HG_ERROR SoundManager::initialize()
{
HG_ERROR err = HG_OK;
BREAK_START;
mDevice = alcOpenDevice(NULL);
if (mDevice == NULL)
{
err = HG_ERROR_AL_DEVICE_NOT_SUPPORT;
break;
}
mContext = alcCreateContext(mDevice, NULL);
if (mContext == NULL)
{
err = HG_ERROR_AL_CONTEXT_FAILED;
break;
}
alcMakeContextCurrent(mContext);
alListenerf(AL_GAIN, 1.0f);
// Doppler
alDopplerFactor(1.0f);
alDopplerVelocity(343.0f);
BREAK_END;
return err;
}
static int lua_alDopplerVelocity(lua_State* lua_state)
{
ALfloat the_value;
the_value = lua_tonumber(lua_state, 1);
alDopplerVelocity(the_value);
return 0;
}
ALuint Systems::SoundSystem::CreateSource()
{
ALuint source;
alGenSources((ALuint)1, &source);
alDopplerFactor(1); // Numbers greater than 1 will increase Doppler effect, numbers lower than 1 will decrease the Doppler effect
alDopplerVelocity(350.f); // Defines the velocity of the sound
return source;
}
Handle<Value> ALDopplerVelocityCallback(const Arguments& args) {
//if less that nbr of formal parameters then do nothing
if (args.Length() < 1)
return v8::Undefined();
//get arguments
double arg0 = args[0]->NumberValue();
//make call
alDopplerVelocity((ALfloat)arg0);
return v8::Undefined();
}
void ConfigurarEntorno ( ALsizei identificador, ALenum modelo,
ALfloat doppler_factor, ALfloat doppler_vel,
ALint room, ALint room_high_frequency,
ALfloat rolloff_factor, ALfloat decay_time,
ALfloat decay_high_frequency_ratio, ALint reflections,
ALfloat reflections_delay, ALint reverb,
ALfloat reverb_delay, ALfloat diffusion,
ALfloat density, ALfloat high_frequency_reference ){
/* Configuramos la atenuacion y el efecto doppler */
alEnable ( AL_DISTANCE_MODEL );
alDistanceModel ( modelo );
alDopplerFactor ( doppler_factor );
alDopplerVelocity ( doppler_vel ); /* Recordad que en metros la velocidad del sonido es 343 */
#ifdef _LINUX
/* Generamos el entorno y comprobamos errores */
alGenEnvironmentIASIG ( identificador, &entornos[identificador] );
if ( !alIsEnvironmentIASIG ( entornos[identificador] )){
fprintf ( logs, "No se puede configurar parte del entorno\n");
}
/* Configuramos las propiedades del entorno */
alEnvironmentiIASIG ( entornos[identificador], AL_ENV_ROOM_IASIG, room );
alEnvironmentiIASIG ( entornos[identificador], AL_ENV_ROOM_HIGH_FREQUENCY_IASIG,
room_high_frequency);
alEnvironmentfIASIG ( entornos[identificador], AL_ENV_ROOM_ROLLOFF_FACTOR_IASIG, rolloff_factor );
alEnvironmentfIASIG ( entornos[identificador], AL_ENV_DECAY_TIME_IASIG, decay_time );
alEnvironmentfIASIG ( entornos[identificador], AL_ENV_DECAY_HIGH_FREQUENCY_RATIO_IASIG,
decay_high_frequency_ratio );
alEnvironmentiIASIG ( entornos[identificador], AL_ENV_REFLECTIONS_IASIG, reflections );
alEnvironmentfIASIG ( entornos[identificador], AL_ENV_REFLECTIONS_DELAY_IASIG, reflections_delay );
alEnvironmentiIASIG ( entornos[identificador], AL_ENV_REVERB_IASIG, reverb );
alEnvironmentfIASIG ( entornos[identificador], AL_ENV_REVERB_DELAY_IASIG, reverb_delay );
alEnvironmentfIASIG ( entornos[identificador], AL_ENV_DIFFUSION_IASIG, diffusion );
alEnvironmentfIASIG ( entornos[identificador], AL_ENV_DENSITY_IASIG, density );
alEnvironmentfIASIG ( entornos[identificador], AL_ENV_HIGH_FREQUENCY_REFERENCE_IASIG,
high_frequency_reference );
#endif
#ifdef _WIN32
/* Para windows se pueden crear y configurar entornos utilizando las extensiones EAX
que admiten algunas tarjetas Soundblaster. Pero como no sé si es gratuito la utilizacion
de dichas extensiones, de momento para windows no se generaran entornos
*/
#endif
}
OALAudioEngine::OALAudioEngine()
{
ALCdevice* device = alcOpenDevice(nullptr);
ALCcontext* context = alcCreateContext(device, 0);
alcMakeContextCurrent(context);
this->SetListenerPos(float3(0, 0, 0));
this->SetListenerVel(float3(0, 0, 0));
this->SetListenerOri(float3(0, 0, 1), float3(0, 1, 0));
alDistanceModel(AL_INVERSE_DISTANCE);
alDopplerFactor(1);
alDopplerVelocity(343); // m/s
}
void init()
{
s_al_device = alcOpenDevice(NULL);
CE_ASSERT(s_al_device, "Cannot open OpenAL audio device");
s_al_context = alcCreateContext(s_al_device, NULL);
CE_ASSERT(s_al_context, "Cannot create OpenAL context");
AL_CHECK(alcMakeContextCurrent(s_al_context));
CE_LOGD("OpenAL Vendor : %s", alGetString(AL_VENDOR));
CE_LOGD("OpenAL Version : %s", alGetString(AL_VERSION));
CE_LOGD("OpenAL Renderer : %s", alGetString(AL_RENDERER));
AL_CHECK(alDistanceModel(AL_INVERSE_DISTANCE_CLAMPED));
AL_CHECK(alDopplerFactor(1.0f));
AL_CHECK(alDopplerVelocity(343.0f));
}
static int Initialize(void *hnd)
{
ALCdevice *dev;
ALCcontext *ctxt;
ALCint attrs[3];
// TODO: Check for failures (generally, not just in this file).
dev = alcOpenDevice(NULL);
attrs[0] = ALC_FREQUENCY;
attrs[1] = RLX.Audio.SR_to_Khz[RLX.Audio.SamplingRate];
attrs[2] = 0;
ctxt = alcCreateContext(dev, (ALCint *)&attrs);
alcMakeContextCurrent(ctxt);
alDistanceModel(AL_INVERSE_DISTANCE);
alDopplerFactor(0.f); // No doppler
alDopplerVelocity(0.f); // No velocity
RLX.Audio.Config|=RLXAUDIO_Use3D;
return 0;
}
ALvoid CDECL wine_alDopplerVelocity(ALfloat value)
{
alDopplerVelocity(value);
}
void Engine_InitAL()
{
#if !NO_AUDIO
ALCint paramList[] = {
ALC_STEREO_SOURCES, TR_AUDIO_STREAM_NUMSOURCES,
ALC_MONO_SOURCES, (TR_AUDIO_MAX_CHANNELS - TR_AUDIO_STREAM_NUMSOURCES),
ALC_FREQUENCY, 44100, 0
};
Sys_DebugLog(LOG_FILENAME, "Probing OpenAL devices...");
const char *devlist = alcGetString(nullptr, ALC_DEVICE_SPECIFIER);
if (!devlist)
{
Sys_DebugLog(LOG_FILENAME, "InitAL: No AL audio devices!");
return;
}
while(*devlist)
{
Sys_DebugLog(LOG_FILENAME, " Device: %s", devlist);
ALCdevice* dev = alcOpenDevice(devlist);
if(audio_settings.use_effects)
{
if( alcIsExtensionPresent(dev, ALC_EXT_EFX_NAME) == ALC_TRUE )
{
Sys_DebugLog(LOG_FILENAME, " EFX supported!");
al_device = dev;
break;
}
else
{
alcCloseDevice(dev);
devlist += std::strlen(devlist)+1;
}
}
else
{
al_device = dev;
break;
}
}
al_context = alcCreateContext(al_device, paramList);
if(!al_context)
{
Sys_DebugLog(LOG_FILENAME, " Failed to create OpenAL context.");
alcCloseDevice(al_device);
al_device = nullptr;
return;
}
alcMakeContextCurrent(al_context);
Audio_LoadALExtFunctions(al_device);
std::string driver = "OpenAL library: ";
driver += alcGetString(al_device, ALC_DEVICE_SPECIFIER);
ConsoleInfo::instance().addLine(driver, FONTSTYLE_CONSOLE_INFO);
alSpeedOfSound(330.0 * 512.0);
alDopplerVelocity(330.0 * 510.0);
alDistanceModel(AL_LINEAR_DISTANCE_CLAMPED);
#endif
}
JNIEXPORT void JNICALL Java_org_lwjgl_openal_AL10_nalDopplerVelocity(JNIEnv *__env, jclass clazz, jfloat dopplerVelocity, jlong __functionAddress) {
alDopplerVelocityPROC alDopplerVelocity = (alDopplerVelocityPROC)(intptr_t)__functionAddress;
UNUSED_PARAMS(__env, clazz)
alDopplerVelocity(dopplerVelocity);
}
OpenalSoundInterface::OpenalSoundInterface(float sampling_rate, int n_channels): SoundInterface (sampling_rate, n_channels)
{
car_src = NULL;
ALfloat far_away[] = { 0.0f, 0.0f, 1000.0f };
ALfloat zeroes[] = { 0.0f, 0.0f, 0.0f };
ALfloat front[] = { 0.0f, 0.0f, 1.0f, 0.0f, 1.0f, 0.0f };
dev = alcOpenDevice( NULL );
if( dev == NULL ) {
throw ("Could not open device");
}
// Last zero is termination of the array, I think the current official beat SDK ignores that.
// ALCint attr[] = { ALC_MONO_SOURCES, 1024, ALC_STEREO_SOURCES, 0, 0};
cc = alcCreateContext( dev, NULL);
if(cc == NULL) {
alcCloseDevice( dev );
throw ("Could not create context.");
}
alcMakeContextCurrent( cc );
alcGetError(dev);
alGetError();
// Figure out the number of possible sources, watch out for an API update, perhaps
// one can get that easier later with al(c)GetInteger (I'm sure that there is no way to
// query this now) or even request a number with the context.
const int MAX_SOURCES = 1024;
int sources;
ALuint sourcelist[MAX_SOURCES];
for (sources = 0; sources < MAX_SOURCES; sources++) {
alGenSources(1, &sourcelist[sources]);
if (alGetError() != AL_NO_ERROR) {
break;
}
}
int clear;
for (clear = 0; clear < sources; clear++) {
if (alIsSource(sourcelist[clear])) {
alDeleteSources(1, &sourcelist[clear]);
if (alGetError() != AL_NO_ERROR) {
printf("Error in probing OpenAL sources.\n");
}
} else {
printf("Error in probing OpenAL sources.\n");
}
}
OSI_MAX_SOURCES = sources;
OSI_MAX_STATIC_SOURCES = MAX(0, OSI_MAX_SOURCES - OSI_MIN_DYNAMIC_SOURCES);
// Figure out the number of buffers.
int buffers;
ALuint bufferlist[MAX_SOURCES];
for (buffers = 0; buffers < MAX_SOURCES; buffers++) {
alGenBuffers(1, &bufferlist[buffers]);
if (alGetError() != AL_NO_ERROR) {
break;
}
}
for (clear = 0; clear < buffers; clear++) {
if (alIsBuffer(bufferlist[clear])) {
alDeleteBuffers(1, &bufferlist[clear]);
if (alGetError() != AL_NO_ERROR) {
printf("Error in probing OpenAL buffers.\n");
}
} else {
printf("Error in probing OpenAL buffers.\n");
}
}
OSI_MAX_BUFFERS = buffers;
printf("OpenAL backend info:\n Vendor: %s\n Renderer: %s\n Version: %s\n", alGetString(AL_VENDOR), alGetString(AL_RENDERER), alGetString(AL_VERSION));
printf(" Available sources: %d%s\n", OSI_MAX_SOURCES, (sources >= MAX_SOURCES) ? " or more" : "");
printf(" Available buffers: %d%s\n", OSI_MAX_BUFFERS, (buffers >= MAX_SOURCES) ? " or more" : "");
alDistanceModel ( AL_INVERSE_DISTANCE );
int error = alGetError();
if (error != AL_NO_ERROR) {
printf("OpenAL Error: %d alDistanceModel\n", error);
}
alDopplerFactor (1.0f);
//alSpeedOfSound (SPEED_OF_SOUND); // not defined in linux yet.
alDopplerVelocity (SPEED_OF_SOUND);
error = alGetError();
if (error != AL_NO_ERROR) {
printf("OpenAL Error: %d alDopplerX\n", error);
}
alListenerfv(AL_POSITION, far_away );
alListenerfv(AL_VELOCITY, zeroes );
alListenerfv(AL_ORIENTATION, front );
error = alGetError();
if (error != AL_NO_ERROR) {
printf("OpenAL Error: %d alListenerfv\n", error);
}
engpri = NULL;
global_gain = 1.0f;
// initialise mappings
grass.schar = &CarSoundData::grass;
grass_skid.schar = &CarSoundData::grass_skid;
road.schar = &CarSoundData::road;
metal_skid.schar = &CarSoundData::drag_collision;
backfire_loop.schar = &CarSoundData::engine_backfire;
turbo.schar = &CarSoundData::turbo;
axle.schar = &CarSoundData::axle;
n_static_sources_in_use = 0;
}
void lime_al_doppler_velocity (float velocity) {
alDopplerVelocity (velocity);
}
OPAL_SOUND_MGR bool SoundManager::init( void )
{
// It's an error to initialise twice OpenAl
if ( isInitialised ) return true;
// Open an audio device
mSoundDevice = alcOpenDevice( NULL ); // TODO ((ALubyte*) "DirectSound3D");
// mSoundDevice = alcOpenDevice( "DirectSound3D" );
// Check for errors
if ( !mSoundDevice )
{
printf( "SoundManager::init error : No sound device.\n");
return false;
}
mSoundContext = alcCreateContext( mSoundDevice, NULL );
// if ( checkAlError() || !mSoundContext ) // TODO seems not to work! why ?
if ( !mSoundContext )
{
printf( "SoundManager::init error : No sound context.\n");
return false;
}
// Make the context current and active
alcMakeContextCurrent( mSoundContext );
if ( checkALError( "Init()" ) )
{
printf( "SoundManager::init error : could not make sound context current and active.\n");
return false;
}
// Check for EAX 2.0 support and
// Retrieves function entry addresses to API ARB extensions, in this case,
// for the EAX extension. See Appendix 1 (Extensions) of
// http://www.openal.org/openal_webstf/specs/OpenAL1-1Spec_html/al11spec7.html
//
// TODO EAX fct not used anywhere in the code ... !!!
isEAXPresent = alIsExtensionPresent( "EAX2.0" );
if ( isEAXPresent )
{
printf( "EAX 2.0 Extension available\n" );
#ifdef _USEEAX
eaxSet = (EAXSet) alGetProcAddress( "EAXSet" );
if ( eaxSet == NULL )
isEAXPresent = false;
eaxGet = (EAXGet) alGetProcAddress( "EAXGet" );
if ( eaxGet == NULL )
isEAXPresent = false;
if ( !isEAXPresent )
checkALError( "Failed to get the EAX extension functions adresses.\n" );
#else
isEAXPresent = false;
printf( "... but not used.\n" );
#endif // _USEEAX
}
// Test if Ogg Vorbis extension is present
isOggExtensionPresent();
// Create the Audio Buffers
alGenBuffers( MAX_AUDIO_BUFFERS, mAudioBuffers );
if (checkALError("init::alGenBuffers:") )
return false;
// Generate Sources
alGenSources( MAX_AUDIO_SOURCES, mAudioSources );
if (checkALError( "init::alGenSources :") )
return false;
// Setup the initial listener parameters
// -> location
alListenerfv( AL_POSITION, position );
// -> velocity
alListenerfv( AL_VELOCITY, velocity );
// -> orientation
alListenerfv( AL_ORIENTATION, orientation );
// Gain
alListenerf( AL_GAIN, 1.0 );
// Initialise Doppler
alDopplerFactor( 1.0 ); // 1.2 = exaggerate the pitch shift by 20%
alDopplerVelocity( 343.0f ); // m/s this may need to be scaled at some point
// Ok
isInitialised = true;
isSoundOn = true;
printf( "SoundManager initialised.\n\n");
return true;
}
// ---------------------------------------------------------------------------------------
// ds3d_update_buffer()
//
// parameters: channel => identifies the 3D sound to update
// min => the distance at which sound doesn't get any louder
// max => the distance at which sound doesn't attenuate any further
// pos => world position of sound
// vel => velocity of the objects producing the sound
//
// returns: 0 => success
// -1 => failure
//
//
int ds3d_update_buffer(int channel, float min, float max, vec3d* pos, vec3d* vel)
{
if (DS3D_inited == FALSE)
return 0;
if (channel == -1)
return 0;
#ifdef USE_OPENAL
// as used by DS3D
// OpenAL_ErrorPrint( alDistanceModel(AL_INVERSE_DISTANCE_CLAMPED) );
// set the min distance
OpenAL_ErrorPrint( alSourcef(Channels[channel].source_id, AL_REFERENCE_DISTANCE, min) );
// set the max distance
// OpenAL_ErrorPrint( alSourcef(Channels[channel].source_id, AL_MAX_DISTANCE, max) );
OpenAL_ErrorPrint( alSourcef(Channels[channel].source_id, AL_MAX_DISTANCE, 40000.0f) );
// set rolloff factor
OpenAL_ErrorPrint( alSourcef(Channels[channel].source_id, AL_ROLLOFF_FACTOR, 1.0f) );
// set doppler
OpenAL_ErrorPrint( alDopplerVelocity(10000.0f) );
OpenAL_ErrorPrint( alDopplerFactor(0.0f) ); // TODO: figure out why using a value of 1 sounds bad
// set the buffer position
if ( pos != NULL ) {
ALfloat alpos[] = { pos->xyz.x, pos->xyz.y, pos->xyz.z };
OpenAL_ErrorPrint( alSourcefv(Channels[channel].source_id, AL_POSITION, alpos) );
}
// set the buffer velocity
if ( vel != NULL ) {
ALfloat alvel[] = { vel->xyz.x, vel->xyz.y, vel->xyz.z };
OpenAL_ErrorPrint( alSourcefv(Channels[channel].source_id, AL_VELOCITY, alvel) );
} else {
ALfloat alvel[] = { 0.0f, 0.0f, 0.0f };
OpenAL_ErrorPrint( alSourcefv(Channels[channel].source_id, AL_VELOCITY, alvel) );
}
#else
HRESULT hr;
LPDIRECTSOUND3DBUFFER pds3db;
float max_dist, min_dist;
pds3db = Channels[channel].pds3db;
Assert(pds3db != NULL);
// set the buffer position
if (pos != NULL)
{
hr = pds3db->SetPosition(pos->xyz.x, pos->xyz.y, pos->xyz.z, DS3D_DEFERRED);
}
// set the buffer veclocity
if (vel != NULL)
{
hr = pds3db->SetVelocity(vel->xyz.x, vel->xyz.y, vel->xyz.z, DS3D_DEFERRED);
}
else
{
hr = pds3db->SetVelocity(0.0f, 0.0f, 0.0f, DS3D_DEFERRED);
}
// set the min distance
hr = pds3db->GetMinDistance(&min_dist);
hr = pds3db->SetMinDistance(min, DS3D_DEFERRED);
// set the max distance
hr = pds3db->GetMaxDistance(&max_dist);
// hr = pds3db->SetMaxDistance( max, DS3D_DEFERRED );
hr = pds3db->SetMaxDistance(100000.0f, DS3D_DEFERRED);
#endif
return 0;
}
void al_dopplervelocity( int nlhs, mxArray *plhs[], int nrhs, const mxArray *prhs[] ) {
if (NULL == alDopplerVelocity) mogl_glunsupported("alDopplerVelocity");
alDopplerVelocity((ALfloat)mxGetScalar(prhs[0]));
}
value lime_al_doppler_velocity (value velocity) {
alDopplerVelocity (val_float (velocity));
return alloc_null ();
}
//*****************************************************************************
// alDopplerVelocity
//*****************************************************************************
//
ALAPI ALvoid ALAPIENTRY alDopplerVelocity(ALfloat value)
{
AL_VOID_FXN(alDopplerVelocity(value));
}