6), 0);
mdelay(10);
gpio_direction_output(S5PC100_GPH0(6), 1);
mdelay(10);
}
}
static void __init smdkc100_machine_init(void)
{
/* I2C */
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
s3c_fb_set_platdata(&smdkc100_lcd_pdata);
/* LCD init */
gpio_request(S5PC100_GPD(0), "GPD");
gpio_request(S5PC100_GPH0(6), "GPH0");
smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0);
platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
}
&s3c_device_rtc,
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
&s5pc100_device_spdif,
};
static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
.delay = 10000,
.presc = 49,
.oversampling_shift = 2,
};
/* LCD Backlight data */
static struct samsung_bl_gpio_info smdkc100_bl_gpio_info = {
.no = S5PC100_GPD(0),
.func = S3C_GPIO_SFN(2),
};
static struct platform_pwm_backlight_data smdkc100_bl_data = {
.pwm_id = 0,
};
static void __init smdkc100_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
}
static void __init smdkc100_machine_init(void)
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
{
s3c_gpio_cfgall_range(S5PC100_GPD(5), 2,
S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
}
static void smdkc100_backlight_exit(struct device *dev)
{
s3c_gpio_cfgpin(S5PC100_GPD(0), S3C_GPIO_OUTPUT);
gpio_free(S5PC100_GPD(0));
}
/* S/PDIF Controller platform_device */
static int s5pc100_spdif_cfg_gpd(struct platform_device *pdev)
{
s3c_gpio_cfgpin_range(S5PC100_GPD(5), 2, S3C_GPIO_SFN(3));
return 0;
}
.ngpio = S5PC100_GPIO_B_NR,
.label = "GPB",
},
}, {
.base = S5PC100_GPC_BASE,
.config = &gpio_cfg,
.chip = {
.base = S5PC100_GPC(0),
.ngpio = S5PC100_GPIO_C_NR,
.label = "GPC",
},
}, {
.base = S5PC100_GPD_BASE,
.config = &gpio_cfg,
.chip = {
.base = S5PC100_GPD(0),
.ngpio = S5PC100_GPIO_D_NR,
.label = "GPD",
},
}, {
.base = S5PC100_GPE0_BASE,
.config = &gpio_cfg,
.chip = {
.base = S5PC100_GPE0(0),
.ngpio = S5PC100_GPIO_E0_NR,
.label = "GPE0",
},
}, {
.base = S5PC100_GPE1_BASE,
.config = &gpio_cfg,
.chip = {
