static void disable_dm(PADAPTER padapter)
{
#ifndef CONFIG_RTL8723A
u8 v8;
#endif
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
struct dm_priv *pdmpriv = &pHalData->dmpriv;
//3 1. disable firmware dynamic mechanism
// disable Power Training, Rate Adaptive
#ifdef CONFIG_RTL8723A
SetBcnCtrlReg(padapter, 0, EN_BCN_FUNCTION);
#else
v8 = rtw_read8(padapter, REG_BCN_CTRL);
v8 &= ~EN_BCN_FUNCTION;
rtw_write8(padapter, REG_BCN_CTRL, v8);
#endif
//3 2. disable driver dynamic mechanism
// disable Dynamic Initial Gain
// disable High Power
// disable Power Tracking
Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, _FALSE);
// enable APK, LCK and IQK but disable power tracking
pdmpriv->TxPowerTrackControl = _FALSE;
Switch_DM_Func(padapter, DYNAMIC_FUNC_SS, _TRUE);
}
void MPT_PwrCtlDM(PADAPTER padapter, u32 bstart)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
struct dm_priv *pdmpriv = &pHalData->dmpriv;
PDM_ODM_T pDM_Odm = &(pHalData->odmpriv);
//Switch_DM_Func(padapter, DYNAMIC_RF_CALIBRATION, bstart);
if (bstart==1){
DBG_871X("in MPT_PwrCtlDM start \n");
Switch_DM_Func(padapter, DYNAMIC_RF_TX_PWR_TRACK, _TRUE);
pdmpriv->InitODMFlag |= ODM_RF_TX_PWR_TRACK ;
pdmpriv->InitODMFlag |= ODM_RF_CALIBRATION ;
pdmpriv->TxPowerTrackControl = _TRUE;
#ifndef CONFIG_RTL8188E
pDM_Odm->RFCalibrateInfo.TxPowerTrackControl = _TRUE;
#endif
}else{
DBG_871X("in MPT_PwrCtlDM stop \n");
disable_dm(padapter);
pdmpriv->TxPowerTrackControl = _FALSE;
#ifndef CONFIG_RTL8188E
pDM_Odm->RFCalibrateInfo.TxPowerTrackControl = _FALSE;
#endif
}
}
static void disable_dm(struct adapter *padapter)
{
u8 v8;
/* 3 1. disable firmware dynamic mechanism */
/* disable Power Training, Rate Adaptive */
v8 = rtw_read8(padapter, REG_BCN_CTRL);
v8 &= ~EN_BCN_FUNCTION;
rtw_write8(padapter, REG_BCN_CTRL, v8);
/* 3 2. disable driver dynamic mechanism */
/* disable Dynamic Initial Gain */
/* disable High Power */
/* disable Power Tracking */
Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, false);
/* enable APK, LCK and IQK but disable power tracking */
Switch_DM_Func(padapter, DYNAMIC_RF_CALIBRATION, true);
}
static void start_bss_network(struct adapter *padapter, u8 *pbuf)
{
u8 *p;
u8 val8, cur_channel, cur_bwmode, cur_ch_offset;
u16 bcn_interval;
u32 acparm;
uint ie_len;
struct registry_priv *pregpriv = &padapter->registrypriv;
struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
struct security_priv *psecuritypriv = &padapter->securitypriv;
struct wlan_bssid_ex *pnetwork = (struct wlan_bssid_ex *)&pmlmepriv->cur_network.network;
struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info;
struct wlan_bssid_ex *pnetwork_mlmeext = &pmlmeinfo->network;
struct HT_info_element *pht_info = NULL;
bcn_interval = (u16)pnetwork->Configuration.BeaconPeriod;
cur_channel = pnetwork->Configuration.DSConfig;
cur_bwmode = HT_CHANNEL_WIDTH_20;
cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
/* check if there is wps ie,
* if there is wpsie in beacon, the hostapd will update
* beacon twice when stating hostapd, and at first time the
* security ie (RSN/WPA IE) will not include in beacon.
*/
if (!rtw_get_wps_ie(pnetwork->ies + _FIXED_IE_LENGTH_, pnetwork->ie_length - _FIXED_IE_LENGTH_, NULL, NULL))
pmlmeext->bstart_bss = true;
/* todo: update wmm, ht cap */
if (pmlmepriv->qospriv.qos_option)
pmlmeinfo->WMM_enable = true;
if (pmlmepriv->htpriv.ht_option) {
pmlmeinfo->WMM_enable = true;
pmlmeinfo->HT_enable = true;
update_hw_ht_param(padapter);
}
/* setting only at first time */
if (pmlmepriv->cur_network.join_res != true) {
/* WEP Key will be set before this function, do not
* clear CAM.
*/
if ((psecuritypriv->dot11PrivacyAlgrthm != _WEP40_) &&
(psecuritypriv->dot11PrivacyAlgrthm != _WEP104_))
flush_all_cam_entry(padapter); /* clear CAM */
}
/* set MSR to AP_Mode */
Set_MSR(padapter, _HW_STATE_AP_);
/* Set BSSID REG */
rtw_hal_set_hwreg(padapter, HW_VAR_BSSID, pnetwork->MacAddress);
/* Set EDCA param reg */
acparm = 0x002F3217; /* VO */
rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_VO, (u8 *)(&acparm));
acparm = 0x005E4317; /* VI */
rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_VI, (u8 *)(&acparm));
acparm = 0x005ea42b;
rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_BE, (u8 *)(&acparm));
acparm = 0x0000A444; /* BK */
rtw_hal_set_hwreg(padapter, HW_VAR_AC_PARAM_BK, (u8 *)(&acparm));
/* Set Security */
val8 = (psecuritypriv->dot11AuthAlgrthm == dot11AuthAlgrthm_8021X) ? 0xcc : 0xcf;
rtw_hal_set_hwreg(padapter, HW_VAR_SEC_CFG, (u8 *)(&val8));
/* Beacon Control related register */
rtw_hal_set_hwreg(padapter, HW_VAR_BEACON_INTERVAL, (u8 *)(&bcn_interval));
UpdateBrateTbl(padapter, pnetwork->SupportedRates);
rtw_hal_set_hwreg(padapter, HW_VAR_BASIC_RATE, pnetwork->SupportedRates);
if (!pmlmepriv->cur_network.join_res) { /* setting only at first time */
/* turn on all dynamic functions */
Switch_DM_Func(padapter, DYNAMIC_ALL_FUNC_ENABLE, true);
}
/* set channel, bwmode */
p = rtw_get_ie((pnetwork->ies + sizeof(struct ndis_802_11_fixed_ie)), _HT_ADD_INFO_IE_, &ie_len, (pnetwork->ie_length - sizeof(struct ndis_802_11_fixed_ie)));
if (p && ie_len) {
pht_info = (struct HT_info_element *)(p + 2);
if ((pregpriv->cbw40_enable) && (pht_info->infos[0] & BIT(2))) {
/* switch to the 40M Hz mode */
cur_bwmode = HT_CHANNEL_WIDTH_40;
switch (pht_info->infos[0] & 0x3) {
case 1:
cur_ch_offset = HAL_PRIME_CHNL_OFFSET_LOWER;
break;
case 3:
cur_ch_offset = HAL_PRIME_CHNL_OFFSET_UPPER;
break;
default:
cur_ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
break;
}
}
}
/* TODO: need to judge the phy parameters on concurrent
* mode for single phy
*/
set_channel_bwmode(padapter, cur_channel, cur_ch_offset, cur_bwmode);
DBG_88E("CH =%d, BW =%d, offset =%d\n", cur_channel, cur_bwmode, cur_ch_offset);
/* */
pmlmeext->cur_channel = cur_channel;
pmlmeext->cur_bwmode = cur_bwmode;
pmlmeext->cur_ch_offset = cur_ch_offset;
pmlmeext->cur_wireless_mode = pmlmepriv->cur_network.network_type;
/* update cur_wireless_mode */
update_wireless_mode(padapter);
/* update capability after cur_wireless_mode updated */
update_capinfo(padapter, rtw_get_capability((struct wlan_bssid_ex *)pnetwork));
/* let pnetwork_mlmeext == pnetwork_mlme. */
memcpy(pnetwork_mlmeext, pnetwork, pnetwork->Length);
if (pmlmeext->bstart_bss) {
update_beacon(padapter, _TIM_IE_, NULL, false);
/* issue beacon frame */
if (send_beacon(padapter) == _FAIL)
DBG_88E("send_beacon, fail!\n");
}
/* update bc/mc sta_info */
update_bmc_sta(padapter);
}
