static int Audio_Available(void)
{
int fd;
int available;
available = 0;
fd = SDL_OpenAudioPath(NULL, 0, OPEN_FLAGS, 0);
if ( fd >= 0 ) {
available = 1;
close(fd);
}
return(available);
}
static int Audio_Available(void)
{
int available;
int fd;
available = 0;
fd = SDL_OpenAudioPath(NULL, 0, OPEN_FLAGS, 0);
if ( fd >= 0 ) {
int caps;
struct audio_buf_info info;
if ( (ioctl(fd, SNDCTL_DSP_GETCAPS, &caps) == 0) &&
(caps & DSP_CAP_TRIGGER) && (caps & DSP_CAP_MMAP) &&
(ioctl(fd, SNDCTL_DSP_GETOSPACE, &info) == 0) ) {
available = 1;
}
close(fd);
}
return(available);
}
static int DMA_OpenAudio(_THIS, SDL_AudioSpec *spec)
{
char audiodev[1024];
int format;
int stereo;
int value;
Uint16 test_format;
struct audio_buf_info info;
/* Reset the timer synchronization flag */
frame_ticks = 0.0;
/* Open the audio device */
audio_fd = SDL_OpenAudioPath(audiodev, sizeof(audiodev), OPEN_FLAGS, 0);
if ( audio_fd < 0 ) {
SDL_SetError("Couldn't open %s: %s", audiodev, strerror(errno));
return(-1);
}
dma_buf = NULL;
ioctl(audio_fd, SNDCTL_DSP_RESET, 0);
/* Get a list of supported hardware formats */
if ( ioctl(audio_fd, SNDCTL_DSP_GETFMTS, &value) < 0 ) {
SDL_SetError("Couldn't get audio format list");
return(-1);
}
/* Try for a closest match on audio format */
format = 0;
for ( test_format = SDL_FirstAudioFormat(spec->format);
! format && test_format; ) {
#ifdef DEBUG_AUDIO
fprintf(stderr, "Trying format 0x%4.4x\n", test_format);
#endif
switch ( test_format ) {
case AUDIO_U8:
if ( value & AFMT_U8 ) {
format = AFMT_U8;
}
break;
case AUDIO_S8:
if ( value & AFMT_S8 ) {
format = AFMT_S8;
}
break;
case AUDIO_S16LSB:
if ( value & AFMT_S16_LE ) {
format = AFMT_S16_LE;
}
break;
case AUDIO_S16MSB:
if ( value & AFMT_S16_BE ) {
format = AFMT_S16_BE;
}
break;
case AUDIO_U16LSB:
if ( value & AFMT_U16_LE ) {
format = AFMT_U16_LE;
}
break;
case AUDIO_U16MSB:
if ( value & AFMT_U16_BE ) {
format = AFMT_U16_BE;
}
break;
default:
format = 0;
break;
}
if ( ! format ) {
test_format = SDL_NextAudioFormat();
}
}
if ( format == 0 ) {
SDL_SetError("Couldn't find any hardware audio formats");
return(-1);
}
spec->format = test_format;
/* Set the audio format */
value = format;
if ( (ioctl(audio_fd, SNDCTL_DSP_SETFMT, &value) < 0) ||
(value != format) ) {
SDL_SetError("Couldn't set audio format");
return(-1);
}
/* Set mono or stereo audio (currently only two channels supported) */
stereo = (spec->channels > 1);
ioctl(audio_fd, SNDCTL_DSP_STEREO, &stereo);
if ( stereo ) {
spec->channels = 2;
} else {
spec->channels = 1;
}
/* Because some drivers don't allow setting the buffer size
after setting the format, we must re-open the audio device
once we know what format and channels are supported
*/
if ( DMA_ReopenAudio(this, audiodev, format, stereo, spec) < 0 ) {
/* Error is set by DMA_ReopenAudio() */
return(-1);
}
/* Memory map the audio buffer */
if ( ioctl(audio_fd, SNDCTL_DSP_GETOSPACE, &info) < 0 ) {
SDL_SetError("Couldn't get OSPACE parameters");
return(-1);
}
spec->size = info.fragsize;
spec->samples = spec->size / ((spec->format & 0xFF) / 8);
spec->samples /= spec->channels;
num_buffers = info.fragstotal;
dma_len = num_buffers*spec->size;
dma_buf = (Uint8 *)mmap(NULL, dma_len, PROT_WRITE, MAP_SHARED,
audio_fd, 0);
if ( dma_buf == MAP_FAILED ) {
SDL_SetError("DMA memory map failed");
dma_buf = NULL;
return(-1);
}
SDL_memset(dma_buf, spec->silence, dma_len);
/* Check to see if we need to use select() workaround */
{ char *workaround;
workaround = SDL_getenv("SDL_DSP_NOSELECT");
if ( workaround ) {
frame_ticks = (float)(spec->samples*1000)/spec->freq;
next_frame = SDL_GetTicks()+frame_ticks;
}
}
/* Trigger audio playback */
value = 0;
ioctl(audio_fd, SNDCTL_DSP_SETTRIGGER, &value);
value = PCM_ENABLE_OUTPUT;
if ( ioctl(audio_fd, SNDCTL_DSP_SETTRIGGER, &value) < 0 ) {
SDL_SetError("Couldn't trigger audio output");
return(-1);
}
/* Get the parent process id (we're the parent of the audio thread) */
parent = getpid();
/* We're ready to rock and roll. :-) */
return(0);
}
static int DSP_OpenAudio(_THIS, SDL_AudioSpec *spec)
{
char audiodev[1024];
int format;
int value;
Uint16 test_format;
/* Reset the timer synchronization flag */
frame_ticks = 0.0;
/* Open the audio device */
audio_fd = SDL_OpenAudioPath(audiodev, sizeof(audiodev), OPEN_FLAGS, 0);
if ( audio_fd < 0 ) {
SDL_SetError("Couldn't open %s: %s", audiodev, strerror(errno));
return(-1);
}
mixbuf = NULL;
#ifdef USE_BLOCKING_WRITES
/* Make the file descriptor use blocking writes with fcntl() */
{ long flags;
flags = fcntl(audio_fd, F_GETFL);
flags &= ~O_NONBLOCK;
if ( fcntl(audio_fd, F_SETFL, flags) < 0 ) {
SDL_SetError("Couldn't set audio blocking mode");
return(-1);
}
}
#endif
/* Get a list of supported hardware formats */
if ( ioctl(audio_fd, SNDCTL_DSP_GETFMTS, &value) < 0 ) {
SDL_SetError("Couldn't get audio format list");
return(-1);
}
/* Try for a closest match on audio format */
format = 0;
for ( test_format = SDL_FirstAudioFormat(spec->format);
! format && test_format; ) {
#ifdef DEBUG_AUDIO
fprintf(stderr, "Trying format 0x%4.4x\n", test_format);
#endif
switch ( test_format ) {
case AUDIO_U8:
if ( value & AFMT_U8 ) {
format = AFMT_U8;
}
break;
case AUDIO_S8:
if ( value & AFMT_S8 ) {
format = AFMT_S8;
}
break;
case AUDIO_S16LSB:
if ( value & AFMT_S16_LE ) {
format = AFMT_S16_LE;
}
break;
case AUDIO_S16MSB:
if ( value & AFMT_S16_BE ) {
format = AFMT_S16_BE;
}
break;
case AUDIO_U16LSB:
if ( value & AFMT_U16_LE ) {
format = AFMT_U16_LE;
}
break;
case AUDIO_U16MSB:
if ( value & AFMT_U16_BE ) {
format = AFMT_U16_BE;
}
break;
default:
format = 0;
break;
}
if ( ! format ) {
test_format = SDL_NextAudioFormat();
}
}
if ( format == 0 ) {
SDL_SetError("Couldn't find any hardware audio formats");
return(-1);
}
spec->format = test_format;
/* Set the audio format */
value = format;
if ( (ioctl(audio_fd, SNDCTL_DSP_SETFMT, &value) < 0) ||
(value != format) ) {
SDL_SetError("Couldn't set audio format");
return(-1);
}
/* Set the number of channels of output */
value = spec->channels;
#ifdef SNDCTL_DSP_CHANNELS
if ( ioctl(audio_fd, SNDCTL_DSP_CHANNELS, &value) < 0 ) {
#endif
value = (spec->channels > 1);
ioctl(audio_fd, SNDCTL_DSP_STEREO, &value);
value = (value ? 2 : 1);
#ifdef SNDCTL_DSP_CHANNELS
}
#endif
spec->channels = value;
/* Because some drivers don't allow setting the buffer size
after setting the format, we must re-open the audio device
once we know what format and channels are supported
*/
if ( DSP_ReopenAudio(this, audiodev, format, spec) < 0 ) {
/* Error is set by DSP_ReopenAudio() */
return(-1);
}
/* Allocate mixing buffer */
mixlen = spec->size;
mixbuf = (Uint8 *)SDL_AllocAudioMem(mixlen);
if ( mixbuf == NULL ) {
return(-1);
}
memset(mixbuf, spec->silence, spec->size);
#ifndef USE_BLOCKING_WRITES
/* Check to see if we need to use select() workaround */
{ char *workaround;
workaround = getenv("SDL_DSP_NOSELECT");
if ( workaround ) {
frame_ticks = (float)(spec->samples*1000)/spec->freq;
next_frame = SDL_GetTicks()+frame_ticks;
}
}
#endif /* !USE_BLOCKING_WRITES */
/* Get the parent process id (we're the parent of the audio thread) */
parent = getpid();
/* We're ready to rock and roll. :-) */
return(0);
}
int
DSP_OpenAudio(_THIS, SDL_AudioSpec * spec)
{
char audiodev[1024];
#ifdef AUDIO_SETINFO
int enc;
#endif
int desired_freq = spec->freq;
/* Initialize our freeable variables, in case we fail */
audio_fd = -1;
mixbuf = NULL;
ulaw_buf = NULL;
/* Determine the audio parameters from the AudioSpec */
switch (SDL_AUDIO_BITSIZE(spec->format)) {
case 8:
{ /* Unsigned 8 bit audio data */
spec->format = AUDIO_U8;
#ifdef AUDIO_SETINFO
enc = AUDIO_ENCODING_LINEAR8;
#endif
}
break;
case 16:
{ /* Signed 16 bit audio data */
spec->format = AUDIO_S16SYS;
#ifdef AUDIO_SETINFO
enc = AUDIO_ENCODING_LINEAR;
#endif
}
break;
default:
{
/* !!! FIXME: fallback to conversion on unsupported types! */
SDL_SetError("Unsupported audio format");
return (-1);
}
}
audio_fmt = spec->format;
/* Open the audio device */
audio_fd = SDL_OpenAudioPath(audiodev, sizeof(audiodev), OPEN_FLAGS, 1);
if (audio_fd < 0) {
SDL_SetError("Couldn't open %s: %s", audiodev, strerror(errno));
return (-1);
}
ulaw_only = 0; /* modern Suns do support linear audio */
#ifdef AUDIO_SETINFO
for (;;) {
audio_info_t info;
AUDIO_INITINFO(&info); /* init all fields to "no change" */
/* Try to set the requested settings */
info.play.sample_rate = spec->freq;
info.play.channels = spec->channels;
info.play.precision = (enc == AUDIO_ENCODING_ULAW)
? 8 : spec->format & 0xff;
info.play.encoding = enc;
if (ioctl(audio_fd, AUDIO_SETINFO, &info) == 0) {
/* Check to be sure we got what we wanted */
if (ioctl(audio_fd, AUDIO_GETINFO, &info) < 0) {
SDL_SetError("Error getting audio parameters: %s",
strerror(errno));
return -1;
}
if (info.play.encoding == enc
&& info.play.precision == (spec->format & 0xff)
&& info.play.channels == spec->channels) {
/* Yow! All seems to be well! */
spec->freq = info.play.sample_rate;
break;
}
}
switch (enc) {
case AUDIO_ENCODING_LINEAR8:
/* unsigned 8bit apparently not supported here */
enc = AUDIO_ENCODING_LINEAR;
spec->format = AUDIO_S16SYS;
break; /* try again */
case AUDIO_ENCODING_LINEAR:
/* linear 16bit didn't work either, resort to µ-law */
enc = AUDIO_ENCODING_ULAW;
spec->channels = 1;
spec->freq = 8000;
spec->format = AUDIO_U8;
ulaw_only = 1;
break;
default:
/* oh well... */
SDL_SetError("Error setting audio parameters: %s",
strerror(errno));
return -1;
}
}
#endif /* AUDIO_SETINFO */
written = 0;
/* We can actually convert on-the-fly to U-Law */
if (ulaw_only) {
spec->freq = desired_freq;
fragsize = (spec->samples * 1000) / (spec->freq / 8);
frequency = 8;
ulaw_buf = (Uint8 *) SDL_malloc(fragsize);
if (ulaw_buf == NULL) {
SDL_OutOfMemory();
return (-1);
}
spec->channels = 1;
} else {
fragsize = spec->samples;
frequency = spec->freq / 1000;
}
#ifdef DEBUG_AUDIO
fprintf(stderr, "Audio device %s U-Law only\n",
ulaw_only ? "is" : "is not");
fprintf(stderr, "format=0x%x chan=%d freq=%d\n",
spec->format, spec->channels, spec->freq);
#endif
/* Update the fragment size as size in bytes */
SDL_CalculateAudioSpec(spec);
/* Allocate mixing buffer */
mixbuf = (Uint8 *) SDL_AllocAudioMem(spec->size);
if (mixbuf == NULL) {
SDL_OutOfMemory();
return (-1);
}
SDL_memset(mixbuf, spec->silence, spec->size);
/* We're ready to rock and roll. :-) */
return (0);
}
static int DSP_OpenAudio(_THIS, SDL_AudioSpec *spec)
{
char audiodev[1024];
int format;
int value;
int frag_spec;
Uint16 test_format;
/* Open the audio device */
audio_fd = SDL_OpenAudioPath(audiodev, sizeof(audiodev), OPEN_FLAGS, 0);
if ( audio_fd < 0 ) {
SDL_SetError("Couldn't open %s: %s", audiodev, strerror(errno));
return(-1);
}
mixbuf = NULL;
/* Make the file descriptor use blocking writes with fcntl() */
{ long flags;
flags = fcntl(audio_fd, F_GETFL);
flags &= ~O_NONBLOCK;
if ( fcntl(audio_fd, F_SETFL, flags) < 0 ) {
SDL_SetError("Couldn't set audio blocking mode");
return(-1);
}
}
/* Get a list of supported hardware formats */
if ( ioctl(audio_fd, SNDCTL_DSP_GETFMTS, &value) < 0 ) {
perror("SNDCTL_DSP_GETFMTS");
SDL_SetError("Couldn't get audio format list");
return(-1);
}
/* Try for a closest match on audio format */
format = 0;
for ( test_format = SDL_FirstAudioFormat(spec->format);
! format && test_format; ) {
#ifdef DEBUG_AUDIO
fprintf(stderr, "Trying format 0x%4.4x\n", test_format);
#endif
switch ( test_format ) {
case AUDIO_U8:
if ( value & AFMT_U8 ) {
format = AFMT_U8;
}
break;
case AUDIO_S16LSB:
if ( value & AFMT_S16_LE ) {
format = AFMT_S16_LE;
}
break;
case AUDIO_S16MSB:
if ( value & AFMT_S16_BE ) {
format = AFMT_S16_BE;
}
break;
#if 0
/*
* These formats are not used by any real life systems so they are not
* needed here.
*/
case AUDIO_S8:
if ( value & AFMT_S8 ) {
format = AFMT_S8;
}
break;
case AUDIO_U16LSB:
if ( value & AFMT_U16_LE ) {
format = AFMT_U16_LE;
}
break;
case AUDIO_U16MSB:
if ( value & AFMT_U16_BE ) {
format = AFMT_U16_BE;
}
break;
#endif
default:
format = 0;
break;
}
if ( ! format ) {
test_format = SDL_NextAudioFormat();
}
}
if ( format == 0 ) {
SDL_SetError("Couldn't find any hardware audio formats");
return(-1);
}
spec->format = test_format;
/* Set the audio format */
value = format;
if ( (ioctl(audio_fd, SNDCTL_DSP_SETFMT, &value) < 0) ||
(value != format) ) {
perror("SNDCTL_DSP_SETFMT");
SDL_SetError("Couldn't set audio format");
return(-1);
}
/* Set the number of channels of output */
value = spec->channels;
if ( ioctl(audio_fd, SNDCTL_DSP_CHANNELS, &value) < 0 ) {
perror("SNDCTL_DSP_CHANNELS");
SDL_SetError("Cannot set the number of channels");
return(-1);
}
spec->channels = value;
/* Set the DSP frequency */
value = spec->freq;
if ( ioctl(audio_fd, SNDCTL_DSP_SPEED, &value) < 0 ) {
perror("SNDCTL_DSP_SPEED");
SDL_SetError("Couldn't set audio frequency");
return(-1);
}
spec->freq = value;
/* Calculate the final parameters for this audio specification */
SDL_CalculateAudioSpec(spec);
/* Determine the power of two of the fragment size */
for ( frag_spec = 0; (0x01<<frag_spec) < spec->size; ++frag_spec );
if ( (0x01<<frag_spec) != spec->size ) {
SDL_SetError("Fragment size must be a power of two");
return(-1);
}
frag_spec |= 0x00020000; /* two fragments, for low latency */
/* Set the audio buffering parameters */
#ifdef DEBUG_AUDIO
fprintf(stderr, "Requesting %d fragments of size %d\n",
(frag_spec >> 16), 1<<(frag_spec&0xFFFF));
#endif
if ( ioctl(audio_fd, SNDCTL_DSP_SETFRAGMENT, &frag_spec) < 0 ) {
perror("SNDCTL_DSP_SETFRAGMENT");
fprintf(stderr, "Warning: Couldn't set audio fragment size\n");
}
#ifdef DEBUG_AUDIO
{ audio_buf_info info;
ioctl(audio_fd, SNDCTL_DSP_GETOSPACE, &info);
fprintf(stderr, "fragments = %d\n", info.fragments);
fprintf(stderr, "fragstotal = %d\n", info.fragstotal);
fprintf(stderr, "fragsize = %d\n", info.fragsize);
fprintf(stderr, "bytes = %d\n", info.bytes);
}
#endif
/* Allocate mixing buffer */
mixlen = spec->size;
mixbuf = (Uint8 *)SDL_AllocAudioMem(mixlen);
if ( mixbuf == NULL ) {
return(-1);
}
memset(mixbuf, spec->silence, spec->size);
/* Get the parent process id (we're the parent of the audio thread) */
parent = getpid();
/* We're ready to rock and roll. :-) */
return(0);
}
static int Paud_OpenAudio(_THIS, SDL_AudioSpec *spec)
{
char audiodev[1024];
int format;
int bytes_per_sample;
Uint16 test_format;
audio_init paud_init;
audio_buffer paud_bufinfo;
audio_status paud_status;
audio_control paud_control;
audio_change paud_change;
/* Reset the timer synchronization flag */
frame_ticks = 0.0;
/* Open the audio device */
audio_fd = SDL_OpenAudioPath(audiodev, sizeof(audiodev), OPEN_FLAGS, 0);
if ( audio_fd < 0 ) {
SDL_SetError("Couldn't open %s: %s", audiodev, strerror(errno));
return -1;
}
/*
* We can't set the buffer size - just ask the device for the maximum
* that we can have.
*/
if ( ioctl(audio_fd, AUDIO_BUFFER, &paud_bufinfo) < 0 ) {
SDL_SetError("Couldn't get audio buffer information");
return -1;
}
mixbuf = NULL;
if ( spec->channels > 1 )
spec->channels = 2;
else
spec->channels = 1;
/*
* Fields in the audio_init structure:
*
* Ignored by us:
*
* paud.loadpath[LOAD_PATH]; * DSP code to load, MWave chip only?
* paud.slot_number; * slot number of the adapter
* paud.device_id; * adapter identification number
*
* Input:
*
* paud.srate; * the sampling rate in Hz
* paud.bits_per_sample; * 8, 16, 32, ...
* paud.bsize; * block size for this rate
* paud.mode; * ADPCM, PCM, MU_LAW, A_LAW, SOURCE_MIX
* paud.channels; * 1=mono, 2=stereo
* paud.flags; * FIXED - fixed length data
* * LEFT_ALIGNED, RIGHT_ALIGNED (var len only)
* * TWOS_COMPLEMENT - 2's complement data
* * SIGNED - signed? comment seems wrong in sys/audio.h
* * BIG_ENDIAN
* paud.operation; * PLAY, RECORD
*
* Output:
*
* paud.flags; * PITCH - pitch is supported
* * INPUT - input is supported
* * OUTPUT - output is supported
* * MONITOR - monitor is supported
* * VOLUME - volume is supported
* * VOLUME_DELAY - volume delay is supported
* * BALANCE - balance is supported
* * BALANCE_DELAY - balance delay is supported
* * TREBLE - treble control is supported
* * BASS - bass control is supported
* * BESTFIT_PROVIDED - best fit returned
* * LOAD_CODE - DSP load needed
* paud.rc; * NO_PLAY - DSP code can't do play requests
* * NO_RECORD - DSP code can't do record requests
* * INVALID_REQUEST - request was invalid
* * CONFLICT - conflict with open's flags
* * OVERLOADED - out of DSP MIPS or memory
* paud.position_resolution; * smallest increment for position
*/
paud_init.srate = spec->freq;
paud_init.mode = PCM;
paud_init.operation = PLAY;
paud_init.channels = spec->channels;
/* Try for a closest match on audio format */
format = 0;
for ( test_format = SDL_FirstAudioFormat(spec->format);
! format && test_format; ) {
#ifdef DEBUG_AUDIO
fprintf(stderr, "Trying format 0x%4.4x\n", test_format);
#endif
switch ( test_format ) {
case AUDIO_U8:
bytes_per_sample = 1;
paud_init.bits_per_sample = 8;
paud_init.flags = TWOS_COMPLEMENT | FIXED;
format = 1;
break;
case AUDIO_S8:
bytes_per_sample = 1;
paud_init.bits_per_sample = 8;
paud_init.flags = SIGNED |
TWOS_COMPLEMENT | FIXED;
format = 1;
break;
case AUDIO_S16LSB:
bytes_per_sample = 2;
paud_init.bits_per_sample = 16;
paud_init.flags = SIGNED |
TWOS_COMPLEMENT | FIXED;
format = 1;
break;
case AUDIO_S16MSB:
bytes_per_sample = 2;
paud_init.bits_per_sample = 16;
paud_init.flags = BIG_ENDIAN |
SIGNED |
TWOS_COMPLEMENT | FIXED;
format = 1;
break;
case AUDIO_U16LSB:
bytes_per_sample = 2;
paud_init.bits_per_sample = 16;
paud_init.flags = TWOS_COMPLEMENT | FIXED;
format = 1;
break;
case AUDIO_U16MSB:
bytes_per_sample = 2;
paud_init.bits_per_sample = 16;
paud_init.flags = BIG_ENDIAN |
TWOS_COMPLEMENT | FIXED;
format = 1;
break;
default:
break;
}
if ( ! format ) {
test_format = SDL_NextAudioFormat();
}
}
if ( format == 0 ) {
#ifdef DEBUG_AUDIO
fprintf(stderr, "Couldn't find any hardware audio formats\n");
#endif
SDL_SetError("Couldn't find any hardware audio formats");
return -1;
}
spec->format = test_format;
/*
* We know the buffer size and the max number of subsequent writes
* that can be pending. If more than one can pend, allow the application
* to do something like double buffering between our write buffer and
* the device's own buffer that we are filling with write() anyway.
*
* We calculate spec->samples like this because SDL_CalculateAudioSpec()
* will give put paud_bufinfo.write_buf_cap (or paud_bufinfo.write_buf_cap/2)
* into spec->size in return.
*/
if ( paud_bufinfo.request_buf_cap == 1 )
{
spec->samples = paud_bufinfo.write_buf_cap
/ bytes_per_sample
/ spec->channels;
}
else
{
spec->samples = paud_bufinfo.write_buf_cap
/ bytes_per_sample
/ spec->channels
/ 2;
}
paud_init.bsize = bytes_per_sample * spec->channels;
SDL_CalculateAudioSpec(spec);
/*
* The AIX paud device init can't modify the values of the audio_init
* structure that we pass to it. So we don't need any recalculation
* of this stuff and no reinit call as in linux dsp and dma code.
*
* /dev/paud supports all of the encoding formats, so we don't need
* to do anything like reopening the device, either.
*/
if ( ioctl(audio_fd, AUDIO_INIT, &paud_init) < 0 ) {
switch ( paud_init.rc )
{
case 1 :
SDL_SetError("Couldn't set audio format: DSP can't do play requests");
return -1;
break;
case 2 :
SDL_SetError("Couldn't set audio format: DSP can't do record requests");
return -1;
break;
case 4 :
SDL_SetError("Couldn't set audio format: request was invalid");
return -1;
break;
case 5 :
SDL_SetError("Couldn't set audio format: conflict with open's flags");
return -1;
break;
case 6 :
SDL_SetError("Couldn't set audio format: out of DSP MIPS or memory");
return -1;
break;
default :
SDL_SetError("Couldn't set audio format: not documented in sys/audio.h");
return -1;
break;
}
}
/* Allocate mixing buffer */
mixlen = spec->size;
mixbuf = (Uint8 *)SDL_AllocAudioMem(mixlen);
if ( mixbuf == NULL ) {
return -1;
}
SDL_memset(mixbuf, spec->silence, spec->size);
/*
* Set some paramters: full volume, first speaker that we can find.
* Ignore the other settings for now.
*/
paud_change.input = AUDIO_IGNORE; /* the new input source */
paud_change.output = OUTPUT_1; /* EXTERNAL_SPEAKER,INTERNAL_SPEAKER,OUTPUT_1 */
paud_change.monitor = AUDIO_IGNORE; /* the new monitor state */
paud_change.volume = 0x7fffffff; /* volume level [0-0x7fffffff] */
paud_change.volume_delay = AUDIO_IGNORE; /* the new volume delay */
paud_change.balance = 0x3fffffff; /* the new balance */
paud_change.balance_delay = AUDIO_IGNORE; /* the new balance delay */
paud_change.treble = AUDIO_IGNORE; /* the new treble state */
paud_change.bass = AUDIO_IGNORE; /* the new bass state */
paud_change.pitch = AUDIO_IGNORE; /* the new pitch state */
paud_control.ioctl_request = AUDIO_CHANGE;
paud_control.request_info = (char*)&paud_change;
if ( ioctl(audio_fd, AUDIO_CONTROL, &paud_control) < 0 ) {
#ifdef DEBUG_AUDIO
fprintf(stderr, "Can't change audio display settings\n" );
#endif
}
/*
* Tell the device to expect data. Actual start will wait for
* the first write() call.
*/
paud_control.ioctl_request = AUDIO_START;
paud_control.position = 0;
if ( ioctl(audio_fd, AUDIO_CONTROL, &paud_control) < 0 ) {
#ifdef DEBUG_AUDIO
fprintf(stderr, "Can't start audio play\n" );
#endif
SDL_SetError("Can't start audio play");
return -1;
}
/* Check to see if we need to use select() workaround */
{ char *workaround;
workaround = SDL_getenv("SDL_DSP_NOSELECT");
if ( workaround ) {
frame_ticks = (float)(spec->samples*1000)/spec->freq;
next_frame = SDL_GetTicks()+frame_ticks;
}
}
/* Get the parent process id (we're the parent of the audio thread) */
parent = getpid();
/* We're ready to rock and roll. :-) */
return 0;
}
static int
OBSD_OpenAudio(_THIS, SDL_AudioSpec *spec)
{
char audiodev[64];
Uint16 format;
audio_info_t info;
AUDIO_INITINFO(&info);
SDL_CalculateAudioSpec(spec);
#ifdef USE_TIMER_SYNC
frame_ticks = 0.0;
#endif
audio_fd = SDL_OpenAudioPath(audiodev, sizeof(audiodev), OPEN_FLAGS, 0);
if(audio_fd < 0) {
SDL_SetError("Couldn't open %s: %s", audiodev, strerror(errno));
return(-1);
}
info.mode = AUMODE_PLAY;
if(ioctl(audio_fd, AUDIO_SETINFO, &info) < 0) {
SDL_SetError("Couldn't put device into play mode");
return(-1);
}
mixbuf = NULL;
AUDIO_INITINFO(&info);
for (format = SDL_FirstAudioFormat(spec->format);
format; format = SDL_NextAudioFormat())
{
switch(format) {
case AUDIO_U8:
info.play.encoding = AUDIO_ENCODING_ULINEAR;
info.play.precision = 8;
break;
case AUDIO_S8:
info.play.encoding = AUDIO_ENCODING_SLINEAR;
info.play.precision = 8;
break;
case AUDIO_S16LSB:
info.play.encoding = AUDIO_ENCODING_SLINEAR_LE;
info.play.precision = 16;
break;
case AUDIO_S16MSB:
info.play.encoding = AUDIO_ENCODING_SLINEAR_BE;
info.play.precision = 16;
break;
case AUDIO_U16LSB:
info.play.encoding = AUDIO_ENCODING_ULINEAR_LE;
info.play.precision = 16;
break;
case AUDIO_U16MSB:
info.play.encoding = AUDIO_ENCODING_ULINEAR_BE;
info.play.precision = 16;
break;
default:
continue;
}
if (ioctl(audio_fd, AUDIO_SETINFO, &info) == 0)
break;
}
if(!format) {
SDL_SetError("No supported encoding for 0x%x", spec->format);
return(-1);
}
spec->format = format;
AUDIO_INITINFO(&info);
info.play.channels = spec->channels;
if (ioctl(audio_fd, AUDIO_SETINFO, &info) == -1)
spec->channels = 1;
AUDIO_INITINFO(&info);
info.play.sample_rate = spec->freq;
info.blocksize = spec->size;
info.hiwat = 5;
info.lowat = 3;
(void)ioctl(audio_fd, AUDIO_SETINFO, &info);
(void)ioctl(audio_fd, AUDIO_GETINFO, &info);
spec->freq = info.play.sample_rate;
mixlen = spec->size;
mixbuf = (Uint8*)SDL_AllocAudioMem(mixlen);
if(mixbuf == NULL) {
return(-1);
}
SDL_memset(mixbuf, spec->silence, spec->size);
parent = getpid();
#ifdef DEBUG_AUDIO
OBSD_Status(this);
#endif
return(0);
}
