MainFrame::MainFrame(void):QMainWindow(0)
{
setupUi(this);
displayMode = AIS_DisplayMode::AIS_WireFrame;
this->setWindowIconText("AsmPlan");
myViewer = new Viewer(this);
myViewer->setFocus();
setCentralWidget(myViewer);
connect(actionEXIT, SIGNAL(triggered()),this,SLOT(Exit()));
connect(actionSTEP, SIGNAL(triggered()),this,SLOT(ImportStep()));
connect(actionABOUT, SIGNAL(triggered()),this,SLOT(about()));
connect(actionSTEPBack, SIGNAL(triggered()),this,SLOT(StepBack()));
connect(actionPlayBack, SIGNAL(triggered()),this,SLOT(PlayBack()));
connect(actionStop, SIGNAL(triggered()),this,SLOT(Stop()));
connect(actionNextStep, SIGNAL(triggered()),this,SLOT(NextStep()));
connect(actionPlayFoward, SIGNAL(triggered()),this,SLOT(PlayFoward()));
connect(actionFoto, SIGNAL(triggered()),this,SLOT(ExportPhoto()));
connect(actionDBGShow, SIGNAL(triggered()),this,SLOT(DBGShow()));
connect(myViewer, SIGNAL(contextMenuSignal(const QPoint &)), this, SLOT(contextMenu(const QPoint &)));
connect(actionViewMode, SIGNAL(triggered()), this, SLOT(ViewModeChanged()));
connect(action_AssemlyInfoRequest, SIGNAL(triggered()), this, SLOT(ShowAssemblyInfo()));
connect(action_SetFrameDisplayMode, SIGNAL(triggered()), this, SLOT(SetWireFrameMode()));
connect(action_SetShadedDisplayMode, SIGNAL(triggered()), this, SLOT(SetShadedMode()));
connect(action_ShowFullProduct, SIGNAL(triggered()), this, SLOT(ShowFullProduct()));
connect(action_HideDisassembled, SIGNAL(triggered()), this, SLOT(HideDisaasembledPart()));
//Test panel functions
connect(action_ContactTest, SIGNAL(triggered()), this, SLOT(TestContactSpotVerbose()));
connect(action_PointOnFace, SIGNAL(triggered()), this, SLOT(TestPointOnPart()));
connect(action_FaceTrait, SIGNAL(triggered()), this, SLOT(TestSpartialDesc()));
connect(action_PartIso, SIGNAL(triggered()), this, SLOT(TestIsoFaceForPart()));
connect(action_DBGTime, SIGNAL(triggered()), this, SLOT(TestDBGTime()));
connect(actionPartGraph, SIGNAL(triggered()), this, SLOT(PartGraph()));
connect(actionBodyDescriptor, SIGNAL(triggered()), this, SLOT(TestBodyDescriptor()));
connect(action_VoxelGeneration, SIGNAL(triggered()), this, SLOT(TestVoxelGeneration()));
}
//
// TBuf::NextToken
//
// Reads the next token into 'dest'. Skips any preceeding spaces,
// stopping when either a space, a punctuation char, or end of data
// occurs. Generates an error if token exceeds max token length.
//
// Returns :
//
// TR_OK - if token was read with no problems
// TR_PUN - if punctuation char was found
// TR_EOF - if end of data reached
//
TBufResult TBuf::NextToken()
{
ASSERT(setup);
U8 c;
U32 tokenLen = 0;
char *sPtr;
// Have we peeked at the next token
if (peekState == PS_ON)
{
peekState = PS_OFF;
Utils::Strcpy(prevToken, lastToken);
Utils::Strcpy(lastToken, peekToken);
return (peekVal);
}
// Setup peek operation
if (peekState == PS_PRE)
{
// Store next token in peek buffer
sPtr = peekToken;
// We are now in peek mode
peekState = PS_ON;
}
else
{
// Save previous token
Utils::Strcpy(prevToken, lastToken);
// Store next token in last token buffer
sPtr = lastToken;
}
// Clear token buffer
*sPtr = '\0';
// Read next token
for (;;)
{
// Have we reached the end of the data
if (!NextChar(&c))
{
// Return token if we have one
return (tokenLen ? TR_OK : TR_EOF);
}
// Finish reading constant
if (constantOn && c == constantChar)
{
constantOn = FALSE;
}
// Ignore these checks if reading a constant
if (!constantOn)
{
// What char have we got
if ((c == TBUF_CH_SPACE) || (c == TBUF_CH_EOL))
{
// Have we read a token
if (tokenLen)
{
return (TR_OK);
}
// Ignore this character
continue;
}
// Check for punctuation
if (CharType(c) == PUNCTUATION)
{
// Haven't read anything yet
if (!tokenLen)
{
sPtr[0] = c;
sPtr[1] = '\0';
return(TR_PUN);
}
// Successfully read a token
StepBack();
return(TR_OK);
}
}
// Add this char to the current token
if (tokenLen < TBUF_MAX_TOKEN - 1)
{
sPtr[tokenLen++] = c;
sPtr[tokenLen] = '\0';
}
else
{
TokenError("maximum token length [%d bytes] exceeded", TBUF_MAX_TOKEN-1);
}
}
}
QmitkActiveSurfaceToolGUI::QmitkActiveSurfaceToolGUI()
:QmitkToolGUI()
{
//std::cout << "hi from " << __FUNCSIG__ << std::endl;
// create the visible widgets
QBoxLayout* verticalLayout = new QVBoxLayout( this );
m_HorizontalLayout = new QHBoxLayout();
verticalLayout->addLayout(m_HorizontalLayout);
m_HorizontalLayout1 = new QHBoxLayout();
verticalLayout->addLayout(m_HorizontalLayout1);
m_HorizontalLayout2 = new QHBoxLayout();
verticalLayout->addLayout(m_HorizontalLayout2);
m_SelectSurfaceBox = new QComboBox();
m_HorizontalLayout->addWidget(m_SelectSurfaceBox);
connect(m_SelectSurfaceBox, SIGNAL(activated(int)), this, SLOT(SelectSurface(int)));
m_PbtnSelectSurfaceViaMouse = new QPushButton();
QIcon icn_OpenFile;
icn_OpenFile.addFile(":/threeDEditing/res/threeDEditing/mousepointer.png");
m_PbtnSelectSurfaceViaMouse->setIcon(icn_OpenFile);
m_PbtnSelectSurfaceViaMouse->setFixedSize(22,22);
m_HorizontalLayout->addWidget(m_PbtnSelectSurfaceViaMouse);
connect(m_PbtnSelectSurfaceViaMouse, SIGNAL(clicked()), this, SLOT(SelectSurfaceViaMouse()));
m_PbtnReinitSelection = new QPushButton();
m_PbtnReinitSelection->setText("Reinit Selection");
m_PbtnReinitSelection->setCheckable(true);
m_HorizontalLayout1->addWidget(m_PbtnReinitSelection);
connect(m_PbtnReinitSelection, SIGNAL(clicked()), this, SLOT(ReinitSelection()));
m_PbtnJumpToPosition = new QPushButton();
m_PbtnJumpToPosition->setText("Jump to Position");
m_PbtnJumpToPosition->setCheckable(true);
m_HorizontalLayout1->addWidget(m_PbtnJumpToPosition);
connect(m_PbtnJumpToPosition, SIGNAL(clicked()), this, SLOT(JumpToPosition()));
QLabel* label = new QLabel( "Radius", this );
QFont f = label->font();
f.setBold(false);
label->setFont( f );
m_HorizontalLayout2->addWidget(label);
m_RadiusSlider = new QSlider(Qt::Horizontal);
m_RadiusSlider->setSliderPosition(20);
m_HorizontalLayout2->addWidget(m_RadiusSlider);
QObject::connect(m_RadiusSlider, SIGNAL(sliderMoved(int)), this, SLOT(RadiusChanged(int)));
// Tool Specific
QBoxLayout* horizontalLayout3 = new QHBoxLayout();
verticalLayout->addLayout(horizontalLayout3);
QBoxLayout* horizontalLayout4 = new QHBoxLayout();
verticalLayout->addLayout(horizontalLayout4);
QBoxLayout* horizontalLayout5 = new QHBoxLayout();
verticalLayout->addLayout(horizontalLayout5);
QBoxLayout* horizontalLayout6 = new QHBoxLayout();
verticalLayout->addLayout(horizontalLayout6);
QBoxLayout* horizontalLayout7 = new QHBoxLayout();
verticalLayout->addLayout(horizontalLayout7);
QBoxLayout* horizontalLayout8 = new QHBoxLayout();
verticalLayout->addLayout(horizontalLayout8);
QBoxLayout* horizontalLayout9 = new QHBoxLayout();
verticalLayout->addLayout(horizontalLayout9);
QBoxLayout* horizontalLayout10 = new QHBoxLayout();
verticalLayout->addLayout(horizontalLayout10);
QBoxLayout* horizontalLayout11 = new QHBoxLayout();
verticalLayout->addLayout(horizontalLayout11);
QBoxLayout* horizontalLayout12 = new QHBoxLayout();
verticalLayout->addLayout(horizontalLayout12);
QBoxLayout* horizontalLayout13 = new QHBoxLayout();
verticalLayout->addLayout(horizontalLayout13);
QBoxLayout* horizontalLayout14 = new QHBoxLayout();
verticalLayout->addLayout(horizontalLayout14);
QFrame *frame = new QFrame( this );
frame->setFrameStyle( QFrame::Box | QFrame::Plain );
frame->setLineWidth(10);
frame->setFixedSize(200,10);
QColor color(214,247,202);
QPalette colorPalette(color);
colorPalette.setColor(QPalette::Foreground, color);
frame->setPalette(colorPalette);
horizontalLayout3->addWidget(frame);
QLabel* label2 = new QLabel( "Select feature image:", this );
QFont f2 = label2->font();
f2.setBold(false);
label2->setFont( f2 );
horizontalLayout4->addWidget(label2);
m_SelectImageBox = new QComboBox();
horizontalLayout5->addWidget(m_SelectImageBox);
connect(m_SelectImageBox, SIGNAL(activated(int)), this, SLOT(SelectImage(int)));
QLabel* label3 = new QLabel( "Set seed point bubble\n(left click):\nRemove bubble\n(shift + left click)", this );
QFont f3 = label3->font();
f3.setPointSize(7);
f3.setBold(false);
label3->setFont( f3 );
horizontalLayout6->addWidget(label3);
QPushButton* pbtn_RemoveBubble = new QPushButton();
pbtn_RemoveBubble->setText("Remove Bubble");
horizontalLayout6->addWidget(pbtn_RemoveBubble);
connect(pbtn_RemoveBubble, SIGNAL(clicked()), this, SLOT(RemoveBubble()));
m_VCR = new std::vector<QPushButton*>;
int size = 24;
QPushButton* pbtn_Stop = new QPushButton();
QIcon icn_Stop;
icn_Stop.addFile(":/threeDEditing/res/threeDEditing/Backward_01.png");
pbtn_Stop->setIcon(icn_Stop);
pbtn_Stop->setIconSize(QSize(size,size));
horizontalLayout7->addWidget(pbtn_Stop);
connect(pbtn_Stop, SIGNAL(clicked()), this, SLOT(Stop()));
QPushButton* pbtn_StepBack = new QPushButton();
QIcon icn_StepBack;
icn_StepBack.addFile(":/threeDEditing/res/threeDEditing/left.png");
pbtn_StepBack->setIcon(icn_StepBack);
pbtn_StepBack->setIconSize(QSize(size,size));
horizontalLayout7->addWidget(pbtn_StepBack);
connect(pbtn_StepBack, SIGNAL(clicked()), this, SLOT(StepBack()));
QPushButton* pbtn_ReversePlay = new QPushButton();
m_VCR->push_back(pbtn_ReversePlay);
QIcon icn_ReversePlay;
icn_ReversePlay.addFile(":/threeDEditing/res/threeDEditing/Backward.png");
pbtn_ReversePlay->setIcon(icn_ReversePlay);
pbtn_ReversePlay->setCheckable(true);
pbtn_ReversePlay->setIconSize(QSize(size,size));
horizontalLayout7->addWidget(pbtn_ReversePlay);
connect(pbtn_ReversePlay, SIGNAL(clicked()), this, SLOT(ReversePlay()));
QPushButton* pbtn_Pause = new QPushButton();
m_VCR->push_back(pbtn_Pause);
QIcon icn_Pause;
icn_Pause.addFile(":/threeDEditing/res/threeDEditing/pause.png");
pbtn_Pause->setIcon(icn_Pause);
pbtn_Pause->setCheckable(true);
pbtn_Pause->setChecked(true);
pbtn_Pause->setIconSize(QSize(size,size));
horizontalLayout7->addWidget(pbtn_Pause);
connect(pbtn_Pause, SIGNAL(clicked()), this, SLOT(Pause()));
QPushButton* pbtn_Play = new QPushButton();
m_VCR->push_back(pbtn_Play);
QIcon icn_Play;
icn_Play.addFile(":/threeDEditing/res/threeDEditing/Forward.png");
pbtn_Play->setIcon(icn_Play);
pbtn_Play->setCheckable(true);
pbtn_Play->setIconSize(QSize(size,size));
horizontalLayout7->addWidget(pbtn_Play);
connect(pbtn_Play, SIGNAL(clicked()), this, SLOT(Play()));
QPushButton* pbtn_StepForward = new QPushButton();
QIcon icn_StepForward;
icn_StepForward.addFile(":/threeDEditing/res/threeDEditing/right.png");
pbtn_StepForward->setIcon(icn_StepForward);
pbtn_StepForward->setIconSize(QSize(size,size));
horizontalLayout7->addWidget(pbtn_StepForward);
connect(pbtn_StepForward, SIGNAL(clicked()), this, SLOT(StepForward()));
QLabel* label5 = new QLabel( "Step size:", this );
QFont f5 = label5->font();
f5.setBold(false);
label5->setFont( f5 );
horizontalLayout8->addWidget(label5);
QSpinBox* selectStepSize = new QSpinBox();
selectStepSize->setRange(1, 50);
selectStepSize->setValue(1);
horizontalLayout8->addWidget(selectStepSize);
connect(selectStepSize, SIGNAL(valueChanged(int)), this, SLOT(SelectStepSize(int)));
QLabel* label6 = new QLabel( "Iteration:", this );
QFont f6 = label6->font();
f6.setBold(false);
label6->setFont( f6 );
horizontalLayout8->addWidget(label6);
numberOfIterations = new QLineEdit(this);
numberOfIterations->setText("0");
numberOfIterations->setReadOnly(true);
horizontalLayout8->addWidget(numberOfIterations);
QFrame *frame1 = new QFrame( this );
frame1->setFrameStyle( QFrame::Box | QFrame::Plain );
frame1->setLineWidth(10);
frame1->setFixedSize(200,10);
frame1->setPalette(colorPalette);
horizontalLayout9->addWidget(frame1);
// Parameters
QLabel* label7 = new QLabel( "Parameters:", this );
QFont f7 = label7->font();
f7.setBold(true);
label7->setFont( f7 );
horizontalLayout10->addWidget(label7);
// make the "InputMask" for values between 1.11 and 17.93 with 2 digits after the comma
QValidator *inputRange = new QDoubleValidator(0.000, 100000.000, 3, this);
// table layout
QBoxLayout* verticalLayout1 = new QVBoxLayout();
horizontalLayout11->addLayout(verticalLayout1);
QBoxLayout* verticalLayout2 = new QVBoxLayout();
horizontalLayout11->addLayout(verticalLayout2);
QBoxLayout* verticalLayout3 = new QVBoxLayout();
horizontalLayout11->addLayout(verticalLayout3);
QLabel* label8 = new QLabel( "Curvature\nForce:", this );
QFont f8 = label8->font();
f8.setBold(false);
f8.setPointSize(7);
label8->setFont( f8 );
verticalLayout1->addWidget(label8);
m_CurvatureForce = new QLineEdit(this);
m_CurvatureForce->setText("0");
m_CurvatureForce->setReadOnly(false);
m_CurvatureForce->setValidator(inputRange);
QObject::connect(m_CurvatureForce, SIGNAL(returnPressed()), this, SLOT(EditedCurvatureForce()));
verticalLayout2->addWidget(m_CurvatureForce);
QmitkCrossWidget* curvatureForceCross = new QmitkCrossWidget();
QPixmap pixCurvatureForce(":/threeDEditing/res/threeDEditing/CrossArrow.png");
curvatureForceCross->setPixmap(pixCurvatureForce.scaledToWidth(100));
curvatureForceCross->setFixedSize(100,20);
curvatureForceCross->setToolTip("Drag with a left mouse click from the center circle to the sides.");
verticalLayout3->addWidget(curvatureForceCross);
connect( curvatureForceCross, SIGNAL( SignalDeltaMove( int, int ) ), this, SLOT( CurvatureForceCross( int, int ) ) );
QLabel* label10 = new QLabel( "Area\nForce:", this );
QFont f10 = label10->font();
f10.setBold(false);
f10.setPointSize(7);
label10->setFont( f10 );
verticalLayout1->addWidget(label10);
m_AreaForce = new QLineEdit(this);
m_AreaForce->setText("0");
m_AreaForce->setReadOnly(false);
m_AreaForce->setValidator(inputRange);
QObject::connect(m_AreaForce, SIGNAL(returnPressed()), this, SLOT(EditedAreaForce()));
verticalLayout2->addWidget(m_AreaForce);
QmitkCrossWidget* areaForceCross = new QmitkCrossWidget();
QPixmap pixAreaForce(":/threeDEditing/res/threeDEditing/CrossArrow.png");
areaForceCross->setPixmap(pixAreaForce.scaledToWidth(100));
areaForceCross->setFixedSize(100,20);
areaForceCross->setToolTip("Drag with a left mouse click from the center circle to the sides.");
verticalLayout3->addWidget(areaForceCross);
connect( areaForceCross, SIGNAL( SignalDeltaMove( int, int ) ), this, SLOT( AreaForceCross( int, int ) ) );
QLabel* label11 = new QLabel( "Volume\nForce:", this );
QFont f11 = label11->font();
f11.setBold(false);
f11.setPointSize(7);
label11->setFont( f11 );
verticalLayout1->addWidget(label11);
m_VolumeForce = new QLineEdit(this);
m_VolumeForce->setText("0");
m_VolumeForce->setReadOnly(false);
m_VolumeForce->setValidator(inputRange);
QObject::connect(m_VolumeForce, SIGNAL(returnPressed()), this, SLOT(EditedVolumeForce()));
verticalLayout2->addWidget(m_VolumeForce);
QmitkCrossWidget* volumeForceCross = new QmitkCrossWidget();
QPixmap pixVolumeForce(":/threeDEditing/res/threeDEditing/CrossArrow.png");
volumeForceCross->setPixmap(pixVolumeForce.scaledToWidth(100));
volumeForceCross->setFixedSize(100,20);
volumeForceCross->setToolTip("Drag with a left mouse click from the center circle to the sides.");
verticalLayout3->addWidget(volumeForceCross);
connect( volumeForceCross, SIGNAL( SignalDeltaMove( int, int ) ), this, SLOT( VolumeForceCross( int, int ) ) );
QFrame *frame2 = new QFrame( this );
frame2->setFrameStyle( QFrame::Box | QFrame::Plain );
frame2->setLineWidth(10);
frame2->setFixedSize(200,10);
frame2->setPalette(colorPalette);
horizontalLayout12->addWidget(frame2);
QPushButton* pbtnClosing = new QPushButton();
pbtnClosing->setText("Closing by one pixel");
pbtnClosing->setCheckable(true);
horizontalLayout13->addWidget(pbtnClosing);
connect(pbtnClosing, SIGNAL(clicked()), this, SLOT(Closing()));
QLabel* label12 = new QLabel( "Zoom:", this );
QFont f12 = label12->font();
f12.setBold(false);
//f12.setPointSize(6);
label12->setFont( f12 );
horizontalLayout14->addWidget(label12);
QmitkCrossWidget* zoomCross = new QmitkCrossWidget();
QPixmap pixZoom(":/threeDEditing/res/threeDEditing/CrossArrow.png");
zoomCross->setPixmap(pixZoom.scaledToWidth(100));
zoomCross->setFixedSize(100,20);
zoomCross->setToolTip("Drag with a left mouse click from the center circle to the sides.");
horizontalLayout14->addWidget(zoomCross);
connect( zoomCross, SIGNAL( SignalDeltaMove( int, int ) ), this, SLOT( ZoomCross( int, int ) ) );
connect( this, SIGNAL(NewToolAssociated(mitk::Tool*)), this, SLOT(OnNewToolAssociated(mitk::Tool*)) );
//std::cout << "ciao from " << __FUNCSIG__ << std::endl;
}
