/* ----- function definitions ---------- */
int
main ( void )
{
LALStatus XLAL_INIT_DECL(status);
SFTCatalog *catalog = NULL;
SFTConstraints XLAL_INIT_DECL(constraints);
MultiSFTVector *multiSFTs = NULL;
MultiPSDVector *multiPSDs = NULL;
MultiNoiseWeights *multiWeightsXLAL = NULL;
MultiNoiseWeights *multiWeightsCorrect = NULL;
UINT4 rngmedBins = 11;
REAL8 tolerance = 2e-6; /* same algorithm, should be basically identical results */
/* Construct the "correct" weights, calculated using the old LAL routines */
UINT4 numIFOsCorrect = 2;
XLAL_CHECK ( ( multiWeightsCorrect = XLALCalloc ( 1, sizeof(*multiWeightsCorrect ) ) ) != NULL, XLAL_ENOMEM );
multiWeightsCorrect->length = numIFOsCorrect;
multiWeightsCorrect->Sinv_Tsft = 1.980867126449e+52;
XLAL_CHECK ( ( multiWeightsCorrect->data = XLALCalloc ( numIFOsCorrect, sizeof(*multiWeightsCorrect->data ) ) ) != NULL, XLAL_ENOMEM );
XLAL_CHECK ( ( multiWeightsCorrect->data[0] = XLALCreateREAL8Vector(4) ) != NULL, XLAL_ENOMEM );
multiWeightsCorrect->data[0]->data[0] = 6.425160659487e-05;
multiWeightsCorrect->data[0]->data[1] = 7.259453662367e-06;
multiWeightsCorrect->data[0]->data[2] = 9.838893684664e-04;
multiWeightsCorrect->data[0]->data[3] = 5.043766789923e-05;
XLAL_CHECK ( ( multiWeightsCorrect->data[1] = XLALCreateREAL8Vector(3) ) != NULL, XLAL_ENOMEM );
multiWeightsCorrect->data[1]->data[0] = 1.582309910283e-04;
multiWeightsCorrect->data[1]->data[1] = 5.345673753744e-04;
multiWeightsCorrect->data[1]->data[2] = 6.998201363537e+00;
/* Construct the catalog */
XLAL_CHECK ( ( catalog = XLALSFTdataFind ( TEST_DATA_DIR "MultiNoiseWeightsTest*.sft", &constraints ) ) != NULL, XLAL_EFUNC, " XLALSFTdataFind failed\n" );
/* Load the SFTs */
XLAL_CHECK ( ( multiSFTs = XLALLoadMultiSFTs ( catalog, -1, -1 ) ) != NULL, XLAL_EFUNC, " XLALLoadMultiSFTs failed\n" );
/* calculate the psd and normalize the SFTs */
XLAL_CHECK ( ( multiPSDs = XLALNormalizeMultiSFTVect ( multiSFTs, rngmedBins, NULL ) ) != NULL, XLAL_EFUNC, " XLALNormalizeMultiSFTVect failed\n" );
/* Get weights using XLAL function */
XLAL_CHECK ( ( multiWeightsXLAL = XLALComputeMultiNoiseWeights ( multiPSDs, rngmedBins, 0 ) ) != NULL, XLAL_EFUNC, " XLALComputeMultiNoiseWeights failed\n" );
/* Compare XLAL weights to reference */
XLAL_CHECK ( XLALCompareMultiNoiseWeights ( multiWeightsXLAL, multiWeightsCorrect, tolerance ) == XLAL_SUCCESS, XLAL_EFAILED, "Comparison between XLAL and reference MultiNoiseWeights failed\n" );
/* Clean up memory */
XLALDestroyMultiNoiseWeights ( multiWeightsCorrect );
XLALDestroyMultiNoiseWeights ( multiWeightsXLAL );
XLALDestroyMultiPSDVector ( multiPSDs );
XLALDestroyMultiSFTVector ( multiSFTs );
XLALDestroySFTCatalog ( catalog );
/* check for memory-leaks */
LALCheckMemoryLeaks();
return XLAL_SUCCESS;
} /* main() */
int main(int argc, char *argv[]){
UserInput_t XLAL_INIT_DECL(uvar);
static ConfigVariables config;
/* sft related variables */
MultiSFTVector *inputSFTs = NULL;
MultiPSDVector *multiPSDs = NULL;
MultiNoiseWeights *multiWeights = NULL;
MultiLIGOTimeGPSVector *multiTimes = NULL;
MultiLALDetector multiDetectors;
MultiDetectorStateSeries *multiStates = NULL;
MultiAMCoeffs *multiCoeffs = NULL;
SFTIndexList *sftIndices = NULL;
SFTPairIndexList *sftPairs = NULL;
REAL8Vector *shiftedFreqs = NULL;
UINT4Vector *lowestBins = NULL;
COMPLEX8Vector *expSignalPhases = NULL;
REAL8VectorSequence *sincList = NULL;
PulsarDopplerParams XLAL_INIT_DECL(dopplerpos);
PulsarDopplerParams thisBinaryTemplate, binaryTemplateSpacings;
PulsarDopplerParams minBinaryTemplate, maxBinaryTemplate;
SkyPosition XLAL_INIT_DECL(skyPos);
MultiSSBtimes *multiBinaryTimes = NULL;
INT4 k;
UINT4 j;
REAL8 fMin, fMax; /* min and max frequencies read from SFTs */
REAL8 deltaF; /* frequency resolution associated with time baseline of SFTs */
REAL8 diagff = 0; /*diagonal metric components*/
REAL8 diagaa = 0;
REAL8 diagTT = 0;
REAL8 diagpp = 1;
REAL8 ccStat = 0;
REAL8 evSquared=0;
REAL8 estSens=0; /*estimated sensitivity(4.13)*/
BOOLEAN dopplerShiftFlag = TRUE;
toplist_t *ccToplist=NULL;
CrossCorrBinaryOutputEntry thisCandidate;
UINT4 checksum;
LogPrintf (LOG_CRITICAL, "Starting time\n"); /*for debug convenience to record calculating time*/
/* initialize and register user variables */
LIGOTimeGPS computingStartGPSTime, computingEndGPSTime;
XLALGPSTimeNow (&computingStartGPSTime); /* record the rough starting GPS time*/
if ( XLALInitUserVars( &uvar ) != XLAL_SUCCESS ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALInitUserVars() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
/* read user input from the command line or config file */
if ( XLALUserVarReadAllInput ( argc, argv ) != XLAL_SUCCESS ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALUserVarReadAllInput() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
if (uvar.help) /* if help was requested, then exit */
return 0;
CHAR *VCSInfoString = XLALGetVersionString(0); /**<LAL + LALapps Vsersion string*/
/*If the version information was requested, output it and exit*/
if ( uvar.version ){
XLAL_CHECK ( VCSInfoString != NULL, XLAL_EFUNC, "XLALGetVersionString(0) failed.\n" );
printf ("%s\n", VCSInfoString );
exit (0);
}
/* configure useful variables based on user input */
if ( XLALInitializeConfigVars ( &config, &uvar) != XLAL_SUCCESS ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALInitUserVars() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
deltaF = config.catalog->data[0].header.deltaF;
REAL8 Tsft = 1.0 / deltaF;
if (XLALUserVarWasSet(&uvar.spacingF) && XLALUserVarWasSet(&uvar.mismatchF))
LogPrintf (LOG_CRITICAL, "spacingF and mismatchF are both set, use spacingF %.9g by default\n\n", uvar.spacingF);
if (XLALUserVarWasSet(&uvar.spacingA) && XLALUserVarWasSet(&uvar.mismatchA))
LogPrintf (LOG_CRITICAL, "spacingA and mismatchA are both set, use spacingA %.9g by default\n\n", uvar.spacingA);
if (XLALUserVarWasSet(&uvar.spacingT) && XLALUserVarWasSet(&uvar.mismatchT))
LogPrintf (LOG_CRITICAL, "spacingT and mismatchT are both set, use spacingT %.9g by default\n\n", uvar.spacingT);
if (XLALUserVarWasSet(&uvar.spacingP) && XLALUserVarWasSet(&uvar.mismatchP))
LogPrintf (LOG_CRITICAL, "spacingP and mismatchP are both set, use spacingP %.9g by default\n\n", uvar.spacingP);
/* create the toplist */
create_crossCorrBinary_toplist( &ccToplist, uvar.numCand);
/* now read the data */
/* /\* get SFT parameters so that we can initialise search frequency resolutions *\/ */
/* /\* calculate deltaF_SFT *\/ */
/* deltaF_SFT = catalog->data[0].header.deltaF; /\* frequency resolution *\/ */
/* timeBase= 1.0/deltaF_SFT; /\* sft baseline *\/ */
/* /\* catalog is ordered in time so we can get start, end time and tObs *\/ */
/* firstTimeStamp = catalog->data[0].header.epoch; */
/* lastTimeStamp = catalog->data[catalog->length - 1].header.epoch; */
/* tObs = XLALGPSDiff( &lastTimeStamp, &firstTimeStamp ) + timeBase; */
/* /\*set pulsar reference time *\/ */
/* if (LALUserVarWasSet ( &uvar_refTime )) { */
/* XLALGPSSetREAL8(&refTime, uvar_refTime); */
/* } */
/* else { /\*if refTime is not set, set it to midpoint of sfts*\/ */
/* XLALGPSSetREAL8(&refTime, (0.5*tObs) + XLALGPSGetREAL8(&firstTimeStamp)); */
/* } */
/* /\* set frequency resolution defaults if not set by user *\/ */
/* if (!(LALUserVarWasSet (&uvar_fResolution))) { */
/* uvar_fResolution = 1/tObs; */
/* } */
/* { */
/* /\* block for calculating frequency range to read from SFTs *\/ */
/* /\* user specifies freq and fdot range at reftime */
/* we translate this range of fdots to start and endtime and find */
/* the largest frequency band required to cover the */
/* frequency evolution *\/ */
/* PulsarSpinRange spinRange_startTime; /\**< freq and fdot range at start-time of observation *\/ */
/* PulsarSpinRange spinRange_endTime; /\**< freq and fdot range at end-time of observation *\/ */
/* PulsarSpinRange spinRange_refTime; /\**< freq and fdot range at the reference time *\/ */
/* REAL8 startTime_freqLo, startTime_freqHi, endTime_freqLo, endTime_freqHi, freqLo, freqHi; */
/* REAL8Vector *fdotsMin=NULL; */
/* REAL8Vector *fdotsMax=NULL; */
/* UINT4 k; */
/* fdotsMin = (REAL8Vector *)LALCalloc(1, sizeof(REAL8Vector)); */
/* fdotsMin->length = N_SPINDOWN_DERIVS; */
/* fdotsMin->data = (REAL8 *)LALCalloc(fdotsMin->length, sizeof(REAL8)); */
/* fdotsMax = (REAL8Vector *)LALCalloc(1, sizeof(REAL8Vector)); */
/* fdotsMax->length = N_SPINDOWN_DERIVS; */
/* fdotsMax->data = (REAL8 *)LALCalloc(fdotsMax->length, sizeof(REAL8)); */
/* XLAL_INIT_MEM(spinRange_startTime); */
/* XLAL_INIT_MEM(spinRange_endTime); */
/* XLAL_INIT_MEM(spinRange_refTime); */
/* spinRange_refTime.refTime = refTime; */
/* spinRange_refTime.fkdot[0] = uvar_f0; */
/* spinRange_refTime.fkdotBand[0] = uvar_fBand; */
/* } */
/* FIXME: need to correct fMin and fMax for Doppler shift, rngmedian bins and spindown range */
/* this is essentially just a place holder for now */
/* FIXME: this running median buffer is overkill, since the running median block need not be centered on the search frequency */
REAL8 vMax = LAL_TWOPI * (uvar.orbitAsiniSec + uvar.orbitAsiniSecBand) / uvar.orbitPSec + LAL_TWOPI * LAL_REARTH_SI / (LAL_DAYSID_SI * LAL_C_SI) + LAL_TWOPI * LAL_AU_SI/(LAL_YRSID_SI * LAL_C_SI); /*calculate the maximum relative velocity in speed of light*/
fMin = uvar.fStart * (1 - vMax) - 0.5 * uvar.rngMedBlock * deltaF;
fMax = (uvar.fStart + uvar.fBand) * (1 + vMax) + 0.5 * uvar.rngMedBlock * deltaF;
/* read the SFTs*/
if ((inputSFTs = XLALLoadMultiSFTs ( config.catalog, fMin, fMax)) == NULL){
LogPrintf ( LOG_CRITICAL, "%s: XLALLoadMultiSFTs() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
/* calculate the psd and normalize the SFTs */
if (( multiPSDs = XLALNormalizeMultiSFTVect ( inputSFTs, uvar.rngMedBlock, NULL )) == NULL){
LogPrintf ( LOG_CRITICAL, "%s: XLALNormalizeMultiSFTVect() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
/* compute the noise weights for the AM coefficients */
if (( multiWeights = XLALComputeMultiNoiseWeights ( multiPSDs, uvar.rngMedBlock, 0 )) == NULL){
LogPrintf ( LOG_CRITICAL, "%s: XLALComputeMultiNoiseWeights() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
/* read the timestamps from the SFTs */
if ((multiTimes = XLALExtractMultiTimestampsFromSFTs ( inputSFTs )) == NULL){
LogPrintf ( LOG_CRITICAL, "%s: XLALExtractMultiTimestampsFromSFTs() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
/* read the detector information from the SFTs */
if ( XLALMultiLALDetectorFromMultiSFTs ( &multiDetectors, inputSFTs ) != XLAL_SUCCESS){
LogPrintf ( LOG_CRITICAL, "%s: XLALMultiLALDetectorFromMultiSFTs() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
/* Find the detector state for each SFT */
/* Offset by Tsft/2 to get midpoint as timestamp */
if ((multiStates = XLALGetMultiDetectorStates ( multiTimes, &multiDetectors, config.edat, 0.5 * Tsft )) == NULL){
LogPrintf ( LOG_CRITICAL, "%s: XLALGetMultiDetectorStates() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
/* Note this is specialized to a single sky position */
/* This might need to be moved into the config variables */
skyPos.system = COORDINATESYSTEM_EQUATORIAL;
skyPos.longitude = uvar.alphaRad;
skyPos.latitude = uvar.deltaRad;
/* Calculate the AM coefficients (a,b) for each SFT */
if ((multiCoeffs = XLALComputeMultiAMCoeffs ( multiStates, multiWeights, skyPos )) == NULL){
LogPrintf ( LOG_CRITICAL, "%s: XLALComputeMultiAMCoeffs() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
/* Construct the flat list of SFTs (this sort of replicates the
catalog, but there's not an obvious way to get the information
back) */
if ( ( XLALCreateSFTIndexListFromMultiSFTVect( &sftIndices, inputSFTs ) != XLAL_SUCCESS ) ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALCreateSFTIndexListFromMultiSFTVect() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
/* Construct the list of SFT pairs */
#define PCC_SFTPAIR_HEADER "# The length of SFT-pair list is %u #\n"
#define PCC_SFTPAIR_BODY "%u %u\n"
#define PCC_SFT_HEADER "# The length of SFT list is %u #\n"
#define PCC_SFT_BODY "%s %d %d\n"
FILE *fp = NULL;
if (XLALUserVarWasSet(&uvar.pairListInputFilename)) { /* If the user provided a list for reading, use it */
if((sftPairs = XLALCalloc(1, sizeof(sftPairs))) == NULL){
XLAL_ERROR(XLAL_ENOMEM);
}
if((fp = fopen(uvar.pairListInputFilename, "r")) == NULL){
LogPrintf ( LOG_CRITICAL, "didn't find SFT-pair list file with given input name\n");
XLAL_ERROR( XLAL_EFUNC );
}
if(fscanf(fp,PCC_SFTPAIR_HEADER,&sftPairs->length)==EOF){
LogPrintf ( LOG_CRITICAL, "can't read the length of SFT-pair list from the header\n");
XLAL_ERROR( XLAL_EFUNC );
}
if((sftPairs->data = XLALCalloc(sftPairs->length, sizeof(*sftPairs->data)))==NULL){
XLALFree(sftPairs);
XLAL_ERROR(XLAL_ENOMEM);
}
for(j = 0; j < sftPairs->length; j++){ /*read in the SFT-pair list */
if(fscanf(fp,PCC_SFTPAIR_BODY, &sftPairs->data[j].sftNum[0], &sftPairs->data[j].sftNum[1])==EOF){
LogPrintf ( LOG_CRITICAL, "The length of SFT-pair list doesn't match!");
XLAL_ERROR( XLAL_EFUNC );
}
}
fclose(fp);
}
else { /* if not, construct the list of pairs */
if ( ( XLALCreateSFTPairIndexList( &sftPairs, sftIndices, inputSFTs, uvar.maxLag, uvar.inclAutoCorr ) != XLAL_SUCCESS ) ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALCreateSFTPairIndexList() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
}
if (XLALUserVarWasSet(&uvar.pairListOutputFilename)) { /* Write the list of pairs to a file, if a name was provided */
if((fp = fopen(uvar.pairListOutputFilename, "w")) == NULL){
LogPrintf ( LOG_CRITICAL, "Can't write in SFT-pair list \n");
XLAL_ERROR( XLAL_EFUNC );
}
fprintf(fp,PCC_SFTPAIR_HEADER, sftPairs->length ); /*output the length of SFT-pair list to the header*/
for(j = 0; j < sftPairs->length; j++){
fprintf(fp,PCC_SFTPAIR_BODY, sftPairs->data[j].sftNum[0], sftPairs->data[j].sftNum[1]);
}
fclose(fp);
}
if (XLALUserVarWasSet(&uvar.sftListOutputFilename)) { /* Write the list of SFTs to a file for sanity-checking purposes */
if((fp = fopen(uvar.sftListOutputFilename, "w")) == NULL){
LogPrintf ( LOG_CRITICAL, "Can't write in flat SFT list \n");
XLAL_ERROR( XLAL_EFUNC );
}
fprintf(fp,PCC_SFT_HEADER, sftIndices->length ); /*output the length of SFT list to the header*/
for(j = 0; j < sftIndices->length; j++){ /*output the SFT list */
fprintf(fp,PCC_SFT_BODY, inputSFTs->data[sftIndices->data[j].detInd]->data[sftIndices->data[j].sftInd].name, inputSFTs->data[sftIndices->data[j].detInd]->data[sftIndices->data[j].sftInd].epoch.gpsSeconds, inputSFTs->data[sftIndices->data[j].detInd]->data[sftIndices->data[j].sftInd].epoch.gpsNanoSeconds);
}
fclose(fp);
}
else if(XLALUserVarWasSet(&uvar.sftListInputFilename)){ /*do a sanity check of the order of SFTs list if the name of input SFT list is given*/
UINT4 numofsft=0;
if((fp = fopen(uvar.sftListInputFilename, "r")) == NULL){
LogPrintf ( LOG_CRITICAL, "Can't read in flat SFT list \n");
XLAL_ERROR( XLAL_EFUNC );
}
if (fscanf(fp, PCC_SFT_HEADER, &numofsft)==EOF){
LogPrintf ( LOG_CRITICAL, "can't read in the length of SFT list from header\n");
XLAL_ERROR( XLAL_EFUNC );
}
CHARVectorSequence *checkDet=NULL;
if ((checkDet = XLALCreateCHARVectorSequence (numofsft, LALNameLength) ) == NULL){
LogPrintf ( LOG_CRITICAL, "%s: XLALCreateCHARVector() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
INT4 checkGPS[numofsft], checkGPSns[numofsft];
if(numofsft == sftIndices->length){
for (j=0; j<numofsft; j++){
if( fscanf(fp,PCC_SFT_BODY,&checkDet->data[j * LALNameLength], &checkGPS[j], &checkGPSns[j])==EOF){
LogPrintf ( LOG_CRITICAL, "The length of SFT list doesn't match\n");
XLAL_ERROR( XLAL_EFUNC );
}
if(strcmp( inputSFTs->data[sftIndices->data[j].detInd]->data[sftIndices->data[j].sftInd].name, &checkDet->data[j * LALNameLength] ) != 0
||inputSFTs->data[sftIndices->data[j].detInd]->data[sftIndices->data[j].sftInd].epoch.gpsSeconds != checkGPS[j]
||inputSFTs->data[sftIndices->data[j].detInd]->data[sftIndices->data[j].sftInd].epoch.gpsNanoSeconds != checkGPSns[j] ){
LogPrintf ( LOG_CRITICAL, "The order of SFTs has been changed, it's the end of civilization\n");
XLAL_ERROR( XLAL_EFUNC );
}
}
fclose(fp);
XLALDestroyCHARVectorSequence(checkDet);
}
else{
LogPrintf ( LOG_CRITICAL, "Run for your life, the length of SFT list doesn't match");
XLAL_ERROR( XLAL_EFUNC );
}
}
else
{
}
/* Get weighting factors for calculation of metric */
/* note that the sigma-squared is now absorbed into the curly G
because the AM coefficients are noise-weighted. */
REAL8Vector *GammaAve = NULL;
REAL8Vector *GammaCirc = NULL;
if ( ( XLALCalculateCrossCorrGammas( &GammaAve, &GammaCirc, sftPairs, sftIndices, multiCoeffs) != XLAL_SUCCESS ) ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALCalculateCrossCorrGammas() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
#define PCC_GAMMA_HEADER "# The normalization Sinv_Tsft is %g #\n"
#define PCC_GAMMA_BODY "%.10g\n"
if (XLALUserVarWasSet(&uvar.gammaAveOutputFilename)) { /* Write the aa+bb weight for each pair to a file, if a name was provided */
if((fp = fopen(uvar.gammaAveOutputFilename, "w")) == NULL) {
LogPrintf ( LOG_CRITICAL, "Can't write in Gamma_ave list \n");
XLAL_ERROR( XLAL_EFUNC );
}
fprintf(fp,PCC_GAMMA_HEADER, multiWeights->Sinv_Tsft); /*output the normalization factor to the header*/
for(j = 0; j < sftPairs->length; j++){
fprintf(fp,PCC_GAMMA_BODY, GammaAve->data[j]);
}
fclose(fp);
}
if (XLALUserVarWasSet(&uvar.gammaCircOutputFilename)) { /* Write the ab-ba weight for each pair to a file, if a name was provided */
if((fp = fopen(uvar.gammaCircOutputFilename, "w")) == NULL) {
LogPrintf ( LOG_CRITICAL, "Can't write in Gamma_circ list \n");
XLAL_ERROR( XLAL_EFUNC );
}
fprintf(fp,PCC_GAMMA_HEADER, multiWeights->Sinv_Tsft); /*output the normalization factor to the header*/
for(j = 0; j < sftPairs->length; j++){
fprintf(fp,PCC_GAMMA_BODY, GammaCirc->data[j]);
}
fclose(fp);
}
/*initialize binary parameters structure*/
XLAL_INIT_MEM(minBinaryTemplate);
XLAL_INIT_MEM(maxBinaryTemplate);
XLAL_INIT_MEM(thisBinaryTemplate);
XLAL_INIT_MEM(binaryTemplateSpacings);
/*fill in minbinaryOrbitParams*/
XLALGPSSetREAL8( &minBinaryTemplate.tp, uvar.orbitTimeAsc);
minBinaryTemplate.argp = 0.0;
minBinaryTemplate.asini = uvar.orbitAsiniSec;
minBinaryTemplate.ecc = 0.0;
minBinaryTemplate.period = uvar.orbitPSec;
minBinaryTemplate.fkdot[0] = uvar.fStart;
/*fill in maxBinaryParams*/
XLALGPSSetREAL8( &maxBinaryTemplate.tp, uvar.orbitTimeAsc + uvar.orbitTimeAscBand);
maxBinaryTemplate.argp = 0.0;
maxBinaryTemplate.asini = uvar.orbitAsiniSec + uvar.orbitAsiniSecBand;
maxBinaryTemplate.ecc = 0.0;
maxBinaryTemplate.period = uvar.orbitPSec;
maxBinaryTemplate.fkdot[0] = uvar.fStart + uvar.fBand;
/*fill in thisBinaryTemplate*/
XLALGPSSetREAL8( &thisBinaryTemplate.tp, uvar.orbitTimeAsc + 0.5 * uvar.orbitTimeAscBand);
thisBinaryTemplate.argp = 0.0;
thisBinaryTemplate.asini = 0.5*(minBinaryTemplate.asini + maxBinaryTemplate.asini);
thisBinaryTemplate.ecc = 0.0;
thisBinaryTemplate.period =0.5*(minBinaryTemplate.period + maxBinaryTemplate.period);
thisBinaryTemplate.fkdot[0]=0.5*(minBinaryTemplate.fkdot[0] + maxBinaryTemplate.fkdot[0]);
/*Get metric diagonal components, also estimate sensitivity i.e. E[rho]/(h0)^2 (4.13)*/
if ( (XLALCalculateLMXBCrossCorrDiagMetric(&estSens, &diagff, &diagaa, &diagTT, thisBinaryTemplate, GammaAve, sftPairs, sftIndices, inputSFTs, multiWeights /*, kappaValues*/) != XLAL_SUCCESS ) ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALCalculateLMXBCrossCorrDiagMetric() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
/* spacing in frequency from diagff */ /* set spacings in new dopplerparams struct */
if (XLALUserVarWasSet(&uvar.spacingF)) /* If spacing was given by CMD line, use it, else calculate spacing by mismatch*/
binaryTemplateSpacings.fkdot[0] = uvar.spacingF;
else
binaryTemplateSpacings.fkdot[0] = sqrt(uvar.mismatchF / diagff);
if (XLALUserVarWasSet(&uvar.spacingA))
binaryTemplateSpacings.asini = uvar.spacingA;
else
binaryTemplateSpacings.asini = sqrt(uvar.mismatchA / diagaa);
/* this is annoying: tp is a GPS time while we want a difference
in time which should be just REAL8 */
if (XLALUserVarWasSet(&uvar.spacingT))
XLALGPSSetREAL8( &binaryTemplateSpacings.tp, uvar.spacingT);
else
XLALGPSSetREAL8( &binaryTemplateSpacings.tp, sqrt(uvar.mismatchT / diagTT));
if (XLALUserVarWasSet(&uvar.spacingP))
binaryTemplateSpacings.period = uvar.spacingP;
else
binaryTemplateSpacings.period = sqrt(uvar.mismatchP / diagpp);
/* metric elements for eccentric case not considered? */
UINT8 fCount = 0, aCount = 0, tCount = 0 , pCount = 0;
const UINT8 fSpacingNum = floor( uvar.fBand / binaryTemplateSpacings.fkdot[0]);
const UINT8 aSpacingNum = floor( uvar.orbitAsiniSecBand / binaryTemplateSpacings.asini);
const UINT8 tSpacingNum = floor( uvar.orbitTimeAscBand / XLALGPSGetREAL8(&binaryTemplateSpacings.tp));
const UINT8 pSpacingNum = floor( uvar.orbitPSecBand / binaryTemplateSpacings.period);
/*reset minbinaryOrbitParams to shift the first point a factor so as to make the center of all seaching points centers at the center of searching band*/
minBinaryTemplate.fkdot[0] = uvar.fStart + 0.5 * (uvar.fBand - fSpacingNum * binaryTemplateSpacings.fkdot[0]);
minBinaryTemplate.asini = uvar.orbitAsiniSec + 0.5 * (uvar.orbitAsiniSecBand - aSpacingNum * binaryTemplateSpacings.asini);
XLALGPSSetREAL8( &minBinaryTemplate.tp, uvar.orbitTimeAsc + 0.5 * (uvar.orbitTimeAscBand - tSpacingNum * XLALGPSGetREAL8(&binaryTemplateSpacings.tp)));
minBinaryTemplate.period = uvar.orbitPSec + 0.5 * (uvar.orbitPSecBand - pSpacingNum * binaryTemplateSpacings.period);
/* initialize the doppler scan struct which stores the current template information */
XLALGPSSetREAL8(&dopplerpos.refTime, config.refTime);
dopplerpos.Alpha = uvar.alphaRad;
dopplerpos.Delta = uvar.deltaRad;
dopplerpos.fkdot[0] = minBinaryTemplate.fkdot[0];
/* set all spindowns to zero */
for (k=1; k < PULSAR_MAX_SPINS; k++)
dopplerpos.fkdot[k] = 0.0;
dopplerpos.asini = minBinaryTemplate.asini;
dopplerpos.period = minBinaryTemplate.period;
dopplerpos.tp = minBinaryTemplate.tp;
dopplerpos.ecc = minBinaryTemplate.ecc;
dopplerpos.argp = minBinaryTemplate.argp;
/* now set the initial values of binary parameters */
/* thisBinaryTemplate.asini = uvar.orbitAsiniSec;
thisBinaryTemplate.period = uvar.orbitPSec;
XLALGPSSetREAL8( &thisBinaryTemplate.tp, uvar.orbitTimeAsc);
thisBinaryTemplate.ecc = 0.0;
thisBinaryTemplate.argp = 0.0;*/
/* copy to dopplerpos */
/* Calculate SSB times (can do this once since search is currently only for one sky position, and binary doppler shift is added later) */
MultiSSBtimes *multiSSBTimes = NULL;
if ((multiSSBTimes = XLALGetMultiSSBtimes ( multiStates, skyPos, dopplerpos.refTime, SSBPREC_RELATIVISTICOPT )) == NULL){
LogPrintf ( LOG_CRITICAL, "%s: XLALGetMultiSSBtimes() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
/* "New" general metric computation */
/* For now hard-code circular parameter space */
const DopplerCoordinateSystem coordSys = {
.dim = 4,
.coordIDs = { DOPPLERCOORD_FREQ,
DOPPLERCOORD_ASINI,
DOPPLERCOORD_TASC,
DOPPLERCOORD_PORB, },
};
REAL8VectorSequence *phaseDerivs = NULL;
if ( ( XLALCalculateCrossCorrPhaseDerivatives ( &phaseDerivs, &thisBinaryTemplate, config.edat, sftIndices, multiSSBTimes, &coordSys ) != XLAL_SUCCESS ) ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALCalculateCrossCorrPhaseDerivatives() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
/* fill in metric and parameter offsets */
gsl_matrix *g_ij = NULL;
gsl_vector *eps_i = NULL;
REAL8 sumGammaSq = 0;
if ( ( XLALCalculateCrossCorrPhaseMetric ( &g_ij, &eps_i, &sumGammaSq, phaseDerivs, sftPairs, GammaAve, GammaCirc, &coordSys ) != XLAL_SUCCESS ) ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALCalculateCrossCorrPhaseMetric() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
XLALDestroyREAL8VectorSequence ( phaseDerivs );
XLALDestroyREAL8Vector ( GammaCirc );
if ((fp = fopen("gsldata.dat","w"))==NULL){
LogPrintf ( LOG_CRITICAL, "Can't write in gsl matrix file");
XLAL_ERROR( XLAL_EFUNC );
}
XLALfprintfGSLvector(fp, "%g", eps_i);
XLALfprintfGSLmatrix(fp, "%g", g_ij);
/* Allocate structure for binary doppler-shifting information */
if ((multiBinaryTimes = XLALDuplicateMultiSSBtimes ( multiSSBTimes )) == NULL){
LogPrintf ( LOG_CRITICAL, "%s: XLALDuplicateMultiSSBtimes() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
UINT8 numSFTs = sftIndices->length;
if ((shiftedFreqs = XLALCreateREAL8Vector ( numSFTs ) ) == NULL){
LogPrintf ( LOG_CRITICAL, "%s: XLALCreateREAL8Vector() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
if ((lowestBins = XLALCreateUINT4Vector ( numSFTs ) ) == NULL){
LogPrintf ( LOG_CRITICAL, "%s: XLALCreateUINT4Vector() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
if ((expSignalPhases = XLALCreateCOMPLEX8Vector ( numSFTs ) ) == NULL){
LogPrintf ( LOG_CRITICAL, "%s: XLALCreateREAL8Vector() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
if ((sincList = XLALCreateREAL8VectorSequence ( numSFTs, uvar.numBins ) ) == NULL){
LogPrintf ( LOG_CRITICAL, "%s: XLALCreateREAL8VectorSequence() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
/* args should be : spacings, min and max doppler params */
BOOLEAN firstPoint = TRUE; /* a boolean to help to search at the beginning point in parameter space, after the search it is set to be FALSE to end the loop*/
if ( (XLALAddMultiBinaryTimes( &multiBinaryTimes, multiSSBTimes, &dopplerpos ) != XLAL_SUCCESS ) ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALAddMultiBinaryTimes() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
} /*Need to apply additional doppler shifting before the loop, or the first point in parameter space will be lost and return a wrong SNR when fBand!=0*/
while ( GetNextCrossCorrTemplate(&dopplerShiftFlag, &firstPoint, &dopplerpos, &binaryTemplateSpacings, &minBinaryTemplate, &maxBinaryTemplate, &fCount, &aCount, &tCount, &pCount, fSpacingNum, aSpacingNum, tSpacingNum, pSpacingNum) == 0)
{
/* do useful stuff here*/
/* Apply additional Doppler shifting using current binary orbital parameters */
/* Might want to be clever about checking whether we've changed the orbital parameters or only the frequency */
if (dopplerShiftFlag == TRUE)
{
if ( (XLALAddMultiBinaryTimes( &multiBinaryTimes, multiSSBTimes, &dopplerpos ) != XLAL_SUCCESS ) ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALAddMultiBinaryTimes() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
}
if ( (XLALGetDopplerShiftedFrequencyInfo( shiftedFreqs, lowestBins, expSignalPhases, sincList, uvar.numBins, &dopplerpos, sftIndices, inputSFTs, multiBinaryTimes, Tsft ) != XLAL_SUCCESS ) ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALGetDopplerShiftedFrequencyInfo() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
if ( (XLALCalculatePulsarCrossCorrStatistic( &ccStat, &evSquared, GammaAve, expSignalPhases, lowestBins, sincList, sftPairs, sftIndices, inputSFTs, multiWeights, uvar.numBins) != XLAL_SUCCESS ) ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALCalculatePulsarCrossCorrStatistic() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
/* fill candidate struct and insert into toplist if necessary */
thisCandidate.freq = dopplerpos.fkdot[0];
thisCandidate.tp = XLALGPSGetREAL8( &dopplerpos.tp );
thisCandidate.argp = dopplerpos.argp;
thisCandidate.asini = dopplerpos.asini;
thisCandidate.ecc = dopplerpos.ecc;
thisCandidate.period = dopplerpos.period;
thisCandidate.rho = ccStat;
thisCandidate.evSquared = evSquared;
thisCandidate.estSens = estSens;
insert_into_crossCorrBinary_toplist(ccToplist, thisCandidate);
} /* end while loop over templates */
/* write candidates to file */
sort_crossCorrBinary_toplist( ccToplist );
/* add error checking */
final_write_crossCorrBinary_toplist_to_file( ccToplist, uvar.toplistFilename, &checksum);
REAL8 h0Sens = sqrt((10 / sqrt(estSens))); /*for a SNR=10 signal, the h0 we can detect*/
XLALGPSTimeNow (&computingEndGPSTime); /*record the rough end time*/
UINT4 computingTime = computingEndGPSTime.gpsSeconds - computingStartGPSTime.gpsSeconds;
/* make a meta-data file*/
if(XLALUserVarWasSet(&uvar.logFilename)){
CHAR *CMDInputStr = XLALUserVarGetLog ( UVAR_LOGFMT_CFGFILE );
if ((fp = fopen(uvar.logFilename,"w"))==NULL){
LogPrintf ( LOG_CRITICAL, "Can't write in logfile");
XLAL_ERROR( XLAL_EFUNC );
}
fprintf(fp, "[UserInput]\n\n");
fprintf(fp, "%s\n", CMDInputStr);
fprintf(fp, "[CalculatedValues]\n\n");
fprintf(fp, "g_ff = %.9f\n", diagff );
fprintf(fp, "g_aa = %.9f\n", diagaa );
fprintf(fp, "g_TT = %.9f\n", diagTT );
fprintf(fp, "FSpacing = %.9g\n", binaryTemplateSpacings.fkdot[0]);
fprintf(fp, "ASpacing = %.9g\n", binaryTemplateSpacings.asini);
fprintf(fp, "TSpacing = %.9g\n", XLALGPSGetREAL8(&binaryTemplateSpacings.tp));
/* fprintf(fp, "PSpacing = %.9g\n", binaryTemplateSpacings.period );*/
fprintf(fp, "TemplatenumF = %" LAL_UINT8_FORMAT "\n", (fSpacingNum + 1));
fprintf(fp, "TemplatenumA = %" LAL_UINT8_FORMAT "\n", (aSpacingNum + 1));
fprintf(fp, "TemplatenumT = %" LAL_UINT8_FORMAT "\n", (tSpacingNum + 1));
fprintf(fp, "TemplatenumP = %" LAL_UINT8_FORMAT "\n", (pSpacingNum + 1));
fprintf(fp, "TemplatenumTotal = %" LAL_UINT8_FORMAT "\n",(fSpacingNum + 1) * (aSpacingNum + 1) * (tSpacingNum + 1) * (pSpacingNum + 1));
fprintf(fp, "Sens = %.9g\n", estSens);/*(E[rho]/h0^2)^2*/
fprintf(fp, "h0_min_SNR10 = %.9g\n", h0Sens);/*for rho = 10 in our pipeline*/
fprintf(fp, "startTime = %" LAL_INT4_FORMAT "\n", computingStartGPSTime.gpsSeconds );/*start time in GPS-time*/
fprintf(fp, "endTime = %" LAL_INT4_FORMAT "\n", computingEndGPSTime.gpsSeconds );/*end time in GPS-time*/
fprintf(fp, "computingTime = %" LAL_UINT4_FORMAT "\n", computingTime );/*total time in sec*/
fprintf(fp, "SFTnum = %" LAL_UINT4_FORMAT "\n", sftIndices->length);/*total number of SFT*/
fprintf(fp, "pairnum = %" LAL_UINT4_FORMAT "\n", sftPairs->length);/*total number of pair of SFT*/
fprintf(fp, "Tsft = %.6g\n", Tsft);/*SFT duration*/
fprintf(fp, "\n[Version]\n\n");
fprintf(fp, "%s", VCSInfoString);
fclose(fp);
XLALFree(CMDInputStr);
}
XLALFree(VCSInfoString);
XLALDestroyCOMPLEX8Vector ( expSignalPhases );
XLALDestroyUINT4Vector ( lowestBins );
XLALDestroyREAL8Vector ( shiftedFreqs );
XLALDestroyREAL8VectorSequence ( sincList );
XLALDestroyMultiSSBtimes ( multiBinaryTimes );
XLALDestroyMultiSSBtimes ( multiSSBTimes );
XLALDestroyREAL8Vector ( GammaAve );
XLALDestroySFTPairIndexList( sftPairs );
XLALDestroySFTIndexList( sftIndices );
XLALDestroyMultiAMCoeffs ( multiCoeffs );
XLALDestroyMultiDetectorStateSeries ( multiStates );
XLALDestroyMultiTimestamps ( multiTimes );
XLALDestroyMultiNoiseWeights ( multiWeights );
XLALDestroyMultiPSDVector ( multiPSDs );
XLALDestroyMultiSFTVector ( inputSFTs );
/* de-allocate memory for configuration variables */
XLALDestroyConfigVars ( &config );
/* de-allocate memory for user input variables */
XLALDestroyUserVars();
/* free toplist memory */
free_crossCorr_toplist(&ccToplist);
/* check memory leaks if we forgot to de-allocate anything */
LALCheckMemoryLeaks();
LogPrintf (LOG_CRITICAL, "End time\n");/*for debug convenience to record calculating time*/
return 0;
} /* main */
/* initialize and register user variables */
int XLALInitUserVars (UserInput_t *uvar)
{
/* initialize with some defaults */
uvar->help = FALSE;
uvar->maxLag = 0.0;
uvar->inclAutoCorr = FALSE;
uvar->fStart = 100.0;
uvar->fBand = 0.1;
/* uvar->fdotStart = 0.0; */
/* uvar->fdotBand = 0.0; */
uvar->alphaRad = 0.0;
uvar->deltaRad = 0.0;
uvar->refTime = 0.0;
uvar->rngMedBlock = 50;
uvar->numBins = 1;
/* zero binary orbital parameters means not a binary */
uvar->orbitAsiniSec = 0.0;
uvar->orbitAsiniSecBand = 0.0;
uvar->orbitPSec = 0.0;
uvar->orbitPSecBand = 0.0;
uvar->orbitTimeAsc = 0;
uvar->orbitTimeAscBand = 0;
/*default mismatch values */
/* set to 0.1 by default -- for no real reason */
/* make 0.1 a macro? */
uvar->mismatchF = 0.1;
uvar->mismatchA = 0.1;
uvar->mismatchT = 0.1;
uvar->mismatchP = 0.1;
uvar->ephemEarth = XLALStringDuplicate("earth00-19-DE405.dat.gz");
uvar->ephemSun = XLALStringDuplicate("sun00-19-DE405.dat.gz");
uvar->sftLocation = XLALCalloc(1, MAXFILENAMELENGTH+1);
/* initialize number of candidates in toplist -- default is just to return the single best candidate */
uvar->numCand = 1;
uvar->toplistFilename = XLALStringDuplicate("toplist_crosscorr.dat");
uvar->version = FALSE;
/* register user-variables */
XLALregBOOLUserStruct ( help, 'h', UVAR_HELP, "Print this message");
XLALregINTUserStruct ( startTime, 0, UVAR_REQUIRED, "Desired start time of analysis in GPS seconds");
XLALregINTUserStruct ( endTime, 0, UVAR_REQUIRED, "Desired end time of analysis in GPS seconds");
XLALregREALUserStruct ( maxLag, 0, UVAR_OPTIONAL, "Maximum lag time in seconds between SFTs in correlation");
XLALregBOOLUserStruct ( inclAutoCorr, 0, UVAR_OPTIONAL, "Include auto-correlation terms (an SFT with itself)");
XLALregREALUserStruct ( fStart, 0, UVAR_OPTIONAL, "Start frequency in Hz");
XLALregREALUserStruct ( fBand, 0, UVAR_OPTIONAL, "Frequency band to search over in Hz ");
/* XLALregREALUserStruct ( fdotStart, 0, UVAR_OPTIONAL, "Start value of spindown in Hz/s"); */
/* XLALregREALUserStruct ( fdotBand, 0, UVAR_OPTIONAL, "Band for spindown values in Hz/s"); */
XLALregREALUserStruct ( alphaRad, 0, UVAR_OPTIONAL, "Right ascension for directed search (radians)");
XLALregREALUserStruct ( deltaRad, 0, UVAR_OPTIONAL, "Declination for directed search (radians)");
XLALregREALUserStruct ( refTime, 0, UVAR_OPTIONAL, "SSB reference time for pulsar-parameters [Default: midPoint]");
XLALregREALUserStruct ( orbitAsiniSec, 0, UVAR_OPTIONAL, "Start of search band for projected semimajor axis (seconds) [0 means not a binary]");
XLALregREALUserStruct ( orbitAsiniSecBand, 0, UVAR_OPTIONAL, "Width of search band for projected semimajor axis (seconds)");
XLALregREALUserStruct ( orbitPSec, 0, UVAR_OPTIONAL, "Binary orbital period (seconds) [0 means not a binary]");
XLALregREALUserStruct ( orbitPSecBand, 0, UVAR_OPTIONAL, "Band for binary orbital period (seconds) ");
XLALregREALUserStruct ( orbitTimeAsc, 0, UVAR_OPTIONAL, "Start of orbital time-of-ascension band in GPS seconds");
XLALregREALUserStruct ( orbitTimeAscBand, 0, UVAR_OPTIONAL, "Width of orbital time-of-ascension band (seconds)");
XLALregSTRINGUserStruct( ephemEarth, 0, UVAR_OPTIONAL, "Earth ephemeris file to use");
XLALregSTRINGUserStruct( ephemSun, 0, UVAR_OPTIONAL, "Sun ephemeris file to use");
XLALregSTRINGUserStruct( sftLocation, 0, UVAR_REQUIRED, "Filename pattern for locating SFT data");
XLALregINTUserStruct ( rngMedBlock, 0, UVAR_OPTIONAL, "Running median block size for PSD estimation");
XLALregINTUserStruct ( numBins, 0, UVAR_OPTIONAL, "Number of frequency bins to include in calculation");
XLALregREALUserStruct ( mismatchF, 0, UVAR_OPTIONAL, "Desired mismatch for frequency spacing");
XLALregREALUserStruct ( mismatchA, 0, UVAR_OPTIONAL, "Desired mismatch for asini spacing");
XLALregREALUserStruct ( mismatchT, 0, UVAR_OPTIONAL, "Desired mismatch for periapse passage time spacing");
XLALregREALUserStruct ( mismatchP, 0, UVAR_OPTIONAL, "Desired mismatch for period spacing");
XLALregREALUserStruct ( spacingF, 0, UVAR_OPTIONAL, "Desired frequency spacing");
XLALregREALUserStruct ( spacingA, 0, UVAR_OPTIONAL, "Desired asini spacing");
XLALregREALUserStruct ( spacingT, 0, UVAR_OPTIONAL, "Desired periapse passage time spacing");
XLALregREALUserStruct ( spacingP, 0, UVAR_OPTIONAL, "Desired period spacing");
XLALregINTUserStruct ( numCand, 0, UVAR_OPTIONAL, "Number of candidates to keep in toplist");
XLALregSTRINGUserStruct( pairListInputFilename, 0, UVAR_OPTIONAL, "Name of file from which to read list of SFT pairs");
XLALregSTRINGUserStruct( pairListOutputFilename, 0, UVAR_OPTIONAL, "Name of file to which to write list of SFT pairs");
XLALregSTRINGUserStruct( sftListOutputFilename, 0, UVAR_OPTIONAL, "Name of file to which to write list of SFTs (for sanity checks)");
XLALregSTRINGUserStruct( sftListInputFilename, 0, UVAR_OPTIONAL, "Name of file to which to read in list of SFTs (for sanity checks)");
XLALregSTRINGUserStruct( gammaAveOutputFilename, 0, UVAR_OPTIONAL, "Name of file to which to write aa+bb weights (for e.g., false alarm estimation)");
XLALregSTRINGUserStruct( gammaCircOutputFilename, 0, UVAR_OPTIONAL, "Name of file to which to write ab-ba weights (for e.g., systematic error)");
XLALregSTRINGUserStruct( toplistFilename, 0, UVAR_OPTIONAL, "Output filename containing candidates in toplist");
XLALregSTRINGUserStruct( logFilename, 0, UVAR_OPTIONAL, "Output a meta-data file for the search");
XLALregBOOLUserStruct ( version, 'V', UVAR_SPECIAL, "Output version(VCS) information");
if ( xlalErrno ) {
XLALPrintError ("%s: user variable initialization failed with errno = %d.\n", __func__, xlalErrno );
XLAL_ERROR ( XLAL_EFUNC );
}
return XLAL_SUCCESS;
}
