/*
* __wt_txn_recover --
* Run recovery.
*/
int
__wt_txn_recover(WT_SESSION_IMPL *session)
{
WT_CONNECTION_IMPL *conn;
WT_CURSOR *metac;
WT_DECL_RET;
WT_RECOVERY r;
struct WT_RECOVERY_FILE *metafile;
char *config;
bool eviction_started, needs_rec, was_backup;
conn = S2C(session);
WT_CLEAR(r);
WT_INIT_LSN(&r.ckpt_lsn);
eviction_started = false;
was_backup = F_ISSET(conn, WT_CONN_WAS_BACKUP);
/* We need a real session for recovery. */
WT_RET(__wt_open_internal_session(conn, "txn-recover",
false, WT_SESSION_NO_LOGGING, &session));
r.session = session;
F_SET(conn, WT_CONN_RECOVERING);
WT_ERR(__wt_metadata_search(session, WT_METAFILE_URI, &config));
WT_ERR(__recovery_setup_file(&r, WT_METAFILE_URI, config));
WT_ERR(__wt_metadata_cursor_open(session, NULL, &metac));
metafile = &r.files[WT_METAFILE_ID];
metafile->c = metac;
/*
* If no log was found (including if logging is disabled), or if the
* last checkpoint was done with logging disabled, recovery should not
* run. Scan the metadata to figure out the largest file ID.
*/
if (!FLD_ISSET(S2C(session)->log_flags, WT_CONN_LOG_EXISTED) ||
WT_IS_MAX_LSN(&metafile->ckpt_lsn)) {
WT_ERR(__recovery_file_scan(&r));
conn->next_file_id = r.max_fileid;
goto done;
}
/*
* First, do a pass through the log to recover the metadata, and
* establish the last checkpoint LSN. Skip this when opening a hot
* backup: we already have the correct metadata in that case.
*/
if (!was_backup) {
r.metadata_only = true;
/*
* If this is a read-only connection, check if the checkpoint
* LSN in the metadata file is up to date, indicating a clean
* shutdown.
*/
if (F_ISSET(conn, WT_CONN_READONLY)) {
WT_ERR(__wt_log_needs_recovery(
session, &metafile->ckpt_lsn, &needs_rec));
if (needs_rec)
WT_ERR_MSG(session, WT_RUN_RECOVERY,
"Read-only database needs recovery");
}
if (WT_IS_INIT_LSN(&metafile->ckpt_lsn))
WT_ERR(__wt_log_scan(session,
NULL, WT_LOGSCAN_FIRST, __txn_log_recover, &r));
else {
/*
* Start at the last checkpoint LSN referenced in the
* metadata. If we see the end of a checkpoint while
* scanning, we will change the full scan to start from
* there.
*/
r.ckpt_lsn = metafile->ckpt_lsn;
ret = __wt_log_scan(session,
&metafile->ckpt_lsn, 0, __txn_log_recover, &r);
if (ret == ENOENT)
ret = 0;
WT_ERR(ret);
}
}
/* Scan the metadata to find the live files and their IDs. */
WT_ERR(__recovery_file_scan(&r));
/*
* We no longer need the metadata cursor: close it to avoid pinning any
* resources that could block eviction during recovery.
*/
r.files[0].c = NULL;
WT_ERR(metac->close(metac));
/*
* Now, recover all the files apart from the metadata.
* Pass WT_LOGSCAN_RECOVER so that old logs get truncated.
*/
r.metadata_only = false;
WT_ERR(__wt_verbose(session, WT_VERB_RECOVERY,
"Main recovery loop: starting at %" PRIu32 "/%" PRIu32,
r.ckpt_lsn.l.file, r.ckpt_lsn.l.offset));
WT_ERR(__wt_log_needs_recovery(session, &r.ckpt_lsn, &needs_rec));
/*
* Check if the database was shut down cleanly. If not
* return an error if the user does not want automatic
* recovery.
*/
if (needs_rec &&
(FLD_ISSET(conn->log_flags, WT_CONN_LOG_RECOVER_ERR) ||
F_ISSET(conn, WT_CONN_READONLY))) {
if (F_ISSET(conn, WT_CONN_READONLY))
WT_ERR_MSG(session, WT_RUN_RECOVERY,
"Read-only database needs recovery");
WT_ERR(WT_RUN_RECOVERY);
}
if (F_ISSET(conn, WT_CONN_READONLY))
goto done;
/*
* Recovery can touch more data than fits in cache, so it relies on
* regular eviction to manage paging. Start eviction threads for
* recovery without LAS cursors.
*/
WT_ERR(__wt_evict_create(session));
eviction_started = true;
/*
* Always run recovery even if it was a clean shutdown only if
* this is not a read-only connection.
* We can consider skipping it in the future.
*/
if (WT_IS_INIT_LSN(&r.ckpt_lsn))
WT_ERR(__wt_log_scan(session, NULL,
WT_LOGSCAN_FIRST | WT_LOGSCAN_RECOVER,
__txn_log_recover, &r));
else {
ret = __wt_log_scan(session, &r.ckpt_lsn,
WT_LOGSCAN_RECOVER, __txn_log_recover, &r);
if (ret == ENOENT)
ret = 0;
WT_ERR(ret);
}
conn->next_file_id = r.max_fileid;
/*
* If recovery ran successfully forcibly log a checkpoint so the next
* open is fast and keep the metadata up to date with the checkpoint
* LSN and archiving.
*/
WT_ERR(session->iface.checkpoint(&session->iface, "force=1"));
done: FLD_SET(conn->log_flags, WT_CONN_LOG_RECOVER_DONE);
err: WT_TRET(__recovery_free(&r));
__wt_free(session, config);
if (ret != 0)
__wt_err(session, ret, "Recovery failed");
/*
* Destroy the eviction threads that were started in support of
* recovery. They will be restarted once the lookaside table is
* created.
*/
if (eviction_started)
WT_TRET(__wt_evict_destroy(session));
WT_TRET(session->iface.close(&session->iface, NULL));
F_CLR(conn, WT_CONN_RECOVERING);
return (ret);
}
/*
* __wt_txn_recover --
* Run recovery.
*/
int
__wt_txn_recover(WT_CONNECTION_IMPL *conn)
{
WT_CURSOR *metac;
WT_DECL_RET;
WT_RECOVERY r;
WT_SESSION_IMPL *session;
struct WT_RECOVERY_FILE *metafile;
char *config;
int was_backup;
WT_CLEAR(r);
INIT_LSN(&r.ckpt_lsn);
was_backup = F_ISSET(conn, WT_CONN_WAS_BACKUP) ? 1 : 0;
/* We need a real session for recovery. */
WT_RET(__wt_open_session(conn, NULL, NULL, &session));
F_SET(session, WT_SESSION_NO_LOGGING);
r.session = session;
WT_ERR(__wt_metadata_search(session, WT_METAFILE_URI, &config));
WT_ERR(__recovery_setup_file(&r, WT_METAFILE_URI, config));
WT_ERR(__wt_metadata_cursor(session, NULL, &metac));
metafile = &r.files[WT_METAFILE_ID];
metafile->c = metac;
/*
* First, do a pass through the log to recover the metadata, and
* establish the last checkpoint LSN. Skip this when opening a hot
* backup: we already have the correct metadata in that case.
*/
if (!was_backup) {
r.metadata_only = 1;
if (IS_INIT_LSN(&metafile->ckpt_lsn))
WT_ERR(__wt_log_scan(session,
NULL, WT_LOGSCAN_FIRST, __txn_log_recover, &r));
else
WT_ERR(__wt_log_scan(session,
&metafile->ckpt_lsn, 0, __txn_log_recover, &r));
WT_ASSERT(session,
LOG_CMP(&r.ckpt_lsn, &conn->log->first_lsn) >= 0);
}
/* Scan the metadata to find the live files and their IDs. */
WT_ERR(__recovery_file_scan(&r));
/*
* We no longer need the metadata cursor: close it to avoid pinning any
* resources that could block eviction during recovery.
*/
r.files[0].c = NULL;
WT_ERR(metac->close(metac));
/*
* Now, recover all the files apart from the metadata.
* Pass WT_LOGSCAN_RECOVER so that old logs get truncated.
*/
r.metadata_only = 0;
WT_ERR(__wt_verbose(session, WT_VERB_RECOVERY,
"Main recovery loop: starting at %u/%" PRIuMAX,
r.ckpt_lsn.file, (uintmax_t)r.ckpt_lsn.offset));
if (IS_INIT_LSN(&r.ckpt_lsn))
WT_ERR(__wt_log_scan(session, NULL,
WT_LOGSCAN_FIRST | WT_LOGSCAN_RECOVER,
__txn_log_recover, &r));
else
WT_ERR(__wt_log_scan(session, &r.ckpt_lsn,
WT_LOGSCAN_RECOVER,
__txn_log_recover, &r));
conn->next_file_id = r.max_fileid;
/*
* If recovery ran successfully forcibly log a checkpoint so the next
* open is fast and keep the metadata up to date with the checkpoint
* LSN and archiving.
*/
WT_ERR(session->iface.checkpoint(&session->iface, "force=1"));
err: WT_TRET(__recovery_free(&r));
__wt_free(session, config);
WT_TRET(session->iface.close(&session->iface, NULL));
return (ret);
}
/*
* __wt_txn_recover --
* Run recovery.
*/
int
__wt_txn_recover(WT_SESSION_IMPL *session)
{
WT_CONNECTION_IMPL *conn;
WT_CURSOR *metac;
WT_DECL_RET;
WT_RECOVERY r;
struct WT_RECOVERY_FILE *metafile;
char *config;
int was_backup;
conn = S2C(session);
WT_CLEAR(r);
WT_INIT_LSN(&r.ckpt_lsn);
was_backup = F_ISSET(conn, WT_CONN_WAS_BACKUP) ? 1 : 0;
/* We need a real session for recovery. */
WT_RET(__wt_open_session(conn, NULL, NULL, &session));
F_SET(session, WT_SESSION_NO_LOGGING);
r.session = session;
WT_ERR(__wt_metadata_search(session, WT_METAFILE_URI, &config));
WT_ERR(__recovery_setup_file(&r, WT_METAFILE_URI, config));
WT_ERR(__wt_metadata_cursor(session, NULL, &metac));
metafile = &r.files[WT_METAFILE_ID];
metafile->c = metac;
/*
* If no log was found (including if logging is disabled), or if the
* last checkpoint was done with logging disabled, recovery should not
* run. Scan the metadata to figure out the largest file ID.
*/
if (!FLD_ISSET(S2C(session)->log_flags, WT_CONN_LOG_EXISTED) ||
WT_IS_MAX_LSN(&metafile->ckpt_lsn)) {
WT_ERR(__recovery_file_scan(&r));
conn->next_file_id = r.max_fileid;
goto done;
}
/*
* First, do a pass through the log to recover the metadata, and
* establish the last checkpoint LSN. Skip this when opening a hot
* backup: we already have the correct metadata in that case.
*/
if (!was_backup) {
r.metadata_only = 1;
if (WT_IS_INIT_LSN(&metafile->ckpt_lsn))
WT_ERR(__wt_log_scan(session,
NULL, WT_LOGSCAN_FIRST, __txn_log_recover, &r));
else {
/*
* Start at the last checkpoint LSN referenced in the
* metadata. If we see the end of a checkpoint while
* scanning, we will change the full scan to start from
* there.
*/
r.ckpt_lsn = metafile->ckpt_lsn;
WT_ERR(__wt_log_scan(session,
&metafile->ckpt_lsn, 0, __txn_log_recover, &r));
}
}
/* Scan the metadata to find the live files and their IDs. */
WT_ERR(__recovery_file_scan(&r));
/*
* We no longer need the metadata cursor: close it to avoid pinning any
* resources that could block eviction during recovery.
*/
r.files[0].c = NULL;
WT_ERR(metac->close(metac));
/*
* Now, recover all the files apart from the metadata.
* Pass WT_LOGSCAN_RECOVER so that old logs get truncated.
*/
r.metadata_only = 0;
WT_ERR(__wt_verbose(session, WT_VERB_RECOVERY,
"Main recovery loop: starting at %u/%" PRIuMAX,
r.ckpt_lsn.file, (uintmax_t)r.ckpt_lsn.offset));
if (WT_IS_INIT_LSN(&r.ckpt_lsn))
WT_ERR(__wt_log_scan(session, NULL,
WT_LOGSCAN_FIRST | WT_LOGSCAN_RECOVER,
__txn_log_recover, &r));
else
WT_ERR(__wt_log_scan(session, &r.ckpt_lsn,
WT_LOGSCAN_RECOVER,
__txn_log_recover, &r));
conn->next_file_id = r.max_fileid;
/*
* If recovery ran successfully forcibly log a checkpoint so the next
* open is fast and keep the metadata up to date with the checkpoint
* LSN and archiving.
*/
WT_ERR(session->iface.checkpoint(&session->iface, "force=1"));
done:
err: WT_TRET(__recovery_free(&r));
__wt_free(session, config);
WT_TRET(session->iface.close(&session->iface, NULL));
return (ret);
}
/*
* __wt_txn_recover --
* Run recovery.
*/
int
__wt_txn_recover(WT_SESSION_IMPL *session)
{
WT_CONNECTION_IMPL *conn;
WT_CURSOR *metac;
WT_DECL_RET;
WT_RECOVERY r;
WT_RECOVERY_FILE *metafile;
char *config;
bool do_checkpoint, eviction_started, needs_rec, was_backup;
conn = S2C(session);
WT_CLEAR(r);
WT_INIT_LSN(&r.ckpt_lsn);
config = NULL;
do_checkpoint = true;
eviction_started = false;
was_backup = F_ISSET(conn, WT_CONN_WAS_BACKUP);
/* We need a real session for recovery. */
WT_RET(__wt_open_internal_session(conn, "txn-recover",
false, WT_SESSION_NO_LOGGING, &session));
r.session = session;
WT_MAX_LSN(&r.max_ckpt_lsn);
WT_MAX_LSN(&r.max_rec_lsn);
conn->txn_global.recovery_timestamp =
conn->txn_global.meta_ckpt_timestamp = 0;
F_SET(conn, WT_CONN_RECOVERING);
WT_ERR(__wt_metadata_search(session, WT_METAFILE_URI, &config));
WT_ERR(__recovery_setup_file(&r, WT_METAFILE_URI, config));
WT_ERR(__wt_metadata_cursor_open(session, NULL, &metac));
metafile = &r.files[WT_METAFILE_ID];
metafile->c = metac;
/*
* If no log was found (including if logging is disabled), or if the
* last checkpoint was done with logging disabled, recovery should not
* run. Scan the metadata to figure out the largest file ID.
*/
if (!FLD_ISSET(conn->log_flags, WT_CONN_LOG_EXISTED) ||
WT_IS_MAX_LSN(&metafile->ckpt_lsn)) {
/*
* Detect if we're going from logging disabled to enabled.
* We need to know this to verify LSNs and start at the correct
* log file later. If someone ran with logging, then disabled
* it and removed all the log files and then turned logging back
* on, we have to start logging in the log file number that is
* larger than any checkpoint LSN we have from the earlier time.
*/
WT_ERR(__recovery_file_scan(&r));
/*
* The array can be re-allocated in recovery_file_scan. Reset
* our pointer after scanning all the files.
*/
metafile = &r.files[WT_METAFILE_ID];
conn->next_file_id = r.max_fileid;
if (FLD_ISSET(conn->log_flags, WT_CONN_LOG_ENABLED) &&
WT_IS_MAX_LSN(&metafile->ckpt_lsn) &&
!WT_IS_MAX_LSN(&r.max_ckpt_lsn))
WT_ERR(__wt_log_reset(session, r.max_ckpt_lsn.l.file));
else
do_checkpoint = false;
goto done;
}
/*
* First, do a pass through the log to recover the metadata, and
* establish the last checkpoint LSN. Skip this when opening a hot
* backup: we already have the correct metadata in that case.
*
* If we're running with salvage and we hit an error, we ignore it
* and continue. In salvage we want to recover whatever part of the
* data we can from the last checkpoint up until whatever problem we
* detect in the log file. In salvage, we ignore errors from scanning
* the log so recovery can continue. Other errors remain errors.
*/
if (!was_backup) {
r.metadata_only = true;
/*
* If this is a read-only connection, check if the checkpoint
* LSN in the metadata file is up to date, indicating a clean
* shutdown.
*/
if (F_ISSET(conn, WT_CONN_READONLY)) {
WT_ERR(__wt_log_needs_recovery(
session, &metafile->ckpt_lsn, &needs_rec));
if (needs_rec)
WT_ERR_MSG(session, WT_RUN_RECOVERY,
"Read-only database needs recovery");
}
if (WT_IS_INIT_LSN(&metafile->ckpt_lsn))
ret = __wt_log_scan(session,
NULL, WT_LOGSCAN_FIRST, __txn_log_recover, &r);
else {
/*
* Start at the last checkpoint LSN referenced in the
* metadata. If we see the end of a checkpoint while
* scanning, we will change the full scan to start from
* there.
*/
r.ckpt_lsn = metafile->ckpt_lsn;
ret = __wt_log_scan(session,
&metafile->ckpt_lsn, 0, __txn_log_recover, &r);
}
if (F_ISSET(conn, WT_CONN_SALVAGE))
ret = 0;
/*
* If log scan couldn't find a file we expected to be around,
* this indicates a corruption of some sort.
*/
if (ret == ENOENT) {
F_SET(conn, WT_CONN_DATA_CORRUPTION);
ret = WT_ERROR;
}
WT_ERR(ret);
}
/* Scan the metadata to find the live files and their IDs. */
WT_ERR(__recovery_file_scan(&r));
/*
* Clear this out. We no longer need it and it could have been
* re-allocated when scanning the files.
*/
WT_NOT_READ(metafile, NULL);
/*
* We no longer need the metadata cursor: close it to avoid pinning any
* resources that could block eviction during recovery.
*/
r.files[0].c = NULL;
WT_ERR(metac->close(metac));
/*
* Now, recover all the files apart from the metadata.
* Pass WT_LOGSCAN_RECOVER so that old logs get truncated.
*/
r.metadata_only = false;
__wt_verbose(session, WT_VERB_RECOVERY | WT_VERB_RECOVERY_PROGRESS,
"Main recovery loop: starting at %" PRIu32 "/%" PRIu32
" to %" PRIu32 "/%" PRIu32, r.ckpt_lsn.l.file, r.ckpt_lsn.l.offset,
r.max_rec_lsn.l.file, r.max_rec_lsn.l.offset);
WT_ERR(__wt_log_needs_recovery(session, &r.ckpt_lsn, &needs_rec));
/*
* Check if the database was shut down cleanly. If not
* return an error if the user does not want automatic
* recovery.
*/
if (needs_rec &&
(FLD_ISSET(conn->log_flags, WT_CONN_LOG_RECOVER_ERR) ||
F_ISSET(conn, WT_CONN_READONLY))) {
if (F_ISSET(conn, WT_CONN_READONLY))
WT_ERR_MSG(session, WT_RUN_RECOVERY,
"Read-only database needs recovery");
WT_ERR_MSG(session, WT_RUN_RECOVERY, "Database needs recovery");
}
if (F_ISSET(conn, WT_CONN_READONLY)) {
do_checkpoint = false;
goto done;
}
/*
* Recovery can touch more data than fits in cache, so it relies on
* regular eviction to manage paging. Start eviction threads for
* recovery without LAS cursors.
*/
WT_ERR(__wt_evict_create(session));
eviction_started = true;
/*
* Always run recovery even if it was a clean shutdown only if
* this is not a read-only connection.
* We can consider skipping it in the future.
*/
if (needs_rec)
FLD_SET(conn->log_flags, WT_CONN_LOG_RECOVER_DIRTY);
if (WT_IS_INIT_LSN(&r.ckpt_lsn))
ret = __wt_log_scan(session, NULL,
WT_LOGSCAN_FIRST | WT_LOGSCAN_RECOVER,
__txn_log_recover, &r);
else
ret = __wt_log_scan(session, &r.ckpt_lsn,
WT_LOGSCAN_RECOVER, __txn_log_recover, &r);
if (F_ISSET(conn, WT_CONN_SALVAGE))
ret = 0;
WT_ERR(ret);
conn->next_file_id = r.max_fileid;
done: WT_ERR(__recovery_set_checkpoint_timestamp(&r));
if (do_checkpoint)
/*
* Forcibly log a checkpoint so the next open is fast and keep
* the metadata up to date with the checkpoint LSN and
* archiving.
*/
WT_ERR(session->iface.checkpoint(&session->iface, "force=1"));
/*
* If we're downgrading and have newer log files, force an archive,
* no matter what the archive setting is.
*/
if (FLD_ISSET(conn->log_flags, WT_CONN_LOG_FORCE_DOWNGRADE))
WT_ERR(__wt_log_truncate_files(session, NULL, true));
FLD_SET(conn->log_flags, WT_CONN_LOG_RECOVER_DONE);
err: WT_TRET(__recovery_free(&r));
__wt_free(session, config);
FLD_CLR(conn->log_flags, WT_CONN_LOG_RECOVER_DIRTY);
if (ret != 0) {
FLD_SET(conn->log_flags, WT_CONN_LOG_RECOVER_FAILED);
__wt_err(session, ret, "Recovery failed");
}
/*
* Destroy the eviction threads that were started in support of
* recovery. They will be restarted once the lookaside table is
* created.
*/
if (eviction_started)
WT_TRET(__wt_evict_destroy(session));
WT_TRET(session->iface.close(&session->iface, NULL));
F_CLR(conn, WT_CONN_RECOVERING);
return (ret);
}