NTSTATUS
XenBus_DeviceFileInit(WDFDEVICE device, PWDF_IO_QUEUE_CONFIG queue_config, WDFFILEOBJECT file_object)
{
NTSTATUS status;
PXENPCI_DEVICE_INTERFACE_DATA xpdid = GetXpdid(file_object);
WDF_IO_QUEUE_CONFIG internal_queue_config;
FUNCTION_ENTER();
xpdid->EvtFileCleanup = XenBus_EvtFileCleanup;
xpdid->EvtFileClose = XenBus_EvtFileClose;
queue_config->EvtIoRead = XenBus_EvtIoRead;
queue_config->EvtIoWrite = XenBus_EvtIoWrite;
// queue_config->EvtIoDeviceControl = XenBus_EvtIoDeviceControl;
InitializeListHead(&xpdid->xenbus.read_list_head);
InitializeListHead(&xpdid->xenbus.watch_list_head);
xpdid->xenbus.len = 0;
WDF_IO_QUEUE_CONFIG_INIT(&internal_queue_config, WdfIoQueueDispatchManual);
status = WdfIoQueueCreate(device, &internal_queue_config, WDF_NO_OBJECT_ATTRIBUTES, &xpdid->xenbus.io_queue);
if (!NT_SUCCESS(status)) {
KdPrint(("Error creating queue 0x%x\n", status));
FUNCTION_EXIT();
return status;
}
FUNCTION_EXIT();
return status;
}
NTSTATUS
FireShockIoReadQueueInitialize(
WDFDEVICE Device
)
{
PDEVICE_CONTEXT pDeviceContext;
NTSTATUS status;
WDF_IO_QUEUE_CONFIG queueConfig;
pDeviceContext = DeviceGetContext(Device);
WDF_IO_QUEUE_CONFIG_INIT(
&queueConfig,
WdfIoQueueDispatchManual
);
status = WdfIoQueueCreate(
Device,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&pDeviceContext->IoReadQueue
);
if (!NT_SUCCESS(status)) {
TraceEvents(TRACE_LEVEL_ERROR, TRACE_QUEUE, "WdfIoQueueCreate failed %!STATUS!", status);
return status;
}
return status;
}
NTSTATUS
tgwinkQueueInitialize(
_In_ WDFDEVICE Device
)
{
NTSTATUS status;
WDF_IO_QUEUE_CONFIG queueConfig;
PDEVICE_CONTEXT deviceContext;
PAGED_CODE();
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE(
&queueConfig,
WdfIoQueueDispatchSequential
);
queueConfig.EvtIoDeviceControl = tgwinkEvtIoDeviceControl;
queueConfig.EvtIoStop = tgwinkEvtIoStop;
queueConfig.EvtIoRead = tgwinkEvtIoRead;
queueConfig.EvtIoWrite = tgwinkEvtIoWrite;
deviceContext = DeviceGetContext(Device);
status = WdfIoQueueCreate(
Device,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&deviceContext->IoDefaultQueue
);
WDF_IO_QUEUE_CONFIG_INIT(&queueConfig, WdfIoQueueDispatchManual);
status = WdfIoQueueCreate(
Device,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&deviceContext->NotificationQueue);
return status;
}
NTSTATUS
PLxInitializeDeviceExtension(
IN PDEVICE_EXTENSION DevExt
)
/*++
Routine Description:
This routine is called by EvtDeviceAdd. Here the device context is
initialized and all the software resources required by the device is
allocated.
Arguments:
DevExt Pointer to the Device Extension
Return Value:
NTSTATUS
--*/
{
NTSTATUS status;
ULONG dteCount;
WDF_IO_QUEUE_CONFIG queueConfig;
PAGED_CODE();
//
// Set Maximum Transfer Length (which must be less than the SRAM size).
//
DevExt->MaximumTransferLength = PCI9656_MAXIMUM_TRANSFER_LENGTH;
if(DevExt->MaximumTransferLength > PCI9656_SRAM_SIZE) {
DevExt->MaximumTransferLength = PCI9656_SRAM_SIZE;
}
TraceEvents(TRACE_LEVEL_INFORMATION, DBG_PNP,
"MaximumTransferLength %d", DevExt->MaximumTransferLength);
//
// Calculate the number of DMA_TRANSFER_ELEMENTS + 1 needed to
// support the MaximumTransferLength.
//
dteCount = BYTES_TO_PAGES((ULONG) ROUND_TO_PAGES(
DevExt->MaximumTransferLength) + PAGE_SIZE);
TraceEvents(TRACE_LEVEL_INFORMATION, DBG_PNP, "Number of DTEs %d", dteCount);
//
// Set the number of DMA_TRANSFER_ELEMENTs (DTE) to be available.
//
DevExt->WriteTransferElements = dteCount;
DevExt->ReadTransferElements = dteCount;
//
// The PCI9656 has two DMA Channels. This driver will use DMA Channel 0
// as the "ToDevice" channel (Writes) and DMA Channel 1 as the
// "From Device" channel (Reads).
//
// In order to support "duplex" DMA operation (the ability to have
// concurrent reads and writes) two Dispatch Queues are created:
// one for the Write (ToDevice) requests and another for the Read
// (FromDevice) requests. While eache Dispatch Queue will operate
// independently for each other, the requests within a given Dispatch
// Queue will be serialized. This is hardware can only process one request
// per DMA Channel at a time.
//
//
// Setup a queue to handle only IRP_MJ_WRITE requests in Sequential
// dispatch mode. This mode ensures there is only one write request
// outstanding in the driver at any time. Framework will present the next
// request only if the current request is completed.
// Since we have configured the queue to dispatch all the specific requests
// we care about, we don't need a default queue. A default queue is
// used to receive requests that are not preconfigured to goto
// a specific queue.
//
WDF_IO_QUEUE_CONFIG_INIT ( &queueConfig,
WdfIoQueueDispatchSequential);
queueConfig.EvtIoWrite = PLxEvtIoWrite;
//
// Static Driver Verifier (SDV) displays a warning if it doesn't find the
// EvtIoStop callback on a power-managed queue. The 'assume' below lets
// SDV know not to worry about the EvtIoStop.
// If not explicitly set, the framework creates power-managed queues when
// the device is not a filter driver. Normally the EvtIoStop is required
// for power-managed queues, but for this driver it is not need b/c the
// driver doesn't hold on to the requests for long time or forward them to
// other drivers.
// If the EvtIoStop callback is not implemented, the framework
// waits for all in-flight (driver owned) requests to be done before
// moving the device in the Dx/sleep states or before removing the device,
// which is the correct behavior for this type of driver.
// If the requests were taking an undetermined amount of time to complete,
// or the requests were forwarded to a lower driver/another stack, the
// queue should have an EvtIoStop/EvtIoResume.
//
__analysis_assume(queueConfig.EvtIoStop != 0);
status = WdfIoQueueCreate( DevExt->Device,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&DevExt->WriteQueue );
__analysis_assume(queueConfig.EvtIoStop == 0);
if(!NT_SUCCESS(status)) {
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfIoQueueCreate failed: %!STATUS!", status);
return status;
}
//
// Set the Write Queue forwarding for IRP_MJ_WRITE requests.
//
status = WdfDeviceConfigureRequestDispatching( DevExt->Device,
DevExt->WriteQueue,
WdfRequestTypeWrite);
if(!NT_SUCCESS(status)) {
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"DeviceConfigureRequestDispatching failed: %!STATUS!", status);
return status;
}
//
// Create a new IO Queue for IRP_MJ_READ requests in sequential mode.
//
WDF_IO_QUEUE_CONFIG_INIT( &queueConfig,
WdfIoQueueDispatchSequential);
queueConfig.EvtIoRead = PLxEvtIoRead;
//
// By default, Static Driver Verifier (SDV) displays a warning if it
// doesn't find the EvtIoStop callback on a power-managed queue.
// The 'assume' below causes SDV to suppress this warning. If the driver
// has not explicitly set PowerManaged to WdfFalse, the framework creates
// power-managed queues when the device is not a filter driver. Normally
// the EvtIoStop is required for power-managed queues, but for this driver
// it is not needed b/c the driver doesn't hold on to the requests for
// long time or forward them to other drivers.
// If the EvtIoStop callback is not implemented, the framework waits for
// all driver-owned requests to be done before moving in the Dx/sleep
// states or before removing the device, which is the correct behavior
// for this type of driver. If the requests were taking an indeterminate
// amount of time to complete, or if the driver forwarded the requests
// to a lower driver/another stack, the queue should have an
// EvtIoStop/EvtIoResume.
//
__analysis_assume(queueConfig.EvtIoStop != 0);
status = WdfIoQueueCreate( DevExt->Device,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&DevExt->ReadQueue );
__analysis_assume(queueConfig.EvtIoStop == 0);
if(!NT_SUCCESS(status)) {
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfIoQueueCreate failed: %!STATUS!", status);
return status;
}
//
// Set the Read Queue forwarding for IRP_MJ_READ requests.
//
status = WdfDeviceConfigureRequestDispatching( DevExt->Device,
DevExt->ReadQueue,
WdfRequestTypeRead);
if(!NT_SUCCESS(status)) {
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"DeviceConfigureRequestDispatching failed: %!STATUS!", status);
return status;
}
//
// Create a WDFINTERRUPT object.
//
status = PLxInterruptCreate(DevExt);
if (!NT_SUCCESS(status)) {
return status;
}
status = PLxInitializeDMA( DevExt );
if (!NT_SUCCESS(status)) {
return status;
}
return status;
}
NTSTATUS PVPanicEvtDeviceAdd(IN WDFDRIVER Driver,
IN PWDFDEVICE_INIT DeviceInit)
{
NTSTATUS status;
WDFDEVICE device;
WDF_PNPPOWER_EVENT_CALLBACKS pnpPowerCallbacks;
WDF_FILEOBJECT_CONFIG fileConfig;
WDF_OBJECT_ATTRIBUTES attributes;
WDF_IO_QUEUE_CONFIG queueConfig;
PDEVICE_CONTEXT context;
DECLARE_CONST_UNICODE_STRING(dosDeviceName, PVPANIC_DOS_DEVICE_NAME);
UNREFERENCED_PARAMETER(Driver);
TraceEvents(TRACE_LEVEL_VERBOSE, DBG_INIT, "--> %!FUNC!");
PAGED_CODE();
WDF_PNPPOWER_EVENT_CALLBACKS_INIT(&pnpPowerCallbacks);
pnpPowerCallbacks.EvtDevicePrepareHardware = PVPanicEvtDevicePrepareHardware;
pnpPowerCallbacks.EvtDeviceReleaseHardware = PVPanicEvtDeviceReleaseHardware;
pnpPowerCallbacks.EvtDeviceD0Entry = PVPanicEvtDeviceD0Entry;
pnpPowerCallbacks.EvtDeviceD0Exit = PVPanicEvtDeviceD0Exit;
WdfDeviceInitSetPnpPowerEventCallbacks(DeviceInit, &pnpPowerCallbacks);
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&attributes, DEVICE_CONTEXT);
WDF_FILEOBJECT_CONFIG_INIT(&fileConfig, PVPanicEvtDeviceFileCreate,
WDF_NO_EVENT_CALLBACK, WDF_NO_EVENT_CALLBACK);
WdfDeviceInitSetFileObjectConfig(DeviceInit, &fileConfig,
WDF_NO_OBJECT_ATTRIBUTES);
status = WdfDeviceCreate(&DeviceInit, &attributes, &device);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_INIT,
"WdfDeviceCreate failed: %!STATUS!", status);
return status;
}
status = WdfDeviceCreateSymbolicLink(device, &dosDeviceName);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_INIT,
"WdfDeviceCreateSymbolicLink failed: %!STATUS!", status);
return status;
}
WDF_IO_QUEUE_CONFIG_INIT(&queueConfig, WdfIoQueueDispatchSequential);
queueConfig.EvtIoDeviceControl = PVPanicEvtQueueDeviceControl;
context = GetDeviceContext(device);
status = WdfIoQueueCreate(device,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&context->IoctlQueue);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_INIT,
"WdfIoQueueCreate failed: %!STATUS!", status);
return status;
}
status = WdfDeviceConfigureRequestDispatching(device,
context->IoctlQueue,
WdfRequestTypeDeviceControl);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_INIT,
"WdfDeviceConfigureRequestDispatching failed: %!STATUS!", status);
return status;
}
TraceEvents(TRACE_LEVEL_VERBOSE, DBG_INIT, "<-- %!FUNC!");
return status;
}
NTSTATUS
XenUsb_EvtDriverDeviceAdd(WDFDRIVER driver, PWDFDEVICE_INIT device_init)
{
NTSTATUS status;
WDF_CHILD_LIST_CONFIG child_list_config;
WDFDEVICE device;
PXENUSB_DEVICE_DATA xudd;
//UNICODE_STRING reference;
WDF_OBJECT_ATTRIBUTES device_attributes;
PNP_BUS_INFORMATION pbi;
WDF_PNPPOWER_EVENT_CALLBACKS pnp_power_callbacks;
WDF_DEVICE_POWER_CAPABILITIES power_capabilities;
WDF_IO_QUEUE_CONFIG queue_config;
UCHAR pnp_minor_functions[] = { IRP_MN_QUERY_INTERFACE };
DECLARE_CONST_UNICODE_STRING(symbolicname_name, L"SymbolicName");
WDFSTRING symbolicname_value_wdfstring;
WDFKEY device_key;
UNICODE_STRING symbolicname_value;
UNREFERENCED_PARAMETER(driver);
FUNCTION_ENTER();
WDF_PNPPOWER_EVENT_CALLBACKS_INIT(&pnp_power_callbacks);
pnp_power_callbacks.EvtDeviceD0Entry = XenUsb_EvtDeviceD0Entry;
pnp_power_callbacks.EvtDeviceD0Exit = XenUsb_EvtDeviceD0Exit;
WdfDeviceInitSetPnpPowerEventCallbacks(device_init, &pnp_power_callbacks);
status = WdfDeviceInitAssignWdmIrpPreprocessCallback(device_init, XenUsb_EvtDeviceWdmIrpPreprocessQUERY_INTERFACE,
IRP_MJ_PNP, pnp_minor_functions, ARRAY_SIZE(pnp_minor_functions));
if (!NT_SUCCESS(status))
{
return status;
}
WdfDeviceInitSetDeviceType(device_init, FILE_DEVICE_BUS_EXTENDER);
WdfDeviceInitSetExclusive(device_init, FALSE);
WDF_CHILD_LIST_CONFIG_INIT(&child_list_config, sizeof(XENUSB_PDO_IDENTIFICATION_DESCRIPTION), XenUsb_EvtChildListCreateDevice);
child_list_config.EvtChildListScanForChildren = XenUsb_EvtChildListScanForChildren;
WdfFdoInitSetDefaultChildListConfig(device_init, &child_list_config, WDF_NO_OBJECT_ATTRIBUTES);
WdfDeviceInitSetIoType(device_init, WdfDeviceIoBuffered);
WdfDeviceInitSetPowerNotPageable(device_init);
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&device_attributes, XENUSB_DEVICE_DATA);
status = WdfDeviceCreate(&device_init, &device_attributes, &device);
if (!NT_SUCCESS(status))
{
FUNCTION_MSG("Error creating device %08x\n", status);
return status;
}
xudd = GetXudd(device);
xudd->pdo = WdfDeviceWdmGetPhysicalDevice(device);
xudd->child_list = WdfFdoGetDefaultChildList(device);
KeInitializeEvent(&xudd->backend_event, SynchronizationEvent, FALSE);
InitializeListHead(&xudd->partial_pvurb_queue);
InitializeListHead(&xudd->partial_pvurb_ring);
KeInitializeDpc(&xudd->event_dpc, XenUsb_HandleEventDpc, xudd);
KeInitializeSpinLock(&xudd->urb_ring_lock);
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE(&queue_config, WdfIoQueueDispatchParallel);
queue_config.PowerManaged = FALSE; /* ? */
queue_config.EvtIoDeviceControl = XenUsb_EvtIoDeviceControl;
queue_config.EvtIoInternalDeviceControl = XenUsb_EvtIoInternalDeviceControl;
queue_config.EvtIoDefault = XenUsb_EvtIoDefault;
status = WdfIoQueueCreate(device, &queue_config, WDF_NO_OBJECT_ATTRIBUTES, &xudd->io_queue);
if (!NT_SUCCESS(status)) {
FUNCTION_MSG("Error creating io_queue 0x%x\n", status);
return status;
}
WDF_IO_QUEUE_CONFIG_INIT(&queue_config, WdfIoQueueDispatchParallel);
queue_config.PowerManaged = FALSE; /* ? */
//queue_config.EvtIoDeviceControl = XenUsb_EvtIoDeviceControl;
queue_config.EvtIoInternalDeviceControl = XenUsb_EvtIoInternalDeviceControl_PVURB;
//queue_config.EvtIoDefault = XenUsb_EvtIoDefault;
queue_config.Settings.Parallel.NumberOfPresentedRequests = USB_URB_RING_SIZE; /* the queue controls if the ring is full */
status = WdfIoQueueCreate(device, &queue_config, WDF_NO_OBJECT_ATTRIBUTES, &xudd->pvurb_queue);
if (!NT_SUCCESS(status)) {
FUNCTION_MSG("Error creating urb_queue 0x%x\n", status);
return status;
}
WDF_DEVICE_POWER_CAPABILITIES_INIT(&power_capabilities);
power_capabilities.DeviceD1 = WdfTrue;
power_capabilities.WakeFromD1 = WdfTrue;
power_capabilities.DeviceWake = PowerDeviceD1;
power_capabilities.DeviceState[PowerSystemWorking] = PowerDeviceD0;
power_capabilities.DeviceState[PowerSystemSleeping1] = PowerDeviceD1;
power_capabilities.DeviceState[PowerSystemSleeping2] = PowerDeviceD2;
power_capabilities.DeviceState[PowerSystemSleeping3] = PowerDeviceD2;
power_capabilities.DeviceState[PowerSystemHibernate] = PowerDeviceD3;
power_capabilities.DeviceState[PowerSystemShutdown] = PowerDeviceD3;
WdfDeviceSetPowerCapabilities(device, &power_capabilities);
WdfDeviceSetSpecialFileSupport(device, WdfSpecialFilePaging, TRUE);
WdfDeviceSetSpecialFileSupport(device, WdfSpecialFileHibernation, TRUE);
WdfDeviceSetSpecialFileSupport(device, WdfSpecialFileDump, TRUE);
pbi.BusTypeGuid = GUID_BUS_TYPE_XEN;
pbi.LegacyBusType = PNPBus;
pbi.BusNumber = 0;
WdfDeviceSetBusInformationForChildren(device, &pbi);
status = WdfDeviceCreateDeviceInterface(device, &GUID_DEVINTERFACE_USB_HOST_CONTROLLER, NULL);
if (!NT_SUCCESS(status)) {
FUNCTION_MSG("WdfDeviceCreateDeviceInterface returned %08x\n");
return status;
}
/* USB likes to have a registry key with the symbolic link name in it */
status = WdfStringCreate(NULL, WDF_NO_OBJECT_ATTRIBUTES, &symbolicname_value_wdfstring);
if (!NT_SUCCESS(status)) {
FUNCTION_MSG("WdfStringCreate returned %08x\n");
return status;
}
status = WdfDeviceRetrieveDeviceInterfaceString(device, &GUID_DEVINTERFACE_USB_HOST_CONTROLLER, NULL, symbolicname_value_wdfstring);
if (!NT_SUCCESS(status)) {
FUNCTION_MSG("WdfDeviceRetrieveDeviceInterfaceString returned %08x\n");
return status;
}
WdfStringGetUnicodeString(symbolicname_value_wdfstring, &symbolicname_value);
status = WdfDeviceOpenRegistryKey(device, PLUGPLAY_REGKEY_DEVICE, KEY_SET_VALUE, WDF_NO_OBJECT_ATTRIBUTES, &device_key);
if (!NT_SUCCESS(status)) {
FUNCTION_MSG("WdfDeviceOpenRegistryKey returned %08x\n");
return status;
}
WdfRegistryAssignUnicodeString(device_key, &symbolicname_name, &symbolicname_value);
FUNCTION_EXIT();
return status;
}
NTSTATUS
KbFilter_EvtDeviceAdd(
IN WDFDRIVER Driver,
IN PWDFDEVICE_INIT DeviceInit
)
/*++
Routine Description:
EvtDeviceAdd is called by the framework in response to AddDevice
call from the PnP manager. Here you can query the device properties
using WdfFdoInitWdmGetPhysicalDevice/IoGetDeviceProperty and based
on that, decide to create a filter device object and attach to the
function stack.
If you are not interested in filtering this particular instance of the
device, you can just return STATUS_SUCCESS without creating a framework
device.
Arguments:
Driver - Handle to a framework driver object created in DriverEntry
DeviceInit - Pointer to a framework-allocated WDFDEVICE_INIT structure.
Return Value:
NTSTATUS
--*/
{
WDF_OBJECT_ATTRIBUTES deviceAttributes;
NTSTATUS status;
WDFDEVICE hDevice;
WDFQUEUE hQueue;
PDEVICE_EXTENSION filterExt;
WDF_IO_QUEUE_CONFIG ioQueueConfig;
UNREFERENCED_PARAMETER(Driver);
PAGED_CODE();
DebugPrint(("Enter FilterEvtDeviceAdd \n"));
//
// Tell the framework that you are filter driver. Framework
// takes care of inherting all the device flags & characterstics
// from the lower device you are attaching to.
//
WdfFdoInitSetFilter(DeviceInit);
WdfDeviceInitSetDeviceType(DeviceInit, FILE_DEVICE_KEYBOARD);
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&deviceAttributes, DEVICE_EXTENSION);
//
// Create a framework device object. This call will in turn create
// a WDM deviceobject, attach to the lower stack and set the
// appropriate flags and attributes.
//
status = WdfDeviceCreate(&DeviceInit, &deviceAttributes, &hDevice);
if (!NT_SUCCESS(status)) {
DebugPrint(("WdfDeviceCreate failed with status code 0x%x\n", status));
return status;
}
filterExt = FilterGetData(hDevice);
//
// Configure the default queue to be Parallel. Do not use sequential queue
// if this driver is going to be filtering PS2 ports because it can lead to
// deadlock. The PS2 port driver sends a request to the top of the stack when it
// receives an ioctl request and waits for it to be completed. If you use a
// a sequential queue, this request will be stuck in the queue because of the
// outstanding ioctl request sent earlier to the port driver.
//
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE(&ioQueueConfig,
WdfIoQueueDispatchParallel);
//
// Framework by default creates non-power managed queues for
// filter drivers.
//
ioQueueConfig.EvtIoInternalDeviceControl = KbFilter_EvtIoInternalDeviceControl;
status = WdfIoQueueCreate(hDevice,
&ioQueueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
WDF_NO_HANDLE // pointer to default queue
);
if (!NT_SUCCESS(status)) {
DebugPrint( ("WdfIoQueueCreate failed 0x%x\n", status));
return status;
}
//
// Create a new queue to handle IOCTLs that will be forwarded to us from
// the rawPDO.
//
WDF_IO_QUEUE_CONFIG_INIT(&ioQueueConfig,
WdfIoQueueDispatchParallel);
//
// Framework by default creates non-power managed queues for
// filter drivers.
//
ioQueueConfig.EvtIoDeviceControl = KbFilter_EvtIoDeviceControlFromRawPdo;
status = WdfIoQueueCreate(hDevice,
&ioQueueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&hQueue
);
if (!NT_SUCCESS(status)) {
DebugPrint( ("WdfIoQueueCreate failed 0x%x\n", status));
return status;
}
filterExt->rawPdoQueue = hQueue;
//
// Create a RAW pdo so we can provide a sideband communication with
// the application. Please note that not filter drivers desire to
// produce such a communication and not all of them are contrained
// by other filter above which prevent communication thru the device
// interface exposed by the main stack. So use this only if absolutely
// needed. Also look at the toaster filter driver sample for an alternate
// approach to providing sideband communication.
//
status = KbFiltr_CreateRawPdo(hDevice, ++InstanceNo);
return status;
}
NTSTATUS
OnDeviceAdd(
_In_ WDFDRIVER FxDriver,
_Inout_ PWDFDEVICE_INIT FxDeviceInit
)
/*++
Routine Description:
This routine creates the device object for an SPB
controller and the device's child objects.
Arguments:
FxDriver - the WDF driver object handle
FxDeviceInit - information about the PDO that we are loading on
Return Value:
Status
--*/
{
//FuncEntry(TRACE_FLAG_WDFLOADING);
PDEVICE_CONTEXT pDevice;
NTSTATUS status;
UNREFERENCED_PARAMETER(FxDriver);
//
// Setup PNP/Power callbacks.
//
{
WDF_PNPPOWER_EVENT_CALLBACKS pnpCallbacks;
WDF_PNPPOWER_EVENT_CALLBACKS_INIT(&pnpCallbacks);
pnpCallbacks.EvtDevicePrepareHardware = OnPrepareHardware;
pnpCallbacks.EvtDeviceReleaseHardware = OnReleaseHardware;
pnpCallbacks.EvtDeviceD0Entry = OnD0Entry;
pnpCallbacks.EvtDeviceD0Exit = OnD0Exit;
WdfDeviceInitSetPnpPowerEventCallbacks(FxDeviceInit, &pnpCallbacks);
}
//
// Prepare for file object handling.
//
{
WDF_FILEOBJECT_CONFIG fileObjectConfig;
WDF_FILEOBJECT_CONFIG_INIT(
&fileObjectConfig,
nullptr,
nullptr,
OnFileCleanup);
WDF_OBJECT_ATTRIBUTES fileObjectAttributes;
WDF_OBJECT_ATTRIBUTES_INIT(&fileObjectAttributes);
WdfDeviceInitSetFileObjectConfig(
FxDeviceInit,
&fileObjectConfig,
&fileObjectAttributes);
}
//
// Set request attributes.
//
{
WDF_OBJECT_ATTRIBUTES attributes;
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(
&attributes,
REQUEST_CONTEXT);
WdfDeviceInitSetRequestAttributes(FxDeviceInit, &attributes);
}
//
// Create the device.
//
{
WDFDEVICE fxDevice;
WDF_OBJECT_ATTRIBUTES deviceAttributes;
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&deviceAttributes, DEVICE_CONTEXT);
status = WdfDeviceCreate(
&FxDeviceInit,
&deviceAttributes,
&fxDevice);
if (!NT_SUCCESS(status))
{
Trace(
TRACE_LEVEL_ERROR,
TRACE_FLAG_WDFLOADING,
"Error creating WDFDEVICE - %!STATUS!",
status);
goto exit;
}
pDevice = GetDeviceContext(fxDevice);
NT_ASSERT(pDevice != nullptr);
pDevice->FxDevice = fxDevice;
}
//
// Ensure device is disable-able
//
{
WDF_DEVICE_STATE deviceState;
WDF_DEVICE_STATE_INIT(&deviceState);
deviceState.NotDisableable = WdfFalse;
WdfDeviceSetDeviceState(pDevice->FxDevice, &deviceState);
}
//
// Create queues to handle IO
//
{
WDF_IO_QUEUE_CONFIG queueConfig;
WDFQUEUE queue;
//
// Top-level queue
//
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE(
&queueConfig,
WdfIoQueueDispatchParallel);
queueConfig.EvtIoDefault = OnTopLevelIoDefault;
queueConfig.PowerManaged = WdfFalse;
status = WdfIoQueueCreate(
pDevice->FxDevice,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&queue
);
if (!NT_SUCCESS(status))
{
Trace(
TRACE_LEVEL_ERROR,
TRACE_FLAG_WDFLOADING,
"Error creating top-level IO queue - %!STATUS!",
status);
goto exit;
}
//
// Sequential SPB queue
//
WDF_IO_QUEUE_CONFIG_INIT(
&queueConfig,
WdfIoQueueDispatchSequential);
queueConfig.EvtIoRead = OnIoRead;
queueConfig.EvtIoWrite = OnIoWrite;
queueConfig.EvtIoDeviceControl = OnIoDeviceControl;
queueConfig.PowerManaged = WdfFalse;
status = WdfIoQueueCreate(
pDevice->FxDevice,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&pDevice->SpbQueue
);
if (!NT_SUCCESS(status))
{
Trace(
TRACE_LEVEL_ERROR,
TRACE_FLAG_WDFLOADING,
"Error creating SPB IO queue - %!STATUS!",
status);
goto exit;
}
}
//
// Create a symbolic link.
//
{
DECLARE_UNICODE_STRING_SIZE(symbolicLinkName, 128);
status = RtlUnicodeStringPrintf(
&symbolicLinkName, L"%ws",
sensy_SYMBOLIC_NAME);
if (!NT_SUCCESS(status))
{
Trace(
TRACE_LEVEL_ERROR,
TRACE_FLAG_WDFLOADING,
"Error creating symbolic link string for device "
"- %!STATUS!",
status);
goto exit;
}
status = WdfDeviceCreateSymbolicLink(
pDevice->FxDevice,
&symbolicLinkName);
if (!NT_SUCCESS(status))
{
Trace(
TRACE_LEVEL_ERROR,
TRACE_FLAG_WDFLOADING,
"Error creating symbolic link for device "
"- %!STATUS!",
status);
goto exit;
}
}
//
// Retrieve registry settings.
//
{
WDFKEY key = NULL;
WDFKEY subkey = NULL;
ULONG connectInterrupt = 0;
NTSTATUS settingStatus;
DECLARE_CONST_UNICODE_STRING(subkeyName, L"Settings");
DECLARE_CONST_UNICODE_STRING(connectInterruptName, L"ConnectInterrupt");
settingStatus = WdfDeviceOpenRegistryKey(
pDevice->FxDevice,
PLUGPLAY_REGKEY_DEVICE,
KEY_READ,
WDF_NO_OBJECT_ATTRIBUTES,
&key);
if (!NT_SUCCESS(settingStatus))
{
Trace(
TRACE_LEVEL_WARNING,
TRACE_FLAG_WDFLOADING,
"Error opening device registry key - %!STATUS!",
settingStatus);
}
if (NT_SUCCESS(settingStatus))
{
settingStatus = WdfRegistryOpenKey(
key,
&subkeyName,
KEY_READ,
WDF_NO_OBJECT_ATTRIBUTES,
&subkey);
if (!NT_SUCCESS(settingStatus))
{
Trace(
TRACE_LEVEL_WARNING,
TRACE_FLAG_WDFLOADING,
"Error opening registry subkey for 'Settings' - %!STATUS!",
settingStatus);
}
}
if (NT_SUCCESS(settingStatus))
{
settingStatus = WdfRegistryQueryULong(
subkey,
&connectInterruptName,
&connectInterrupt);
if (!NT_SUCCESS(settingStatus))
{
Trace(
TRACE_LEVEL_WARNING,
TRACE_FLAG_WDFLOADING,
"Error querying registry value for 'ConnectInterrupt' - %!STATUS!",
settingStatus);
}
}
if (key != NULL)
{
WdfRegistryClose(key);
}
if (subkey != NULL)
{
WdfRegistryClose(subkey);
}
pDevice->ConnectInterrupt = (connectInterrupt == 1);
}
exit:
//FuncExit(TRACE_FLAG_WDFLOADING);
return status;
}
NTSTATUS VioCryptDeviceAdd(IN WDFDRIVER Driver, IN PWDFDEVICE_INIT DeviceInit)
{
NTSTATUS status;
WDFDEVICE device;
WDF_PNPPOWER_EVENT_CALLBACKS pnpPowerCallbacks;
WDF_OBJECT_ATTRIBUTES attributes;
WDFQUEUE queue;
WDF_IO_QUEUE_CONFIG queueConfig;
WDF_INTERRUPT_CONFIG interruptConfig;
PDEVICE_CONTEXT context;
UNREFERENCED_PARAMETER(Driver);
Trace(TRACE_LEVEL_VERBOSE, "[%s] -->", __FUNCTION__);
PAGED_CODE();
WDF_PNPPOWER_EVENT_CALLBACKS_INIT(&pnpPowerCallbacks);
pnpPowerCallbacks.EvtDevicePrepareHardware = VioCryptDevicePrepareHardware;
pnpPowerCallbacks.EvtDeviceReleaseHardware = VioCryptDeviceReleaseHardware;
pnpPowerCallbacks.EvtDeviceD0Entry = VioCryptDeviceD0Entry;
pnpPowerCallbacks.EvtDeviceD0Exit = VioCryptDeviceD0Exit;
WdfDeviceInitSetPnpPowerEventCallbacks(DeviceInit, &pnpPowerCallbacks);
WdfDeviceInitSetIoType(DeviceInit, WdfDeviceIoDirect);
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&attributes, DEVICE_CONTEXT);
attributes.EvtCleanupCallback = VioCryptDeviceContextCleanup;
status = WdfDeviceCreate(&DeviceInit, &attributes, &device);
if (!NT_SUCCESS(status))
{
Trace(TRACE_LEVEL_ERROR, "[%s] WdfDeviceCreate failed: status %X", __FUNCTION__, status);
return status;
}
context = GetDeviceContext(device);
RtlZeroMemory(context, sizeof(*context));
InitializeListHead(&context->PendingBuffers);
WDF_INTERRUPT_CONFIG_INIT(&interruptConfig, VioCryptInterruptIsr, VioCryptInterruptDpc);
interruptConfig.EvtInterruptEnable = VioCryptInterruptEnable;
interruptConfig.EvtInterruptDisable = VioCryptInterruptDisable;
status = WdfInterruptCreate(device, &interruptConfig,
WDF_NO_OBJECT_ATTRIBUTES, &context->WdfInterrupt);
if (!NT_SUCCESS(status))
{
Trace(TRACE_LEVEL_ERROR, "[%s] WdfInterruptCreate failed: status %X", __FUNCTION__, status);
return status;
}
WDF_OBJECT_ATTRIBUTES_INIT(&attributes);
attributes.ParentObject = device;
status = WdfSpinLockCreate(&attributes,
&context->VirtQueueLock);
if (!NT_SUCCESS(status))
{
Trace(TRACE_LEVEL_ERROR, "[%s] WdfSpinLockCreate failed: status %X", __FUNCTION__, status);
return status;
}
status = WdfDeviceCreateDeviceInterface(device,
&GUID_DEVINTERFACE_VIOCRYPT, NULL);
if (!NT_SUCCESS(status))
{
Trace(TRACE_LEVEL_ERROR, "[%s] WdfDeviceCreateDeviceInterface failed: status %X", __FUNCTION__, status);
return status;
}
WDF_IO_QUEUE_CONFIG_INIT(&queueConfig, WdfIoQueueDispatchSequential);
queueConfig.EvtIoDeviceControl = VioCryptIoControl;
queueConfig.EvtIoStop = VioCryptIoStop;
queueConfig.AllowZeroLengthRequests = FALSE;
status = WdfIoQueueCreate(device, &queueConfig,
WDF_NO_OBJECT_ATTRIBUTES, &queue);
if (!NT_SUCCESS(status))
{
Trace(TRACE_LEVEL_ERROR, "[%s] WdfIoQueueCreate failed: status %X", __FUNCTION__, status);
return status;
}
status = WdfDeviceConfigureRequestDispatching(device, queue, WdfRequestTypeDeviceControl);
if (!NT_SUCCESS(status))
{
Trace(TRACE_LEVEL_ERROR, "[%s] WdfDeviceConfigureRequestDispatching failed: status %X", __FUNCTION__, status);
return status;
}
Trace(TRACE_LEVEL_VERBOSE, "[%s] <--", __FUNCTION__);
return status;
}
NTSTATUS
HidFx2EvtDeviceAdd(
IN WDFDRIVER Driver,
IN PWDFDEVICE_INIT DeviceInit
)
/*++
Routine Description:
HidFx2EvtDeviceAdd is called by the framework in response to AddDevice
call from the PnP manager. We create and initialize a WDF device object to
represent a new instance of toaster device.
Arguments:
Driver - Handle to a framework driver object created in DriverEntry
DeviceInit - Pointer to a framework-allocated WDFDEVICE_INIT structure.
Return Value:
NTSTATUS
--*/
{
NTSTATUS status = STATUS_SUCCESS;
WDF_IO_QUEUE_CONFIG queueConfig;
WDF_OBJECT_ATTRIBUTES attributes;
WDFDEVICE hDevice;
PDEVICE_EXTENSION devContext = NULL;
WDFQUEUE queue;
WDF_PNPPOWER_EVENT_CALLBACKS pnpPowerCallbacks;
WDF_TIMER_CONFIG timerConfig;
WDFTIMER timerHandle;
UNREFERENCED_PARAMETER(Driver);
PAGED_CODE();
TraceEvents(TRACE_LEVEL_INFORMATION, DBG_PNP,
"HidFx2EvtDeviceAdd called\n");
//
// Tell framework this is a filter driver. Filter drivers by default are
// not power policy owners. This works well for this driver because
// HIDclass driver is the power policy owner for HID minidrivers.
//
WdfFdoInitSetFilter(DeviceInit);
//
// Initialize pnp-power callbacks, attributes and a context area for the device object.
//
//
WDF_PNPPOWER_EVENT_CALLBACKS_INIT(&pnpPowerCallbacks);
//
// For usb devices, PrepareHardware callback is the to place select the
// interface and configure the device.
//
pnpPowerCallbacks.EvtDevicePrepareHardware = HidFx2EvtDevicePrepareHardware;
//
// These two callbacks start and stop the wdfusb pipe continuous reader
// as we go in and out of the D0-working state.
//
pnpPowerCallbacks.EvtDeviceD0Entry = HidFx2EvtDeviceD0Entry;
pnpPowerCallbacks.EvtDeviceD0Exit = HidFx2EvtDeviceD0Exit;
WdfDeviceInitSetPnpPowerEventCallbacks(DeviceInit, &pnpPowerCallbacks);
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&attributes, DEVICE_EXTENSION);
//
// Create a framework device object.This call will in turn create
// a WDM device object, attach to the lower stack, and set the
// appropriate flags and attributes.
//
status = WdfDeviceCreate(&DeviceInit, &attributes, &hDevice);
if (!NT_SUCCESS(status)) {
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfDeviceCreate failed with status code 0x%x\n", status);
return status;
}
devContext = GetDeviceContext(hDevice);
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE(&queueConfig, WdfIoQueueDispatchParallel);
queueConfig.EvtIoInternalDeviceControl = HidFx2EvtInternalDeviceControl;
status = WdfIoQueueCreate(hDevice,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&queue
);
if (!NT_SUCCESS (status)) {
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfIoQueueCreate failed 0x%x\n", status);
return status;
}
//
// Register a manual I/O queue for handling Interrupt Message Read Requests.
// This queue will be used for storing Requests that need to wait for an
// interrupt to occur before they can be completed.
//
WDF_IO_QUEUE_CONFIG_INIT(&queueConfig, WdfIoQueueDispatchManual);
//
// This queue is used for requests that dont directly access the device. The
// requests in this queue are serviced only when the device is in a fully
// powered state and sends an interrupt. So we can use a non-power managed
// queue to park the requests since we dont care whether the device is idle
// or fully powered up.
//
queueConfig.PowerManaged = WdfFalse;
status = WdfIoQueueCreate(hDevice,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&devContext->InterruptMsgQueue
);
if (!NT_SUCCESS(status)) {
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfIoQueueCreate failed 0x%x\n", status);
return status;
}
//
// Create a timer to handle debouncing of switchpack
//
WDF_TIMER_CONFIG_INIT(
&timerConfig,
HidFx2EvtTimerFunction
);
timerConfig.AutomaticSerialization = FALSE;
WDF_OBJECT_ATTRIBUTES_INIT(&attributes);
attributes.ParentObject = hDevice;
status = WdfTimerCreate(
&timerConfig,
&attributes,
&timerHandle
);
if (!NT_SUCCESS(status)) {
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfTimerCreate failed status:0x%x\n", status);
return status;
}
devContext->DebounceTimer = timerHandle;
return status;
}
NTSTATUS
OnDeviceAdd(
IN WDFDRIVER Driver,
IN PWDFDEVICE_INIT DeviceInit
)
/*++
Routine Description:
OnDeviceAdd is called by the framework in response to AddDevice
call from the PnP manager when a device is found. We create and
initialize a WDF device object to represent the new instance of
an touch device. Per-device objects are also instantiated.
Arguments:
Driver - Handle to a framework driver object created in DriverEntry
DeviceInit - Pointer to a framework-allocated WDFDEVICE_INIT structure.
Return Value:
NTSTATUS indicating success or failure
--*/
{
WDF_OBJECT_ATTRIBUTES attributes;
PDEVICE_EXTENSION devContext;
WDFDEVICE fxDevice;
WDF_INTERRUPT_CONFIG interruptConfig;
WDF_PNPPOWER_EVENT_CALLBACKS pnpPowerCallbacks;
WDF_IO_QUEUE_CONFIG queueConfig;
NTSTATUS status;
UNREFERENCED_PARAMETER(Driver);
PAGED_CODE();
//
// Relinquish power policy ownership because HIDCLASS acts a power
// policy owner for ther HID stack.
//
WdfDeviceInitSetPowerPolicyOwnership(DeviceInit, FALSE);
//
// This driver handles D0 Entry and Exit to power on and off the
// controller. It also handles prepare/release hardware so that it
// can acquire and free SPB resources needed to communicate with the
// touch controller.
//
WDF_PNPPOWER_EVENT_CALLBACKS_INIT(&pnpPowerCallbacks);
pnpPowerCallbacks.EvtDeviceD0Entry = OnD0Entry;
pnpPowerCallbacks.EvtDeviceD0Exit = OnD0Exit;
pnpPowerCallbacks.EvtDevicePrepareHardware = OnPrepareHardware;
pnpPowerCallbacks.EvtDeviceReleaseHardware = OnReleaseHardware;
WdfDeviceInitSetPnpPowerEventCallbacks(DeviceInit, &pnpPowerCallbacks);
//
// Create a framework device object. This call will in turn create
// a WDM device object, attach to the lower stack, and set the
// appropriate flags and attributes.
//
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&attributes, DEVICE_EXTENSION);
status = WdfDeviceCreate(&DeviceInit, &attributes, &fxDevice);
if (!NT_SUCCESS(status))
{
Trace(
TRACE_LEVEL_ERROR,
TRACE_FLAG_INIT,
"WdfDeviceCreate failed - %!STATUS!",
status);
goto exit;
}
devContext = GetDeviceContext(fxDevice);
devContext->FxDevice = fxDevice;
devContext->InputMode = MODE_MULTI_TOUCH;
//
// Create a parallel dispatch queue to handle requests from HID Class
//
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE(
&queueConfig,
WdfIoQueueDispatchParallel);
queueConfig.EvtIoInternalDeviceControl = OnInternalDeviceControl;
queueConfig.PowerManaged = WdfFalse;
status = WdfIoQueueCreate(
fxDevice,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&devContext->DefaultQueue);
if (!NT_SUCCESS (status))
{
Trace(
TRACE_LEVEL_ERROR,
TRACE_FLAG_INIT,
"Error creating WDF default queue - %!STATUS!",
status);
goto exit;
}
//
// Register a manual I/O queue for Read Requests. This queue will be used
// for storing HID read requests until touch data is available to
// complete them.
//
WDF_IO_QUEUE_CONFIG_INIT(&queueConfig, WdfIoQueueDispatchManual);
queueConfig.PowerManaged = WdfFalse;
status = WdfIoQueueCreate(
fxDevice,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&devContext->PingPongQueue);
if (!NT_SUCCESS(status))
{
Trace(
TRACE_LEVEL_ERROR,
TRACE_FLAG_INIT,
"Error creating WDF read request queue - %!STATUS!",
status);
goto exit;
}
//
// Register one last manual I/O queue for parking HIDClass's idle power
// requests. This queue stores idle requests until they're cancelled,
// and could be used to complete a wait/wake request.
//
WDF_IO_QUEUE_CONFIG_INIT(&queueConfig, WdfIoQueueDispatchManual);
queueConfig.PowerManaged = WdfFalse;
status = WdfIoQueueCreate(
fxDevice,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&devContext->IdleQueue
);
if (!NT_SUCCESS(status))
{
Trace(
TRACE_LEVEL_ERROR,
TRACE_FLAG_INIT,
"Error creating WDF idle request queue - %!STATUS!",
status);
goto exit;
}
//
// Create an interrupt object for hardware notifications
//
WDF_INTERRUPT_CONFIG_INIT(
&interruptConfig,
OnInterruptIsr,
NULL);
interruptConfig.PassiveHandling = TRUE;
status = WdfInterruptCreate(
fxDevice,
&interruptConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&devContext->InterruptObject);
if (!NT_SUCCESS(status))
{
Trace(
TRACE_LEVEL_ERROR,
TRACE_FLAG_INIT,
"Error creating WDF interrupt object - %!STATUS!",
status);
goto exit;
}
exit:
return status;
}
NTSTATUS
FmEvtDeviceAdd(
IN WDFDRIVER Driver,
IN PWDFDEVICE_INIT DeviceInit
)
/*++
Routine Description:
FmEvtDeviceAdd is called by the framework in response to AddDevice
call from the PnP manager. We create and initialize a device object to
represent a new instance of Fm device.
Arguments:
Driver - Handle to a framework driver object created in DriverEntry
DeviceInit - Pointer to a framework-allocated WDFDEVICE_INIT structure.
Return Value:
NTSTATUS
--*/
{
NTSTATUS status = STATUS_SUCCESS;
PFM_DEVICE_DATA fmDeviceData;
WDF_IO_QUEUE_CONFIG queueConfig;
WDF_OBJECT_ATTRIBUTES fdoAttributes;
WDFDEVICE hDevice;
WDFQUEUE defQueue;
UNREFERENCED_PARAMETER(Driver);
KdPrint( ("FmEvtDeviceAdd routine \n"));
PAGED_CODE();
//
// Modem type is serial port.
//
WdfDeviceInitSetDeviceType(DeviceInit, FILE_DEVICE_SERIAL_PORT);
//
// Use Buffered IO.
//
WdfDeviceInitSetIoType(DeviceInit, WdfDeviceIoBuffered);
//
// Specify the size of device extension where we track per device
// context.
//
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&fdoAttributes, FM_DEVICE_DATA);
//
// Register a cleanup callback on the device to free up some resources at the
// time the device is deleted.
//
fdoAttributes.EvtCleanupCallback = FmDeviceCleanup;
//
// By opting for SynchronizationScopeDevice, we tell the framework to
// synchronize callbacks events of all the objects directly associated
// with the device. In this driver, we will associate queues.
// By doing that we don't have to worrry about synchronizing
// access to device-context by various io Events.
// Framework will serialize them by using an internal device-lock.
//
fdoAttributes.SynchronizationScope = WdfSynchronizationScopeDevice;
//
// Create a framework device object.This call will inturn create
// a WDM deviceobject, attach to the lower stack and set the
// appropriate flags and attributes.
//
status = WdfDeviceCreate(&DeviceInit, &fdoAttributes, &hDevice);
if (!NT_SUCCESS(status)) {
KdPrint( ("WdfDeviceCreate failed with Status code 0x%x\n", status));
return status;
}
//
// Get the DeviceExtension and initialize it.
//
fmDeviceData = FmDeviceDataGet(hDevice);
//
// Tell the Framework that this device will need an interface
//
status = WdfDeviceCreateDeviceInterface(
hDevice,
(LPGUID) &GUID_DEVINTERFACE_MODEM,
NULL
);
if (!NT_SUCCESS (status)) {
KdPrint( ("WdfDeviceCreateDeviceInterface failed 0x%x\n", status));
return status;
}
fmDeviceData->Flags = 0;
status = FmCreateDosDevicesSymbolicLink(hDevice, fmDeviceData);
if (!NT_SUCCESS(status)) {
KdPrint( ("FmCreateDosDevicesSymbolicLink failed with Status code 0x%x\n", status));
return status;
}
//
// Initialize the context
//
fmDeviceData->BaudRate=1200;
fmDeviceData->LineControl = SERIAL_7_DATA | SERIAL_EVEN_PARITY | SERIAL_NONE_PARITY;
//
// Register I/O callbacks to tell the framework that you are interested
// in handling IRP_MJ_READ, IRP_MJ_WRITE, and IRP_MJ_DEVICE_CONTROL requests.
// In case a specific handler is not specified for one of these,
// the request will be dispatched to the EvtIoDefault handler, if any.
// If there is no EvtIoDefault handler, the request will be failed with
// STATUS_INVALID_DEVICE_REQUEST.
// WdfIoQueueDispatchParallel means that we are capable of handling
// all the I/O request simultaneously and we are responsible for protecting
// data that could be accessed by these callbacks simultaneously.
//
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE(&queueConfig,
WdfIoQueueDispatchParallel);
queueConfig.EvtIoRead = FmEvtIoRead;
queueConfig.EvtIoWrite = FmEvtIoWrite;
queueConfig.EvtIoDeviceControl = FmEvtIoDeviceControl;
status = WdfIoQueueCreate(
hDevice,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&defQueue // pointer to default queue
);
if (!NT_SUCCESS (status)) {
//
// We don't need to cleanup symbolic link here. The destroy callback for
// the device object will do it.
//
return status;
}
//
// Create a manual queue to hold pending read requests. By keeping
// them in the queue, framework takes care of cancelling them if the app exits
//
WDF_IO_QUEUE_CONFIG_INIT(&queueConfig,
WdfIoQueueDispatchManual);
status = WdfIoQueueCreate(hDevice,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&fmDeviceData->FmReadQueue
);
if (!NT_SUCCESS (status)) {
KdPrint( ("WdfIoQueueCreate failed 0x%x\n", status));
return status;
}
//
// Create a manual queue to hold pending ioctl wait mask requests. By keeping
// them in the queue, framework takes care of cancelling them if the app exits
//
WDF_IO_QUEUE_CONFIG_INIT(&queueConfig,
WdfIoQueueDispatchManual);
status = WdfIoQueueCreate(hDevice,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&fmDeviceData->FmMaskWaitQueue
);
if (!NT_SUCCESS (status)) {
KdPrint( ("WdfIoQueueCreate failed 0x%x\n", status));
return status;
}
return status;
}
NTSTATUS
SingleCompEvtDeviceAdd(
_In_ WDFDRIVER Driver,
_Inout_ PWDFDEVICE_INIT DeviceInit
)
/*++
Routine Description:
EvtDeviceAdd is called by the KMDF in response to AddDevice call from
the PnP manager.
Arguments:
Driver - Handle to the KMDF driver object created in DriverEntry
DeviceInit - Pointer to a framework-allocated WDFDEVICE_INIT structure.
Return Value:
An NTSTATUS value representing success or failure of the function.
--*/
{
NTSTATUS status;
WDFDEVICE device;
WDF_IO_QUEUE_CONFIG queueConfig;
FDO_DATA *fdoContext = NULL;
ULONG queueIndex = 0;
WDF_OBJECT_ATTRIBUTES objectAttributes;
WDF_PNPPOWER_EVENT_CALLBACKS pnpCallbacks;
PAGED_CODE();
UNREFERENCED_PARAMETER(Driver);
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&objectAttributes, FDO_DATA);
WDF_PNPPOWER_EVENT_CALLBACKS_INIT(&pnpCallbacks);
pnpCallbacks.EvtDeviceD0Entry = SingleCompEvtDeviceD0Entry;
pnpCallbacks.EvtDeviceD0Exit = SingleCompEvtDeviceD0Exit;
WdfDeviceInitSetPnpPowerEventCallbacks(DeviceInit, &pnpCallbacks);
status = WdfDeviceCreate(&DeviceInit, &objectAttributes, &device);
if (!NT_SUCCESS(status)) {
Trace(TRACE_LEVEL_ERROR,
"%!FUNC! - WdfDeviceCreate failed with %!status!.",
status);
goto exit;
}
fdoContext = FdoGetContext(device);
//
// Our initial state is active
//
fdoContext->IsActive = TRUE;
//
// Create three power-managed queues, one each for read, write and IOCTL
// requests. The handles to these power-managed queues are stored in an
// array in the device object context space. When the component becomes idle
// we need to stop our power-managed queues. When the component becomes
// active we need to start them. In those situations, we go through this
// array of power-managed queues and stop or start each queue as
// appropriate. Handles to non-power-managed queues should not be stored in
// this array.
//
WDF_IO_QUEUE_CONFIG_INIT(&queueConfig,
WdfIoQueueDispatchParallel);
queueConfig.EvtIoDeviceControl = SingleCompEvtIoDeviceControl;
//
// By default, Static Driver Verifier (SDV) displays a warning if it
// doesn't find the EvtIoStop callback on a power-managed queue.
// The 'assume' below causes SDV to suppress this warning. If the driver
// has not explicitly set PowerManaged to WdfFalse, the framework creates
// power-managed queues when the device is not a filter driver. Normally
// the EvtIoStop is required for power-managed queues, but for this driver
// it is not needed b/c the driver doesn't hold on to the requests or
// forward them to other drivers. This driver completes the requests
// directly in the queue's handlers. If the EvtIoStop callback is not
// implemented, the framework waits for all driver-owned requests to be
// done before moving in the Dx/sleep states or before removing the
// device, which is the correct behavior for this type of driver.
// If the requests were taking an indeterminate amount of time to complete,
// or if the driver forwarded the requests to a lower driver/another stack,
// the queue should have an EvtIoStop/EvtIoResume.
//
__analysis_assume(queueConfig.EvtIoStop != 0);
status = WdfIoQueueCreate(device,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&(fdoContext->Queues[queueIndex]));
__analysis_assume(queueConfig.EvtIoStop == 0);
if (FALSE == NT_SUCCESS (status)) {
Trace(TRACE_LEVEL_ERROR,
"%!FUNC! - WdfIoQueueCreate for IoDeviceControl failed with %!status!.",
status);
goto exit;
}
status = WdfDeviceConfigureRequestDispatching(device,
fdoContext->Queues[queueIndex],
WdfRequestTypeDeviceControl);
if (FALSE == NT_SUCCESS (status)) {
Trace(TRACE_LEVEL_ERROR,
"%!FUNC! - WdfDeviceConfigureRequestDispatching for "
"WdfRequestTypeDeviceControl failed with %!status!.",
status);
goto exit;
}
++queueIndex;
WDF_IO_QUEUE_CONFIG_INIT(&queueConfig,
WdfIoQueueDispatchParallel);
queueConfig.EvtIoRead = SingleCompEvtIoRead;
//
// By default, Static Driver Verifier (SDV) displays a warning if it
// doesn't find the EvtIoStop callback on a power-managed queue.
// The 'assume' below causes SDV to suppress this warning. If the driver
// has not explicitly set PowerManaged to WdfFalse, the framework creates
// power-managed queues when the device is not a filter driver. Normally
// the EvtIoStop is required for power-managed queues, but for this driver
// it is not needed b/c the driver doesn't hold on to the requests or
// forward them to other drivers. This driver completes the requests
// directly in the queue's handlers. If the EvtIoStop callback is not
// implemented, the framework waits for all driver-owned requests to be
// done before moving in the Dx/sleep states or before removing the
// device, which is the correct behavior for this type of driver.
// If the requests were taking an indeterminate amount of time to complete,
// or if the driver forwarded the requests to a lower driver/another stack,
// the queue should have an EvtIoStop/EvtIoResume.
//
__analysis_assume(queueConfig.EvtIoStop != 0);
status = WdfIoQueueCreate(device,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&(fdoContext->Queues[queueIndex]));
__analysis_assume(queueConfig.EvtIoStop == 0);
if (FALSE == NT_SUCCESS (status)) {
Trace(TRACE_LEVEL_ERROR,
"%!FUNC! - WdfIoQueueCreate for IoRead failed with %!status!.",
status);
goto exit;
}
status = WdfDeviceConfigureRequestDispatching(device,
fdoContext->Queues[queueIndex],
WdfRequestTypeRead);
if (FALSE == NT_SUCCESS (status)) {
Trace(TRACE_LEVEL_ERROR,
"%!FUNC! - WdfDeviceConfigureRequestDispatching for "
"WdfRequestTypeRead failed with %!status!.",
status);
goto exit;
}
++queueIndex;
WDF_IO_QUEUE_CONFIG_INIT(&queueConfig,
WdfIoQueueDispatchParallel);
queueConfig.EvtIoWrite = SingleCompEvtIoWrite;
//
// By default, Static Driver Verifier (SDV) displays a warning if it
// doesn't find the EvtIoStop callback on a power-managed queue.
// The 'assume' below causes SDV to suppress this warning. If the driver
// has not explicitly set PowerManaged to WdfFalse, the framework creates
// power-managed queues when the device is not a filter driver. Normally
// the EvtIoStop is required for power-managed queues, but for this driver
// it is not needed b/c the driver doesn't hold on to the requests or
// forward them to other drivers. This driver completes the requests
// directly in the queue's handlers. If the EvtIoStop callback is not
// implemented, the framework waits for all driver-owned requests to be
// done before moving in the Dx/sleep states or before removing the
// device, which is the correct behavior for this type of driver.
// If the requests were taking an indeterminate amount of time to complete,
// or if the driver forwarded the requests to a lower driver/another stack,
// the queue should have an EvtIoStop/EvtIoResume.
//
__analysis_assume(queueConfig.EvtIoStop != 0);
status = WdfIoQueueCreate(device,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&(fdoContext->Queues[queueIndex]));
__analysis_assume(queueConfig.EvtIoStop == 0);
if (FALSE == NT_SUCCESS (status)) {
Trace(TRACE_LEVEL_ERROR,
"%!FUNC! - WdfIoQueueCreate for IoWrite failed with %!status!.",
status);
goto exit;
}
status = WdfDeviceConfigureRequestDispatching(device,
fdoContext->Queues[queueIndex],
WdfRequestTypeWrite);
if (FALSE == NT_SUCCESS (status)) {
Trace(TRACE_LEVEL_ERROR,
"%!FUNC! - WdfDeviceConfigureRequestDispatching for "
"WdfRequestTypeWrite failed with %!status!.",
status);
goto exit;
}
++queueIndex;
ASSERT(queueIndex == QUEUE_COUNT);
status = AssignS0IdleSettings(device);
if (!NT_SUCCESS(status)) {
goto exit;
}
//
// If you need to talk to hardware to figure out what F-states are
// applicable this can be done in EvtSelfManagedIoInit
// (but no later than that). EvtSelfManagedIoInit gets invoked after
// EvtPrepareHardware so you'd have chance to initialize your hardware.
//
status = AssignPowerFrameworkSettings(device);
if (!NT_SUCCESS(status)) {
goto exit;
}
//
// Create a device interface so that applications can open a handle to this
// device.
//
status = WdfDeviceCreateDeviceInterface(device,
&GUID_DEVINTERFACE_POWERFX,
NULL /* ReferenceString */);
if (FALSE == NT_SUCCESS(status)) {
Trace(TRACE_LEVEL_ERROR,
"%!FUNC! - WdfDeviceCreateDeviceInterface failed with %!status!.",
status);
goto exit;
}
//
// Initialize the hardware simulator
//
status = HwSimInitialize(device);
if (FALSE == NT_SUCCESS(status)) {
goto exit;
}
exit:
return status;
}
//HidFx2EvtDeviceAdd is called by the framework in response to AddDevicecall from the PnP manager.
//We create and initialize a WDF device object to represent a new instance of device.
//
NTSTATUS HidFx2EvtDeviceAdd(_In_ WDFDRIVER hDriver, _Inout_ PWDFDEVICE_INIT pDeviceInit)
{
NTSTATUS status = STATUS_SUCCESS;
WDF_IO_QUEUE_CONFIG queueConfig;
WDF_OBJECT_ATTRIBUTES attributes;
WDFDEVICE hDevice;
PDEVICE_EXTENSION pDevContext = NULL;
WDFQUEUE hQueue;
WDF_PNPPOWER_EVENT_CALLBACKS pnpPowerCallbacks;
WDF_TIMER_CONFIG timerConfig;
WDFTIMER hTimer;
UNREFERENCED_PARAMETER(hDriver);
PAGED_CODE();
TraceVerbose(DBG_PNP, "(%!FUNC!) Enter\n");
// Tell framework this is a filter driver.
WdfFdoInitSetFilter(pDeviceInit);
// Initialize pnp-power callbacks, attributes and a context area for the device object.
WDF_PNPPOWER_EVENT_CALLBACKS_INIT(&pnpPowerCallbacks);
// For usb devices, PrepareHardware callback is the to place select the interface and configure the device.
pnpPowerCallbacks.EvtDevicePrepareHardware = HidFx2EvtDevicePrepareHardware;
// These two callbacks start and stop the wdfusb pipe continuous reader as we go in and out of the D0-working state.
pnpPowerCallbacks.EvtDeviceD0Entry = HidFx2EvtDeviceD0Entry;
pnpPowerCallbacks.EvtDeviceD0Exit = HidFx2EvtDeviceD0Exit;
WdfDeviceInitSetPnpPowerEventCallbacks(pDeviceInit, &pnpPowerCallbacks);
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&attributes, DEVICE_EXTENSION);
// Create a framework device object.This call will in turn create a WDM device object, attach to the lower stack.
status = WdfDeviceCreate(&pDeviceInit, &attributes, &hDevice);
if (!NT_SUCCESS(status))
{
TraceErr(DBG_PNP, "(%!FUNC!) WdfDeviceCreate failed with status code %!STATUS!\n", status);
return status;
}
pDevContext = GetDeviceContext(hDevice);
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE(&queueConfig, WdfIoQueueDispatchParallel);
queueConfig.EvtIoInternalDeviceControl = HidFx2EvtInternalDeviceControl;
status = WdfIoQueueCreate(hDevice, &queueConfig, WDF_NO_OBJECT_ATTRIBUTES, &hQueue);
if (!NT_SUCCESS (status))
{
TraceErr(DBG_PNP, "(%!FUNC!) WdfIoQueueCreate failed 0x%x\n", status);
return status;
}
// Register a manual I/O queue for handling Interrupt Message Read Requests.
WDF_IO_QUEUE_CONFIG_INIT(&queueConfig, WdfIoQueueDispatchManual);
// This queue is used for requests that dont directly access the device.
// The requests in this queue are serviced only when the device is in a fully powered state and sends an interrupt.
queueConfig.PowerManaged = WdfFalse;
status = WdfIoQueueCreate(hDevice, &queueConfig, WDF_NO_OBJECT_ATTRIBUTES, &pDevContext->hInterruptMsgQueue);
if (!NT_SUCCESS(status))
{
TraceErr(DBG_PNP, "(%!FUNC!) WdfIoQueueCreate failed %!STATUS!\n", status);
return status;
}
// Create a timer to handle debouncing of switchpack
WDF_TIMER_CONFIG_INIT(&timerConfig, HidFx2EvtTimerFunction);
timerConfig.AutomaticSerialization = FALSE;
WDF_OBJECT_ATTRIBUTES_INIT(&attributes);
attributes.ParentObject = hDevice;
status = WdfTimerCreate(&timerConfig, &attributes, &hTimer);
if (!NT_SUCCESS(status))
{
TraceErr(DBG_PNP, "(%!FUNC!) WdfTimerCreate failed status:%!STATUS!\n", status);
return status;
}
pDevContext->hDebounceTimer = hTimer;
TraceVerbose(DBG_PNP, "(%!FUNC!) Exit\n");
return status;
}
NTSTATUS
t1394_EvtDeviceAdd(
/*IN*/WDFDRIVER Driver,
/*IN*/PWDFDEVICE_INIT DeviceInit
)
/*++
Routine Description:
EvtDeviceAdd is called by the framework in response to AddDevice
call from the PnP manager.
Arguments:
Driver - Handle to a framework driver object created in DriverEntry
DeviceInit - Pointer to a framework-allocated WDFDEVICE_INIT structure.
Return Value:
NTSTATUS
--*/
{
NTSTATUS status = STATUS_SUCCESS;
PDEVICE_EXTENSION deviceExtension;
PNODE_DEVICE_EXTENSION pNodeExt;
WDF_PNPPOWER_EVENT_CALLBACKS pnpPowerCallbacks;
WDF_OBJECT_ATTRIBUTES fdoAttributes,lockAttributes;
WDFDEVICE device;
WDF_DEVICE_PNP_CAPABILITIES pnpCaps;
WDF_IO_QUEUE_CONFIG ioQueueConfig;
WDF_IO_TARGET_OPEN_PARAMS openParams;
//UNREFERENCED_PARAMETER(Driver);
//ENTER("t1394_PnpAddDevice");
//
// Zero out the PnpPowerCallbacks structure.
//
WDF_PNPPOWER_EVENT_CALLBACKS_INIT(&pnpPowerCallbacks);
//
// Set Callbacks for any of the functions we are interested in.
// If no callback is set, Framework will take the default action
// by itself.
//
// These two callbacks set up and tear down hardware state,
// specifically that which only has to be done once.
//
pnpPowerCallbacks.EvtDevicePrepareHardware = t1394_EvtPrepareHardware;
pnpPowerCallbacks.EvtDeviceReleaseHardware = t1394_EvtReleaseHardware;
pnpPowerCallbacks.EvtDeviceSelfManagedIoCleanup =
t1394_EvtDeviceSelfManagedIoCleanup;
pnpPowerCallbacks.EvtDeviceD0Entry = t1394_EvtDeviceD0Entry;
pnpPowerCallbacks.EvtDeviceD0Exit = t1394_EvtDeviceD0Exit;
//
// Register the PnP and power callbacks. Power policy related callbacks
// will be registered// later in SotwareInit.
//
WdfDeviceInitSetPnpPowerEventCallbacks(DeviceInit, &pnpPowerCallbacks);
if ( !NT_SUCCESS(status)) {
//TRACE(TL_ERROR, ("WdfDeviceInitSetPnpPowerEventCallbacks failed %x\n",
// status));
return status;
}
WdfDeviceInitSetExclusive(DeviceInit, FALSE);
//
// Specify the size and type of device context.
//
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&fdoAttributes, DEVICE_EXTENSION);
status = WdfDeviceCreate(&DeviceInit, &fdoAttributes, &device);
if ( !NT_SUCCESS(status)) {
//TRACE(TL_ERROR, ("WdfDeviceInitialize failed %x\n", status));
return status;
}
deviceExtension = GetDeviceContext (device);
deviceExtension->WdfDevice = device;
//TRACE(TL_TRACE, ("PDO(0x%p) FDO(0x%p), Lower(0x%p) DevExt (0x%p)\n",
// WdfDeviceWdmGetPhysicalDevice (device),
// WdfDeviceWdmGetDeviceObject (device),
// WdfDeviceWdmGetAttachedDevice(device),
// deviceExtension));
//
// Tell the Framework that this device will need an interface so that
// application can interact with it.
//
status = WdfDeviceCreateDeviceInterface(
device,
#if defined(_1394VDEV_DRIVER_)
(LPGUID) &GUID_1394VDEV,
#else
(LPGUID) &GUID_1394DIAG,
#endif
NULL
);
if (!NT_SUCCESS (status)) {
//TRACE(TL_ERROR, ("WdfDeviceCreateDeviceInterface failed %x\n", status));
return status;
}
//
// Tell the framework to set the SurpriseRemovalOK in the DeviceCaps so
// that you don't get the popup in usermode (on Win2K) when you surprise
// remove the device.
//
WDF_DEVICE_PNP_CAPABILITIES_INIT(&pnpCaps);
pnpCaps.SurpriseRemovalOK = WdfTrue;
WdfDeviceSetPnpCapabilities(device, &pnpCaps);
// save the device object we created as our physical device object
deviceExtension->PhysicalDeviceObject =
WdfDeviceWdmGetPhysicalDevice (device);
if (deviceExtension->PhysicalDeviceObject == NULL) {
//TRACE(TL_ERROR, ("WdfDeviceWdmGetPhysicalDevice: NULL DeviceObject\n"));
return STATUS_UNSUCCESSFUL;
}
//
// This is our default IoTarget representing the deviceobject
// we are attached to.
//
deviceExtension->StackIoTarget = WdfDeviceGetIoTarget(device);
deviceExtension->StackDeviceObject = WdfDeviceWdmGetAttachedDevice(device);
if (deviceExtension->StackDeviceObject == NULL) {
//TRACE(TL_ERROR, ("WdfDeviceWdmGetAttachedDevice: NULL DeviceObject\n"));
return STATUS_UNSUCCESSFUL;
}
// Patch: this code is not in DDK 7600.16385.1 {
//
// Get the port device object from the passed in PhysicalDeviceObject
// created by the 1394 stack for us.
// Note: we can't use the top of the stack and get its device extension
// in case there is a filter driver between us and our PDO.
//
//pNodeExt = WdfDeviceWdmGetPhysicalDevice(device)->DeviceExtension;
//deviceExtension->PortDeviceObject = pNodeExt->PortDeviceObject;
// Patch: this code is not in DDK 7600.16385.1 }
//TRACE(TL_TRACE, ("PortDeviceObject = 0x%x\n",
// deviceExtension->PortDeviceObject));
//
// Create a automanaged queue for dispatching ioctl requests.
// All other requests are automatically failed by the framework.
// By creating an automanaged queue we don't have to worry about
// PNP/Power synchronization.
// A default queue gets all the requests that are not
// configure-fowarded using WdfDeviceConfigureRequestDispatching.
//
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE(
&ioQueueConfig,
WdfIoQueueDispatchParallel
);
ioQueueConfig.EvtIoDeviceControl = t1394_EvtIoDeviceControl;
status = WdfIoQueueCreate(
deviceExtension->WdfDevice,
&ioQueueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&deviceExtension->IoctlQueue // queue handle
);
if (!NT_SUCCESS (status)) {
//TRACE(TL_ERROR, ("WdfIoQueueCreate failed 0x%x\n", status));
return status;
}
//
// Create an additional queue to hold bus reset requests.
//
WDF_IO_QUEUE_CONFIG_INIT(
&ioQueueConfig,
WdfIoQueueDispatchManual
);
status = WdfIoQueueCreate (
deviceExtension->WdfDevice,
&ioQueueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&deviceExtension->BusResetRequestsQueue
);
if(!NT_SUCCESS (status)){
//TRACE(TL_ERROR, ("Error Creating Reset Request Queue 0x%x\n",
// status));
return status;
}
//
// Create another IoTarget representing PortDeviceObject so that
// we can send async requests in rawmode directly to the port device.
//
WDF_IO_TARGET_OPEN_PARAMS_INIT_EXISTING_DEVICE(&openParams,
pNodeExt->PortDeviceObject);
status = WdfIoTargetCreate(device,
WDF_NO_OBJECT_ATTRIBUTES,
&deviceExtension->PortDeviceIoTarget);
if (!NT_SUCCESS (status)) {
//TRACE(TL_ERROR, ("WdfIoTargetCreate failed 0x%x\n", status));
return status;
}
status = WdfIoTargetOpen(deviceExtension->PortDeviceIoTarget, &openParams);
if (!NT_SUCCESS (status)) {
//TRACE(TL_ERROR, ("WdfIoTargetCreate failed 0x%x\n", status));
return status;
}
WDF_OBJECT_ATTRIBUTES_INIT(&lockAttributes);
lockAttributes.ParentObject = device;
// initialize the spinlock/list to store the bus reset irps...
status = WdfSpinLockCreate(&lockAttributes,&deviceExtension->CromSpinLock );
if(!NT_SUCCESS(status)){
//TRACE(TL_ERROR, ("WdfSpinLockCreate CromSpinLock "
// "failed 0x%x\n", status));
return status;
}
WDF_OBJECT_ATTRIBUTES_INIT(&lockAttributes);
lockAttributes.ParentObject = device;
status = WdfSpinLockCreate(&lockAttributes,
&deviceExtension->AsyncSpinLock );
if(!NT_SUCCESS(status)){
//TRACE(TL_ERROR, ("WdfSpinLockCreate AsyncSpinLock "
// "failed 0x%x\n", status));
return status;
}
WDF_OBJECT_ATTRIBUTES_INIT(&lockAttributes);
lockAttributes.ParentObject = device;
status = WdfSpinLockCreate(&lockAttributes,
&deviceExtension->IsochSpinLock );
if(!NT_SUCCESS(status)){
//TRACE(TL_ERROR, ("WdfSpinLockCreate IsochSpinLock "
// "failed 0x%x\n", status));
return status;
}
WDF_OBJECT_ATTRIBUTES_INIT(&lockAttributes);
lockAttributes.ParentObject = device;
status = WdfSpinLockCreate(&lockAttributes,
&deviceExtension->IsochResourceSpinLock );
if(!NT_SUCCESS(status)){
//TRACE(TL_ERROR, ("WdfSpinLockCreate IsochResourceSpinLock "
// "failed 0x%x\n", status));
return status;
}
InitializeListHead(&deviceExtension->CromData);
InitializeListHead(&deviceExtension->AsyncAddressData);
InitializeListHead(&deviceExtension->IsochDetachData);
InitializeListHead(&deviceExtension->IsochResourceData);
//EXIT("t1394_PnpAddDevice", status);
return(status);
} // t1394_PnpAddDevice
NTSTATUS
VIOSerialDeviceListCreatePdo(
IN WDFCHILDLIST DeviceList,
IN PWDF_CHILD_IDENTIFICATION_DESCRIPTION_HEADER IdentificationDescription,
IN PWDFDEVICE_INIT ChildInit
)
{
PVIOSERIAL_PORT pport = NULL;
NTSTATUS status = STATUS_SUCCESS;
WDFDEVICE hChild = NULL;
WDF_OBJECT_ATTRIBUTES attributes;
WDF_PNPPOWER_EVENT_CALLBACKS PnpPowerCallbacks;
WDF_DEVICE_PNP_CAPABILITIES pnpCaps;
WDF_DEVICE_STATE deviceState;
WDF_IO_QUEUE_CONFIG queueConfig;
PRAWPDO_VIOSERIAL_PORT rawPdo = NULL;
WDF_FILEOBJECT_CONFIG fileConfig;
DECLARE_CONST_UNICODE_STRING(deviceId, PORT_DEVICE_ID );
DECLARE_CONST_UNICODE_STRING(deviceLocation, L"RedHat VIOSerial Port" );
DECLARE_UNICODE_STRING_SIZE(buffer, DEVICE_DESC_LENGTH);
UNREFERENCED_PARAMETER(DeviceList);
PAGED_CODE();
TraceEvents(TRACE_LEVEL_INFORMATION, DBG_PNP, "--> %s\n", __FUNCTION__);
pport = CONTAINING_RECORD(IdentificationDescription,
VIOSERIAL_PORT,
Header
);
WdfDeviceInitSetDeviceType(ChildInit, FILE_DEVICE_SERIAL_PORT);
WdfDeviceInitSetIoType(ChildInit, WdfDeviceIoDirect);
do
{
WdfDeviceInitSetExclusive(ChildInit, TRUE);
status = WdfPdoInitAssignRawDevice(ChildInit, &GUID_DEVCLASS_PORT_DEVICE);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP, "WdfPdoInitAssignRawDevice failed - 0x%x\n", status);
break;
}
status = WdfDeviceInitAssignSDDLString(ChildInit, &SDDL_DEVOBJ_SYS_ALL_ADM_ALL);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP, "WdfDeviceInitAssignSDDLString failed - 0x%x\n", status);
break;
}
status = WdfPdoInitAssignDeviceID(ChildInit, &deviceId);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP, "WdfPdoInitAssignDeviceID failed - 0x%x\n", status);
break;
}
status = WdfPdoInitAddHardwareID(ChildInit, &deviceId);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP, "WdfPdoInitAddHardwareID failed - 0x%x\n", status);
break;
}
status = RtlUnicodeStringPrintf(
&buffer,
L"%02u",
pport->PortId
);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP, "RtlUnicodeStringPrintf failed - 0x%x\n", status);
break;
}
status = WdfPdoInitAssignInstanceID(ChildInit, &buffer);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP, "WdfPdoInitAssignInstanceID failed - 0x%x\n", status);
break;
}
status = RtlUnicodeStringPrintf(
&buffer,
L"vport%up%u",
pport->DeviceId,
pport->PortId
);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"RtlUnicodeStringPrintf failed 0x%x\n", status);
break;
}
status = WdfPdoInitAddDeviceText(
ChildInit,
&buffer,
&deviceLocation,
0x409
);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfPdoInitAddDeviceText failed 0x%x\n", status);
break;
}
WdfPdoInitSetDefaultLocale(ChildInit, 0x409);
WDF_FILEOBJECT_CONFIG_INIT(
&fileConfig,
VIOSerialPortCreate,
VIOSerialPortClose,
WDF_NO_EVENT_CALLBACK
);
WdfDeviceInitSetFileObjectConfig(
ChildInit,
&fileConfig,
WDF_NO_OBJECT_ATTRIBUTES
);
WDF_PNPPOWER_EVENT_CALLBACKS_INIT(&PnpPowerCallbacks);
PnpPowerCallbacks.EvtDeviceD0Entry = VIOSerialPortEvtDeviceD0Entry;
PnpPowerCallbacks.EvtDeviceD0ExitPreInterruptsDisabled = VIOSerialPortEvtDeviceD0ExitPreInterruptsDisabled;
PnpPowerCallbacks.EvtDeviceD0Exit = VIOSerialPortEvtDeviceD0Exit;
WdfDeviceInitSetPnpPowerEventCallbacks(ChildInit, &PnpPowerCallbacks);
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&attributes, RAWPDO_VIOSERIAL_PORT);
attributes.SynchronizationScope = WdfSynchronizationScopeDevice;
attributes.ExecutionLevel = WdfExecutionLevelPassive;
status = WdfDeviceCreate(
&ChildInit,
&attributes,
&hChild
);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfDeviceCreate failed 0x%x\n", status);
break;
}
rawPdo = RawPdoSerialPortGetData(hChild);
rawPdo->port = pport;
pport->Device = hChild;
WDF_IO_QUEUE_CONFIG_INIT(&queueConfig,
WdfIoQueueDispatchSequential
);
queueConfig.EvtIoDeviceControl = VIOSerialPortDeviceControl;
status = WdfIoQueueCreate(hChild,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&pport->IoctlQueue
);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfIoQueueCreate failed (IoCtrl Queue): 0x%x\n", status);
break;
}
status = WdfDeviceConfigureRequestDispatching(
hChild,
pport->IoctlQueue,
WdfRequestTypeDeviceControl
);
if(!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"DeviceConfigureRequestDispatching failed (IoCtrl Queue): 0x%x\n", status);
break;
}
WDF_IO_QUEUE_CONFIG_INIT(&queueConfig,
WdfIoQueueDispatchSequential);
queueConfig.EvtIoRead = VIOSerialPortRead;
queueConfig.EvtIoStop = VIOSerialPortIoStop;
status = WdfIoQueueCreate(hChild,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&pport->ReadQueue
);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfIoQueueCreate (Read Queue) failed 0x%x\n", status);
break;
}
status = WdfDeviceConfigureRequestDispatching(
hChild,
pport->ReadQueue,
WdfRequestTypeRead
);
if(!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"DeviceConfigureRequestDispatching failed (Read Queue): 0x%x\n", status);
break;
}
WDF_IO_QUEUE_CONFIG_INIT(&queueConfig, WdfIoQueueDispatchSequential);
queueConfig.AllowZeroLengthRequests = WdfFalse;
queueConfig.EvtIoWrite = VIOSerialPortWrite;
status = WdfIoQueueCreate(hChild, &queueConfig,
WDF_NO_OBJECT_ATTRIBUTES, &pport->WriteQueue);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfIoQueueCreate failed (Write Queue): 0x%x\n", status);
break;
}
status = WdfDeviceConfigureRequestDispatching(
hChild,
pport->WriteQueue,
WdfRequestTypeWrite
);
if(!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"DeviceConfigureRequestDispatching failed (Write Queue): 0x%x\n", status);
break;
}
WDF_DEVICE_PNP_CAPABILITIES_INIT(&pnpCaps);
pnpCaps.NoDisplayInUI = WdfTrue;
pnpCaps.Removable = WdfTrue;
pnpCaps.EjectSupported = WdfTrue;
pnpCaps.SurpriseRemovalOK= WdfTrue;
pnpCaps.Address = pport->DeviceId;
pnpCaps.UINumber = pport->PortId;
WdfDeviceSetPnpCapabilities(hChild, &pnpCaps);
WDF_DEVICE_STATE_INIT(&deviceState);
deviceState.DontDisplayInUI = WdfTrue;
WdfDeviceSetDeviceState(hChild, &deviceState);
status = WdfDeviceCreateDeviceInterface(
hChild,
&GUID_VIOSERIAL_PORT,
NULL
);
if (!NT_SUCCESS (status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfDeviceCreateDeviceInterface failed 0x%x\n", status);
break;
}
WDF_OBJECT_ATTRIBUTES_INIT(&attributes);
attributes.ParentObject = hChild;
status = WdfSpinLockCreate(
&attributes,
&pport->InBufLock
);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfSpinLockCreate failed 0x%x\n", status);
break;
}
WDF_OBJECT_ATTRIBUTES_INIT(&attributes);
attributes.ParentObject = hChild;
status = WdfSpinLockCreate(
&attributes,
&pport->OutVqLock
);
if (!NT_SUCCESS(status))
{
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfSpinLockCreate failed 0x%x\n", status);
break;
}
} while (0);
if (!NT_SUCCESS(status))
{
// We can send this before PDO is PRESENT since the device won't send any response.
VIOSerialSendCtrlMsg(pport->BusDevice, pport->PortId, VIRTIO_CONSOLE_PORT_READY, 0);
}
TraceEvents(TRACE_LEVEL_INFORMATION, DBG_PNP, "<-- %s status 0x%x\n", __FUNCTION__, status);
return status;
}
NTSTATUS
OsrFxEvtDeviceAdd(
WDFDRIVER Driver,
PWDFDEVICE_INIT DeviceInit
)
/*++
Routine Description:
EvtDeviceAdd is called by the framework in response to AddDevice
call from the PnP manager. We create and initialize a device object to
represent a new instance of the device. All the software resources
should be allocated in this callback.
Arguments:
Driver - Handle to a framework driver object created in DriverEntry
DeviceInit - Pointer to a framework-allocated WDFDEVICE_INIT structure.
Return Value:
NTSTATUS
--*/
{
WDF_PNPPOWER_EVENT_CALLBACKS pnpPowerCallbacks;
WDF_OBJECT_ATTRIBUTES attributes;
NTSTATUS status;
WDFDEVICE device;
WDF_DEVICE_PNP_CAPABILITIES pnpCaps;
WDF_IO_QUEUE_CONFIG ioQueueConfig;
PDEVICE_CONTEXT pDevContext;
WDFQUEUE queue;
GUID activity;
UNREFERENCED_PARAMETER(Driver);
PAGED_CODE();
TraceEvents(TRACE_LEVEL_INFORMATION, DBG_PNP,"--> OsrFxEvtDeviceAdd routine\n");
//
// Initialize the pnpPowerCallbacks structure. Callback events for PNP
// and Power are specified here. If you don't supply any callbacks,
// the Framework will take appropriate default actions based on whether
// DeviceInit is initialized to be an FDO, a PDO or a filter device
// object.
//
WDF_PNPPOWER_EVENT_CALLBACKS_INIT(&pnpPowerCallbacks);
//
// For usb devices, PrepareHardware callback is the to place select the
// interface and configure the device.
//
pnpPowerCallbacks.EvtDevicePrepareHardware = OsrFxEvtDevicePrepareHardware;
//
// These two callbacks start and stop the wdfusb pipe continuous reader
// as we go in and out of the D0-working state.
//
pnpPowerCallbacks.EvtDeviceD0Entry = OsrFxEvtDeviceD0Entry;
pnpPowerCallbacks.EvtDeviceD0Exit = OsrFxEvtDeviceD0Exit;
pnpPowerCallbacks.EvtDeviceSelfManagedIoFlush = OsrFxEvtDeviceSelfManagedIoFlush;
WdfDeviceInitSetPnpPowerEventCallbacks(DeviceInit, &pnpPowerCallbacks);
WdfDeviceInitSetIoType(DeviceInit, WdfDeviceIoBuffered);
//
// Now specify the size of device extension where we track per device
// context.DeviceInit is completely initialized. So call the framework
// to create the device and attach it to the lower stack.
//
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&attributes, DEVICE_CONTEXT);
status = WdfDeviceCreate(&DeviceInit, &attributes, &device);
if (!NT_SUCCESS(status)) {
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfDeviceCreate failed with Status code %!STATUS!\n", status);
return status;
}
//
// Setup the activity ID so that we can log events using it.
//
activity = DeviceToActivityId(device);
//
// Get the DeviceObject context by using accessor function specified in
// the WDF_DECLARE_CONTEXT_TYPE_WITH_NAME macro for DEVICE_CONTEXT.
//
pDevContext = GetDeviceContext(device);
//
// Get the device's friendly name and location so that we can use it in
// error logging. If this fails then it will setup dummy strings.
//
GetDeviceEventLoggingNames(device);
//
// Tell the framework to set the SurpriseRemovalOK in the DeviceCaps so
// that you don't get the popup in usermodewhen you surprise remove the device.
//
WDF_DEVICE_PNP_CAPABILITIES_INIT(&pnpCaps);
pnpCaps.SurpriseRemovalOK = WdfTrue;
WdfDeviceSetPnpCapabilities(device, &pnpCaps);
//
// Create a parallel default queue and register an event callback to
// receive ioctl requests. We will create separate queues for
// handling read and write requests. All other requests will be
// completed with error status automatically by the framework.
//
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE(&ioQueueConfig,
WdfIoQueueDispatchParallel);
ioQueueConfig.EvtIoDeviceControl = OsrFxEvtIoDeviceControl;
//
// By default, Static Driver Verifier (SDV) displays a warning if it
// doesn't find the EvtIoStop callback on a power-managed queue.
// The 'assume' below causes SDV to suppress this warning. If the driver
// has not explicitly set PowerManaged to WdfFalse, the framework creates
// power-managed queues when the device is not a filter driver. Normally
// the EvtIoStop is required for power-managed queues, but for this driver
// it is not needed b/c the driver doesn't hold on to the requests for
// long time or forward them to other drivers.
// If the EvtIoStop callback is not implemented, the framework waits for
// all driver-owned requests to be done before moving in the Dx/sleep
// states or before removing the device, which is the correct behavior
// for this type of driver. If the requests were taking an indeterminate
// amount of time to complete, or if the driver forwarded the requests
// to a lower driver/another stack, the queue should have an
// EvtIoStop/EvtIoResume.
//
__analysis_assume(ioQueueConfig.EvtIoStop != 0);
status = WdfIoQueueCreate(device,
&ioQueueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&queue);// pointer to default queue
__analysis_assume(ioQueueConfig.EvtIoStop == 0);
if (!NT_SUCCESS(status)) {
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfIoQueueCreate failed %!STATUS!\n", status);
goto Error;
}
//
// We will create a separate sequential queue and configure it
// to receive read requests. We also need to register a EvtIoStop
// handler so that we can acknowledge requests that are pending
// at the target driver.
//
WDF_IO_QUEUE_CONFIG_INIT(&ioQueueConfig, WdfIoQueueDispatchSequential);
ioQueueConfig.EvtIoRead = OsrFxEvtIoRead;
ioQueueConfig.EvtIoStop = OsrFxEvtIoStop;
status = WdfIoQueueCreate(
device,
&ioQueueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&queue // queue handle
);
if (!NT_SUCCESS (status)) {
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfIoQueueCreate failed 0x%x\n", status);
goto Error;
}
status = WdfDeviceConfigureRequestDispatching(
device,
queue,
WdfRequestTypeRead);
if(!NT_SUCCESS (status)){
assert(NT_SUCCESS(status));
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfDeviceConfigureRequestDispatching failed 0x%x\n", status);
goto Error;
}
//
// We will create another sequential queue and configure it
// to receive write requests.
//
WDF_IO_QUEUE_CONFIG_INIT(&ioQueueConfig, WdfIoQueueDispatchSequential);
ioQueueConfig.EvtIoWrite = OsrFxEvtIoWrite;
ioQueueConfig.EvtIoStop = OsrFxEvtIoStop;
status = WdfIoQueueCreate(
device,
&ioQueueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&queue // queue handle
);
if (!NT_SUCCESS (status)) {
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfIoQueueCreate failed 0x%x\n", status);
goto Error;
}
status = WdfDeviceConfigureRequestDispatching(
device,
queue,
WdfRequestTypeWrite);
if(!NT_SUCCESS (status)){
assert(NT_SUCCESS(status));
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfDeviceConfigureRequestDispatching failed 0x%x\n", status);
goto Error;
}
//
// Register a manual I/O queue for handling Interrupt Message Read Requests.
// This queue will be used for storing Requests that need to wait for an
// interrupt to occur before they can be completed.
//
WDF_IO_QUEUE_CONFIG_INIT(&ioQueueConfig, WdfIoQueueDispatchManual);
//
// This queue is used for requests that dont directly access the device. The
// requests in this queue are serviced only when the device is in a fully
// powered state and sends an interrupt. So we can use a non-power managed
// queue to park the requests since we dont care whether the device is idle
// or fully powered up.
//
ioQueueConfig.PowerManaged = WdfFalse;
status = WdfIoQueueCreate(device,
&ioQueueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&pDevContext->InterruptMsgQueue
);
if (!NT_SUCCESS(status)) {
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfIoQueueCreate failed 0x%x\n", status);
goto Error;
}
//
// Register a device interface so that app can find our device and talk to it.
//
status = WdfDeviceCreateDeviceInterface(device,
(LPGUID) &GUID_DEVINTERFACE_OSRUSBFX2,
NULL); // Reference String
if (!NT_SUCCESS(status)) {
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfDeviceCreateDeviceInterface failed %!STATUS!\n", status);
goto Error;
}
//
// Create the lock that we use to serialize calls to ResetDevice(). As an
// alternative to using a WDFWAITLOCK to serialize the calls, a sequential
// WDFQUEUE can be created and reset IOCTLs would be forwarded to it.
//
WDF_OBJECT_ATTRIBUTES_INIT(&attributes);
attributes.ParentObject = device;
status = WdfWaitLockCreate(&attributes, &pDevContext->ResetDeviceWaitLock);
if (!NT_SUCCESS(status)) {
TraceEvents(TRACE_LEVEL_ERROR, DBG_PNP,
"WdfWaitLockCreate failed %!STATUS!\n", status);
goto Error;
}
TraceEvents(TRACE_LEVEL_INFORMATION, DBG_PNP, "<-- OsrFxEvtDeviceAdd\n");
return status;
Error:
//
// Log fail to add device to the event log
//
EventWriteFailAddDevice(pDevContext->DeviceName,
pDevContext->Location,
status);
return status;
}
///////////////////////////////////////////////////////////////////////////////
//
// BasicUsbEvtDeviceAdd
//
// This routine is called by the framework when a device of
// the type we support is found in the system.
//
// INPUTS:
//
// DriverObject - Our WDFDRIVER object
//
// DeviceInit - The device iniitalization structure we'll
// be using to create our WDFDEVICE
//
// OUTPUTS:
//
// None.
//
// RETURNS:
//
// STATUS_SUCCESS, otherwise an error indicating why the driver could not
// load.
//
// IRQL:
//
// This routine is called at IRQL == PASSIVE_LEVEL.
//
// NOTES:
//
//
///////////////////////////////////////////////////////////////////////////////
NTSTATUS
BasicUsbEvtDeviceAdd(WDFDRIVER Driver, PWDFDEVICE_INIT DeviceInit)
{
NTSTATUS status;
WDF_OBJECT_ATTRIBUTES objAttributes;
WDFDEVICE device;
WDF_IO_QUEUE_CONFIG queueConfig;
WDF_PNPPOWER_EVENT_CALLBACKS pnpPowerCallbacks;
PBASICUSB_DEVICE_CONTEXT devContext;
#if DBG
DbgPrint("BasicUsbEvtDeviceAdd\n");
#endif
//
// Our "internal" (native) and user-accessible device names
//
DECLARE_CONST_UNICODE_STRING(nativeDeviceName, L"\\Device\\BasicUsb");
DECLARE_CONST_UNICODE_STRING(userDeviceName, L"\\Global??\\BasicUsb");
UNREFERENCED_PARAMETER(Driver);
//
// Life is a bit more complicated in this driver...
//
// We need an EvtPrepareHardware to configure our device. In addition, we
// must handle EvtD0Entry and EvtD0Exit in order to manage our continuous
// reader.
//
//
// Prepare for WDFDEVICE creation
//
// Initialize standard WDF Object Attributes structure
//
WDF_OBJECT_ATTRIBUTES_INIT(&objAttributes);
//
// Specify our device context
//
WDF_OBJECT_ATTRIBUTES_SET_CONTEXT_TYPE(&objAttributes,
BASICUSB_DEVICE_CONTEXT);
//
// We want our device object NAMED, thank you very much
//
status = WdfDeviceInitAssignName(DeviceInit, &nativeDeviceName);
if (!NT_SUCCESS(status)) {
#if DBG
DbgPrint("WdfDeviceInitAssignName failed 0x%0x\n", status);
#endif
return(status);
}
//
// Set our I/O type to DIRECT, meaning that we want to receive
// MDLs for both read and write requests.
//
// While we are not obligated to choose direct, USB drivers
// typically do so because the USB bus driver needs MDLs to
// actually perform the transfer. If we select DIRECT I/O, the
// bus driver can just use the MDL that we're given as opposed
// to creating his own.
//
WdfDeviceInitSetIoType(DeviceInit, WdfDeviceIoDirect);
//
// In this driver we need to be notified of some Pnp/Power
// events, so initialize a pnp power callbacks structure.
//
WDF_PNPPOWER_EVENT_CALLBACKS_INIT(&pnpPowerCallbacks);
//
// USB drivers configure their device within prepare hardware,
// so register an EvtDevicePrepareHardware callback.
//
pnpPowerCallbacks.EvtDevicePrepareHardware
= BasicUsbEvtDevicePrepareHardware;
//
// Our driver uses a continuous reader on the interrupt pipe to
// be notified asynchronously of changes to the OSRFX2's
// switchpack. We need to start the reader in D0Entry and stop
// it in D0Exit, so register for EvtDeviceD0Entry and
// EvtDeviceD0Exit callbacks
//
pnpPowerCallbacks.EvtDeviceD0Entry = BasicUsbEvtDeviceD0Entry;
pnpPowerCallbacks.EvtDeviceD0Exit = BasicUsbEvtDeviceD0Exit;
//
// Update the DeviceInit structure to contain the new callbacks.
//
WdfDeviceInitSetPnpPowerEventCallbacks(DeviceInit,
&pnpPowerCallbacks);
//
// We want to send control transfers synchronously from within
// EvtIoDeviceControl, so we'll apply a PASSIVE_LEVEL constraint
// to our device
//
objAttributes.ExecutionLevel = WdfExecutionLevelPassive;
//
// Now let's create our device object
//
status = WdfDeviceCreate(&DeviceInit,
&objAttributes,
&device);
if (!NT_SUCCESS(status)) {
#if DBG
DbgPrint("WdfDeviceCreate failed 0x%0x\n", status);
#endif
return status;
}
//
// Create a symbolic link for the control object so that usermode can open
// the device by name.
//
status = WdfDeviceCreateSymbolicLink(device, &userDeviceName);
if (!NT_SUCCESS(status)) {
#if DBG
DbgPrint("WdfDeviceCreateSymbolicLink failed 0x%0x\n", status);
#endif
return(status);
}
//
// ALSO create a device interface for the device
// This allows usage of the lovely SetupApiXxxx functions to locate
// the device
//
status = WdfDeviceCreateDeviceInterface(device,
&GUID_DEVINTERFACE_BASICUSB,
NULL);
if (!NT_SUCCESS(status)) {
#if DBG
DbgPrint("WdfDeviceCreateDeviceInterface failed 0x%0x\n", status);
#endif
return(status);
}
//
// Configure our queue of incoming requests
//
// We only use the default queue, and we set it for parallel processing.
// We chose this because we may have, say, a bulk read hanging on the bus
// driver that won't get completed until we send down a bulk write.
//
// If we chose a sequential queue we wouldn't be presented the write from
// the user until the read completed, but the read wouldn't complete
// until we were presented the write from the user - resulting in an "I/O
// deadlock".
//
//
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE(&queueConfig,
WdfIoQueueDispatchParallel);
//
// Declare our I/O Event Processing callbacks
//
// We handle, read, write, and device control requests.
//
// WDF will automagically handle Create and Close requests for us and will
// will complete any OTHER request types with STATUS_INVALID_DEVICE_REQUEST.
//
queueConfig.EvtIoRead = BasicUsbEvtRead;
queueConfig.EvtIoWrite = BasicUsbEvtWrite;
queueConfig.EvtIoDeviceControl = BasicUsbEvtDeviceControl;
//
// Because this is a queue for a real hardware
// device, indicate that the queue needs to be
// power managed
//
queueConfig.PowerManaged = WdfTrue;
status = WdfIoQueueCreate(device,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
NULL); // optional pointer to receive queue handle
if (!NT_SUCCESS(status)) {
#if DBG
DbgPrint("WdfIoQueueCreate for default queue failed 0x%0x\n", status);
#endif
return(status);
}
devContext = BasicUsbGetContextFromDevice(device);
WDF_IO_QUEUE_CONFIG_INIT(&queueConfig,
WdfIoQueueDispatchManual);
status = WdfIoQueueCreate(device,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&devContext->SwitchPackStateChangeQueue);
if (!NT_SUCCESS(status)) {
#if DBG
DbgPrint("WdfIoQueueCreate for manual queue failed 0x%0x\n", status);
#endif
return(status);
}
return(STATUS_SUCCESS);
}
void CWdfSpecificQueue::InitConfig(WDF_IO_QUEUE_CONFIG &QueueConfig)
{
WDF_IO_QUEUE_CONFIG_INIT(&QueueConfig, m_DispatchType);
}
NTSTATUS
OnDeviceAdd(
_In_ WDFDRIVER FxDriver,
_Inout_ PWDFDEVICE_INIT FxDeviceInit
)
/*++
Routine Description:
This routine creates the device object for an SPB
controller and the device's child objects.
Arguments:
FxDriver - the WDF driver object handle
FxDeviceInit - information about the PDO that we are loading on
Return Value:
Status
--*/
{
FuncEntry(TRACE_FLAG_WDFLOADING);
PDEVICE_CONTEXT pDevice;
WDFDEVICE fxDevice;
WDF_INTERRUPT_CONFIG interruptConfig;
NTSTATUS status;
UNREFERENCED_PARAMETER(FxDriver);
//
// Tell framework this is a filter driver. Filter drivers by default are
// not power policy owners. This works well for this driver because
// HIDclass driver is the power policy owner for HID minidrivers.
//
WdfFdoInitSetFilter(FxDeviceInit);
//
// Setup PNP/Power callbacks.
//
{
WDF_PNPPOWER_EVENT_CALLBACKS pnpCallbacks;
WDF_PNPPOWER_EVENT_CALLBACKS_INIT(&pnpCallbacks);
pnpCallbacks.EvtDevicePrepareHardware = OnPrepareHardware;
pnpCallbacks.EvtDeviceReleaseHardware = OnReleaseHardware;
pnpCallbacks.EvtDeviceD0Entry = OnD0Entry;
pnpCallbacks.EvtDeviceD0Exit = OnD0Exit;
WdfDeviceInitSetPnpPowerEventCallbacks(FxDeviceInit, &pnpCallbacks);
}
//
// Set request attributes.
//
{
WDF_OBJECT_ATTRIBUTES attributes;
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(
&attributes,
REQUEST_CONTEXT);
WdfDeviceInitSetRequestAttributes(FxDeviceInit, &attributes);
}
//
// Create the device.
//
{
WDF_OBJECT_ATTRIBUTES deviceAttributes;
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&deviceAttributes, DEVICE_CONTEXT);
status = WdfDeviceCreate(
&FxDeviceInit,
&deviceAttributes,
&fxDevice);
if (!NT_SUCCESS(status))
{
CyapaPrint(
TRACE_LEVEL_ERROR,
TRACE_FLAG_WDFLOADING,
"Error creating WDFDEVICE - %!STATUS!",
status);
goto exit;
}
pDevice = GetDeviceContext(fxDevice);
NT_ASSERT(pDevice != nullptr);
pDevice->FxDevice = fxDevice;
}
//
// Ensure device is disable-able
//
{
WDF_DEVICE_STATE deviceState;
WDF_DEVICE_STATE_INIT(&deviceState);
deviceState.NotDisableable = WdfFalse;
WdfDeviceSetDeviceState(pDevice->FxDevice, &deviceState);
}
//
// Create queues to handle IO
//
{
WDF_IO_QUEUE_CONFIG queueConfig;
WDFQUEUE queue;
//
// Top-level queue
//
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE(
&queueConfig,
WdfIoQueueDispatchParallel);
queueConfig.EvtIoDefault = OnTopLevelIoDefault;
queueConfig.PowerManaged = WdfFalse;
status = WdfIoQueueCreate(
pDevice->FxDevice,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&queue
);
if (!NT_SUCCESS(status))
{
CyapaPrint(
TRACE_LEVEL_ERROR,
TRACE_FLAG_WDFLOADING,
"Error creating top-level IO queue - %!STATUS!",
status);
goto exit;
}
//
// Sequential SPB queue
//
WDF_IO_QUEUE_CONFIG_INIT(
&queueConfig,
WdfIoQueueDispatchSequential);
queueConfig.EvtIoInternalDeviceControl = OnIoDeviceControl;
queueConfig.PowerManaged = WdfFalse;
status = WdfIoQueueCreate(
fxDevice,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&pDevice->SpbQueue
);
if (!NT_SUCCESS(status))
{
CyapaPrint(DEBUG_LEVEL_ERROR, DBG_PNP,
"WdfIoQueueCreate failed 0x%x\n", status);
goto exit;
}
}
WDF_IO_QUEUE_CONFIG queueConfig;
WDF_IO_QUEUE_CONFIG_INIT(&queueConfig, WdfIoQueueDispatchManual);
queueConfig.PowerManaged = WdfFalse;
status = WdfIoQueueCreate(pDevice->FxDevice,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&pDevice->ReportQueue
);
if (!NT_SUCCESS(status))
{
CyapaPrint(DEBUG_LEVEL_ERROR, DBG_PNP, "Queue 2!\n");
CyapaPrint(DEBUG_LEVEL_ERROR, DBG_PNP,
"WdfIoQueueCreate failed 0x%x\n", status);
return status;
}
//
// Create an interrupt object for hardware notifications
//
WDF_INTERRUPT_CONFIG_INIT(
&interruptConfig,
OnInterruptIsr,
NULL);
interruptConfig.PassiveHandling = TRUE;
status = WdfInterruptCreate(
fxDevice,
&interruptConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&pDevice->Interrupt);
if (!NT_SUCCESS(status))
{
CyapaPrint(DEBUG_LEVEL_ERROR, DBG_PNP,
"Error creating WDF interrupt object - %!STATUS!",
status);
goto exit;
}
WDF_TIMER_CONFIG timerConfig;
WDFTIMER hTimer;
WDF_OBJECT_ATTRIBUTES attributes;
WDF_TIMER_CONFIG_INIT_PERIODIC(&timerConfig, CyapaTimerFunc, 10);
WDF_OBJECT_ATTRIBUTES_INIT(&attributes);
attributes.ParentObject = fxDevice;
status = WdfTimerCreate(&timerConfig, &attributes, &hTimer);
pDevice->Timer = hTimer;
if (!NT_SUCCESS(status))
{
CyapaPrint(DEBUG_LEVEL_ERROR, DBG_PNP, "(%!FUNC!) WdfTimerCreate failed status:%!STATUS!\n", status);
return status;
}
CyapaPrint(DEBUG_LEVEL_ERROR, DBG_PNP,
"Success! 0x%x\n", status);
pDevice->DeviceMode = DEVICE_MODE_MOUSE;
exit:
FuncExit(TRACE_FLAG_WDFLOADING);
return status;
}
NTSTATUS CreateQueues(WDFDEVICE Device, PDEVICE_CONTEXT Context)
{
NTSTATUS status = STATUS_SUCCESS;
WDF_IO_QUEUE_CONFIG ioQConfig;
/*Create the default IO queue. this one will be used for ioctl request entry.
this queue is parallel, so as to prevent unnecessary serialization for
IO requests that can be handled in parallel.*/
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE(&ioQConfig,
WdfIoQueueDispatchParallel);
ioQConfig.EvtIoDeviceControl = EvtDeviceIoControlEntry;
status = WdfIoQueueCreate(Device,
&ioQConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&Context->IoControlEntryQueue);
if(!NT_SUCCESS(status))
{
KdPrint((__DRIVER_NAME
"WdfIoQueueCreate failed with status 0x%08x\n", status));
return status;
}
/*Create the IO queue for serialize IO requests. This queue will be filled by
the IO control entry handler with the requests that have to be serialized
for execution.*/
WDF_IO_QUEUE_CONFIG_INIT(&ioQConfig,
WdfIoQueueDispatchSequential);
ioQConfig.EvtIoDeviceControl = EvtDeviceIoControlSerial;
status = WdfIoQueueCreate(Device,
&ioQConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&Context->IoControlSerialQueue);
if(!NT_SUCCESS(status))
{
KdPrint((__DRIVER_NAME
"WdfIoQueueCreate failed with status 0x%08x\n", status));
return status;
}
/*Create the IO queue for write requests*/
WDF_IO_QUEUE_CONFIG_INIT(&ioQConfig,
WdfIoQueueDispatchSequential);
ioQConfig.EvtIoWrite = EvtDeviceIoWrite;
status = WdfIoQueueCreate(Device,
&ioQConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&Context->IoWriteQueue);
if(!NT_SUCCESS(status))
{
KdPrint((__DRIVER_NAME
"WdfIoQueueCreate failed with status 0x%08x\n", status));
return status;
}
status = WdfDeviceConfigureRequestDispatching(Device,
Context->IoWriteQueue,
WdfRequestTypeWrite);
if(!NT_SUCCESS(status))
{
KdPrint((__DRIVER_NAME
"WdfDeviceConfigureRequestDispatching failed with status 0x%08x\n",
status));
return status;
}
/*Create the IO queue for read requests*/
WDF_IO_QUEUE_CONFIG_INIT(&ioQConfig,
WdfIoQueueDispatchSequential);
ioQConfig.EvtIoRead = EvtDeviceIoRead;
status = WdfIoQueueCreate(Device,
&ioQConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&Context->IoReadQueue);
if(!NT_SUCCESS(status))
{
KdPrint((__DRIVER_NAME
"WdfIoQueueCreate failed with status 0x%08x\n", status));
return status;
}
status = WdfDeviceConfigureRequestDispatching(Device,
Context->IoReadQueue,
WdfRequestTypeRead);
if(!NT_SUCCESS(status))
{
KdPrint((__DRIVER_NAME
"WdfDeviceConfigureRequestDispatching failed with status 0x%08x\n",
status));
return status;
}
/*Create a manual queue for storing the IOCTL_WDF_USB_GET_SWITCHSTATE_CHANGE
IO control requests. If a file handle associated with one or more requests
in the queue is closed, the requests themselves are automatically removed
from the queue by the framework and cancelled.*/
WDF_IO_QUEUE_CONFIG_INIT(&ioQConfig,
WdfIoQueueDispatchManual);
status = WdfIoQueueCreate(Device,
&ioQConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&Context->SwitchChangeRequestQueue);
if(!NT_SUCCESS(status))
{
KdPrint((__DRIVER_NAME
"WdfIoQueueCreate for manual queue failed with status 0x%08x\n", status));
return status;
}
return status;
}
NTSTATUS Ds4_AssignPdoContext(WDFDEVICE Device, PPDO_IDENTIFICATION_DESCRIPTION Description)
{
NTSTATUS status;
PDS4_DEVICE_DATA ds4 = Ds4GetData(Device);
KdPrint(("Initializing DS4 context...\n"));
// I/O Queue for pending IRPs
WDF_IO_QUEUE_CONFIG pendingUsbQueueConfig, notificationsQueueConfig;
// Create and assign queue for incoming interrupt transfer
WDF_IO_QUEUE_CONFIG_INIT(&pendingUsbQueueConfig, WdfIoQueueDispatchManual);
status = WdfIoQueueCreate(Device, &pendingUsbQueueConfig, WDF_NO_OBJECT_ATTRIBUTES, &ds4->PendingUsbInRequests);
if (!NT_SUCCESS(status))
{
KdPrint(("WdfIoQueueCreate failed 0x%x\n", status));
return status;
}
// Initialize periodic timer
WDF_TIMER_CONFIG timerConfig;
WDF_TIMER_CONFIG_INIT_PERIODIC(&timerConfig, Ds4_PendingUsbRequestsTimerFunc, DS4_QUEUE_FLUSH_PERIOD);
// Timer object attributes
WDF_OBJECT_ATTRIBUTES timerAttribs;
WDF_OBJECT_ATTRIBUTES_INIT(&timerAttribs);
// PDO is parent
timerAttribs.ParentObject = Device;
// Create timer
status = WdfTimerCreate(&timerConfig, &timerAttribs, &ds4->PendingUsbInRequestsTimer);
if (!NT_SUCCESS(status))
{
KdPrint(("WdfTimerCreate failed 0x%x\n", status));
return status;
}
// Create and assign queue for user-land notification requests
WDF_IO_QUEUE_CONFIG_INIT(¬ificationsQueueConfig, WdfIoQueueDispatchManual);
status = WdfIoQueueCreate(Device, ¬ificationsQueueConfig, WDF_NO_OBJECT_ATTRIBUTES, &ds4->PendingNotificationRequests);
if (!NT_SUCCESS(status))
{
KdPrint(("WdfIoQueueCreate failed 0x%x\n", status));
return status;
}
// Load/generate MAC address
// TODO: tidy up this region
WDFKEY keyParams, keyTargets, keyDS, keySerial;
UNICODE_STRING keyName, valueName;
status = WdfDriverOpenParametersRegistryKey(WdfGetDriver(), STANDARD_RIGHTS_ALL, WDF_NO_OBJECT_ATTRIBUTES, &keyParams);
if (!NT_SUCCESS(status))
{
KdPrint(("WdfDriverOpenParametersRegistryKey failed 0x%x\n", status));
return status;
}
RtlUnicodeStringInit(&keyName, L"Targets");
status = WdfRegistryCreateKey(keyParams, &keyName,
KEY_ALL_ACCESS, REG_OPTION_NON_VOLATILE, NULL, WDF_NO_OBJECT_ATTRIBUTES, &keyTargets);
if (!NT_SUCCESS(status))
{
KdPrint(("WdfRegistryCreateKey failed 0x%x\n", status));
return status;
}
RtlUnicodeStringInit(&keyName, L"DualShock");
status = WdfRegistryCreateKey(keyTargets, &keyName,
KEY_ALL_ACCESS, REG_OPTION_NON_VOLATILE, NULL, WDF_NO_OBJECT_ATTRIBUTES, &keyDS);
if (!NT_SUCCESS(status))
{
KdPrint(("WdfRegistryCreateKey failed 0x%x\n", status));
return status;
}
DECLARE_UNICODE_STRING_SIZE(serialPath, 4);
RtlUnicodeStringPrintf(&serialPath, L"%04d", Description->SerialNo);
status = WdfRegistryCreateKey(keyDS, &serialPath,
KEY_ALL_ACCESS, REG_OPTION_NON_VOLATILE, NULL, WDF_NO_OBJECT_ATTRIBUTES, &keySerial);
if (!NT_SUCCESS(status))
{
KdPrint(("WdfRegistryCreateKey failed 0x%x\n", status));
return status;
}
RtlUnicodeStringInit(&valueName, L"TargetMacAddress");
status = WdfRegistryQueryValue(keySerial, &valueName, sizeof(MAC_ADDRESS), &ds4->TargetMacAddress, NULL, NULL);
KdPrint(("MAC-Address: %02X:%02X:%02X:%02X:%02X:%02X\n",
ds4->TargetMacAddress.Vendor0,
ds4->TargetMacAddress.Vendor1,
ds4->TargetMacAddress.Vendor2,
ds4->TargetMacAddress.Nic0,
ds4->TargetMacAddress.Nic1,
ds4->TargetMacAddress.Nic2));
if (status == STATUS_OBJECT_NAME_NOT_FOUND)
{
GenerateRandomMacAddress(&ds4->TargetMacAddress);
status = WdfRegistryAssignValue(keySerial, &valueName, REG_BINARY, sizeof(MAC_ADDRESS), (PVOID)&ds4->TargetMacAddress);
if (!NT_SUCCESS(status))
{
KdPrint(("WdfRegistryAssignValue failed 0x%x\n", status));
return status;
}
}
else if (!NT_SUCCESS(status))
{
KdPrint(("WdfRegistryQueryValue failed 0x%x\n", status));
return status;
}
WdfRegistryClose(keySerial);
WdfRegistryClose(keyDS);
WdfRegistryClose(keyTargets);
WdfRegistryClose(keyParams);
return STATUS_SUCCESS;
}
NTSTATUS
kmdf1394_EvtDeviceAdd (
IN WDFDRIVER Driver,
IN PWDFDEVICE_INIT DeviceInit)
/*++
Routine Description:
EvtDeviceAdd is called by the framework in response to AddDevice
call from the PnP manager.
Arguments:
Driver - Handle to a framework driver object created in DriverEntry
DeviceInit - Pointer to a framework-allocated WDFDEVICE_INIT structure.
Return Value:
NTSTATUS
--*/
{
NTSTATUS ntStatus = STATUS_SUCCESS;
PDEVICE_EXTENSION deviceExtension;
WDF_PNPPOWER_EVENT_CALLBACKS pnpPowerCallbacks;
WDF_OBJECT_ATTRIBUTES fdoAttributes,lockAttributes;
WDFDEVICE device;
WDF_DEVICE_PNP_CAPABILITIES pnpCaps;
WDF_IO_QUEUE_CONFIG ioQueueConfig;
UNREFERENCED_PARAMETER (Driver);
PAGED_CODE();
Enter();
//
// Zero out the PnpPowerCallbacks structure.
//
WDF_PNPPOWER_EVENT_CALLBACKS_INIT(&pnpPowerCallbacks);
//
// Set Callbacks for any of the functions we are interested in.
// If no callback is set, Framework will take the default action
// by itself.
//
// These two callbacks set up and tear down hardware state,
// specifically that which only has to be done once.
//
pnpPowerCallbacks.EvtDevicePrepareHardware = kmdf1394_EvtPrepareHardware;
pnpPowerCallbacks.EvtDeviceReleaseHardware = kmdf1394_EvtReleaseHardware;
pnpPowerCallbacks.EvtDeviceSelfManagedIoCleanup = \
kmdf1394_EvtDeviceSelfManagedIoCleanup;
pnpPowerCallbacks.EvtDeviceD0Entry = kmdf1394_EvtDeviceD0Entry;
pnpPowerCallbacks.EvtDeviceD0Exit = kmdf1394_EvtDeviceD0Exit;
//
// Register the PnP and power callbacks. Power policy related callbacks
// will be registered// later in SotwareInit.
//
WdfDeviceInitSetPnpPowerEventCallbacks (DeviceInit, &pnpPowerCallbacks);
if (!NT_SUCCESS (ntStatus))
{
DoTraceLevelMessage(TRACE_LEVEL_ERROR,
TRACE_FLAG_PNP,
"WdfDeviceInitSetPnpPowerEventCallbacks failed %!STATUS!\n",
ntStatus);
return ntStatus;
}
//
// We'll allow multiple handles to be opened to this device driver
// so we'll set exclusivity to FALSE.
//
WdfDeviceInitSetExclusive (DeviceInit, FALSE);
//
// Specify the size and type of device context.
//
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE (&fdoAttributes, DEVICE_EXTENSION);
ntStatus = WdfDeviceCreate (&DeviceInit, &fdoAttributes, &device);
if (!NT_SUCCESS (ntStatus))
{
DoTraceLevelMessage(TRACE_LEVEL_ERROR,
TRACE_FLAG_PNP,
"WdfDeviceInitialize failed %!STATUS!\n",
ntStatus);
return ntStatus;
}
deviceExtension = GetDeviceContext (device);
deviceExtension->WdfDevice = device;
DoTraceLevelMessage(TRACE_LEVEL_INFORMATION,
TRACE_FLAG_PNP,
"PDO(0x%p) FDO(0x%p), Lower(0x%p) DevExt (0x%p)\n",
WdfDeviceWdmGetPhysicalDevice (device),
WdfDeviceWdmGetDeviceObject (device),
WdfDeviceWdmGetAttachedDevice(device),
deviceExtension);
//
// Tell the Framework that this device will need an interface so that
// application can interact with it.
//
ntStatus = WdfDeviceCreateDeviceInterface (
device,
(LPGUID) &GUID_KMDF_VDEV,
NULL);
if (!NT_SUCCESS (ntStatus))
{
DoTraceLevelMessage(TRACE_LEVEL_ERROR,
TRACE_FLAG_PNP,
"WdfDeviceCreateDeviceInterface failed %!STATUS!\n",
ntStatus);
return ntStatus;
}
//
// Tell the framework to set the SurpriseRemovalOK in the DeviceCaps so
// that you don't get the popup in usermode (on Win2K) when you surprise
// remove the device.
//
WDF_DEVICE_PNP_CAPABILITIES_INIT (&pnpCaps);
pnpCaps.SurpriseRemovalOK = WdfTrue;
WdfDeviceSetPnpCapabilities (device, &pnpCaps);
//
// save the device object we created as our physical device object
//
deviceExtension->PhysicalDeviceObject = \
WdfDeviceWdmGetPhysicalDevice (device);
if (NULL == deviceExtension->PhysicalDeviceObject)
{
DoTraceLevelMessage(TRACE_LEVEL_ERROR,
TRACE_FLAG_PNP,
"WdfDeviceWdmGetPhysicalDevice: NULL DeviceObject\n");
return STATUS_UNSUCCESSFUL;
}
//
// This is our default IoTarget representing the deviceobject
// we are attached to.
//
deviceExtension->StackIoTarget = WdfDeviceGetIoTarget(device);
deviceExtension->StackDeviceObject = WdfDeviceWdmGetAttachedDevice(device);
if (NULL == deviceExtension->StackDeviceObject)
{
DoTraceLevelMessage(TRACE_LEVEL_ERROR,
TRACE_FLAG_PNP,
"WdfDeviceWdmGetAttachedDevice: NULL DeviceObject\n");
return STATUS_UNSUCCESSFUL;
}
//
// Create a automanaged queue for dispatching ioctl requests.
// All other requests are automatically failed by the framework.
// By creating an automanaged queue we don't have to worry about
// PNP/Power synchronization.
// A default queue gets all the requests that are not
// configure-fowarded using WdfDeviceConfigureRequestDispatching.
//
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE (
&ioQueueConfig,
WdfIoQueueDispatchParallel);
ioQueueConfig.EvtIoDeviceControl = kmdf1394_EvtIoDeviceControl;
__analysis_assume(ioQueueConfig.EvtIoStop != 0);
ntStatus = WdfIoQueueCreate (
deviceExtension->WdfDevice,
&ioQueueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&deviceExtension->IoctlQueue);
__analysis_assume(ioQueueConfig.EvtIoStop == 0);
if (!NT_SUCCESS (ntStatus))
{
DoTraceLevelMessage(TRACE_LEVEL_ERROR,
TRACE_FLAG_PNP,
"WdfIoQueueCreate failed %!STATUS!\n",
ntStatus);
return ntStatus;
}
//
// Create an additional queue to hold bus reset requests.
//
WDF_IO_QUEUE_CONFIG_INIT (&ioQueueConfig, WdfIoQueueDispatchManual);
__analysis_assume(ioQueueConfig.EvtIoStop != 0);
ntStatus = WdfIoQueueCreate (
deviceExtension->WdfDevice,
&ioQueueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&deviceExtension->BusResetRequestsQueue);
__analysis_assume(ioQueueConfig.EvtIoStop == 0);
if(!NT_SUCCESS (ntStatus))
{
DoTraceLevelMessage(TRACE_LEVEL_ERROR,
TRACE_FLAG_PNP,
"Error Creating Reset Request Queue %!STATUS!\n",
ntStatus);
return ntStatus;
}
WDF_OBJECT_ATTRIBUTES_INIT (&lockAttributes);
lockAttributes.ParentObject = device;
ntStatus = WdfSpinLockCreate (&lockAttributes,&deviceExtension->CromSpinLock);
if(!NT_SUCCESS (ntStatus))
{
DoTraceLevelMessage(TRACE_LEVEL_ERROR,
TRACE_FLAG_PNP,
"WdfSpinLockCreate CromSpinLock failed %!STATUS!\n",
ntStatus);
return ntStatus;
}
WDF_OBJECT_ATTRIBUTES_INIT (&lockAttributes);
lockAttributes.ParentObject = device;
ntStatus = WdfSpinLockCreate (
&lockAttributes,
&deviceExtension->AsyncSpinLock);
if(!NT_SUCCESS (ntStatus))
{
DoTraceLevelMessage(TRACE_LEVEL_ERROR,
TRACE_FLAG_PNP,
"WdfSpinLockCreate AsyncSpinLock failed %!STATUS!\n",
ntStatus);
return ntStatus;
}
WDF_OBJECT_ATTRIBUTES_INIT (&lockAttributes);
lockAttributes.ParentObject = device;
ntStatus = WdfSpinLockCreate (
&lockAttributes,
&deviceExtension->IsochSpinLock );
if(!NT_SUCCESS (ntStatus))
{
DoTraceLevelMessage(TRACE_LEVEL_ERROR,
TRACE_FLAG_PNP,
"WdfSpinLockCreate IsochSpinLock failed %!STATUS!\n",
ntStatus);
return ntStatus;
}
WDF_OBJECT_ATTRIBUTES_INIT (&lockAttributes);
lockAttributes.ParentObject = device;
ntStatus = WdfSpinLockCreate (
&lockAttributes,
&deviceExtension->IsochResourceSpinLock);
if(!NT_SUCCESS (ntStatus))
{
DoTraceLevelMessage(TRACE_LEVEL_ERROR,
TRACE_FLAG_PNP,
"WdfSpinLockCreate IsochResourceSpinLock failed %!STATUS!\n",
ntStatus);
return ntStatus;
}
InitializeListHead (&deviceExtension->CromData);
InitializeListHead (&deviceExtension->AsyncAddressData);
InitializeListHead (&deviceExtension->IsochDetachData);
InitializeListHead (&deviceExtension->IsochResourceData);
ExitS(ntStatus);
return(ntStatus);
} // kmdf1394_PnpAddDevice
VOID Pipe_InitQueueConfig(
__in PPIPE_CONTEXT pipeContext,
__out WDF_IO_QUEUE_CONFIG* queueConfig)
{
WDF_DRIVER_VERSION_AVAILABLE_PARAMS verParams;
if (!pipeContext->Pipe)
{
// Default (Control) pipe
WDF_IO_QUEUE_CONFIG_INIT(queueConfig, WdfIoQueueDispatchSequential);
queueConfig->EvtIoDeviceControl = PipeQueue_OnIoControl;
return;
}
if (pipeContext->PipeInformation.PipeType == WdfUsbPipeTypeIsochronous || pipeContext->Policies.RawIO)
{
USBDBGN("Configuring parallel queue..");
WDF_IO_QUEUE_CONFIG_INIT(queueConfig, WdfIoQueueDispatchParallel);
/*
NOTE: WinUSB does not support RawIO OUT transfers; libusbK does.
http://msdn.microsoft.com/en-us/library/windows/hardware/ff728833%28v=vs.85%29.aspx
In libusbK, RawIO means we use a parallel queue. Any pipe policies or functionality
that could cause multiple IO transactions per request are no longer supported. IE:
Transfer splitting, ALLOW_ARTIAL_READS, AUTO_FLUSH, IGNORE_SHORT_PACKETS, SHORT_PACKET_TERMINATE.
*/
WDF_DRIVER_VERSION_AVAILABLE_PARAMS_INIT(&verParams, KMDF_MAJOR_VERSION, KMDF_MINOR_VERSION);
if (WdfDriverIsVersionAvailable(gWdfDriver, &verParams))
{
# if ((KMDF_MAJOR_VERSION==1 && KMDF_MINOR_VERSION >= 9) || (KMDF_MAJOR_VERSION > 1))
if (pipeContext->SimulParallelRequests)
queueConfig->Settings.Parallel.NumberOfPresentedRequests = pipeContext->SimulParallelRequests;
# endif
}
else
{
DbgPrint("Expected library version %u.%u!\n",KMDF_MAJOR_VERSION, KMDF_MINOR_VERSION);
}
}
else
{
USBDBGN("Configuring sequential queue..");
WDF_IO_QUEUE_CONFIG_INIT(queueConfig, WdfIoQueueDispatchSequential);
queueConfig->EvtIoStop = Queue_OnStop;
queueConfig->EvtIoResume = Queue_OnResume;
}
queueConfig->EvtIoDeviceControl = PipeQueue_OnIoControl;
if (USB_ENDPOINT_DIRECTION_IN(pipeContext->PipeInformation.EndpointAddress))
{
queueConfig->EvtIoRead = PipeQueue_OnRead;
}
else
{
queueConfig->EvtIoWrite = PipeQueue_OnWrite;
queueConfig->AllowZeroLengthRequests = TRUE;
}
}
NTSTATUS
NfcCxEvtDeviceInitialize(
_In_ PNFCCX_DRIVER_GLOBALS NfcCxGlobals,
_In_ WDFDEVICE Device
)
/*++
Routine Description:
This routine is called by the CX client to indicate
that a device initialization is required.
Arguments:
NfcCxGlobal - CX global pointer
Device - WDF device to initialize
Return Value:
NTSTATUS
--*/
{
NTSTATUS status = STATUS_SUCCESS;
WDF_OBJECT_ATTRIBUTES fdoAttributes;
WDF_DEVICE_POWER_POLICY_IDLE_SETTINGS idleSettings;
WDF_IO_QUEUE_CONFIG queueConfig;
PNFCCX_FDO_CONTEXT fdoContext;
WDFQUEUE queue;
PNFCCX_CLIENT_GLOBALS nfcCxClientGlobal;
WDF_OBJECT_ATTRIBUTES objectAttrib;
TRACE_FUNCTION_ENTRY(LEVEL_VERBOSE);
if (!VerifyPrivateGlobals(NfcCxGlobals)) {
TRACE_LINE(LEVEL_ERROR, "Invalid CX global pointer");
status = STATUS_INVALID_PARAMETER;
goto Done;
}
nfcCxClientGlobal = GetPrivateGlobals(NfcCxGlobals);
//
// Create class extension device context
//
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&fdoAttributes, NFCCX_FDO_CONTEXT);
fdoAttributes.EvtCleanupCallback = NfcCxFdoContextCleanup;
status = WdfObjectAllocateContext(Device, &fdoAttributes, (PVOID*)&fdoContext);
if (!NT_SUCCESS(status)) {
TRACE_LINE(LEVEL_ERROR, "Failed to allocate the client context");
goto Done;
}
fdoContext->Device = Device;
fdoContext->NfpRadioInterfaceCreated = FALSE;
fdoContext->NfpPowerOffSystemOverride = FALSE;
fdoContext->NfpPowerOffPolicyOverride = FALSE;
fdoContext->NfpPowerPolicyReferences = 0;
fdoContext->SERadioInterfaceCreated = FALSE;
fdoContext->SEPowerOffSystemOverride = FALSE;
fdoContext->SEPowerOffPolicyOverride = FALSE;
fdoContext->SEPowerPolicyReferences = 0;
fdoContext->NfcCxClientGlobal = nfcCxClientGlobal;
status = NfcCxFdoReadCxDriverRegistrySettings(&fdoContext->LogNciDataMessages);
if (!NT_SUCCESS(status)) {
TRACE_LINE(LEVEL_ERROR, "NfcCxFdoReadCxDriverRegistrySettings failed, %!STATUS!", status);
goto Done;
}
WDF_OBJECT_ATTRIBUTES_INIT(&objectAttrib);
objectAttrib.ParentObject = Device;
status = WdfWaitLockCreate(&objectAttrib,
&fdoContext->PowerPolicyWaitLock);
if (!NT_SUCCESS(status)) {
TRACE_LINE(LEVEL_ERROR, "Failed to create the PowerPolicy WaitLock, %!STATUS!", status);
goto Done;
}
//
// Register I/O callbacks to tell the framework that you are interested
// in handling IRP_MJ_DEVICE_CONTROL requests.
//
// In case a specific handler is not specified for one of these,
// the request will be dispatched to the EvtIoDefault handler, if any.
// If there is no EvtIoDefault handler, the request will be failed with
// STATUS_INVALID_DEVICE_REQUEST.
//
// WdfIoQueueDispatchParallel means that we are capable of handling
// all the I/O request simultaneously and we are responsible for protecting
// data that could be accessed by these callbacks simultaneously.
// A default queue gets all the requests that are not
// configure-fowarded using WdfDeviceConfigureRequestDispatching.
//
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE(&queueConfig,
WdfIoQueueDispatchParallel);
//
// Our default queue is non power managed. Based on the request and the Radio on/off
// state, we forward the request to the power managed queue to wake the system as
// appropriate
//
queueConfig.PowerManaged = WdfFalse;
queueConfig.EvtIoDeviceControl = NfcCxEvtDefaultIoControl;
WDF_OBJECT_ATTRIBUTES_INIT(&objectAttrib);
objectAttrib.ParentObject = Device;
status = WdfIoQueueCreate(Device,
&queueConfig,
&objectAttrib,
&queue
);
if (!NT_SUCCESS (status)) {
TRACE_LINE(LEVEL_ERROR, "WdfIoQueueCreate failed %!STATUS!", status);
goto Done;
}
fdoContext->DefaultQueue = queue;
//
// Our internal queue is non power managed because we need to send IO during.
// D0Entry/D0Exit routines. It is the default queue for SelfIoTarget requests.
//
WDF_IO_QUEUE_CONFIG_INIT(&queueConfig,
WdfIoQueueDispatchParallel);
queueConfig.PowerManaged = WdfFalse;
queueConfig.EvtIoDeviceControl = NfcCxEvtSelfIoControl;
WDF_OBJECT_ATTRIBUTES_INIT(&objectAttrib);
objectAttrib.ParentObject = Device;
status = WdfIoQueueCreate(Device,
&queueConfig,
&objectAttrib,
&queue
);
if (!NT_SUCCESS (status)) {
TRACE_LINE(LEVEL_ERROR, "WdfIoQueueCreate failed %!STATUS!", status);
goto Done;
}
fdoContext->SelfQueue = queue;
//
// Assign our internal queue as the default queue for the SelfIoTarget. Any IO
// sent to the SelfIoTarget would be dispatched from this queue.
//
status = WdfIoTargetSelfAssignDefaultIoQueue(WdfDeviceGetSelfIoTarget(Device),
fdoContext->SelfQueue);
if (!NT_SUCCESS (status)) {
TRACE_LINE(LEVEL_ERROR, "WdfIoTargetSelfAssignDefaultIoQueue failed %!STATUS!", status);
goto Done;
}
status = NfcCxFdoCreate(fdoContext);
if (!NT_SUCCESS(status)) {
TRACE_LINE(LEVEL_ERROR, "Failed to create the Fdo context failed %!STATUS!", status);
goto Done;
}
if (NFC_CX_DEVICE_MODE_NCI == fdoContext->NfcCxClientGlobal->Config.DeviceMode) {
//
// Read the FDO's persisted settings from the registry
//
status = NfcCxFdoReadPersistedDeviceRegistrySettings(fdoContext);
if (!NT_SUCCESS(status)) {
TRACE_LINE(LEVEL_ERROR, "NfcCxFdoReadPersistedDeviceRegistrySettings, %!STATUS!", status);
goto Done;
}
//
// Log all settings that could have been overridden from the registry.
//
EventWriteDevicePersistedRegistrySettings(fdoContext->NfpPowerOffPolicyOverride,
fdoContext->NfpPowerOffSystemOverride,
fdoContext->SEPowerOffPolicyOverride,
fdoContext->SEPowerOffSystemOverride);
//
// Check the currently required power state
//
fdoContext->NfpRadioState = (!fdoContext->NfpPowerOffPolicyOverride && !fdoContext->NfpPowerOffSystemOverride);
fdoContext->SERadioState = (!fdoContext->SEPowerOffPolicyOverride && !fdoContext->SEPowerOffSystemOverride);
}
//
// The class extension is the default power policy owner. This option allows the client
// to now be the power policy owner
//
if (fdoContext->NfcCxClientGlobal->Config.IsPowerPolicyOwner == WdfUseDefault) {
fdoContext->NfcCxClientGlobal->Config.IsPowerPolicyOwner = WdfFalse;
}
if (fdoContext->NfcCxClientGlobal->Config.IsPowerPolicyOwner == WdfFalse) {
//
// Set the idle power policy to put the device to Dx if the device is not used
// for the specified IdleTimeout time. Since this is a non wakeable device we
// tell the framework that we cannot wake ourself if we sleep in S0. Only
// way the device can be brought to D0 is if the device recieves an I/O from
// the system.
//
WDF_DEVICE_POWER_POLICY_IDLE_SETTINGS_INIT(&idleSettings, IdleCannotWakeFromS0);
idleSettings.IdleTimeoutType = fdoContext->NfcCxClientGlobal->Config.PowerIdleType;
idleSettings.IdleTimeout = fdoContext->NfcCxClientGlobal->Config.PowerIdleTimeout;
status = WdfDeviceAssignS0IdleSettings(Device, &idleSettings);
if (!NT_SUCCESS(status)) {
TRACE_LINE(LEVEL_ERROR, "WdfDeviceAssignS0IdleSettings failed %!STATUS!", status);
goto Done;
}
}
Done:
TRACE_FUNCTION_EXIT_NTSTATUS(LEVEL_VERBOSE, status);
TRACE_LOG_NTSTATUS_ON_FAILURE(status);
return status;
}
NTSTATUS
SingleCompEvtDeviceAdd(
_In_ WDFDRIVER Driver,
_Inout_ PWDFDEVICE_INIT DeviceInit
)
/*++
Routine Description:
EvtDeviceAdd is called by UMDF in response to AddDevice call from
the PnP manager.
Arguments:
Driver - Handle to the UMDF driver object created in DriverEntry
DeviceInit - Pointer to a framework-allocated WDFDEVICE_INIT structure.
Return Value:
An NTSTATUS value representing success or failure of the function.
--*/
{
NTSTATUS status;
WDFDEVICE device;
WDFQUEUE queue;
WDF_IO_QUEUE_CONFIG queueConfig;
FDO_DATA *fdoContext = NULL;
WDF_OBJECT_ATTRIBUTES objectAttributes;
WDF_PNPPOWER_EVENT_CALLBACKS pnpCallbacks;
UNREFERENCED_PARAMETER(Driver);
WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&objectAttributes, FDO_DATA);
WDF_PNPPOWER_EVENT_CALLBACKS_INIT(&pnpCallbacks);
pnpCallbacks.EvtDeviceD0Entry = SingleCompEvtDeviceD0Entry;
pnpCallbacks.EvtDeviceD0Exit = SingleCompEvtDeviceD0Exit;
WdfDeviceInitSetPnpPowerEventCallbacks(DeviceInit, &pnpCallbacks);
status = WdfDeviceCreate(&DeviceInit, &objectAttributes, &device);
if (!NT_SUCCESS(status)) {
Trace(TRACE_LEVEL_ERROR,
"%!FUNC! - WdfDeviceCreate failed with %!status!.",
status);
goto exit;
}
fdoContext = FdoGetContext(device);
//
// Our initial state is active
//
fdoContext->IsActive = TRUE;
//
// Create a power-managed queue for IOCTL requests.
//
WDF_IO_QUEUE_CONFIG_INIT(&queueConfig,
WdfIoQueueDispatchParallel);
queueConfig.EvtIoDeviceControl = SingleCompEvtIoDeviceControl;
//
// By default, Static Driver Verifier (SDV) displays a warning if it
// doesn't find the EvtIoStop callback on a power-managed queue.
// The 'assume' below causes SDV to suppress this warning. If the driver
// has not explicitly set PowerManaged to WdfFalse, the framework creates
// power-managed queues when the device is not a filter driver. Normally
// the EvtIoStop is required for power-managed queues, but for this driver
// it is not needed b/c the driver doesn't hold on to the requests or
// forward them to other drivers. This driver completes the requests
// directly in the queue's handlers. If the EvtIoStop callback is not
// implemented, the framework waits for all driver-owned requests to be
// done before moving in the Dx/sleep states or before removing the
// device, which is the correct behavior for this type of driver.
// If the requests were taking an indeterminate amount of time to complete,
// or if the driver forwarded the requests to a lower driver/another stack,
// the queue should have an EvtIoStop/EvtIoResume.
//
__analysis_assume(queueConfig.EvtIoStop != 0);
status = WdfIoQueueCreate(device,
&queueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&queue);
__analysis_assume(queueConfig.EvtIoStop == 0);
if (FALSE == NT_SUCCESS (status)) {
Trace(TRACE_LEVEL_ERROR,
"%!FUNC! - WdfIoQueueCreate for IoDeviceControl failed with %!status!.",
status);
goto exit;
}
status = WdfDeviceConfigureRequestDispatching(device,
queue,
WdfRequestTypeDeviceControl);
if (FALSE == NT_SUCCESS (status)) {
Trace(TRACE_LEVEL_ERROR,
"%!FUNC! - WdfDeviceConfigureRequestDispatching for "
"WdfRequestTypeDeviceControl failed with %!status!.",
status);
goto exit;
}
status = AssignS0IdleSettings(device);
if (!NT_SUCCESS(status)) {
goto exit;
}
//
// Create a device interface so that applications can open a handle to this
// device.
//
status = WdfDeviceCreateDeviceInterface(device,
&GUID_DEVINTERFACE_POWERFX,
NULL /* ReferenceString */);
if (FALSE == NT_SUCCESS(status)) {
Trace(TRACE_LEVEL_ERROR,
"%!FUNC! - WdfDeviceCreateDeviceInterface failed with %!status!.",
status);
goto exit;
}
//
// Initialize the hardware simulator
//
status = HwSimInitialize(device);
if (FALSE == NT_SUCCESS(status)) {
goto exit;
}
exit:
return status;
}
NTSTATUS
SimSensorDriverDeviceAdd (
WDFDRIVER Driver,
PWDFDEVICE_INIT DeviceInit
)
/*++
Routine Description:
EvtDriverDeviceAdd is called by the framework in response to AddDevice call
from the PnP manager. A WDF device object is created and initialized to
represent a new instance of the battery device.
Arguments:
Driver - Supplies a handle to the WDF Driver object.
DeviceInit - Supplies a pointer to a framework-allocated WDFDEVICE_INIT
structure.
Return Value:
NTSTATUS
--*/
{
WDF_OBJECT_ATTRIBUTES DeviceAttributes;
WDFDEVICE DeviceHandle;
PFDO_DATA DevExt;
BOOLEAN LockHeld;
WDF_IO_QUEUE_CONFIG PendingRequestQueueConfig;
WDF_PNPPOWER_EVENT_CALLBACKS PnpPowerCallbacks;
WDFQUEUE Queue;
WDF_IO_QUEUE_CONFIG QueueConfig;
NTSTATUS Status;
WDF_OBJECT_ATTRIBUTES WorkitemAttributes;
WDF_WORKITEM_CONFIG WorkitemConfig;
UNREFERENCED_PARAMETER(Driver);
DebugEnter();
PAGED_CODE();
LockHeld = FALSE;
//
// Initialize attributes and a context area for the device object.
//
WDF_OBJECT_ATTRIBUTES_INIT(&DeviceAttributes);
WDF_OBJECT_ATTRIBUTES_SET_CONTEXT_TYPE(&DeviceAttributes, FDO_DATA);
//
// Initailize power callbacks
//
WDF_PNPPOWER_EVENT_CALLBACKS_INIT(&PnpPowerCallbacks);
PnpPowerCallbacks.EvtDeviceD0Entry = SimSensorDeviceD0Entry;
PnpPowerCallbacks.EvtDeviceD0Exit = SimSensorDeviceD0Exit;
PnpPowerCallbacks.EvtDeviceSelfManagedIoSuspend =
SimSensorSelfManagedIoSuspend;
WdfDeviceInitSetPnpPowerEventCallbacks(DeviceInit, &PnpPowerCallbacks);
//
// Create a framework device object. This call will in turn create
// a WDM device object, attach to the lower stack, and set the
// appropriate flags and attributes.
//
Status = WdfDeviceCreate(&DeviceInit, &DeviceAttributes, &DeviceHandle);
if (!NT_SUCCESS(Status)) {
DebugPrint(SIMSENSOR_ERROR,
"WdfDeviceCreate() Failed. 0x%x\n",
Status);
goto DriverDeviceAddEnd;
}
DevExt = GetDeviceExtension(DeviceHandle);
//
// Configure a default queue for IO requests. This queue processes requests
// to read the sensor state.
//
WDF_IO_QUEUE_CONFIG_INIT_DEFAULT_QUEUE(&QueueConfig,
WdfIoQueueDispatchParallel);
QueueConfig.EvtIoDeviceControl = SimSensorIoDeviceControl;
//
// The system uses IoInternalDeviceControl requests to communicate with the
// ACPI driver on the device stack. For proper operation of thermal zones,
// these requests must be forwarded unless the driver knows how to handle
// them.
//
QueueConfig.EvtIoInternalDeviceControl = SimSensorIoInternalDeviceControl;
Status = WdfIoQueueCreate(DeviceHandle,
&QueueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&Queue);
if (!NT_SUCCESS(Status)) {
DebugPrint(SIMSENSOR_ERROR,
"WdfIoQueueCreate() (Default) Failed. 0x%x\n",
Status);
goto DriverDeviceAddEnd;
}
//
// Configure a manual dispatch queue for pending requests. This queue
// stores requests to read the sensor state which can't be retired
// immediately.
//
WDF_IO_QUEUE_CONFIG_INIT(&PendingRequestQueueConfig,
WdfIoQueueDispatchManual);
Status = WdfIoQueueCreate(DeviceHandle,
&PendingRequestQueueConfig,
WDF_NO_OBJECT_ATTRIBUTES,
&DevExt->PendingRequestQueue);
PendingRequestQueueConfig.EvtIoStop = SimSensorQueueIoStop;
if (!NT_SUCCESS(Status)) {
DebugPrint(SIMSENSOR_ERROR,
"WdfIoQueueCreate() (Pending) Failed. 0x%x\n",
Status);
goto DriverDeviceAddEnd;
}
//
// Configure a workitem to process the simulated interrupt.
//
WDF_OBJECT_ATTRIBUTES_INIT(&WorkitemAttributes);
WorkitemAttributes.ParentObject = DeviceHandle;
WDF_WORKITEM_CONFIG_INIT(&WorkitemConfig,
SimSensorTemperatureInterruptWorker);
Status = WdfWorkItemCreate(&WorkitemConfig,
&WorkitemAttributes,
&DevExt->InterruptWorker);
if (!NT_SUCCESS(Status)) {
DebugPrint(SIMSENSOR_ERROR,
"WdfWorkItemCreate() Failed. 0x%x\n",
Status);
goto DriverDeviceAddEnd;
}
//
// Create the request queue waitlock.
//
Status = WdfWaitLockCreate(NULL, &DevExt->QueueLock);
if (!NT_SUCCESS(Status)) {
DebugPrint(SIMSENSOR_ERROR,
"WdfWaitLockCreate() Failed. Status 0x%x\n",
Status);
goto DriverDeviceAddEnd;
}
//
// Initilize the simulated sensor hardware.
//
DevExt->Sensor.LowerBound = 0;
DevExt->Sensor.UpperBound = (ULONG)-1;
DevExt->Sensor.Temperature = VIRTUAL_SENSOR_RESET_TEMPERATURE;
Status = WdfWaitLockCreate(NULL, &DevExt->Sensor.Lock);
if (!NT_SUCCESS(Status)) {
DebugPrint(SIMSENSOR_ERROR,
"WdfWaitLockCreate() Failed. 0x%x\n",
Status);
goto DriverDeviceAddEnd;
}
DriverDeviceAddEnd:
DebugExitStatus(Status);
return Status;
}