C++ (Cpp) apq8064_add_uio Exemples

Exemple #1

Fichier : board-8064-storage.c Projet : DSMKexec/kexec-kernel-a850s

void __init apq8064_init_mmc(void)
{
	if (apq8064_sdc1_pdata) {
		/* 8064 v2 supports upto 200MHz clock on SDC1 slot */
		if (SOCINFO_VERSION_MAJOR(socinfo_get_version()) >= 2) {
			apq8064_sdc1_pdata->sup_clk_table =
					sdc1_sup_clk_rates_all;
			apq8064_sdc1_pdata->sup_clk_cnt	=
					ARRAY_SIZE(sdc1_sup_clk_rates_all);
		}
		apq8064_add_sdcc(1, apq8064_sdc1_pdata);
		apq8064_add_uio();
	}

	if (apq8064_sdc2_pdata)
		apq8064_add_sdcc(2, apq8064_sdc2_pdata);

	if (apq8064_sdc3_pdata) {
		if (!machine_is_apq8064_cdp()) {
			apq8064_sdc3_pdata->wpswitch_gpio = 0;
			apq8064_sdc3_pdata->is_wpswitch_active_low = false;
		}
		if (machine_is_mpq8064_cdp() || machine_is_mpq8064_hrd() ||
			machine_is_mpq8064_dtv()) {
			int rc;
			struct pm_gpio sd_card_det_init_cfg = {
				.direction      = PM_GPIO_DIR_IN,
				.output_buffer  = PM_GPIO_OUT_BUF_CMOS,
				.pull           = PM_GPIO_PULL_UP_30,
				.vin_sel        = PM_GPIO_VIN_S4,
				.out_strength   = PM_GPIO_STRENGTH_NO,
				.function       = PM_GPIO_FUNC_NORMAL,
			};

			apq8064_sdc3_pdata->status_gpio =
				PM8921_GPIO_PM_TO_SYS(31);
			apq8064_sdc3_pdata->status_irq =
				PM8921_GPIO_IRQ(PM8921_IRQ_BASE, 31);
			rc = pm8xxx_gpio_config(apq8064_sdc3_pdata->status_gpio,
					&sd_card_det_init_cfg);
			if (rc) {
				pr_info("%s: SD_CARD_DET GPIO%d config "
					"failed(%d)\n", __func__,
					apq8064_sdc3_pdata->status_gpio, rc);
				apq8064_sdc3_pdata->status_gpio = 0;
				apq8064_sdc3_pdata->status_irq = 0;
			}
		}
		if (machine_is_apq8064_cdp()) {
			int i;

			for (i = 0;
			     i < apq8064_sdc3_pdata->pin_data->pad_data->\
				 drv->size;
			     i++)
				apq8064_sdc3_pdata->pin_data->pad_data->\
					drv->on[i].val = GPIO_CFG_10MA;
		}
		apq8064_add_sdcc(3, apq8064_sdc3_pdata);
	}

Exemple #2

Fichier : board-8064-storage.c Projet : Hybridmax/I9505_Hybridmax-Stock_Kernel

void __init apq8064_init_mmc(void)
{
	if (apq8064_sdc1_pdata) {
		/* 8064 v2 supports upto 200MHz clock on SDC1 slot */
		if (SOCINFO_VERSION_MAJOR(socinfo_get_version()) >= 2) {
			apq8064_sdc1_pdata->sup_clk_table =
					sdc1_sup_clk_rates_all;
			apq8064_sdc1_pdata->sup_clk_cnt	=
					ARRAY_SIZE(sdc1_sup_clk_rates_all);
		}
		apq8064_add_sdcc(1, apq8064_sdc1_pdata);
		apq8064_add_uio();
	}
#if defined(CONFIG_MACH_JFVE_EUR)
	apq8064_sdc2_pdata = NULL;
	apq8064_sdc4_pdata = NULL;

	// SDC3 is used for External memory Card
	if (apq8064_sdc3_pdata)
   {  
		apq8064_sdc3_pdata->status_gpio = PM8921_GPIO_PM_TO_SYS(33);
		apq8064_sdc3_pdata->status_irq	= PM8921_GPIO_IRQ(PM8921_IRQ_BASE, 33);

		apq8064_add_sdcc(3, apq8064_sdc3_pdata);
   }
#else
/*
	if (apq8064_sdc2_pdata)
		apq8064_add_sdcc(2, apq8064_sdc2_pdata);
*/
/* system_rev 0x05 or more
 * SDC3 is used for WIFI
    SDC4 is used for External memory Card
 */
	if (apq8064_sdc3_pdata) {

#ifdef CONFIG_MMC_MSM_SDC4_SUPPORT
		mmc_vdd_reg_data[SDCC3].high_vol_level = 1800000;
		mmc_vdd_reg_data[SDCC3].low_vol_level = 1800000;
		mmc_slot_vreg_data[SDCC3].vdd_io_data = NULL;
		apq8064_sdc3_pdata->status_irq = 0;
		apq8064_sdc3_pdata->status_gpio = 0;
#endif
#if !defined(CONFIG_BCM4335) && !defined(CONFIG_BCM4335_MODULE)
		if (!machine_is_apq8064_cdp()) {
			apq8064_sdc3_pdata->wpswitch_gpio = 0;
			apq8064_sdc3_pdata->is_wpswitch_active_low = false;
		}
		if (machine_is_mpq8064_cdp() || machine_is_mpq8064_hrd() ||
			machine_is_mpq8064_dtv()) {
			int rc;
			struct pm_gpio sd_card_det_init_cfg = {
				.direction      = PM_GPIO_DIR_IN,
				.output_buffer  = PM_GPIO_OUT_BUF_CMOS,
				.pull           = PM_GPIO_PULL_UP_30,
				.vin_sel        = PM_GPIO_VIN_S4,
				.out_strength   = PM_GPIO_STRENGTH_NO,
				.function       = PM_GPIO_FUNC_NORMAL,
			};

			apq8064_sdc3_pdata->status_gpio =
				PM8921_GPIO_PM_TO_SYS(31);
			apq8064_sdc3_pdata->status_irq =
				PM8921_GPIO_IRQ(PM8921_IRQ_BASE, 31);
			rc = pm8xxx_gpio_config(apq8064_sdc3_pdata->status_gpio,
					&sd_card_det_init_cfg);
			if (rc) {
				pr_info("%s: SD_CARD_DET GPIO%d config "
					"failed(%d)\n", __func__,
					apq8064_sdc3_pdata->status_gpio, rc);
				apq8064_sdc3_pdata->status_gpio = 0;
				apq8064_sdc3_pdata->status_irq = 0;
			}
		}
		if (machine_is_apq8064_cdp()) {
			int i;

			for (i = 0;
			     i < apq8064_sdc3_pdata->pin_data->pad_data->\
				 drv->size;
			     i++)
				apq8064_sdc3_pdata->pin_data->pad_data->\
					drv->on[i].val = GPIO_CFG_10MA;
		}
#endif
		apq8064_add_sdcc(3, apq8064_sdc3_pdata);
	}