/*
* Rename language
*/
void
RenameLanguage(const char *oldname, const char *newname)
{
HeapTuple tup;
Relation rel;
rel = heap_open(LanguageRelationId, RowExclusiveLock);
tup = SearchSysCacheCopy1(LANGNAME, CStringGetDatum(oldname));
if (!HeapTupleIsValid(tup))
ereport(ERROR,
(errcode(ERRCODE_UNDEFINED_OBJECT),
errmsg("language \"%s\" does not exist", oldname)));
/* make sure the new name doesn't exist */
if (SearchSysCacheExists1(LANGNAME, CStringGetDatum(newname)))
ereport(ERROR,
(errcode(ERRCODE_DUPLICATE_OBJECT),
errmsg("language \"%s\" already exists", newname)));
/* must be owner of PL */
if (!pg_language_ownercheck(HeapTupleGetOid(tup), GetUserId()))
aclcheck_error(ACLCHECK_NOT_OWNER, ACL_KIND_LANGUAGE,
oldname);
/* rename */
namestrcpy(&(((Form_pg_language) GETSTRUCT(tup))->lanname), newname);
simple_heap_update(rel, &tup->t_self, tup);
CatalogUpdateIndexes(rel, tup);
heap_close(rel, NoLock);
heap_freetuple(tup);
}
/**
* @brief Setting the number of tuples.
* @param relation_id relation id
* @param num_tuples number of tuples
*/
void Bridge::SetNumberOfTuples(Oid relation_id, float num_tuples) {
assert(relation_id);
Relation pg_class_rel;
HeapTuple tuple;
Form_pg_class pgclass;
// Open target table in exclusive mode
pg_class_rel = heap_open(RelationRelationId, RowExclusiveLock);
tuple = SearchSysCacheCopy1(RELOID, ObjectIdGetDatum(relation_id));
if (!HeapTupleIsValid(tuple)) {
elog(DEBUG2, "cache lookup failed for relation %u", relation_id);
} else {
pgclass = (Form_pg_class)GETSTRUCT(tuple);
pgclass->reltuples = (float4)num_tuples;
pgclass->relpages = (int32)1;
// update tuple
simple_heap_update(pg_class_rel, &tuple->t_self, tuple);
/* keep the catalog indexes up to date */
CatalogUpdateIndexes(pg_class_rel, tuple);
heap_freetuple(tuple);
}
heap_close(pg_class_rel, RowExclusiveLock);
}
/*
* SetRelationRuleStatus
* Set the value of the relation's relhasrules field in pg_class.
*
* NOTE: caller must be holding an appropriate lock on the relation.
*
* NOTE: an important side-effect of this operation is that an SI invalidation
* message is sent out to all backends --- including me --- causing relcache
* entries to be flushed or updated with the new set of rules for the table.
* This must happen even if we find that no change is needed in the pg_class
* row.
*/
void
SetRelationRuleStatus(Oid relationId, bool relHasRules)
{
Relation relationRelation;
HeapTuple tuple;
Form_pg_class classForm;
/*
* Find the tuple to update in pg_class, using syscache for the lookup.
*/
relationRelation = heap_open(RelationRelationId, RowExclusiveLock);
tuple = SearchSysCacheCopy1(RELOID, ObjectIdGetDatum(relationId));
if (!HeapTupleIsValid(tuple))
elog(ERROR, "cache lookup failed for relation %u", relationId);
classForm = (Form_pg_class) GETSTRUCT(tuple);
if (classForm->relhasrules != relHasRules)
{
/* Do the update */
classForm->relhasrules = relHasRules;
simple_heap_update(relationRelation, &tuple->t_self, tuple);
/* Keep the catalog indexes up to date */
CatalogUpdateIndexes(relationRelation, tuple);
}
else
{
/* no need to change tuple, but force relcache rebuild anyway */
CacheInvalidateRelcacheByTuple(tuple);
}
heap_freetuple(tuple);
heap_close(relationRelation, RowExclusiveLock);
}
/*
* SetMatViewPopulatedState
* Mark a materialized view as populated, or not.
*
* NOTE: caller must be holding an appropriate lock on the relation.
*/
void
SetMatViewPopulatedState(Relation relation, bool newstate)
{
Relation pgrel;
HeapTuple tuple;
Assert(relation->rd_rel->relkind == RELKIND_MATVIEW);
/*
* Update relation's pg_class entry. Crucial side-effect: other backends
* (and this one too!) are sent SI message to make them rebuild relcache
* entries.
*/
pgrel = table_open(RelationRelationId, RowExclusiveLock);
tuple = SearchSysCacheCopy1(RELOID,
ObjectIdGetDatum(RelationGetRelid(relation)));
if (!HeapTupleIsValid(tuple))
elog(ERROR, "cache lookup failed for relation %u",
RelationGetRelid(relation));
((Form_pg_class) GETSTRUCT(tuple))->relispopulated = newstate;
CatalogTupleUpdate(pgrel, &tuple->t_self, tuple);
heap_freetuple(tuple);
table_close(pgrel, RowExclusiveLock);
/*
* Advance command counter to make the updated pg_class row locally
* visible.
*/
CommandCounterIncrement();
}
/*
* RenameTypeInternal
* This renames a type, as well as any associated array type.
*
* Caller must have already checked privileges.
*
* Currently this is used for renaming table rowtypes and for
* ALTER TYPE RENAME TO command.
*/
void
RenameTypeInternal(Oid typeOid, const char *newTypeName, Oid typeNamespace)
{
Relation pg_type_desc;
HeapTuple tuple;
Form_pg_type typ;
Oid arrayOid;
pg_type_desc = heap_open(TypeRelationId, RowExclusiveLock);
tuple = SearchSysCacheCopy1(TYPEOID, ObjectIdGetDatum(typeOid));
if (!HeapTupleIsValid(tuple))
elog(ERROR, "cache lookup failed for type %u", typeOid);
typ = (Form_pg_type) GETSTRUCT(tuple);
/* We are not supposed to be changing schemas here */
Assert(typeNamespace == typ->typnamespace);
arrayOid = typ->typarray;
/* Just to give a more friendly error than unique-index violation */
if (SearchSysCacheExists2(TYPENAMENSP,
CStringGetDatum(newTypeName),
ObjectIdGetDatum(typeNamespace)))
ereport(ERROR,
(errcode(ERRCODE_DUPLICATE_OBJECT),
errmsg("type \"%s\" already exists", newTypeName)));
/* OK, do the rename --- tuple is a copy, so OK to scribble on it */
namestrcpy(&(typ->typname), newTypeName);
simple_heap_update(pg_type_desc, &tuple->t_self, tuple);
/* update the system catalog indexes */
CatalogUpdateIndexes(pg_type_desc, tuple);
InvokeObjectPostAlterHook(TypeRelationId, typeOid, 0);
heap_freetuple(tuple);
heap_close(pg_type_desc, RowExclusiveLock);
/* If the type has an array type, recurse to handle that */
if (OidIsValid(arrayOid))
{
char *arrname = makeArrayTypeName(newTypeName, typeNamespace);
RenameTypeInternal(arrayOid, arrname, typeNamespace);
pfree(arrname);
}
}
/*
* RenameConstraintById
* Rename a constraint.
*
* Note: this isn't intended to be a user-exposed function; it doesn't check
* permissions etc. Currently this is only invoked when renaming an index
* that is associated with a constraint, but it's made a little more general
* than that with the expectation of someday having ALTER TABLE RENAME
* CONSTRAINT.
*/
void
RenameConstraintById(Oid conId, const char *newname)
{
Relation conDesc;
HeapTuple tuple;
Form_pg_constraint con;
conDesc = heap_open(ConstraintRelationId, RowExclusiveLock);
tuple = SearchSysCacheCopy1(CONSTROID, ObjectIdGetDatum(conId));
if (!HeapTupleIsValid(tuple))
elog(ERROR, "cache lookup failed for constraint %u", conId);
con = (Form_pg_constraint) GETSTRUCT(tuple);
/*
* We need to check whether the name is already in use --- note that there
* currently is not a unique index that would catch this.
*/
if (OidIsValid(con->conrelid) &&
ConstraintNameIsUsed(CONSTRAINT_RELATION,
con->conrelid,
con->connamespace,
newname))
ereport(ERROR,
(errcode(ERRCODE_DUPLICATE_OBJECT),
errmsg("constraint \"%s\" for relation \"%s\" already exists",
newname, get_rel_name(con->conrelid))));
if (OidIsValid(con->contypid) &&
ConstraintNameIsUsed(CONSTRAINT_DOMAIN,
con->contypid,
con->connamespace,
newname))
ereport(ERROR,
(errcode(ERRCODE_DUPLICATE_OBJECT),
errmsg("constraint \"%s\" for domain %s already exists",
newname, format_type_be(con->contypid))));
/* OK, do the rename --- tuple is a copy, so OK to scribble on it */
namestrcpy(&(con->conname), newname);
simple_heap_update(conDesc, &tuple->t_self, tuple);
/* update the system catalog indexes */
CatalogUpdateIndexes(conDesc, tuple);
InvokeObjectPostAlterHook(ConstraintRelationId, conId, 0);
heap_freetuple(tuple);
heap_close(conDesc, RowExclusiveLock);
}
/*
* Rename conversion
*/
Oid
RenameConversion(List *name, const char *newname)
{
Oid conversionOid;
Oid namespaceOid;
HeapTuple tup;
Relation rel;
AclResult aclresult;
rel = heap_open(ConversionRelationId, RowExclusiveLock);
conversionOid = get_conversion_oid(name, false);
tup = SearchSysCacheCopy1(CONVOID, ObjectIdGetDatum(conversionOid));
if (!HeapTupleIsValid(tup)) /* should not happen */
elog(ERROR, "cache lookup failed for conversion %u", conversionOid);
namespaceOid = ((Form_pg_conversion) GETSTRUCT(tup))->connamespace;
/* make sure the new name doesn't exist */
if (SearchSysCacheExists2(CONNAMENSP,
CStringGetDatum(newname),
ObjectIdGetDatum(namespaceOid)))
ereport(ERROR,
(errcode(ERRCODE_DUPLICATE_OBJECT),
errmsg("conversion \"%s\" already exists in schema \"%s\"",
newname, get_namespace_name(namespaceOid))));
/* must be owner */
if (!pg_conversion_ownercheck(conversionOid, GetUserId()))
aclcheck_error(ACLCHECK_NOT_OWNER, ACL_KIND_CONVERSION,
NameListToString(name));
/* must have CREATE privilege on namespace */
aclresult = pg_namespace_aclcheck(namespaceOid, GetUserId(), ACL_CREATE);
if (aclresult != ACLCHECK_OK)
aclcheck_error(aclresult, ACL_KIND_NAMESPACE,
get_namespace_name(namespaceOid));
/* rename */
namestrcpy(&(((Form_pg_conversion) GETSTRUCT(tup))->conname), newname);
simple_heap_update(rel, &tup->t_self, tup);
CatalogUpdateIndexes(rel, tup);
heap_close(rel, NoLock);
heap_freetuple(tup);
return conversionOid;
}
/**
* @brief Get the pg class tuple
* @param tuple relevant tuple if it exists, NULL otherwise
*/
HeapTuple Bridge::GetPGClassTupleForRelationOid(Oid relation_id) {
LOG_WARN("Do not use bridge function(%s) in Peloton !!! ", __func__);
Relation pg_class_rel;
HeapTuple tuple = NULL;
// Open pg_class table
pg_class_rel = heap_open(RelationRelationId, AccessShareLock);
// Search the pg_class table with given relation id
tuple = SearchSysCacheCopy1(RELOID, ObjectIdGetDatum(relation_id));
if (!HeapTupleIsValid(tuple)) {
elog(DEBUG2, "cache lookup failed for relation %u", relation_id);
// Don't break here, we need to close heap and commit.
}
heap_close(pg_class_rel, AccessShareLock);
return tuple;
}
/*
* update_default_partition_oid
*
* Update pg_partition_table.partdefid with a new default partition OID.
*/
void
update_default_partition_oid(Oid parentId, Oid defaultPartId)
{
HeapTuple tuple;
Relation pg_partitioned_table;
Form_pg_partitioned_table part_table_form;
pg_partitioned_table = table_open(PartitionedRelationId, RowExclusiveLock);
tuple = SearchSysCacheCopy1(PARTRELID, ObjectIdGetDatum(parentId));
if (!HeapTupleIsValid(tuple))
elog(ERROR, "cache lookup failed for partition key of relation %u",
parentId);
part_table_form = (Form_pg_partitioned_table) GETSTRUCT(tuple);
part_table_form->partdefid = defaultPartId;
CatalogTupleUpdate(pg_partitioned_table, &tuple->t_self, tuple);
heap_freetuple(tuple);
table_close(pg_partitioned_table, RowExclusiveLock);
}
/*
* OperatorUpd
*
* For a given operator, look up its negator and commutator operators.
* If they are defined, but their negator and commutator fields
* (respectively) are empty, then use the new operator for neg or comm.
* This solves a problem for users who need to insert two new operators
* which are the negator or commutator of each other.
*/
static void
OperatorUpd(Oid baseId, Oid commId, Oid negId)
{
int i;
Relation pg_operator_desc;
HeapTuple tup;
bool nulls[Natts_pg_operator];
bool replaces[Natts_pg_operator];
Datum values[Natts_pg_operator];
for (i = 0; i < Natts_pg_operator; ++i)
{
values[i] = (Datum) 0;
replaces[i] = false;
nulls[i] = false;
}
/*
* check and update the commutator & negator, if necessary
*
* We need a CommandCounterIncrement here in case of a self-commutator
* operator: we'll need to update the tuple that we just inserted.
*/
CommandCounterIncrement();
pg_operator_desc = heap_open(OperatorRelationId, RowExclusiveLock);
tup = SearchSysCacheCopy1(OPEROID, ObjectIdGetDatum(commId));
/*
* if the commutator and negator are the same operator, do one update. XXX
* this is probably useless code --- I doubt it ever makes sense for
* commutator and negator to be the same thing...
*/
if (commId == negId)
{
if (HeapTupleIsValid(tup))
{
Form_pg_operator t = (Form_pg_operator) GETSTRUCT(tup);
if (!OidIsValid(t->oprcom) || !OidIsValid(t->oprnegate))
{
if (!OidIsValid(t->oprnegate))
{
values[Anum_pg_operator_oprnegate - 1] = ObjectIdGetDatum(baseId);
replaces[Anum_pg_operator_oprnegate - 1] = true;
}
if (!OidIsValid(t->oprcom))
{
values[Anum_pg_operator_oprcom - 1] = ObjectIdGetDatum(baseId);
replaces[Anum_pg_operator_oprcom - 1] = true;
}
tup = heap_modify_tuple(tup,
RelationGetDescr(pg_operator_desc),
values,
nulls,
replaces);
simple_heap_update(pg_operator_desc, &tup->t_self, tup);
CatalogUpdateIndexes(pg_operator_desc, tup);
}
}
heap_close(pg_operator_desc, RowExclusiveLock);
return;
}
/* if commutator and negator are different, do two updates */
if (HeapTupleIsValid(tup) &&
!(OidIsValid(((Form_pg_operator) GETSTRUCT(tup))->oprcom)))
{
values[Anum_pg_operator_oprcom - 1] = ObjectIdGetDatum(baseId);
replaces[Anum_pg_operator_oprcom - 1] = true;
tup = heap_modify_tuple(tup,
RelationGetDescr(pg_operator_desc),
values,
nulls,
replaces);
simple_heap_update(pg_operator_desc, &tup->t_self, tup);
CatalogUpdateIndexes(pg_operator_desc, tup);
values[Anum_pg_operator_oprcom - 1] = (Datum) NULL;
replaces[Anum_pg_operator_oprcom - 1] = false;
}
/* check and update the negator, if necessary */
tup = SearchSysCacheCopy1(OPEROID, ObjectIdGetDatum(negId));
if (HeapTupleIsValid(tup) &&
!(OidIsValid(((Form_pg_operator) GETSTRUCT(tup))->oprnegate)))
{
values[Anum_pg_operator_oprnegate - 1] = ObjectIdGetDatum(baseId);
replaces[Anum_pg_operator_oprnegate - 1] = true;
tup = heap_modify_tuple(tup,
RelationGetDescr(pg_operator_desc),
values,
nulls,
replaces);
simple_heap_update(pg_operator_desc, &tup->t_self, tup);
CatalogUpdateIndexes(pg_operator_desc, tup);
}
heap_close(pg_operator_desc, RowExclusiveLock);
}
/*
* Delete a single constraint record.
*/
void
RemoveConstraintById(Oid conId)
{
Relation conDesc;
HeapTuple tup;
Form_pg_constraint con;
conDesc = heap_open(ConstraintRelationId, RowExclusiveLock);
tup = SearchSysCache1(CONSTROID, ObjectIdGetDatum(conId));
if (!HeapTupleIsValid(tup)) /* should not happen */
elog(ERROR, "cache lookup failed for constraint %u", conId);
con = (Form_pg_constraint) GETSTRUCT(tup);
/*
* Special processing depending on what the constraint is for.
*/
if (OidIsValid(con->conrelid))
{
Relation rel;
/*
* If the constraint is for a relation, open and exclusive-lock the
* relation it's for.
*/
rel = heap_open(con->conrelid, AccessExclusiveLock);
/*
* We need to update the relcheck count if it is a check constraint
* being dropped. This update will force backends to rebuild relcache
* entries when we commit.
*/
if (con->contype == CONSTRAINT_CHECK)
{
Relation pgrel;
HeapTuple relTup;
Form_pg_class classForm;
pgrel = heap_open(RelationRelationId, RowExclusiveLock);
relTup = SearchSysCacheCopy1(RELOID,
ObjectIdGetDatum(con->conrelid));
if (!HeapTupleIsValid(relTup))
elog(ERROR, "cache lookup failed for relation %u",
con->conrelid);
classForm = (Form_pg_class) GETSTRUCT(relTup);
if (classForm->relchecks == 0) /* should not happen */
elog(ERROR, "relation \"%s\" has relchecks = 0",
RelationGetRelationName(rel));
classForm->relchecks--;
simple_heap_update(pgrel, &relTup->t_self, relTup);
CatalogUpdateIndexes(pgrel, relTup);
heap_freetuple(relTup);
heap_close(pgrel, RowExclusiveLock);
}
/* Keep lock on constraint's rel until end of xact */
heap_close(rel, NoLock);
}
else if (OidIsValid(con->contypid))
{
/*
* XXX for now, do nothing special when dropping a domain constraint
*
* Probably there should be some form of locking on the domain type,
* but we have no such concept at the moment.
*/
}
else
elog(ERROR, "constraint %u is not of a known type", conId);
/* Fry the constraint itself */
simple_heap_delete(conDesc, &tup->t_self);
/* Clean up */
ReleaseSysCache(tup);
heap_close(conDesc, RowExclusiveLock);
}
/*
* OperatorUpd
*
* For a given operator, look up its negator and commutator operators.
* When isDelete is false, update their negator and commutator fields to
* point back to the given operator; when isDelete is true, update those
* fields to no longer point back to the given operator.
*
* The !isDelete case solves a problem for users who need to insert two new
* operators that are the negator or commutator of each other, while the
* isDelete case is needed so as not to leave dangling OID links behind
* after dropping an operator.
*/
void
OperatorUpd(Oid baseId, Oid commId, Oid negId, bool isDelete)
{
Relation pg_operator_desc;
HeapTuple tup;
/*
* If we're making an operator into its own commutator, then we need a
* command-counter increment here, since we've just inserted the tuple
* we're about to update. But when we're dropping an operator, we can
* skip this because we're at the beginning of the command.
*/
if (!isDelete)
CommandCounterIncrement();
/* Open the relation. */
pg_operator_desc = heap_open(OperatorRelationId, RowExclusiveLock);
/* Get a writable copy of the commutator's tuple. */
if (OidIsValid(commId))
tup = SearchSysCacheCopy1(OPEROID, ObjectIdGetDatum(commId));
else
tup = NULL;
/* Update the commutator's tuple if need be. */
if (HeapTupleIsValid(tup))
{
Form_pg_operator t = (Form_pg_operator) GETSTRUCT(tup);
bool update_commutator = false;
/*
* Out of due caution, we only change the commutator's oprcom field if
* it has the exact value we expected: InvalidOid when creating an
* operator, or baseId when dropping one.
*/
if (isDelete && t->oprcom == baseId)
{
t->oprcom = InvalidOid;
update_commutator = true;
}
else if (!isDelete && !OidIsValid(t->oprcom))
{
t->oprcom = baseId;
update_commutator = true;
}
/* If any columns were found to need modification, update tuple. */
if (update_commutator)
{
CatalogTupleUpdate(pg_operator_desc, &tup->t_self, tup);
/*
* Do CCI to make the updated tuple visible. We must do this in
* case the commutator is also the negator. (Which would be a
* logic error on the operator definer's part, but that's not a
* good reason to fail here.) We would need a CCI anyway in the
* deletion case for a self-commutator with no negator.
*/
CommandCounterIncrement();
}
}
/*
* Similarly find and update the negator, if any.
*/
if (OidIsValid(negId))
tup = SearchSysCacheCopy1(OPEROID, ObjectIdGetDatum(negId));
else
tup = NULL;
if (HeapTupleIsValid(tup))
{
Form_pg_operator t = (Form_pg_operator) GETSTRUCT(tup);
bool update_negator = false;
/*
* Out of due caution, we only change the negator's oprnegate field if
* it has the exact value we expected: InvalidOid when creating an
* operator, or baseId when dropping one.
*/
if (isDelete && t->oprnegate == baseId)
{
t->oprnegate = InvalidOid;
update_negator = true;
}
else if (!isDelete && !OidIsValid(t->oprnegate))
{
t->oprnegate = baseId;
update_negator = true;
}
/* If any columns were found to need modification, update tuple. */
if (update_negator)
{
CatalogTupleUpdate(pg_operator_desc, &tup->t_self, tup);
/*
* In the deletion case, do CCI to make the updated tuple visible.
* We must do this in case the operator is its own negator. (Which
* would be a logic error on the operator definer's part, but
* that's not a good reason to fail here.)
*/
if (isDelete)
CommandCounterIncrement();
}
}
/* Close relation and release catalog lock. */
heap_close(pg_operator_desc, RowExclusiveLock);
}
/*
* OperatorCreate
*
* "X" indicates an optional argument (i.e. one that can be NULL or 0)
* operatorName name for new operator
* operatorNamespace namespace for new operator
* leftTypeId X left type ID
* rightTypeId X right type ID
* procedureId procedure ID for operator
* commutatorName X commutator operator
* negatorName X negator operator
* restrictionId X restriction selectivity procedure ID
* joinId X join selectivity procedure ID
* canMerge merge join can be used with this operator
* canHash hash join can be used with this operator
*
* The caller should have validated properties and permissions for the
* objects passed as OID references. We must handle the commutator and
* negator operator references specially, however, since those need not
* exist beforehand.
*
* This routine gets complicated because it allows the user to
* specify operators that do not exist. For example, if operator
* "op" is being defined, the negator operator "negop" and the
* commutator "commop" can also be defined without specifying
* any information other than their names. Since in order to
* add "op" to the PG_OPERATOR catalog, all the Oid's for these
* operators must be placed in the fields of "op", a forward
* declaration is done on the commutator and negator operators.
* This is called creating a shell, and its main effect is to
* create a tuple in the PG_OPERATOR catalog with minimal
* information about the operator (just its name and types).
* Forward declaration is used only for this purpose, it is
* not available to the user as it is for type definition.
*/
ObjectAddress
OperatorCreate(const char *operatorName,
Oid operatorNamespace,
Oid leftTypeId,
Oid rightTypeId,
Oid procedureId,
List *commutatorName,
List *negatorName,
Oid restrictionId,
Oid joinId,
bool canMerge,
bool canHash)
{
Relation pg_operator_desc;
HeapTuple tup;
bool isUpdate;
bool nulls[Natts_pg_operator];
bool replaces[Natts_pg_operator];
Datum values[Natts_pg_operator];
Oid operatorObjectId;
bool operatorAlreadyDefined;
Oid operResultType;
Oid commutatorId,
negatorId;
bool selfCommutator = false;
NameData oname;
int i;
ObjectAddress address;
/*
* Sanity checks
*/
if (!validOperatorName(operatorName))
ereport(ERROR,
(errcode(ERRCODE_INVALID_NAME),
errmsg("\"%s\" is not a valid operator name",
operatorName)));
if (!(OidIsValid(leftTypeId) && OidIsValid(rightTypeId)))
{
/* If it's not a binary op, these things mustn't be set: */
if (commutatorName)
ereport(ERROR,
(errcode(ERRCODE_INVALID_FUNCTION_DEFINITION),
errmsg("only binary operators can have commutators")));
if (OidIsValid(joinId))
ereport(ERROR,
(errcode(ERRCODE_INVALID_FUNCTION_DEFINITION),
errmsg("only binary operators can have join selectivity")));
if (canMerge)
ereport(ERROR,
(errcode(ERRCODE_INVALID_FUNCTION_DEFINITION),
errmsg("only binary operators can merge join")));
if (canHash)
ereport(ERROR,
(errcode(ERRCODE_INVALID_FUNCTION_DEFINITION),
errmsg("only binary operators can hash")));
}
operResultType = get_func_rettype(procedureId);
if (operResultType != BOOLOID)
{
/* If it's not a boolean op, these things mustn't be set: */
if (negatorName)
ereport(ERROR,
(errcode(ERRCODE_INVALID_FUNCTION_DEFINITION),
errmsg("only boolean operators can have negators")));
if (OidIsValid(restrictionId))
ereport(ERROR,
(errcode(ERRCODE_INVALID_FUNCTION_DEFINITION),
errmsg("only boolean operators can have restriction selectivity")));
if (OidIsValid(joinId))
ereport(ERROR,
(errcode(ERRCODE_INVALID_FUNCTION_DEFINITION),
errmsg("only boolean operators can have join selectivity")));
if (canMerge)
ereport(ERROR,
(errcode(ERRCODE_INVALID_FUNCTION_DEFINITION),
errmsg("only boolean operators can merge join")));
if (canHash)
ereport(ERROR,
(errcode(ERRCODE_INVALID_FUNCTION_DEFINITION),
errmsg("only boolean operators can hash")));
}
operatorObjectId = OperatorGet(operatorName,
operatorNamespace,
leftTypeId,
rightTypeId,
&operatorAlreadyDefined);
if (operatorAlreadyDefined)
ereport(ERROR,
(errcode(ERRCODE_DUPLICATE_FUNCTION),
errmsg("operator %s already exists",
operatorName)));
/*
* At this point, if operatorObjectId is not InvalidOid then we are
* filling in a previously-created shell. Insist that the user own any
* such shell.
*/
if (OidIsValid(operatorObjectId) &&
!pg_oper_ownercheck(operatorObjectId, GetUserId()))
aclcheck_error(ACLCHECK_NOT_OWNER, ACL_KIND_OPER,
operatorName);
/*
* Set up the other operators. If they do not currently exist, create
* shells in order to get ObjectId's.
*/
if (commutatorName)
{
/* commutator has reversed arg types */
commutatorId = get_other_operator(commutatorName,
rightTypeId, leftTypeId,
operatorName, operatorNamespace,
leftTypeId, rightTypeId,
true);
/* Permission check: must own other operator */
if (OidIsValid(commutatorId) &&
!pg_oper_ownercheck(commutatorId, GetUserId()))
aclcheck_error(ACLCHECK_NOT_OWNER, ACL_KIND_OPER,
NameListToString(commutatorName));
/*
* self-linkage to this operator; will fix below. Note that only
* self-linkage for commutation makes sense.
*/
if (!OidIsValid(commutatorId))
selfCommutator = true;
}
else
commutatorId = InvalidOid;
if (negatorName)
{
/* negator has same arg types */
negatorId = get_other_operator(negatorName,
leftTypeId, rightTypeId,
operatorName, operatorNamespace,
leftTypeId, rightTypeId,
false);
/* Permission check: must own other operator */
if (OidIsValid(negatorId) &&
!pg_oper_ownercheck(negatorId, GetUserId()))
aclcheck_error(ACLCHECK_NOT_OWNER, ACL_KIND_OPER,
NameListToString(negatorName));
}
else
negatorId = InvalidOid;
/*
* set up values in the operator tuple
*/
for (i = 0; i < Natts_pg_operator; ++i)
{
values[i] = (Datum) NULL;
replaces[i] = true;
nulls[i] = false;
}
namestrcpy(&oname, operatorName);
values[Anum_pg_operator_oprname - 1] = NameGetDatum(&oname);
values[Anum_pg_operator_oprnamespace - 1] = ObjectIdGetDatum(operatorNamespace);
values[Anum_pg_operator_oprowner - 1] = ObjectIdGetDatum(GetUserId());
values[Anum_pg_operator_oprkind - 1] = CharGetDatum(leftTypeId ? (rightTypeId ? 'b' : 'r') : 'l');
values[Anum_pg_operator_oprcanmerge - 1] = BoolGetDatum(canMerge);
values[Anum_pg_operator_oprcanhash - 1] = BoolGetDatum(canHash);
values[Anum_pg_operator_oprleft - 1] = ObjectIdGetDatum(leftTypeId);
values[Anum_pg_operator_oprright - 1] = ObjectIdGetDatum(rightTypeId);
values[Anum_pg_operator_oprresult - 1] = ObjectIdGetDatum(operResultType);
values[Anum_pg_operator_oprcom - 1] = ObjectIdGetDatum(commutatorId);
values[Anum_pg_operator_oprnegate - 1] = ObjectIdGetDatum(negatorId);
values[Anum_pg_operator_oprcode - 1] = ObjectIdGetDatum(procedureId);
values[Anum_pg_operator_oprrest - 1] = ObjectIdGetDatum(restrictionId);
values[Anum_pg_operator_oprjoin - 1] = ObjectIdGetDatum(joinId);
pg_operator_desc = heap_open(OperatorRelationId, RowExclusiveLock);
/*
* If we are replacing an operator shell, update; else insert
*/
if (operatorObjectId)
{
isUpdate = true;
tup = SearchSysCacheCopy1(OPEROID,
ObjectIdGetDatum(operatorObjectId));
if (!HeapTupleIsValid(tup))
elog(ERROR, "cache lookup failed for operator %u",
operatorObjectId);
tup = heap_modify_tuple(tup,
RelationGetDescr(pg_operator_desc),
values,
nulls,
replaces);
CatalogTupleUpdate(pg_operator_desc, &tup->t_self, tup);
}
else
{
isUpdate = false;
tup = heap_form_tuple(RelationGetDescr(pg_operator_desc),
values, nulls);
operatorObjectId = CatalogTupleInsert(pg_operator_desc, tup);
}
/* Add dependencies for the entry */
address = makeOperatorDependencies(tup, isUpdate);
/* Post creation hook for new operator */
InvokeObjectPostCreateHook(OperatorRelationId, operatorObjectId, 0);
heap_close(pg_operator_desc, RowExclusiveLock);
/*
* If a commutator and/or negator link is provided, update the other
* operator(s) to point at this one, if they don't already have a link.
* This supports an alternative style of operator definition wherein the
* user first defines one operator without giving negator or commutator,
* then defines the other operator of the pair with the proper commutator
* or negator attribute. That style doesn't require creation of a shell,
* and it's the only style that worked right before Postgres version 6.5.
* This code also takes care of the situation where the new operator is
* its own commutator.
*/
if (selfCommutator)
commutatorId = operatorObjectId;
if (OidIsValid(commutatorId) || OidIsValid(negatorId))
OperatorUpd(operatorObjectId, commutatorId, negatorId, false);
return address;
}
/*
* create_toast_table --- internal workhorse
*
* rel is already opened and locked
* toastOid and toastIndexOid are normally InvalidOid, but during
* bootstrap they can be nonzero to specify hand-assigned OIDs
*/
static bool
create_toast_table(Relation rel, Oid toastOid, Oid toastIndexOid,
Datum reloptions, LOCKMODE lockmode, bool check)
{
Oid relOid = RelationGetRelid(rel);
HeapTuple reltup;
TupleDesc tupdesc;
bool shared_relation;
bool mapped_relation;
Relation toast_rel;
Relation class_rel;
Oid toast_relid;
Oid toast_typid = InvalidOid;
Oid namespaceid;
char toast_relname[NAMEDATALEN];
char toast_idxname[NAMEDATALEN];
IndexInfo *indexInfo;
Oid collationObjectId[2];
Oid classObjectId[2];
int16 coloptions[2];
ObjectAddress baseobject,
toastobject;
/*
* Toast table is shared if and only if its parent is.
*
* We cannot allow toasting a shared relation after initdb (because
* there's no way to mark it toasted in other databases' pg_class).
*/
shared_relation = rel->rd_rel->relisshared;
if (shared_relation && !IsBootstrapProcessingMode())
ereport(ERROR,
(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
errmsg("shared tables cannot be toasted after initdb")));
/* It's mapped if and only if its parent is, too */
mapped_relation = RelationIsMapped(rel);
/*
* Is it already toasted?
*/
if (rel->rd_rel->reltoastrelid != InvalidOid)
return false;
/*
* Check to see whether the table actually needs a TOAST table.
*/
if (!IsBinaryUpgrade)
{
/* Normal mode, normal check */
if (!needs_toast_table(rel))
return false;
}
else
{
/*
* In binary-upgrade mode, create a TOAST table if and only if
* pg_upgrade told us to (ie, a TOAST table OID has been provided).
*
* This indicates that the old cluster had a TOAST table for the
* current table. We must create a TOAST table to receive the old
* TOAST file, even if the table seems not to need one.
*
* Contrariwise, if the old cluster did not have a TOAST table, we
* should be able to get along without one even if the new version's
* needs_toast_table rules suggest we should have one. There is a lot
* of daylight between where we will create a TOAST table and where
* one is really necessary to avoid failures, so small cross-version
* differences in the when-to-create heuristic shouldn't be a problem.
* If we tried to create a TOAST table anyway, we would have the
* problem that it might take up an OID that will conflict with some
* old-cluster table we haven't seen yet.
*/
if (!OidIsValid(binary_upgrade_next_toast_pg_class_oid) ||
!OidIsValid(binary_upgrade_next_toast_pg_type_oid))
return false;
}
/*
* If requested check lockmode is sufficient. This is a cross check in
* case of errors or conflicting decisions in earlier code.
*/
if (check && lockmode != AccessExclusiveLock)
elog(ERROR, "AccessExclusiveLock required to add toast table.");
/*
* Create the toast table and its index
*/
snprintf(toast_relname, sizeof(toast_relname),
"pg_toast_%u", relOid);
snprintf(toast_idxname, sizeof(toast_idxname),
"pg_toast_%u_index", relOid);
/* this is pretty painful... need a tuple descriptor */
tupdesc = CreateTemplateTupleDesc(3);
TupleDescInitEntry(tupdesc, (AttrNumber) 1,
"chunk_id",
OIDOID,
-1, 0);
TupleDescInitEntry(tupdesc, (AttrNumber) 2,
"chunk_seq",
INT4OID,
-1, 0);
TupleDescInitEntry(tupdesc, (AttrNumber) 3,
"chunk_data",
BYTEAOID,
-1, 0);
/*
* Ensure that the toast table doesn't itself get toasted, or we'll be
* toast :-(. This is essential for chunk_data because type bytea is
* toastable; hit the other two just to be sure.
*/
TupleDescAttr(tupdesc, 0)->attstorage = 'p';
TupleDescAttr(tupdesc, 1)->attstorage = 'p';
TupleDescAttr(tupdesc, 2)->attstorage = 'p';
/*
* Toast tables for regular relations go in pg_toast; those for temp
* relations go into the per-backend temp-toast-table namespace.
*/
if (isTempOrTempToastNamespace(rel->rd_rel->relnamespace))
namespaceid = GetTempToastNamespace();
else
namespaceid = PG_TOAST_NAMESPACE;
/*
* Use binary-upgrade override for pg_type.oid, if supplied. We might be
* in the post-schema-restore phase where we are doing ALTER TABLE to
* create TOAST tables that didn't exist in the old cluster.
*/
if (IsBinaryUpgrade && OidIsValid(binary_upgrade_next_toast_pg_type_oid))
{
toast_typid = binary_upgrade_next_toast_pg_type_oid;
binary_upgrade_next_toast_pg_type_oid = InvalidOid;
}
toast_relid = heap_create_with_catalog(toast_relname,
namespaceid,
rel->rd_rel->reltablespace,
toastOid,
toast_typid,
InvalidOid,
rel->rd_rel->relowner,
tupdesc,
NIL,
RELKIND_TOASTVALUE,
rel->rd_rel->relpersistence,
shared_relation,
mapped_relation,
ONCOMMIT_NOOP,
reloptions,
false,
true,
true,
InvalidOid,
NULL);
Assert(toast_relid != InvalidOid);
/* make the toast relation visible, else heap_open will fail */
CommandCounterIncrement();
/* ShareLock is not really needed here, but take it anyway */
toast_rel = heap_open(toast_relid, ShareLock);
/*
* Create unique index on chunk_id, chunk_seq.
*
* NOTE: the normal TOAST access routines could actually function with a
* single-column index on chunk_id only. However, the slice access
* routines use both columns for faster access to an individual chunk. In
* addition, we want it to be unique as a check against the possibility of
* duplicate TOAST chunk OIDs. The index might also be a little more
* efficient this way, since btree isn't all that happy with large numbers
* of equal keys.
*/
indexInfo = makeNode(IndexInfo);
indexInfo->ii_NumIndexAttrs = 2;
indexInfo->ii_NumIndexKeyAttrs = 2;
indexInfo->ii_IndexAttrNumbers[0] = 1;
indexInfo->ii_IndexAttrNumbers[1] = 2;
indexInfo->ii_Expressions = NIL;
indexInfo->ii_ExpressionsState = NIL;
indexInfo->ii_Predicate = NIL;
indexInfo->ii_PredicateState = NULL;
indexInfo->ii_ExclusionOps = NULL;
indexInfo->ii_ExclusionProcs = NULL;
indexInfo->ii_ExclusionStrats = NULL;
indexInfo->ii_Unique = true;
indexInfo->ii_ReadyForInserts = true;
indexInfo->ii_Concurrent = false;
indexInfo->ii_BrokenHotChain = false;
indexInfo->ii_ParallelWorkers = 0;
indexInfo->ii_Am = BTREE_AM_OID;
indexInfo->ii_AmCache = NULL;
indexInfo->ii_Context = CurrentMemoryContext;
collationObjectId[0] = InvalidOid;
collationObjectId[1] = InvalidOid;
classObjectId[0] = OID_BTREE_OPS_OID;
classObjectId[1] = INT4_BTREE_OPS_OID;
coloptions[0] = 0;
coloptions[1] = 0;
index_create(toast_rel, toast_idxname, toastIndexOid, InvalidOid,
InvalidOid, InvalidOid,
indexInfo,
list_make2("chunk_id", "chunk_seq"),
BTREE_AM_OID,
rel->rd_rel->reltablespace,
collationObjectId, classObjectId, coloptions, (Datum) 0,
INDEX_CREATE_IS_PRIMARY, 0, true, true, NULL);
heap_close(toast_rel, NoLock);
/*
* Store the toast table's OID in the parent relation's pg_class row
*/
class_rel = heap_open(RelationRelationId, RowExclusiveLock);
reltup = SearchSysCacheCopy1(RELOID, ObjectIdGetDatum(relOid));
if (!HeapTupleIsValid(reltup))
elog(ERROR, "cache lookup failed for relation %u", relOid);
((Form_pg_class) GETSTRUCT(reltup))->reltoastrelid = toast_relid;
if (!IsBootstrapProcessingMode())
{
/* normal case, use a transactional update */
CatalogTupleUpdate(class_rel, &reltup->t_self, reltup);
}
else
{
/* While bootstrapping, we cannot UPDATE, so overwrite in-place */
heap_inplace_update(class_rel, reltup);
}
heap_freetuple(reltup);
heap_close(class_rel, RowExclusiveLock);
/*
* Register dependency from the toast table to the master, so that the
* toast table will be deleted if the master is. Skip this in bootstrap
* mode.
*/
if (!IsBootstrapProcessingMode())
{
baseobject.classId = RelationRelationId;
baseobject.objectId = relOid;
baseobject.objectSubId = 0;
toastobject.classId = RelationRelationId;
toastobject.objectId = toast_relid;
toastobject.objectSubId = 0;
recordDependencyOn(&toastobject, &baseobject, DEPENDENCY_INTERNAL);
}
/*
* Make changes visible
*/
CommandCounterIncrement();
return true;
}
/*
* PgxcClassAlter
* Modify a pgxc_class entry with given data
*/
void
PgxcClassAlter(Oid pcrelid,
char pclocatortype,
int pcattnum,
int pchashalgorithm,
int pchashbuckets,
int numnodes,
Oid *nodes,
PgxcClassAlterType type)
{
Relation rel;
HeapTuple oldtup, newtup;
oidvector *nodes_array;
Datum new_record[Natts_pgxc_class];
bool new_record_nulls[Natts_pgxc_class];
bool new_record_repl[Natts_pgxc_class];
Assert(OidIsValid(pcrelid));
rel = heap_open(PgxcClassRelationId, RowExclusiveLock);
oldtup = SearchSysCacheCopy1(PGXCCLASSRELID,
ObjectIdGetDatum(pcrelid));
if (!HeapTupleIsValid(oldtup)) /* should not happen */
elog(ERROR, "cache lookup failed for pgxc_class %u", pcrelid);
/* Build array of Oids to be inserted */
nodes_array = buildoidvector(nodes, numnodes);
/* Initialize fields */
MemSet(new_record, 0, sizeof(new_record));
MemSet(new_record_nulls, false, sizeof(new_record_nulls));
MemSet(new_record_repl, false, sizeof(new_record_repl));
/* Fields are updated depending on operation type */
switch (type)
{
case PGXC_CLASS_ALTER_DISTRIBUTION:
new_record_repl[Anum_pgxc_class_pclocatortype - 1] = true;
new_record_repl[Anum_pgxc_class_pcattnum - 1] = true;
new_record_repl[Anum_pgxc_class_pchashalgorithm - 1] = true;
new_record_repl[Anum_pgxc_class_pchashbuckets - 1] = true;
break;
case PGXC_CLASS_ALTER_NODES:
new_record_repl[Anum_pgxc_class_nodes - 1] = true;
break;
case PGXC_CLASS_ALTER_ALL:
default:
new_record_repl[Anum_pgxc_class_pcrelid - 1] = true;
new_record_repl[Anum_pgxc_class_pclocatortype - 1] = true;
new_record_repl[Anum_pgxc_class_pcattnum - 1] = true;
new_record_repl[Anum_pgxc_class_pchashalgorithm - 1] = true;
new_record_repl[Anum_pgxc_class_pchashbuckets - 1] = true;
new_record_repl[Anum_pgxc_class_nodes - 1] = true;
}
/* Set up new fields */
/* Relation Oid */
if (new_record_repl[Anum_pgxc_class_pcrelid - 1])
new_record[Anum_pgxc_class_pcrelid - 1] = ObjectIdGetDatum(pcrelid);
/* Locator type */
if (new_record_repl[Anum_pgxc_class_pclocatortype - 1])
new_record[Anum_pgxc_class_pclocatortype - 1] = CharGetDatum(pclocatortype);
/* Attribute number of distribution column */
if (new_record_repl[Anum_pgxc_class_pcattnum - 1])
new_record[Anum_pgxc_class_pcattnum - 1] = UInt16GetDatum(pcattnum);
/* Hash algorithm type */
if (new_record_repl[Anum_pgxc_class_pchashalgorithm - 1])
new_record[Anum_pgxc_class_pchashalgorithm - 1] = UInt16GetDatum(pchashalgorithm);
/* Hash buckets */
if (new_record_repl[Anum_pgxc_class_pchashbuckets - 1])
new_record[Anum_pgxc_class_pchashbuckets - 1] = UInt16GetDatum(pchashbuckets);
/* Node information */
if (new_record_repl[Anum_pgxc_class_nodes - 1])
new_record[Anum_pgxc_class_nodes - 1] = PointerGetDatum(nodes_array);
/* Update relation */
newtup = heap_modify_tuple(oldtup, RelationGetDescr(rel),
new_record,
new_record_nulls, new_record_repl);
simple_heap_update(rel, &oldtup->t_self, newtup);
CatalogUpdateIndexes(rel, newtup);
heap_close(rel, RowExclusiveLock);
}
/*
* AlterSequence
*
* Modify the definition of a sequence relation
*/
ObjectAddress
AlterSequence(ParseState *pstate, AlterSeqStmt *stmt)
{
Oid relid;
SeqTable elm;
Relation seqrel;
Buffer buf;
HeapTupleData seqdatatuple;
Form_pg_sequence seqform;
Form_pg_sequence_data seqdata;
FormData_pg_sequence_data newseqdata;
List *owned_by;
ObjectAddress address;
Relation rel;
HeapTuple tuple;
/* Open and lock sequence. */
relid = RangeVarGetRelid(stmt->sequence, AccessShareLock, stmt->missing_ok);
if (relid == InvalidOid)
{
ereport(NOTICE,
(errmsg("relation \"%s\" does not exist, skipping",
stmt->sequence->relname)));
return InvalidObjectAddress;
}
init_sequence(relid, &elm, &seqrel);
/* allow ALTER to sequence owner only */
if (!pg_class_ownercheck(relid, GetUserId()))
aclcheck_error(ACLCHECK_NOT_OWNER, ACL_KIND_CLASS,
stmt->sequence->relname);
/* lock page' buffer and read tuple into new sequence structure */
seqdata = read_seq_tuple(seqrel, &buf, &seqdatatuple);
/* Copy old values of options into workspace */
memcpy(&newseqdata, seqdata, sizeof(FormData_pg_sequence_data));
rel = heap_open(SequenceRelationId, RowExclusiveLock);
tuple = SearchSysCacheCopy1(SEQRELID,
ObjectIdGetDatum(relid));
if (!HeapTupleIsValid(tuple))
elog(ERROR, "cache lookup failed for sequence %u",
relid);
seqform = (Form_pg_sequence) GETSTRUCT(tuple);
/* Check and set new values */
init_params(pstate, stmt->options, false, seqform, &newseqdata, &owned_by);
/* Clear local cache so that we don't think we have cached numbers */
/* Note that we do not change the currval() state */
elm->cached = elm->last;
/* check the comment above nextval_internal()'s equivalent call. */
if (RelationNeedsWAL(seqrel))
GetTopTransactionId();
/* Now okay to update the on-disk tuple */
START_CRIT_SECTION();
memcpy(seqdata, &newseqdata, sizeof(FormData_pg_sequence_data));
MarkBufferDirty(buf);
/* XLOG stuff */
if (RelationNeedsWAL(seqrel))
{
xl_seq_rec xlrec;
XLogRecPtr recptr;
Page page = BufferGetPage(buf);
XLogBeginInsert();
XLogRegisterBuffer(0, buf, REGBUF_WILL_INIT);
xlrec.node = seqrel->rd_node;
XLogRegisterData((char *) &xlrec, sizeof(xl_seq_rec));
XLogRegisterData((char *) seqdatatuple.t_data, seqdatatuple.t_len);
recptr = XLogInsert(RM_SEQ_ID, XLOG_SEQ_LOG);
PageSetLSN(page, recptr);
}
END_CRIT_SECTION();
UnlockReleaseBuffer(buf);
/* process OWNED BY if given */
if (owned_by)
process_owned_by(seqrel, owned_by);
InvokeObjectPostAlterHook(RelationRelationId, relid, 0);
ObjectAddressSet(address, RelationRelationId, relid);
relation_close(seqrel, NoLock);
simple_heap_update(rel, &tuple->t_self, tuple);
CatalogUpdateIndexes(rel, tuple);
heap_close(rel, RowExclusiveLock);
return address;
}
/*
* create_toast_table --- internal workhorse
*
* rel is already opened and locked
* toastOid and toastIndexOid are normally InvalidOid, but during
* bootstrap they can be nonzero to specify hand-assigned OIDs
*/
static bool
create_toast_table(Relation rel, Oid toastOid, Oid toastIndexOid,
Datum reloptions, LOCKMODE lockmode, bool check)
{
Oid relOid = RelationGetRelid(rel);
HeapTuple reltup;
TupleDesc tupdesc;
bool shared_relation;
bool mapped_relation;
Relation toast_rel;
Relation class_rel;
Oid toast_relid;
Oid toast_typid = InvalidOid;
Oid namespaceid;
char toast_relname[NAMEDATALEN];
char toast_idxname[NAMEDATALEN];
IndexInfo *indexInfo;
Oid collationObjectId[2];
Oid classObjectId[2];
int16 coloptions[2];
ObjectAddress baseobject,
toastobject;
/*
* Toast table is shared if and only if its parent is.
*
* We cannot allow toasting a shared relation after initdb (because
* there's no way to mark it toasted in other databases' pg_class).
*/
shared_relation = rel->rd_rel->relisshared;
if (shared_relation && !IsBootstrapProcessingMode())
ereport(ERROR,
(errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
errmsg("shared tables cannot be toasted after initdb")));
/* It's mapped if and only if its parent is, too */
mapped_relation = RelationIsMapped(rel);
/*
* Is it already toasted?
*/
if (rel->rd_rel->reltoastrelid != InvalidOid)
return false;
if (!IsBinaryUpgrade)
{
if (!needs_toast_table(rel))
return false;
}
else
{
/*
* Check to see whether the table needs a TOAST table.
*
* If an update-in-place TOAST relfilenode is specified, force TOAST file
* creation even if it seems not to need one. This handles the case
* where the old cluster needed a TOAST table but the new cluster
* would not normally create one.
*/
/*
* If a TOAST oid is not specified, skip TOAST creation as we will do
* it later so we don't create a TOAST table whose OID later conflicts
* with a user-supplied OID. This handles cases where the old cluster
* didn't need a TOAST table, but the new cluster does.
*/
if (!OidIsValid(binary_upgrade_next_toast_pg_class_oid))
return false;
/*
* If a special TOAST value has been passed in, it means we are in
* cleanup mode --- we are creating needed TOAST tables after all user
* tables with specified OIDs have been created. We let the system
* assign a TOAST oid for us. The tables are empty so the missing
* TOAST tables were not a problem.
*/
if (binary_upgrade_next_toast_pg_class_oid == OPTIONALLY_CREATE_TOAST_OID)
{
/* clear as it is not to be used; it is just a flag */
binary_upgrade_next_toast_pg_class_oid = InvalidOid;
if (!needs_toast_table(rel))
return false;
}
/* both should be set, or not set */
Assert(OidIsValid(binary_upgrade_next_toast_pg_class_oid) ==
OidIsValid(binary_upgrade_next_toast_pg_type_oid));
}
/*
* If requested check lockmode is sufficient. This is a cross check in
* case of errors or conflicting decisions in earlier code.
*/
if (check && lockmode != AccessExclusiveLock)
elog(ERROR, "AccessExclusiveLock required to add toast table.");
/*
* Create the toast table and its index
*/
snprintf(toast_relname, sizeof(toast_relname),
"pg_toast_%u", relOid);
snprintf(toast_idxname, sizeof(toast_idxname),
"pg_toast_%u_index", relOid);
/* this is pretty painful... need a tuple descriptor */
tupdesc = CreateTemplateTupleDesc(3, false);
TupleDescInitEntry(tupdesc, (AttrNumber) 1,
"chunk_id",
OIDOID,
-1, 0);
TupleDescInitEntry(tupdesc, (AttrNumber) 2,
"chunk_seq",
INT4OID,
-1, 0);
TupleDescInitEntry(tupdesc, (AttrNumber) 3,
"chunk_data",
BYTEAOID,
-1, 0);
/*
* Ensure that the toast table doesn't itself get toasted, or we'll be
* toast :-(. This is essential for chunk_data because type bytea is
* toastable; hit the other two just to be sure.
*/
tupdesc->attrs[0]->attstorage = 'p';
tupdesc->attrs[1]->attstorage = 'p';
tupdesc->attrs[2]->attstorage = 'p';
/*
* Toast tables for regular relations go in pg_toast; those for temp
* relations go into the per-backend temp-toast-table namespace.
*/
if (isTempOrToastNamespace(rel->rd_rel->relnamespace))
namespaceid = GetTempToastNamespace();
else
namespaceid = PG_TOAST_NAMESPACE;
/* Use binary-upgrade override for pg_type.oid, if supplied. */
if (IsBinaryUpgrade && OidIsValid(binary_upgrade_next_toast_pg_type_oid))
{
toast_typid = binary_upgrade_next_toast_pg_type_oid;
binary_upgrade_next_toast_pg_type_oid = InvalidOid;
}
toast_relid = heap_create_with_catalog(toast_relname,
namespaceid,
rel->rd_rel->reltablespace,
toastOid,
toast_typid,
InvalidOid,
rel->rd_rel->relowner,
tupdesc,
NIL,
RELKIND_TOASTVALUE,
rel->rd_rel->relpersistence,
shared_relation,
mapped_relation,
true,
0,
ONCOMMIT_NOOP,
reloptions,
false,
true,
true);
Assert(toast_relid != InvalidOid);
/* make the toast relation visible, else heap_open will fail */
CommandCounterIncrement();
/* ShareLock is not really needed here, but take it anyway */
toast_rel = heap_open(toast_relid, ShareLock);
/*
* Create unique index on chunk_id, chunk_seq.
*
* NOTE: the normal TOAST access routines could actually function with a
* single-column index on chunk_id only. However, the slice access
* routines use both columns for faster access to an individual chunk. In
* addition, we want it to be unique as a check against the possibility of
* duplicate TOAST chunk OIDs. The index might also be a little more
* efficient this way, since btree isn't all that happy with large numbers
* of equal keys.
*/
indexInfo = makeNode(IndexInfo);
indexInfo->ii_NumIndexAttrs = 2;
indexInfo->ii_KeyAttrNumbers[0] = 1;
indexInfo->ii_KeyAttrNumbers[1] = 2;
indexInfo->ii_Expressions = NIL;
indexInfo->ii_ExpressionsState = NIL;
indexInfo->ii_Predicate = NIL;
indexInfo->ii_PredicateState = NIL;
indexInfo->ii_ExclusionOps = NULL;
indexInfo->ii_ExclusionProcs = NULL;
indexInfo->ii_ExclusionStrats = NULL;
indexInfo->ii_Unique = true;
indexInfo->ii_ReadyForInserts = true;
indexInfo->ii_Concurrent = false;
indexInfo->ii_BrokenHotChain = false;
collationObjectId[0] = InvalidOid;
collationObjectId[1] = InvalidOid;
classObjectId[0] = OID_BTREE_OPS_OID;
classObjectId[1] = INT4_BTREE_OPS_OID;
coloptions[0] = 0;
coloptions[1] = 0;
index_create(toast_rel, toast_idxname, toastIndexOid, InvalidOid,
indexInfo,
list_make2("chunk_id", "chunk_seq"),
BTREE_AM_OID,
rel->rd_rel->reltablespace,
collationObjectId, classObjectId, coloptions, (Datum) 0,
true, false, false, false,
true, false, false, true);
heap_close(toast_rel, NoLock);
/*
* Store the toast table's OID in the parent relation's pg_class row
*/
class_rel = heap_open(RelationRelationId, RowExclusiveLock);
reltup = SearchSysCacheCopy1(RELOID, ObjectIdGetDatum(relOid));
if (!HeapTupleIsValid(reltup))
elog(ERROR, "cache lookup failed for relation %u", relOid);
((Form_pg_class) GETSTRUCT(reltup))->reltoastrelid = toast_relid;
if (!IsBootstrapProcessingMode())
{
/* normal case, use a transactional update */
simple_heap_update(class_rel, &reltup->t_self, reltup);
/* Keep catalog indexes current */
CatalogUpdateIndexes(class_rel, reltup);
}
else
{
/* While bootstrapping, we cannot UPDATE, so overwrite in-place */
heap_inplace_update(class_rel, reltup);
}
heap_freetuple(reltup);
heap_close(class_rel, RowExclusiveLock);
/*
* Register dependency from the toast table to the master, so that the
* toast table will be deleted if the master is. Skip this in bootstrap
* mode.
*/
if (!IsBootstrapProcessingMode())
{
baseobject.classId = RelationRelationId;
baseobject.objectId = relOid;
baseobject.objectSubId = 0;
toastobject.classId = RelationRelationId;
toastobject.objectId = toast_relid;
toastobject.objectSubId = 0;
recordDependencyOn(&toastobject, &baseobject, DEPENDENCY_INTERNAL);
}
/*
* Make changes visible
*/
CommandCounterIncrement();
return true;
}
/*
* RenameTypeInternal
* This renames a type, as well as any associated array type.
*
* Caller must have already checked privileges.
*
* Currently this is used for renaming table rowtypes and for
* ALTER TYPE RENAME TO command.
*/
void
RenameTypeInternal(Oid typeOid, const char *newTypeName, Oid typeNamespace)
{
Relation pg_type_desc;
HeapTuple tuple;
Form_pg_type typ;
Oid arrayOid;
Oid oldTypeOid;
pg_type_desc = table_open(TypeRelationId, RowExclusiveLock);
tuple = SearchSysCacheCopy1(TYPEOID, ObjectIdGetDatum(typeOid));
if (!HeapTupleIsValid(tuple))
elog(ERROR, "cache lookup failed for type %u", typeOid);
typ = (Form_pg_type) GETSTRUCT(tuple);
/* We are not supposed to be changing schemas here */
Assert(typeNamespace == typ->typnamespace);
arrayOid = typ->typarray;
/* Check for a conflicting type name. */
oldTypeOid = GetSysCacheOid2(TYPENAMENSP, Anum_pg_type_oid,
CStringGetDatum(newTypeName),
ObjectIdGetDatum(typeNamespace));
/*
* If there is one, see if it's an autogenerated array type, and if so
* rename it out of the way. (But we must skip that for a shell type
* because moveArrayTypeName will do the wrong thing in that case.)
* Otherwise, we can at least give a more friendly error than unique-index
* violation.
*/
if (OidIsValid(oldTypeOid))
{
if (get_typisdefined(oldTypeOid) &&
moveArrayTypeName(oldTypeOid, newTypeName, typeNamespace))
/* successfully dodged the problem */ ;
else
ereport(ERROR,
(errcode(ERRCODE_DUPLICATE_OBJECT),
errmsg("type \"%s\" already exists", newTypeName)));
}
/* OK, do the rename --- tuple is a copy, so OK to scribble on it */
namestrcpy(&(typ->typname), newTypeName);
CatalogTupleUpdate(pg_type_desc, &tuple->t_self, tuple);
InvokeObjectPostAlterHook(TypeRelationId, typeOid, 0);
heap_freetuple(tuple);
table_close(pg_type_desc, RowExclusiveLock);
/*
* If the type has an array type, recurse to handle that. But we don't
* need to do anything more if we already renamed that array type above
* (which would happen when, eg, renaming "foo" to "_foo").
*/
if (OidIsValid(arrayOid) && arrayOid != oldTypeOid)
{
char *arrname = makeArrayTypeName(newTypeName, typeNamespace);
RenameTypeInternal(arrayOid, arrname, typeNamespace);
pfree(arrname);
}
}
