void EDA_DRAW_FRAME::UseGalCanvas()
{
KIGFX::GAL* gal = GetGalCanvas()->GetGAL();
// Set up grid settings
gal->SetGridVisibility( IsGridVisible() );
gal->SetGridSize( VECTOR2D( GetScreen()->GetGridSize() ) );
gal->SetGridOrigin( VECTOR2D( GetGridOrigin() ) );
// Transfer EDA_DRAW_PANEL settings
KIGFX::VIEW_CONTROLS* viewControls = GetGalCanvas()->GetViewControls();
viewControls->EnableCursorWarping( !m_canvas->GetEnableZoomNoCenter() );
viewControls->EnableMousewheelPan( m_canvas->GetEnableMousewheelPan() );
viewControls->EnableAutoPan( m_canvas->GetEnableAutoPan() );
m_canvas->SetEvtHandlerEnabled( false );
GetGalCanvas()->SetEvtHandlerEnabled( true );
GetGalCanvas()->StartDrawing();
// Switch panes
// JEY TODO: drop down to a single pane....
m_auimgr.GetPane( "DrawFrame" ).Show( false );
m_auimgr.GetPane( "DrawFrameGal" ).Show( true );
m_auimgr.Update();
// Reset current tool on switch();
SetNoToolSelected();
}
void LIB_EDIT_FRAME::OnExportBody( wxCommandEvent& aEvent )
{
m_toolManager->DeactivateTool();
SetToolID( ID_LIBEDIT_EXPORT_BODY_BUTT, GetGalCanvas()->GetDefaultCursor(), _( "Export" ) );
SaveOneSymbol();
SetNoToolSelected();
m_canvas->SetIgnoreMouseEvents( false );
}
void EDA_DRAW_FRAME::UseGalCanvas( bool aEnable )
{
KIGFX::VIEW* view = GetGalCanvas()->GetView();
KIGFX::GAL* gal = GetGalCanvas()->GetGAL();
// Display the same view after canvas switching
if( aEnable )
{
// Switch to GAL renderer from legacy
if( !m_galCanvasActive )
{
// Set up viewport
double zoomFactor = gal->GetWorldScale() / gal->GetZoomFactor();
double zoom = 1.0 / ( zoomFactor * m_canvas->GetZoom() );
view->SetScale( zoom );
view->SetCenter( VECTOR2D( m_canvas->GetScreenCenterLogicalPosition() ) );
}
// Set up grid settings
gal->SetGridVisibility( IsGridVisible() );
gal->SetGridSize( VECTOR2D( GetScreen()->GetGridSize() ) );
gal->SetGridOrigin( VECTOR2D( GetGridOrigin() ) );
// Transfer EDA_DRAW_PANEL settings
GetGalCanvas()->GetViewControls()->EnableCursorWarping( !m_canvas->GetEnableZoomNoCenter() );
GetGalCanvas()->GetViewControls()->EnableMousewheelPan( m_canvas->GetEnableMousewheelPan() );
GetGalCanvas()->GetViewControls()->EnableAutoPan( m_canvas->GetEnableAutoPan() );
}
else if( m_galCanvasActive )
{
// Switch to legacy renderer from GAL
double zoomFactor = gal->GetWorldScale() / gal->GetZoomFactor();
// TODO replace it with EDA_DRAW_PANEL_GAL::GetLegacyZoom
m_canvas->SetZoom( 1.0 / ( zoomFactor * view->GetScale() ) );
VECTOR2D center = view->GetCenter();
AdjustScrollBars( wxPoint( center.x, center.y ) );
}
m_canvas->SetEvtHandlerEnabled( !aEnable );
GetGalCanvas()->SetEvtHandlerEnabled( aEnable );
// Switch panes
m_auimgr.GetPane( wxT( "DrawFrame" ) ).Show( !aEnable );
m_auimgr.GetPane( wxT( "DrawFrameGal" ) ).Show( aEnable );
m_auimgr.Update();
// Reset current tool on switch();
SetNoToolSelected();
m_galCanvasActive = aEnable;
}
void LIB_EDIT_FRAME::OnLeftClick( wxDC* DC, const wxPoint& aPosition )
{
LIB_ITEM* item = GetDrawItem();
bool item_in_edit = item && item->InEditMode();
bool no_item_edited = !item_in_edit;
LIB_PART* part = GetCurPart();
if( !part ) // No component loaded !
return;
if( ( GetToolId() == ID_NO_TOOL_SELECTED ) && no_item_edited )
{
item = LocateItemUsingCursor( aPosition );
if( item )
{
MSG_PANEL_ITEMS items;
item->GetMsgPanelInfo( items );
SetMsgPanel( items );
}
else
{
DisplayCmpDoc();
if( m_canvas->GetAbortRequest() )
m_canvas->SetAbortRequest( false );
}
}
switch( GetToolId() )
{
case ID_ZOOM_SELECTION:
break;
case ID_NO_TOOL_SELECTED:
// If an item is currently in edit, finish edit
if( item_in_edit )
{
switch( item->Type() )
{
case LIB_PIN_T:
PlacePin();
break;
default:
EndDrawGraphicItem( DC );
break;
}
}
break;
case ID_LIBEDIT_PIN_BUTT:
if( no_item_edited )
CreatePin( DC );
else
PlacePin();
break;
case ID_LIBEDIT_BODY_LINE_BUTT:
case ID_LIBEDIT_BODY_ARC_BUTT:
case ID_LIBEDIT_BODY_CIRCLE_BUTT:
case ID_LIBEDIT_BODY_RECT_BUTT:
case ID_LIBEDIT_BODY_TEXT_BUTT:
if( no_item_edited )
SetDrawItem( CreateGraphicItem( part, DC ) );
else if( item )
{
if( item->IsNew() )
GraphicItemBeginDraw( DC );
else
EndDrawGraphicItem( DC );
}
break;
case ID_LIBEDIT_DELETE_ITEM_BUTT:
item = LocateItemUsingCursor( aPosition );
if( item )
{
deleteItem( DC, item );
}
else
{
DisplayCmpDoc();
if( m_canvas->GetAbortRequest() )
m_canvas->SetAbortRequest( false );
}
break;
case ID_LIBEDIT_ANCHOR_ITEM_BUTT:
SaveCopyInUndoList( part );
PlaceAnchor();
SetNoToolSelected();
break;
default:
wxFAIL_MSG( wxString::Format( wxT( "Unhandled command ID %d" ), GetToolId() ) );
SetNoToolSelected();
break;
}
}
/* Handles the selection of tools, menu, and popup menu commands.
*/
void PL_EDITOR_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
int idx;
wxString msg;
WORKSHEET_LAYOUT& pglayout = WORKSHEET_LAYOUT::GetTheInstance();
WORKSHEET_DATAITEM* item = NULL;
wxCommandEvent cmd( wxEVT_COMMAND_MENU_SELECTED );
cmd.SetEventObject( this );
switch( id )
{
case ID_NO_TOOL_SELECTED:
SetNoToolSelected();
break;
case ID_MENU_ZOOM_SELECTION:
case ID_ZOOM_SELECTION:
// This tool is located on the main toolbar: switch it on or off on click
if( GetToolId() != ID_ZOOM_SELECTION )
SetToolID( ID_ZOOM_SELECTION, wxCURSOR_MAGNIFIER, _( "Zoom to selection" ) );
else
SetNoToolSelected();
break;
case ID_SELECT_PAGE_NUMBER:
m_canvas->Refresh();
break;
case ID_SHEET_SET:
{
DIALOG_PAGES_SETTINGS dlg( this );
dlg.SetWksFileName( GetCurrFileName() );
dlg.EnableWksFileNamePicker( false );
dlg.ShowModal();
cmd.SetId( ID_ZOOM_PAGE );
wxPostEvent( this, cmd );
}
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
if( m_canvas->IsMouseCaptured() )
{
m_canvas->EndMouseCapture();
SetToolID( GetToolId(), m_canvas->GetCurrentCursor(), wxEmptyString );
}
else
{
SetNoToolSelected();
}
break;
case ID_POPUP_DESIGN_TREE_ITEM_DELETE:
case ID_POPUP_ITEM_DELETE:
case wxID_CUT:
// Delete item, and select the previous item
item = m_treePagelayout->GetPageLayoutSelectedItem();
if( item == NULL )
break;
SaveCopyInUndoList();
idx = pglayout.GetItemIndex( item );
pglayout.Remove( item );
RebuildDesignTree();
if( id == ID_POPUP_DESIGN_TREE_ITEM_DELETE )
{
item = pglayout.GetItem( (unsigned) (idx-1) );
if( item )
m_treePagelayout->SelectCell( item );
}
item = NULL;
OnModify();
m_canvas->Refresh();
break;
case ID_POPUP_ITEM_ADD_LINE:
SaveCopyInUndoList();
idx = m_treePagelayout->GetSelectedItemIndex();
item = AddPageLayoutItem( WORKSHEET_DATAITEM::WS_SEGMENT, idx );
if( InvokeDialogNewItem( this, item ) == wxID_CANCEL )
{
RemoveLastCommandInUndoList();
pglayout.Remove( item );
RebuildDesignTree();
item = NULL;
}
else
{
// Put the new item in move mode, after putting the cursor
// on the start point:
wxPoint position = item->GetStartPosUi();
SetCrossHairPosition( position, false );
position = GetCrossHairPosition();
if( m_canvas->IsPointOnDisplay( position ) )
m_canvas->MoveCursorToCrossHair();
else
RedrawScreen( position, true );
item->SetFlags( NEW_ITEM );
MoveItem( item );
}
break;
case ID_POPUP_ITEM_ADD_RECT:
SaveCopyInUndoList();
idx = m_treePagelayout->GetSelectedItemIndex();
item = AddPageLayoutItem( WORKSHEET_DATAITEM::WS_RECT, idx );
if( InvokeDialogNewItem( this, item ) == wxID_CANCEL )
{
RemoveLastCommandInUndoList();
pglayout.Remove( item );
RebuildDesignTree();
item = NULL;
}
else
{
// Put the new item in move mode, after putting the cursor
// on the start point:
wxPoint position = item->GetStartPosUi();
SetCrossHairPosition( position, false );
position = GetCrossHairPosition();
if( m_canvas->IsPointOnDisplay( position ) )
m_canvas->MoveCursorToCrossHair();
else
RedrawScreen( position, true );
item->SetFlags( NEW_ITEM );
MoveItem( item );
}
break;
case ID_POPUP_ITEM_ADD_TEXT:
SaveCopyInUndoList();
idx = m_treePagelayout->GetSelectedItemIndex();
item = AddPageLayoutItem( WORKSHEET_DATAITEM::WS_TEXT, idx );
if( InvokeDialogNewItem( this, item ) == wxID_CANCEL )
{
RemoveLastCommandInUndoList();
pglayout.Remove( item );
RebuildDesignTree();
item = NULL;
}
else
{
// Put the new text in move mode:
item->SetFlags( NEW_ITEM | LOCATE_STARTPOINT );
MoveItem( item );
}
break;
case ID_POPUP_ITEM_ADD_BITMAP:
SaveCopyInUndoList();
idx = m_treePagelayout->GetSelectedItemIndex();
item = AddPageLayoutItem( WORKSHEET_DATAITEM::WS_BITMAP, idx );
if( item && InvokeDialogNewItem( this, item ) == wxID_CANCEL )
{
RemoveLastCommandInUndoList();
pglayout.Remove( item );
RebuildDesignTree();
item = NULL;
}
if( item )
{
// Put the new text in move mode:
item->SetFlags( NEW_ITEM | LOCATE_STARTPOINT );
MoveItem( item );
}
break;
case ID_POPUP_ITEM_APPEND_PAGE_LAYOUT:
cmd.SetId( ID_APPEND_DESCR_FILE );
wxPostEvent( this, cmd );
break;
case ID_POPUP_ITEM_PLACE:
item = GetScreen()->GetCurItem();
PlaceItem( item );
break;
case ID_POPUP_ITEM_PLACE_CANCEL:
if( m_canvas->IsMouseCaptured() )
m_canvas->EndMouseCapture();
break;
case ID_POPUP_ITEM_MOVE_START_POINT:
item = m_treePagelayout->GetPageLayoutSelectedItem();
// Ensure flags are properly set
item->ClearFlags( LOCATE_ENDPOINT );
item->SetFlags( LOCATE_STARTPOINT );
MoveItem( item );
break;
case ID_POPUP_ITEM_MOVE_END_POINT:
item = m_treePagelayout->GetPageLayoutSelectedItem();
// Ensure flags are properly set
item->ClearFlags( LOCATE_STARTPOINT );
item->SetFlags( LOCATE_ENDPOINT );
MoveItem( item );
break;
case ID_POPUP_ITEM_MOVE:
item = m_treePagelayout->GetPageLayoutSelectedItem();
item->ClearFlags( LOCATE_ENDPOINT|LOCATE_STARTPOINT );
MoveItem( item );
break;
default:
wxMessageBox( wxT( "PL_EDITOR_FRAME::Process_Special_Functions error" ) );
break;
}
if( item )
{
OnModify();
m_propertiesPagelayout->CopyPrmsFromItemToPanel( item );
m_treePagelayout->SelectCell( item );
}
}
