bool DataOStream::_disable()
{
if( !_enabled )
return false;
if( _dataSent )
{
_dataSize = _buffer.getSize();
if( !_connections.empty( ))
{
void* ptr = _buffer.getData() + _bufferStart;
const uint64_t size = _buffer.getSize() - _bufferStart;
if( size == 0 && _bufferStart == _dataSize &&
_compressorState == STATE_PARTIAL )
{
// OPT: all data has been sent in one compressed chunk
_compressorState = STATE_COMPLETE;
#ifndef CO_AGGRESSIVE_CACHING
_buffer.clear();
#endif
}
else
{
_compressorState = STATE_UNCOMPRESSED;
_compress( ptr, size, STATE_PARTIAL );
}
sendData( ptr, size, true ); // always send to finalize istream
}
}
else if( _buffer.getSize() > 0 )
{
_dataSize = _buffer.getSize();
_dataSent = true;
EQASSERT( _bufferStart == 0 );
if( !_connections.empty( ))
{
_compressorState = STATE_UNCOMPRESSED;
_compress( _buffer.getData(), _dataSize, STATE_COMPLETE );
sendData( _buffer.getData(), _dataSize, true );
}
}
#ifndef CO_AGGRESSIVE_CACHING
if( !_save )
_buffer.clear();
#endif
_enabled = false;
return true;
}
// Remove any id groups that contain less than the minimum number of ids
// and clean up the rule
void Rule::_eval ()
{
int start, last, count;
start = 0;
last = m_addr[start];
count = 0;
for (int id = 0; id < m_ids; id++)
{
int addr = m_addr[id];
// If address if ingored then skip it
if (m_flags[addr] == IGNORED)
continue;
// Address distance must not be greater the the rule allows
// else we have moved into another group
if (addr <= (last + RULE_MAX_ERROR + 1))
{
last = addr;
count++;
continue;
}
// End of a match group, check if it meets requirements
if (count < RULE_MIN_MATCH)
{
// Remove this group as is too short
while (count > 0)
{
int a = m_addr[start++];
if (m_flags[a] != IGNORED)
{
m_flags[a] = IGNORED;
count--;
}
}
}
last = addr;
start = id;
count = 1;
}
// End of a match group, check if it meets requirements
if (count < RULE_MIN_MATCH)
{
// Remove this group as is too short
while (count > 0)
{
int a = m_addr[start++];
if (m_flags[a] != IGNORED)
{
m_flags[a] = IGNORED;
count--;
}
}
}
_compress ();
}
void ZCompressor::Deflate(uint8 level)
{
if( _iscompressed || (!size()) || level>9 )
return;
char *buf;
buf=new char[size()+8];
uint32 newsize=size(),oldsize=size();
reserve(size()+8);
_compress((void*)buf, &newsize, (void*)contents(),size(),level);
if(!newsize)
return;
resize(newsize);
rpos(0);
wpos(0);
append(buf,newsize);
delete [] buf;
_iscompressed=true;
_real_size=oldsize;
}
bool compress_volume(std::string password, std::string volumename,
std::string archivefolder, std::string archivename, const params & p)
{
if (!utils::dockerVolExists(volumename))
fatal("Can't compress non-existant volume " + volumename);
return _compress(password, volumename, archivefolder+"/", archivename,p);
}
void DataOStream::_resend()
{
EQASSERT( !_enabled );
EQASSERT( !_connections.empty( ));
EQASSERT( _save );
_compress( _buffer.getData(), _dataSize, STATE_COMPLETE );
sendData( _buffer.getData(), _dataSize, true );
}
bool compress_folder(std::string password, std::string foldername,
std::string archivefolder, std::string archivename, const params & p)
{
if (!utils::fileexists(foldername))
fatal("Can't archive non-existant folder " + foldername);
std::string ap = utils::getcanonicalpath(foldername);
return _compress(password, ap + "/", archivefolder + "/", archivename, p);
}
io_status compressed_pstring::_asciiIn(const char* buf, int size)
{
// use cached version of compression agent
if ( (storage_ptr -> my_oid()).ccode() == MEM_STORAGE_CODE )
agent = (compress_agent_handler*)
(new handler(DICT_AGENT_CODE, storage_ptr));
else
agent = new compress_agent_handler(compress_agent_id, storage_ptr);
pstring::asciiIn(buf, size); // uncompress data part
_compress();
return done;
}
void DataOStream::_flush()
{
EQASSERT( _enabled );
if( !_connections.empty( ))
{
void* ptr = _buffer.getData() + _bufferStart;
const uint64_t size = _buffer.getSize() - _bufferStart;
_compressorState = STATE_UNCOMPRESSED;
_compress( ptr, size, STATE_PARTIAL );
sendData( ptr, size, false );
}
_dataSent = true;
_resetBuffer();
}
io_status compressed_pstring::_asciiIn(istream& in)
{
// use cached version of compression agent
if ( (storage_ptr -> my_oid()).ccode() == MEM_STORAGE_CODE )
agent = (compress_agent_handler*)
(new handler(DICT_AGENT_CODE, storage_ptr));
else
agent = new compress_agent_handler(compress_agent_id, storage_ptr);
pstring::_asciiIn(in);
_compress();
return done;
}
static PyObject *py_compress(PyObject *self, PyObject *args)
{
int src_len, srcpath_len, dst_len, pass_len, level, res;
const char * src;
const char * srcpath;
const char * dst;
const char * pass;
if (!PyArg_ParseTuple(args, "z#z#z#z#i",
&src, &src_len,
&srcpath, &srcpath_len,
&dst, &dst_len,
&pass, &pass_len,
&level)) {
return PyErr_Format(PyExc_ValueError, "expected arguments are compress(src, srcpath, dst, pass, level)");
}
if (src_len < 1) {
return PyErr_Format(PyExc_ValueError, "compress src file is None");
}
if (srcpath_len > 0) {
srcpath_len = 1;
}
if (dst_len < 1) {
return PyErr_Format(PyExc_ValueError, "compress dst file is None");
}
if (level < 1 || 9 < level) {
level = Z_DEFAULT_COMPRESSION;
}
if (pass_len < 1) {
pass = NULL;
}
res = _compress(&src, 1, &srcpath, srcpath_len, dst, level, pass, 1, NULL);
if (res != ZIP_OK) {
return pyerr_msg;
}
Py_RETURN_NONE;
}
int main(const int argc, const char **argv){
initstdio();
#else
int zlibrawstdio2(const int argc, const char **argv){
#endif
char mode,level;
if(argc<2)goto argerror;
mode=argv[1][0],level=argv[1][1];
if(!mode)goto argerror;
if(mode=='-')mode=argv[1][1],level=argv[1][2];
if(mode!='e'&&mode!='c'&&mode!='d')goto argerror;
if(isatty(fileno(stdin))&&isatty(fileno(stdout)))goto argerror;
return mode=='d'?_decompress(stdin,stdout):_compress(stdin,stdout,level?level-'0':9);
argerror:
fprintf(stderr,"zlibrawstdio2 e/d < in > out\nYou can also use -e,-c,-d.\n");
if(!lzmaOpen7z())fprintf(stderr,"\nNote: 7-zip is AVAILABLE.\n"),lzmaClose7z();
else fprintf(stderr,"\nNote: 7-zip is NOT available.\n");
return -1;
}
void WorldPacket::compress(Opcodes opcode)
{
if (opcode == UNKNOWN_OPCODE)
return;
Opcodes uncompressedOpcode = GetOpcode();
uint32 size = wpos();
uint32 destsize = compressBound(size);
std::vector<uint8> storage(destsize);
_compress(static_cast<void*>(&storage[0]), &destsize, static_cast<const void*>(contents()), size);
if (destsize == 0)
return;
clear();
reserve(destsize + sizeof(uint32));
*this << uint32(size);
append(&storage[0], destsize);
SetOpcode(opcode);
sLog->outStaticDebug("Successfully compressed opcode %u (len %u) to %u (len %u)",
uncompressedOpcode, size, opcode, destsize);
}
void WorldPacket::compress(uint32 opcode)
{
if (opcode == OPCODE_NOT_FOUND) // this just doesn't look right, atm not using that define opcode way.
return;
uint32 uncompressedOpcode = GetOpcode();
uint32 size = wpos();
uint32 destsize = compressBound(size);
std::vector<uint8> storage(destsize);
_compress(static_cast<void*>(&storage[0]), &destsize, static_cast<const void*>(contents()), size);
if (destsize == 0)
return;
clear();
reserve(destsize + sizeof(uint32));
*this << uint32(size);
append(&storage[0], destsize);
SetOpcode(opcode);
sLog->outStaticDebug("Successfully compressed opcode %u (len %u) to %u (len %u)",
uncompressedOpcode, size, opcode, destsize);
}
static PyObject *py_compress_multiple(PyObject *self, PyObject *args)
{
int i;
int src_len, srcpath_len, dst_len, pass_len, level, res;
PyObject * src, * srcpath;
char ** srcs, ** srcspath = NULL;
const char * dst;
const char * pass;
PyObject * str_obj; /* the list of strings */
PyObject * strpath_obj; /* the list of path strings */
PyObject * progress_cb_obj = NULL;
if (!PyArg_ParseTuple(args, "O!O!z#z#i|O",
&PyList_Type, &src,
&PyList_Type, &srcpath,
&dst, &dst_len,
&pass, &pass_len,
&level,
&progress_cb_obj)) {
return PyErr_Format(PyExc_ValueError,
"expected arguments are "
"compress_multiple([src], [srcpath], dst, pass, level)");
}
src_len = PyList_Size(src);
if (src_len < 1) {
return PyErr_Format(PyExc_ValueError, "compress src file is None");
}
srcpath_len = PyList_Size(srcpath);
if (srcpath_len < 1) {
srcpath = NULL;
} else if (srcpath_len != src_len) {
return PyErr_Format(PyExc_ValueError, "compress src file list has different length "
"than src file path list");
}
if (dst_len < 1) {
return PyErr_Format(PyExc_ValueError, "compress dst file is None");
}
if (level < 1 || 9 < level) {
level = Z_DEFAULT_COMPRESSION;
}
if (pass_len < 1) {
pass = NULL;
}
if (progress_cb_obj != NULL) {
if (!PyFunction_Check(progress_cb_obj)) {
return PyErr_Format(PyExc_ValueError, "progress must be function or None");
}
}
for (i = 0; i < src_len; i++) {
str_obj = PyList_GetItem(src, i);
#if PY_MAJOR_VERSION >= 3
if (!PyUnicode_Check(str_obj))
#else
if (!PyString_Check(str_obj) && !PyUnicode_Check(str_obj))
#endif
{
return PyErr_Format(PyExc_ValueError, "[src] elements must be strings");
}
}
srcs = (char **)malloc(src_len * sizeof(char *));
if (srcs == NULL) {
return PyErr_NoMemory();
}
for (i = 0; i < src_len; i++) {
str_obj = PyList_GetItem(src, i);
#if PY_MAJOR_VERSION >= 3
srcs[i] = PyUnicode_AsUTF8(str_obj);
#else
srcs[i] = PyString_AsString(str_obj);
#endif
}
if (srcpath) {
for (i = 0; i < srcpath_len; i++) {
strpath_obj = PyList_GetItem(srcpath, i);
#if PY_MAJOR_VERSION >= 3
if (!PyUnicode_Check(strpath_obj))
#else
if (!PyString_Check(strpath_obj) && !PyUnicode_Check(strpath_obj))
#endif
{
return PyErr_Format(PyExc_ValueError, "[srcpath] elements must be strings");
}
}
srcspath = (char **)malloc(srcpath_len * sizeof(char *));
if (srcspath == NULL) {
return PyErr_NoMemory();
}
for (i = 0; i < srcpath_len; i++) {
strpath_obj = PyList_GetItem(srcpath, i);
#if PY_MAJOR_VERSION >= 3
srcspath[i] = PyUnicode_AsUTF8(strpath_obj);
#else
srcspath[i] = PyString_AsString(strpath_obj);
#endif
}
}
res = _compress((const char **)srcs, src_len,
(const char **)srcspath, srcpath_len,
dst, level, pass, 1, progress_cb_obj);
// cleanup free up heap allocated memory
free(srcs);
if (srcspath)
free(srcspath);
if (res != ZIP_OK) {
return pyerr_msg;
}
Py_RETURN_NONE;
}
std::shared_ptr<BaseEncodedSegment> _on_encode(const AnySegmentIterable<pmr_string> segment_iterable,
const PolymorphicAllocator<pmr_string>& allocator) {
/**
* First iterate over the values for two reasons.
* 1) If all the strings are empty LZ4 will try to compress an empty vector which will cause a segmentation fault.
* In this case we can and need to do an early exit.
* 2) Sum the length of the strings to improve the performance when copying the data to the char vector.
*/
auto num_chars = size_t{0u};
segment_iterable.with_iterators([&](auto it, auto end) {
for (; it != end; ++it) {
if (!it->is_null()) {
num_chars += it->value().size();
}
}
});
// copy values and null flags from value segment
auto values = pmr_vector<char>{allocator};
values.reserve(num_chars);
auto null_values = pmr_vector<bool>{allocator};
/**
* If the null value vector only contains the value false, then the value segment does not have any row value that
* is null. In that case, we don't store the null value vector to reduce the LZ4 segment's memory footprint.
*/
auto segment_contains_null = false;
/**
* These offsets mark the beginning of strings (and therefore end of the previous string) in the data vector.
* These offsets are character offsets. The string at position 0 starts at the offset stored at position 0, which
* will always be 0.
* Its exclusive end is the offset stored at position 1 (i.e., offsets[1] - 1 is the last character of the string
* at position 0).
* In case of the last string its end is determined by the end of the data vector.
*
* The offsets are stored as 32 bit unsigned integer as opposed to 64 bit (size_t) so that they can later be
* compressed via vector compression.
*/
auto offsets = pmr_vector<uint32_t>{allocator};
/**
* These are the lengths of each string. They are needed to train the zstd dictionary.
*/
auto string_samples_lengths = pmr_vector<size_t>{allocator};
segment_iterable.with_iterators([&](auto it, auto end) {
const auto segment_size = std::distance(it, end);
null_values.resize(segment_size);
offsets.resize(segment_size);
string_samples_lengths.resize(segment_size);
auto offset = uint32_t{0u};
// iterate over the iterator to access the values and increment the row index to write to the values and null
// values vectors
auto row_index = size_t{0};
for (; it != end; ++it) {
const auto segment_element = *it;
const auto contains_null = segment_element.is_null();
null_values[row_index] = contains_null;
segment_contains_null = segment_contains_null || contains_null;
offsets[row_index] = offset;
auto sample_size = size_t{0u};
if (!contains_null) {
const auto value = segment_element.value();
const auto string_length = value.size();
values.insert(values.cend(), value.begin(), value.end());
Assert(string_length <= std::numeric_limits<uint32_t>::max(),
"The size of string row value exceeds the maximum of uint32 in LZ4 encoding.");
offset += static_cast<uint32_t>(string_length);
sample_size = string_length;
}
string_samples_lengths[row_index] = sample_size;
++row_index;
}
});
auto optional_null_values = segment_contains_null ? std::optional<pmr_vector<bool>>{null_values} : std::nullopt;
/**
* If the input only contained null values and/or empty strings we don't need to compress anything (and LZ4 will
* cause an error). We can also throw away the offsets, since they won't be used for decompression.
* We can do an early exit and return the (not encoded) segment.
*/
if (num_chars == 0) {
auto empty_blocks = pmr_vector<pmr_vector<char>>{allocator};
auto empty_dictionary = pmr_vector<char>{};
return std::allocate_shared<LZ4Segment<pmr_string>>(allocator, std::move(empty_blocks),
std::move(optional_null_values), std::move(empty_dictionary),
nullptr, _block_size, 0u, 0u, null_values.size());
}
// Compress the offsets with a vector compression method to reduce the memory footprint of the LZ4 segment.
auto compressed_offsets = compress_vector(offsets, vector_compression_type(), allocator, {offsets.back()});
/**
* Pre-compute a zstd dictionary if the input data is split among multiple blocks. This dictionary allows
* independent compression of the blocks, while maintaining a good compression ratio.
* If the input data fits into a single block, training of a dictionary is skipped.
*/
const auto input_size = values.size();
auto dictionary = pmr_vector<char>{allocator};
if (input_size > _block_size) {
dictionary = _train_dictionary(values, string_samples_lengths);
}
/**
* Compress the data and calculate the last block size (which may vary from the block size of the previous blocks)
* and the total compressed size. The size of the last block is needed for decompression. The total compressed size
* is pre-calculated instead of iterating over all blocks when the memory consumption of the LZ4 segment is
* estimated.
*/
auto lz4_blocks = pmr_vector<pmr_vector<char>>{allocator};
_compress(values, lz4_blocks, dictionary);
auto last_block_size = input_size % _block_size != 0 ? input_size % _block_size : _block_size;
auto total_compressed_size = size_t{0u};
for (const auto& compressed_block : lz4_blocks) {
total_compressed_size += compressed_block.size();
}
return std::allocate_shared<LZ4Segment<pmr_string>>(
allocator, std::move(lz4_blocks), std::move(optional_null_values), std::move(dictionary),
std::move(compressed_offsets), _block_size, last_block_size, total_compressed_size, null_values.size());
}
std::shared_ptr<BaseEncodedSegment> _on_encode(const AnySegmentIterable<T> segment_iterable,
const PolymorphicAllocator<T>& allocator) {
// TODO(anyone): when value segments switch to using pmr_vectors, the data can be copied directly instead of
// copying it element by element
auto values = pmr_vector<T>{allocator};
auto null_values = pmr_vector<bool>{allocator};
/**
* If the null value vector only contains the value false, then the value segment does not have any row value that
* is null. In that case, we don't store the null value vector to reduce the LZ4 segment's memory footprint.
*/
auto segment_contains_null = false;
segment_iterable.with_iterators([&](auto it, auto end) {
const auto segment_size = static_cast<size_t>(std::distance(it, end));
values.resize(segment_size);
null_values.resize(segment_size);
// iterate over the segment to access the values and increment the row index to copy values and null flags
auto row_index = size_t{0u};
for (; it != end; ++it) {
const auto segment_value = *it;
const auto contains_null = segment_value.is_null();
values[row_index] = segment_value.value();
null_values[row_index] = contains_null;
segment_contains_null = segment_contains_null || contains_null;
++row_index;
}
});
auto optional_null_values = segment_contains_null ? std::optional<pmr_vector<bool>>{null_values} : std::nullopt;
/**
* Pre-compute a zstd dictionary if the input data is split among multiple blocks. This dictionary allows
* independent compression of the blocks, while maintaining a good compression ratio.
* If the input data fits into a single block, training of a dictionary is skipped.
*/
const auto input_size = values.size() * sizeof(T);
auto dictionary = pmr_vector<char>{};
if (input_size > _block_size) {
dictionary = _train_dictionary(values);
}
/**
* Compress the data and calculate the last block size (which may vary from the block size of the previous blocks)
* and the total compressed size. The size of the last block is needed for decompression. The total compressed
* size is pre-calculated instead of iterating over all blocks when the memory consumption of the LZ4 segment is
* estimated.
*/
auto lz4_blocks = pmr_vector<pmr_vector<char>>{allocator};
auto total_compressed_size = size_t{0u};
auto last_block_size = size_t{0u};
if (!values.empty()) {
_compress(values, lz4_blocks, dictionary);
last_block_size = input_size % _block_size != 0 ? input_size % _block_size : _block_size;
for (const auto& compressed_block : lz4_blocks) {
total_compressed_size += compressed_block.size();
}
}
return std::allocate_shared<LZ4Segment<T>>(allocator, std::move(lz4_blocks), std::move(optional_null_values),
std::move(dictionary), _block_size, last_block_size,
total_compressed_size, values.size());
}
int main(const int argc, const char **argv){
initstdio();
#else
int _7ciso(const int argc, const char **argv){
#endif
int cmode=0,mode=0;
int zlib=0,sevenzip=0,zopfli=0,miniz=0,slz=0,libdeflate=0;
int threshold=100;
poptContext optCon;
int optc;
struct poptOption optionsTable[] = {
//{ "longname", "shortname", argInfo, *arg, int val, description, argment description}
{ "stdout", 'c', POPT_ARG_NONE, &cmode, 0, "stdout (currently ignored)", NULL },
{ "zlib", 'z', POPT_ARG_INT|POPT_ARGFLAG_OPTIONAL, NULL, 'z', "1-9 (default 6) zlib", "level" },
{ "miniz", 'm', POPT_ARG_INT|POPT_ARGFLAG_OPTIONAL, NULL, 'm', "1-2 (default 1) miniz", "level" },
{ "slz", 's', POPT_ARG_INT|POPT_ARGFLAG_OPTIONAL, NULL, 's', "1-1 (default 1) slz", "level" },
{ "libdeflate", 'l', POPT_ARG_INT|POPT_ARGFLAG_OPTIONAL, NULL, 'l', "1-12 (default 6) libdeflate", "level" },
{ "7zip", 'S', POPT_ARG_INT|POPT_ARGFLAG_OPTIONAL, NULL, 'S', "1-9 (default 2) 7zip", "level" },
{ "zopfli", 'Z', POPT_ARG_INT, &zopfli, 0, "zopfli", "numiterations" },
{ "threshold", 't', POPT_ARG_INT, &threshold, 0, "compression threshold (in %, 10-100)", "threshold" },
{ "decompress", 'd', POPT_ARG_NONE, &mode, 0, "decompress", NULL },
POPT_AUTOHELP,
POPT_TABLEEND,
};
optCon = poptGetContext(argv[0], argc, argv, optionsTable, 0);
poptSetOtherOptionHelp(optCon, "{-z9 dec.iso enc.cso} or {-cd <enc.cso >dec.iso}");
for(;(optc=poptGetNextOpt(optCon))>=0;){
switch(optc){
case 'z':{
char *arg=poptGetOptArg(optCon);
if(arg)zlib=strtol(arg,NULL,10),free(arg);
else zlib=6;
break;
}
case 'm':{
char *arg=poptGetOptArg(optCon);
if(arg)miniz=strtol(arg,NULL,10),free(arg);
else miniz=1;
break;
}
case 's':{
char *arg=poptGetOptArg(optCon);
if(arg)slz=strtol(arg,NULL,10),free(arg);
else slz=1;
break;
}
case 'l':{
char *arg=poptGetOptArg(optCon);
if(arg)libdeflate=strtol(arg,NULL,10),free(arg);
else libdeflate=1;
break;
}
case 'S':{
char *arg=poptGetOptArg(optCon);
if(arg)sevenzip=strtol(arg,NULL,10),free(arg);
else sevenzip=2;
break;
}
}
}
int level_sum=zlib+sevenzip+zopfli+miniz+slz+libdeflate;
if(
optc<-1 ||
(!mode&&!zlib&&!sevenzip&&!zopfli&&!miniz&&!slz&&!libdeflate) ||
(mode&&(zlib||sevenzip||zopfli||miniz||slz||libdeflate)) ||
(!mode&&(level_sum==zlib)+(level_sum==sevenzip)+(level_sum==zopfli)+(level_sum==miniz)+(level_sum==slz)+(level_sum==libdeflate)!=1)
){
poptPrintHelp(optCon, stderr, 0);
poptFreeContext(optCon);
if(!lzmaOpen7z())fprintf(stderr,"\nNote: 7-zip is AVAILABLE.\n"),lzmaClose7z();
else fprintf(stderr,"\nNote: 7-zip is NOT available.\n");
return 1;
}
if(mode){
if(isatty(fileno(stdin))||isatty(fileno(stdout)))
{poptPrintHelp(optCon, stderr, 0);poptFreeContext(optCon);return -1;}
poptFreeContext(optCon);
//lzmaOpen7z();
int ret=_decompress(stdin,stdout);
//lzmaClose7z();
return ret;
}else{
if(threshold<10)threshold=10;
if(threshold>100)threshold=100;
const char *fname=poptGetArg(optCon);
if(!fname){poptPrintHelp(optCon, stderr, 0);poptFreeContext(optCon);return -1;}
FILE *in=fopen(fname,"rb");
if(!in){fprintf(stderr,"failed to open %s\n",fname);poptFreeContext(optCon);return 2;}
fname=poptGetArg(optCon);
if(!fname){poptPrintHelp(optCon, stderr, 0);poptFreeContext(optCon);return -1;}
FILE *out=fopen(fname,"wb");
if(!out){fclose(in);fprintf(stderr,"failed to open %s\n",fname);poptFreeContext(optCon);return 2;}
poptFreeContext(optCon);
fprintf(stderr,"compression level = %d ",level_sum);
int ret=0;
if(zlib){
fprintf(stderr,"(zlib)\n");
ret=_compress(in,out,zlib,DEFLATE_ZLIB,threshold);
}else if(sevenzip){
fprintf(stderr,"(7zip)\n");
if(lzmaOpen7z()){
fprintf(stderr,"7-zip is NOT available.\n");
return -1;
}
ret=_compress(in,out,sevenzip,DEFLATE_7ZIP,threshold);
lzmaClose7z();
}else if(zopfli){
fprintf(stderr,"(zopfli)\n");
ret=_compress(in,out,zopfli,DEFLATE_ZOPFLI,threshold);
}else if(miniz){
fprintf(stderr,"(miniz)\n");
ret=_compress(in,out,miniz,DEFLATE_MINIZ,threshold);
}else if(slz){
fprintf(stderr,"(slz)\n");
ret=_compress(in,out,slz,DEFLATE_SLZ,threshold);
}else if(libdeflate){
fprintf(stderr,"(libdeflate)\n");
ret=_compress(in,out,libdeflate,DEFLATE_LIBDEFLATE,threshold);
}
fclose(in),fclose(out);
return ret;
}
}
