int main(void)
{
//*******************************************************************
Init();
TMRInit(2); // Initialize Timer interface with Priority=2
BLIInit(); // Initialize Signal interface
//*******************************************************************
//_T1IE = 0; // Temporarily disable Timer1 interrupt
//*******************************************************************
LogInit(); // Initialize Data Logger
//*******************************************************************
// Initialize UART for RX on IPL=6 at
//-------------------------------------------------------------------
// BaudRate = 48 => 115,200 bps
//--------------------------------------
// BaudRate = 100 => 250,000 bps
// BaudRate = 200 => 500,000 bps
// BaudRate = 250 => 625,000 bps
// BaudRate = 350 => 833,333 bps
// BaudRate = 500 => 1,250,000 bps
// BaudRate = 1000 => 2,500,000 bps
//-------------------------------------------------------------------
// Switch 1 controls UART speed - if the switch is in the "On"
// position, UART initialized for high speed (833,333 bps), otherwise
// UART is initialized at low speed (115,200 bps) compatible with
// XBee.
//-------------------------------------------------------------------
if (_SW1)
UARTInitRX(6, 350); // High speed: 833,333 bps
else
UARTInitRX(6, 48); // Low speed: 115,200 bps
//*******************************************************************
UARTDataBlock* DataBlock = NULL;
UARTRXStat Stats;
WORD RC = 0;
int i;
//-----------------------------------
// Start Async read on UART in BLOCK mode
while ( !(RC = UARTRXStartAsyncRead(64, TRUE, TRUE)) );
for (i = 0; i < 10; i++)
{
DataBlock = UARTReadBlock();
BLISignalON();
TMRDelay(50);
UARTFreeBlock(DataBlock);
BLISignalOFF();
}
UARTRXStopAsyncRead();
UARTRXGetStat(&Stats);
//------------------------------
i = sizeof(byte*);
//------------------------------
while(1);
return 0;
}
int main(void)
{
//*******************************************************************
Init();
TMRInit(2); // Initialize Timer interface with Priority=2
BLIInit(); // Initialize Signal interface
//*******************************************************************
//_T1IE = 0; // Temporarily disable Timer1 interrupt
//*******************************************************************
LogInit(); // Initialize Data Logger
UARTInitRX(6, 48); // Initialize UART RX at 115,200 baud
//*******************************************************************
UARTDataBlock* DataBlock = NULL;
UARTRXStat Stats;
WORD RC = 0;
int i;
//-----------------------------------
// Start Async read on UART in BLOCK mode
while ( !(RC = UARTRXStartAsyncRead(64, TRUE, TRUE)) );
for (i = 0; i < 10; i++)
{
DataBlock = UARTReadBlock();
BLISignalON();
TMRDelay(50);
UARTFreeBlock(DataBlock);
BLISignalOFF();
}
UARTRXStopAsyncRead();
UARTRXGetStat(&Stats);
//------------------------------
i = sizeof(byte*);
//------------------------------
while(1);
return 0;
}