Exemple #1
0
/* Do structure specific swaps if Eeprom format is non native to host */
static void
eepromSwap(struct ar5416eeprom *ee)
{
	uint32_t integer, i, j;
	uint16_t word;
	MODAL_EEP_HEADER *pModal;

	/* convert Base Eep header */
	word = __bswap16(ee->baseEepHeader.length);
	ee->baseEepHeader.length = word;

	word = __bswap16(ee->baseEepHeader.checksum);
	ee->baseEepHeader.checksum = word;

	word = __bswap16(ee->baseEepHeader.version);
	ee->baseEepHeader.version = word;

	word = __bswap16(ee->baseEepHeader.regDmn[0]);
	ee->baseEepHeader.regDmn[0] = word;

	word = __bswap16(ee->baseEepHeader.regDmn[1]);
	ee->baseEepHeader.regDmn[1] = word;

	word = __bswap16(ee->baseEepHeader.rfSilent);
	ee->baseEepHeader.rfSilent = word;

	word = __bswap16(ee->baseEepHeader.blueToothOptions);
	ee->baseEepHeader.blueToothOptions = word; 

	word = __bswap16(ee->baseEepHeader.deviceCap);
	ee->baseEepHeader.deviceCap = word;

	/* convert Modal Eep header */
	for (j = 0; j < 2; j++) {
		pModal = &ee->modalHeader[j];

		/* XXX linux/ah_osdep.h only defines __bswap32 for BE */
		integer = __bswap32(pModal->antCtrlCommon);
		pModal->antCtrlCommon = integer;

		for (i = 0; i < AR5416_MAX_CHAINS; i++) {
			integer = __bswap32(pModal->antCtrlChain[i]);
			pModal->antCtrlChain[i] = integer;
		}

		for (i = 0; i < AR5416_EEPROM_MODAL_SPURS; i++) {
			word = __bswap16(pModal->spurChans[i].spurChan);
			pModal->spurChans[i].spurChan = word;
		}
	}
}
HAL_STATUS
ath_hal_v4kEepromAttach(struct ath_hal *ah)
{
#define	NW(a)	(sizeof(a) / sizeof(uint16_t))
    HAL_EEPROM_v4k *ee = AH_PRIVATE(ah)->ah_eeprom;
    uint16_t *eep_data, magic;
    HAL_BOOL need_swap;
    u_int w, off, len;
    uint32_t sum;

    HALASSERT(ee == AH_NULL);
    /*
     * Don't check magic if we're supplied with an EEPROM block,
     * typically this is from Howl but it may also be from later
     * boards w/ an embedded WMAC.
     */
    if (ah->ah_eepromdata == NULL) {
        if (!ath_hal_eepromRead(ah, AR5416_EEPROM_MAGIC_OFFSET, &magic)) {
            HALDEBUG(ah, HAL_DEBUG_ANY,
                     "%s Error reading Eeprom MAGIC\n", __func__);
            return HAL_EEREAD;
        }
    }
    HALDEBUG(ah, HAL_DEBUG_ATTACH, "%s Eeprom Magic = 0x%x\n",
             __func__, magic);
    if (magic != AR5416_EEPROM_MAGIC) {
        HALDEBUG(ah, HAL_DEBUG_ANY, "Bad magic number\n");
        return HAL_EEMAGIC;
    }

    ee = ath_hal_malloc(sizeof(HAL_EEPROM_v4k));
    if (ee == AH_NULL) {
        /* XXX message */
        return HAL_ENOMEM;
    }

    eep_data = (uint16_t *)&ee->ee_base;
    for (w = 0; w < NW(struct ar5416eeprom_4k); w++) {
        off = owl_eep_start_loc + w;	/* NB: AP71 starts at 0 */
        if (!ath_hal_eepromRead(ah, off, &eep_data[w])) {
            HALDEBUG(ah, HAL_DEBUG_ANY,
                     "%s eeprom read error at offset 0x%x\n",
                     __func__, off);
            return HAL_EEREAD;
        }
    }
    /* Convert to eeprom native eeprom endian format */
    /*
     * XXX this is likely incorrect but will do for now
     * XXX to get embedded boards working.
     */
    if (ah->ah_eepromdata == NULL && isBigEndian()) {
        for (w = 0; w < NW(struct ar5416eeprom_4k); w++)
            eep_data[w] = __bswap16(eep_data[w]);
    }

    /*
     * At this point, we're in the native eeprom endian format
     * Now, determine the eeprom endian by looking at byte 26??
     */
    need_swap = ((ee->ee_base.baseEepHeader.eepMisc & AR5416_EEPMISC_BIG_ENDIAN) != 0) ^ isBigEndian();
    if (need_swap) {
        HALDEBUG(ah, HAL_DEBUG_ATTACH | HAL_DEBUG_EEPROM,
                 "Byte swap EEPROM contents.\n");
        len = __bswap16(ee->ee_base.baseEepHeader.length);
    } else {
        len = ee->ee_base.baseEepHeader.length;
    }
    len = AH_MIN(len, sizeof(struct ar5416eeprom_4k)) / sizeof(uint16_t);

    /* Apply the checksum, done in native eeprom format */
    /* XXX - Need to check to make sure checksum calculation is done
     * in the correct endian format.  Right now, it seems it would
     * cast the raw data to host format and do the calculation, which may
     * not be correct as the calculation may need to be done in the native
     * eeprom format
     */
    sum = 0;
    for (w = 0; w < len; w++) {
        sum ^= eep_data[w];
    }
    /* Check CRC - Attach should fail on a bad checksum */
    if (sum != 0xffff) {
        HALDEBUG(ah, HAL_DEBUG_ANY,
                 "Bad EEPROM checksum 0x%x (Len=%u)\n", sum, len);
        return HAL_EEBADSUM;
    }

    if (need_swap)
        eepromSwap(&ee->ee_base);	/* byte swap multi-byte data */

    /* swap words 0+2 so version is at the front */
    magic = eep_data[0];
    eep_data[0] = eep_data[2];
    eep_data[2] = magic;

    HALDEBUG(ah, HAL_DEBUG_ATTACH | HAL_DEBUG_EEPROM,
             "%s Eeprom Version %u.%u\n", __func__,
             owl_get_eep_ver(ee), owl_get_eep_rev(ee));

    /* NB: must be after all byte swapping */
    if (owl_get_eep_ver(ee) != AR5416_EEP_VER) {
        HALDEBUG(ah, HAL_DEBUG_ANY,
                 "Bad EEPROM version 0x%x\n", owl_get_eep_ver(ee));
        return HAL_EEBADSUM;
    }

    v4kEepromReadCTLInfo(ah, ee);		/* Get CTLs */

    AH_PRIVATE(ah)->ah_eeprom = ee;
    AH_PRIVATE(ah)->ah_eeversion = ee->ee_base.baseEepHeader.version;
    AH_PRIVATE(ah)->ah_eepromDetach = v4kEepromDetach;
    AH_PRIVATE(ah)->ah_eepromGet = v4kEepromGet;
    AH_PRIVATE(ah)->ah_eepromSet = v4kEepromSet;
    AH_PRIVATE(ah)->ah_getSpurChan = v4kEepromGetSpurChan;
    AH_PRIVATE(ah)->ah_eepromDiag = v4kEepromDiag;
    return HAL_OK;
#undef NW
}
Exemple #3
0
u_int16_t get_ctrl_msg_seq_no(aow_ctrl_msg_t* m)
{
    u_int16_t seq_no = __bswap16(m->h.seq_no);
    return seq_no;
}
Exemple #4
0
u_int16_t get_ctrl_msg_cmd_type(aow_ctrl_msg_t* m)
{
    u_int16_t cmd  = (u_int16_t)__bswap16(m->h.desc) & (~AOW_CM_LOCAL_COMMAND_FLAG);
    return cmd;
}    
Exemple #5
0
u_int16_t get_ctrl_msg_cmd_desc(aow_ctrl_msg_t *m)
{
    u_int16_t desc = (u_int16_t)__bswap16(m->h.desc);
    return desc;
}