/*
========================================================================
Routine Description:
Close a virtual network interface.
Arguments:
dev_p which WLAN network interface
Return Value:
0: close successfully
otherwise: close fail
Note:
========================================================================
*/
INT ApCli_VirtualIF_Close(
IN PNET_DEV dev_p)
{
UCHAR ifIndex;
PRTMP_ADAPTER pAd;
pAd = RTMP_OS_NETDEV_GET_PRIV(dev_p);
ASSERT(pAd);
DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> %s\n", __FUNCTION__, RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));
for (ifIndex = 0; ifIndex < MAX_APCLI_NUM; ifIndex++)
{
if (pAd->ApCfg.ApCliTab[ifIndex].dev == dev_p)
{
RTMP_OS_NETDEV_STOP_QUEUE(dev_p);
// send disconnect-req to sta State Machine.
if (pAd->ApCfg.ApCliTab[ifIndex].Enable)
{
MlmeEnqueue(pAd, APCLI_CTRL_STATE_MACHINE, APCLI_CTRL_DISCONNECT_REQ, 0, NULL, ifIndex);
RTMP_MLME_HANDLER(pAd);
DBGPRINT(RT_DEBUG_TRACE, ("(%s) ApCli interface[%d] startdown.\n", __FUNCTION__, ifIndex));
}
break;
}
}
VIRTUAL_IF_DOWN(pAd);
RT_MOD_DEC_USE_COUNT();
return 0;
} /* End of ApCli_VirtualIF_Close */
static void rtusb_disconnect(struct usb_interface *intf)
{
struct usb_device *dev = interface_to_usbdev(intf);
VOID *pAd;
pAd = usb_get_intfdata(intf);
#ifdef IFUP_IN_PROBE
VIRTUAL_IF_DOWN(pAd);
#endif /* IFUP_IN_PROBE */
usb_set_intfdata(intf, NULL);
rt2870_disconnect(dev, pAd);
#ifdef CONFIG_PM
#ifdef USB_SUPPORT_SELECTIVE_SUSPEND
printk("rtusb_disconnect usb_autopm_put_interface \n");
usb_autopm_put_interface(intf);
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
printk("%s() => pm_usage_cnt %d \n", __FUNCTION__,
atomic_read(&intf->pm_usage_cnt));
#else
printk("%s() => pm_usage_cnt %d \n", __FUNCTION__, intf->pm_usage_cnt);
#endif
#endif /* USB_SUPPORT_SELECTIVE_SUSPEND */
#endif /* CONFIG_PM */
}
/*
========================================================================
Routine Description:
Close a virtual network interface.
Arguments:
pDev which WLAN network interface
Return Value:
0: close successfully
otherwise: close fail
Note:
========================================================================
*/
INT MBSS_VirtualIF_Close(
IN PNET_DEV pDev)
{
PRTMP_ADAPTER pAd;
INT BssId;
DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> MBSSVirtualIF_close\n", RTMP_OS_NETDEV_GET_DEVNAME(pDev)));
pAd = RTMP_OS_NETDEV_GET_PRIV(pDev);
BssId = RT28xx_MBSS_IdxGet(pAd, pDev);
if (BssId < 0)
return -1;
RTMP_OS_NETDEV_STOP_QUEUE(pDev);
/* kick out all stas behind the Bss */
MbssKickOutStas(pAd, BssId, REASON_DISASSOC_INACTIVE);
pAd->ApCfg.MBSSID[BssId].bBcnSntReq = FALSE;
APMakeAllBssBeacon(pAd);
APUpdateAllBeaconFrame(pAd);
VIRTUAL_IF_DOWN(pAd);
RT_MOD_DEC_USE_COUNT();
return 0;
} /* End of MBSS_VirtualIF_Close */
/*
========================================================================
Routine Description:
Close raxx interface.
Arguments:
*net_dev the raxx interface pointer
Return Value:
0 Open OK
otherwise Open Fail
Note:
1. if open fail, kernel will not call the close function.
2. Free memory for
(1) Mlme Memory Handler: MlmeHalt()
(2) TX & RX: RTMPFreeTxRxRingMemory()
(3) BA Reordering: ba_reordering_resource_release()
========================================================================
*/
int MainVirtualIF_close(IN struct net_device *net_dev)
{
RTMP_ADAPTER *pAd = NULL;
GET_PAD_FROM_NET_DEV(pAd, net_dev);
// Sanity check for pAd
if (pAd == NULL)
return 0; // close ok
netif_carrier_off(pAd->net_dev);
netif_stop_queue(pAd->net_dev);
#ifdef CONFIG_AP_SUPPORT
pAd->ApCfg.MBSSID[MAIN_MBSSID].bBcnSntReq = FALSE;
IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
{
// kick out all STAs behind the bss.
MbssKickOutStas(pAd, MAIN_MBSSID, REASON_DISASSOC_INACTIVE);
}
APMakeAllBssBeacon(pAd);
APUpdateAllBeaconFrame(pAd);
#endif // CONFIG_AP_SUPPORT //
VIRTUAL_IF_DOWN(pAd);
RT_MOD_DEC_USE_COUNT();
return 0; // close ok
}
static int rt2870_suspend(
struct usb_interface *intf,
pm_message_t state)
{
struct net_device *net_dev;
VOID *pAd = usb_get_intfdata(intf);
late_resume_flag = TRUE;
#ifdef USB_SUPPORT_SELECTIVE_SUSPEND
UCHAR Flag;
#endif
#if defined(CONFIG_HAS_EARLYSUSPEND) || defined(CONFIG_ANDROID_POWER)
if ((RT_IS_EARLYSUSPEND_REGISTERED((PRTMP_ADAPTER)pAd)) && (late_resume_flag == TRUE)){
VIRTUAL_IF_DOWN((VOID *)pAd);
DBGPRINT(RT_DEBUG_OFF, ("%s, We has already register earlysuspend, make VIRTUAL_IF_DOWN\n", __func__));
return 0;
}
#endif
#ifdef USB_SUPPORT_SELECTIVE_SUSPEND
// UCHAR Flag;
DBGPRINT(RT_DEBUG_ERROR, ("autosuspend===> rt2870_suspend()\n"));
/* RtmpOSWrielessEventSend(pAd->net_dev, RT_WLAN_EVENT_CGIWAP, -1, NULL, NULL, 0);*/
RTMP_DRIVER_ADAPTER_END_DISSASSOCIATE(pAd);
/* if(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF)) */
RTMP_DRIVER_ADAPTER_IDLE_RADIO_OFF_TEST(pAd, &Flag);
if(!Flag)
{
/*RT28xxUsbAsicRadioOff(pAd); */
RTMP_DRIVER_ADAPTER_RT28XX_USB_ASICRADIO_OFF(pAd);
/*RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_CPU_SUSPEND); */
RTMP_DRIVER_ADAPTER_CPU_SUSPEND_SET(pAd);
}
/*RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_SUSPEND); */
RTMP_DRIVER_ADAPTER_SUSPEND_SET(pAd);
DBGPRINT(RT_DEBUG_ERROR, ("autosuspend <=== rt2870_suspend()\n"));
return 0;
#endif /* USB_SUPPORT_SELECTIVE_SUSPEND */
DBGPRINT(RT_DEBUG_TRACE, ("===> rt2870_suspend()\n"));
// RtmpOSWrielessEventSend(pAd->net_dev, RT_WLAN_EVENT_CGIWAP, -1, NULL, NULL, 0);
// RTMP_DRIVER_ADAPTER_END_DISSASSOCIATE(pAd);
// RTMP_DRIVER_ADAPTER_RT28XX_USB_ASICRADIO_OFF(pAd);
/* net_dev = pAd->net_dev; */
RTMP_DRIVER_NET_DEV_GET(pAd, &net_dev);
netif_device_detach(net_dev);
RTMP_DRIVER_USB_SUSPEND(pAd, netif_running(net_dev));
DBGPRINT(RT_DEBUG_TRACE, ("<=== rt2870_suspend()\n"));
return 0;
}
/*
========================================================================
Routine Description:
Close a virtual network interface.
Arguments:
pDev which WLAN network interface
Return Value:
0: close successfully
otherwise: close fail
Note:
========================================================================
*/
INT MBSS_VirtualIF_Close(struct net_device *pDev)
{
VOID *pAd;
DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> MBSSVirtualIF_close\n", RTMP_OS_NETDEV_GET_DEVNAME(pDev)));
pAd = RTMP_OS_NETDEV_GET_PRIV(pDev);
RTMP_OS_NETDEV_STOP_QUEUE(pDev);
RTMP_AP_IoctlHandle(pAd, NULL, CMD_RTPRIV_IOCTL_MBSS_CLOSE, 0, pDev, 0);
VIRTUAL_IF_DOWN(pAd);
RT_MOD_DEC_USE_COUNT();
return 0;
}
/*
========================================================================
Routine Description:
Close a virtual network interface.
Arguments:
dev_p which WLAN network interface
Return Value:
0: close successfully
otherwise: close fail
Note:
========================================================================
*/
INT ApCli_VirtualIF_Close(PNET_DEV dev_p)
{
VOID *pAd;
pAd = RTMP_OS_NETDEV_GET_PRIV(dev_p);
ASSERT(pAd);
MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_TRACE, ("%s: ===> %s\n", __FUNCTION__, RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));
RTMP_AP_IoctlHandle(pAd, NULL, CMD_RTPRIV_IOCTL_APC_CLOSE, 0, dev_p, 0);
VIRTUAL_IF_DOWN(pAd);
RT_MOD_DEC_USE_COUNT();
return 0;
}
INT WdsVirtualIF_close(PNET_DEV dev)
{
VOID *pAd;
MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_TRACE, ("%s: ===> VirtualIF_close\n", RTMP_OS_NETDEV_GET_DEVNAME(dev)));
pAd = RTMP_OS_NETDEV_GET_PRIV(dev);
//RTMP_OS_NETDEV_CARRIER_OFF(dev);
RTMP_OS_NETDEV_STOP_QUEUE(dev);
VIRTUAL_IF_DOWN(pAd);
RT_MOD_DEC_USE_COUNT();
return 0;
}
int MainVirtualIF_close(IN struct net_device *net_dev)
{
RTMP_ADAPTER *pAd = net_dev->ml_priv;
if (pAd == NULL)
return 0;
netif_carrier_off(pAd->net_dev);
netif_stop_queue(pAd->net_dev);
VIRTUAL_IF_DOWN(pAd);
RT_MOD_DEC_USE_COUNT();
return 0;
}
static int rt2870_suspend(
struct usb_interface *intf,
pm_message_t state)
{
struct net_device *net_dev;
VOID *pAd = usb_get_intfdata(intf);
#ifdef CONFIG_HAS_EARLYSUSPEND
UCHAR check_early_suspend_flag;
RTMP_DRIVER_ADAPTER_CHECK_EARLYSUSPEND(pAd, &check_early_suspend_flag);
if (check_early_suspend_flag == TRUE){
VIRTUAL_IF_DOWN(pAd);
DBGPRINT(RT_DEBUG_OFF, ("%s, We has already register earlysuspend, make VIRTUAL_IF_DOWN\n", __func__));
return 0;
}
#endif
#ifdef USB_SUPPORT_SELECTIVE_SUSPEND
UCHAR Flag;
DBGPRINT(RT_DEBUG_ERROR, ("autosuspend===> rt2870_suspend()\n"));
{
/* if(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_IDLE_RADIO_OFF)) */
RTMP_DRIVER_ADAPTER_END_DISSASSOCIATE(pAd);
RTMP_DRIVER_ADAPTER_IDLE_RADIO_OFF_TEST(pAd, &Flag);
if(!Flag)
{
/*RT28xxUsbAsicRadioOff(pAd); */
RTMP_DRIVER_ADAPTER_RT28XX_USB_ASICRADIO_OFF(pAd);
}
}
/*RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_SUSPEND); */
RTMP_DRIVER_ADAPTER_SUSPEND_SET(pAd);
return 0;
#endif /* USB_SUPPORT_SELECTIVE_SUSPEND */
DBGPRINT(RT_DEBUG_TRACE, ("===> rt2870_suspend()\n"));
/* net_dev = pAd->net_dev; */
RTMP_DRIVER_NET_DEV_GET(pAd, &net_dev);
netif_device_detach(net_dev);
RTMP_DRIVER_USB_SUSPEND(pAd, netif_running(net_dev));
DBGPRINT(RT_DEBUG_TRACE, ("<=== rt2870_suspend()\n"));
return 0;
}
INT WdsVirtualIF_close(
IN PNET_DEV dev)
{
VOID *pAd;
DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> VirtualIF_close\n", RTMP_OS_NETDEV_GET_DEVNAME(dev)));
pAd = RTMP_OS_NETDEV_GET_PRIV(dev);
//RTMP_OS_NETDEV_CARRIER_OFF(dev);
RTMP_OS_NETDEV_STOP_QUEUE(dev);
VIRTUAL_IF_DOWN(pAd);
RT_MOD_DEC_USE_COUNT();
return 0;
}
/*
========================================================================
Routine Description:
Close a virtual network interface.
Arguments:
dev_p which WLAN network interface
Return Value:
0: close successfully
otherwise: close fail
Note:
========================================================================
*/
int ApCli_VirtualIF_Close(
IN PNET_DEV dev_p)
{
/* UCHAR ifIndex; */
VOID *pAd;
pAd = RTMP_OS_NETDEV_GET_PRIV(dev_p);
ASSERT(pAd);
DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> %s\n", __FUNCTION__, RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));
RTMP_AP_IoctlHandle(pAd, NULL, CMD_RTPRIV_IOCTL_APC_CLOSE, 0, dev_p, 0);
VIRTUAL_IF_DOWN(pAd);
RT_MOD_DEC_USE_COUNT();
return 0;
} /* End of ApCli_VirtualIF_Close */
/*
========================================================================
Routine Description:
Close a virtual network interface.
Arguments:
dev_p which WLAN network interface
Return Value:
0: close successfully
otherwise: close fail
Note:
========================================================================
*/
int P2P_VirtualIF_Close(
IN PNET_DEV dev_p)
{
VOID *pAd;
pAd = RTMP_OS_NETDEV_GET_PRIV(dev_p);
ASSERT(pAd);
DBGPRINT(RT_DEBUG_TRACE, ("%s: ===> %s\n", __FUNCTION__, RTMP_OS_NETDEV_GET_DEVNAME(dev_p)));
/* stop p2p. */
RTMP_OS_NETDEV_STOP_QUEUE(dev_p);
RTMP_COM_IoctlHandle(pAd, NULL, CMD_RTPRIV_IOCTL_P2P_CLOSE, 0, dev_p, 0);
VIRTUAL_IF_DOWN(pAd);
RT_MOD_DEC_USE_COUNT();
return 0;
}
/*
========================================================================
Routine Description:
Close raxx interface.
Arguments:
*net_dev the raxx interface pointer
Return Value:
0 Open OK
otherwise Open Fail
Note:
1. if open fail, kernel will not call the close function.
2. Free memory for
(1) Mlme Memory Handler: MlmeHalt()
(2) TX & RX: RTMPFreeTxRxRingMemory()
(3) BA Reordering: ba_reordering_resource_release()
========================================================================
*/
int MainVirtualIF_close(IN struct net_device *net_dev)
{
RTMP_ADAPTER *pAd = NULL;
GET_PAD_FROM_NET_DEV(pAd, net_dev);
// Sanity check for pAd
if (pAd == NULL)
return 0; // close ok
netif_carrier_off(pAd->net_dev);
netif_stop_queue(pAd->net_dev);
VIRTUAL_IF_DOWN(pAd);
RT_MOD_DEC_USE_COUNT();
return 0; // close ok
}
static void rtusb_disconnect(struct usb_interface *intf)
{
struct usb_device *dev = interface_to_usbdev(intf);
VOID *pAd;
int lockResult;
lockResult = down_trylock(&rtusb_module_mutex);
if( (lockResult == 0) || (rtusb_disconnect_by_rmmod == 1))
{
DBGPRINT(RT_DEBUG_WARN, ("%s():lockResult=%d, rmmod=%d!\n",
__FUNCTION__, lockResult, rtusb_disconnect_by_rmmod));
pAd = usb_get_intfdata(intf);
#ifdef IFUP_IN_PROBE
VIRTUAL_IF_DOWN(pAd);
#endif /* IFUP_IN_PROBE */
usb_set_intfdata(intf, NULL);
rt2870_disconnect(dev, pAd);
if (lockResult == 0)
up(&rtusb_module_mutex);
}
else
{
DBGPRINT(RT_DEBUG_WARN, ("%s():acquire module mutex failed\n", __FUNCTION__));
}
#ifdef CONFIG_PM
#ifdef USB_SUPPORT_SELECTIVE_SUSPEND
printk("rtusb_disconnect usb_autopm_put_interface \n");
usb_autopm_put_interface(intf);
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32)
printk(" ^^rt2870_disconnect ====> pm_usage_cnt %d \n", atomic_read(&intf->pm_usage_cnt));
#else
printk(" rt2870_disconnect ====> pm_usage_cnt %d \n", intf->pm_usage_cnt);
#endif
#endif /* USB_SUPPORT_SELECTIVE_SUSPEND */
#endif /* CONFIG_PM */
}
/*
========================================================================
Routine Description:
Close raxx interface.
Arguments:
*net_dev the raxx interface pointer
Return Value:
0 Open OK
otherwise Open Fail
Note:
1. if open fail, kernel will not call the close function.
2. Free memory for
(1) Mlme Memory Handler: MlmeHalt()
(2) TX & RX: RTMPFreeTxRxRingMemory()
(3) BA Reordering: ba_reordering_resource_release()
========================================================================
*/
int MainVirtualIF_close(IN struct net_device *net_dev)
{
struct rt_rtmp_adapter *pAd = NULL;
GET_PAD_FROM_NET_DEV(pAd, net_dev);
/* Sanity check for pAd */
if (pAd == NULL)
return 0; /* close ok */
netif_carrier_off(pAd->net_dev);
netif_stop_queue(pAd->net_dev);
{
BOOLEAN Cancelled;
if (INFRA_ON(pAd) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))) {
struct rt_mlme_disassoc_req DisReq;
struct rt_mlme_queue_elem *MsgElem =
(struct rt_mlme_queue_elem *)kmalloc(sizeof(struct rt_mlme_queue_elem),
MEM_ALLOC_FLAG);
if (MsgElem) {
COPY_MAC_ADDR(DisReq.Addr,
pAd->CommonCfg.Bssid);
DisReq.Reason = REASON_DEAUTH_STA_LEAVING;
MsgElem->Machine = ASSOC_STATE_MACHINE;
MsgElem->MsgType = MT2_MLME_DISASSOC_REQ;
MsgElem->MsgLen =
sizeof(struct rt_mlme_disassoc_req);
NdisMoveMemory(MsgElem->Msg, &DisReq,
sizeof
(struct rt_mlme_disassoc_req));
/* Prevent to connect AP again in STAMlmePeriodicExec */
pAd->MlmeAux.AutoReconnectSsidLen = 32;
NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid,
pAd->MlmeAux.
AutoReconnectSsidLen);
pAd->Mlme.CntlMachine.CurrState =
CNTL_WAIT_OID_DISASSOC;
MlmeDisassocReqAction(pAd, MsgElem);
kfree(MsgElem);
}
RTMPusecDelay(1000);
}
RTMPCancelTimer(&pAd->StaCfg.StaQuickResponeForRateUpTimer,
&Cancelled);
RTMPCancelTimer(&pAd->StaCfg.WpaDisassocAndBlockAssocTimer,
&Cancelled);
}
VIRTUAL_IF_DOWN(pAd);
RT_MOD_DEC_USE_COUNT();
return 0; /* close ok */
}
/*
========================================================================
Routine Description:
Close raxx interface.
Arguments:
*net_dev the raxx interface pointer
Return Value:
0 Open OK
otherwise Open Fail
Note:
1. if open fail, kernel will not call the close function.
2. Free memory for
(1) Mlme Memory Handler: MlmeHalt()
(2) TX & RX: RTMPFreeTxRxRingMemory()
(3) BA Reordering: ba_reordering_resource_release()
========================================================================
*/
int MainVirtualIF_close(IN struct net_device *net_dev)
{
RTMP_ADAPTER *pAd = NULL;
GET_PAD_FROM_NET_DEV(pAd, net_dev);
// Sanity check for pAd
if (pAd == NULL)
return 0; // close ok
netif_carrier_off(pAd->net_dev);
netif_stop_queue(pAd->net_dev);
#ifdef CONFIG_AP_SUPPORT
pAd->ApCfg.MBSSID[MAIN_MBSSID].bBcnSntReq = FALSE;
IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
{
// kick out all STAs behind the bss.
MbssKickOutStas(pAd, MAIN_MBSSID, REASON_DISASSOC_INACTIVE);
}
APMakeAllBssBeacon(pAd);
APUpdateAllBeaconFrame(pAd);
#endif // CONFIG_AP_SUPPORT //
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
#ifdef QOS_DLS_SUPPORT
// send DLS-TEAR_DOWN message,
if (pAd->CommonCfg.bDLSCapable)
{
UCHAR i;
// tear down local dls table entry
for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
{
if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
{
RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
pAd->StaCfg.DLSEntry[i].Valid = FALSE;
}
}
// tear down peer dls table entry
for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
{
if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
{
RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
pAd->StaCfg.DLSEntry[i].Valid = FALSE;
}
}
RTMP_MLME_HANDLER(pAd);
}
#endif // QOS_DLS_SUPPORT //
if (INFRA_ON(pAd) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
MLME_DISASSOC_REQ_STRUCT DisReq;
MLME_QUEUE_ELEM *MsgElem = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);
if (MsgElem)
{
COPY_MAC_ADDR(DisReq.Addr, pAd->CommonCfg.Bssid);
DisReq.Reason = REASON_DEAUTH_STA_LEAVING;
MsgElem->Machine = ASSOC_STATE_MACHINE;
MsgElem->MsgType = MT2_MLME_DISASSOC_REQ;
MsgElem->MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT);
NdisMoveMemory(MsgElem->Msg, &DisReq, sizeof(MLME_DISASSOC_REQ_STRUCT));
// Prevent to connect AP again in STAMlmePeriodicExec
pAd->MlmeAux.AutoReconnectSsidLen= 32;
NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
MlmeDisassocReqAction(pAd, MsgElem);
kfree(MsgElem);
}
RTMPusecDelay(1000);
}
#ifdef WPA_SUPPLICANT_SUPPORT
#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
// send wireless event to wpa_supplicant for infroming interface down.
RtmpOSWirelessEventSend(pAd, IWEVCUSTOM, RT_INTERFACE_DOWN, NULL, NULL, 0);
#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
if (pAd->StaCfg.pWpsProbeReqIe)
{
kfree(pAd->StaCfg.pWpsProbeReqIe);
pAd->StaCfg.pWpsProbeReqIe = NULL;
pAd->StaCfg.WpsProbeReqIeLen = 0;
}
if (pAd->StaCfg.pWpaAssocIe)
{
kfree(pAd->StaCfg.pWpaAssocIe);
pAd->StaCfg.pWpaAssocIe = NULL;
pAd->StaCfg.WpaAssocIeLen = 0;
}
#endif // WPA_SUPPLICANT_SUPPORT //
}
#endif // CONFIG_STA_SUPPORT //
VIRTUAL_IF_DOWN(pAd);
RT_MOD_DEC_USE_COUNT();
return 0; // close ok
}
/*
========================================================================
Routine Description:
Close raxx interface.
Arguments:
*net_dev the raxx interface pointer
Return Value:
0 Open OK
otherwise Open Fail
Note:
1. if open fail, kernel will not call the close function.
2. Free memory for
(1) Mlme Memory Handler: MlmeHalt()
(2) TX & RX: RTMPFreeTxRxRingMemory()
(3) BA Reordering: ba_reordering_resource_release()
========================================================================
*/
int MainVirtualIF_close(IN struct net_device *net_dev)
{
RTMP_ADAPTER *pAd = RTMP_OS_NETDEV_GET_PRIV(net_dev);
// Sanity check for pAd
if (pAd == NULL)
return 0; // close ok
netif_carrier_off(pAd->net_dev);
netif_stop_queue(pAd->net_dev);
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
BOOLEAN Cancelled;
#ifdef QOS_DLS_SUPPORT
// send DLS-TEAR_DOWN message,
if (pAd->CommonCfg.bDLSCapable)
{
UCHAR i;
// tear down local dls table entry
for (i=0; i<MAX_NUM_OF_INIT_DLS_ENTRY; i++)
{
if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
{
RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
pAd->StaCfg.DLSEntry[i].Valid = FALSE;
}
}
// tear down peer dls table entry
for (i=MAX_NUM_OF_INIT_DLS_ENTRY; i<MAX_NUM_OF_DLS_ENTRY; i++)
{
if (pAd->StaCfg.DLSEntry[i].Valid && (pAd->StaCfg.DLSEntry[i].Status == DLS_FINISH))
{
RTMPSendDLSTearDownFrame(pAd, pAd->StaCfg.DLSEntry[i].MacAddr);
pAd->StaCfg.DLSEntry[i].Status = DLS_NONE;
pAd->StaCfg.DLSEntry[i].Valid = FALSE;
}
}
RTMP_MLME_HANDLER(pAd);
}
#endif // QOS_DLS_SUPPORT //
if (INFRA_ON(pAd) &&
(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
{
MLME_DISASSOC_REQ_STRUCT DisReq;
MLME_QUEUE_ELEM *MsgElem = (MLME_QUEUE_ELEM *) kmalloc(sizeof(MLME_QUEUE_ELEM), MEM_ALLOC_FLAG);
if (MsgElem)
{
COPY_MAC_ADDR(DisReq.Addr, pAd->CommonCfg.Bssid);
DisReq.Reason = REASON_DEAUTH_STA_LEAVING;
MsgElem->Machine = ASSOC_STATE_MACHINE;
MsgElem->MsgType = MT2_MLME_DISASSOC_REQ;
MsgElem->MsgLen = sizeof(MLME_DISASSOC_REQ_STRUCT);
NdisMoveMemory(MsgElem->Msg, &DisReq, sizeof(MLME_DISASSOC_REQ_STRUCT));
// Prevent to connect AP again in STAMlmePeriodicExec
pAd->MlmeAux.AutoReconnectSsidLen= 32;
NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
MlmeDisassocReqAction(pAd, MsgElem);
kfree(MsgElem);
}
RTMPusecDelay(1000);
}
RTMPCancelTimer(&pAd->StaCfg.StaQuickResponeForRateUpTimer, &Cancelled);
RTMPCancelTimer(&pAd->StaCfg.WpaDisassocAndBlockAssocTimer, &Cancelled);
#ifdef WPA_SUPPLICANT_SUPPORT
#ifndef NATIVE_WPA_SUPPLICANT_SUPPORT
// send wireless event to wpa_supplicant for infroming interface down.
RtmpOSWrielessEventSend(pAd, IWEVCUSTOM, RT_INTERFACE_DOWN, NULL, NULL, 0);
#endif // NATIVE_WPA_SUPPLICANT_SUPPORT //
#endif // WPA_SUPPLICANT_SUPPORT //
}
#endif // CONFIG_STA_SUPPORT //
VIRTUAL_IF_DOWN(pAd);
RT_MOD_DEC_USE_COUNT();
return 0; // close ok
}