void CALLBACK_SCF(bool val)
{
Bit16u tempf = vPC_rLodsw(SegPhys(ss)+reg_sp+4);
if (val)
tempf |= FLAG_CF;
else
tempf &= ~FLAG_CF;
vPC_rStosw(SegPhys(ss)+reg_sp+4, tempf);
}
void CALLBACK_RunRealFar(Bit16u seg,Bit16u off) {
reg_sp-=4;
mem_writew(SegPhys(ss)+reg_sp,RealOff(CALLBACK_RealPointer(call_stop)));
mem_writew(SegPhys(ss)+reg_sp+2,RealSeg(CALLBACK_RealPointer(call_stop)));
Bit32u oldeip=reg_eip;
Bit16u oldcs=SegValue(cs);
reg_eip=off;
SegSet16(cs,seg);
DOSBOX_RunMachine();
reg_eip=oldeip;
SegSet16(cs,oldcs);
}
void CALLBACK_RunRealFar(Bit16u seg,Bit16u off) {
reg_sp-=4;
mem_writew(SegPhys(ss)+reg_sp,call_stop<<4);
mem_writew(SegPhys(ss)+reg_sp+2,CB_SEG);
Bit32u oldeip=reg_eip;
Bit16u oldcs=SegValue(cs);
reg_eip=off;
SegSet16(cs,seg);
DOSBOX_RunMachine();
reg_eip=oldeip;
SegSet16(cs,oldcs);
}
static void RestoreRegisters(void) {
reg_ax=mem_readw(SegPhys(ss)+reg_sp+ 0);
reg_cx=mem_readw(SegPhys(ss)+reg_sp+ 2);
reg_dx=mem_readw(SegPhys(ss)+reg_sp+ 4);
reg_bx=mem_readw(SegPhys(ss)+reg_sp+ 6);
reg_si=mem_readw(SegPhys(ss)+reg_sp+ 8);
reg_di=mem_readw(SegPhys(ss)+reg_sp+10);
reg_bp=mem_readw(SegPhys(ss)+reg_sp+12);
SegSet16(ds,mem_readw(SegPhys(ss)+reg_sp+14));
SegSet16(es,mem_readw(SegPhys(ss)+reg_sp+16));
reg_sp+=18;
}
static void SaveRegisters(void) {
reg_sp-=18;
mem_writew(SegPhys(ss)+reg_sp+ 0,reg_ax);
mem_writew(SegPhys(ss)+reg_sp+ 2,reg_cx);
mem_writew(SegPhys(ss)+reg_sp+ 4,reg_dx);
mem_writew(SegPhys(ss)+reg_sp+ 6,reg_bx);
mem_writew(SegPhys(ss)+reg_sp+ 8,reg_si);
mem_writew(SegPhys(ss)+reg_sp+10,reg_di);
mem_writew(SegPhys(ss)+reg_sp+12,reg_bp);
mem_writew(SegPhys(ss)+reg_sp+14,SegValue(ds));
mem_writew(SegPhys(ss)+reg_sp+16,SegValue(es));
}
bool DOS_Terminate(bool tsr) {
dos.return_code=reg_al;
dos.return_mode=RETURN_EXIT;
Bit16u mempsp = dos.psp();
DOS_PSP curpsp(mempsp);
if (mempsp==curpsp.GetParent()) return true;
/* Free Files owned by process */
if (!tsr) curpsp.CloseFiles();
/* Get the termination address */
RealPt old22 = curpsp.GetInt22();
/* Restore vector 22,23,24 */
curpsp.RestoreVectors();
/* Set the parent PSP */
dos.psp(curpsp.GetParent());
DOS_PSP parentpsp(curpsp.GetParent());
/* Restore the SS:SP to the previous one */
SegSet16(ss,RealSeg(parentpsp.GetStack()));
reg_sp = RealOff(parentpsp.GetStack());
/* Restore the old CS:IP from int 22h */
RestoreRegisters();
/* Set the CS:IP stored in int 0x22 back on the stack */
mem_writew(SegPhys(ss)+reg_sp+0,RealOff(old22));
mem_writew(SegPhys(ss)+reg_sp+2,RealSeg(old22));
/* set IOPL=3 (Strike Commander), nested task set,
interrupts enabled, test flags cleared */
mem_writew(SegPhys(ss)+reg_sp+4,0x7202);
// Free memory owned by process
if (!tsr) DOS_FreeProcessMemory(mempsp);
DOS_UpdatePSPName();
return true;
}
CacheBlockDynRec * LinkBlocks(BlockReturn ret) {
CacheBlockDynRec * block=NULL;
// the last instruction was a control flow modifying instruction
Bitu temp_ip=SegPhys(cs)+reg_eip;
CodePageHandlerDynRec * temp_handler=(CodePageHandlerDynRec *)get_tlb_readhandler(temp_ip);
if (temp_handler->flags & PFLAG_HASCODE) {
// see if the target is an already translated block
block=temp_handler->FindCacheBlock(temp_ip & 4095);
if (!block) return NULL;
// found it, link the current block to
cache.block.running->LinkTo(ret==BR_Link2,block);
return block;
}
return NULL;
}
static Bitu INT15_Handler(void)
{
static Bit16u biosConfigSeg = 0;
switch (reg_ah)
{
case 0xC0: // Get Configuration
{
if (biosConfigSeg == 0)
biosConfigSeg = DOS_GetPrivatMemory(1); // We have 16 bytes
PhysPt data = SegOff2Ptr(biosConfigSeg, 0);
Mem_Stosw(data, 8); // 8 Bytes following
Mem_Stosb(data+2, 0xFC); // Model ID (PC)
Mem_Stosb(data+3, 0x02); // Submodel ID
Mem_Stosb(data+4, 0x74); // Bios Revision
Mem_Stosb(data+5, 0x70); // Feature Byte 1
Mem_Stosw(data+6, 0); // Feature Byte 2 + 3
Mem_Stosw(data+8, 0); // Feature Byte 4 + 5
CPU_SetSegGeneral(es, biosConfigSeg);
reg_bx = 0;
reg_ah = 0;
CALLBACK_SCF(false);
}
break;
case 0x87: // Copy extended memory
{
Bitu bytes = reg_cx * 2;
PhysPt data = SegPhys(es)+reg_si;
PhysPt source = (Mem_Lodsd(data+0x12) & 0x00FFFFFF) + (Mem_Lodsb(data+0x16)<<24);
PhysPt dest = (Mem_Lodsd(data+0x1A) & 0x00FFFFFF) + (Mem_Lodsb(data+0x1E)<<24);
Mem_rMovsb(dest, source, bytes);
reg_ax = 0;
CALLBACK_SCF(false);
break;
}
case 0x88: // SYSTEM - Get extended memory size in KB (286+)
reg_ax = TotEXTMB*1024;
CALLBACK_SCF(false);
break;
default:
LOG_MSG("Int 15 unhandled call %4X", reg_ax);
reg_ah = 0x86;
CALLBACK_SCF(true);
}
return CBRET_NONE;
}
bool DOS_Execute(char * name,PhysPt block_pt,Bit8u flags) {
EXE_Header head;Bitu i;
Bit16u fhandle;Bit16u len;Bit32u pos;
Bit16u pspseg,envseg,loadseg,memsize,readsize;
PhysPt loadaddress;RealPt relocpt;
Bitu headersize,imagesize;
DOS_ParamBlock block(block_pt);
block.LoadData();
if (flags!=LOADNGO && flags!=OVERLAY && flags!=LOAD) {
E_Exit("DOS:Not supported execute mode %d for file %s",flags,name);
}
/* Check for EXE or COM File */
bool iscom=false;
if (!DOS_OpenFile(name,OPEN_READ,&fhandle)) return false;
len=sizeof(EXE_Header);
if (!DOS_ReadFile(fhandle,(Bit8u *)&head,&len)) {
DOS_CloseFile(fhandle);
return false;
}
if (len<sizeof(EXE_Header)) {
if (len==0) {
/* Prevent executing zero byte files */
DOS_SetError(DOSERR_ACCESS_DENIED);
DOS_CloseFile(fhandle);
return false;
}
/* Otherwise must be a .com file */
iscom=true;
} else {
/* Convert the header to correct endian, i hope this works */
HostPt endian=(HostPt)&head;
for (i=0;i<sizeof(EXE_Header)/2;i++) {
*((Bit16u *)endian)=host_readw(endian);
endian+=2;
}
if ((head.signature!=MAGIC1) && (head.signature!=MAGIC2)) iscom=true;
else {
if(head.pages & ~0x07ff) /* 1 MB dos maximum address limit. Fixes TC3 IDE (kippesoep) */
LOG(LOG_EXEC,LOG_NORMAL)("Weird header: head.pages > 1 MB");
head.pages&=0x07ff;
headersize = head.headersize*16;
imagesize = head.pages*512-headersize;
if (imagesize+headersize<512) imagesize = 512-headersize;
}
}
Bit8u * loadbuf=(Bit8u *)new Bit8u[0x10000];
if (flags!=OVERLAY) {
/* Create an environment block */
envseg=block.exec.envseg;
if (!MakeEnv(name,&envseg)) {
DOS_CloseFile(fhandle);
return false;
}
/* Get Memory */
Bit16u minsize,maxsize;Bit16u maxfree=0xffff;DOS_AllocateMemory(&pspseg,&maxfree);
if (iscom) {
minsize=0x1000;maxsize=0xffff;
if (machine==MCH_PCJR) {
/* try to load file into memory below 96k */
pos=0;DOS_SeekFile(fhandle,&pos,DOS_SEEK_SET);
Bit16u dataread=0x1800;
DOS_ReadFile(fhandle,loadbuf,&dataread);
if (dataread<0x1800) maxsize=dataread;
if (minsize>maxsize) minsize=maxsize;
}
} else { /* Exe size calculated from header */
minsize=long2para(imagesize+(head.minmemory<<4)+256);
if (head.maxmemory!=0) maxsize=long2para(imagesize+(head.maxmemory<<4)+256);
else maxsize=0xffff;
}
if (maxfree<minsize) {
DOS_SetError(DOSERR_INSUFFICIENT_MEMORY);
DOS_FreeMemory(envseg);
return false;
}
if (maxfree<maxsize) memsize=maxfree;
else memsize=maxsize;
if (!DOS_AllocateMemory(&pspseg,&memsize)) E_Exit("DOS:Exec error in memory");
if (iscom && (machine==MCH_PCJR) && (pspseg<0x2000)) {
maxsize=0xffff;
/* resize to full extent of memory block */
DOS_ResizeMemory(pspseg,&maxsize);
/* now try to lock out memory above segment 0x2000 */
if ((real_readb(0x2000,0)==0x5a) && (real_readw(0x2000,1)==0) && (real_readw(0x2000,3)==0x7ffe)) {
/* MCB after PCJr graphics memory region is still free */
if (pspseg+maxsize==0x17ff) {
DOS_MCB cmcb((Bit16u)(pspseg-1));
cmcb.SetType(0x5a); // last block
}
}
}
loadseg=pspseg+16;
if (!iscom) {
/* Check if requested to load program into upper part of allocated memory */
if ((head.minmemory == 0) && (head.maxmemory == 0))
loadseg = ((pspseg+memsize)*0x10-imagesize)/0x10;
}
} else loadseg=block.overlay.loadseg;
/* Load the executable */
loadaddress=PhysMake(loadseg,0);
if (iscom) { /* COM Load 64k - 256 bytes max */
pos=0;DOS_SeekFile(fhandle,&pos,DOS_SEEK_SET);
readsize=0xffff-256;
DOS_ReadFile(fhandle,loadbuf,&readsize);
MEM_BlockWrite(loadaddress,loadbuf,readsize);
} else { /* EXE Load in 32kb blocks and then relocate */
pos=headersize;DOS_SeekFile(fhandle,&pos,DOS_SEEK_SET);
while (imagesize>0x7FFF) {
readsize=0x8000;DOS_ReadFile(fhandle,loadbuf,&readsize);
MEM_BlockWrite(loadaddress,loadbuf,readsize);
// if (readsize!=0x8000) LOG(LOG_EXEC,LOG_NORMAL)("Illegal header");
loadaddress+=0x8000;imagesize-=0x8000;
}
if (imagesize>0) {
readsize=(Bit16u)imagesize;DOS_ReadFile(fhandle,loadbuf,&readsize);
MEM_BlockWrite(loadaddress,loadbuf,readsize);
// if (readsize!=imagesize) LOG(LOG_EXEC,LOG_NORMAL)("Illegal header");
}
/* Relocate the exe image */
Bit16u relocate;
if (flags==OVERLAY) relocate=block.overlay.relocation;
else relocate=loadseg;
pos=head.reloctable;DOS_SeekFile(fhandle,&pos,0);
for (i=0;i<head.relocations;i++) {
readsize=4;DOS_ReadFile(fhandle,(Bit8u *)&relocpt,&readsize);
relocpt=host_readd((HostPt)&relocpt); //Endianize
PhysPt address=PhysMake(RealSeg(relocpt)+loadseg,RealOff(relocpt));
mem_writew(address,mem_readw(address)+relocate);
}
}
delete[] loadbuf;
DOS_CloseFile(fhandle);
/* Setup a psp */
if (flags!=OVERLAY) {
// Create psp after closing exe, to avoid dead file handle of exe in copied psp
SetupPSP(pspseg,memsize,envseg);
SetupCMDLine(pspseg,block);
};
CALLBACK_SCF(false); /* Carry flag cleared for caller if successfull */
if (flags==OVERLAY) return true; /* Everything done for overlays */
RealPt csip,sssp;
if (iscom) {
csip=RealMake(pspseg,0x100);
sssp=RealMake(pspseg,0xfffe);
mem_writew(PhysMake(pspseg,0xfffe),0);
} else {
csip=RealMake(loadseg+head.initCS,head.initIP);
sssp=RealMake(loadseg+head.initSS,head.initSP);
}
if (flags==LOAD) {
DOS_PSP callpsp(dos.psp());
/* Save the SS:SP on the PSP of calling program */
callpsp.SetStack(RealMakeSeg(ss,reg_sp));
/* Switch the psp's */
dos.psp(pspseg);
DOS_PSP newpsp(dos.psp());
dos.dta(RealMake(newpsp.GetSegment(),0x80));
block.exec.initsssp = sssp;
block.exec.initcsip = csip;
block.SaveData();
return true;
}
if (flags==LOADNGO) {
/* Get Caller's program CS:IP of the stack and set termination address to that */
RealSetVec(0x22,RealMake(mem_readw(SegPhys(ss)+reg_sp+2),mem_readw(SegPhys(ss)+reg_sp)));
SaveRegisters();
DOS_PSP callpsp(dos.psp());
/* Save the SS:SP on the PSP of calling program */
callpsp.SetStack(RealMakeSeg(ss,reg_sp));
/* Switch the psp's and set new DTA */
dos.psp(pspseg);
DOS_PSP newpsp(dos.psp());
dos.dta(RealMake(newpsp.GetSegment(),0x80));
/* save vectors */
newpsp.SaveVectors();
/* copy fcbs */
newpsp.SetFCB1(block.exec.fcb1);
newpsp.SetFCB2(block.exec.fcb2);
/* Set the stack for new program */
SegSet16(ss,RealSeg(sssp));reg_sp=RealOff(sssp);
/* Add some flags and CS:IP on the stack for the IRET */
reg_sp-=6;
mem_writew(SegPhys(ss)+reg_sp+0,RealOff(csip));
mem_writew(SegPhys(ss)+reg_sp+2,RealSeg(csip));
/* DOS starts programs with a RETF, so our IRET
should not modify critical flags (IOPL in v86 mode);
interrupt flag is set explicitly, test flags cleared */
mem_writew(SegPhys(ss)+reg_sp+4,(reg_flags&(~FMASK_TEST))|FLAG_IF);
/* Setup the rest of the registers */
reg_ax=reg_bx=0;reg_cx=0xff;
reg_dx=pspseg;
reg_si=RealOff(csip);
reg_di=RealOff(sssp);
reg_bp=0x91c; /* DOS internal stack begin relict */
SegSet16(ds,pspseg);SegSet16(es,pspseg);
#if C_DEBUG
/* Started from debug.com, then set breakpoint at start */
DEBUG_CheckExecuteBreakpoint(RealSeg(csip),RealOff(csip));
#endif
/* Add the filename to PSP and environment MCB's */
char stripname[8];Bitu index=0;
while (char chr=*name++) {
switch (chr) {
case ':':case '\\':case '/':index=0;break;
default:if (index<8) stripname[index++]=toupper(chr);
}
}
index=0;
while (index<8) {
if (stripname[index]=='.') break;
if (!stripname[index]) break;
index++;
}
memset(&stripname[index],0,8-index);
DOS_MCB pspmcb(dos.psp()-1);
pspmcb.SetFileName(stripname);
DOS_UpdatePSPName();
return true;
}
return false;
}
static Bitu INT33_Handler(void) {
// LOG(LOG_MOUSE,LOG_NORMAL)("MOUSE: %04X %X %X %d %d",reg_ax,reg_bx,reg_cx,POS_X,POS_Y);
switch (reg_ax) {
case 0x00: /* Reset Driver and Read Status */
Mouse_ResetHardware(); /* fallthrough */
case 0x21: /* Software Reset */
reg_ax=0xffff;
reg_bx=MOUSE_BUTTONS;
Mouse_Reset();
Mouse_AutoLock(true);
break;
case 0x01: /* Show Mouse */
if(mouse.hidden) mouse.hidden--;
Mouse_AutoLock(true);
DrawCursor();
break;
case 0x02: /* Hide Mouse */
{
if (CurMode->type!=M_TEXT) RestoreCursorBackground();
else RestoreCursorBackgroundText();
mouse.hidden++;
}
break;
case 0x03: /* Return position and Button Status */
reg_bx=mouse.buttons;
reg_cx=POS_X;
reg_dx=POS_Y;
break;
case 0x04: /* Position Mouse */
/* If position isn't different from current position
* don't change it then. (as position is rounded so numbers get
* lost when the rounded number is set) (arena/simulation Wolf) */
if ((Bit16s)reg_cx >= mouse.max_x) mouse.x = static_cast<float>(mouse.max_x);
else if (mouse.min_x >= (Bit16s)reg_cx) mouse.x = static_cast<float>(mouse.min_x);
else if ((Bit16s)reg_cx != POS_X) mouse.x = static_cast<float>(reg_cx);
if ((Bit16s)reg_dx >= mouse.max_y) mouse.y = static_cast<float>(mouse.max_y);
else if (mouse.min_y >= (Bit16s)reg_dx) mouse.y = static_cast<float>(mouse.min_y);
else if ((Bit16s)reg_dx != POS_Y) mouse.y = static_cast<float>(reg_dx);
DrawCursor();
break;
case 0x05: /* Return Button Press Data */
{
Bit16u but=reg_bx;
reg_ax=mouse.buttons;
if (but>=MOUSE_BUTTONS) but = MOUSE_BUTTONS - 1;
reg_cx=mouse.last_pressed_x[but];
reg_dx=mouse.last_pressed_y[but];
reg_bx=mouse.times_pressed[but];
mouse.times_pressed[but]=0;
break;
}
case 0x06: /* Return Button Release Data */
{
Bit16u but=reg_bx;
reg_ax=mouse.buttons;
if (but>=MOUSE_BUTTONS) but = MOUSE_BUTTONS - 1;
reg_cx=mouse.last_released_x[but];
reg_dx=mouse.last_released_y[but];
reg_bx=mouse.times_released[but];
mouse.times_released[but]=0;
break;
}
case 0x07: /* Define horizontal cursor range */
{ //lemmings set 1-640 and wants that. iron seeds set 0-640 but doesn't like 640
//Iron seed works if newvideo mode with mode 13 sets 0-639
//Larry 6 actually wants newvideo mode with mode 13 to set it to 0-319
Bit16s max,min;
if ((Bit16s)reg_cx<(Bit16s)reg_dx) { min=(Bit16s)reg_cx;max=(Bit16s)reg_dx;}
else { min=(Bit16s)reg_dx;max=(Bit16s)reg_cx;}
mouse.min_x=min;
mouse.max_x=max;
/* Battlechess wants this */
if(mouse.x > mouse.max_x) mouse.x = mouse.max_x;
if(mouse.x < mouse.min_x) mouse.x = mouse.min_x;
/* Or alternatively this:
mouse.x = (mouse.max_x - mouse.min_x + 1)/2;*/
LOG(LOG_MOUSE,LOG_NORMAL)("Define Hortizontal range min:%d max:%d",min,max);
}
break;
case 0x08: /* Define vertical cursor range */
{ // not sure what to take instead of the CurMode (see case 0x07 as well)
// especially the cases where sheight= 400 and we set it with the mouse_reset to 200
//disabled it at the moment. Seems to break syndicate who want 400 in mode 13
Bit16s max,min;
if ((Bit16s)reg_cx<(Bit16s)reg_dx) { min=(Bit16s)reg_cx;max=(Bit16s)reg_dx;}
else { min=(Bit16s)reg_dx;max=(Bit16s)reg_cx;}
mouse.min_y=min;
mouse.max_y=max;
/* Battlechess wants this */
if(mouse.y > mouse.max_y) mouse.y = mouse.max_y;
if(mouse.y < mouse.min_y) mouse.y = mouse.min_y;
/* Or alternatively this:
mouse.y = (mouse.max_y - mouse.min_y + 1)/2;*/
LOG(LOG_MOUSE,LOG_NORMAL)("Define Vertical range min:%d max:%d",min,max);
}
break;
case 0x09: /* Define GFX Cursor */
{
PhysPt src = SegPhys(es)+reg_dx;
MEM_BlockRead(src ,userdefScreenMask,CURSORY*2);
MEM_BlockRead(src+CURSORY*2,userdefCursorMask,CURSORY*2);
mouse.screenMask = userdefScreenMask;
mouse.cursorMask = userdefCursorMask;
mouse.hotx = reg_bx;
mouse.hoty = reg_cx;
mouse.cursorType = 2;
DrawCursor();
}
break;
case 0x0a: /* Define Text Cursor */
mouse.cursorType = reg_bx;
mouse.textAndMask = reg_cx;
mouse.textXorMask = reg_dx;
break;
case 0x0b: /* Read Motion Data */
reg_cx=(Bit16s)(mouse.mickey_x*mouse.mickeysPerPixel_x);
reg_dx=(Bit16s)(mouse.mickey_y*mouse.mickeysPerPixel_y);
mouse.mickey_x=0;
mouse.mickey_y=0;
break;
case 0x0c: /* Define interrupt subroutine parameters */
mouse.sub_mask=reg_cx;
mouse.sub_seg=SegValue(es);
mouse.sub_ofs=reg_dx;
Mouse_AutoLock(true); //Some games don't seem to reset the mouse before using
break;
case 0x0f: /* Define mickey/pixel rate */
Mouse_SetMickeyPixelRate(reg_cx,reg_dx);
break;
case 0x10: /* Define screen region for updating */
mouse.updateRegion_x[0]=reg_cx;
mouse.updateRegion_y[0]=reg_dx;
mouse.updateRegion_x[1]=reg_si;
mouse.updateRegion_y[1]=reg_di;
break;
case 0x11: /* Get number of buttons */
reg_ax=0xffff;
reg_bx=MOUSE_BUTTONS;
break;
case 0x13: /* Set double-speed threshold */
mouse.doubleSpeedThreshold=(reg_bx ? reg_bx : 64);
break;
case 0x14: /* Exchange event-handler */
{
Bit16u oldSeg = mouse.sub_seg;
Bit16u oldOfs = mouse.sub_ofs;
Bit16u oldMask= mouse.sub_mask;
// Set new values
mouse.sub_mask= reg_cx;
mouse.sub_seg = SegValue(es);
mouse.sub_ofs = reg_dx;
// Return old values
reg_cx = oldMask;
reg_dx = oldOfs;
SegSet16(es,oldSeg);
}
break;
case 0x15: /* Get Driver storage space requirements */
reg_bx = sizeof(mouse);
break;
case 0x16: /* Save driver state */
{
LOG(LOG_MOUSE,LOG_WARN)("Saving driver state...");
PhysPt dest = SegPhys(es)+reg_dx;
MEM_BlockWrite(dest, &mouse, sizeof(mouse));
}
break;
case 0x17: /* load driver state */
{
LOG(LOG_MOUSE,LOG_WARN)("Loading driver state...");
PhysPt src = SegPhys(es)+reg_dx;
MEM_BlockRead(src, &mouse, sizeof(mouse));
}
break;
case 0x1a: /* Set mouse sensitivity */
// ToDo : double mouse speed value
Mouse_SetSensitivity(reg_bx,reg_cx,reg_dx);
LOG(LOG_MOUSE,LOG_WARN)("Set sensitivity used with %d %d (%d)",reg_bx,reg_cx,reg_dx);
break;
case 0x1b: /* Get mouse sensitivity */
reg_bx = mouse.senv_x_val;
reg_cx = mouse.senv_y_val;
reg_dx = mouse.dspeed_val;
LOG(LOG_MOUSE,LOG_WARN)("Get sensitivity %d %d",reg_bx,reg_cx);
break;
case 0x1c: /* Set interrupt rate */
/* Can't really set a rate this is host determined */
break;
case 0x1d: /* Set display page number */
mouse.page=reg_bl;
break;
case 0x1e: /* Get display page number */
reg_bx=mouse.page;
break;
case 0x1f: /* Disable Mousedriver */
/* ES:BX old mouse driver Zero at the moment TODO */
reg_bx=0;
SegSet16(es,0);
mouse.enabled=false; /* Just for reporting not doing a thing with it */
mouse.oldhidden=mouse.hidden;
mouse.hidden=1;
break;
case 0x20: /* Enable Mousedriver */
mouse.enabled=true;
mouse.hidden=mouse.oldhidden;
break;
case 0x22: /* Set language for messages */
/*
* Values for mouse driver language:
*
* 00h English
* 01h French
* 02h Dutch
* 03h German
* 04h Swedish
* 05h Finnish
* 06h Spanish
* 07h Portugese
* 08h Italian
*
*/
mouse.language=reg_bx;
break;
case 0x23: /* Get language for messages */
reg_bx=mouse.language;
break;
case 0x24: /* Get Software version and mouse type */
reg_bx=0x805; //Version 8.05 woohoo
reg_ch=0x04; /* PS/2 type */
reg_cl=0; /* PS/2 (unused) */
break;
case 0x26: /* Get Maximum virtual coordinates */
reg_bx=(mouse.enabled ? 0x0000 : 0xffff);
reg_cx=(Bit16u)mouse.max_x;
reg_dx=(Bit16u)mouse.max_y;
break;
case 0x31: /* Get Current Minimum/Maximum virtual coordinates */
reg_ax=(Bit16u)mouse.min_x;
reg_bx=(Bit16u)mouse.min_y;
reg_cx=(Bit16u)mouse.max_x;
reg_dx=(Bit16u)mouse.max_y;
break;
default:
LOG(LOG_MOUSE,LOG_ERROR)("Mouse Function %04X not implemented!",reg_ax);
break;
}
return CBRET_NONE;
}
void CALLBACK_SIF(bool val) {
Bit16u tempf = mem_readw(SegPhys(ss)+reg_sp+4);
if (val) tempf |= FLAG_IF;
else tempf &= ~FLAG_IF;
mem_writew(SegPhys(ss)+reg_sp+4,tempf);
}
static Bitu DOS_21Handler(void) {
if (((reg_ah != 0x50) && (reg_ah != 0x51) && (reg_ah != 0x62) && (reg_ah != 0x64)) && (reg_ah<0x6c)) {
DOS_PSP psp(dos.psp());
psp.SetStack(RealMake(SegValue(ss),reg_sp-18));
}
char name1[DOSNAMEBUF+2+DOS_NAMELENGTH_ASCII];
char name2[DOSNAMEBUF+2+DOS_NAMELENGTH_ASCII];
static Bitu time_start = 0; //For emulating temporary time changes.
switch (reg_ah) {
case 0x00: /* Terminate Program */
DOS_Terminate(mem_readw(SegPhys(ss)+reg_sp+2),false,0);
break;
case 0x01: /* Read character from STDIN, with echo */
{
Bit8u c;Bit16u n=1;
dos.echo=true;
DOS_ReadFile(STDIN,&c,&n);
reg_al=c;
dos.echo=false;
}
break;
case 0x02: /* Write character to STDOUT */
{
Bit8u c=reg_dl;Bit16u n=1;
DOS_WriteFile(STDOUT,&c,&n);
//Not in the official specs, but happens nonetheless. (last written character)
reg_al = c;// reg_al=(c==9)?0x20:c; //Officially: tab to spaces
}
break;
case 0x03: /* Read character from STDAUX */
{
Bit16u port = real_readw(0x40,0);
if(port!=0 && serialports[0]) {
Bit8u status;
// RTS/DTR on
IO_WriteB(port+4,0x3);
serialports[0]->Getchar(®_al, &status, true, 0xFFFFFFFF);
}
}
break;
case 0x04: /* Write Character to STDAUX */
{
Bit16u port = real_readw(0x40,0);
if(port!=0 && serialports[0]) {
// RTS/DTR on
IO_WriteB(port+4,0x3);
serialports[0]->Putchar(reg_dl,true,true, 0xFFFFFFFF);
// RTS off
IO_WriteB(port+4,0x1);
}
}
break;
case 0x05: /* Write Character to PRINTER */
E_Exit("DOS:Unhandled call %02X",reg_ah);
break;
case 0x06: /* Direct Console Output / Input */
switch (reg_dl) {
case 0xFF: /* Input */
{
//Simulate DOS overhead for timing sensitive games
//MM1
overhead();
//TODO Make this better according to standards
if (!DOS_GetSTDINStatus()) {
reg_al=0;
CALLBACK_SZF(true);
break;
}
Bit8u c;Bit16u n=1;
DOS_ReadFile(STDIN,&c,&n);
reg_al=c;
CALLBACK_SZF(false);
break;
}
default:
{
Bit8u c = reg_dl;Bit16u n = 1;
DOS_WriteFile(STDOUT,&c,&n);
reg_al = reg_dl;
}
break;
};
break;
case 0x07: /* Character Input, without echo */
{
Bit8u c;Bit16u n=1;
DOS_ReadFile (STDIN,&c,&n);
reg_al=c;
break;
};
case 0x08: /* Direct Character Input, without echo (checks for breaks officially :)*/
{
Bit8u c;Bit16u n=1;
DOS_ReadFile (STDIN,&c,&n);
reg_al=c;
break;
};
case 0x09: /* Write string to STDOUT */
{
Bit8u c;Bit16u n=1;
PhysPt buf=SegPhys(ds)+reg_dx;
while ((c=mem_readb(buf++))!='$') {
DOS_WriteFile(STDOUT,&c,&n);
}
}
break;
case 0x0a: /* Buffered Input */
{
//TODO ADD Break checkin in STDIN but can't care that much for it
PhysPt data=SegPhys(ds)+reg_dx;
Bit8u free=mem_readb(data);
Bit8u read=0;Bit8u c;Bit16u n=1;
if (!free) break;
free--;
for(;;) {
DOS_ReadFile(STDIN,&c,&n);
if (c == 8) { // Backspace
if (read) { //Something to backspace.
// STDOUT treats backspace as non-destructive.
DOS_WriteFile(STDOUT,&c,&n);
c = ' '; DOS_WriteFile(STDOUT,&c,&n);
c = 8; DOS_WriteFile(STDOUT,&c,&n);
--read;
}
continue;
}
if (read == free && c != 13) { // Keyboard buffer full
Bit8u bell = 7;
DOS_WriteFile(STDOUT, &bell, &n);
continue;
}
DOS_WriteFile(STDOUT,&c,&n);
mem_writeb(data+read+2,c);
if (c==13)
break;
read++;
};
mem_writeb(data+1,read);
break;
};
case 0x0b: /* Get STDIN Status */
if (!DOS_GetSTDINStatus()) {reg_al=0x00;}
else {reg_al=0xFF;}
//Simulate some overhead for timing issues
//Tankwar menu (needs maybe even more)
overhead();
break;
case 0x0c: /* Flush Buffer and read STDIN call */
{
/* flush buffer if STDIN is CON */
Bit8u handle=RealHandle(STDIN);
if (handle!=0xFF && Files[handle] && Files[handle]->IsName("CON")) {
Bit8u c;Bit16u n;
while (DOS_GetSTDINStatus()) {
n=1; DOS_ReadFile(STDIN,&c,&n);
}
}
switch (reg_al) {
case 0x1:
case 0x6:
case 0x7:
case 0x8:
case 0xa:
{
Bit8u oldah=reg_ah;
reg_ah=reg_al;
DOS_21Handler();
reg_ah=oldah;
}
break;
default:
// LOG_ERROR("DOS:0C:Illegal Flush STDIN Buffer call %d",reg_al);
reg_al=0;
break;
}
}
break;
//TODO Find out the values for when reg_al!=0
//TODO Hope this doesn't do anything special
case 0x0d: /* Disk Reset */
//Sure let's reset a virtual disk
break;
case 0x0e: /* Select Default Drive */
DOS_SetDefaultDrive(reg_dl);
reg_al=DOS_DRIVES;
break;
case 0x0f: /* Open File using FCB */
if(DOS_FCBOpen(SegValue(ds),reg_dx)){
reg_al=0;
}else{
reg_al=0xff;
}
LOG(LOG_FCB,LOG_NORMAL)("DOS:0x0f FCB-fileopen used, result:al=%d",reg_al);
break;
case 0x10: /* Close File using FCB */
if(DOS_FCBClose(SegValue(ds),reg_dx)){
reg_al=0;
}else{
reg_al=0xff;
}
LOG(LOG_FCB,LOG_NORMAL)("DOS:0x10 FCB-fileclose used, result:al=%d",reg_al);
break;
case 0x11: /* Find First Matching File using FCB */
if(DOS_FCBFindFirst(SegValue(ds),reg_dx)) reg_al = 0x00;
else reg_al = 0xFF;
LOG(LOG_FCB,LOG_NORMAL)("DOS:0x11 FCB-FindFirst used, result:al=%d",reg_al);
break;
case 0x12: /* Find Next Matching File using FCB */
if(DOS_FCBFindNext(SegValue(ds),reg_dx)) reg_al = 0x00;
else reg_al = 0xFF;
LOG(LOG_FCB,LOG_NORMAL)("DOS:0x12 FCB-FindNext used, result:al=%d",reg_al);
break;
case 0x13: /* Delete File using FCB */
if (DOS_FCBDeleteFile(SegValue(ds),reg_dx)) reg_al = 0x00;
else reg_al = 0xFF;
LOG(LOG_FCB,LOG_NORMAL)("DOS:0x16 FCB-Delete used, result:al=%d",reg_al);
break;
case 0x14: /* Sequential read from FCB */
reg_al = DOS_FCBRead(SegValue(ds),reg_dx,0);
LOG(LOG_FCB,LOG_NORMAL)("DOS:0x14 FCB-Read used, result:al=%d",reg_al);
break;
case 0x15: /* Sequential write to FCB */
reg_al=DOS_FCBWrite(SegValue(ds),reg_dx,0);
LOG(LOG_FCB,LOG_NORMAL)("DOS:0x15 FCB-Write used, result:al=%d",reg_al);
break;
case 0x16: /* Create or truncate file using FCB */
if (DOS_FCBCreate(SegValue(ds),reg_dx)) reg_al = 0x00;
else reg_al = 0xFF;
LOG(LOG_FCB,LOG_NORMAL)("DOS:0x16 FCB-Create used, result:al=%d",reg_al);
break;
case 0x17: /* Rename file using FCB */
if (DOS_FCBRenameFile(SegValue(ds),reg_dx)) reg_al = 0x00;
else reg_al = 0xFF;
break;
case 0x1b: /* Get allocation info for default drive */
if (!DOS_GetAllocationInfo(0,®_cx,®_al,®_dx)) reg_al=0xff;
break;
case 0x1c: /* Get allocation info for specific drive */
if (!DOS_GetAllocationInfo(reg_dl,®_cx,®_al,®_dx)) reg_al=0xff;
break;
case 0x21: /* Read random record from FCB */
{
Bit16u toread=1;
reg_al = DOS_FCBRandomRead(SegValue(ds),reg_dx,&toread,true);
}
LOG(LOG_FCB,LOG_NORMAL)("DOS:0x21 FCB-Random read used, result:al=%d",reg_al);
break;
case 0x22: /* Write random record to FCB */
{
Bit16u towrite=1;
reg_al=DOS_FCBRandomWrite(SegValue(ds),reg_dx,&towrite,true);
}
LOG(LOG_FCB,LOG_NORMAL)("DOS:0x22 FCB-Random write used, result:al=%d",reg_al);
break;
case 0x23: /* Get file size for FCB */
if (DOS_FCBGetFileSize(SegValue(ds),reg_dx)) reg_al = 0x00;
else reg_al = 0xFF;
break;
case 0x24: /* Set Random Record number for FCB */
DOS_FCBSetRandomRecord(SegValue(ds),reg_dx);
break;
case 0x27: /* Random block read from FCB */
reg_al = DOS_FCBRandomRead(SegValue(ds),reg_dx,®_cx,false);
LOG(LOG_FCB,LOG_NORMAL)("DOS:0x27 FCB-Random(block) read used, result:al=%d",reg_al);
break;
case 0x28: /* Random Block write to FCB */
reg_al=DOS_FCBRandomWrite(SegValue(ds),reg_dx,®_cx,false);
LOG(LOG_FCB,LOG_NORMAL)("DOS:0x28 FCB-Random(block) write used, result:al=%d",reg_al);
break;
case 0x29: /* Parse filename into FCB */
{
Bit8u difference;
char string[1024];
MEM_StrCopy(SegPhys(ds)+reg_si,string,1023); // 1024 toasts the stack
reg_al=FCB_Parsename(SegValue(es),reg_di,reg_al ,string, &difference);
reg_si+=difference;
}
LOG(LOG_FCB,LOG_NORMAL)("DOS:29:FCB Parse Filename, result:al=%d",reg_al);
break;
case 0x19: /* Get current default drive */
reg_al=DOS_GetDefaultDrive();
break;
case 0x1a: /* Set Disk Transfer Area Address */
dos.dta(RealMakeSeg(ds,reg_dx));
break;
case 0x25: /* Set Interrupt Vector */
RealSetVec(reg_al,RealMakeSeg(ds,reg_dx));
break;
case 0x26: /* Create new PSP */
DOS_NewPSP(reg_dx,DOS_PSP(dos.psp()).GetSize());
reg_al=0xf0; /* al destroyed */
break;
case 0x2a: /* Get System Date */
{
reg_ax=0; // get time
CALLBACK_RunRealInt(0x1a);
if(reg_al) DOS_AddDays(reg_al);
int a = (14 - dos.date.month)/12;
int y = dos.date.year - a;
int m = dos.date.month + 12*a - 2;
reg_al=(dos.date.day+y+(y/4)-(y/100)+(y/400)+(31*m)/12) % 7;
reg_cx=dos.date.year;
reg_dh=dos.date.month;
reg_dl=dos.date.day;
}
break;
case 0x2b: /* Set System Date */
if (reg_cx<1980) { reg_al=0xff;break;}
if ((reg_dh>12) || (reg_dh==0)) { reg_al=0xff;break;}
if (reg_dl==0) { reg_al=0xff;break;}
if (reg_dl>DOS_DATE_months[reg_dh]) {
if(!((reg_dh==2)&&(reg_cx%4 == 0)&&(reg_dl==29))) // february pass
{ reg_al=0xff;break; }
}
dos.date.year=reg_cx;
dos.date.month=reg_dh;
dos.date.day=reg_dl;
reg_al=0;
break;
case 0x2c: { /* Get System Time */
reg_ax=0; // get time
CALLBACK_RunRealInt(0x1a);
if(reg_al) DOS_AddDays(reg_al);
reg_ah=0x2c;
Bitu ticks=((Bitu)reg_cx<<16)|reg_dx;
if(time_start<=ticks) ticks-=time_start;
Bitu time=(Bitu)((100.0/((double)PIT_TICK_RATE/65536.0)) * (double)ticks);
reg_dl=(Bit8u)((Bitu)time % 100); // 1/100 seconds
time/=100;
reg_dh=(Bit8u)((Bitu)time % 60); // seconds
time/=60;
reg_cl=(Bit8u)((Bitu)time % 60); // minutes
time/=60;
reg_ch=(Bit8u)((Bitu)time % 24); // hours
//Simulate DOS overhead for timing-sensitive games
//Robomaze 2
overhead();
break;
}
case 0x2d: /* Set System Time */
LOG(LOG_DOSMISC,LOG_ERROR)("DOS:Set System Time not supported");
//Check input parameters nonetheless
if( reg_ch > 23 || reg_cl > 59 || reg_dh > 59 || reg_dl > 99 )
reg_al = 0xff;
else { //Allow time to be set to zero. Restore the orginal time for all other parameters. (QuickBasic)
if (reg_cx == 0 && reg_dx == 0) {time_start = mem_readd(BIOS_TIMER);LOG_MSG("Warning: game messes with DOS time!");}
else time_start = 0;
reg_al = 0;
}
break;
case 0x2e: /* Set Verify flag */
dos.verify=(reg_al==1);
break;
case 0x2f: /* Get Disk Transfer Area */
SegSet16(es,RealSeg(dos.dta()));
reg_bx=RealOff(dos.dta());
break;
case 0x30: /* Get DOS Version */
if (reg_al==0) reg_bh=0xFF; /* Fake Microsoft DOS */
if (reg_al==1) reg_bh=0x10; /* DOS is in HMA */
reg_al=dos.version.major;
reg_ah=dos.version.minor;
/* Serialnumber */
reg_bl=0x00;
reg_cx=0x0000;
break;
case 0x31: /* Terminate and stay resident */
// Important: This service does not set the carry flag!
DOS_ResizeMemory(dos.psp(),®_dx);
DOS_Terminate(dos.psp(),true,reg_al);
break;
case 0x1f: /* Get drive parameter block for default drive */
case 0x32: /* Get drive parameter block for specific drive */
{ /* Officially a dpb should be returned as well. The disk detection part is implemented */
Bit8u drive=reg_dl;
if (!drive || reg_ah==0x1f) drive = DOS_GetDefaultDrive();
else drive--;
if (Drives[drive]) {
reg_al = 0x00;
SegSet16(ds,dos.tables.dpb);
reg_bx = drive;//Faking only the first entry (that is the driveletter)
LOG(LOG_DOSMISC,LOG_ERROR)("Get drive parameter block.");
} else {
reg_al=0xff;
}
}
break;
case 0x33: /* Extended Break Checking */
switch (reg_al) {
case 0:reg_dl=dos.breakcheck;break; /* Get the breakcheck flag */
case 1:dos.breakcheck=(reg_dl>0);break; /* Set the breakcheck flag */
case 2:{bool old=dos.breakcheck;dos.breakcheck=(reg_dl>0);reg_dl=old;}break;
case 3: /* Get cpsw */
/* Fallthrough */
case 4: /* Set cpsw */
LOG(LOG_DOSMISC,LOG_ERROR)("Someone playing with cpsw %x",reg_ax);
break;
case 5:reg_dl=3;break;//TODO should be z /* Always boot from c: :) */
case 6: /* Get true version number */
reg_bl=dos.version.major;
reg_bh=dos.version.minor;
reg_dl=dos.version.revision;
reg_dh=0x10; /* Dos in HMA */
break;
default:
LOG(LOG_DOSMISC,LOG_ERROR)("Weird 0x33 call %2X",reg_al);
reg_al =0xff;
break;
}
break;
case 0x34: /* Get INDos Flag */
SegSet16(es,DOS_SDA_SEG);
reg_bx=DOS_SDA_OFS + 0x01;
break;
case 0x35: /* Get interrupt vector */
reg_bx=real_readw(0,((Bit16u)reg_al)*4);
SegSet16(es,real_readw(0,((Bit16u)reg_al)*4+2));
break;
case 0x36: /* Get Free Disk Space */
{
Bit16u bytes,clusters,free;
Bit8u sectors;
if (DOS_GetFreeDiskSpace(reg_dl,&bytes,§ors,&clusters,&free)) {
reg_ax=sectors;
reg_bx=free;
reg_cx=bytes;
reg_dx=clusters;
} else {
Bit8u drive=reg_dl;
if (drive==0) drive=DOS_GetDefaultDrive();
else drive--;
if (drive<2) {
// floppy drive, non-present drivesdisks issue floppy check through int24
// (critical error handler); needed for Mixed up Mother Goose (hook)
// CALLBACK_RunRealInt(0x24);
}
reg_ax=0xffff; // invalid drive specified
}
}
break;
case 0x37: /* Get/Set Switch char Get/Set Availdev thing */
//TODO Give errors for these functions to see if anyone actually uses this shit-
switch (reg_al) {
case 0:
reg_al=0;reg_dl=0x2f;break; /* always return '/' like dos 5.0+ */
case 1:
reg_al=0;break;
case 2:
reg_al=0;reg_dl=0x2f;break;
case 3:
reg_al=0;break;
};
LOG(LOG_MISC,LOG_ERROR)("DOS:0x37:Call for not supported switchchar");
break;
case 0x38: /* Set Country Code */
if (reg_al==0) { /* Get country specidic information */
PhysPt dest = SegPhys(ds)+reg_dx;
MEM_BlockWrite(dest,dos.tables.country,0x18);
reg_ax = reg_bx = 0x01;
CALLBACK_SCF(false);
break;
} else { /* Set country code */
LOG(LOG_MISC,LOG_ERROR)("DOS:Setting country code not supported");
}
CALLBACK_SCF(true);
break;
case 0x39: /* MKDIR Create directory */
MEM_StrCopy(SegPhys(ds)+reg_dx,name1,DOSNAMEBUF);
if (DOS_MakeDir(name1)) {
reg_ax=0x05; /* ax destroyed */
CALLBACK_SCF(false);
} else {
reg_ax=dos.errorcode;
CALLBACK_SCF(true);
}
break;
case 0x3a: /* RMDIR Remove directory */
MEM_StrCopy(SegPhys(ds)+reg_dx,name1,DOSNAMEBUF);
if (DOS_RemoveDir(name1)) {
reg_ax=0x05; /* ax destroyed */
CALLBACK_SCF(false);
} else {
reg_ax=dos.errorcode;
CALLBACK_SCF(true);
LOG(LOG_MISC,LOG_NORMAL)("Remove dir failed on %s with error %X",name1,dos.errorcode);
}
break;
case 0x3b: /* CHDIR Set current directory */
MEM_StrCopy(SegPhys(ds)+reg_dx,name1,DOSNAMEBUF);
if (DOS_ChangeDir(name1)) {
reg_ax=0x00; /* ax destroyed */
CALLBACK_SCF(false);
} else {
reg_ax=dos.errorcode;
CALLBACK_SCF(true);
}
break;
case 0x3c: /* CREATE Create of truncate file */
MEM_StrCopy(SegPhys(ds)+reg_dx,name1,DOSNAMEBUF);
if (DOS_CreateFile(name1,reg_cx,®_ax)) {
CALLBACK_SCF(false);
} else {
reg_ax=dos.errorcode;
CALLBACK_SCF(true);
}
break;
case 0x3d: /* OPEN Open existing file */
MEM_StrCopy(SegPhys(ds)+reg_dx,name1,DOSNAMEBUF);
if (DOS_OpenFile(name1,reg_al,®_ax)) {
CALLBACK_SCF(false);
} else {
reg_ax=dos.errorcode;
CALLBACK_SCF(true);
}
break;
case 0x3e: /* CLOSE Close file */
if (DOS_CloseFile(reg_bx)) {
// reg_al=0x01; /* al destroyed. Refcount */
CALLBACK_SCF(false);
} else {
reg_ax=dos.errorcode;
CALLBACK_SCF(true);
}
break;
case 0x3f: /* READ Read from file or device */
{
Bit16u toread=reg_cx;
dos.echo=true;
if (DOS_ReadFile(reg_bx,dos_copybuf,&toread)) {
MEM_BlockWrite(SegPhys(ds)+reg_dx,dos_copybuf,toread);
reg_ax=toread;
CALLBACK_SCF(false);
} else {
reg_ax=dos.errorcode;
CALLBACK_SCF(true);
}
modify_cycles(reg_ax);
dos.echo=false;
break;
}
case 0x40: /* WRITE Write to file or device */
{
Bit16u towrite=reg_cx;
MEM_BlockRead(SegPhys(ds)+reg_dx,dos_copybuf,towrite);
if (DOS_WriteFile(reg_bx,dos_copybuf,&towrite)) {
reg_ax=towrite;
CALLBACK_SCF(false);
} else {
reg_ax=dos.errorcode;
CALLBACK_SCF(true);
}
modify_cycles(reg_ax);
break;
};
case 0x41: /* UNLINK Delete file */
MEM_StrCopy(SegPhys(ds)+reg_dx,name1,DOSNAMEBUF);
if (DOS_UnlinkFile(name1)) {
CALLBACK_SCF(false);
} else {
reg_ax=dos.errorcode;
CALLBACK_SCF(true);
}
break;
case 0x42: /* LSEEK Set current file position */
{
Bit32u pos=(reg_cx<<16) + reg_dx;
if (DOS_SeekFile(reg_bx,&pos,reg_al)) {
reg_dx=(Bit16u)(pos >> 16);
reg_ax=(Bit16u)(pos & 0xFFFF);
CALLBACK_SCF(false);
} else {
reg_ax=dos.errorcode;
CALLBACK_SCF(true);
}
break;
}
bool DOS_IOCTL(void) {
Bitu handle=0;Bit8u drive=0;
/* calls 0-4,6,7,10,12,16 use a file handle */
if ((reg_al<4) || (reg_al==0x06) || (reg_al==0x07) || (reg_al==0x0a) || (reg_al==0x0c) || (reg_al==0x10)) {
handle=RealHandle(reg_bx);
if (handle>=DOS_FILES) {
DOS_SetError(DOSERR_INVALID_HANDLE);
return false;
}
if (!Files[handle]) {
DOS_SetError(DOSERR_INVALID_HANDLE);
return false;
}
} else if (reg_al<0x12) { /* those use a diskdrive except 0x0b */
if (reg_al!=0x0b) {
drive=reg_bl;if (!drive) drive = DOS_GetDefaultDrive();else drive--;
if( !(( drive < DOS_DRIVES ) && Drives[drive]) ) {
DOS_SetError(DOSERR_INVALID_DRIVE);
return false;
}
}
} else {
LOG(LOG_DOSMISC,LOG_ERROR)("DOS:IOCTL Call %2X unhandled",reg_al);
DOS_SetError(DOSERR_FUNCTION_NUMBER_INVALID);
return false;
}
switch(reg_al) {
case 0x00: /* Get Device Information */
if (Files[handle]->GetInformation() & 0x8000) { //Check for device
reg_dx=Files[handle]->GetInformation();
} else {
Bit8u hdrive=Files[handle]->GetDrive();
if (hdrive==0xff) {
LOG(LOG_IOCTL,LOG_NORMAL)("00:No drive set");
hdrive=2; // defaulting to C:
}
/* return drive number in lower 5 bits for block devices */
reg_dx=(Files[handle]->GetInformation()&0xffe0)|hdrive;
}
reg_ax=reg_dx; //Destroyed officially
return true;
case 0x01: /* Set Device Information */
if (reg_dh != 0) {
DOS_SetError(DOSERR_DATA_INVALID);
return false;
} else {
if (Files[handle]->GetInformation() & 0x8000) { //Check for device
reg_al=(Bit8u)(Files[handle]->GetInformation() & 0xff);
} else {
DOS_SetError(DOSERR_FUNCTION_NUMBER_INVALID);
return false;
}
}
return true;
case 0x02: /* Read from Device Control Channel */
if (Files[handle]->GetInformation() & 0xc000) {
/* is character device with IOCTL support */
PhysPt bufptr=PhysMake(SegValue(ds),reg_dx);
Bit16u retcode=0;
if (((DOS_Device*)(Files[handle]))->ReadFromControlChannel(bufptr,reg_cx,&retcode)) {
reg_ax=retcode;
return true;
}
}
DOS_SetError(DOSERR_FUNCTION_NUMBER_INVALID);
return false;
case 0x03: /* Write to Device Control Channel */
if (Files[handle]->GetInformation() & 0xc000) {
/* is character device with IOCTL support */
PhysPt bufptr=PhysMake(SegValue(ds),reg_dx);
Bit16u retcode=0;
if (((DOS_Device*)(Files[handle]))->WriteToControlChannel(bufptr,reg_cx,&retcode)) {
reg_ax=retcode;
return true;
}
}
DOS_SetError(DOSERR_FUNCTION_NUMBER_INVALID);
return false;
case 0x06: /* Get Input Status */
if (Files[handle]->GetInformation() & 0x8000) { //Check for device
reg_al=(Files[handle]->GetInformation() & 0x40) ? 0x0 : 0xff;
} else { // FILE
Bit32u oldlocation=0;
Files[handle]->Seek(&oldlocation, DOS_SEEK_CUR);
Bit32u endlocation=0;
Files[handle]->Seek(&endlocation, DOS_SEEK_END);
if(oldlocation < endlocation){//Still data available
reg_al=0xff;
} else {
reg_al=0x0; //EOF or beyond
}
Files[handle]->Seek(&oldlocation, DOS_SEEK_SET); //restore filelocation
LOG(LOG_IOCTL,LOG_NORMAL)("06:Used Get Input Status on regular file with handle %d",handle);
}
return true;
case 0x07: /* Get Output Status */
LOG(LOG_IOCTL,LOG_NORMAL)("07:Fakes output status is ready for handle %d",handle);
reg_al=0xff;
return true;
case 0x08: /* Check if block device removable */
/* cdrom drives and drive a&b are removable */
if (drive < 2) reg_ax=0;
else if (!Drives[drive]->isRemovable()) reg_ax=1;
else {
DOS_SetError(DOSERR_FUNCTION_NUMBER_INVALID);
return false;
}
return true;
case 0x09: /* Check if block device remote */
if (Drives[drive]->isRemote()) {
reg_dx=0x1000; // device is remote
// undocumented bits always clear
} else {
reg_dx=0x0802; // Open/Close supported; 32bit access supported (any use? fixes Fable installer)
// undocumented bits from device attribute word
// TODO Set bit 9 on drives that don't support direct I/O
}
reg_ax=0x300;
return true;
case 0x0B: /* Set sharing retry count */
if (reg_dx==0) {
DOS_SetError(DOSERR_FUNCTION_NUMBER_INVALID);
return false;
}
return true;
case 0x0D: /* Generic block device request */
{
if (Drives[drive]->isRemovable()) {
DOS_SetError(DOSERR_FUNCTION_NUMBER_INVALID);
return false;
}
PhysPt ptr = SegPhys(ds)+reg_dx;
switch (reg_cl) {
case 0x60: /* Get Device parameters */
mem_writeb(ptr ,0x03); // special function
mem_writeb(ptr+1,(drive>=2)?0x05:0x14); // fixed disc(5), 1.44 floppy(14)
mem_writew(ptr+2,drive>=2); // nonremovable ?
mem_writew(ptr+4,0x0000); // num of cylinders
mem_writeb(ptr+6,0x00); // media type (00=other type)
// drive parameter block following
mem_writeb(ptr+7,drive); // drive
mem_writeb(ptr+8,0x00); // unit number
mem_writed(ptr+0x1f,0xffffffff); // next parameter block
break;
case 0x46:
case 0x66: /* Volume label */
{
char const* bufin=Drives[drive]->GetLabel();
char buffer[11] ={' '};
char const* find_ext=strchr(bufin,'.');
if (find_ext) {
Bitu size=(Bitu)(find_ext-bufin);
if (size>8) size=8;
memcpy(buffer,bufin,size);
find_ext++;
memcpy(buffer+size,find_ext,(strlen(find_ext)>3) ? 3 : strlen(find_ext));
} else {
memcpy(buffer,bufin,(strlen(bufin) > 8) ? 8 : strlen(bufin));
}
char buf2[8]={ 'F','A','T','1','6',' ',' ',' '};
if(drive<2) buf2[4] = '2'; //FAT12 for floppies
mem_writew(ptr+0,0); // 0
mem_writed(ptr+2,0x1234); //Serial number
MEM_BlockWrite(ptr+6,buffer,11);//volumename
if(reg_cl == 0x66) MEM_BlockWrite(ptr+0x11, buf2,8);//filesystem
}
break;
default :
LOG(LOG_IOCTL,LOG_ERROR)("DOS:IOCTL Call 0D:%2X Drive %2X unhandled",reg_cl,drive);
DOS_SetError(DOSERR_FUNCTION_NUMBER_INVALID);
return false;
}
return true;
}
case 0x0E: /* Get Logical Drive Map */
if (Drives[drive]->isRemovable()) {
DOS_SetError(DOSERR_FUNCTION_NUMBER_INVALID);
return false;
}
reg_al = 0; /* Only 1 logical drive assigned */
return true;
default:
LOG(LOG_DOSMISC,LOG_ERROR)("DOS:IOCTL Call %2X unhandled",reg_al);
DOS_SetError(DOSERR_FUNCTION_NUMBER_INVALID);
break;
}
return false;
}
static Bitu VESA_PMSetPalette(void) {
VESA_SetPalette(SegPhys(es) + reg_edi, reg_dx, reg_cx );
return 0;
}
Bitu XMS_Handler(void) {
// LOG(LOG_MISC,LOG_ERROR)("XMS: CALL %02X",reg_ah);
switch (reg_ah) {
case XMS_GET_VERSION: /* 00 */
reg_ax=XMS_VERSION;
reg_bx=XMS_DRIVER_VERSION;
reg_dx=0; /* No we don't have HMA */
break;
case XMS_ALLOCATE_HIGH_MEMORY: /* 01 */
reg_ax=0;
reg_bl=HIGH_MEMORY_NOT_EXIST;
break;
case XMS_FREE_HIGH_MEMORY: /* 02 */
reg_ax=0;
reg_bl=HIGH_MEMORY_NOT_EXIST;
break;
case XMS_GLOBAL_ENABLE_A20: /* 03 */
case XMS_LOCAL_ENABLE_A20: /* 05 */
SET_RESULT(XMS_EnableA20(true));
break;
case XMS_GLOBAL_DISABLE_A20: /* 04 */
case XMS_LOCAL_DISABLE_A20: /* 06 */
SET_RESULT(XMS_EnableA20(false));
break;
case XMS_QUERY_A20: /* 07 */
reg_ax = XMS_GetEnabledA20();
reg_bl = 0;
break;
case XMS_QUERY_FREE_EXTENDED_MEMORY: /* 08 */
reg_bl = XMS_QueryFreeMemory(reg_ax,reg_dx);
break;
case XMS_ALLOCATE_ANY_MEMORY: /* 89 */
reg_edx &= 0xffff;
// fall through
case XMS_ALLOCATE_EXTENDED_MEMORY: /* 09 */
{
Bit16u handle = 0;
SET_RESULT(XMS_AllocateMemory(reg_dx,handle));
reg_dx = handle;
}; break;
case XMS_FREE_EXTENDED_MEMORY: /* 0a */
SET_RESULT(XMS_FreeMemory(reg_dx));
break;
case XMS_MOVE_EXTENDED_MEMORY_BLOCK: /* 0b */
SET_RESULT(XMS_MoveMemory(SegPhys(ds)+reg_si),false);
break;
case XMS_LOCK_EXTENDED_MEMORY_BLOCK: { /* 0c */
Bit32u address;
Bitu res = XMS_LockMemory(reg_dx, address);
if(res) reg_bl = (Bit8u)res;
reg_ax = (res==0);
if (res==0) { // success
reg_bx=(Bit16u)(address & 0xFFFF);
reg_dx=(Bit16u)(address >> 16);
};
}; break;
case XMS_UNLOCK_EXTENDED_MEMORY_BLOCK: /* 0d */
SET_RESULT(XMS_UnlockMemory(reg_dx));
break;
case XMS_GET_EMB_HANDLE_INFORMATION: /* 0e */
SET_RESULT(XMS_GetHandleInformation(reg_dx,reg_bh,reg_bl,reg_dx),false);
break;
case XMS_RESIZE_ANY_EXTENDED_MEMORY_BLOCK: /* 0x8f */
if(reg_ebx > reg_bx) LOG_MSG("64MB memory limit!");
//fall through
case XMS_RESIZE_EXTENDED_MEMORY_BLOCK: /* 0f */
SET_RESULT(XMS_ResizeMemory(reg_dx, reg_bx));
break;
case XMS_ALLOCATE_UMB: { /* 10 */
if (!umb_available) {
reg_ax=0;
reg_bl=XMS_FUNCTION_NOT_IMPLEMENTED;
break;
}
Bit16u umb_start=dos_infoblock.GetStartOfUMBChain();
if (umb_start==0xffff) {
reg_ax=0;
reg_bl=UMB_NO_BLOCKS_AVAILABLE;
reg_dx=0; // no upper memory available
break;
}
/* Save status and linkage of upper UMB chain and link upper
memory to the regular MCB chain */
Bit8u umb_flag=dos_infoblock.GetUMBChainState();
if ((umb_flag&1)==0) DOS_LinkUMBsToMemChain(1);
Bit8u old_memstrat=DOS_GetMemAllocStrategy()&0xff;
DOS_SetMemAllocStrategy(0x40); // search in UMBs only
Bit16u size=reg_dx;Bit16u seg;
if (DOS_AllocateMemory(&seg,&size)) {
reg_ax=1;
reg_bx=seg;
} else {
reg_ax=0;
if (size==0) reg_bl=UMB_NO_BLOCKS_AVAILABLE;
else reg_bl=UMB_ONLY_SMALLER_BLOCK;
reg_dx=size; // size of largest available UMB
}
/* Restore status and linkage of upper UMB chain */
Bit8u current_umb_flag=dos_infoblock.GetUMBChainState();
if ((current_umb_flag&1)!=(umb_flag&1)) DOS_LinkUMBsToMemChain(umb_flag);
DOS_SetMemAllocStrategy(old_memstrat);
}
break;
case XMS_DEALLOCATE_UMB: /* 11 */
if (!umb_available) {
reg_ax=0;
reg_bl=XMS_FUNCTION_NOT_IMPLEMENTED;
break;
}
if (dos_infoblock.GetStartOfUMBChain()!=0xffff) {
if (DOS_FreeMemory(reg_dx)) {
reg_ax=0x0001;
break;
}
}
reg_ax=0x0000;
reg_bl=UMB_NO_BLOCKS_AVAILABLE;
break;
case XMS_QUERY_ANY_FREE_MEMORY: /* 88 */
reg_bl = XMS_QueryFreeMemory(reg_ax,reg_dx);
reg_eax &= 0xffff;
reg_edx &= 0xffff;
reg_ecx = (MEM_TotalPages()*MEM_PAGESIZE)-1; // highest known physical memory address
break;
case XMS_GET_EMB_HANDLE_INFORMATION_EXT: { /* 8e */
Bit8u free_handles;
Bitu result = XMS_GetHandleInformation(reg_dx,reg_bh,free_handles,reg_dx);
if (result != 0) reg_bl = result;
else {
reg_edx &= 0xffff;
reg_cx = free_handles;
}
reg_ax = (result==0);
} break;
default:
LOG(LOG_MISC,LOG_ERROR)("XMS: unknown function %02X",reg_ah);
reg_ax=0;
reg_bl=XMS_FUNCTION_NOT_IMPLEMENTED;
}
void CALLBACK_SCF(bool val) {
Bit16u tempf=mem_readw(SegPhys(ss)+reg_sp+4) & 0xFFFE;
Bit16u newCF=(val==true);
mem_writew(SegPhys(ss)+reg_sp+4,(tempf | newCF));
};
void CALLBACK_SZF(bool val) {
Bit16u tempf=mem_readw(SegPhys(ss)+reg_sp+4) & 0xFFBF;
Bit16u newZF=(val==true) << 6;
mem_writew(SegPhys(ss)+reg_sp+4,(tempf | newZF));
};
bool DOS_Shell::Execute(char * name,char * args) {
/* return true => don't check for hardware changes in do_command
* return false => check for hardware changes in do_command */
char fullname[DOS_PATHLENGTH+4]; //stores results from Which
char* p_fullname;
char line[CMD_MAXLINE];
if(strlen(args)!= 0){
if(*args != ' '){ //put a space in front
line[0]=' ';line[1]=0;
strncat(line,args,CMD_MAXLINE-2);
line[CMD_MAXLINE-1]=0;
}
else
{
safe_strncpy(line,args,CMD_MAXLINE);
}
}else{
line[0]=0;
};
/* check for a drive change */
if (((strcmp(name + 1, ":") == 0) || (strcmp(name + 1, ":\\") == 0)) && isalpha(*name))
{
if (!DOS_SetDrive(toupper(name[0])-'A')) {
WriteOut(MSG_Get("SHELL_EXECUTE_DRIVE_NOT_FOUND"),toupper(name[0]));
}
return true;
}
/* Check for a full name */
p_fullname = Which(name);
if (!p_fullname) return false;
strcpy(fullname,p_fullname);
const char* extension = strrchr(fullname,'.');
__android_log_print(ANDROID_LOG_INFO, "dosbox", "command fullname:%s", fullname);
/*always disallow files without extension from being executed. */
/*only internal commands can be run this way and they never get in this handler */
if(extension == 0)
{
//Check if the result will fit in the parameters. Else abort
if(strlen(fullname) >( DOS_PATHLENGTH - 1) ) return false;
char temp_name[DOS_PATHLENGTH+4],* temp_fullname;
//try to add .com, .exe and .bat extensions to filename
strcpy(temp_name,fullname);
strcat(temp_name,".COM");
temp_fullname=Which(temp_name);
if (temp_fullname) { extension=".com";strcpy(fullname,temp_fullname); }
else
{
strcpy(temp_name,fullname);
strcat(temp_name,".EXE");
temp_fullname=Which(temp_name);
if (temp_fullname) { extension=".exe";strcpy(fullname,temp_fullname);}
else
{
strcpy(temp_name,fullname);
strcat(temp_name,".BAT");
temp_fullname=Which(temp_name);
if (temp_fullname) { extension=".bat";strcpy(fullname,temp_fullname);}
else
{
return false;
}
}
}
}
if (strcasecmp(extension, ".bat") == 0)
{ /* Run the .bat file */
/* delete old batch file if call is not active*/
bool temp_echo=echo; /*keep the current echostate (as delete bf might change it )*/
if(bf && !call) delete bf;
bf=new BatchFile(this,fullname,name,line);
echo=temp_echo; //restore it.
}
else
{ /* only .bat .exe .com extensions maybe be executed by the shell */
if(strcasecmp(extension, ".com") !=0)
{
if(strcasecmp(extension, ".exe") !=0) return false;
}
/* Run the .exe or .com file from the shell */
/* Allocate some stack space for tables in physical memory */
reg_sp-=0x200;
//Add Parameter block
DOS_ParamBlock block(SegPhys(ss)+reg_sp);
block.Clear();
//Add a filename
RealPt file_name=RealMakeSeg(ss,reg_sp+0x20);
MEM_BlockWrite(Real2Phys(file_name),fullname,(Bitu)(strlen(fullname)+1));
/* HACK: Store full commandline for mount and imgmount */
full_arguments.assign(line);
/* Fill the command line */
CommandTail cmdtail;
cmdtail.count = 0;
memset(&cmdtail.buffer,0,126); //Else some part of the string is unitialized (valgrind)
if (strlen(line)>126) line[126]=0;
cmdtail.count=(Bit8u)strlen(line);
memcpy(cmdtail.buffer,line,strlen(line));
cmdtail.buffer[strlen(line)]=0xd;
/* Copy command line in stack block too */
MEM_BlockWrite(SegPhys(ss)+reg_sp+0x100,&cmdtail,128);
/* Parse FCB (first two parameters) and put them into the current DOS_PSP */
Bit8u add;
FCB_Parsename(dos.psp(),0x5C,0x00,cmdtail.buffer,&add);
FCB_Parsename(dos.psp(),0x6C,0x00,&cmdtail.buffer[add],&add);
block.exec.fcb1=RealMake(dos.psp(),0x5C);
block.exec.fcb2=RealMake(dos.psp(),0x6C);
/* Set the command line in the block and save it */
block.exec.cmdtail=RealMakeSeg(ss,reg_sp+0x100);
block.SaveData();
#if 0
/* Save CS:IP to some point where i can return them from */
Bit32u oldeip=reg_eip;
Bit16u oldcs=SegValue(cs);
RealPt newcsip=CALLBACK_RealPointer(call_shellstop);
SegSet16(cs,RealSeg(newcsip));
reg_ip=RealOff(newcsip);
#endif
/* Start up a dos execute interrupt */
reg_ax=0x4b00;
//Filename pointer
SegSet16(ds,SegValue(ss));
reg_dx=RealOff(file_name);
//Paramblock
SegSet16(es,SegValue(ss));
reg_bx=reg_sp;
SETFLAGBIT(IF,false);
CALLBACK_RunRealInt(0x21);
/* Restore CS:IP and the stack */
reg_sp+=0x200;
#if 0
reg_eip=oldeip;
SegSet16(cs,oldcs);
#endif
}
return true; //Executable started
}
Bits CPU_Core_Dynrec_Run(void) {
for (;;) {
// Determine the linear address of CS:EIP
PhysPt ip_point=SegPhys(cs)+reg_eip;
#if C_HEAVY_DEBUG
if (DEBUG_HeavyIsBreakpoint()) return debugCallback;
#endif
CodePageHandlerDynRec * chandler=0;
// see if the current page is present and contains code
if (GCC_UNLIKELY(MakeCodePage(ip_point,chandler))) {
// page not present, throw the exception
CPU_Exception(cpu.exception.which,cpu.exception.error);
continue;
}
// page doesn't contain code or is special
if (GCC_UNLIKELY(!chandler)) return CPU_Core_Normal_Run();
// find correct Dynamic Block to run
CacheBlockDynRec * block=chandler->FindCacheBlock(ip_point&4095);
if (!block) {
// no block found, thus translate the instruction stream
// unless the instruction is known to be modified
if (!chandler->invalidation_map || (chandler->invalidation_map[ip_point&4095]<4)) {
// translate up to 32 instructions
block=CreateCacheBlock(chandler,ip_point,32);
} else {
// let the normal core handle this instruction to avoid zero-sized blocks
Bitu old_cycles=CPU_Cycles;
CPU_Cycles=1;
Bits nc_retcode=CPU_Core_Normal_Run();
if (!nc_retcode) {
CPU_Cycles=old_cycles-1;
continue;
}
CPU_CycleLeft+=old_cycles;
return nc_retcode;
}
}
run_block:
cache.block.running=0;
// now we're ready to run the dynamic code block
// BlockReturn ret=((BlockReturn (*)(void))(block->cache.start))();
BlockReturn ret=core_dynrec.runcode(block->cache.start);
switch (ret) {
case BR_Iret:
#if C_HEAVY_DEBUG
if (DEBUG_HeavyIsBreakpoint()) return debugCallback;
#endif
if (!GETFLAG(TF)) {
if (GETFLAG(IF) && PIC_IRQCheck) return CBRET_NONE;
break;
}
// trapflag is set, switch to the trap-aware decoder
cpudecoder=CPU_Core_Dynrec_Trap_Run;
return CBRET_NONE;
case BR_Normal:
// the block was exited due to a non-predictable control flow
// modifying instruction (like ret) or some nontrivial cpu state
// changing instruction (for example switch to/from pmode),
// or the maximal number of instructions to translate was reached
#if C_HEAVY_DEBUG
if (DEBUG_HeavyIsBreakpoint()) return debugCallback;
#endif
break;
case BR_Cycles:
// cycles went negative, return from the core to handle
// external events, schedule the pic...
#if C_HEAVY_DEBUG
if (DEBUG_HeavyIsBreakpoint()) return debugCallback;
#endif
return CBRET_NONE;
case BR_CallBack:
// the callback code is executed in dosbox.conf, return the callback number
FillFlags();
return core_dynrec.callback;
case BR_SMCBlock:
// LOG_MSG("selfmodification of running block at %x:%x",SegValue(cs),reg_eip);
cpu.exception.which=0;
// fallthrough, let the normal core handle the block-modifying instruction
case BR_Opcode:
// some instruction has been encountered that could not be translated
// (thus it is not part of the code block), the normal core will
// handle this instruction
CPU_CycleLeft+=CPU_Cycles;
CPU_Cycles=1;
return CPU_Core_Normal_Run();
#if (C_DEBUG)
case BR_OpcodeFull:
CPU_CycleLeft+=CPU_Cycles;
CPU_Cycles=1;
return CPU_Core_Full_Run();
#endif
case BR_Link1:
case BR_Link2:
block=LinkBlocks(ret);
if (block) goto run_block;
break;
default:
E_Exit("Invalid return code %d", ret);
}
}
return CBRET_NONE;
}
bool DOS_IOCTL(void)
{
Bitu handle = 0;
Bit8u drive = 0;
// calls 0-4,6,7,10,12,16 use a file handle
if ((reg_al < 4) || (reg_al == 0x06) || (reg_al == 0x07) || (reg_al == 0x0a) || (reg_al == 0x0c) || (reg_al == 0x10))
{
handle = RealHandle(reg_bx);
if (handle >= DOS_FILES || !Files[handle])
{
DOS_SetError(DOSERR_INVALID_HANDLE);
return false;
}
}
else if (reg_al < 0x12)
{ // those use a diskdrive except 0x0b
if (reg_al != 0x0b)
{
drive = reg_bl;
if (!drive)
drive = DOS_GetDefaultDrive();
else
drive--;
if (!((drive < DOS_DRIVES) && Drives[drive]))
{
DOS_SetError(DOSERR_INVALID_DRIVE);
return false;
}
}
}
else
{
LOG(LOG_DOSMISC, LOG_ERROR)("DOS:IOCTL Call %2X unhandled", reg_al);
DOS_SetError(DOSERR_FUNCTION_NUMBER_INVALID);
return false;
}
switch (reg_al)
{
case 0: // Get Device Information
if (Files[handle]->GetInformation() & 0x8000) // Check for device
reg_dx = Files[handle]->GetInformation();
else
{
Bit8u hdrive = Files[handle]->GetDrive();
if (hdrive == 0xff)
hdrive = 2; // defaulting to C:
// return drive number in lower 5 bits for block devices
reg_dx = (Files[handle]->GetInformation()&0xffe0)|hdrive;
}
reg_ax = reg_dx; // Destroyed officially
return true;
case 1: // Set Device Information
if (reg_dh != 0)
{
DOS_SetError(DOSERR_DATA_INVALID);
return false;
}
if (Files[handle]->GetInformation() & 0x8000) // Check for device
reg_al = (Bit8u)(Files[handle]->GetInformation() & 0xff);
else
{
DOS_SetError(DOSERR_FUNCTION_NUMBER_INVALID);
return false;
}
return true;
case 2: // Read from Device Control Channel
DOS_SetError(DOSERR_FUNCTION_NUMBER_INVALID);
return false;
case 3: // Write to Device Control Channel
DOS_SetError(DOSERR_FUNCTION_NUMBER_INVALID);
return false;
case 6: // Get Input Status
if (Files[handle]->GetInformation() & 0x8000) // Check for device
reg_al = (Files[handle]->GetInformation() & 0x40) ? 0 : 0xff;
else
{ // FILE
Bit32u oldlocation = 0;
Files[handle]->Seek(&oldlocation, DOS_SEEK_CUR);
Bit32u endlocation = 0;
Files[handle]->Seek(&endlocation, DOS_SEEK_END);
if (oldlocation < endlocation)
reg_al = 0xff; // Still data available
else
reg_al = 0; //EOF or beyond
Files[handle]->Seek(&oldlocation, DOS_SEEK_SET); // restore filelocation
}
return true;
case 7: // Get Output Status
reg_al = 0xff;
return true;
case 8: // Check if block device removable
reg_ax = 1;
return true;
case 9: // Check if block device remote
reg_dx = 0x0802; // Open/Close supported; 32bit access supported (any use? fixes Fable installer)
// undocumented bits from device attribute word
// TODO Set bit 9 on drives that don't support direct I/O
reg_ax = 0x300;
return true;
case 0x0A: // Is Device or Handle Remote?
reg_dx = 0; // No!
return true;
case 0x0B: // Set sharing retry count
return true;
case 0x0D: // Generic block device request
{
PhysPt ptr = SegPhys(ds)+reg_dx;
switch (reg_cl)
{
case 0x60: // Get Device parameters
vPC_rStosb(ptr, 3); // special function
vPC_rStosb(ptr+1, (drive>=2) ? 0x05 : 0x14); // fixed disc(5), 1.44 floppy(14)
vPC_rStosw(ptr+2, drive >= 2); // nonremovable ?
vPC_rStosw(ptr+4, 0); // num of cylinders
vPC_rStosb(ptr+6, 0); // media type (00=other type)
// drive parameter block following
vPC_rStosb(ptr+7, drive); // drive
vPC_rStosb(ptr+8, 0); // unit number
vPC_rStosd(ptr+0x1f, 0xffffffff); // next parameter block
break;
case 0x46:
case 0x66: // Volume label
{
char const* bufin = Drives[drive]->GetLabel();
char buffer[11] ={' '};
char const* find_ext = strchr(bufin,'.');
if (find_ext)
{
Bitu size = (Bitu)(find_ext-bufin);
if (size > 8)
size = 8;
memcpy(buffer, bufin,size);
find_ext++;
memcpy(buffer+size, find_ext, (strlen(find_ext)>3) ? 3 : strlen(find_ext));
}
else
memcpy(buffer,bufin, (strlen(bufin) > 8) ? 8 : strlen(bufin));
char buf2[8]={ 'F','A','T','1','6',' ',' ',' '};
if (drive < 2)
buf2[4] = '2'; // FAT12 for floppies
vPC_rStosw(ptr+0, 0); // 0
vPC_rStosd(ptr+2, 0x1234); // Serial number
vPC_rBlockWrite(ptr+6, buffer,11); // volumename
if (reg_cl == 0x66)
vPC_rBlockWrite(ptr+0x11, buf2, 8); // filesystem
}
break;
default :
LOG(LOG_IOCTL, LOG_ERROR)("DOS:IOCTL Call 0D:%2X Drive %2X unhandled", reg_cl, drive);
DOS_SetError(DOSERR_FUNCTION_NUMBER_INVALID);
return false;
}
return true;
}
case 0x0E: // Get Logical Drive Map
reg_al = 0; // Only 1 logical drive assigned
return true;
default:
LOG(LOG_DOSMISC, LOG_ERROR)("DOS:IOCTL Call %2X unhandled", reg_al);
DOS_SetError(DOSERR_FUNCTION_NUMBER_INVALID);
break;
}
return false;
}
static Bitu DOS_21Handler(void)
{
if (((reg_ah != 0x50) && (reg_ah != 0x51) && (reg_ah != 0x62) && (reg_ah != 0x64)) && (reg_ah < 0x6c))
if (dos.psp() != 0) // No program loaded yet?
{
DOS_PSP psp(dos.psp());
psp.SetStack(SegOff2dWord(SegValue(ss), reg_sp-18));
psp.FindFreeFileEntry();
}
char name1[DOSNAMEBUF+2+DOS_NAMELENGTH_ASCII];
char name2[DOSNAMEBUF+2+DOS_NAMELENGTH_ASCII];
switch (reg_ah)
{
case 0x00: // Terminate Program
DOS_Terminate(Mem_Lodsw(SegPhys(ss)+reg_sp+2), false, 0);
break;
case 0x01: // Read character from STDIN, with echo
{
Bit8u c;
Bit16u n = 1;
dos.echo = true;
DOS_ReadFile(STDIN, &c, &n);
reg_al = c;
dos.echo = false;
}
break;
case 0x02: // Write character to STDOUT
{
Bit8u c = reg_dl;
Bit16u n = 1;
DOS_WriteFile(STDOUT, &c, &n);
// Not in the official specs, but happens nonetheless. (last written character)
reg_al = c; // reg_al=(c==9)?0x20:c; //Officially: tab to spaces
}
break;
case 0x03: // Read character from STDAUX
{
Bit16u port = Mem_Lodsw(0x40, 0);
if (port != 0 && serialPorts[0])
serialPorts[0]->Getchar(®_al);
}
break;
case 0x04: // Write Character to STDAUX
{
Bit16u port = Mem_Lodsw(0x40, 0);
if (port != 0 && serialPorts[0])
serialPorts[0]->Putchar(reg_dl);
}
break;
case 0x05: // Write Character to PRINTER
parallelPorts[0]->Putchar(reg_dl);
break;
case 0x06: // Direct Console Output/Input
if (reg_dl == 0xff) // Input
{
// TODO Make this better according to standards
if (!DOS_GetSTDINStatus())
{
reg_al = 0;
CALLBACK_SZF(true);
break;
}
Bit8u c;
Bit16u n = 1;
DOS_ReadFile(STDIN, &c, &n);
reg_al = c;
CALLBACK_SZF(false);
}
else // Ouput
{
Bit8u c = reg_dl;
Bit16u n = 1;
DOS_WriteFile(STDOUT, &c, &n);
reg_al = reg_dl;
}
break;
case 0x07: // Character Input, without echo
case 0x08: // Direct Character Input, without echo (checks for breaks officially :)
{
Bit8u c;
Bit16u n = 1;
DOS_ReadFile (STDIN, &c, &n);
reg_al = c;
}
break;
case 0x09: // Write string to STDOUT
{
Bit8u c;
Bit16u n = 1;
PhysPt buf = SegPhys(ds)+reg_dx;
while ((c = Mem_Lodsb(buf++)) != '$')
DOS_WriteFile(STDOUT, &c, &n);
}
break;
case 0x0a: // Buffered Input
{
// TODO ADD Break checkin in STDIN but can't care that much for it
PhysPt data = SegPhys(ds)+reg_dx;
Bit8u free = Mem_Lodsb(data);
if (!free)
break;
Bit8u read = 0;
Bit8u c;
Bit16u n = 1;
for(;;)
{
DOS_ReadFile(STDIN, &c ,&n);
if (c == 8)
{ // Backspace
if (read)
{ // Something to backspace.
DOS_WriteFile(STDOUT, &c, &n); // STDOUT treats backspace as non-destructive.
c = ' ';
DOS_WriteFile(STDOUT, &c, &n);
c = 8;
DOS_WriteFile(STDOUT, &c, &n);
--read;
}
continue;
}
if (read >= free) // Keyboard buffer full
{
Beep(1750, 300);
continue;
}
DOS_WriteFile(STDOUT, &c, &n);
Mem_Stosb(data+read+2, c);
if (c == 13)
break;
read++;
}
Mem_Stosb(data+1, read);
}
break;
case 0x0b: // Get STDIN Status
reg_al = DOS_GetSTDINStatus() ? 0xff : 0x00;
break;
case 0x0c: // Flush Buffer and read STDIN call
{
Bit8u handle = RealHandle(STDIN);
if (handle != 0xFF && Files[handle] && Files[handle]->IsName("CON")) // flush buffer if STDIN is CON
{
Bit8u c;
Bit16u n;
while (DOS_GetSTDINStatus())
{
n = 1;
DOS_ReadFile(STDIN, &c, &n);
}
}
if (reg_al == 0x1 || reg_al == 0x6 || reg_al == 0x7 || reg_al == 0x8 || reg_al == 0xa)
{
Bit8u oldah = reg_ah;
reg_ah = reg_al;
DOS_21Handler();
reg_ah = oldah;
}
else
reg_al = 0;
}
break;
case 0x0d: // Disk Reset
break;
case 0x0e: // Select Default Drive
DOS_SetDefaultDrive(reg_dl);
reg_al = DOS_DRIVES;
break;
case 0x0f: // Open File using FCB
reg_al = DOS_FCBOpen(SegValue(ds), reg_dx) ? 0 : 0xFF;
break;
case 0x10: // Close File using FCB
reg_al = DOS_FCBClose(SegValue(ds), reg_dx) ? 0 : 0xFF;
break;
case 0x11: // Find First Matching File using FCB
reg_al = DOS_FCBFindFirst(SegValue(ds), reg_dx) ? 0 : 0xFF; // No test for C:\COMMAND.COM!
break;
case 0x12: // Find Next Matching File using FCB
reg_al = DOS_FCBFindNext(SegValue(ds), reg_dx) ? 0 : 0xFF;
break;
case 0x13: // Delete File using FCB
reg_al = DOS_FCBDeleteFile(SegValue(ds), reg_dx) ? 0 : 0xFF;
break;
case 0x14: // Sequential read from FCB
reg_al = DOS_FCBRead(SegValue(ds), reg_dx, 0);
break;
case 0x15: // Sequential write to FCB
reg_al = DOS_FCBWrite(SegValue(ds), reg_dx, 0);
break;
case 0x16: // Create or truncate file using FCB
reg_al = DOS_FCBCreate(SegValue(ds), reg_dx) ? 0 : 0xFF;
break;
case 0x17: // Rename file using FCB
reg_al = DOS_FCBRenameFile(SegValue(ds), reg_dx) ? 0 : 0xFF;
break;
case 0x1b: // Get allocation info for default drive
if (!DOS_GetAllocationInfo(0, ®_cx, ®_al, ®_dx))
reg_al = 0xFF;
break;
case 0x1c: // Get allocation info for specific drive
if (!DOS_GetAllocationInfo(reg_dl, ®_cx, ®_al, ®_dx))
reg_al = 0xFF;
break;
case 0x21: // Read random record from FCB
reg_al = DOS_FCBRandomRead(SegValue(ds), reg_dx, 1, true);
break;
case 0x22: // Write random record to FCB
reg_al = DOS_FCBRandomWrite(SegValue(ds), reg_dx, 1, true);
break;
case 0x23: // Get file size for FCB
reg_al = DOS_FCBGetFileSize(SegValue(ds), reg_dx) ? 0 : 0xFF;
break;
case 0x24: // Set Random Record number for FCB
DOS_FCBSetRandomRecord(SegValue(ds), reg_dx);
break;
case 0x27: // Random block read from FCB
reg_al = DOS_FCBRandomRead(SegValue(ds), reg_dx, reg_cx, false);
break;
case 0x28: // Random Block write to FCB
reg_al = DOS_FCBRandomWrite(SegValue(ds), reg_dx, reg_cx, false);
break;
case 0x29: // Parse filename into FCB
{
Bit8u difference;
char string[1024];
Mem_StrnCopyFrom(string, SegPhys(ds)+reg_si, 1023); // 1024 toasts the stack
reg_al = FCB_Parsename(SegValue(es), reg_di, reg_al, string, &difference);
reg_si += difference;
}
break;
case 0x19: // Get current default drive
reg_al = DOS_GetDefaultDrive();
break;
case 0x1a: // Set Disk Transfer Area Address
dos.dta(RealMakeSeg(ds, reg_dx));
break;
case 0x25: // Set Interrupt Vector
RealSetVec(reg_al, RealMakeSeg(ds, reg_dx));
break;
case 0x26: // Create new PSP
DOS_NewPSP(reg_dx, DOS_PSP(dos.psp()).GetSize());
break;
case 0x2a: // Get System Date
{
_SYSTEMTIME systime; // Return the Windows localdate
GetLocalTime(&systime);
reg_al = (Bit8u)systime.wDayOfWeek; // NB Sunday = 0, despite of MSDN documentation
reg_cx = systime.wYear;
reg_dx = (systime.wMonth<<8)+systime.wDay;
}
break;
case 0x2b: // Set System Date (we don't!)
reg_al = 0xff;
daysInMonth[2] = reg_cx&3 ? 28 : 29; // Year is from 1980 to 2099, it is this simple
if (reg_cx >= 1980 && reg_cx <= 2099)
if (reg_dh > 0 && reg_dh <= 12)
if (reg_dl > 0 && reg_dl <= daysInMonth[reg_dh])
reg_al = 0; // Date is valid, fake set
break;
case 0x2c: // Get System Time
{
_SYSTEMTIME systime; // Return the Windows localtime
GetLocalTime(&systime);
reg_cx = (systime.wHour<<8) + systime.wMinute;
reg_dx = (systime.wSecond<<8) + systime.wMilliseconds/10;
}
break;
case 0x2d: // Set System Time (we don't!)
if (reg_ch < 24 && reg_cl < 60 && reg_dh < 60 && reg_dl < 100)
reg_al = 0; // Time is valid, fake set
else
reg_al = 0xff;
break;
case 0x2e: // Set Verify flag
dos.verify = (reg_al == 1);
break;
case 0x2f: // Get Disk Transfer Area
SegSet16(es, RealSeg(dos.dta()));
reg_bx = RealOff(dos.dta());
break;
case 0x30: // Get DOS Version
if (reg_al == 0)
reg_bh = 0xFF; // Fake Microsoft DOS
else if (reg_al == 1)
reg_bh = 0; // DOS is NOT in HMA
reg_al = dos.version.major;
reg_ah = dos.version.minor;
reg_bl = 0; // Serialnumber
reg_cx = 0;
break;
case 0x31: // Terminate and stay resident
// Important: This service does not set the carry flag!
DOS_ResizeMemory(dos.psp(), ®_dx);
DOS_Terminate(dos.psp(), true, reg_al);
break;
case 0x1f: // Get drive parameter block for default drive
case 0x32: // Get drive parameter block for specific drive
{ // Officially a dpb should be returned as well. The disk detection part is implemented
Bit8u drive = reg_dl;
if (!drive || reg_ah == 0x1f)
drive = DOS_GetDefaultDrive();
else
drive--;
if (Drives[drive])
{
reg_al = 0;
SegSet16(ds, dos.tables.dpb);
reg_bx = drive; // Faking only the first entry (that is the driveletter)
}
else
reg_al = 0xff;
}
break;
case 0x33: // Extended Break Checking
switch (reg_al)
{
case 0: // Get the breakcheck flag
reg_dl = dos.breakcheck;
break;
case 1: // Set the breakcheck flag
dos.breakcheck = (reg_dl > 0);
break;
case 2:
{
bool old = dos.breakcheck;
dos.breakcheck = (reg_dl > 0);
reg_dl = old;
}
break;
case 3: // Get cpsw
case 4: // Set cpsw, both not used really
break;
case 5:
reg_dl = 3; // Boot drive = C:
break;
case 6: // Get true version number
reg_bx = (dos.version.minor<<8) + dos.version.major;
reg_dx = 0x1000; // Dos in ROM
break;
default:
reg_al = 0xff;
}
break;
case 0x34: // Get address of INDos Flag
SegSet16(es, DOS_SDA_SEG);
reg_bx = DOS_SDA_OFS + 0x01;
break;
case 0x35: // Get interrupt vector
reg_bx = Mem_Lodsw(0, ((Bit16u)reg_al)*4);
SegSet16(es, Mem_Lodsw(0, ((Bit16u)reg_al)*4+2));
break;
case 0x36: // Get Free Disk Space
{
Bit16u bytes, clusters, free;
Bit8u sectors;
if (DOS_GetFreeDiskSpace(reg_dl, &bytes, §ors, &clusters, &free))
{
reg_ax = sectors;
reg_bx = free;
reg_cx = bytes;
reg_dx = clusters;
}
else
reg_ax = 0xffff; // invalid drive specified
}
break;
case 0x37: // Get/Set Switch char Get/Set Availdev thing
switch (reg_al)
{
case 0:
reg_dl = 0x2f; // Always return '/' like dos 5.0+
break;
case 1:
reg_al = 0;
break;
case 2:
reg_al = 0;
reg_dl = 0x2f;
break;
case 3:
reg_al = 0;
break;
}
break;
case 0x38: // Get/set Country Code
if (reg_al == 0) // Get country specidic information
{
PhysPt dest = SegPhys(ds)+reg_dx;
Mem_CopyTo(dest, dos.tables.country, 0x18);
reg_ax = reg_bx = 1;
CALLBACK_SCF(false);
}
else // Set country code
CALLBACK_SCF(true);
break;
case 0x39: // MKDIR Create directory
Mem_StrnCopyFrom(name1, SegPhys(ds)+reg_dx, DOSNAMEBUF);
rSpTrim(name1);
if (DOS_MakeDir(name1))
{
reg_ax = 0xffff; // AX destroyed
CALLBACK_SCF(false);
}
else
{
reg_ax = dos.errorcode;
CALLBACK_SCF(true);
}
break;
case 0x3a: // RMDIR Remove directory
Mem_StrnCopyFrom(name1, SegPhys(ds)+reg_dx, DOSNAMEBUF);
rSpTrim(name1);
if (DOS_RemoveDir(name1))
{
reg_ax = 0xffff; // AX destroyed
CALLBACK_SCF(false);
}
else
{
reg_ax = dos.errorcode;
CALLBACK_SCF(true);
}
break;
case 0x3b: // CHDIR Set current directory
Mem_StrnCopyFrom(name1, SegPhys(ds)+reg_dx, DOSNAMEBUF);
rSpTrim(name1);
if (DOS_ChangeDir(name1))
{
reg_ax = 0xff00; // AX destroyed
CALLBACK_SCF(false);
}
else
{
reg_ax = dos.errorcode;
CALLBACK_SCF(true);
}
break;
case 0x3c: // CREATE Create or truncate file
Mem_StrnCopyFrom(name1, SegPhys(ds)+reg_dx, DOSNAMEBUF);
rSpTrim(name1);
if (DOS_CreateFile(name1, reg_cx, ®_ax))
CALLBACK_SCF(false);
else
{
reg_ax = dos.errorcode;
CALLBACK_SCF(true);
}
break;
case 0x3d: // OPEN Open existing file
{
Mem_StrnCopyFrom(name1, SegPhys(ds)+reg_dx, DOSNAMEBUF);
rSpTrim(name1);
if (DOS_OpenFile(name1, reg_al, ®_ax))
CALLBACK_SCF(false);
else
{
reg_ax = dos.errorcode;
CALLBACK_SCF(true);
}
break;
}
case 0x3e: // CLOSE Close file
if (DOS_CloseFile(reg_bx))
CALLBACK_SCF(false);
else
{
reg_ax = dos.errorcode;
CALLBACK_SCF(true);
}
break;
case 0x3f: // READ Read from file or device
{
Bit16u toread = reg_cx;
dos.echo = true;
if (DOS_ReadFile(reg_bx, dos_copybuf, &toread))
{
Mem_CopyTo(SegPhys(ds)+reg_dx, dos_copybuf, toread);
reg_ax = toread;
CALLBACK_SCF(false);
}
else
{
reg_ax = dos.errorcode;
CALLBACK_SCF(true);
}
dos.echo = false;
}
break;
case 0x40: // WRITE Write to file or device
{
Bit16u towrite = reg_cx;
Mem_CopyFrom(SegPhys(ds)+reg_dx, dos_copybuf, towrite);
if (DOS_WriteFile(reg_bx, dos_copybuf, &towrite))
{
reg_ax = towrite;
CALLBACK_SCF(false);
}
else
{
reg_ax = dos.errorcode;
CALLBACK_SCF(true);
}
}
break;
case 0x41: // UNLINK Delete file
Mem_StrnCopyFrom(name1, SegPhys(ds)+reg_dx, DOSNAMEBUF);
rSpTrim(name1);
if (DOS_UnlinkFile(name1))
CALLBACK_SCF(false);
else
{
reg_ax = dos.errorcode;
CALLBACK_SCF(true);
}
break;
case 0x42: // LSEEK Set current file position
{
Bit32u pos = (reg_cx<<16) + reg_dx;
if (DOS_SeekFile(reg_bx, &pos, reg_al))
{
reg_dx = (Bit16u)(pos >> 16);
reg_ax = (Bit16u)(pos & 0xFFFF);
CALLBACK_SCF(false);
}
else
{
reg_ax = dos.errorcode;
CALLBACK_SCF(true);
}
}
static bool DOS_MultiplexFunctions(void) {
char name[256];
switch (reg_ax) {
case 0x1216: /* GET ADDRESS OF SYSTEM FILE TABLE ENTRY */
// reg_bx is a system file table entry, should coincide with
// the file handle so just use that
LOG(LOG_DOSMISC,LOG_ERROR)("Some BAD filetable call used bx=%X",reg_bx);
if(reg_bx <= DOS_FILES) CALLBACK_SCF(false);
else CALLBACK_SCF(true);
if (reg_bx<16) {
RealPt sftrealpt=mem_readd(Real2Phys(dos_infoblock.GetPointer())+4);
PhysPt sftptr=Real2Phys(sftrealpt);
Bitu sftofs=0x06+reg_bx*0x3b;
if (Files[reg_bx]) mem_writeb(sftptr+sftofs,Files[reg_bx]->refCtr);
else mem_writeb(sftptr+sftofs,0);
if (!Files[reg_bx]) return true;
Bit32u handle=RealHandle(reg_bx);
if (handle>=DOS_FILES) {
mem_writew(sftptr+sftofs+0x02,0x02); // file open mode
mem_writeb(sftptr+sftofs+0x04,0x00); // file attribute
mem_writew(sftptr+sftofs+0x05,Files[reg_bx]->GetInformation()); // device info word
mem_writed(sftptr+sftofs+0x07,0); // device driver header
mem_writew(sftptr+sftofs+0x0d,0); // packed time
mem_writew(sftptr+sftofs+0x0f,0); // packed date
mem_writew(sftptr+sftofs+0x11,0); // size
mem_writew(sftptr+sftofs+0x15,0); // current position
} else {
Bit8u drive=Files[reg_bx]->GetDrive();
mem_writew(sftptr+sftofs+0x02,(Bit16u)(Files[reg_bx]->flags&3)); // file open mode
mem_writeb(sftptr+sftofs+0x04,(Bit8u)(Files[reg_bx]->attr)); // file attribute
mem_writew(sftptr+sftofs+0x05,0x40|drive); // device info word
mem_writed(sftptr+sftofs+0x07,RealMake(dos.tables.dpb,drive)); // dpb of the drive
mem_writew(sftptr+sftofs+0x0d,Files[reg_bx]->time); // packed file time
mem_writew(sftptr+sftofs+0x0f,Files[reg_bx]->date); // packed file date
Bit32u curpos=0;
Files[reg_bx]->Seek(&curpos,DOS_SEEK_CUR);
Bit32u endpos=0;
Files[reg_bx]->Seek(&endpos,DOS_SEEK_END);
mem_writed(sftptr+sftofs+0x11,endpos); // size
mem_writed(sftptr+sftofs+0x15,curpos); // current position
Files[reg_bx]->Seek(&curpos,DOS_SEEK_SET);
}
// fill in filename in fcb style
// (space-padded name (8 chars)+space-padded extension (3 chars))
const char* filename=(const char*)Files[reg_bx]->GetName();
if (strrchr(filename,'\\')) filename=strrchr(filename,'\\')+1;
if (strrchr(filename,'/')) filename=strrchr(filename,'/')+1;
if (!filename) return true;
const char* dotpos=strrchr(filename,'.');
if (dotpos) {
dotpos++;
size_t nlen=strlen(filename);
size_t extlen=strlen(dotpos);
Bits nmelen=(Bits)nlen-(Bits)extlen;
if (nmelen<1) return true;
nlen-=(extlen+1);
if (nlen>8) nlen=8;
size_t i;
for (i=0; i<nlen; i++)
mem_writeb((PhysPt)(sftptr+sftofs+0x20+i),filename[i]);
for (i=nlen; i<8; i++)
mem_writeb((PhysPt)(sftptr+sftofs+0x20+i),' ');
if (extlen>3) extlen=3;
for (i=0; i<extlen; i++)
mem_writeb((PhysPt)(sftptr+sftofs+0x28+i),dotpos[i]);
for (i=extlen; i<3; i++)
mem_writeb((PhysPt)(sftptr+sftofs+0x28+i),' ');
} else {
size_t i;
size_t nlen=strlen(filename);
if (nlen>8) nlen=8;
for (i=0; i<nlen; i++)
mem_writeb((PhysPt)(sftptr+sftofs+0x20+i),filename[i]);
for (i=nlen; i<11; i++)
mem_writeb((PhysPt)(sftptr+sftofs+0x20+i),' ');
}
SegSet16(es,RealSeg(sftrealpt));
reg_di=RealOff(sftrealpt+sftofs);
reg_ax=0xc000;
}
return true;
case 0x1607:
if (reg_bx == 0x15) {
switch (reg_cx) {
case 0x0000: // query instance
reg_cx = 0x0001;
reg_dx = 0x50; // dos driver segment
SegSet16(es,0x50); // patch table seg
reg_bx = 0x60; // patch table ofs
return true;
case 0x0001: // set patches
reg_ax = 0xb97c;
reg_bx = (reg_dx & 0x16);
reg_dx = 0xa2ab;
return true;
case 0x0003: // get size of data struc
if (reg_dx==0x0001) {
// CDS size requested
reg_ax = 0xb97c;
reg_dx = 0xa2ab;
reg_cx = 0x000e; // size
}
return true;
case 0x0004: // instanced data
reg_dx = 0; // none
return true;
case 0x0005: // get device driver size
reg_ax = 0;
reg_dx = 0;
return true;
default:
return false;
}
}
else if (reg_bx == 0x18) return true; // idle callout
else return false;
case 0x1680: /* RELEASE CURRENT VIRTUAL MACHINE TIME-SLICE */
//TODO Maybe do some idling but could screw up other systems :)
return true; //So no warning in the debugger anymore
case 0x1689: /* Kernel IDLE CALL */
case 0x168f: /* Close awareness crap */
/* Removing warning */
return true;
case 0x4a01: /* Query free hma space */
case 0x4a02: /* ALLOCATE HMA SPACE */
LOG(LOG_DOSMISC,LOG_WARN)("INT 2f:4a HMA. DOSBox reports none available.");
reg_bx=0; //number of bytes available in HMA or amount successfully allocated
//ESDI=ffff:ffff Location of HMA/Allocated memory
SegSet16(es,0xffff);
reg_di=0xffff;
return true;
case 0x1300:
case 0x1302:
reg_ax=0;
return true;
case 0x1605:
return true;
case 0x1612:
reg_ax=0;
name[0]=1;
name[1]=0;
MEM_BlockWrite(SegPhys(es)+reg_bx,name,0x20);
return true;
case 0x1613: /* Get SYSTEM.DAT path */
strcpy(name,"C:\\WINDOWS\\SYSTEM.DAT");
MEM_BlockWrite(SegPhys(es)+reg_di,name,(Bitu)(strlen(name)+1));
reg_ax=0;
reg_cx=strlen(name);
return true;
case 0x4a16: /* Open bootlog */
return true;
case 0x4a17: /* Write bootlog */
MEM_StrCopy(SegPhys(ds)+reg_dx,name,255);
LOG(LOG_DOSMISC,LOG_NORMAL)("BOOTLOG: %s\n",name);
return true;
case 0x4a33: /* Check MS-DOS Version 7 */
reg_ax=0;
return true;
}
return false;
}
