static void sensors_callback(sensors_evt_t evt, sensors_data_t *data)
{
switch (evt) {
case SI7020_TEMP_MEAS_EVT:
NRF_LOG_PRINTF("[APPL] Temperature measurement, %.2f.\r\n", data->temperature);
// bluetooth_update_temperature(data->temperature);
if (m_adv_state == W_ADV_STATE_IDLE) {
advertising_init();
advertising_start();
}
break;
case SI7020_HUM_MEAS_EVT:
NRF_LOG_PRINTF("[APP] T=%d.%02d°C, RH=%d.%02d%%\r\n", (uint32_t)data->temperature,
(uint32_t)(100.0 * data->temperature) - 100 * (uint32_t)data->temperature,
(uint32_t)data->humidity,
(uint32_t)(100.0 * data->humidity) - 100 * (uint32_t)data->humidity);
// bluetooth_update_temperature(data->temperature);
// bluetooth_update_humidity(data->humidity);
if (m_adv_state == W_ADV_STATE_IDLE) {
advertising_init();
advertising_start();
}
break;
}
}
/**@brief Function for handling the Application's BLE Stack events.
*
* @param[in] p_ble_evt Bluetooth stack event.
*/
static void on_ble_evt(ble_evt_t * p_ble_evt)
{
uint32_t err_code;
switch (p_ble_evt->header.evt_id)
{
case BLE_GAP_EVT_CONNECTED:
debug_printf("Connected :)\r\n");
m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
app_beacon_stop();
app_timer_start(m_temperature_timer_id, TEMPERATURE_MEAS_INTERVAL, NULL);
app_timer_start(m_door_timer_id, DOOR_MEAS_INTERVAL, NULL);
break;
case BLE_GAP_EVT_DISCONNECTED:
app_beacon_start();
// when not using the timeslot implementation, it is necessary to initialize the advertizing data again.
advertising_init();
err_code = ble_advertising_start(BLE_ADV_MODE_FAST);
APP_ERROR_CHECK(err_code);
app_timer_stop(m_temperature_timer_id);
app_timer_stop(m_door_timer_id);
debug_printf("Disconnected, Advertising peripheral again \r\n");
break;
default:
// No implementation needed.
break;
}
}
/**@brief Application main function.
*/
int main(void)
{
// Initialize
leds_init();
buttons_init();
ble_stack_init();
bond_manager_init();
timers_init();
gap_params_init();
advertising_init();
services_init();
sensor_sim_init();
conn_params_init();
sec_params_init();
radio_notification_init();
// Start execution
application_timers_start();
advertising_start();
// Enter main loop
for (;;)
{
power_manage();
}
}
/**@brief Function for application main entry.
*/
int main(void)
{
SEGGER_RTT_WriteString(0, "\033[2JTutorial Start.\n\n");
uint32_t err_code;
bool erase_bonds;
// Initialize.
timers_init();
buttons_leds_init(&erase_bonds);
ble_stack_init();
device_manager_init(erase_bonds);
gap_params_init();
services_init();
advertising_init();
conn_params_init();
// Start execution.
application_timers_start();
err_code = ble_advertising_start(BLE_ADV_MODE_FAST);
APP_ERROR_CHECK(err_code);
// Enter main loop.
for (;;)
{
power_manage();
}
}
uint32_t dfu_transport_update_start()
{
uint32_t err_code;
m_pkt_type = PKT_TYPE_INVALID;
leds_init();
err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
if (err_code != NRF_SUCCESS)
{
return err_code;
}
dfu_register_callback(dfu_cb_handler);
err_code = hci_mem_pool_open();
if (err_code != NRF_SUCCESS)
{
return err_code;
}
gap_params_init();
services_init();
advertising_init();
conn_params_init();
sec_params_init();
advertising_start();
return NRF_SUCCESS;
}
/**@brief Function for the application main entry.
*/
int main(void)
{
uint32_t err_code;
timers_init();
gpiote_init();
buttons_init();
ble_stack_init();
device_manager_init();
// Initialize Bluetooth Stack parameters.
gap_params_init();
services_init();
advertising_init();
conn_params_init();
// Start advertising.
advertising_start();
// Enter main loop.
for (;;)
{
// Switch to a low power state until an event is available for the application
err_code = sd_app_evt_wait();
APP_ERROR_CHECK(err_code);
}
}
/**@brief Function for application main entry.
*/
int main(void)
{
uint32_t err_code;
// Initialize.
app_trace_init();
timers_init();
bool erase_bonds;
buttons_leds_init(&erase_bonds);
device_manager_init(erase_bonds);
ble_stack_init();
gap_params_init();
advertising_init();
services_init();
sensor_simulator_init();
conn_params_init();
// Start execution.
application_timers_start();
err_code = ble_advertising_start(BLE_ADV_MODE_FAST);
APP_ERROR_CHECK(err_code);
// Enter main loop.
for (;;)
{
power_manage();
}
}
/**@brief Function for application main entry.
*/
int main(void)
{
uint32_t err_code;
// Initialize.
app_trace_init();
timers_init();
gpiote_init();
err_code = bsp_init(BSP_INIT_LED | BSP_INIT_BUTTONS,
APP_TIMER_TICKS(100, APP_TIMER_PRESCALER),
button_event_handler);
APP_ERROR_CHECK(err_code);
ble_stack_init();
adc_configure();
device_manager_init();
gap_params_init();
advertising_init(BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE);
services_init();
conn_params_init();
// Start execution.
advertising_start();
// Enter main loop.
for (;;)
{
power_manage();
}
}
/**@brief Application main function.
*/
int main(void)
{
uint32_t err_code;
bool erase_bonds;
// Initialize.
APP_TIMER_INIT(APP_TIMER_PRESCALER, APP_TIMER_OP_QUEUE_SIZE, false);
buttons_leds_init(&erase_bonds);
ble_stack_init();
gap_params_init();
services_init();
advertising_init();
conn_params_init();
gpio_init();
timer_init(); //timer task to refresh RGB LED Board
game_init();
err_code = ble_advertising_start(BLE_ADV_MODE_FAST);
APP_ERROR_CHECK(err_code);
// Enter main loop.
for (;;) {
power_manage();
moveDisc(getInput());
}
}
/**@brief Function for application main entry.
*/
int main(void)
{
uint32_t err_code;
bool erase_bonds;
// Initialize
timers_init();
nrf_log_init();
buttons_leds_init(&erase_bonds);
ble_stack_init();
device_manager_init(erase_bonds);
db_discovery_init();
scheduler_init();
gap_params_init();
advertising_init();
services_init();
conn_params_init();
// Start execution
err_code = ble_advertising_start(BLE_ADV_MODE_FAST);
APP_ERROR_CHECK(err_code);
NRF_LOG("\r\nCTS Start!\r\n");
// Enter main loop
for (;;)
{
app_sched_execute();
power_manage();
}
}
/**@brief Function for application main entry.
*/
int main(void)
{
uint32_t err_code;
bool erase_bonds;
// Initialize.
timers_init();
buttons_leds_init(&erase_bonds);
ble_stack_init();
device_manager_init(erase_bonds);
gap_params_init();
advertising_init();
services_init();
conn_params_init();
saadc_init();
// Start execution.
application_timers_start();
err_code = ble_advertising_start(BLE_ADV_MODE_FAST);
APP_ERROR_CHECK(err_code);
// Enter main loop.
for (;;)
{
// trigger next ADC conversion
nrf_drv_saadc_sample_convert(0,&adc_sample);
advdata.p_manuf_specific_data->data.p_data[0] = adc_sample/100 + '0';
advdata.p_manuf_specific_data->data.p_data[1] = adc_sample%100/10 + '0';
advdata.p_manuf_specific_data->data.p_data[2] = adc_sample%10 + '0';
nrf_delay_ms(100);
ble_advdata_set(&advdata, NULL);
}
}
/**@brief Application main function.
*/
int main(void)
{
// Initialize
leds_init();
timers_init();
gpiote_init();
buttons_init();
bond_manager_init();
ble_stack_init();
ble_error_log_init();
gap_params_init();
advertising_init();
alert_notification_init();
conn_params_init();
sec_params_init();
radio_notification_init();
// Start execution
advertising_start();
// Enter main loop
for (;;)
{
power_manage();
}
}
/**@brief Function for starting advertising.
*/
static uint32_t advertising_start(void)
{
uint32_t err_code;
ble_gap_adv_params_t adv_params;
if ((m_flags & DFU_BLE_FLAG_IS_ADVERTISING) != 0)
{
return NRF_SUCCESS;
}
// Initialize advertising parameters (used when starting advertising).
memset(&adv_params, 0, sizeof(adv_params));
err_code = advertising_init(BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE);
VERIFY_SUCCESS(err_code);
adv_params.type = BLE_GAP_ADV_TYPE_ADV_IND;
adv_params.p_peer_addr = NULL;
adv_params.fp = BLE_GAP_ADV_FP_ANY;
adv_params.interval = APP_ADV_INTERVAL;
adv_params.timeout = APP_ADV_TIMEOUT_IN_SECONDS;
err_code = sd_ble_gap_adv_start(&adv_params);
VERIFY_SUCCESS(err_code);
dfu_set_status(DFUS_ADVERTISING_START);
m_flags |= DFU_BLE_FLAG_IS_ADVERTISING;
return NRF_SUCCESS;
}
/**@brief Function for application main entry.
*/
int main(void)
{
uint32_t err_code;
// Initialize
timers_init();
ble_stack_init();
bsp_module_init();
scheduler_init();
gap_params_init();
advertising_init();
services_init();
conn_params_init();
sec_params_init();
// Start execution
timers_start();
err_code = ble_advertising_start(BLE_ADV_MODE_FAST);
APP_ERROR_CHECK(err_code);
// Enter main loop
for (;;)
{
app_sched_execute();
power_manage();
}
}
/**@brief Function for application main entry.
*/
int main(void)
{
uint32_t err_code;
bool erase_bonds;
#ifdef ENABLE_DEBUG_LOG_SUPPORT
app_trace_init();
#endif
APPL_LOG("START\r\n");
// Initialize.
timers_init();
buttons_leds_init(&erase_bonds);
adc_config();
ble_stack_init();
device_manager_init(erase_bonds);
gap_params_init();
advertising_init();
services_init();
conn_params_init();
// Start execution.
err_code = ble_advertising_start(BLE_ADV_MODE_FAST);
APP_ERROR_CHECK(err_code);
APPL_LOG("start advertising : %u\n", err_code);
// Enter main loop.
for (;;)
{
power_manage();
}
}
int main(void) {
// Initialization
led_init(SQUALL_LED_PIN);
led_init(BLEES_LED_PIN);
led_on(SQUALL_LED_PIN);
led_on(BLEES_LED_PIN);
timers_init(); // must start before conn_params
// Setup BLE and services
ble_stack_init();
gap_params_init();
advertising_init();
services_init();
conn_params_init();
// Advertise data
adv_physweb();
advertising_start();
// Initialization complete
led_off(SQUALL_LED_PIN);
led_off(BLEES_LED_PIN);
timers_start();
while (1) {
power_manage();
}
}
/**@brief Function for application main entry.
*/
int main(void)
{
// Initialize.
app_trace_init();
leds_init();
buttons_init();
timers_init();
ble_stack_init();
device_manager_init();
gap_params_init();
advertising_init();
services_init();
sensor_sim_init();
conn_params_init();
// Start execution.
application_timers_start();
advertising_start();
// Enter main loop.
for (;;)
{
power_manage();
}
}
int main(void)
{
// uint32_t err_code;
APP_TIMER_INIT(APP_TIMER_PRESCALER, APP_TIMER_MAX_TIMERS, APP_TIMER_OP_QUEUE_SIZE, false);
APP_GPIOTE_INIT(APP_GPIOTE_MAX_USERS);
ble_stack_init();
sys_Initialize();
sys_Timer_Handler_Init();
gap_params_init();
services_init();
advertising_init();
conn_params_init();
sec_params_init();
sys_printf("Gift Air Project Start\n\r");
advertising_start();
sys_Timer_Handler_Start();
NRF_WDT->RR[0] = WDT_RR_RR_Reload; //Reload watchdog register 0
// Enter main loop
for (;;)
{
power_manage(); //2sec, 200ms
}
}
*/
int main(void)
{
// Initialize.
leds_init();
timers_init();
gpiote_init();
buttons_init();
ble_stack_init();
bond_manager_init();
gap_params_init();
advertising_init(BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE);
services_init();
sensor_sim_init();
conn_params_init();
sec_params_init();
// Start execution.
advertising_start();
// Enter main loop.
for (;;)
{
power_manage();
}
/**@brief Function for application main entry.
*/
int main(void)
{
// Initialize.
leds_init();
buttons_init();
timers_init();
ble_stack_init();
device_manager_init();
gap_params_init();
advertising_init();
services_init();
sensor_sim_init();
conn_params_init();
//simple_uart_config(31,9,31,31,false);
//simple_uart_putstring("Starting...");
// Start execution.
//Turn off HRM update
//application_timers_start();
advertising_start();
// Enter main loop.
for (;;)
{
power_manage();
}
}
/**@brief Function for application main entry.
*/
int main(void)
{
// Initialize
timers_init();
gpiote_init();
ble_stack_init();
bsp_module_init();
scheduler_init();
gap_params_init();
advertising_init();
services_init();
conn_params_init();
sec_params_init();
// Start execution
timers_start();
advertising_start();
// Enter main loop
for (;;)
{
app_sched_execute();
power_manage();
}
}
/**
* @brief Function for application main entry.
*/
int main(void)
{
uint32_t err_code;
//Initialize.
app_trace_init();
leds_init();
scheduler_init();
timers_init();
iot_timer_init();
button_init();
ble_stack_init();
advertising_init();
ip_stack_init ();
//Start execution.
advertising_start();
//Enter main loop.
for (;;)
{
//Execute event schedule.
app_sched_execute();
//Sleep waiting for an application event.
err_code = sd_app_evt_wait();
APP_ERROR_CHECK(err_code);
}
}
/**@brief Application main function.
*/
int main(void)
{
uint32_t err_code;
bool erase_bonds;
// Initialize.
APP_TIMER_INIT(APP_TIMER_PRESCALER, APP_TIMER_OP_QUEUE_SIZE, false);
uart_init();
buttons_leds_init(&erase_bonds);
ble_stack_init();
gap_params_init();
services_init();
advertising_init();
conn_params_init();
printf("\r\nUART Start!\r\n");
err_code = ble_advertising_start(BLE_ADV_MODE_FAST);
APP_ERROR_CHECK(err_code);
// Enter main loop.
for (;;)
{
power_manage();
}
}
/**
* @brief Function for application main entry.
*/
int main(void)
{
nrf_gpio_cfg_output(SENSORS_ON);
nrf_gpio_pin_set(SENSORS_ON);
ble_stack_init(); // Initialize Bluetooth stack
spi_base_addr = (uint32_t)spi_master_init(SPI0, SPI_MODE0, false);
CC110L_setupspibaseaddr(spi_base_addr);
setup_cc110l();
advertising_init();
// Start execution.
PacketData_Update();
advertising_start();
TWI_init();
MPL3115A2_Init();
HDC1008_Init();
HDC1008_TriggerHumidity();
TWI_powerdown();
ble_radio_notification_init(3, NRF_RADIO_NOTIFICATION_DISTANCE_5500US, radio_notification_evt_handler);
// Enter main loop.
for (;;)
{
power_manage();
}
}
/**@brief Application main function.
*/
int main(void)
{
//printf("main");
uint8_t start_string[] = START_STRING;
uint32_t err_code;
// Initialize.
APP_TIMER_INIT(APP_TIMER_PRESCALER, APP_TIMER_MAX_TIMERS, APP_TIMER_OP_QUEUE_SIZE, false);
APP_GPIOTE_INIT(APP_GPIOTE_MAX_USERS);
ble_stack_init();
//uart_init();
err_code = bsp_init(BSP_INIT_LED | BSP_INIT_BUTTONS,
APP_TIMER_TICKS(100, APP_TIMER_PRESCALER),
NULL);
APP_ERROR_CHECK(err_code);
err_code = bsp_buttons_enable(1 << WAKEUP_BUTTON_ID);
APP_ERROR_CHECK(err_code);
gap_params_init();
services_init();
advertising_init();
conn_params_init();
sec_params_init();
printf("%s",start_string);
advertising_start();
init_leds();
for (;;)
{
power_manage();
}
}
/**@brief Function for handling the Application's BLE Stack events.
*
* @param[in] p_ble_evt Bluetooth stack event.
*/
static void on_ble_evt(ble_evt_t * p_ble_evt)
{
uint32_t err_code;
switch (p_ble_evt->header.evt_id)
{
case BLE_GAP_EVT_CONNECTED:
err_code = bsp_indication_set(BSP_INDICATE_CONNECTED);
APP_ERROR_CHECK(err_code);
m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
app_beacon_start();
break;
case BLE_GAP_EVT_DISCONNECTED:
err_code = bsp_indication_set(BSP_INDICATE_IDLE);
APP_ERROR_CHECK(err_code);
app_beacon_stop();
// when not using the timeslot implementation, it is necessary to initialize the advertizing data again.
advertising_init();
err_code = ble_advertising_start(BLE_ADV_MODE_FAST);
APP_ERROR_CHECK(err_code);
break;
default:
// No implementation needed.
break;
}
}
/**@brief Function for application main entry.
*/
int main(void)
{
bool erase_bonds;
// Initialize.
app_trace_init();
timers_init();
buttons_leds_init(&erase_bonds);
ble_stack_init();
adc_configure();
device_manager_init(erase_bonds);
gap_params_init();
advertising_init(BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE);
services_init();
conn_params_init();
// Start execution.
advertising_start();
// Enter main loop.
for (;;)
{
power_manage();
}
}
/**@brief Function for initializing the transport of IPv6. */
uint32_t ipv6_transport_init(void)
{
ble_stack_init();
advertising_init();
return NRF_SUCCESS;
}
/**@brief Function for application main entry.
*/
int main(void)
{
bool erase_bonds;
// Initialize.
log_init();
timers_init();
buttons_leds_init(&erase_bonds);
power_management_init();
ble_stack_init();
gap_params_init();
gatt_init();
services_init();
advertising_init();
conn_params_init();
peer_manager_init();
// Start execution.
NRF_LOG_INFO("OurCharacteristics tutorial started.");
application_timers_start();
advertising_start(erase_bonds);
// Enter main loop.
for (;;)
{
idle_state_handle();
}
}
int main(void)
{
uint32_t err_code;
bool erase_bonds;
// Initialize.
APP_TIMER_INIT(APP_TIMER_PRESCALER, APP_TIMER_MAX_TIMERS, APP_TIMER_OP_QUEUE_SIZE, NULL);
buttons_leds_init(&erase_bonds);
uart_init();
printf("Relay Example\r\n");
ble_stack_init();
device_manager_init(erase_bonds);
db_discovery_init();
hrs_c_init();
rscs_c_init();
gap_params_init();
services_init();
advertising_init();
conn_params_init();
// Start scanning for peripherals and initiate connection
// with devices that advertise Heart Rate UUID.
scan_start();
// Start advertising.
err_code = ble_advertising_start(BLE_ADV_MODE_FAST);
APP_ERROR_CHECK(err_code);
for (;; )
{
power_manage();
}
}
