// open & setup audio device
// return: 1=success 0=fail
static int init(int rate, int channels, int format, int flags) {

  int smpwidth, smpfmt;
  int rv = AL_DEFAULT_OUTPUT;

  smpfmt = fmt2sgial(&format, &smpwidth);

  mp_msg(MSGT_AO, MSGL_INFO, MSGTR_AO_SGI_InitInfo, rate, (channels > 1) ? "Stereo" : "Mono", af_fmt2str_short(format));

  { /* from /usr/share/src/dmedia/audio/setrate.c */

    double frate, realrate;
    ALpv x[2];

    if(ao_subdevice) {
      rv = alGetResourceByName(AL_SYSTEM, ao_subdevice, AL_OUTPUT_DEVICE_TYPE);
      if (!rv) {
	mp_msg(MSGT_AO, MSGL_ERR, MSGTR_AO_SGI_InvalidDevice);
	return 0;
      }
    }

    frate = rate;

    x[0].param = AL_RATE;
    x[0].value.ll = alDoubleToFixed(rate);
    x[1].param = AL_MASTER_CLOCK;
    x[1].value.i = AL_CRYSTAL_MCLK_TYPE;

    if (alSetParams(rv,x, 2)<0) {
      mp_msg(MSGT_AO, MSGL_WARN, MSGTR_AO_SGI_CantSetParms_Samplerate, alGetErrorString(oserror()));
    }

    if (x[0].sizeOut < 0) {
      mp_msg(MSGT_AO, MSGL_WARN, MSGTR_AO_SGI_CantSetAlRate);
    }

    if (alGetParams(rv,x, 1)<0) {
      mp_msg(MSGT_AO, MSGL_WARN, MSGTR_AO_SGI_CantGetParms, alGetErrorString(oserror()));
    }

    realrate = alFixedToDouble(x[0].value.ll);
    if (frate != realrate) {
      mp_msg(MSGT_AO, MSGL_INFO, MSGTR_AO_SGI_SampleRateInfo, realrate, frate);
    }
    sample_rate = (int)realrate;
  }

  bytes_per_frame = channels * smpwidth;

  ao_data.samplerate = sample_rate;
  ao_data.channels = channels;
  ao_data.format = format;
  ao_data.bps = sample_rate * bytes_per_frame;
  ao_data.buffersize=131072;
  ao_data.outburst = ao_data.buffersize/16;

  ao_config = alNewConfig();

  if (!ao_config) {
    mp_msg(MSGT_AO, MSGL_ERR, MSGTR_AO_SGI_InitConfigError, alGetErrorString(oserror()));
    return 0;
  }

  if(alSetChannels(ao_config, channels) < 0 ||
     alSetWidth(ao_config, smpwidth) < 0 ||
     alSetSampFmt(ao_config, smpfmt) < 0 ||
     alSetQueueSize(ao_config, sample_rate) < 0 ||
     alSetDevice(ao_config, rv) < 0) {
    mp_msg(MSGT_AO, MSGL_ERR, MSGTR_AO_SGI_InitConfigError, alGetErrorString(oserror()));
    return 0;
  }

  ao_port = alOpenPort("mplayer", "w", ao_config);

  if (!ao_port) {
    mp_msg(MSGT_AO, MSGL_ERR, MSGTR_AO_SGI_InitOpenAudioFailed, alGetErrorString(oserror()));
    return 0;
  }

  // printf("ao_sgi, init: port %d config %d\n", ao_port, ao_config);
  queue_size = alGetQueueSize(ao_config);
  return 1;

}
Exemple #2
0
static int open_sgi(audio_output_t *ao)
{
	int dev = AL_DEFAULT_OUTPUT;
	ALconfig config = alNewConfig();
	ALport port = NULL;
	
	/* Test for correct completion */
	if (config == 0) {
		error1("open_sgi: %s",alGetErrorString(oserror()));
		return -1;
	}
	
	/* Set port parameters */
	if(ao->channels == 2)
		alSetChannels(config, AL_STEREO);
	else
		alSetChannels(config, AL_MONO);
	
	alSetWidth(config, AL_SAMPLE_16);
	alSetSampFmt(config,AL_SAMPFMT_TWOSCOMP);
	alSetQueueSize(config, 131069);
	
	/* Setup output device to specified module. If there is no module
	specified in ao structure, use the default four output */
	if ((ao->device) != NULL) {
		char *dev_name;
		
		dev_name=malloc((strlen(ao->device) + strlen(analog_output_res_name) + 1) *
		  sizeof(char));
		
		strcpy(dev_name,ao->device);
		strcat(dev_name,analog_output_res_name);
		
		/* Find the asked device resource */
		dev=alGetResourceByName(AL_SYSTEM,dev_name,AL_DEVICE_TYPE);
		
		/* Free allocated space */
		free(dev_name);
		
		if (!dev) {
			error2("Invalid audio resource: %s (%s)",dev_name, alGetErrorString(oserror()));
			return -1;
		}
	}
	
	/* Set the device */
	if (alSetDevice(config,dev) < 0)
	{
		error1("open_sgi: %s",alGetErrorString(oserror()));
		return -1;
	}
	
	/* Open the audio port */
	port = alOpenPort("mpg123-VSC", "w", config);
	if(port == NULL) {
		error1("Unable to open audio channel: %s", alGetErrorString(oserror()));
		return -1;
	}
	
	ao->userptr = (void*)port;
	
	
	set_format(ao, config);
	set_channels(ao, config);
	set_rate(ao, config);
	
	
	alFreeConfig(config);
	
	return 1;
}
Exemple #3
0
// open & setup audio device
// return: 1=success 0=fail
static int init(int rate, int channels, int format, int flags) {

  int smpwidth, smpfmt;
  int rv = AL_DEFAULT_OUTPUT;

  smpfmt = fmt2sgial(&format, &smpwidth);

  mp_tmsg(MSGT_AO, MSGL_INFO, "[AO SGI] init: Samplerate: %iHz Channels: %s Format %s\n", rate, (channels > 1) ? "Stereo" : "Mono", af_fmt2str_short(format));

  { /* from /usr/share/src/dmedia/audio/setrate.c */

    double frate, realrate;
    ALpv x[2];

    if(ao_subdevice) {
      rv = alGetResourceByName(AL_SYSTEM, ao_subdevice, AL_OUTPUT_DEVICE_TYPE);
      if (!rv) {
	mp_tmsg(MSGT_AO, MSGL_ERR, "[AO SGI] play: invalid device.\n");
	return 0;
      }
    }

    frate = rate;

    x[0].param = AL_RATE;
    x[0].value.ll = alDoubleToFixed(rate);
    x[1].param = AL_MASTER_CLOCK;
    x[1].value.i = AL_CRYSTAL_MCLK_TYPE;

    if (alSetParams(rv,x, 2)<0) {
      mp_tmsg(MSGT_AO, MSGL_WARN, "[AO SGI] init: setparams failed: %s\nCould not set desired samplerate.\n", alGetErrorString(oserror()));
    }

    if (x[0].sizeOut < 0) {
      mp_tmsg(MSGT_AO, MSGL_WARN, "[AO SGI] init: AL_RATE was not accepted on the given resource.\n");
    }

    if (alGetParams(rv,x, 1)<0) {
      mp_tmsg(MSGT_AO, MSGL_WARN, "[AO SGI] init: getparams failed: %s\n", alGetErrorString(oserror()));
    }

    realrate = alFixedToDouble(x[0].value.ll);
    if (frate != realrate) {
      mp_tmsg(MSGT_AO, MSGL_INFO, "[AO SGI] init: samplerate is now %f (desired rate is %f)\n", realrate, frate);
    }
    sample_rate = (int)realrate;
  }

  bytes_per_frame = channels * smpwidth;

  ao_data.samplerate = sample_rate;
  ao_data.channels = channels;
  ao_data.format = format;
  ao_data.bps = sample_rate * bytes_per_frame;
  ao_data.buffersize=131072;
  ao_data.outburst = ao_data.buffersize/16;

  ao_config = alNewConfig();

  if (!ao_config) {
    mp_tmsg(MSGT_AO, MSGL_ERR, "[AO SGI] init: %s\n", alGetErrorString(oserror()));
    return 0;
  }

  if(alSetChannels(ao_config, channels) < 0 ||
     alSetWidth(ao_config, smpwidth) < 0 ||
     alSetSampFmt(ao_config, smpfmt) < 0 ||
     alSetQueueSize(ao_config, sample_rate) < 0 ||
     alSetDevice(ao_config, rv) < 0) {
    mp_tmsg(MSGT_AO, MSGL_ERR, "[AO SGI] init: %s\n", alGetErrorString(oserror()));
    return 0;
  }

  ao_port = alOpenPort("mplayer", "w", ao_config);

  if (!ao_port) {
    mp_tmsg(MSGT_AO, MSGL_ERR, "[AO SGI] init: Unable to open audio channel: %s\n", alGetErrorString(oserror()));
    return 0;
  }

  // printf("ao_sgi, init: port %d config %d\n", ao_port, ao_config);
  queue_size = alGetQueueSize(ao_config);
  return 1;

}
Exemple #4
0
static int open_sgi(audio_output_t *ao)
{
	int current_dev;
	ALport port = NULL;
	ALconfig config = alNewConfig();

	ao->userptr = NULL;

	/* Test for correct completion */
	if(config == 0)
	{
		error1("open_sgi: %s", alGetErrorString(oserror()));
		return -1;
	}

	/* Setup output device to specified device name. If there is no device name
	specified in ao structure, use the default for output */
	if((ao->device) != NULL)
	{
		current_dev = alGetResourceByName(AL_SYSTEM, ao->device, AL_OUTPUT_DEVICE_TYPE);

		debug2("Dev: %s %i", ao->device, current_dev);

		if(!current_dev)
		{
			int i, numOut;
			char devname[32];
			ALpv pv[1];
			ALvalue *alvalues;

			error2("Invalid audio resource: %s (%s)", ao->device, alGetErrorString(oserror()));

			if((numOut= alQueryValues(AL_SYSTEM,AL_DEFAULT_OUTPUT,0,0,0,0))>=0)
			fprintf(stderr, "There are %d output devices on this system.\n", numOut);
			else
			{
				fprintf(stderr, "Can't find output devices. alQueryValues failed: %s\n", alGetErrorString(oserror()));
				goto open_sgi_bad;
			}

			alvalues = malloc(sizeof(ALvalue) * numOut);
			i = alQueryValues(AL_SYSTEM, AL_DEFAULT_OUTPUT, alvalues, numOut, pv, 0);
			if(i == -1)
			error1("alQueryValues: %s", alGetErrorString(oserror()));
			else
			{
				for(i=0; i < numOut; i++)
				{
					pv[0].param = AL_NAME;
					pv[0].value.ptr = devname;
					pv[0].sizeIn = 32;
					alGetParams(alvalues[i].i, pv, 1);

					fprintf(stderr, "%i: %s\n", i, devname);
				}
			}
			free(alvalues);

			goto open_sgi_bad;
		}

		if(alSetDevice(config, current_dev) < 0)
		{
			error1("open: alSetDevice : %s",alGetErrorString(oserror()));
			goto open_sgi_bad;
		}
	} else
	current_dev = AL_DEFAULT_OUTPUT;

	/* Set the device */
	if(alSetDevice(config, current_dev) < 0)
	{
		error1("open_sgi: %s", alGetErrorString(oserror()));
		goto open_sgi_bad;
	}

	/* Set port parameters */

	if(alSetQueueSize(config, 131069) < 0)
	{
		error1("open_sgi: setting audio buffer failed: %s", alGetErrorString(oserror()));
		goto open_sgi_bad;
	}
	
	if(   set_format(ao, config) < 0
	   || set_rate(ao, config) < 0
	   || set_channels(ao, config) < 0 )
	goto open_sgi_bad;
	
	/* Open the audio port */
	port = alOpenPort("mpg123-VSC", "w", config);
	if(port == NULL)
	{
		error1("Unable to open audio channel: %s", alGetErrorString(oserror()));
		goto open_sgi_bad;
	}

	ao->userptr = (void*)port;

	alFreeConfig(config);
	return 1;

open_sgi_bad:
	/* clean up and return error */
	alFreeConfig(config);
	return -1;
}