/*
* __logmgr_config --
* Parse and setup the logging server options.
*/
static int
__logmgr_config(WT_SESSION_IMPL *session, const char **cfg, int *runp)
{
WT_CONFIG_ITEM cval;
WT_CONNECTION_IMPL *conn;
conn = S2C(session);
/*
* The logging configuration is off by default.
*/
WT_RET(__wt_config_gets(session, cfg, "log.enabled", &cval));
*runp = cval.val != 0;
/*
* Setup a log path, compression and encryption even if logging is
* disabled in case we are going to print a log.
*/
conn->log_compressor = NULL;
WT_RET(__wt_config_gets_none(session, cfg, "log.compressor", &cval));
WT_RET(__wt_compressor_config(session, &cval, &conn->log_compressor));
WT_RET(__wt_config_gets(session, cfg, "log.path", &cval));
WT_RET(__wt_strndup(session, cval.str, cval.len, &conn->log_path));
/* We are done if logging isn't enabled. */
if (*runp == 0)
return (0);
WT_RET(__wt_config_gets(session, cfg, "log.archive", &cval));
if (cval.val != 0)
FLD_SET(conn->log_flags, WT_CONN_LOG_ARCHIVE);
WT_RET(__wt_config_gets(session, cfg, "log.file_max", &cval));
conn->log_file_max = (wt_off_t)cval.val;
WT_STAT_FAST_CONN_SET(session, log_max_filesize, conn->log_file_max);
WT_RET(__wt_config_gets(session, cfg, "log.prealloc", &cval));
/*
* If pre-allocation is configured, set the initial number to one.
* We'll adapt as load dictates.
*/
if (cval.val != 0) {
FLD_SET(conn->log_flags, WT_CONN_LOG_PREALLOC);
conn->log_prealloc = 1;
}
WT_RET(__wt_config_gets_def(session, cfg, "log.recover", 0, &cval));
if (cval.len != 0 && WT_STRING_MATCH("error", cval.str, cval.len))
FLD_SET(conn->log_flags, WT_CONN_LOG_RECOVER_ERR);
WT_RET(__logmgr_sync_cfg(session, cfg));
return (0);
}
/*
* __logmgr_config --
* Parse and setup the logging server options.
*/
static int
__logmgr_config(
WT_SESSION_IMPL *session, const char **cfg, bool *runp, bool reconfig)
{
WT_CONFIG_ITEM cval;
WT_CONNECTION_IMPL *conn;
bool enabled;
conn = S2C(session);
WT_RET(__wt_config_gets(session, cfg, "log.enabled", &cval));
enabled = cval.val != 0;
/*
* If we're reconfiguring, enabled must match the already
* existing setting.
*
* If it is off and the user it turning it on, or it is on
* and the user is turning it off, return an error.
*/
if (reconfig &&
((enabled && !FLD_ISSET(conn->log_flags, WT_CONN_LOG_ENABLED)) ||
(!enabled && FLD_ISSET(conn->log_flags, WT_CONN_LOG_ENABLED))))
return (EINVAL);
/* Logging is incompatible with in-memory */
if (enabled) {
WT_RET(__wt_config_gets(session, cfg, "in_memory", &cval));
if (cval.val != 0)
WT_RET_MSG(session, EINVAL,
"In memory configuration incompatible with "
"log=(enabled=true)");
}
*runp = enabled;
/*
* Setup a log path and compression even if logging is disabled in case
* we are going to print a log. Only do this on creation. Once a
* compressor or log path are set they cannot be changed.
*/
if (!reconfig) {
conn->log_compressor = NULL;
WT_RET(__wt_config_gets_none(
session, cfg, "log.compressor", &cval));
WT_RET(__wt_compressor_config(
session, &cval, &conn->log_compressor));
WT_RET(__wt_config_gets(session, cfg, "log.path", &cval));
WT_RET(__wt_strndup(
session, cval.str, cval.len, &conn->log_path));
}
/* We are done if logging isn't enabled. */
if (!*runp)
return (0);
WT_RET(__wt_config_gets(session, cfg, "log.archive", &cval));
if (cval.val != 0)
FLD_SET(conn->log_flags, WT_CONN_LOG_ARCHIVE);
if (!reconfig) {
/*
* Ignore if the user tries to change the file size. The
* amount of memory allocated to the log slots may be based
* on the log file size at creation and we don't want to
* re-allocate that memory while running.
*/
WT_RET(__wt_config_gets(session, cfg, "log.file_max", &cval));
conn->log_file_max = (wt_off_t)cval.val;
WT_STAT_FAST_CONN_SET(session,
log_max_filesize, conn->log_file_max);
}
/*
* If pre-allocation is configured, set the initial number to a few.
* We'll adapt as load dictates.
*/
WT_RET(__wt_config_gets(session, cfg, "log.prealloc", &cval));
if (cval.val != 0)
conn->log_prealloc = 1;
/*
* Note that it is meaningless to reconfigure this value during
* runtime. It only matters on create before recovery runs.
*/
WT_RET(__wt_config_gets_def(session, cfg, "log.recover", 0, &cval));
if (cval.len != 0 && WT_STRING_MATCH("error", cval.str, cval.len))
FLD_SET(conn->log_flags, WT_CONN_LOG_RECOVER_ERR);
WT_RET(__wt_config_gets(session, cfg, "log.zero_fill", &cval));
if (cval.val != 0) {
if (F_ISSET(conn, WT_CONN_READONLY))
WT_RET_MSG(session, EINVAL,
"Read-only configuration incompatible with "
"zero-filling log files");
FLD_SET(conn->log_flags, WT_CONN_LOG_ZERO_FILL);
}
WT_RET(__logmgr_sync_cfg(session, cfg));
if (conn->log_cond != NULL)
WT_RET(__wt_cond_auto_signal(session, conn->log_cond));
return (0);
}
/*
* __logmgr_config --
* Parse and setup the logging server options.
*/
static int
__logmgr_config(
WT_SESSION_IMPL *session, const char **cfg, bool *runp, bool reconfig)
{
WT_CONFIG_ITEM cval;
WT_CONNECTION_IMPL *conn;
bool enabled;
/*
* A note on reconfiguration: the standard "is this configuration string
* allowed" checks should fail if reconfiguration has invalid strings,
* for example, "log=(enabled)", or "statistics_log=(path=XXX)", because
* the connection reconfiguration method doesn't allow those strings.
* Additionally, the base configuration values during reconfiguration
* are the currently configured values (so we don't revert to default
* values when repeatedly reconfiguring), and configuration processing
* of a currently set value should not change the currently set value.
*
* In this code path, log server reconfiguration does not stop/restart
* the log server, so there's no point in re-evaluating configuration
* strings that cannot be reconfigured, risking bugs in configuration
* setup, and depending on evaluation of currently set values to always
* result in the currently set value. Skip tests for any configuration
* strings which don't make sense during reconfiguration, but don't
* worry about error reporting because it should never happen.
*/
conn = S2C(session);
WT_RET(__wt_config_gets(session, cfg, "log.enabled", &cval));
enabled = cval.val != 0;
/*
* If we're reconfiguring, enabled must match the already
* existing setting.
*
* If it is off and the user it turning it on, or it is on
* and the user is turning it off, return an error.
*
* See above: should never happen.
*/
if (reconfig &&
((enabled && !FLD_ISSET(conn->log_flags, WT_CONN_LOG_ENABLED)) ||
(!enabled && FLD_ISSET(conn->log_flags, WT_CONN_LOG_ENABLED))))
return (EINVAL);
/* Logging is incompatible with in-memory */
if (enabled) {
WT_RET(__wt_config_gets(session, cfg, "in_memory", &cval));
if (cval.val != 0)
WT_RET_MSG(session, EINVAL,
"In memory configuration incompatible with "
"log=(enabled=true)");
}
*runp = enabled;
/*
* Setup a log path and compression even if logging is disabled in case
* we are going to print a log. Only do this on creation. Once a
* compressor or log path are set they cannot be changed.
*
* See above: should never happen.
*/
if (!reconfig) {
conn->log_compressor = NULL;
WT_RET(__wt_config_gets_none(
session, cfg, "log.compressor", &cval));
WT_RET(__wt_compressor_config(
session, &cval, &conn->log_compressor));
WT_RET(__wt_config_gets(session, cfg, "log.path", &cval));
WT_RET(__wt_strndup(
session, cval.str, cval.len, &conn->log_path));
}
/* We are done if logging isn't enabled. */
if (!*runp)
return (0);
WT_RET(__wt_config_gets(session, cfg, "log.archive", &cval));
if (cval.val != 0)
FLD_SET(conn->log_flags, WT_CONN_LOG_ARCHIVE);
/*
* The file size cannot be reconfigured. The amount of memory allocated
* to the log slots may be based on the log file size at creation and we
* don't want to re-allocate that memory while running.
*
* See above: should never happen.
*/
if (!reconfig) {
WT_RET(__wt_config_gets(session, cfg, "log.file_max", &cval));
conn->log_file_max = (wt_off_t)cval.val;
WT_STAT_FAST_CONN_SET(session,
log_max_filesize, conn->log_file_max);
}
/*
* If pre-allocation is configured, set the initial number to a few.
* We'll adapt as load dictates.
*/
WT_RET(__wt_config_gets(session, cfg, "log.prealloc", &cval));
if (cval.val != 0)
conn->log_prealloc = 1;
/*
* Note it's meaningless to reconfigure this value during runtime, it
* only matters on create before recovery runs.
*
* See above: should never happen.
*/
if (!reconfig) {
WT_RET(__wt_config_gets_def(
session, cfg, "log.recover", 0, &cval));
if (WT_STRING_MATCH("error", cval.str, cval.len))
FLD_SET(conn->log_flags, WT_CONN_LOG_RECOVER_ERR);
}
WT_RET(__wt_config_gets(session, cfg, "log.zero_fill", &cval));
if (cval.val != 0) {
if (F_ISSET(conn, WT_CONN_READONLY))
WT_RET_MSG(session, EINVAL,
"Read-only configuration incompatible with "
"zero-filling log files");
FLD_SET(conn->log_flags, WT_CONN_LOG_ZERO_FILL);
}
WT_RET(__logmgr_sync_cfg(session, cfg));
if (conn->log_cond != NULL)
WT_RET(__wt_cond_auto_signal(session, conn->log_cond));
return (0);
}
